14 best rode dslr microphones

Product description

Rode VideoMic go Light weight on-camera microphone.

• Delivers clear, crisp, directional audio with incredible ease of use
• Rode designed the videomic go with a tight pickup area that focuses directly in front of the mic
• Reduces other surrounding sounds, ensuring that your subject is isolated from background noise
• The integrated Rycote lyre shock mount isolates the video mic go from bumps and vibrations
• No complicated switches or settings and is powered by your camera's external microphone input, required

User questions & answers

Question:	does this mic record stereo sound or just mono? and does it let the onboard mic record as well or not
Answer:	The microphone is a dual mono microphone and thus not stereo, unless you get into the very expensive stereo microphones I think you'll be pleased with the frequency response and quality. Once plugged in, the on-board microphone is cancelled out.
Question:	Can you attach this to a boom pole
Answer:	I believe rode sells a boom pole for this mic. You will need an extension cable as well to plug it in.
Question:	Does this work with Canon 70d? Thanks
Answer:	Yes it does I have the rode mic pro lyre version and it works perfectly I will say if you can afford the pro get it it cause this relies on the power of the camera so the sound isn't as good as the pro
Question:	Should I get a used Rode Video Mic Shotgun Microphone or The rode Videomic go? assume I can't go far over 100$ in budget
Answer:	Best qualities of the Videomic Go: Small, no battery (powered from the camera), easy to transport. Best qualities of the Rode Videomic over the Videomic Go: Battery powered (better range), high pass filter, PAD switch (for reducing sensitivity on louder recordings). Not having a battery can be nice (using the GO), but the camera you use has to be able to power over the 1/8" mic input. The high pass filter and PAD switch are nice on the Videomic, but not always necessary. If you don't think you'll need them, then the Videomic GO is the way to go.

Product features

Rode VideoMic GO

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote Lyre shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

The VideoMic GO is designed and made in Australia.

Product description

The RODE VideoMic is a professional grade shotgun microphone. Based on the latest Film industry technology, the VideoMic is designed specifically for use with high quality digital video cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9 V battery and offers a low battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. RODE VideoMic Shotgun Microphone Features Broadcast and studio sound quality Rugged reinforced ABS construction two step high-pass filter - flat or 80 Hz integrated shock mount 9 V battery operation condenser transducer low noise circuitry low handling noise includes windscreen integrated camera-shoe mount. Connector: 1/8"

• Compact TRRS cardioid microphone designed for iOS devices and smartphones
• High-quality directional microphone that connects directly to the iPhone TRRS microphone/headphone socket
• 3.5mm headphone output. 9 V battery operation
• Frequency Range 40Hz - 20kHz. Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL)

User questions & answers

Question:	will it work on t3i and fisheye
Answer:	Yes!!!
Question:	Does this work with the canon t2i
Answer:	Yes the t2i has a mic input. Which is compatible with this mic.
Question:	I just purchased a new Nikon D5200, any issues with this camera and using this product
Answer:	No issues. It will improve the audio immensely. Experiment on whether to use setting 1, 2, or 3 for mic level in camera will suit your needs. I go to the zoom h1 for recording but you can go to the camera direct.
Question:	Is this a stereo mic or does it just record the same audio to both L and R channels
Answer:	It is not the stereo mic it records the same. Rhode does make a stereo mic as well.

Product features

RODE VideoMic

The RODE VideoMic is a professional grade 1/2 inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders. The VideoMic CPK Package includes the VideoMic along with various accessories: Windshield, Boom Pole, Microphone screw adaptor, and 25 feet. Headphone extension cable.

The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides high quality acoustic suspension and will never wear out, sag or snap.

Its standard sized shoe mount also includes a 3/8 inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.

In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

Product description

The Rode VideoMic Pro R is a compact and lightweight on-camera microphone, suitable for professional setups. It is designed to be used with camcorders, SLR cameras, and portable audio receivers. Equipped with a broadcast-quality condenser capsule, combined with a supercardioid pickup pattern, this wired microphone captures precise audio from the front while blocking out distortions. It includes an integrated shock mount and windscreen for added functionality. Camera shoe mount with 3/8 Inch thread for easy boompole mounting.

• ENSURE YOU BUY GENIUNE RØDE PRODUCTS. Products from sellers which say ‘fulfilled by Amazon’ under the price are NOT authorized resellers, and may not be selling genuine product.
• A true shotgun microphone designed for camcorders, DSLR cameras and portable audio recorders as primary and reference audio
• The 1/2" condenser capsule provides broadcast-quality audio via a 3.5mm connector with an incredibly low self-noise of just 14db
• The Rycote Lyre based shock mounting system provides isolation from external factors that may cause unwanted rumble and vibrations

User questions & answers

Question:	Will this microphone eliminate the autofocus sound of a USM lens
Answer:	Yes being isolated from the camera it wont pick up that sound like the cameras internal speaker would.
Question:	Will this connect to the Sony a
Answer:	No, the Sony A6000 does not have a mic jack. You would be better off purchasing the Sony ECM-XYST1M Stereo Microphone which actually provides just as good if not better recording capability. I own both and can testify to this.
Question:	In what ways is the rode video mic pro different then the video mic pro plus? i will be using it on a mirrorless lumix dmc-g85. please help
Answer:	The Pro Plus is a new and improved version of the popular VideoMic Pro. It looks similar from the outside (although, the pro is quite a bit smaller), but has some much-needed upgrades like automatic power switching. The Pro Plus will turn on when plugged into the camera or switch itself off when unplugged.
Question:	What is the distance range of this mic
Answer:	Not exactly sure what the range would be, but can stand 10-15 feet away and the audio is just fine.

Product features

RØDE VideoMic Pro

The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

Product description

VideoMicro Compact Directional On-Camera Microphone. The VideoMicro is a compact microphone designed to improve the audio quality of your videos. The VideoMicro reduces distracting peripheral sounds and focuses on the audio in front of the camera. Its pickup is more forgiving than other on-camera microphones, providing a more natural sound when recording indoors. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shockmount. Featuring a suspension structure composed of a rugged thermoplastic, it is far more effective at minimizing unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. He follows cameras unfortunately do not support the VideoMicro are Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.

• Buy only from Amazon.com (labelled ‘shipped and sold by Amazon.com’)
• Compact microphone designed to improve the audio quality of your videos - only 80 millimeter (3") long and 42gm (1.5 ounce)
• No battery required (powered by camera plug-in power - min 3V)
• Includes Rycote lyre shock mount and deluxe furry windshield

Product features

Rode VideoMicro

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount.

Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.

Product description

Rode VMPRPLUS Videomic Pro-R+ On-Camera Shotgun Condenser Microphone. Dual mono unbalanced output. Gauges: .011, .015, .023, .032, .042, .052.

• Still with the best-in-class Rycote Lyre suspension system onboard, the VideoMic Pro+ improves on the existing VideoMic Pro capsule/line tube and windshield, plus boasts a host of new features.
• Automatic Power Function (with plug-in power availability) is perfect for the run-and-gun shooter, automatically turning the microphone off when unplugged from the camera.
• Built-in Battery Door makes replacing the battery a breeze - plus it won't get lost.
• Power options the VideoMic Pro+ can be powered by the all-new and included RØDE LB-1 Lithium-Ion Rechargeable Battery, 2 x AA Batteries or continuously via Micro USB.
• Digital Switching - will ensure the user has ultimate capture of the audio signal at the source, reducing post production and editing times.

User questions & answers

Question:	If i powered this through a usb, and it were to accidentally come unplugged would it automatically switch to it's internal battery power? or turn off
Answer:	I would suggest actually testing that to find out during an actual audio session what happens before it actually happening during a session where you need it to work 100% of the time.
Question:	Can i use it with a go pro hero
Answer:	With an adapter for mounting you could but this mic is huge compared to a go pro size wise.
Question:	Can i pair the rode videomic pro + with rycote lyre with canon rebel t7i
Answer:	Yes no problem whatsoever as long as you have a 3.5mm mic jack.
Question:	Is there some way to attach this to a phone
Answer:	Yes but you will need one of their SC4 adapter cable.

Product features

Rode VideoMic Pro+

The RØDE VideoMic Pro+ is an addition to the best-in-market on-camera category. It is one of the true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.Still with the best-in-class Rycote Lyre suspension system onboard, the VideoMic Pro+ improves on the existing VideoMic Pro capsule/line tube and windshield, plus boasts a host of new features.

Product description

The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders. The integrated Rycote shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on the included boom pole and adaptor. The On Stage MBP7000 boom pole is machined from a sturdy and lightweight aluminum, which allows you to mount your microphone securely and follow your sound source with ease. It features three telescopic rods that utilize a twist-and-lock system, creating quick, simple and efficient settings extending the length from 3.1-8.1 feet. This package also includes a 25 ft. extension cable in order to connect the Videomic to your camera when mounted on a fully extended boom pole. Its super cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80 Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10 dB and -20 dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport. The new RØDE VideoMic features an integrated shock mount based on Rycote Lyre technology. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The RØDE VideoMic directional on-camera microphone is covered by RØDE Microphones' industry-leading 10-year warranty.

• A professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders
• The Rycote Lyre shock mounting system provides isolation from external factors that may cause unwanted rumble and vibrations
• The standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand
• Employs a super-cardioid polar pattern for highly directional recording, focusing on the subject in front of the camera
• Features a native 40Hz-20kHz response and a high-pass filter at 80Hz to prevent low-end noise such as traffic from being recorded
• A -10dB and -20dB level attenuation (or PAD) allows recording of loud sound sources, such as live music or motorsport

Product description

Remarkably clear directional audio on the go! The Rode VideoMic GO Light Weight On-Camera Microphone delivers clear, crisp, directional audio with incredible ease of use. Rode designed the VideoMic GO with a tight pickup area that focuses directly in front of the mic and reduces other surrounding sounds, ensuring that your subject is isolated from background noise. The integrated Rycote Lyre shock mount isolates the VideoMic GO from bumps and vibrations that could otherwise interfere with your sound. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Rode VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

• Lightweight Design - At only 73gm (2.5oz) it's RODE's lightest on-camera microphone.
• Integrated Rycote Lyre - Hard wearing and super-effective isolation from bumps and vibration.
• No Battery necessary - With the camera's plug-in power all you need to do is plug in and GO.
• Kit Includes: Rode VideoMic GO Shotgun Microphone + Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO + TheImagingWorld Micro Fiber Cleaning Cloth
• Limited 2-Year Warranty

User questions & answers

Question:	Can you clamp this to a desk
Answer:	A desk clamp, or any clamp comes with this product. It has a circular piece at the bottom that slides into a a lot on top of a camera or tripod.
Question:	Will this mic work on a cannon m50 ? is it a huge drain on the camera battery? would it cut your video time in half
Answer:	It will work on the Canon M50 It will not drain your battery
Question:	Can i use this for the g7 x mark ii
Answer:	You don't have a microphone port on the g7 x mark ii so you can't use any external microphone.
Question:	Will this work with the Canon EIS T6, with a 2.5 output
Answer:	Yes

• UNIVERSAL COMPATIBILITY: For iPhone, Androids, Cameras, Camcorders, Audio Recorders, Tablets, and Laptops. Use as iPhone microphone or DSLR microphone
• PROFESSIONAL MOVO MIC: The durable aluminum construction and battery-free design includes a sturdy integrated shock mount to minimize handling noise
• 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help - NOTE: To reduce hiss when using the mic on a DSLR camera, we recommend using manual audio levels, accessible from your camera’s menu.
• CREATE: Essential compact shotgun microphone for recording YouTube Vlogs, Tik Tok, interviews, family vacation trips, live music, outdoor events, tutorials.
• INCLUDES: Furry "Deadcat" Windscreen, Soft Case, 3.5mm TRS Output Cable (For DSLR Cameras, Camcorders, Recorders), 3.5mm TRRS Output Cable (For Smartphones, Tablets, and Mac)

• 【Low-cut Filter & 10dB Sensitivity Adjustment】The CVM-V30PRO Lightweight microphone has low-cut filter function and 10dB Sensitivity Adjustment. You can choose the low-cut mode when you are in the noisy environment and you can adjust the sensitivity from -38dB to -28dB as per your need.
• 【Excellent shock-absorbing】Shock-resistant structural design can effectively reduce vibration noise. Which can primely prevent the noise of the jitter during video shooting and provides your video with more excellent voice.
• 【Super-Cardioid Polar Pattern】The CVM-V30 PRO shotgun microphone is giving excellent off-axis rejection for desired sounds, which can effectively reduce the noise of the surrounding environment to be picked up.
• 【Product Features】Comica CVM-V30 PRO microphone supports all cameras that come with 3.5mm(TRS) audio input jack. (Not available for Canon T5/T6/T7) The 1/4 external port design can help you mount the microphone to your camera easily. Our this video microphone is Powered by 3A battery. (Batteries are not included)
• 【What’s in the box】1* CVM-V30 PRO Microphone 1* Windscreen 1*English User's Manual. Please feel free to contact us if you have any questions.

User questions & answers

Question:	Can’t get it to work on my iphone 8+ or wife’s iphone x. i tried 2 adapters- movo mc3 trs to trrs and rode sc4 3.5mm. does not work. any suggestions
Answer:	Hello, We apologize for the inconvenience. You first check the following: 1. Whether the battery is installed properly. 2. Is iPhone set to allow external microphone 3. Is there a green light on the microphone? If it still doesn't work, please contact us for more help. COMICA
Question:	Does it work with a panasonic hc-v
Answer:	Sorry, panasonic hc-v770 does not seem to have microphone interface，can not connect our microphone，so it is not compatible. VC MALL
Question:	Does it work with a windows pc? (using 3.5mm microphone input
Answer:	Yes it will by May I suggest a very HELPFUL PIECE OF ADVICE. These mics are designed for a purpose, shooting sound on a DSLR, and that usually means adjusting in post production. If you are all set and going to do that fine. If NOT, I may suggest an inexpensive preamp. It offers volume in dials at the point of sound input, you can adjust at will. True HDSLR shooters use high end separate recording devices by Tascam etc. I Do. But I found the Hammer and Anvil both 2 mono or 1 stereo,( this case), inputs, a M/S switch on front and semper are L R volume knobs, all you need is a 3.5 Stereo line,( I believe is included ), into the pc. The Comica Mounts to the preamp, and it mount to either a hotshoe, coldshoe stand, or adapter, or 1/4-20 std bolt. I got one for my nephew for $18.99, the identical Tascam version was $49, food for thought. Hope it helps.
Question:	Does this work with smartphones
Answer:	Yes it works, but you should buy adapter to work together. For adapter , it depends on your smartphone's audio jack type... VC MALL

Product features

Comica CVM-V30 PRO Microphone

Please note:

1.The shotgun mic needs to use 3A battery. (Batteries are not included in the package)

2.The mic is 3.5mm TRS jack, please confirm whether your device is 3.5mm TRS jack, if not, you need the corresponding adapter cable.

Main Features:

Product description

Compact and light weight by design, the VideoMic GO deliversclear, crisp, directional audio with incredible ease of use. Its tight pickuparea focuses directly in front of the microphone and reduces other surroundingsounds, ensuring that your subject is isolated from distracting backgroundnoise.

The integrated Rycote Lyreshock mount isolates your microphone from bumps and vibrations that couldotherwise interfere with your sound.

Constructed from a singlepiece of hard-wearing thermoplastic, the Lyre provides superior acousticsuspension to traditional elastic solutions, and will never wear out, sag orsnap.

The VideoMic GO has nocomplicated switches or settings and is powered by your camera's externalmicrophone input, requiring no batteries to operate, ensuring you never miss agreat shot.

Professional On The Go Microphone:

The Rode VMGO is designed to be used on almost all cameras and in all situations where you need an effective lightweight microphone that can be attached and removed from your camera quickly and easily. 

Bundle Includes:

 Rode Video Mic, Multicolored, No Size (VMGO)

1 Year Extended Warranty 

• Compact TRRS cardioid microphone designed for iOS devices and smartphones
• High-quality directional microphone that connects directly to the iPhone TRRS microphone/headphone socket
• 3.5mm headphone output
• Except for Iphone 7.
• Equivalent Noise Level (A-weighted) -20dB-A.Ultra lightweight (85g/3oz). Please refer the Quick Start Guide before use. Power Required: Plug-in power required (330uA @ 2.5V)

Product description

Rode Microphones VideoMicro Compact On-Camera Microphone

User questions & answers

Question:	Is this cabe working with Iphone XR
Answer:	It works with xs max so I guess no problem at all. Its rode don’t worry man. But you need put wires correctly!! Just try and mark it with a color tape.
Question:	is this water proof
Answer:	Hi there. This microphone is not waterproof.
Question:	will this work for an Iphone 5s
Answer:	You need a different connection cable that goes into the headphone jack. The one that comes with it is only for cameras
Question:	Which cable do I need for the iPhone X
Answer:	you will need a TRS to TRRS cable in order to use this mic on iphone x

Product description

The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight, and when mounting on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its super-cardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.

The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.

An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt battery (sold separately). The microphone will run for approximately 100 hours on a single battery.

In the box:

- Rode Videomic Shotgun microphone with Rycote Lyre Suspension

- Black music stand with tripod base and boom arm (comes separately, extends from 3'1" to 7'2" when used together)

- Music stand to 3/8" adapter

- 1/8" stereo 25' extension cable

• Full Studio: Great kit for small-studio recording for school projects, YouTube, interviews, music videos and more
• Improve Audio Quality: Videomic improves the audio quality over the camera's on-board microphone
• Height Extendable: Stand extends to over 5' in height; use together with boom for more than 7' in height for studio overhead booming
• Easy Setup: 25' cable allows Videomic to easily connect directly to a camera
• Includes: Videomic, adjustable stand, stand adapter, and 25' extension cable

User questions & answers

Question:	What cable is in this kit
Answer:	It’s a 25 foot female to male 3.5mm (stereo/headphone) cable. It’s basically to run an extension from the build in Rode mic 3.5mm cable to the camera when using the boom mic stand (up to 25 feet away, respectively).
Question:	is there a way i can get just the boomploe
Answer:	Yeah I was able to find a mic boom here is one https://www.amazon.com/Ohuhu%C2%AE-Microphone-Stand-Collapsible-Tripod/dp/B00OZ9C9LK/ref=sr_1_11?ie=UTF8&qid=1473906179&sr=8-11&keywords=mic+boom+stand
Question:	Does this perform well outdoors
Answer:	Yes it does. I've used it quite a lot outside on top of my camera. As long g it's pretty near the subject of course
Question:	Can this microphone be plugged directly into your MacBook air without compromising audio quality, or is an audio (microphone) jack required
Answer:	A audio Microphone Jack is needed + if your looking into using it for a macbook you mic as well pick something that makes sense and more affordable that still offers good great audio like the Blue Yetti Mic or Blue snowball

Product description

Wireless GO is an ultra-compact transmitter/receiver combo digital wireless microphone system which is unique in its clip’n’go versatility, incredibly compact form-factor, and unmatched price accessibility. It’s the perfect wireless mic solution for content creators in all disciplines: filmmakers, on-camera presenters, news-gatherers, vloggers and more.

The Transmitter (TX)

Measuring in at an ultra-compact 44 x 45.3 x 18.5mm and weighing just 31g, the Wireless GO transmitter (TX) acts as either a quick and easy clip-on wireless microphone, thanks to a high-quality built-in omnidirectional condenser capsule, or as the world’s smallest beltpack transmitter for a lavalier microphone via the 3.5mm TRS input. The Wireless GO’s quick clip-on capabilities make it perfect for run-and-gun journalists and vloggers in the field: never miss the action as it happens.

The Receiver (RX)

The RX is just as compact, measuring only 44 x 46.4 x 18.5mm and weighing only 31g, which makes your rig that much easier to carry and facilitates mounting on a range of camera gimbals and stabilizers. Its dual-purpose mount sits snug in your camera’s shoe mount, or clips easily onto your camera strap or an item of clothing. The supplied 3.5mm TRS output cable plugs into your camera’s audio input or, with the relevant available RODE adapters, into your recorder, GoPro, iPhone etc.

Bundle Includes:

• Rode Wireless GO Compact Transmitter/Receiver Wireless Microphone System for Voice Recording
• Knox Gear Clip-On Lavalier Microphone

• BUNDLE INCLUDES: Rode Wireless GO Compact Transmitter/Receiver Wireless Microphone System for Voice Recording and Knox Gear Clip-On Lavalier Microphone
• COMBO: Clip-on microphone or beltpack transmitter for lavalier/headset mic / Built-in omnidirectional condenser mic for broadcast-quality sound
• AUDIO: Delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation
• POWER: TX and RX have built-in USB-C rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode
• ADVANCED: The transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location

User questions & answers

Question:	Does it work with Android phone (specifically google pixel). What cable do i need to connect to pixel 2 and 3. Pixel 2 does not have audio jack
Answer:	yes
Question:	Does it come with the fur windshield
Answer:	Although it "could" be used in your trailer, I wouldn't recommend it. These batteries are starter batteries and do not have a lot of capacity. You also need to make sure that the charging system is safe for a lithium battery. Please feel free to contact us to discuss this further (484)652-8010 Thank you, Billet Proof Designs
Question:	Will this work with other Smartphones besides Apple products
Answer:	I have started to have the same issue. Don't know the answer.
Question:	Does this come with the charger
Answer:	Contrary to what the first answer said, you can charge this battery from 12V. I have the adapter to charge it from a car and it works well. The 110V charger that comes with the battery outputs 13.5V at 6.5A. That's 90W. It charges the battery in about 4 hours. If you can get a solar panel or panels that would output 13.5V, it should work. But the less amperage you have available, the longer it will take to charge the battery. Disclaimer: I haven't tried to do this. YMMV And, BTW, the battery I have has worked well for me.

• UNIVERSAL COMPATIBILITY: Just switch"Camera" or"Phone" on the microphone body. Universal for iPhone, Androids, Cameras, Camcorders, Audio Recorders etc. (the devices should have a 3.5mm mic jack) Video Mic for filming YouTube Vlogs, interviews etc.
• BATTERY-FREE DESIGN: Powered by camera/smartphone plug-in power which can minimize handling noise and help you solve the problem of insufficient battery power for long time recording.
• UNIQUE SHOCK MOUNT DESIGN: Features a shock-absorption shock mount, effective at minimizing unwanted vibrational, handling noise.
• SUPER-CARDIOID MICROPHONE: CVM-V30 LITE shotgun microphone is giving excellent off-axis rejection for desired sounds, which can effectively reduce the noise of the surrounding environment to be picked up.
• CONFIDENCE TO BUY: Our products are designed to ease your technical woes, not add to them. If you encounter any issues, please contact us. (Contact the seller or Ask a question). We will try our best to help you solve it until you are satisfied.

User questions & answers

Question:	Does this work with a Sony slt-a65v
Answer:	Hello, YES. Please note that the mic support device comes with a 3.5mm audio input jack. If your device haven't a 3.5mm audio jack, use the correct adapter cable as the connector. VC Mall
Question:	I have a Canon t6 will this microphone work on my camera
Answer:	Hello, Yes. But you need to prepare an extra adapter cable yourself, because our microphone comes with 3.5mm audio jack. VC Mall
Question:	Even in a silent room, I hear a ton of background noise when trying to film with the mic and my smartphone. Are there any suggestions to correct this
Answer:	Thanks for your question. To avoid interference, please try to turn off WIFI on your phone, the best state is in airplane mode. For iPhone 7 and above IOS smartphone, please connect your ORIGINAL Lightning -3.5mm TRRS cable. Using third-party lightning cable may be incompatible or affect the sound quality. VC Mall
Question:	Will it work with Pentax K
Answer:	I cannot verify , if the pentax k7 has a 3.5 mm jack, it should work. Maybe verify if the camera works with another 4.5 mm audio mic and if so then this should work. So many cameras, hopefully someone has run into this. Livelifeloud Cheers and Cheeks Out 🛒🕺🏻🇨🇦

Product features

We are always at here to help you if you have any questions!

Comica CVM-V30 LITE Microphone

Things you need to pay attention to!

• When used with the Android system, the Mic works well in Audio; If it does not work in video mode, we recommend that you use it with a third-party video app.
• For Canon T5 T6 T7 devices, you need to purchase an adapter cable to use.
• Please make sure your device has a 3.5mm jack before buying.
• In order to avoid any interference, we suggest that you can turn off the WIFI of your phone, and the best condition is in flight mode.