10 best neewer interval timers

Product description

Description:

Compatible With:

Nikon:D2H, D2Hs, D1x, D1h, D1, D2x, D2Xs, D200, D300, D3, D3X, D3S, D2HS, D300S, D700,D800,F5, F6, F100, F90, F90x

Kodak: DCS-14n

Fujifilm: Finepix S3pro, S5pro

Specifications:

Timer delay: 0s to 99hrs 59min 59s in 1s increments

Exposure time: 0s to 99hrs 59min 59s in 1s increments

Interval: 0s to 99hrs 59min 59s in 1s increments

Number of shots: 1 to 399

Power source: Two AAA-type batteries

Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56 s, and an interval of 5 min.

Approx Weight: 90g (without batteries)

Length of Cord: 90cm

Approx Size: 155 x 40 x 18 mm

Delay / Self Timer (DELAY): Just like the self timer on your camera. The TM timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds.

BULB/Long Exposure (LONG): It allows you to take time exposures up to 100 hours in length.

Interval Timer (INTVL): The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.

Exposure Count (N): This setting permits you to set the number of exposures that will be taken, up to a total 399.

Package Contents:

1 x Digital Timer Remote for Nikon

1 x Manual

• The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure count control, Remote switch function.
• Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second increments，Shooting amount:1to 399 and unlimited，speaker on/off.
• The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter.
• The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the screen operation.
• Compatible with Nikon D850/D810/D800/D800E/D700/D500/D300S/D300/D200/D100/D5/D4/D3/D2/D1/F5/F6/F90/F90X/F100/N90s DSLR Cameraswtih Fujifilm S5Pro/S3Pro/S1Pro/R2Pro with Kodak DSC-14N

User questions & answers

Question:	Will This work woth D
Answer:	http://www.amazon.com/Neewer-Viltrox-Intervalometer-Control-Shutter/dp/B00VUE0TA6/ref=sr_1_13?ie=UTF8&qid=1436381454&sr=8-13&keywords=D5100+Neewer+Remote
Question:	Does it work with D
Answer:	No. The D600 doesn't have the remote terminal port that is necessary for this controller.
Question:	Will this work with a Nikon D100? I assume so but prefer knowing for sure before I order
Answer:	I dont think so as nikon d100 does not have the plug for the connecting pin on the timer. Also i would advise to buy nikon original remote. I purchased this remote and did not work with my nikon d300s and i had to return it.... Hope this helps
Question:	If I have a hotshoe to PC port adapter will this work with my D
Answer:	Don't believe it will...it has to plug into the 10 pin propietary plug that some of the Nikon cameras have. My old D70 doesn't have it but my new D800 does.

Product description

The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can be illuminated. The remote has a stylish and ergonomic design. This timer remote cord allows the camera shutter to be released from a distance and prevents the camera from shaking

*Two-stage release button: Halfway pressing for auto-focus, complete pressing for taking pictures.

*Power source: Two AAA-type batteries (2XAAA Batteries not included)

*Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56 s, and an interval of 5 min.

Compatible with:

Canon (Replacement for RS-60E3) EOS Digital Rebel

Digital Rebel (aka 300D)

Rebel T1i (aka 500D)

Rebel XT (aka 350D)

Rebel XTi (aka 400D

Rebel XS (aka 1000D & Kiss F)

Rebel XSi (aka 450D & Kiss X2)

EOS Kiss/New Kiss/Kiss 7/Kiss III

Rebel 2000, Rebel G, Rebel G II, Rebel T1, Rebel T2, Rebel T2i

ELAN 7, ELAN 7E, ELAN 7N, ELAN II, ELAN IIE, IX LITE

PowerShot G10/G11

Pentax (Replacement for CS-205) K10D/K110D/K100D/K20D/K200D/KM

*ist D/DS/DS2/DL/DL2/K10

MZ-6, MZ-L, ZX-L

Hasselblad: H/H1/H2/H2D/H1D

Contax: 645/Nl/Nx/N/N Digital/LA-50

Samsung: GX-20 GX-10 GX-1L GX-1

Specifications:

*Model: RS-60E3 Timer Remote Control Cord

*Length of cord: 91 cm (3 ft. approx.)

*Shutter release button: Dual Stage Button (halfway / complete)

Functions:

*Delay / Self Timer (DELAY)

*BULB/Long Exposure (LONG)

*Interval Timer (INTVL)

*Exposure Count (N)

• The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure count control, Remote switch function.
• Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second increments，Shooting amount:1to 399 and unlimited，speaker on/off.
• The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter.
• The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the screen operation.
• Compatible with Canon EOS Canon 760D(T6s)/750D(T6i)/700D(T5i)/1300D(T6)/1100D(T3)/1000D(XS)/650D (T4i)/600D(T3i)/550D(T2i)/500D(T1i)/450D(XSi)/400D(XTi)/350D (XT)/300D/100D/80D/70D/60D/60Da/300/50/30/33/G10/G11/XD/X2,with Pentax K7/K5/K10D/K20D/K200D/K100D/K100DL/IstD/IstDL/Ist//MZ-6/ZX-L/MZ-L/K2000D/645D, Samsung GX-1L/GX- 1S/GX-10/GX-20/NX10/NX100,Contax 645/N1/NX/N

User questions & answers

Question:	Does it work with the Canon EOS 550D, and does it make time lapse pictures
Answer:	I speak Spanish but respond with google translator, so there may be words that are not in complete harmony. Is correct Neewer ® Timer Remote Control RS-60E3 For Canon, EOS 550D operated and also has the function of taking photos with time intervals, although this function have not used it yet. But for photos that require long exposure times or brief is perfect and works for it even without batteries.
Question:	does it work for eos 7D
Answer:	The model that I received will not work with the 7D or the 5D Mk III. The connector would require an adapter. If you want one with the correct connector then get this: http://www.amazon.com/dp/B003F69JBW/
Question:	Does it work with the T6I
Answer:	Yes.
Question:	Does it work with Canon 60D and 70D
Answer:	I don't own a 60D or a 70D I have a t3i and it works great on that. My dad has the Canon 7D and he has the same timer shutter and it works fine for him. So I am guessing it would work

Product features

Neewer Timer Shutter Release Remote Control

• This timer remote cord allows the camera shutter to be released from a distance and prevents the camera from shaking.
• The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb.
• Power source: Two AAA-type batteries (Batteries not included)

Product description

Specifications:

Approx Size: 150 X 38 X 15 mm

Power source: Two AAA-type batteries

Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56 s, and an interval of 5 min.

Weight: 90g (without batteries)

Length of Cord: 90cm

Function:

Delay / Self Timer (DELAY)

Just like the self timer on your camera. The TM timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds.

BULB/Long Exposure (LONG)

It allows you to take time exposures up to 100 hours in length.

Interval Timer (INTVL)

The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.

Exposure Count (N)

This setting permits you to set the number of exposures that will be taken, up to a total 399.

Compatible With:

Canon EOS Digital SLR

EOS 1D, 1D Mark II, 1D Mark II N, 1D Mark III

EOS 1Ds, 1Ds Mark II, 1Ds Mark III

EOS 5D , 5D Mark III , Mark II

EOS 10D 20D 30D 40D 50D D30 D2000

Canon EOS Film SLR

EOS 1V 1VHS 3

package content:

1x Digital Timer Remote

1x User manual

• The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure count control, Remote switch function.
• Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second increments，Shooting amount:1to 399 and unlimited，speaker on/off.
• The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter.
• The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the screen operation.
• Compatible with: Canon 7D Mark II，6D Mark II，5D Mark II/III/IV，50D，40D，30D，20D，10D，7D，6D，5DS ，5DSR，1D，1D Mark II/III/IV，1DS，1DS Mark II/III，1V，3，D30 DSLR Cameras

User questions & answers

Question:	will this work for a canon T6i (750D
Answer:	No, how do you like this one?https://www.amazon.com/Neewer-Shutter-Release-Remote-Control/dp/B003Q9RERY/ref=cm_cd_al_qh_dp_t#Ask
Question:	does i twork with cannon 7D
Answer:	Yes it will. The 7d has a 3 prong slot so this will work great.
Question:	Does this work with the canon 6D
Answer:	Hi Anna, yes it works fine with my 6D. Regards, Stefan
Question:
Answer:	Yes. The 6d has the same three pin connection.

Product description

Description:

With a built in interval timer, the new premium electronic timer remote cord will help you for exact controlling exposure time. Moreover, compare with original products, new premium electronic timer remote cord can achieve all the function as original but with lower cost.

This multi-function remote cord provides an automatic timer function, you can choose the delay (time before shooting starts ),exposure time, interval, and number of shots for timed interval photography. Shutter speed can be selected with the camera if desired. It also has a manual release. Take photographs manually using the shutter-release button on the remote cord. Photographs can be taken manually even when the timer is running.

The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can also be illuminated. The remote has a stylish and ergonomic design, making it a pleasure to use. It has a super large LCD screen. The shutter release button on the remote is a two-stage button: half-pressing the button will cause the camera to focus, and full-pressing will trigger the camera's shutter.



Package Contents:

1 x Timer Remote Control for NIKON D90 D5000 D5200 D7100 D4

1 x English manual

• The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure count control, Remote switch function.
• Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second increments，Shooting amount:1to 399 and unlimited，speaker on/off.
• The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter.
• The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the screen operation.
• Compatible with:Nikon D750/D780/D7500/D7200/D7100/D7000/D5600/D5500/D5300/D5200/D5100/D5000/D3300/D3200/D3100/D610/D600/D90 DSLR Cameras

User questions & answers

Question:	does this works with d
Answer:	It can be added to almost any tripod as it has the required tripod thread, BUT on the website I saw some comments that you need to be careful how you remove the clip connector (designed to place camera over a monitor) . Apparently it could break, which shouldn't stop you using the camera on the tripod, but you will not be able to reattach for use above a monitor. The weight is no issue for this tripod, even if using the horizontal arm.
Question:	Does it work with the Nikon D
Answer:	Yes, I use it with my Canon 6D and Tamron 24-70mm. It’s an amazing tripod.
Question:	I shoot with a nikon d5300. is this compatible with it? thank you
Answer:	Yes
Question:	Will this work with the Nikon
Answer:	This is a lighter duty head, most I put on it is a 100-400mm.

Product description

Description:

This digital timer remote is designed to trigger a camera shutter with regular time intervals, featuring self-timer, interval timer, long-exposure timer, and exposure-count settings. This timer is suitable for a wide variety of tasks, including astronomical photography.

Features:

Main functions: Delay / Self Timer (DELAY), BULB/Long Exposure(LONG), Interval Timer(INTVL), Exposure Count (N).

Full functions supported as the camera shutter switch (with halfway or complete pressing)

The shutter release button on the remote is a two-stage button: half-pressing the button will cause the camera to focus, and full-pressing will trigger the camera's shutter.

Functions as a timer remote and can be programmed to function as an interval met.

Design for group, macro, long exposures, continuous, motion shooting, etc.

Energy saving design, can be use for long time.

Lighting / Lock button is designed for night use.

Specifications:

Compatibility: Sony A7 A6000

Timer delay: 0s to 99hrs 59min 59s in 1s increments

Exposure time: 0s to 99hrs 59min 59s in 1s increments

Interval: 0s to 99hrs 59min 59s in 1s increments

Length of cord: Approx. 35.4"/90cm

Power supply: Two AAA-type batteries (battery not included)

Package Contents:

1x Digital Timer Remote Control

Note: Camera not included.

• Main functions: Self-timer, interval timer, long exposure timer, exposure count control, remote switch function.
• The remote switch function can be achieved without battery power supply.
• The remote cord is portable and durable for outdoor shooting.
• The shooting, timer shoot and time exposure are operable easily at night or in dark environment with the backlight equipped LCD screen.
• The exposure count function can set easily.

User questions & answers

Question:	How would or could this work while doing bulb - extended time lapse, sony a6500, sony rx10, etc
Answer:	I used a Sony RX10 with this Neewer device to do a time lapse sequence to document the process of an eagle-scout project, which was then made into an .MP4 video. In this case the time lapse between pictures was 30 seconds, with most pictures being shown for 3 seconds in the video.
Question:	Is this compatible with a Nikon P
Answer:	It is not compatible with a Nikon P900.
Question:	Would this work for the nikon d3400 it does not have the standard intervalometer connector only a micro usb and hdmi ports
Answer:	No, it doesn't work on the Nikon D3400. While both this remote and the camera use micro-USB connector, it won't work. The remote's connector won't insert fully into the camera's slot and no signal is transmitted.
Question:	Does the simple shutter release function even without batteries? I have an Aperture shutter release for Oly that only needs battery for the timer
Answer:	I took the batteries out and gave it a try with my canon 60D. It does work as a shutter release with no batteries. I tried it with the shutter lock down on BULB for a longer exposure and it also worked.

Product description

Note: Only at night or in dim light, is the LCD screen backlight obvious



Note: Camera, Tripods and Battery are NOT included



Features:

This shutter release timer remote control comes with 6 Connect Plug( 01 02 04 06 08 09/Multi) which could support more mainstream camera models to use

01 for Canon 700D/T5i 650D/T4i 550D/T2i 60D; 02 for Canon 5D MarkIII 6D 70D 7D MarkII; 04 for Nikon D4 D3S D3X D810 D300s D700 D800; 06 for D90 D7100 D600 D5300 D610 D5100 D3200 D3100; 08 for Olympus EM10II EM5 1 EP5 EPL5 E-PL6; 09/Multi for Sony A7 A7S A7R A5000 A5100 A6000 Cameras

Timer function to free you from tedious operation

Easy to read backlit LCD display

Note: Shutter Release Timer Remote Control could use as a normal shutter control when without battery. But the timing function can NOT work when without the battery in it(Batteries NOT include)



Specifications:

Power source: Two AAA-type batteries (2XAAA Batteries not included)

Length of cord: 120 cm (3.9 ft. approx.)



Compatible:

01 for Canon 700D/T5i 650D/T4i 550D/T2i 60D Cameras

02 for Canon 5D MarkIII 6D 70D 7D MarkII Cameras

04 for Nikon D4 D3S D3X D810 D300s D700 D800 Cameras

06 for D90 D7100 D600 D5300 D610 D5100 D3200 D3100 Cameras

08 for Olympus EM10II EM5 1 EP5 EPL5 E-PL6 Cameras

09/Multi for Sony A7 A7S A7R A5000 A5100 A6000 Cameras



Package Contents:

1 * Digital Timer Remote

6 * Connect Plug

• This shutter release timer remote control comes with 6 Connect Plug( 01 02 04 06 08 09/Multi) which could support more mainstream camera models to use
• 01 for Canon 700D/T5i 650D/T4i 550D/T2i 60D; 02 for Canon 5D MarkIII 6D 70D 7D MarkII; 04 for Nikon D4 D3S D3X D810 D300s D700 D800; 06 for D90 D7100 D600 D5300 D610 D5100 D3200 D3100; 08 for Olympus EM10II EM5 1 EP5 EPL5 E-PL6; 09/Multi for Sony A7 A7S A7R A5000 A5100 A6000 Cameras
• Timer function to free you from tedious operation
• Easy to read backlit LCD display
• Note: Shutter Release Timer Remote Control could use as a normal shutter control when without battery. But the timing function can NOT work when without the battery in it(Batteries NOT include)

User questions & answers

Question:	I have two nikon dslr's, a d7000 and a d810. will this device work on a d7000 and if not, is there a model that will work on both cameras
Answer:	I use mi e with a D-800 and D-810. The device c9.es with a number of adapters. As lo g as there is an adapter for your D-7000, it will work.BTW, this is a great timer/intervalomiter for the price.
Question:	Will it work with a sony a7 iii
Answer:	Change the tip for the sony and it should work. It works with my A7sii and A7Rii
Question:	Are the attachments sold individually? I bought one for my canon but I would like to use it on my Sony as well
Answer:	There are a few free ones for most of the top modes for each major camera brand but Not sure if they sell individually if you lose then or something. you can buy other brands I guess. 2.5mm or so
Question:	Although it's vaguely mentioned , I just want to double-check whether it works with Sony a7ii model specifically
Answer:	It does

Product description

* Long exposure (Bulb) mode allows up to exposure time of 100 hours

* Power supply: 2 x AAA size battery (not included)

* dimentions: 22x9.5x2.5cm



Suitable for:

Canon EOS 550D(Rebel T2i), 450D(Ditital Rebel XSi), 400D(Ditital Rebel XTi), 350D(Dital Rebel XT), 300D/60D/600D/500D/1100D/1000D

EOS 1D, 1D Mark II, 1D Mark II N, 1D Mark III

EOS 1Ds, 1Ds Mark II, 1Ds Mark III

EOS 5D, 5D Mark II

EOS 10D, 20D, 30D, 40D, 50D

Canon EOS Film SLR EOS 1V 1VHS 3

Package Contents:

Timer remote control with cord

Adapter cord with plug

User questions & answers

Question:	Hey guys, will this work with Canon 80D
Answer:	It works with Canon 80D, please feel free to buy.
Question:	Will this work with my "Canon T3" (not the t3i but the t
Answer:	It should work because this Shutter Release Timer Remote replaces the Canon RS-60E3 Remote Switch. You'll use the the small pin connector (the one with both gold ends) that comes with it. On the left side of the camera, open the rubber door to expose 3 terminals, and then plug the pin in the top hole.
Question:	hello friends this control serves for ESO REBEL T
Answer:	Yes
Question:	Anyone used this on a Canon 70D
Answer:	Just got this for my 70D works great!

Product features

Neewer Shutter Release Timer Remote Control

• There is a 4-way directional pad in the middle with a SET button in the center: Use the left and right buttons to toggle the mode between DELAY (how long the unit waits to fire the shutter), LONG (how long a long, or bulb, exposure will last), INTVL (the time between "time lapse" shots, minimum is 00:00'01") and N (number of shots the unit will take before stopping. "- -" is infinite shots, 1 is normal).
• The musical symbol allows you to toggle the beeps on and off.

• ★ PROFESSIONAL-GRADE DISPLAY ★ - The Synergee Premium Interval Wall Timer presents a crystal-clear LED and high contrast display. This professional-grade workout timer is perfect for your home or commercial gym. The bright red and blue numbers are easy to see from all corners of your workout space. The ticking numbers are awesome for timing rounds, rest, or for making you haul @$$ to beat your time cap!
• ★ PREPROGRAMMED & CUSTOMIZABLE ★ – This timer comes preprogrammed with the most utilized timer settings: 10 and 20 minute Tabata; 10 or 20 min EMOM; and Count up/Down. We know from our experience as gym owners and trainers which functions are necessary for you! Every function is totally customizable to time the exact rounds, minutes, and seconds your training requires.
• ★ EXCLUSIVE EMOM FEATURE ★ – “Every Minute On the Minute” or EMOM routines are perfect for getting your heart rate up, scheduling rest, and skill practice. Our timer will beep at second 57, 58, 59 and then hold a long beep on every minute to clearly notify you when the next round begins. You can customize the duration of your EMOM or use the preprogrammed 10 or 20-minute EMOM.
• ★ WHAT’S IN THE PACKAGE ★ – The Large Synergee Premium Interval Timer is 29” x 2" x 6”. Each Timer comes with one remote (batteries not included) with a 60 ft range; an easy-to-read instruction manual is available on the manufacturer website. The volume can be set at 100, 105 or 110 decibels. Manual available on manufacturer's website.
• ★ NO SWEAT GUARANTEE ★ – Leave the sweating and swearing for your training! Buying from Synergee means quick, hassle-free, and caring customer service! Plus, we offer a better-than-money-back guarantee: if there is an issue with your product for any reason, we will send you a new one quickly and absolutely FREE! 100% Customer Satisfaction is our Number 1 Goal!

User questions & answers

Question:	Remote stopped working after a couple of months. How can I get/order a replacement
Answer:	can,But you have to try to hang it in a relatively dry place
Question:	Can this be used as a clock as well? I am looking for a big digital display clock for my gym but can't find one
Answer:	Yes. It has a couple times preset, but also the ability to program settings of your choice. You choose the time/rest/rounds. The Tabata is preset, but thats 20 sec/10 sec rest.
Question:	Are seconds shown when in clock mode? Or just hours and minutes
Answer:	If you ordered this timer from us pellor, we can offer you free remote, please contact us.
Question:	Is the clock autonomous or do you have to manually set it every time it is unplugged
Answer:	Yes, we have, just tell us your order id or directly contact seller, our aftersales service team will offer you a free remote control after getting your message.

Product features

EMOM

An Every Minute On The Minute (EMOTM) routine is perfect for honing in on skills and pacing while getting a great sweat! Our timer will beep at 57, 58, 59 and then hold a long beep on every minute to clearly notify the athlete(s) the next round is starting. Choose from pre-programmed 10 or 20-minute EMOTM, or customize it to the length you need.

COUNT UP / COUNT DOWN

After setting a time, you can choose to count up or down. Perfect for AMRAPS and time caps. Use the ticking seconds to motivate you to move faster or catch another rep, or time your rest between big lifts – every second counts!

TABATA

Tabatas are sneaky! 20 seconds on, 10 seconds off… sounds easy, right? Choose a move, hit our Tabata button, and give it a whirl. You’ll be feeling the burn in no time! Using this feature, you can set customized work-to-rest ratios to meet your training needs.

STOPWATCH

The stopwatch function allows athletes to time their workouts right to the millisecond. Keep track of your personal records and monitor your progress, knowing exactly how long you take each round.

CLOCK

When the clock is not being used for a workout, it functions as a 24/12 hour clock.

STARTING IN 10

Our 10 second countdown gives you enough time to press start and get into position without missing a precious second. Great for coaches running classes and getting athletes ready for their WOD. A Blue Light indicates when the 10 Second Timer mode is on so there are no surprises when you press start!

Product description

Description:



The Studio Strobe Flash is a Bowens Mount 1/8000s High Speed Sync Outdoor Flash, with TTL/M/Multi Flash Mode, High GN68, which can meet flexible Battery Cordless Location shooting demands whether shoot in bright sunshine with wide open aperture, shoot fast-moving events or shoot in scene where ambient light varies.



Specification:



Flash Mode: TTL/M/Multi



Sync Mode: HSS (up to 1/8000s), First Curtain Sync, Second Curtain Sync



Guide Number: GN68 (2m, ISO 100)



Power Output (Max.): 400W



Power Output Range: 7 f-stop range (8 f-stop points) from full to 1/128 (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128)



Stroboscopic Flash: Provided (up to 20 times, 30Hz)



Recycling Time: Approx. 0.01-2.8s



Full Power Flashes: 500 shots



Flash Duration: 1/650s-1/10000s



Successive Flashes: 1 shot, 2 shots, 3 shots, 4 shots...20 shots



Color Temperature: 5600+/-200k



2.4G Wireless: 8 Channels (1-8); 3 Groups (A,B,C) Transmission Range(approx.): 2.4G, 80m



Modeling Lamp: Dimmable LED 13W, 1370 Lumen (Energy Saving)



Flash Tube: ""Plug-in"" tube (user replaceable)



Flash Light Dimension: 120mm(diameter) x 200mm (length)



Flash Light Weight: 1.8 kilograms/3.96 Pounds (Include the battery)



Battery Capacity: 6000mAH, 12V



Charging Voltage: AC 110-130V



Flash Light Protection Function: Overheat/Overvoltage/Overcurrent/Flash Charging protection, Rapid Solidification



Wireless Trigger:



Power Supply: Two AA Alkaline Battery or Ni-MH Battery(Not Included)



With Flash exposure Compensation Function



Package Contents:



1 x Neewer Vision5 Studio Flash



1 x Lithium Battery(Included in the flash)



1 x LED modeling Lamp(Included in the flash)



1 x 110-130V AC Charger



1 x Standard Reflector



1 x Protective Cover



1 x 4-meter 3.5mm Sync Cord



1 x Wireless Trigger(Battery Not Included)

• Compatible with 450D/700D/750D/7D/5D2/5D3/6D/7D2/1D3/1D4/5D4/5DS/1DX/700D/70D Camera; Built-in 2.4G Receiver with 8 Channels. Trigger included.USB firmware upgrade helps keep pace with the latest technology. 1-Year Neewer Warranty and lifetime email support
• Large capacity lithium battery pack to provide 500 full power flashes and fast recycle time (0.01-2.8 seconds)
• 400W Full Power even at 1/8000s High Speed Sync Mode. 13W Dimmable energy-saving LED Modeling bulb. Stable color temperature at 5600+/-200K over the entire power range
• With Li-ion Battery, TTL function, High GN68, High Speed Sync, this Germany Engineered flash meets all Location Shooting demands whether shoot fast-moving objects or shoot in different lighting environments
• Extremely short flash duration: from 1/650 to 1/10000 seconds. 7 steps of power adjustment (1/128 to 1/1)

User questions & answers

Question:	Will this work with Eos R
Answer:	I'm not sure, but I dont think Canon changed the flash system onthe R. It is compatible withe 600 RT flash which I am pretty sure works on the "R" as Canon has not put oyt any notice requiring new Flash for the R. I think thr major change for the "R" is the lens to image sensor distance is reduced w/o need for space for mirror causing a need for different lenses.
Question:	Anyone know where to find the receiver for the transmitter? (VC-818rx
Answer:	What receiver you looking for ? The receiver for this strobe is built into the strobe itself.
Question:	I need to replace the led as it suffered an accident. Where can I get the spare
Answer:	VISICIO Website makes this unit, Neewer re-sales it under their brand and they put little to nothing helpful in their website, the good news is that you can find everything for this particular model (under different name) in VISICIO.com from the drivers to the spear part.
Question:	Will this work for family portraits at the park? and how many feet can it reach to
Answer:	At a Guide Number 60, measured at 6 ft and ISO 100 (as stated for another model), then theoretically this will reach 60/6= f/10 at 6 feet. So about f/4-5.6 for 12 ft, at ISO 100, remember. So at ISO 200 the distance doubles for any given f/stop. (24 ft @ f 4.5 @ ISO 200) and so on. Sounds like pretty good coverage to me. Note: Standard Guide Numbers used to be measured at 10 ft @ 100 ISO so the math for 6 ft is a little different.

Product features

Neewer Vision5 400W TTL for Canon HSS Outdoor Studio Flash Strobe with 2.4G System and Wireless Trigger

Compatible with Canon 450D/700D/750D/5D2/5D3/5D4/5DS/6D/6D2/600D/7D/7D2/70D/80D/800D/1D3/1D4/1DX Camera;

• Perfect for shooting fast-moving events or shoot in scene where ambient light varies, making photography with more flexibility, freedom and efficiency
• With Li-ion Battery, TTL function, High GN68, High Speed Sync, this Germany Engineered flash meets all Location Shooting demands whether shoot fast-moving objects or shoot in different lighting environments Follow the fast pace and every movements of you hot dance;

German Engineered Flash:

• Power Output Range: 7 f-stop range (8 f-stop points) from full to 1/128; Flash Duration: 1/650s-1/10000s
• Recycling Time: 0.01-2.8s; Full Power Flashes: 500 shots
• Successive Flashes: 1 shot, 2 shots, 3 shots, 4 shots...20 shots
• Modeling Lamp: Dimmable LED 13W, 1370 Lumen (Energy Saving)

Replicable Built-in Lithium Battery:

• A Wireless and Stroboscopic studio flash with self-contained battery in the flash head.
• Can provide 500 full power flashes and fast recycle time (0.01-2.8 seconds);
• Especially ideal for location shooting where AC power is not available.
• Battery Capacity: 6000mAh, 12V
• Flash Light Weight: 1.8 kilograms/3.96 Pounds (Include the battery)

2.4 G Wireless System:

• 8 Channels (1-8); 3 Groups (A,B,C)
• Power Supply: Two AA Alkaline Battery or Ni-MH Battery(Not Included)
• With Flash exposure Compensation Function
• Transmission Range(approx.): 2.4G, 80m
• Modeling Lamp: Dimmable LED 13W, 1370 Lumen (Energy Saving)
• Flash Light Protection Function: Overheat/Overvoltage/Overcurrent/Flash Charging protection, Rapid Solidificatio

1/8000s High Speed Sync Outdoor Flash:

• Sync Mode: HSS (up to 1/8000s), First Curtain Sync, Second Curtain Sync
• Flash Mode: TTL/M/Multi
• Guide Number: GN68 (2m, ISO 100)
• Power Output (Max.): 400W
• Color Temperature: 5600+/-200k Power Output Range: 7 f-stop range (8 f-stop points) from full to 1/128 (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128)

Product description

Note: Camera and Battery are not include.

Product Description:

This battery grip/holder is compatible with Canon EOS 750D/760D Rebel T6i/T6s DSLR cameras. The battery grip has a IR remote control,to provide you with a more fitting where the service. It can hold two LP-E17 Li-ion battery packs. With vertical-shotting function, the camera is the best choice for portrait shooting.

Battery Grip:

Pro Battery Grip Replacement for BG-E18 for Canon EOS 750D/760D Rebel T6i/T6s Cameras.

Double endurance.

Two LP-E17 Li-ion batteries can be used.(Battery NOT include)

Double-section shutter, function buttons and dial wheel for easy, quick and multi-functional operation.

Excellent coating made with the top-calss rubber, which can bring you the perfect feeling and no harm to your health.

Battery (not included): 2 x Battery pack LP-E17

Working Voltage: 7.2V-8.4V

Working Temperature: 0- 40°

Dimensions:5.2x2.3x3.1inch/132x77x105mm

Weight: Approx.245g.(without batteries and battery magazine)

Package Contents:

1 x Neewer NW-760D Battery Grip

1 x IR Remote Controller

1 x Instruction Manual

• This battery grip is replacement for BG-E18 with LCD Display Built-in 2.4G Wireless Remote Control for Canon EOS 750D/T6i, 760D/T6s.
• It can hold two LP-E17 lithium-ion battery packs and supports features such as AE lock and FE lock.
• Double-section shutter, function buttons and dial wheel for easy, quick and multi-functional operation
• The timer can set the delay time, exposure time, interval and the number of sheets photo
• 2.4GHz wireless channel which is adopted FSK signal mode can more efficiently guarantee the speed, distance and stability.

User questions & answers

Question:	Will it work with one battery installed
Answer:	yes
Question:	Does anyone know if this grip will fit the new T7i
Answer:	This grip is designed for the T6i and T6s. Each of these cameras are 132mm wide. The T7i is 131mm wide and it’s also 2mm shallower than the bodies this grip is designed for. These differences may result in the grip not fitting properly.
Question:	Whats the difference between the pro and the regular version of this grip
Answer:	The Pro version has a remote control for shutter control, the regular version does not.
Question:	Does the remote also control the telephoto +/- control
Answer:	No, this grip controls the shutter only. Manual release and programmed release.