12 best gopro motorcycle helmets

• ★MOTORCYCLE HELMET CHIN MOUNT for BIKER - Aluminum helmet chin mount,is our own new developed product which updated version of our old plastic helmet mount.This improvement was based on studying feedback and reviews of customers.
• ★LIGHTWEIGHT ALUMINUM HELMET GOPRO MOUNT - It's an all-aluminum helmet mount,Not easy to break, not easy to deform. Stronger and more durable than plastic helmet bracket.This helmet gopro mount is about 62g,just 2g heavier than plastic helmet mount.it is equal to about the weight of an iwatch (including the strap).
• ★MOTORCYCLE HELMET CHIN MOUNT:It's made up of 4 joints and connect by screw.The screw can be adjusted so that you can rotate the joints,every joint can be rotated 180 degree.Each joint can be disassembled and used individually,you can use it with chest straps, headbands, and bicycle supports.We give away a s-adapter to match your camera if there is a threaded hole at the bottom.
• ★ONE-PIECE CURVED BASE MOUNT - Special one-piece curved base mount to fit the helmet better.It can be separated then install on the top of helmet or other smooth curved surface(Such as jet skis, surfboards, snowboards, etc.).Refused cumbersome,one base mount can do it!
• ★SPECIAL ALUMINUM WRENCH & 3M VHB Adhesive Pads - We developed a special aluminum wrench to match this aluminum helmet mount,not only aluminum helmet mount but also other commom screws can be adjusted by it.The original 3M sticky pads provided makes the installation of this helmet mount more secure.

User questions & answers

Question:	Will this fit on a shoei rf1200 despite the helmets curvature
Answer:	Since the two locking S-Biners are not available in the same sizes, the question may well be moot! However, I do use both of these locking S-Biners, in all of the available sizes and can report:1) Both locking systems are secure2) The micro lock is the more positive and obvious system since the central locking "knob" activates both locks and is easily visible when looking ay the device.3) The slide lock is the easier device to remove things from as you can open either side while being assured that the other side is still locked and secure.4) The micro lock is great for keys5) The slide lock is great for keeping larger items secured to your belt.I hope this helps!
Question:	Will this work with the akaso EK
Answer:	Nope, and I think the chair is really high-quality made.
Question:	Would a gopro hero 3 fit on this
Answer:	Yup. It is adjustable like most office chairs and will stay at your intended height.
Question:	Is there a speed limit on this mount? I'm worried it will get ripped off at fast speeds
Answer:	Hello, the maximum weight of this chair is 400 pounds.

Product features

SUREWO Aluminum Helmet Chin Mount

The helmet chin mount series was developed by SUREWO.They are very popular with customers as soon as they are launched.Metal helmet chin mount is a more strong bracket developed based on the plastic version.

The wrench is designed for this aluminum helmet chin mount,not only aluminum helmet mount but also other gopro screws can be adjusted by it.

Product Struture

Made up of 4 aluminum joints and connect by screw,each component can be used separately or used.

Multiple Installation Methods

You can install it on the side or on the chin. Or remove the joints and mount the camera on top of the helmet with the helmet base mount only.

Safety Rope Buckle & Adapter

To ensure the safety of your camera, be sure to use a safety rope buckle.

If your camera has a threaded hole, you can use this adapter to install it.

ONE-PIECE CURVED BASE MOUNT

Integrated aluminum curved base,suitable for a variety of smooth surfaces and flat surfaces.

3M VHB ADHESIVE PADS

The original 3M patch can provide stronger adhesion, so you can rest assured to install the helmet bracket.It’s better to let it stand for 48 hours for better viscosity.

SPECIAL ALUMINUM WRENCH

The design concept of this wrench is to allow customers to adjust the screws of the chin mount more conveniently. The large hollow can be used to adjust the gopro screws and aluminum screws, and the small hollow can be used to adjust the small screws on the helmet mount.

• Hinged wings to conform to various curvatures
• Mounted and secured with heavy duty 3M tape
• Lightweight and strong engineered design
• Ideal fit for Shoei RF series (RF1100, RF1200, etc.) and Bell Qualifier helmets and other curved chin helmets

User questions & answers

Question:	Will this fit on a hjc rpha 70 st helmet
Answer:	First adjust tension per the manual. If still uneven, the wire spring that pushes the pads apart is mounted into a slotted nut. This nut was rotated too far causing one pad on the front wheel to always rub.
Question:	Does anybody know if this would fit an agv veloce gt
Answer:	The stand over height on this bike is about 17.5". Thank you.
Question:	Will this work with the Shoei X- fourteen
Answer:	Not Sure of the exact weight but its around 15-18 lbs
Question:	Will this work with the Bell Star 2016 helmet
Answer:	Yes, the 20" Elm comes with a kickstand. Thanks!

• With this mount, action cameras can be mounted on the chin part of helmet, shooting angle is just like from your own eyes
• Strap and camera mount are all-in-ones, it is easy to install and remove; the camera can be mounted directly without quick-release buckle. Compared to buckle type, life is longer since without frequently disassembling
• Fix the camera to the helmet by silicon strap, easy to install and remove. Compared to the sticky type mount, it is more convenient to adjustand disassembling.
• Compatible with most of action cameras in the market, such as GoPro Hero 9 black, Hero 7, Hero 6, Hero Session, Osmo action, SJcam, and other similar action cameras
• Package includes strap chin mount and screw；it suits for full face motorcycle helmet; Application for motorcycling

User questions & answers

Question:	Will this work with the gopro hero
Answer:	It's compatible with Various Cell Phone Cases but might not work with prefabricated cases, cases without a camera hole or charging hole, or cases with bumpy or unsmooth surfaces. So cute and sleek looking. Way better than the pop socket/ring
Question:	is this compatible with the gopro hero
Answer:	Yes, the phone strap works on wireless & magnetic chargers & car mounts and you can use wireless charging
Question:	Can you still wear goggles with this on the helmet
Answer:	Eco-friendly elastic silicone is nice and stretchy. It's a pain-free grip.

Product features

Motorcycle Helmet Strap Chin Mount for GoPro Hero 8 7 6 5 4 DJI Osmo Action SJCAM Xiaomi Yi 4K Action Cameras

Description:

• With this mount, action cameras can be mounted on the chin part of the helmet; Shooting angle is just like from your own eyes;
• Compared to other helmet mounts which are fixed by sticker, this chin mount is easier to fix, shooting angle is better and more stable. You do not worry that the camera will drop.

Features:

• With a tripod adapter, the camera can be mounted directly without a quick-release buckle and facilitate installation.
• With silicone strap, easy to install and to remove, long life span and stable mounting;
• It suits for full-face motorcycle helmet

Packing list

• strap chin mount*1
• screw *1

• MUST HAVE ACCESSORY - This multi-function helmet mount kit is must-have GoPro accessory to bikers. It includes chin mount and J-Hook mount. So you can set your GoPro in three placements(chin of helmet, side of helmet or top of helmet) to take video when you riding.
• HELMET CHIN MOUNT - The helmet chin mount is with extension arm which can swivel 180º, so you can adjust it to wide range angles, such as forward visibility, backward visibility, and blind area.
• J HOOK MOUNT - You can combine the J-hook mount with a curved mount to use it on the helmet or combine it with a flat mount to use it on ski/skate/surfboards, kayak and so on.
• PACKAGE INCLUDES - 1 PCS Helmet Chin Mount, 1 PCS J-Hook Mount, 10 PCS Stickers, 2 Pairs Flat Mount, 2 Pairs Curved Mount, 1 PCS Wrench, 1 PCS Safety Tether.

User questions & answers

Question:	Will this work with the hero
Answer:	Yes. The SB-700 on up to the SB-910 will work on your Nikon.
Question:	m pads
Answer:	Yes, I have used the SB-700 in studio wirelessly with the D-90... works fabulous ! It will work wirelessly on all Nikon DSLR's.... have tried it with entry level models up to the beastly D800. Hopes this helps...it is a great flash !
Question:	Is this mount made out of aluminum or plastic? Thanks
Answer:	Yes it will work with the D3200. For more info you can visit http://techexperience.net/go/nikon/
Question:	Does it come with a suction cup? I'm looking to do an atv ride tour and i want to attach the go pro on my helmet. What can i use for that
Answer:	This product does indeed come with the diffuser as well as two colored filters. If you look up an unboxing of the product on youtube you'll see exactly what you would be getting.

Product features

GoPro Helmet Mount

This multi-function helmet mount kit is must-have GoPro accessory to bikers. It includes chin mount and J-Hook mount. So you can set your GoPro in three placements(chin of helmet, side of helmet or top of helmet) to take video when you riding.

HELMET MOUNT

The helmet chin mount is with extension arm which can swivel 180º, so you can adjust it to wide range angles, such as forward visibility, backward visibility, and blind area.

J HOOK MOUNT

You can combine the J-hook mount with a curved mount to use it on the helmet or combine it with a flat mount to use it on ski/skate/surfboards, kayak and so on.

SAFETY ROPE BUCKLE

Must install safe rope after installing the helmet mount well, and make sure it is tighten up. It can provide extra security, otherwise the camera has a risk of falling down.

• ★ SUREWO has improved the helmet chin strap. Through design collection and user feedback of the existing chin strap, some improvements have been made to the design. A new double-head adapter has been added to facilitate extended and adjusted shooting angle.
• ★The base mount is integrally formed,it's stable and hard to crack.Soft rubber gasket on the back is designed with non-slip particles.The gasket and the bottom bracket are integrated into one, which is suitable for most cameras.
• ★The middle part of the gasket adopts a sunken design to highlight the soft glue on the periphery to avoid scratching the helmet.
• ★High-quality elastic strap buckle design, abandon the strap design that is difficult to install, and avoid excessive length straps hitting the skin during high-speed riding and causing pain.
• ★Rounded design. Compared with the old style with sharp corners, this style uses rounded corners to avoid possible safety problems. SUREWO, always thinking about your comfort and safety.

User questions & answers

Question:	Will this fit on an LS2 Valiant
Answer:	26 3/4"
Question:	will this mount a GoPro hero session
Answer:	Yes, back support tilt when you lean backwards. besides, the chair has the tile lock, you can lock the back as you like. Merry Christmas and happy new year
Question:	Will the fit a leatt gpx 5.5 v19 or should i get the claw one? thanks
Answer:	Do not know but it will be well worth the wait
Question:	Does this interfere with your shield closing completely
Answer:	It's bonded leather, kind of synthetic leather

Product features

Buckle design,easy to install

The buckle design is easier to install than the strap design.Solved the problem of too long straps hitting helmet and face during riding.

Sunken design

Sinking design, highlighting the outer soft rubber to avoid scratching the helmet.

Round design

The round design replaces the sharp corner design to ensure your riding safety. We always put your safety first.

• ★MOTORCYCLE HELMET CHIN MOUNT:Multi-Function helmet mounts kit,is our own specific product for biker. We are a technology company with a registered brand and protected by U.S. laws. Our products are sold to many countries and regions around the world.
• ★SPECIALIZED HELMET MOUNT:It's made up of 4 joints and connect by screw.The screw can be adjusted so that you can rotate the joints,every joint can be rotated 180 degree.We give away a s-adapter to match your camera if there is a threaded hole at the bottom.
• ★ADHESIVE MOUNTS & STICKY PADS:Adhesive mounts divided into curved and flat mounts,you can use according to circumstances.Industrial strength waterproof sticky pads,help you install your camera on the helmet.NOTE：After the first installation, please let the stand stand for 24 hours before using.
• ★SAFETY ROPE BUCKLE & WRENCH:You can install safety rope after installing the camera,it provides dual protection.The wrench can adjust all the screws except the screw which at the bottom,you need to use your own screwdriver.
• ★SPECIALIZED ACCESSORIES in COMBINATION:The SUREWO motorcycle helmet chin mount and J hook mount included in the product allow you to install the camera to multiple places.Use the motorcycle camera mount to install the camera on the chin or side of helmet.Using the J hook buckle, the camera can be mounted on the top of the helmet.You can also install it on skis/surfboards.It's all up to your own preferences.

User questions & answers

Question:	Will this work with the insta360 x
Answer:	I probably average 4-5 hours a day in the chair and find it comfortable and the most padded office chair I have used.
Question:	Does this affect on the air flow because of the chin vent? If you have one
Answer:	Yes you can return to Kohls
Question:	I just purchased this just the hinges move around is there a way for them to lock in place I have the screws comepletly tight
Answer:	I would contact amazon
Question:	does this fit the session 5 GoPro
Answer:	Dear customer, the weight capacity is 250lb.

Product features

MOTORCYCLE HELMET CHIN MOUNT

Made by four joints and every joint can be adjusted.You can also dismantle this four joints and assemble them into other accessories / use with other accessories.

J HOOK MOUNT

J hook can be installed on the top or front of the helmet,or on other places/accessories,such as ski/surfboard,chest strap/head strap,etc.

SAFETY ROPE BUCKLE

Please make sure to install the safety buckle,it can provide extra protection for your camera.

S-ADAPTER

Fits your camera which has a 1/4 threaded hole.

• DURABLE MATERIAL - made of premium plastic, silicone and woven belt. It can be repeatedly used, offers stable mounting and helps you to capture exciting moment
• STRAP DESIGN - the mount can be fastened on the helmet chin. Tighten or loose the strap by the buckle. Strong enough to hold your camera stably
• J HOOK - No complicated cooperation with installing or removing, a J hook on the base can be connected with various accessories to meet all demands
• SILICONE BASE - With strong extensibility, the base fits the different helmet surface perfectly. The anti-shock and anti-slid design assure you a clear shooting or filmin
• COMPATIBILITY - Suitable for GoPro Hero 9, 8, 7, (2018), 6 5 4 3, Hero Black, Session, Xiaomi Yi, SJCAM . Ideal for motorcycle lovers. NOT suitble for helmets with long chin

User questions & answers

Question:	Has anyone tried this with an rpha 90 helmet? the helmet has a latch on the faceshield and a built in chin curtain
Answer:	The flash will Tilt, and Swivel
Question:	will this work with a hero
Answer:	Yes
Question:	Will this work for modular helmets
Answer:	Hi! This Sony HVL-F32M Premium Compact Flash uses multi-interface shoe for its accessory shoe. On the other hand, your Sony a57 uses auto-lock accessory shoe. You will be needing a shoe adapter to make it work, model #: ADP-AMA (Auto-Lock Shoe Adapter). Hope this helps. -Ely
Question:	does this work with akaso ek7000 action camera
Answer:	Hi AGeoJO, this Sony HVL-F32M do offer HSS (High-speed sync) mode. -Ely

Product features

Feature:

The clip mount is tiny and lightweight. A must choice for travelling Super strong spring offers powerful mechanical energy. Alligator design with steady clipping ability assures your camera capture more exciting moments

Silicone Grip

Made of professional silicone pad. Durable, anti-slip it fit the helmet tightly.

Woven Belt

ABS grip with straps make it easy to shooting without any shaking

Great Compatibility

It is compatible with most of the action cameras like GoPro, Xiaomi, Osmo

Specification

Material: ABS Plastic

Weight: 68 g / 24 oz

Dimension: 10 x 10 x 6 cm/ 3.9 x 3.9 x 2.36in

Best Choice for Motor Racing

Perfect camera angle for POV filming

Note

Only for the helmet with short chin

• Compatible with GoPro Hero 9 8 7 6 5 4 Session 3+ 3 2, Fusion, Xiaomi Yi DJI AKASO Campark Action Cameras
• Made up of 4 joints and connected by screw, every joint can be rotated 180 degree, allows you to place the camera right where it needs to be.You can combine the J-hook mount with a curved mount to use it on the helmet or combine it with a flat mount to use it on ski/skate/surfboards, kayak and so on.
• High Quality Plastic Material, Lightweight, Sturdy mount, Excellent function. Extremely practical and convenient to assemble your camera
• Includes adhesive anchors, camera tethers for double security.You can install safety rope after installing the camera, it provides dual protection. The wrench can adjust all the screws except the screw which at the bottom, you need to use your own screwdriver.
• Package Content:1×Motorcycle Helmet Chin Mount, 8×Adhesive Pads, 2×Curved Mounts, 2×Flat Mounts, 1×J-hook Buckle, 1×Screw Driver, 1×Safefy Buckle, 1×Long Screws

Product description

Specification:

Material: PC+ABS+Silicone

Weight: about 50g

Size:9cm x 10cm x 10cm



Packing List:

1 x Motorcycle Helmet Chin Strap Mount



Note: The camera and screw are not included; Please do not fold the bracket.



If you meet any confuse, please contact with our after-sales team.

• Update Material: High quality PC material for the chin mount, makes it lightweight and strongly fixed with your camera, help to captures every wonderful moment
• Unique Design: With strap design, the mount can be fastened on your full face helmet chin position. Adjust the tightness by the buckle and strong enough to secure the camera
• J Type Hook: The J hook on the chin mount can be connected with various sport action cameras, convenient to install and remove
• Silicone Base: This helmet chin mount adopt silicone base, can better fit with the helmet, offers stable mounting, provide you a great motor cycling shooting
• Compatible with Gopro Hero 8/7/6/5/4/3, SJCAM AKASO/Xiaomi Yi and most of other Action Camera

• Perfect Fit for GoPro: Multi-Function GoPro helmet mount kit, that is brand new developed motorcycle / bike helmet chin mount products for GoPro Hero Session
• Specialized Accessories in Combination: This helmet mount kit for GoPro providing best solution for motorcycle driver to record from top or side with best picked GoPro mount
• Curved Mount with Sticker: Industrial strength waterproof sticky pads,help you install your camera on the helmet.
• Swivel Arm Mount: It's made up of 4 joints and connect by screw.The screw can be adjusted so that you can rotate the joints rotated 360 degree.
• Safety Rope Buckle Wrench: You can install safety rope to provides dual protection after installing the GoPro Hero or sports action camera .

User questions & answers

Question:	Will this for gopro hero 8 black
Answer:	Dear Customer Thank you very much for your inquire. Please refer to the following link for tube. https://www.amazon.com/dp/B07C7N8MB5?ref=myi_title_dp If you have questions or need replacement parts in the future, call us at 1-877-BIKEAID (245-3243) or email us at [email protected] and we would be pleased to assist.
Question:	Will it break if i fall going about 70-80 miles an hour and a direct hit
Answer:	Dear valued Amazon Customer, It is a regular tire and tube. If you have additional questions about the Royal baby Space Shuttle Magnesium Kid's Bike- call us at 1-877-BIKEAID (245-3243) and we would be pleased to assist. Thanks and best!
Question:	Is this mount compatible with the Gopro hero 7 silver or gopro hero 7 black
Answer:	Sorry, not for the time being.
Question:	Does it fit gopro hero 8 black
Answer:	No, 18" it does NOT. I purchased two 18" models and neither had training wheels, only the stand. At this time only the 14" and 16" models seems to include the training wheels.

• ☆ High quanlity PC material for the mount, makes it lightweight and strongly fixed with your camera.
• ☆ This helmet strap mount need to be used with folding mount, which could provide more conveniently degree to get video.
• ☆ The direction and the angle can be adjusted to your needs, perfect camera angle for POV filming
• ☆ Ideal fit for Shoei RF series (RF1100, RF1200, etc.) and Bell Qualifier helmets and other curved chin helmets(full face helmet)
• ☆ Compatible with GoPro Hero 3 3+ Hero 4 Hero 5 Hero 6 Hero 7 Hero 8 Hero 9 Black Media Mod White Silver Session, Xiaomi Yi, SJCAM AKASO, Campark, Polaroid, Madventure 360, Mi Sphere 360 camera, YI Lite, APEMAN, DJI OSMO ACTION and most of other action cameras.

User questions & answers

Question:	Will it work with the hero plus
Answer:	Hi El,Thank you for your inquiry. Yes, as long as you have the correct adapters, they should work well with your camera. Hope this helps!Please don't hesitate to get in touch with us should you have any other questions, we're always around. :-)Kind regards,Dan / Nordic Flash
Question:	Is it compatible with cooau 4k camera
Answer:	Hi Dave,Thank you for your inquiry. This should definitely work with your Dragon Touch Vision 3 as long as you do have the right adapters. Hope this helps!If there's anything else that we can assist you with, please let us know, we're always available. :-)Kind regards,Manilyn / Nordic Flash
Question:	Will this fit a GoPro hero
Answer:	It works fine, just make sure you choose an appropriate spot for either the flat or curved mount.
Question:	es compatible con la gopro hero 9 black
Answer:	Hi April,Thanks for your interest and question about our product.There are six sticky tapes attached on the flat and curved mounts in the package.Happy shopping!Regards,Sametop

Product features

Package Included

• 1 x Helmet Chin Strap Mount
• 1 x Fixed Strap
• 2 x Folding Adapter
• 2 x GoPro Screw

Using with Rotatable Adapter

• Support to be adjusted with multiple angles you want.
• The hard material makes it more stable and not easy to shake.

Without Rotatable Adapter

• Support to rotate 180 degree.
• This way is closer with helmet.

Using Effect on Your Motorcycle

• First person shoot when you cycling

Product description

The chin assembly can be mounted on either side of the helmet's chin, front and rear of the helmet, or on the top of the helmet. The wrench in the package can be used to assist the set screw.



The helmet chin mount is with extension which can swivel 180º, so you can adjust to wide range angles, such as forward visibility, backward visibility and blind area.



This product uses a strong double-sided sticker that can be tightly attached to the helmet. Use the included safety buckle and attach it to the side to provide double protection for your action camera.



You can combine the J-hook mount with curved mount to use it on helmet or combine it with flat mount to use it on ski/skate/surf boards, kayak and so on.The sticky pad can be removed by peeling it off from the edge, or be removed cleanly after heating with the hair dryer.



HOW TO USE IT?

Step 1: Rip the double-sided tape onto the slide base.

Step 2: Adjust the bracket angle in advance and align the position where the helmet should be attached.

Step 3: Attach the bracket to the base.

Step 4: Hang the safety buckle at the camera and bracket interface.

Step 5: Attach the safety buckle to the other side of the chin.

Step 6: Install the camera and tighten the screws on the bracket with a wrench.



Specification:

Material:Plastic

Suitable for:GoPro Hero 6 Black,Hero 5 Black,Session 5/4,4 Silver,3+,AKASO/Campark/Crosstour/APEMAN action camera,SJ4000/5000/6000,Xiaomi YI/4K,LD4000/6000,Sony Sports DV,etc.



Product Includes:

1*Motorcycle helmet chin mount

1*J-hook

2*Curved mounts

2*Flat mounts

10*Sticky pads

2*Screws

1*Safety rope buckle

1*Wrench

1*S-adapter

1*Release buckle



Note:

The camera and helmet are not included.

• ★SPECIFIC PRODUCT for MOTORCYCLISTS:Multi-Function helmet mounts kit,it's designed for motorcyclists.
• ★MOTORCYCLE HELMET MOUNT:It's made up of 4 joints and connect by screw.The screw can be adjusted so that you can rotate the joints,every joint can be rotated 180 degree.We give away a s-adapter to match your camera if there is a threaded hole at the bottom.
• ★SPECIALIZED ACCESSORIES in COMBINATION:This helmet mount kit for GoPro providing best solution for motorcycle driver to record from top or side with best picked GoPro mount accessories.
• ★ADHESIVE MOUNTS & STICKY PADS:Adhesive mounts divided into curved and flat mounts,you can use according to circumstances.Industrial strength waterproof sticky pads,help you install your camera on the helmet.
• ★SAFETY ROPE BUCKLE & WRENCH:You can install safety rope after installing the camera,it provides dual protection.The wrench can adjust all the screws except the screw which at the bottom,you need to use your own screwdriver.

User questions & answers

Question:	Will this work for the thieye t5 edge
Answer:	Sure, just a little then wipe the outside really good.
Question:	Will this work for nabi camera
Answer:	Yes, my husband and I have used it as a keychain for the past 2-3 years and it works great. Very lightweight and keeps keys quite organized. My only reservation is that for some reason the black locking mechanism on mine slide around every now and then and my keys fall off when in my purse or pocket. My husband hasn't experienced the same issue. husband hasn't had this issue so maybe I just due to the fact that my keys are in my black hole of a purse and faces much more abuse. I've since taken some pliers to expand the narrow hinge part of the carabiner and no long have the issue. Anyway, we think it works great.
Question:	Is this one good for a gopro hero session
Answer:	Yes. This is the #3.
Question:	Does it work with the new hero
Answer:	The opening for this S-Biner is just barely an inch. It will not fit over a 1" bar.