13 best ring doorbell 1 battery replacement

Replacing the battery in a Ring Doorbell 1 is a straightforward process. Here are the steps to replace the battery:

  1. Purchase a Replacement Battery: First, you need to obtain a compatible replacement battery for your Ring Doorbell 1. Ring typically offers official replacement batteries on their website, or you can look for third-party options that are compatible.

  2. Power Off the Doorbell: Ensure that the Ring Doorbell is powered off before attempting to replace the battery. You can do this by disconnecting it from the wall or turning off the power source.

  3. Remove the Faceplate: Gently remove the faceplate of the Ring Doorbell. It usually comes off by pressing down on the bottom and sliding it up.

  4. Access the Battery: Once the faceplate is removed, you'll see the battery compartment.Depending on the model, it may be on the side or at the bottom. Open the compartment to access the old battery.

  5. Remove the Old Battery: Carefully disconnect the old battery from the wiring inside the compartment. Make sure to note how the wires are connected for reassembly.

  6. Insert the New Battery: Connect the new battery to the wires in the same way the old one was connected. Ensure that the wires are securely attached.

  7. Close the Battery Compartment: Close the battery compartment securely.

  8. Reattach the Faceplate: Slide the faceplate back into place until it clicks and is securely attached.

  9. Power On: Reconnect the Ring Doorbell to its power source or turn the power back on.

  10. Test: After replacing the battery, test the Ring Doorbell to make sure it's functioning correctly. You may need to reconfigure settings or reconnect it to your Ring account if necessary.

Remember to follow any specific instructions provided by Ring for your Ring Doorbell 1 model, as there may be slight variations in the process. Regularly checking the battery status of your Ring Doorbell and replacing it when necessary ensures that your device continues to work effectively.

Below you can find our editor's choice of the best ring doorbell 1 battery replacement on the market
  

To replace the battery in a Ring Doorbell 1, follow these steps:

  1. Power Off the Doorbell: Before attempting any replacement, it's crucial to turn off the power to your Ring Doorbell 1. You can do this through the Ring app or by physically disconnecting the device from your doorbell wiring.

  2. Remove the Faceplate: Gently slide the faceplate off the front of the doorbell. It should come off easily, revealing the battery compartment behind it.

  3. Remove the Battery: Depending on the model, the battery may either be secured with screws or have a simple latch mechanism. If it's screwed in, use the appropriate screwdriver to remove the screws. If it has a latch, release it and carefully take out the battery.

  4. Replace with a New Battery: Ensure you have a compatible replacement battery for your Ring Doorbell 1. These are typically rechargeable lithium-ion batteries. Insert the new battery into the compartment, making sure it's properly seated.

  5. Reattach the Battery Cover: If you removed screws in step 3, reattach them to secure the battery cover.If it's a latch mechanism, close and lock it securely.

  6. Reattach the Faceplate: Carefully slide the faceplate back onto the front of the doorbell until it clicks into place.

  7. Power On the Doorbell: Restore power to the doorbell either through the Ring app or by reconnecting it to your doorbell wiring.

  8. Test the Doorbell: Ensure that your Ring Doorbell 1 is functioning correctly by pressing the doorbell button or checking its live view in the Ring app. The new battery should provide sufficient power for normal operation.

  9. Charge the Battery: If your new battery is not fully charged when you install it, plug in the Ring Doorbell's charger to charge the battery fully. This can take a few hours.

  10. Monitor Battery Life: Keep an eye on the battery life through the Ring app. Depending on usage and settings, you may need to replace or recharge the battery every few months.

It's important to note that Ring Doorbell models and their battery replacement processes can vary slightly, so it's always a good idea to consult the specific user manual or documentation provided with your device for the most accurate instructions. Additionally, ensure you use genuine replacement batteries or those recommended by Ring to maintain optimal performance and safety.

Below you can find our editor's choice of the best ring doorbell 1 battery replacement on the market
  

Ring Rechargeable Battery Pack

Based on 48 reviews Check latest price
  • Works with Ring Video Doorbell 3, Video Doorbell 3+, Peephole Cam, Stick Up Cam Battery (2nd and 3rd Gen), Spotlight Cam Battery, and Smart Lighting Solar Floodlight.
  • Powers your device for up to six months depending on motion and light settings.
  • Includes a quick-release tab to easily change the battery without moving the device.

User questions & answers

Question: Okay, if I charge a second battery, do I have to keep it on the charger or can I leave it in the box unplugged after charging till needed
Answer: I read the Ring Team's January 2020 answer that the battery can sit in the box for a few months unplugged after charging it. I did exactly that, and when I took the battery out of the box, it had discharged. It took more than 24 hours to recharge it. This has happened with both of the batteries (the one that came with Ring 3 Plus, and the one that I bought as a reserve). I bought the second (reserve) battery to put into the Ring to minimize "downtime" on the Ring device on my door. The Ring Team reply seems erroneous.
Question: Does this battery fit the video camera
Answer: After talking with a Ring rep. The battery will fit for the ring 3, 3 plus ring stick. Will fit all models of the ring which are battery operated.
Question: Does this come with the charging cable
Answer: It does come with a usb cable to charge the battery. In addition, I purchased a second battery, so I always have a quick replacement. The additional battery also came with a charging cable.
Question: how long the battery last
Answer: I have been running mine for 24 days now on a single charge. Initially I had it set to allow "live view" and it was really dropping the charge fast. In 3 days it went from 100% to about 80%. Now, after turning that feature off, it has gone from 80% down to 27% in 21 days. I think one reason for the rapid drain may be that our outside cat has figured out that if she sits on the garbage can, we will eventually open the door and let her in. I want to wait before recharging to see how long it will go before it starts begging for attention. Regardless of how long it lasts before requiring a recharge, I am going to purchase a backup battery so I can switch them out instead of having to worry about down time. In my opinion, Ring should package it both as it is currently sold and optionally with a second battery for those who do not have/want wiring. Yes I understand that there would be a price difference in the packaging but that is to be expected.

Solar Charger for Ring Video Doorbell (1st Gen)

Based on 7 reviews Check latest price
  • Convenient power to help charge and extend the battery life of your Ring Video Doorbell (1st Gen).
  • Secure mounting bracket with built-in solar panels.
  • Weather-resistant design and easy installation.
  • Requires several hours of direct sunlight every day. Ability to recharge varies based on device settings, motion notifications and sun exposure in the area of placement - not ideal for porches.
  • Only works with Ring Video Doorbell 1st Gen (doorbell sold separately).

User questions & answers

Question: Can the corner kit be used with this
Answer: No it doesn't contain the screw for the bottom. That's the whole reason I bought it and got it, no screw !
Question: can i install this after i already installed the doorbell? will i need to poke more holes to install this
Answer: Not sure the length is roughly the diameter of a quarter. I would measure one for you but they are already in the wall.
Question: Approximately how many hours of sunlight does it require
Answer: I actually bought this kit for the security screw that I lost to attach the cover. I could only assume...that the drill bit is the same as the original.
Question: How much sun does this actually need? My front door only gets direct sun for about 5-6 hours a day, in the morning
Answer: This will work with your original Ring, but it is available from Ring for 2 dollars and 3.99 shipping.

TURPOW NP-F550 NP-F570 NP-F530 NP-F330 Battery [ 2 Pack, 2900mAh ] Compatible with Sony CCD-RV100 CCD-RV200 CCD-SC5 CCD-SC6 CCD-SC55 CCD-SC65 CCD-TRV66 CCD-TRV67 DCM-M1 DCR-SC100 LED Video Light

Turpow

Based on 131 reviews Check latest price
  • 100% Compatible with Original Battery: 2 packs 2900mAh NP-F550 replacement lithium-ion batteries can either be charged when install in camera or be directly powered with the 5.0V/2.1A USB input charger.
  • Perfect Battery Performance: 2X your camera runtime with 2 backup replacement batteries, Don’t worry about power fail when you want to record beautiful moment.
  • Standard Compatible: Made to the exact specification of Sony NP-F550 NP-F570 NP-F530 NP-F330 Battery, compatible with NX5 TRV1/TRV3 TRV9E/46E/49E series etc. ( See below descriptions for the full compatibility list).
  • 100% Safety Guarantee: Built with multiple circuit protection ( over-charging, short-circuit, high-temperature and surge protection), and high-quality, fire-resistant construction.
  • What You Get: 2 Pack NP-F550 Batteries, 30 days money back; 12 months warranty and friendly customer service guaranteed.

User questions & answers

Question: Is this compatible with the neewer 160 led
Answer: China
Question: Will these work in ring devices? tia
Answer: 2i is a newer design, that now works with Apple AirPlay, according to the documentation. (I think the "i" is by analogy with iOS".)
Question: Will this battery work with esddi lights
Answer: I imagine it would work. I am using a NAD 368 and a single Pulse Flex 2i joined in a BluOS group. My Flex 2i is wireless, but it also has an Ethernet port.
Question: Will this battery charge on a sony npfz100 charger
Answer: Thanks for your question. The Pulse Flex 2i comes with a plug in AC cord. A battery pack and wall mount bracket are available separately from Bluesound. World Wide Stereo is 40 years old and a proud authorized Bluesound dealer.

Doorbell Battery Kratax 6200mAh Lithium-ion Rechargeable Battery with Charger Compatible with Video Doorbell 2/3, Spotlight Cam, Stick Up Cam and Peephole Cam doorbell

Kratax

Based on 370 reviews Check latest price
  • 🔔Ultra-long Standby Time: Powers your device for more than 6 months depending on motion and light settings. 30 days money back and 12 months free replacement !(Please see the real product for detailed information,you won't be disappointed)
  • 🔔Compatible with: Video Doorbell 2 / 3, Video Doorbell 2, Spotlight Cam, Stick Up Cam and Peephole Cam.
  • 🔔Multi-Protection: CE / FCC / RoHs Certified, built-in safeguards protect your devices against excessive current, Over-Heated, Over-Charge, and Short-Circuit Protection.
  • 🔔Superior Service:All the Kratax products come with 90 days money back and 12 months free replacement! So please feel free to contact us if anything goes wrong.
  • 🔔Package contents: 1 x Kratax 6200mAh Rechargeable Battery,1 x USB Power Cable, 1 x Battery Tips, 1 x Tool, 2 x Anti-theft screws

User questions & answers

Question: Does it work with ring doorbell 3 plus
Answer: YES! This battery is compatible with the neewer 160 led.
Question: Does this work for Video doorbell
Answer: Marine battery doesn’t have a model number on it but it’s for the ring peephole camera and it says model number V for rechargeable lithium ion battery 3.65 V 6040 MAH 22.046 WH can anyone tell me if this will work
Question: I have an original Ring doorbell and would like to know how this battery mounts ,is it separate and cabled to the doorbell
Answer: This battery is working without problems connected to my ESDDI Model PLV-250. I would not know about other models, but I would check the battery specifications. If you have a different model and if it says it will take a Sony NP-550 battery, I would think it would work.
Question: How do i get a replacement its not charging anymore
Answer: Dear Customer, Thank you for your question! I think this battery doesn't charge on a sony npfz100 charger.

Product features

Product description:

  • Chemistry: Lithium-ion
  • Voltage: 3.65V
  • Capacity: 6200mAh
  • Watt hour: 24.455Wh

Ultra-long Standby Time

Powers your device for more than 6 months depending on motion and light settings.

LED Indicator

Charging -- Red light flashes

Full Charged -- Red light went out

USB Charging

Charges with Micro USB cable, compatible with any charger or equipment with a USB part.

Multi-Protection ---

  • Over-Heated Protection
  • Over-Charge Protection
  • Short-Circuit Protection
  • Over- Discharge Protection
  • Output Over-Voltage Protection
  • Output Over-Current Protection

Ring Batteries Charger for Ring Rechargeable Battery,Dual Ring Battery Charger Station for Ring Spotlight Cam Battery,Ring Video Doorbell 2 & Ring Stick Up Cam Battery (Ring Batteries NOT Included)

GoHonor

Based on 4 reviews Check latest price

Product description

GoHonor Charging Station Charges your Ring Video Doorbell, Peephole Cam, Stick Up Cam Battery (2nd and 3rd Gen), and Spotlight Cam Battery

Simply take out the batteries from the devices and plug the Ring Battery to the Charger.



-- Compatible Models:

Ring Video Doorbell 2

Stick Up Cam Battery (2nd and 3rd Gen)

Spotlight Cam Battery

No more Downtime,The Ring battery charger station can charge 2 of your ring batteries simultaneously



LED Status Indicator:

-- Orange LED for Charging ,Orange LED Off for Charge Completed

-- Green LED for Power on Indication



Material:

-- Plastic of Charger Station is Fireproof PC/ABS Material , Non Combustion and More Safety



Package Content:

1* GoHonor Charging Station

1* USB Cable

1* User Manual



Please note:

1. Ring rechargeable Batteries are NOT include

2. Use 5V/2A power supply, or above

  • 【Dual Charging】 This Ring rechargeable battery charger station can charge up to 2 ring batteries simultaneously, allowing you to change the batteries of your ring cameras via hot-swap and thereby reducing the downtime of your Ring camera. Compatible with Spotlight Cam Battery, Spotlight Cam Solar, Video Doorbell 2 and ALL-new Ring Stick Up Cam Battery (NOTE: Ring batteries not included)
  • 【LED Instructions】Orange LED for Charging ,Orange LED Off for Charge Completed , Green LED for Power on Indication, from Ring batteries LED display, easy to use
  • 【Versatile Charging Option】 This Ring Rechargeable Battery Charger input 5V/2.1A (or 5V/3A),USB cable connecting with your USB Adapter,car adapter,power bank.Gives you more options .Ring Rechargeable Batteries can slide easily in and out of the dual charging station, and each battery is charging individually, you can choose to charge only one or two backup batteries at the same time.
  • 【Quality Materials】Plastic of Charger Station is Fireproof PC/ABS Material , Non Combustion and More Safety,helps extend the life of the ring charging station.Over Charge Protection, Over Current Protection, Over Voltage Protection, Short Circuit Protection,protects the charger and your batteries
  • 【Package Included】 You can get 1x GoHonor Charging Station 1x USB cable,Note: Ring Rechargeable battery is not included, We fully comply with Amazon's return policy, Buy our products worry free

User questions & answers

Question: I never got my package. How do i contact
Answer: Dear customer, Hi! The 3M tape we provide is very sticky. It is generally recommended that you do not remove it after use to avoid shortening the service life of the tape. At the same time, we provide two types of spare tape for customers. One is generic 3M acrylic VHB glue,it is suitable for use on smooth material surfaces such as ABS, plastic, etc; The other is a special type (heat-resistant 3M VHB glue) suitable for slush plastic surfaces, leather texture materials, etc. We suggest that you read the instructions provided by us before using it according to your needs. If you have any problems, please feel free to contact us (email address: support@ayotumall.com) Have a nice day! OLAIKE
Question: Can you leave the battery on the charging stand even when the battery is charged
Answer: It’s a slightly different mount than the one that comes with the echo auto, but definitely not an improvement. I do not recommend it personally
Question: Can i use this for my ring 3 battery
Answer: Nope
Question: Every how long do this battery needs to be charged
Answer: Try to contact Amazon.

Ring Battery Charger, Dual Port Charging Station for Ring Spotlight Cam Battery, Ring Video Doorbell 2 & Ring Stick Up Cam Battery (Ring Batteries NOT Included) - by DECHIANY

Based on 5 reviews Check latest price

Product description

2-Port Charging Station for Ring Video Doorbell 2 and Spotlight Cam Batteries

High Compatibilty

This dual port charging station can be used for Ring Video Doorbell 2, Ring Door View Cam and Ring Spotlight Camera. Simply take out the batteries from the devices and plug the cable to the charging port.

No more Downtime

The Ring battery station can charge 2 of your ring batteries simultaneously, simply swap your low powered battery with a fully charged one for constant ring surveillance. This Dual Batteries Charging Station makes all this possible!

Notes:

1. Ring batteries are not included;

2. This product is ONLY compatible with Ring Video Doorbell 2 and Ring Spotlight Camera, NOT suitable for Blink XT Home Security Camera, Arlo system cam and any other cameras.

Package contents:

1 x Dual Charging Station

1 x Power Cable



  • 【MULTPLE CHARGING AT ONCE】 This Ring battery station can charge up to 2 batteries simultaneously, allowing you to change the batteries of your cameras via hot-swap and thereby reducing the downtime of your Ring. (NOTE: Ring batteries not included)
  • 【THOUGHTFUL DESIGN】 Our patent-pending design allows you to easily look Ring batteries indicator lights that show whether the batteries are charging or are fully charged.
  • 【EXCLLENT QUALITY】 Ring Rechargeable Batteries can slide easily in and out of the dual charging station, and each battery is charging individually, you can choose to charge only one or two backup batteries at the same time.
  • 【 FCC CERTIFIED】 The Dual Port Charging Station good quality fire shell material and built-in safeguards, provides a short-circuit protection and effectively ensures safe charging, against over-heating, over-current and over-voltage.
  • 【PACKAGES INCLUDED】 1 x Dual Charging Station; 1 x Power Cable. Note: Ring Rechargeable battery is not included. You can enjoy 12months warranty for this 2-Port Charging Station. If any problem, feel free to contact us. We'll surely help you and make you satisfied.

User questions & answers

Question: how long will my battery last at part time country house
Answer: Call customer service
Question: Compatible for My Ring 3 Doorbell battery
Answer: The problem with doing that depends on the charger. It's usually not a great idea to leave it on the charger because as the battery sits it will naturally lose 1% and then more as it sits longer. The problem is when it kicks back on. If it is a percent or 2 it will keep kicking on and off keeping the battery in a hot and expanded state. This is what shortens battery life as in how many years it lasts. If you do this all the time you can lose half the lifetime of a battery. You won't see the effect until it gets a year old and you finding that your capacity has decreased way more than normal. Once in while isn't a big deal but doing it all the time will definitely shorten your batteries life expectancy. Hope this helps.
Question: Why do the charging lights blink red and green
Answer: Yes, it can charger ring video Doorbell 3 battery
Question: Will this work with the Ring Stickup camera battery
Answer: I cannot exactly answer the specific time it takes to charge the batteries in the charger, but my routine is to plug the charger in the night before I plan to change a battery, and that is when the device has 50% battery power remaining. I would guess 4-5 hours.

2pack Ring Rechargeable Replacement Battery Compatible with Ring Video Doorbell 2 Ring Spotlight Cam and Ring Stick Up Cam

S7

Product description

Replace for Ring Video Doorbell 2,Door View Cam, Stick Up Cam, Spotlight Cam



Voltage: 3.65V



Built-in the metal clip to avoid falling out easily when you insert or remove the battery.

  • Compatible with Ring Video Doorbell 2 Ring Spotlight Cam and Ring Stick Up Cam
  • Super easy to install, easy to use, plug and play, quick release tabs can easily install the battery;
  • Built-in multiple circuit protection (over-charging, short-circuit, high-temperature, and surge protection) and fire-resistant construction can ensure your safe charge.
  • The battery pack can be last 6 months depending on your ring doorbell device setting
  • What you get: 2 x 3.65V Voltage, 6040mah batteries.Built-in charger port, rechargeable battery, no need to buy batteries frequently.

August Connect Wi-Fi Bridge, Remote Access, Alexa Integration for Your August Smart Lock

August Home

Based on 4 reviews Check latest price

Product description

Lock and unlock your August smart lock from anywhere, right from your smartphone. Accessory to August smart lock.



Disclaimer

Warranty is only effective for US and CA customers.

  • Control your door from anywhere.
  • Connect your August Smart Lock to Wi-Fi. Requires North American outlet with 110-240 volt.
  • Always know that your door is locked. Requires iOS (9.0 or higher) or Android (5.0 or higher) smartphones
  • Lock or unlock your door, even if you are away from home.
  • Voice control? Connect your lock to Amazon Alexa, the Google Assistant or Siri.
  • Get instant alerts when someone enters or exits your home.

User questions & answers

Question: Do I need this in order for the lock to work
Answer: No. The lock itself works over Bluetooth which has an effective range in a house of perhaps 40 ft. The Augusy Connect connects to the August service via your home wifi and then uses the lock's Bluetooth connection--in short, it's extending the range from ~40 ft to Internet-infinite; in theory, if both you and your house have an Internet connection, you can open the lock from anywhere in the world. If you only care to open the lock when you or someone else authorized is stood in front of it, then the lock alone is enough. That said, I'm on my 3rd August Connect and it's also beginning to misbehave disconnecting at random--don't buy the Connect if the lock alone meets your needs.
Question: What is the power input rating (voltage) for the August Connect
Answer: It says 110 - 240v 50hz - 60hz.
Question: Do you need to have August Connect to be able to use August Smart Lock? If not, what does it do that Smart Lock doesn't
Answer: The August lock by itself opens via blue tooth. Meaning you need to be within 15-30 feet. The connect makes it wifi, but it's buggy at best. The device connects to the lock via Bluetooth, and then you connect to the device via wifi. It works 1% of the time for me. Wait for an update.
Question: can this unit control multiple door locks
Answer: This unit barely controls one door lock, much less multiple.

Product features

Remotely control your lock

Lock and unlock your August Smart Lock from anywhere, right from your iOS or Android smartphone. Let guests in and lock the door behind them, no matter where you are.

No more wondering.

Always know if your door is lock or unlocked. Check your lock's real time status any time, from anywhere. Know instantly if your August Connect goes offline.

Control with your voice.

August Smart Locks work with Alexa, the Google Assistant, and Siri to lock/unlock your door, check the status of door, and pair with other compatible smart home devices.

*Siri only works with August Smart Lock Pro with Homekit

Companion products to August Smart Lock.

Find the best style for your home with August View’s custom faceplates. Simply slide the faceplate of your choice into position for effortless coordination with any entryway. Even more choices are coming soon.

AKZYTUE 3.7V 2000mAh 103750 Lipo Battery Rechargeable Lithium Polymer ion Battery Pack with JST Connector

AKZYTUE

Based on 22 reviews Check latest price

Product description

Description:

This battery is really the latest state of the art technology in rechargeable. It is extremely thin, light weight and super thin compared to any rechargeable chemistry.Low weight, small size but huge capacity.The other advantage of the Lithium Polymer technology is the very low self discharge .



Features:

* Rechargeable high volume Lithium-ion Battery

* High capability,Lightweight,Low internal resistance

* Excellent safety performance,Excellent discharge performance

* Long cycle time;Can be used in MP3 MP4 GPS PSP PAD and a variety of electronic readers



Applications:

Electrical Teethbrush, MP4, Mobile Phone, MID,baby monitor, small flying helicopters, backup power, Portable DVD, POS machine, Desk vidio, E-BIKE, motor, drill and Digital camera.



Note:

Red connect "+" ,Black connect "-" ; the battery size has -3mm-18mm tolerance, In order not to damage the battery or shorten battery life, high voltage charging and incorrect connecting of the positive and negative pole is prohibited.

  • Voltage: DC 3.7V; Capacity: 2000mAh
  • Package Content: 1 x Lithium Polymer Battery
  • Material: Lithium Polymer; Net Weight: 39g
  • Connector Type: 2P 2mm Pitch; Cable Length: 5cm / 2"
  • Size: 50 x 37 x 10mm / 1.97" x 1.46" x 0.39" (L*W*T)

Battery and Charger for Ring, Batteries 1 Pack and Dual USB Charger for Ring Spotlight Cam Battery, Ring Video Doorbell 2, Stick Up Cam, Rechargeable 3.65V Lithium-Ion Battery

SHENZHEN CITY WEGWANG ELECTRIC CO LTD

Based on 2 reviews Check latest price

Product description

Extra Power replacement for Your Ring Video Doorbell 2, Ring Spotlight cam and Ring Door View Cam. Notice: The battery is NOT compatible with the Ring Stick Up Cam! The rechargeable replacement battery for Ring Video Doorbell is as same as the original one with up to 5-6 months life time. NOTE: The battery life is depending on your device’s motion and light settings. The battery life may range in different working environments.



Tips for Battery Caring:

1.Be sure to place the device or battery charger on a non-flammable surface during charging. Ring rechargeable battery may explode or leak if disassembled or dropped into fire.

2.For protection of rechargeable Ring battery life, a new battery comes with 40%-60% power. Please fully charge all batteries before first using until battery indicator turns green.

3.Disposable (alkaline) batteries are not rechargeable and should never be placed in a charger.

4.Don’t store batteries unused for long periods of time with less than 20% of charge. Because batteries self discharge on their own, storing empty or near empty batteries may cause them to over drain (voltage drops below 1.0V) which can have adverse affects on battery life or completely damaging them.

5.Rechargeable batteries do not last forever and degrade over time. Temperature and storage conditions may affect battery life or degrading rate. Take care of batteries and they will last longer for you. Eventually rechargeable batteries will still need to be replaced.

6.Charge batteries to 40% or more before leaving them unused or for long term storage (3-6 months+).

7.Once a battery charger indicates batteries are fully charged, remove the batteries from the charger and unplug from the wall.



Specification:

Capacity: 6500mAh

Voltage: 3.65V

Weight: 249g(Battery and Charger)



What You Get:

1 *Replacement Batteries

1 *Dual USB Charger(Micro USB is built-in)

  • FULLY COMPATIBLE: The replacement battery 100% compatible with Ring Video Doorbell 2 / Ring Spotlight Camera. This replacement battery has the metal clip and works perfectky like OEM. Notice: The battery is NOT compatible with the Ring Stick Up Cam!
  • POWERFUL BATTERY CAPACITY: Premium cells create quality batteries. 6500mAh high battery capacity for continuous surveillance.
  • MULTIPLE CHARGING OPTIONS: This battery charger using general USB cable and micro usb port input(5V/2.1A), can charge wherever there is a USB jack or cable by just connecting with your laptop, car adapter and power bank. Gives you more options than a standard battery charger. The Micro USB charging cable is built-in in the charger station.
  • Safety Features(Built-in Multiple Circuit Protection): CE FCC Rohs certified, built-in safeguards protect your devices against excessive current, overheating and overcharging.
  • This ring charging station built-in LED Digital Display Screen,can easily shows the percentage of battery life in digital format, no more guessing whether it charge or not!(The light will darken after about 23 seconds of charging). WHAT YOU GET: 1*Replacement Battery for Ring, 1*Dual USB Charger Station for Ring, and our 18-Month Manufacturer Warranty and 24-Hour Customer Service.

All-New Battery Replacement (2-Pack) Compatible with Only Ring-Doorbell Camera 1 and 2, Spotlight Camera and Stick Up Camera, Rechargeable Upgraded Lithium Li-ion Batteries/3.65V/6040mAh Camera Indoor

LiBatter

Based on 536 reviews Check latest price

Product description

Great Compatibility - Upgraded Battery compatible with Ring Video Doorbell 1, Camera 2, spotlight camera and stick up camera, so you'll always have backup power.

  • Great Compatibility - Upgraded Battery compatible with Ring Video Doorbell 1, Camera 2, spotlight camera and stick up camera, so you'll always have backup power.
  • The rechargeable battery can go months between recharges with normal use. This is dependent on a number of factors in your home’s environment such as the local weather and the number of activities captured. The battery can suport your door bell for around 6 months.
  • This battery replacement has metal clip which can hold the battery when you insert or remove the battery.
  • Protect every corner of your home with Spotlight Cam Battery. All of these batteries can be recharged when the power runs out.
  • The battery adopts Grade A battery cell, good quality fire shell material and built-in safeguards, providing short-circuit protection and effectively ensures safe charging, against over-heating, over-current and over-voltage.

User questions & answers

Question: Can ring door bell 2 battery work in th ring door bell
Answer: Do you mean that your ring battery cannot be charged? If so, you can purchase our battery as a replacement, our battery is as good as the original battery. If you mean that you have purchased our battery but cannot be charged, please contact the seller for a free replacement.

dosili Battery 2 Packs Rechargeable 3.65V Lithium-Ion Battery Battery That is Compatible with Ring, for Video Doorbell 2/3 and Spotlight Cam Battery 6400mAh

Dosili

Based on 94 reviews Check latest price

Product description

Battery can be charged but no work?

Please rescan the QR code on your Ring device,then let your Ring join the Ring Wi-Fi network again.



Extra Power for Your Ring Video Doorbell 2, Ring Spotlight cam, Ring Stick Up Cam, Ring Door View Cam.



6400mAh rechargeable battery, lasts for about 3-6 months, battery life varies based on settings, usage & temperature.



NOTE: The battery life is depending on your device’s motion and light settings. The battery life may range in different working environments.



Specification:



Rechargeable battery Specification:



Capacity: 6400mAh



Voltage: 3.65V





Charging Station Specification:



Input:5V/2A



Output: 5V 800mA



Size:2.44*2.44*0.88 inch



What You Get:

2 Packs Replacement Batteries



2 in 1 Micro-USB Charging Cable

  • 【 Same with Original】Works with Ring Video Doorbell, Peephole Cam, Stick Up Cam Battery (2nd and 3rd Gen), Spotlight Cam Battery, and Solar Floodlight。Includes a quick-release tab to easily charge the battery without moving the device
  • 【High Quality】Rechargeable lithium-ion battery with premium cells ,Voltage: 3.65V, Capacity: 6400mAh The battery powers your Ring device for up to 6 months, depending on motion and light settings。
  • 【Multiple Protection】 Features four layers of protection (over-charging, short-circuit, high-temperature, and surge protection) with a high-quality, fire-resistant construction, ensure complete protection for you and your devices
  • 【WHAT YOU GET】2 Packs Replacement Batteries, 2 in 1 Micro-USB Charging Cable, 24-Month Manufacturer Warranty and 24-Hour Customer Service.

Spare Parts for Ring Video Doorbell

Based on 1 reviews Check latest price
  • Set up your Video Doorbell in just a few minutes with spare parts.
  • Replace any lost or misplaced parts for your Video Doorbell.
  • Comes with a mounting bracket, screwdriver, drill bit, charging cable, screws, connectors, wire nuts and stickers.
  • Only works with Ring Video Doorbell.

User questions & answers

Question: Does this pack contain screw to secure ring housing on bottom
Answer: yes
Question: what are the anchor and mounting screw sizes? I just need new brick mounting anchors, not the whole kit
Answer: Yes, it works with doorbell 3plus.
Question: What size is the drill bit
Answer: Yes, this battery work for Ring Video Doorbell 2.
Question: will this back plate work with all versions of the ring doorbell camera ? i have the first one offered
Answer: The battery is separate. You can replace the battery by removing the screw under the doorbell with the tool provided, and this product comes with replacement instructions.

Latest Reviews

View all

Bestforyall.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to products on Amazon.com and any other website that may be affiliated with Amazon Service LLC Associates Program. Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates.