12 best rca outlets

Product description

Tooless Connection Just plug one cable into the front and one into the back of each port.

• Tooless Connection Just plug one cable into the front and one into the back of each port.
• Wall plate looks the same on the front and back (female to female).
• Fits standard outlet boxes and low voltage mounting brackets.
• Jacks in RiteAV plates are removeable for future upgrades.
• High quality item. Screws included.

User questions & answers

Question:	Is the connection in the back an RCA or F-type connection
Answer:	Aiwit

Product description

This is a 2 Piece Decorative Wall Plate (plate and plate cover). Tooless connection, Just plug one cable into the front and one into the back. High quality, screws included. Fits standard outlet boxes, decorative plates and mounting brackets. Female on both sides of the plate jacks for easy plugin. 4 inch distance between screws.

Please note:

This is not a GFCI outlet and is not to be installed near or behind a kitchen sink, bathtub, bathroom or within 12-15 feet of any source of water. Must be installed into a new or existing plastic or metal outlet electrical box for safety. Do not install this with a drywall only mounting bracket.

It is recommended to install this item in a divided outlet box. Recommended compatible outlet boxes Carlon BH234R (Old work).

• Popular brand name power outlet 2 Plug - 15 Amp 125 Volt Receptacle on one side
• 2 x HDMI Ports and 3 x RCA Composite (Red White & Yellow)
• 1 x Coaxial Cable TV F Type Port
• Keystone Jacks are removeable unlike competitor plates for future upgrades.
• Insert with jacks can be removed from the thermoplastic plate for easy installation.

User questions & answers

Question:	Can i get this in brown or black
Answer:	2" depth, 5" height, 9" wide
Question:	What HDMI spec do the connectors support? HDMI 2.0? 1.3a
Answer:	This is a door bell chime kit only. It does not include a camera
Question:	For the RCA do you need a male/ male cord to connect back to the receiver
Answer:	It's not recommended, but is currently working fine with my Ring VDP -- This doorbell comes with a transformer rated for 10va. According to the Ring Video Doorbell Pro troubleshooting guide, it is recommended to use a 20va transformer if the transformer is only powering the Ring, or a 30va transformer if the transformer is powering a Ring + standard indoor chime. With that said, I purchased this specifically for a Ring Video Doorbell Pro (without thinking of the transformer power requirements) and just set it up and the Ring VDP is working fine and the voltage is listed as "very good" under "health" in the app. I even set up the "back" doorbell, so this 10va transformer is powering 2 chimes + the VDP: I just tried opening live view on the app and pushed the "back" doorbell (standard doorbell included in this kit) a bunch of times and it rang every time, and the Ring live view continued playing. My wiring run is pretty short (~25') and the VDP has an internal battery so I have a feeling the recommended transformer ratings are on the high side to account for sub-optimal wiring situations such as very long wiring runs or old/smaller gauge wire. With that said, you can order a doorbell kit with a higher rated transformer, or order this kit + a higher rated transformer to use instead of the included one, like this 30va transformer: https://www.amazon.com/NuTone-C907-16V-30VA-Transformer/dp/B001POBN92 If you don't mind having to possibly replace the transformer, you could get this kit and see if it works, and if not, simply replace the transformer while leaving the rest of the system intact.
Question:	what kind of 2 gang box is used with this is it up to code to have low voltage and 110 in the same box
Answer:	Thank you for the question. This can hook up to a wired door chime.

Product description

RCA A V White Decora Wall Plate Insert, 3 RCA Female Couplers (Red White Yellow).Connection: RCA Composite Video Audio Male Jacks. Connection: RCA Composite Video Audio Male Jacks. Color: White. Weight: .8 lbs.

• Warranty: Lifetime
• Connection: RCA Composite Video/Audio Female Jacks
• Has three RCA Composite Video/Audio male jacks
• Decora Wall Plate Insert

User questions & answers

Question:	What connection is on the back of the plate? Female just like the front
Answer:	Not if your receiver has male connectors, then you'd need a male to female chord.
Question:	Any idea if I can unscrew the existing connectors so I can replace them? Also what's the size of the hole if that's possible
Answer:	You'll need a split low voltage high voltage box. You can find them on the shelf at home Depot or online http://m.homedepot.com/p/Carlon-2-Gang-Dual-Voltage-Box-4-per-Case-SC200DVR/202197726/. The problem with mixing low and high voltage is you could energize the low voltage system if you accidentally crossed wires. See NEC 800.133 (A)(1)(d). The exceptions listed do not apply.
Question:	What are the dimensions of the plate (for the wall plate's opening
Answer:	RCA
Question:	Are these available in black
Answer:	Hello. Yes it comes with a 16-volt 10VA Transformer per the packaging.

Product description

Provides wall-mounted wire connection for one subwoofer to your receiver or ampilifier (Also Suitable For Composite Video)

• Tool-Less Connection Just plug one cable into the front and one into the back of each port
• Provides wall-mounted wire connection for one subwoofer to your receiver or ampilifier (Also Suitable For Composite Video)
• 24K gold plated speaker terminals provide maximum signal transfer and prevent against corrosion
• Fits standard outlet boxes and low voltage mounting brackets
• Female connection both sides

User questions & answers

Question:	How do you connect the subwoofer cable . I dont see any threds / screws to tie the cable to the connector
Answer:	1-1/4 X 2-5/8
Question:	Is this double end female? Or can you connect coax to wall side
Answer:	This item is not available in black unfortunately.
Question:	What is the dimension of the plate
Answer:	it is available in black , you can order this one and ask for black or call the customer service #
Question:	How do i connect the black cable ( coax?) coming from the wall to this? How do i slice the cable and insert
Answer:	The hdmi slots will support hdmi 2.0 it will support Ethernet & 3D this outlet is a great choice for a theatre room

Product features

VCE Single RCA Keystone Insert with White Center Jack Wall Plate

• The VCE RCA Keystone Jack inserts provide a secure and quick way to connect an RCA cable to your equipment with RCA ports. These commercial grade inserts provide a time-saving and tidy alternative to running long RCA cables across the floor.

Quick and easy to install

• Without the need for too many tools, all you need is a standard screwdriver.

Well Matched with the decoration style

• Contemporary shiny design of these face plates provides a professional visual enjoyment.
• Gloss finish without recessed lines make it easy to clean.
• White matches your home decoration style.

Reliable Signal Transmission

1. Secure snap-in clip
2. Gold-plated housing

• Standard rca port, run rca cable through a wall
• Ideal for subwoofer, stereo receiver, or other equipment with rca component audio and video ports

Superior Construction

• UL certified(E363400) standard size faceplate with universal keystone port.
• Fire-retardant housing for a safe install.
• Heat, fade, Impact resistant. highly durable.

Toolless Connection

• Easy snap-in installation of keystone jacks.
• You can simply replace the keystone for future upgrades, cost savings.

Package Contents

• 1 x Wall Plate
• 1 x RCA Keystone Jack Insert
• 2 x Screws

Product description

Gold Plated Copper Connector Binding Posts

The Fosmon home theater wall plate binding posts are made with high quality gold plated copper connectors that resist oxidation and corrosion. No soldering or special tools required. Matching binding posts on the front and back of the wall plate are equipped with easy to install thumbscrews that are color coded for polarity. Allows the connection of up to five speakers and has one RCA for connecting a subwoofer.

Easy to Install and Remove

The Fosmon home theater plastic wall plates are easy to install and include all the screws you need to mount them into standard size gang boxes (Gang box/Mounting bracket not included). Can be used with the included plate or used with any color GFI or rocker toggle switch plate of your choice.

Clean and Tidy Installation

Fosmon wall plates eliminate the clutter of wiring along your baseboards which results in a clean and tidy installation. Dedicated labeling on the plate simplifies room set up and configuration.

Connections

Fosmon home theater wall plates are designed to be used with banana plugs, spades or bare wire on both the front and rear of the plate. RCA connection for Subwoofer. Allows connection of up to 5 speakers and 1 subwoofer.

Specifications

Distance between positive & negative binding posts - 17mm (approx. 11/16in)

Depth of biding post from front to back – 25.4mm (1in)

Binding Posts - 5 pair

1 RCA jack for subwoofer

NOTE:

The subwoofer connection is an RCA connector on both the front and back sides

Banana jacks do not work with Paired/Dual banana plugs. Only works with single/individual banana plugs.

Gang box/Mounting bracket not included

Compatibility:

For use with banana plugs, spades or bare wire

• Built with high quality gold plated copper connectors that resist oxidation and corrosion (Gang box/Mounting bracket not included)
• Easy to install and remove with no soldering or special tools required. Mounts to standard size gang boxes
• Eliminate the clutter of wiring along your baseboards which results in a clean and tidy installation
• Dedicated labeling on the front plate. Use with banana plugs, spades or bare wire. Allows connection of up to 5 speakers and 1 subwoofer.
• Accommodates banana plugs on both front and back sides of the plate at the same time depending on depth of gang box.

User questions & answers

Question:	Can I get it in grey color? All of the rest of my outlets, switches, etc are grey
Answer:	Standard electric wall box, the same as the electric plates on the wall.
Question:	Is there a version fro 2.1 Speaker Setup
Answer:	RESPONSE FROM VCELINK: Thanks for asking. First you can load the rca keystone jack into the wall plate, then insert the rca directly into rca inline jack, finally install the wall plate to the wall by screws. Please feel free to let us know if you have any further questions by contacting us through Amazon's messaging center. Open the product page, click on "Sold by VCELINK" and then "Ask a Question".
Question:	what banana plugs work well with this wall plate
Answer:	Yes, it's female just like the front.
Question:	what banana plugs work well with this wall plate
Answer:	If I remember correctly there is a nut on the back side of the plate and the connectors come out. The hole in the plate is about the same size as the outer part of the jack

Product description

The RCA One AC and Two USB Outlet Anywhere lets you take an outlet that has been blocked and move it up to 5 feet without having to cut any walls or do any rewiring. It has one 2.4 amp USB outlet to let you charge your tablet quickly along with a basic AC out let and a standard USB outlet that can charge your smartphone. This is great for anyone who has a blocked AC outlet or for someone who would like to have a few USB charging outlets.

• Power strip creates a convienient 1 AC and 2 USB port from any hard to reach outlet
• Includes 2 USB ports for charging smartphones, tablets, cameras and other USB compatible devices
• Provides high speed charging capability

User questions & answers

Question:	How many amps can the outlet (not the usb ports) handle
Answer:	Used these and they were good.... Sewell Direct SW-29863-12 Deadbolt Banana Plugs, 12-Pair by Sewell Direct 4.8 out of 5 stars 4,598 customer reviews | 157 answered questions Amazon's Choice for "sewell banana plugs"
Question:	Can I plug in a heated blanket with this
Answer:	Sorry, I just used the screw mount option. Almost any banana plug will work if you prefer.
Question:	How does it mount to the wall? Does it have slots on the back or do you pull the cover and run screws through the back plate
Answer:	The subwoofer cable has an RCA plug at each end, just like a video plug or many other receiver plugs. If you look at the photo closely, you'll see a hole in the center. You just plug the cable into the hole! The other end of the cable plugs into the back of your receiver, which will have a label for the subwoofer pre-out, or some other wording that says subwoofer. If your receiver does not have this type of plug for subwoofer, you'll need to use a connector that will fit your receiver, and a different cable other than RCA. Hopefully your receiver has an outlet labeled for a subwoofer, and hopefully RCA. If not, you may not be able to use a subwoofer with your receiver. On the other side of the wall jack, the RCA plug is repeated. Plug another sub cable into the other side of the wall jack, run the cable through the wall to wherever you want to place your sub. Then, you'll want to place another wall jack near the sub. Finally, run another cable from the remote wall jack to the sub. Total wall jacks: 2. Total sub cables: 3. 1 cable from receiver to wall jack, 1 from inside wall jack to the inside of the other remote wall jack, and one from the remote wall jack to the subwoofer. I have it set up like this with 73 feet of subwoofer cable, and it sounds clear as a bell with no hum or unwanted noise.
Question:	How far does it protrude from the wall
Answer:	This is a single RCA coax connection. I used it to run a subwoofer cable in the wall from the amp to a corner in the room.

Product features

The Original Wall Plate Charger with Outlet Anywhere

Similar to a traditional extension cord, the Outlet Anywhere plugs into any hard-to-reach wall outlet, providing two USB charging ports and standard AC power wherever you need it. RCA wall plate chargers are the only products that deliver high-speed charging in patented designs that blend in perfectly with any room environment. Don't settle for less with imitations. All RCA charging products are rigorously tested for safety and quality. Get the best home chargers in the market with RCA!

Fast Charging

With a total of 2.4 Amps shared between 2 USB ports, this wall plate offers fast, full-speed charging for 2 smartphones simultaneously or 1 tablet. It’s ideal for charging gaming devices, eReaders, laptops/ notebooks, iPod, iPhone, iPad, digital cameras and more.

Simple Installation

Great for hard to reach areas behind beds, desks and dressers , this wall plate includes a 5 foot power cord with a low profile 45° plug for outlets in small, cramped spaces. Place the wall plate where you need it using the included mounting kit and simply plug in the power cord. Add USB charging to every room in your home!

Convenient AC Outlet

This innovative charging solution provides a single AC outlet that is perfect for plugging in other household electronics and appliances. Not only will you have USB charging in a convenient location, you’ll also get a standard power outlet.

Product description

The HTTX RCA composite Audio/video wall plate provides provides a commercial grade installation for home theater, game rooms, or business office audio/video applications.

The white decora-style wallplate blends seamlessly into any home decor and features connections for superior performance. The RCA Wall plate is designed to fit single-gang wall boxes, similar to an AC outlet or light switch. Installation is simple just use the included hardware to mount the wallplate and you¡¯re ready to connect your RCA cable. Create a clean, efficient space for your digital equipment with the HTTX RCA Wall plate.



HTTX Wall Plates and Keystone jack snap-in modules work with any NEMA identified outlet or flush mount bracket, patch panels, or surface-mount boxes.

• Pure Copper made nickel-plated RCA keystone connectors provide a reliable connection and distribute authentic audio and video
• The RCA keystone inserts are designed to easily snap in retaining clip ensure a secure and non-corrosive connection, also can be removed for future upgrades
• RCA wall outlet includes a faceplate that meets building specifications for low combustion wall outlets with flame-resistant, UL Listed ABS plastic construction
• HTTX RCA wall plate with traditional design fits to any standard outlet or flush mount bracket. The wall plate is the perfect finishing touch for your home and office decorating projects. Includes matching mounting screws.
• What You Get: 1x RCA Wall Plate 3-Port [Includes mounting screws]; HTTX 12-month warranty and friendly customer service.

Product description

Discreet HDMI Pigtail RCA Wall Plate sets up quickly to allow for neat, safe and convenient cable access

New Heavy Duty Screw Free Back Connector

No more worries of back connector breaking during install. Unlike other Brands or Older Models, this new heavy duty model gets rid of the screw in the back connector that sometimes would break on install.

New Model - No Gaps Mounting Bracket

No more worries of gaps between the drywall and wall plate, unlike other Brands or Older Models, this new model gets rid of the issue that would sometimes cause a gap after the installation.

Quick and Easy to Install

New Model Low Voltage Mounting Bracket included for easier install. Just plug in HDMI or RCA cable into the front and into the back.  High quality. Screws included. Fits standard outlet boxes and mounting brackets. Jacks are removable unlike competitor plates for future upgrades. White in color.



White Color Fits Your Home or Office

To maintain its neat and discreet design, the port is white color - exactly the same as most light switch and power plug wall plates - to maintain a consistent color scheme throughout your home or office.



Click Add to Cart now to have your brand new outlet insert wall plate shipped from the USA rushed directly to your door!

• New Heavy Duty Screw Free Back Connector: No more worries of back connector breaking during install
• HDMI 2.0, RCA Wall plate - Install screws are included
• Perfect for Home Theatre, DVD, Roku, PS4, Subwoofer
• New Model - No Gap Low-Voltage Mounting Bracket for easy installation
• MultiPacks Available, Search Amazon for Buyer's Point 1047_5. (2,5,10, and 25 multipacks available)

User questions & answers

Question:	What are the measurements of the middle plate? I have a dual cover and would like to replace one side. Looks like 1-5/8 x
Answer:	For the 2-gang wall plate, we don’t have a wall plate specifically for 2.1 setup. You can still can use HD8004 for the 2.1 setup. You can use whatever ports he needs and leave the extra ports for future expansion. We also have 1 gang (HD8002) or brush type (HD8195) for you.

Product description

Tooless connection with no wiring required. Just plug one cable into the front and one into the back of each port. High Quality item. Screws are included. Fits standard mounting brackets.

• Tooless connection. Just plug one cable into the front and one into the back of each port.
• Wall plate looks the same on the front and back (female to female).
• Fits most outlet boxes and low voltage mounting brackets.
• Jacks in plates are removable for future upgrades.
• High quality item. Screws included.

Product description

Recessed HDMI Wall Plate, with 1* HDMI F/F Adapter & 6 RCA Connector, Gold Plated White



Make your own in-wall video cable installation look like it was done by a professional using this Recessed HDMI®/RCA Wall Plate from Monoprice!



This wall plate features a gold-plated female/female HDMI coupler and six gold-plated female/female RCA couplers, allowing you to use ordinary* video cables to connect on both sides of the wall plate. The insides of the RCA jacks are color coded for the Component video, Composite video, and stereo audio, so you can easily match the right connectors for your video installation.



Note that this requires the use of a single-gang, low-voltage mounting bracket (sold separately).



*IMPORTANT SAFETY WARNING! When running cables through the walls, always use cables rated for in-wall, riser, or plenum use. These ratings ensure that the cable meets fire safety regulations. Failure to use in-wall rated cables could nullify any insurance claims in the event of a fire, even if they were not the cause of the fire.

• Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
• The insides of the RCA jacks are color coded for the component video, composite video, and stereo audio, so you can easily match the right connectors for your video installation.
• Note that this requires the use of a single-gang, low-voltage mounting bracket (sold separately).
• Important Ssafety Warning! When running cables through the walls, always use cables rated for in-wall, riser, or plenum use.
• These ratings ensure that the cable meets fire safety regulations. Failure to use in-wall rated cables could nullify any insurance claims in the event of a fire, even if they were not the cause of the fire.

User questions & answers

Question:	Does the hdmi port support hdmi
Answer:	Check the current draw on the electric blanket. The outlet I bought says it can handle 2.1 amps. I found a discussion about using electrical devices in RVs and it listed electric blankets at 0.5-1.5 Amps. I haven't used this plug for an electric blanket, but I think you'll be fine.
Question:	Is this beige or white
Answer:	It has two slots and comes with screws. I love the unit. Attached it to the base of my headboard.
Question:	I had one out of the two go bad after 2 years. How long is the Warranty and how do I go about returning if its still under warranty
Answer:	It doesn't stick to the wall. The cord and plug shown in the picture plug into the wall allowing you to move the outlet box to where you need it. Mine is not accessible to check (I used it in a shelf project) but I think there are spots to hang the box from a nail or screw. If that is what you're referring to, the box is fairly thick. It would stick out about an inch.
Question:	Is this item available in black
Answer:	I don't know, but I also use other colors as well.

Product description

MOAVEQ HDMI RCA F Type Wall Plate is great for your home, hide the cables in wall and keep a nice appearance, no wires mess.



Usage Instruction:

1. Dig hole on the drywall;

2. Just plug one cable into the front and one into the back;

3. Fasten the insert to the wall plate with the shorter screws;

4. Fasten the assembled wall plate to the bracket.

Note: The power outlet must be installed by an electrician and a split box must be used to separate the power outlet from the low voltage cables in the wall.



What You Get:

1x 2-Gang Power Wall Plate

2x 15A Power Outlet

2x HDMI Keystone Jack

1x F Type Keystone Jack

3x RCA Connector

8x Screws



Worry Free After Sale

HANLIN provides 12 months replacement or 3 months refund for your no worries about shopping experience. If any problem please feel free to contact us, thank you.

• 2-Gang Wall Plate including 2x Power Outlet 15A, 2x HDMI HDTV , 3x RCA, 1x Coaxial Cable TV F Type keystone jack. All keystone jack couplers are removable, easy for future replacing.
• Tooless Connection, Just plug one cable into the front and one into the back of each port. Fits standard outlet boxes and low voltage mounting brackets(not included).
• HDMI Port supports all HDMI 2.0 functions, 4K, Backwards compatible with HDMI version. Perfect for home theater systems, video game systems, Blu-ray player, TV boxes and more.
• RCA Keystone Inserts provide a secure and quick way to connect an RCA cable to your equipment with RCA ports. Gold-plated connectors resist corrosion, provide durability, and improve the signal transmission.
• Coax Wall Jack has a standard F connector used by cable companies to connect a modem, router or CATV box for video and internet service. Coax wall plate provides pass-thru of video and data from an RG6 coaxial cable.

Product description

The RCA Swivel Surge Protector not only keeps your valuable electronics safe from damaging power surges, it also cleans up the mess of power cords surrounding most floor surges or power strips. The Swivel Surge's 90-degree swivel outlets makes it a perfect fit behind furniture or electronics. And because the Swivel Surge plugs directly into the wall, it gets your power cords off the floor and out of the way.

• 6 Outlets swivel side to side
• 1200 Joules surge protections
• Manages and organizes cords
• Space saving design
• Protects equipment from damaging power surges

User questions & answers

Question:	How long is the cord
Answer:	I apologize for the inconvenience. Warranty is 1 year
Question:	should both led be on? one is ground and the other is fault
Answer:	Unfortunately it is not currently available in black
Question:	Is this item UL approved
Answer:	The middle is the same size as all other rectangular outlets but I warn you. There can be interference if you mix high voltage with low voltage
Question:	Is the green light & red light both supposed to be on at the same time and why
Answer:	I don't know exactly, but I did further research on my earlier response about the hair dryer. I may be pushing my luck, but it seemed to work fine. I'm sorry I'm not more help.