Product description

MOUNT-VP01W is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2” to 12.5”. MOUNT-VP01W sits 6” from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish.



Important Note: As mentioned above the mounting arms for this projector mount have a maximum reach of 12.5”. Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12.5” or less then this mount will fit your projector.



Compatibility

Fits most projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less

High-grade steel supports projectors up to 30 lbs



Features

15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing angles

Obscure mounting system holds your projector just 6” from the ceiling surface

Possesses quick release hooks that detach and attach by loosening and tightening mounting bolts

Quick assembly and comes with common mounting hardware

• Universal Projector Mount - Fits the majority of projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less.
• Strong 30 Lbs. Support - Made entirely of high-grade steel, this mount holds projectors weighing up to 30 lbs, keeping your expensive equipment safe and secure.
• Fully Adjustable - Features +15° to -15° tilt, +15° to -15° swivel, and 360° rotation. Hits all the right viewing angles so you and your guests can watch in comfort.
• Low Profile - This mounting system holds your projector just 6” from the ceiling surface. The white powder-coated finish blends well with the majority of home and office environments.
• Easy Installation - Quick release hooks attach and detach by tightening and loosening the mounting bolts. All necessary hardware and instructions are provided for assembly.

User questions & answers

Question:	Is this compatible with the viewsonic pa503s
Answer:	Hello, Thanks for checking! This is compatible with the distance between mounting holes on the back of projector are 12.5” or less., Thank you!
Question:	Will this fit the Optoma DH
Answer:	Thank you for your interest! This mount will work for projectors that have mounting holes up 12.5" apart diagonally or less and weigh 30 lbs or less.
Question:	Does this item fit the Epson Home Cinema
Answer:	Hello, Thank you for your interest! As long as the mounting holes on the projector are 12.5" apart or less and it weighs less than 30 lbs this will work for you. Thank you, VIVO Customer Support
Question:	Will this fit the Optoma hd
Answer:	As long as the mounting holes on your projector are no more than 12.5" apart, this mount will fit.Thank you!

Product features

All the right angles

Fully adjustable projector mount featuring 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles. The bolts can be tightened and loosened with the provided hex tool for flexible movement or securing in position.

Quick release

Easy installation with quick release hooks that attach and detach by tightening and loosening the mounting bolts.

Dependable mounting

Trust our mount to keep your projector safe and secure. Solid construction made entirely of high grade steel supports projectors up to 30 lbs. We provide the necessary mounting hardware.

Product description

The Universal Projector Mount sets itself apart from other industrial looking ceiling mounts. Styled from steel and die-cast aluminum, the mounts boast a clean and simple finished appearance when viewing it on the ceiling. The CGUPM06 extends approximately 12 inches from the ceiling, rotates, tilts and swivels in virtually any direction, and is capable of functioning on flat or vaulted ceilings. The Universal Projector Mount is compatible with most of todays LCD and DLP home theater projectors and is fully adjustable to fit a wide range of projector hole patterns.

• Universal LCD/DLP projector mount with 12" drop
• Tilt and yaw (roll) adjustment
• 360-degree rotation
• Individual height adjustment for each mounting arm

User questions & answers

Question:	Anyone using this mount for a JVC RS
Answer:	Yes, this usb c adapter works with the 2016 macbook with USB-C (Thunderbolt 3 ) port.
Question:	Is it sturdy, as in when i tighten an adjustment point will it move at all. my current mount is horrible. i swear if i sneeze it moves
Answer:	Nothing, just connect it to your computer
Question:	is it work with optoma hd
Answer:	Yes, the lenovo - 15.6" laptop has USB Type C port.
Question:	Can I use this to mount on a wall, not a ceiling? Do I need a drill to install, or will a plain old screwdriver set work
Answer:	Yes, it will work with macbook pro 13" model a1708.

Product description

This is a Brand New, solid, durable, all steel constructed projector mount that is universal and compatible to most of the projectors on the market: as long as there are three or four mounting holds on the projector body, this mount will fit.

This projector ceiling bracket package comes with standard extension pole 22” – 32” drop from ceiling. Length is adjustable.

This projector ceiling mount's drop length can be extended with our extension pole form 41" to 71" or 71" to 130". These extension poles are selling separately. The extension pole 41" to 71" can be found by searching "B01167ZNYI";

It is very easy to install: After fixed lower part to the projector and the upper part to the ceiling, just join the two parts with the drop tubes.

The projector can be titled up or sown 15 degree. This mount's tilt and roll can be adjusted independently of one another.

• Mounting arms removable and extendable. Come with standard Mount drop: 22" - 32", Drop length adjustable. Optional Extension Pole 41" - 71" can be purchased separately at ASIN: B01167ZNYI,
• The projector mount is heavy duty steel constructed. Loading capacity: 33 lb
• This projector mount can be used on flat ceiling or vaulted ceiling.
• The projector can be titled up and down 15 degree and turned 360 degree
• Projector can be quick disconnected from ceiling for simple maintenance

User questions & answers

Question:	does mounting screws come with in this package
Answer:	Yes it it has the small hole on the bottle
Question:	Will this with with Epson Home Cinema
Answer:	The pole on it seems to be a normal metal tube you could theoretically get some conduit pipe and have it custom threaded to fit for an extension but also keep in mind the further the projector sticks out the more strain it will put on the mount.
Question:	Does this unit will match the holes on my benq mh740 projector
Answer:	Hi there, please kindly note that the main pole just can't be extended telescopically. Any further help, just feel free to get back to us. Thanks!
Question:	I can not find the extension poles and have put in the suggested search. how do I find the extensions
Answer:	Yes it is very useful fit perfect and it swivels worth the money

• Compatibility--This Laptop/notebook Arm Mount fits up to 17 inch work with Apple MacBOOK, Surface book, HP, Acer, Sony, Toshiba, Chormebook etc.Extra VESA plate for 17-32 inch
• Steady&High Quality Material-- Made of heavy duty and outstanding premium aluminum alloy to guarantee the sturdy and stable, no dropping problem.
• Adjustable and removable --The laptop arm mount can be tilted up to 45 degrees and up to 42cm/16.5''s.You also can change this laptop stand to monitor Stand,The display stand can rotate 360 degrees, can Stay in any position, the arm can tilt to 145 degrees, the maximum extension length of 52 cm/20.5'', up to the height 43 cm/16.9''.
• Design fashionable and concise-- Advanced design in appearance and function , and nature aluminum light silver make it looks like very fashion and clean . The arm have cable management feature to organize wires and cables fit neatly behind. change the way you think about laptop stand and mount.
• Healthy and efficient --Adjust the laptop to the most comfortable position, helping reduce strain on your neck and shoulder, organize your workspace and improve your work efficiency.

User questions & answers

Question:	Is it possible to buy an additional arm? I love the laptop on it and now want to add a monitor to the setup
Answer:	Yes, it supports to purchase additional arm. Please contact us via email [email protected]
Question:	What is the diameter of the vertical pole
Answer:	It's 1.45"(3.7cm).
Question:	What’s the height of the laptop if at the tallest setting on the stand
Answer:	About 16.5"
Question:	Hi, do viozon sell separate phone holder arm and separate monitor arm
Answer:	They do have a Monitor arm, I believe. I don't know about the "phone holder though. You may want to try the "Magic Hold" system, though.

Product features

HIGHLY COMPATIBILITY WITH C CLAMP

1.The thickness range of the table using the standard c clamp mounting method is 0.6 "-2.36".

2.If your desktop is thicker than 2.36 ", you can modify the hole position of the clip , the maximum MATCH desktop thickness under 2.76 "

3.Edge vertical deep should be more deeper from inside clamp to outside clamp than 3.15''

Two installation methods

Multi-range clip-on type: requires a desk with a standard thickness of (0.6"-2.36")1.5cm-6cm

Hole type: requires a hole diameter ≥ (2.36")6cm

Cable Management

the concealed cable system collects the wires in the slide cover of arm keep the desk and cables neat and organized

Quick VESA

Quick Release VESA plate makes monitor installation and removal fast and easy

High-quality laptop plate

Our laptop plate design is all about fashion and modernity

The overall notebook board is the best aluminum alloy material in the world

Flexible adjustable laptop holder are great for grabbing your laptop.

• Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 12.1 inches or less. This mount can be used on flat ceiling.
• High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 30 lbs (13.6kg).
• Full Motion Adjustable Mount: Our projector ceiling mount can tilt 25 degrees up and down, swivels 90 degree from left to right and 360 degrees rotation, hitting all possible viewing angles. The mount provides a 43.6-inch extension and collapses to 23-inch from the ceiling using the extendable arm and 8.9-inch without the arm.
• Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts.
• Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands.

User questions & answers

Question:	Will this extend 18-20 inches
Answer:	Yes, it works on my WIN10 as well.
Question:	Will this mount work for the Azues RD 822 video projector on a sloped ceiling
Answer:	It is on the sheet and I had to use a magnifying glass to read, but the pamphlet info gave me perfect working instructions.
Question:	Does this work with epson pro g6050w
Answer:	I don't know if it will work on that. The best way to see is place the order and try it. It is simple to download. If it doesn't, Amazon is very good about refunding, replacing or letting you order another...I can speak from experience. The first 0ne I received said 'FILE CORRUPT AND UNREADABLE". I received the replacement a day later (same day I shipped the other unit back) and it worked perfect. Good luck!
Question:	Will this work on an epson
Answer:	Hi - I also have a Surface with no CD drive. But what I found so curious is that there was a label on my CD packing saying "no software driver needed" or something like that. I hoped the cable would let me connect to an old projector with a VGA connector. But no matter what I did, I kept getting a "no signal" message on my laptop when trying to display a presentation on the projector. I did not search for any kind of driver online, because some other buyers of this cable did that and whatever they installed hosed their laptops. I ended up just using a different projector.

Product features

Maximum Load Capacity

30lbs (13.6kg)

Universally Compatible

• concrete
• drywall

Distance between Holes on Back

Compatible with projectors with distance between the mounting holes on back 6-12.1 inches

Adjustable Height

The mount provides a 23-inch to 43.6-inch extension and collapses to 8.9-inches from the ceiling

Step 1

Mount the Ceiling Plate

Step 2

Attach the Projector to the Mount

Step 3

Assemble the Mount

Warm Tip

To prevent the mount from shaking,please tighten the screws marked in the picture above

Product description

QualGear PRO-AV QG-KIT-TA-3IN-B projector mounting kit includes a professional grade QG-PRO-PM-50-B projector mount, QG-PRO-PM-TCA-B truss ceiling adapter, and a QG-PRO-PM-3IN-B 3 inch 1.5-inch NPT threaded pipe in black. Easy installation with color installation manual and presorted hardware. Compatible with 1.5-inch NPT threaded pipe and suitable for mounting to round, square, or rectangular trusses up to 3" wide and 3.5" high. For details about each component of this mounting kit, please look up their model number.

• Suitable for truss ceilings
• 1. 5" Npt thread compatible
• Color installation manual
• Professional quality
• 5 Year limited

User questions & answers

Question:	Will this work with epson 2150 home cinema
Answer:
Question:	Can i mount a nec px750u projector with this bracket
Answer:
Question:	Does this work with a Mitsubishi xd3200u model projector
Answer:
Question:	Can i turn this over and mount it on top of speaker stand pipe
Answer:

Product features

Flat Ceilings

The following models support flat ceilings and installing to wood beams, concrete slabs, and metal beams. They are available in two colors as follows. White: QG-KIT-CA-3IN-W. Black: QG-KIT-CA-3IN-B.

Cathedral / Vaulted / Sloped Ceilings

The following models support angled ceilings and installing to wood beams, concrete slab, and metal beams. They are available in two colors as follows. White: QG-KIT-VA-3IN-W, Black: QG-KIT-VA-3IN-B.

Drop / Suspended Ceilings

The following models support suspended ceilings and installing via steel wire. They are available in White color and two ceiling tile configurations as follows. 2' x 2' Tile: QG-KIT-S2-3IN-W. 6" x 2' Tile: QG-KIT-S-3IN-W.

Truss

The following model supports installing to truss beams. It is available in Black color as follows. Black: QG-KIT-TA-3IN-B.

• This cast aluminum projector mount adds versatility and simplicity to mounting a projector to a ceiling
• The adjustable mounting arms adapt to projectors allowing for flexible installation
• Tilt: Yes

User questions & answers

Question:	Does this mount come with M6 x 4 screws to attach them to the projector
Answer:	Yes.M6 screws are among the assortment of screws supplied: M3,M4,M5,M6For M6, two sets of sizes are provided:M6x16 screw (x4)M6x40 screw (x4)Please make sure you use the correct length screw as specified by your projector manufacturer. If in doubt, please check your projector manual or contact the manufacturer directly.
Question:	No where in the instructions show that it can only be mounted on a wall, the prod images show it can, so can this be mounted on a wall
Answer:	I can definitely be mounted on a wall. You simply set it up that way, then tighten the bolts. That is they way I use mine and it works perfectly. Just be aware that you must have a small or normal size projector, as a giant projector would not work.
Question:	Can you mount this to a wall making an L shape? How much room is there from the mounting plate to the angle joint
Answer:	I mounted my Benq HT2050 projector to the wall this way and an even larger projector could be mounted this way. The arms allow you quite a lot of flexibility, so you could extend them into the room quite a ways, although a heavy projector might tip a bit, which you can adjust for.
Question:	Do you need a wall stud to mount this
Answer:	I screwed the base of my mount to a stud. I located the studs by attaching a string to a refrigerator magnet and dragging it across the wall at various heights until I found the studs.

Product features

Universal Design

Its unique design, array of drop extensions, and cable management allow the mount to adapt to almost any installation.

Small projectors - use 3 arms instead of 4 provided If mounting points are smaller than universal spider, simply rotate the arm(s) under the universal spider plate.

Large projectors - use 4 arms provided Simply rotate the arms to suit.

Very Large projectors (with mounting points over 12 inches apart) - use the optional extension arms (AMRP10057) to extend the arms from 12 inches up to 15.7 inch reach.

High Quality Engineered

Featuring a reinforced steel plate and cast aluminum mounting head, this lightweight mount can support projectors up to 30 lbs. Its cast aluminum construction provides a strong, lightweight, heat-dissipating platform that is perfectly suited for mounting any A-V projector in a suspended ceiling.

Cable Management

Easy management to ensure that all cables are tucked away for an aesthetic appeal.

Tools and Fitment

No need to buy extra parts in order to mount your projector! All screws, washers, tools are included in order to ensure perfect fitment.

Flexible Alignment

180° pitch & yaw, 360° rotation with lock-down for perfect A-V projector alignment.

Optional Pole Adjust

Choose from any extension tube or combination that's right for you. Available in white, silver, and black color variations:

AMRE5003(B) 3" extension

AMRE5006(B) 6" extension

AMRE5012(B) 12" extension

AMRE5024(B) 24" extension

AMRE5048(B) 48" extension

AMREADJ1626(S)(B) 16-26" adjustable extension pole

Tubes allow internal cable management and can be combined to form lengths. eg. 6 inch +12 inch = 18 inch tube.

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

Product description

This DYNAVISTA universal ceiling mount features 4 adjustable swing arms and  each arm has two sections designed to adapt to a variety of mounting patterns. It mounts the projector within 5" (128mm) away from the ceiling and includes support for 360 degrees of rotation, as well as 15 degrees of 4 directions tilt and roll adjustment. It is constructed of steel and can support up to 33 lbs. (15 kg). Hardware for mounting to on wooden or concrete ceiling is included.

 

Features and Specification

• Compatible with projectors with distance between the mounting holes on back 14inches or less
• Maximum load capacity: 33 (15kg)
• Made of premium high quality and heavy duty steel
• Full motion and adjustable projector mount with 360°rotation, hitting all viewing angles.
• Low-Profile design with 5 inch away from the ceiling
• Adjustable tilting Bracket 15° left and right , 15° front and rear
• Easy to install: features quick release hooks that detach and attach by loosening and tightening mounting bolts
• Compatible with BenQ, Epson, Acer,Optoma, Sony, Video, Dell and other popular brands.
• Product weight: 3.15 (1.4kg)
• Color：Black

 

Note: The mounting arms for this projector mount have a maximum reach of 14”. Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 14 inches or less then this mount will fit your projector. We are online for you 24/7, do not hesitate to contact us regarding any issue related to this product.

• Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 13.4 inches or less. This mount can be used on flat and sloped up to 55°ceiling.
• High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 33 lbs. (15kg).
• Adjustable Full Motion Mount: Our projector ceiling mount can tilt 15 degrees from left to right, tilt 15 degrees from front to back and 360 degrees rotation, hitting all possible viewing angles. Holds projector at 5 inch from the flat ceiling.
• Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts.
• Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands.

User questions & answers

Question:	What is the size of ceiling mounting plate? I am attaching this to a beam of a limited width
Answer:	I will work on 2 monitors for sure I am running on Mojave I dought that big Sur is different This is the only adapter that works to be honest I have tried many and all with problems Buy with confidence
Question:	is this compatible with the epson
Answer:	This device connects via USB port.
Question:	Can this be mounted upside down? Im installing on a shelf and need the mount for angle adjust purposes
Answer:	This device connects via USB port.
Question:	Does this work with Optoma projector? Do I need to buy screws
Answer:	You need something like a kvm switch. This is for taking a single signal and putting it on multiple monitors. For multiple signals on one monitor, find a display switch or hub

• Universal Projector Extension Arms (extend projector mounting up to 15.7")
• Use with AMRP100 Universal Projector Mount (AMRP10057 to go past 12")
• 4 extension arms included
• Cast Aluminum construction provides strength with less weight
• White

User questions & answers

Question:	Will this work with epson 4010 if these longer arms are added to the ceiling mount
Answer:	Yes, I have mine mounted to a wall. Screw driver will work with strong wrists as you should screw into a stud for solid support. I pre-drilled pilot holes for screws.

Product features

Comes with

Comes with 4 steel extension arms for your AMRP100. 

Universal arm

Adjustable arms for universal projector mounting application.

Product description

PyleHome Model : PRJWM8

Universal Projector Wall Mount

Universal Projector Holder Wall Mount with Telescoping Length, Angle and Tilt Adjustment

Universal Mounting Patterns

Compatible with Virtually All Projectors

Securely Holds Devices up to 44 lbs. (20kg)

Telescoping Length Adjustment

Length Mounting Arm Extends from Wall: 16.9'' – 25.6'' inches

Safely Conceals and Protects Cables for a Clean Installation

Perfect for the Home, Office or Classroom

Horizontal, Vertical (Angle and Tilt) Adjustments

Durable and Polished Mounting Assembly Kit

Does not Interfere with Ventilation or Cooling Fans

Provides Safe, Durable & Reliable Projector Mounting

Includes All Necessary Mounting Hardware and Brackets

Quickly mount your projector with ease. The Pyle PRJWM8 Universal Projector Wall Mount comes with everything you need to place your projector exactly where you need it. Achieve a wide range of projecting angles with versatile pitch and roll adjustments. Adjustable bracket with telescoping length extends from the wall so you can mount your projector in more convenient and desired locations. The frame arm of the mount is hollow to allow for the concealment of any wires and cables. Ensure safety and optimal performance when you properly mount your device. The PRJWM8 Projector Wall Mount kit is perfect for any home, office or classroom and includes all necessary mounting hardware and brackets.

• FITS PERFECTLY: This projector wall mount bracket by Pyle Home is compatible with virtually any standard projectors on the market. Its retractable telescopic arm extends from wall by 16.9" – 25.6" inches. Ideal for home or office use
• UNIVERSAL MOUNT: The projector holder was designed to be universally mounted on any flat wall surface and the unique mounting mechanism allows horizontal, vertical (angle and tilt) adjustments. Perfect for home movie theater / video film showing
• STABLE AND STURDY: Can securely support projectors weighing up to 44 lbs. (20kg) and comes with heavy duty and reliable polished mounting assembly kit that you can easily install within minutes and can last through numerous uses and applications
• ADJUSTABLE PITCH / ROLL: The product features rotation and tilt adjustments, and pitch and roll adjustment of -/+ 20 degrees so you can set the viewing angle / position to the center of the screen and ensure safety and optimal performance
• CABLE CONCEALMENT: The frame of the mount is hollow for easy concealment of any wires or cables so you can keep them out of sight for a clean set up and it does not block air flow or cooling vents to keep your projector from overheating

User questions & answers

Question:	How would I mount this in drywall
Answer:	I have the Epson 1060 projector. It works perfectly on mine. As long as your projector has 3 mounting holes to screw in the bolts, you’ll be fine, more holes the better. You can move the arms to go anywhere you need them to and they also extend. I googled your projector. It’ll be fine.
Question:	Is this compatible with a VESA 400 x 400 bracket
Answer:	No, but the mount is very adjustable/flexible in changing positions. It is well built, sturdy, and the hardware is very good quality. I locked my projector into position a couple of years ago and have not had to make a single adjustment to it since.
Question:	I have a small projector (Olympia Digital X8800), is it too small
Answer:	This mount is extremely sturdy when all fixture points are tightened down with the provided allen wrench. The bolts are all finely machined/hardened bolts and have never stripped after setting up and removing my original projector several times. (one warranty replacement, and two bulbs over 10 years, and now installing a new updated projector just a few months ago.) This mount is so versatile, that my new BENQ HT 2050a went up with minimal adjustments.
Question:	how close can I get it to the wall? room is just big enough to get 120in if center projector is no more then 12in
Answer:	Works with my Optoma hd66 very adjustable

Product description

The adjustable mount for short throw projectors helps you create a large image from a short distance and keeps your projector out of the way. It’s ideal for classrooms, boardrooms, hospitality venues, and many other meeting spaces. Wide Compatibility with Short Throw Projectors Supporting a wide range of projector brands, the short throw projector wall mount kit features a universal mounting pattern of 12. 8" (325 mm) diameter and supports a weight capacity of 33. 3 lb. (15 kg). Adjust the Distance from the Wall Adjust the distance of your projector from the wall using the telescopic arm, which extends from 16. 5” to 27. 7” (420 mm to 705 mm). The arm on the low-profile projector wall mount also tilts +5/- 5 degrees to help you find the ideal position. The lockable ball joint on the adjustable projector mount provides 360-degree swivel, +/- 25 degree horizontal / vertical tilt. Reliability PROJWALLMNT is backed by a StarTech 2-year and free, lifetime technical support.

• UNIVERSAL PROJECTOR WALL MOUNT: Supports short throw & ultra-short throw projectors w/ mounting hole pattern ranging up to 12.8" (325mm) in diameter; supports projectors up to 33.1lb (15kg)
• ADJUSTABLE PROJECTOR MOUNT: Supports both short and ultra short throw projectors; The arm allows you to position a projector between 16.5" & 27.7" from the wall (w/ incl tools) to adjust throw ratio
• PRECISE ADJUSTABILITY: Easily optimize projector placement with 3 color coded dials for +/-10° swivel, +/-5° tilt (pitch), +/-10° rotate (roll); +/-20mm lateral shift; Secure adjustment w/ incl wrench
• BRAND COMPATIBILITY: Projector wall mount compatible w/ projectors from brands like BenQ, Acer, Optoma, Eiki, Hitachi, Sanyo, NEC, Epson, Sony, LG & Dell among others (several screw sizes incl)
• THOUGHTFUL DESIGN: Heavy duty steel & aluminum construction, this wall projector mount/holder kit supports in-wall cable routing & integrated cable management; Includes decorative snap-on covers

User questions & answers

Question:	What is the width and length of the wall mounting plate
Answer:	I was not able to mouth the two i purchesed with out pulling out my grinder and cresting groves so it would hold at an angle, and by jerry rigging parts from an old mount to get it to fit on the four holes of the bottom of the projector. Dont buy unless your projector is very small.
Question:	Will this projector mount projwallmnt hold an epson 5040ub which is not a ultra or short throw
Answer:	it has adjustable legs that will fit the projector....It comes with all screws to fit on to your projector....my projector had different screws to mount to....check screws first....some screws are SAE and others are metric....also length of screws....make sure they are not too long...may damage internals !! best of luck

Product features

Wide Compatibility with Short Throw Projectors

Supporting a wide range of projector brands, the short throw projector wall mount features a universal mounting pattern of 12.8" (325 mm) diameter and supports a weight capacity of 33.3 lb. (15 kg).

Adjust the Distance from the Wall

Adjust the distance of your projector from the wall using the telescopic arm, which extends from 16.5” to 27.7” (420 mm to 705 mm).

The arm on the low-profile projector wall mount also tilts +5/- 5 degrees to help you find the ideal position.

The lockable ball joint on the adjustable projector mount provides 360-degree swivel, +/- 25 degree horizontal / vertical tilt.

For the IT Pro Since 1985

StarTech.com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to IT Professionals.

Product description

WM210AUS Features: -Includes short throw arm and RSMAUS Universal Mini RPA Elite projector mount). -Now includes new universal interface to further reduce installation time. -Fast installation with innovative quick-connect system. -Industry-first micro height and leveling adjustment. Mount Type: -Wall mount. Finish: -Silver. Cable Management: -Yes. Weight Capacity: -25 Pounds. Generic Dimensions: -11.5'' H x 19.6'' W x 23.1'' D. Dimensions: Overall Height - Top to Bottom: -11.5 Inches. Overall Width - Side to Side: -19.6 Inches. Overall Depth - Front to Back: -23.1 Inches.

• Compatibility: Projector
• Product Type: Mounting Arm

Product description

"This unique stand includes two universal holders: one for your pico projector and the other for your phone. Alternatively, it may also be used with two phones for videos, tutorials, or live stream video. PRIMARY USE: Pico Projectors (sold separately by third-party sellers ) are commonly used in the cookie decorating community. Unfortunately, the stands that come with them are usually too short, and are very flimsy. Arkon's Cookie Decorators Mount is different. It's a stand that is height-adjustable up to 43"" tall, allowing you to position your projector at the perfect height every time you use it. Many cookie decorators want to use a pico projector and also be able to use their mobile phone to record cookie decorating videos. This functionality is easy with the Cookie Decorators Mount. Insert your phone into the holder clamped onto the pole/post of the stand and tilt it downward to capture the action. For most pico projectors, the phone holder on the top arm assembly is the best way to grip your projector (those less than 3.9"" wide). However, the Cookie Decorators Mount also includes a camera adapter with standard 1/4""-20 threaded pattern, which is found on all pico projectors, digital video recorders, and cameras. SECONDARY USE: If you own two phones, you can be filming front-facing or overhead view videos with the phone holder on the top arm assembly. If in the overhead view position, you'll be able to use your phone mounted to the pole/shaft position to view the comments or your hand movements in a Facebook or Instagram live. Using two phones is also a great way to capture more than one camera angle for your videos. Both phone holders securely fit phones up to 3.9” wide, including Apple iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, Samsung Galaxy Note 20 and Note 10, Galaxy S20, S10, and S9, and LG G6, G5, and G4."

• Holds a pico projector and phone up to 3.9" wide
• Includes 1/4"-20 camera adapter for some pico projectors, digital camcorders, or cameras
• Phone clamp holder can attach to pole/post or top arm assembly
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	Will this work work optoma mini projector
Answer:	There are different models of the Optoma projector. Please contact ARKON customer service directly with that device model number and we can double check for you. This kit comes with a 1/4 20 connection as well so it can thread onto the 1/4 20 on most projectors.

Product features

Use with Two Phones

With two phones, film front-facing or overhead view videos with the phone holder mounted to the adjustable overhead arm. In the overhead view position, use your phone mounted to the pole/shaft position to view comments or your hand movements on Facebook or Instagram Live.

Use with Pico Projector and Phone

Many cookie decorators want to use a pico projector for decorating and also be able to use their mobile phone for recording cookie decorating videos. Most pico projectors (those less than 3.9" wide) can be mounted to the phone holder on the adjustable overhead arm. Insert your phone into the holder clamped onto the pole/post of the stand and tilt it downward to capture the action.

Extend Stand for Eye-Level Views

Extend the height adjustable floor mount stand for Facebook or Instagram Lives. The adjustable overhead arm straightens to create a stand measuring up to 41" tall for front-facing views.

With the telescoping pole lowered to its lowest position and the adjustable overhead arm straightened, the stand measures 31 inches tall.

Trace Cookies and Cakes with Your Pico

Mount your pico/mini projector and project images onto your cookies or cakes for a professional decorated look. The stand's adjustable overhead arm bends down to 8.5 inches, allowing you to position your projector at the perfect height to provide a clear projection image for tracing cookies or cakes.