11 best rubber wire cover

Product description

The Power Gear Cord Cover organizes your cords across open areas. The rounded surface helps prevent tripping. Secures easily to most surfaces by using the double-sided tape (included).

From the Manufacturer

Organizes cords across open areas

• SAFETY: Run HDMI cables, power strips, surge protectors, and other cords across open floors, countertops, or walls without the hazard of tripping or damage of cables
• LOW PROFILE: Rounded surface provides a seamless solution for concealing cables, extension cords and wires without snags and allows wheels to easily roll over cover
• EASY INSTALLATION: Avoid unnecessary cutting with the pre-split channel on bottom of cord cover, secures easily to most surfaces using double-sided tape (included)
• PERFECT SIZE: This cord cover comes 6 feet long and 2-1/2 inches wide, but can be cut to accommodate shorter distances, ensuring a perfect fit for any home or work space
• DURABLE: PVC material is flexible, yet strong, perfect for open areas that encounter lots of traffic, such as event venues or warehouses

User questions & answers

Question:	Can this be used under a carpet
Answer:	Yes, I believe it will. I hide two thick extension cords very well.
Question:	Has anyone tried flatenning this with a hair dryer
Answer:	This floor cable protector is made in the USA from a highly flexible, abrasion resistant PVC that effectively uncoils to lay flat.
Question:	how many cords can this cover and does it work with sound equipment? i have loss cords at my church i'm trying to organize
Answer:	Many thanks for your interest in D-Line Floor Cord Cover, they are made from a flexible material which simply uncoils to lay flat (with no need for adhesive tapes). If you would like to secure with double sided tape you can, but it's not essential. Should you have any further questions please let me know, D-Line
Question:	I bought a similar product and when it got to me I found it had chemicals in it known to the state of California to cause cancer; does this product
Answer:	Yes. I have a thick yellow cord from a heavy duty outlet strip going though it.

Product features

Cordinate, Black, 6 Ft Floor Cord Cover

• Safety – Run HDMI cables, power strips, surge protectors, and other cords across open floors, countertops or walls without the hazard of tripping or damaging cables.
• Low Profile – Rounded surface provides a seamless solution for concealing cables, extension cords and wires without snags and allows wheels to easily roll over cover. Gray color blends in with decor and won’t draw attention.
• Easy Installation – Avoid unnecessary cutting with the pre-split channel on bottom of cord cover, secures easily to most surfaces using double-sided tape (included).
• Perfect Size – Extra-long 6ft. length but can be cut to accommodate shorter distances, and slim 2.5in. width ensures a perfect fit for any home or workspace.
• Durable – PVC material is flexible, yet strong, perfect for open areas that encounter lots of traffic, such as event venues or warehouses.

Cordinate Floor Cord

The Cordinate Floor Cord Cover is designed with safety and performance in mind. While most floor cord covers create an unsightly obstacle, this unit’s tapered design, narrow width and 6ft. length provide a discreet, low-profile appearance that reduces the chance of tripping while not being obstructive. The gray finish ensures that this floor cord cover will blend in seamlessly with the existing decor of any home, business, office, event space, warehouse or classroom.

The durable covers are made from a resilient PVC material that is engineered to provide safety and security and can be easily cut to any desired length. This all-in-one package also includes double-sided tape to make your installation quick and easy. Simply slide wires, cables and cords into the pre-slit bottom of the unit and secure to the desired surface. With the Cordinate Floor Cord Cover, you no longer have to choose between style and function.

Product description

Wiremold Corduct Cord Protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape (included with product). Organize and hide cords and cables easily.

Product Details:

Color: Ivory

Length: 15 Feet (180 Inches)

Card opening Size: 2 ½” L x 7/16” H x 1/2” W

Electrical Product Type: Raceway Cord Cover

Material: Rubber

Application Location: Over floor

SIMPLE AND EASY 4 STEPS INSTALLATION:

Step1: Cut strip to desired length.

Step2:  Insert the cord

Step3:   Use tweezers to peel one side of the tape and apply to bottom of corduct.

Step4: Peel opposite of the tap and fix the corduct on the floor.

WHAT IS IN THE BOX:

1 X 15 Feet Wiremold CDI-15Corduct Overfloor Cord Protector

1 X Double Sided Tap

From the Manufacturer

Wiremold CDI15 Corduct On-Floor Cord Protector conceals wires and cords. Creates a smooth, trip-free surface instantly. Applies to any flooring surface with pressure-sensitive tape.

• Connector type: Coaxial

User questions & answers

Question:	Is this okay for outdoor use
Answer:	Hi,my dear friend, Thank you for your contacting and sorry for keeping you waiting. This is not a non-stick pan, but an ordinary titanium pan. Below is the link to the only non-stick pan in our shop. http://www.amazon.com/dp/B08M9X1H17?ref=myi_title_dp Hope it can help you. Have a nice day. Best regards,
Question:	How wide is it
Answer:	no it is not
Question:	Hi out there, Is this item length 5 ft or 15 ft. Very confused. Thanks
Answer:	Yes.
Question:	Does this come in a different width? I have this 5-part component cable that is over an inch wide
Answer:	Aside from its aesthetic purposes, it also makes the Titanium Pry Bar lightweight. The circles are there for added grip.
Question:	Does it come with double sided carpet tape
Answer:	You can clip it to a lanyard, just like a pen.
Question:	what is the shipping dimension of this for 10ft? is this rolled or delivered unrolled
Answer:	No. There's really nothing to grab on to,and it seems to be solidly attached.
Question:	Will a cable coax cable and extension cord fit inside the main channel
Answer:	No it's made in the USA AZ
Question:	Can the cord be cut to fit the length I need
Answer:	Good enough. I noticed the stitching started to give out on the second use. I will probablt super glue the stitching...

Product features

Electriduct D Series Rubber Duct Cord Protector

Strong enough to handle vehicular traffic, the D series rubber cord protector shields wires, power cord(s), and CAT6 (Ethernet) cable(s) making this a must for any standard computer station set-up.

The D-2 series rubber duct comes in three different colors (Black, Grey and Brown) and is available in 5-foot and 10-foot lengths that can be cut to fit and match any work area.

Easy Installation

Easily cuts to any length with a scissors or utility knife. Applies to any flooring surface with pressure-sensitive tape (included with product).

Applications

Ideal for offices, living rooms, exercise rooms, or anywhere else cords are laying out in the open. Can be use for permanent or temporary applications.

Color Options

Rubber duct floor cord cover is available in four different colors: brown, ivory, black and gray.

Multiple Lengths

Available in 5 foot, 15 foot, and 50 foot lengths to suit any need.

Dimensions

Overall dimensions accommodate any standard cord: 2 1/2" W x 7/16" H x 1/2" W cord opening.

Flexible Design

Low profile, flexible design conforms to any flooring surface including carpet, tile, and hardwood.

Product description

Wiremold Corduct Cord Protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape (included with product). Organize and hide cords and cables easily.

Product Details:

Color: Gray

Length: 5 Feet

Card opening Size: 7.1" L x 7.2" H x 3" W

Electrical Product Type: Raceway Cord Cover

Material: Rubber

Application Location: Over floor

SIMPLE AND EASY 4 STEPS INSTALLATION:

Step1: Cut strip to the desired length.

Step2: Insert the cord

Step3: Use tweezers to peel one side of the tape and apply to bottom of corduct.

Step4: Peel opposite of the tap and fix the corduct on the floor.

WHAT IS IN THE BOX:

1 X 5 Feet Wiremold CDG-5 Corduct Overfloor Cord Protector

1 X Double Sided Tap

• Conceals cabling and cords while creating a smooth, trip-free surface.
• Conceals wires and cords: creates a smooth, trip-free surface.
• Applies to any flooring surface: pressure sensitive tap included with product.
• Cuts to any length: with scissors or utility knife.

User questions & answers

Question:	can you use this outside on concrete
Answer:	I believe it can be washed in a machine based on the material (just a guess), but since the other side is velcro, I highly recommend washing it by itself. I don't know about the dirty, I would get a darker color if you're worried about that. So far mine has stayed pretty clean and I and my pets walk on it daily. I also got a light tan color.
Question:	Can it be used on a textured wall
Answer:	I believe that it would be. It is 2 1/1 inches wide and approximately 1/2 inch in height. Underneath there is a slit down the center so you can put the cord up into the cover. This allows the cord protector to set flat on the floor. Hope this is helpful for you.
Question:	Will this work good outdoors to hold down an extension cord over a walkway
Answer:	Yes I believe so
Question:	How long does it take to flatten with the adhesive
Answer:	My roomba has no problem going over it

Product features

Easy Installation

Easily cuts to any length with a scissors or utility knife. Applies to any flooring surface with pressure-sensitive tape (included with product).

Applications

Ideal for offices, living rooms, exercise rooms, or anywhere else cords are laying out in the open. Can be use for permanent or temporary applications.

Color Options

Rubber duct floor cord cover is available in four different colors: brown, ivory, black and gray.

Multiple Lengths

Available in 5 foot, 15 foot, and 50 foot lengths to suit any need.

Dimensions

Overall dimensions accommodate any standard cord: 2 1/2" W x 7/16" H x 1/2" W cord opening.

Flexible Design

Low profile, flexible design conforms to any flooring surface including carpet, tile, and hardwood.

• 3 PACK CABLE PROTECTOR RAMP - Overall Dimensions: 40"x10"x2"; Channel Dimensions: 1.18" x 1.38"
• DURABLE & STURDY - Cable Protector Ramp Load Capacity: 11000lbs/axle. Made of industrial-grade rubber, durable & sturdy. Cuttable easily for different use.
• EASY CABLE MANAGEMENT - Non-Slip pre-split unique membrane rubber base makes it quick and easy to add or remove cables.
• WIDE APPLICATION - This heavy duty cable ramp is ideal for parking lots, warehouse, concerts, hotels, stages, shopping mall, sports events, school, community, construction places etc.
• SUPERIOR WIRE PROTECTION - Efficiently provides superior protection for extension cords, power lines, hose & network cables. The cable concealer is ideal for indoor and outdoor use

User questions & answers

Question:	bought the 3 pack but need a single one to finish my project. are they sold individually
Answer:	If the material is not to dense, eg steel, I would think these would be great.
Question:	Can i buy only one
Answer:	Yes, if you need to you can cut off the solid shoulder to length. Then grind a flat spot on that area for the set screw to sit.
Question:	How easy is it to add/remove wires? Is this something I could do easily daily
Answer:	The bits vary in length depending on the size of the bit. The smallest bit, 3/64”, is 13/4 ( one and three fourths inches long. The largest bits, 1/8” is 23/4 inches long.
Question:	Need 4' lengths at least? Can anyone suggest a product
Answer:	I don’t think so, I mostly use it on wood, and the merchant says it works best for wood, plastic and some other soft metals.

Product features

Heavy Duty Load Capacity

Extra rugged construction with impressive 11,000 lbs per axle load capacity. Made with heavy duty commercial grade thermoplastic rubber, it keeps wires from getting damaged by foot traffic and vehicles present in a busy work environment.

User-friendly Design

Dual 1.25"W x 1.25"H channels are accessible by a flip up PVC lid and designed to protect a variety of cables size up to 1.2" diameter, allowing the user total flexibility to locate and fix any loose cable regardless of direction. Simply "snap" open and push in.

Effortless Connection

Unique modular design makes it easy to connect multiple ramps together for spanning larger lengths of cable. Simple operation makes it suitable for both commercial and domestic use. Neat and unobtrusive when rolled out across the floor.

Designed for Safety

Bright yellow lid, highly visible both at day and night, preventing unnecessary accidents in advance. This cable protector also has a low smoke, non toxic and a low fume emission level and will not release harmful chlorine gases under overheating environment.

Bottom Adsorption Stability

The base owns strong stability and adheres the ground firmly, eliminating concerns about bulging hose lines, pinching electrical wires and crushing cabling in high traffic work areas. Stylish sloping edges for easy passage of trollies, carts and wheelchairs.

Wide Application

Perfect for power cords, network cables, etc. Particularly suitable in public places including playgrounds, venues, sporting events, exhibition halls, retail premises, squares, temporary emergency applications as well as home and office usage.

2-SLOT CABLE COVER PROTECTOR RAMPS

Dual channel cable protector ramp designed to protect and secure cables, prevent accidents by hiding trip hazard cables trailing across floors with a trim, low profile design.

Smooth, clean and odourless finish which is abrasion resistant and will not discolour from sunlight. Snap fit cable protectors are ideal for carrying one or more cables in many combinations depending on application, allowing the user total flexibility to locate and fix any loose cable regardless of direction.

Product description

Features:



- 1-Channel Cable Protector - This 39"x10"x3" 1-Channel Wire Cover Ramp is designed to cover & store cables, electric wires, hose & cords for full protection from being run over by car & water damages, which is ideal for parking lot, warehouse, hotel, stage, construction places, etc.

- Durable & Sturdy - Made of solid PVC and rubber with strong compression resistance, features 66000 Lbs (30 t) large load-bearing capacity for even heavy equipment vehicle pass; Premium insulation from moisture and oil

- High Visibility & Safety - Comes with bright yellow lid on the top for greater visibility and safety warning symbol, allow pedestrians & drivers to easily see the ramp and reduce the risk of accidental tripping; Provides insulation against electric currents even when wires are damaged

- Anti-Slip & Easy to Use - Features anti-slip dot grid patterns on the top of lid and both side of ramp for increased traction and reduced water accumulation on the surface, prevent slips and damages to cables and cords; Hinged lid allows for easy loading of cables

- One Piece Design & Easy Installation - Modular design allows multiple ramps to be connected together, meeting different flooring demands for extended coverage; Easy to install by fastening nails into the floor (Notice: Nails are Not Included)



Specifications:



- Overall Dimension(LxWxH): 39 3/8" x 10 1/4" x 2 3/4" (100 x 26 x 7 cm)

- Channel Size(WxH): 2 3/4" x 1 15/16" (7 x 5 cm)

- Lid Width: 3/16" (4 mm)

- Load Bearing Capacity: 44092 to 66139 Lbs (20 to 30 t)

- Material: PVC, Rubber

- Net Weight: 14.3 Lbs (6.5 kg)



Package Contents:



- 1x 1-Channel Wire Cover Ramp



Notice:

- Like all rubber made products, sometimes an out gassing odor may be present since these units are brand new. This odor will dissipate in time (few days to a few weeks). We recommend you air them outdoors before placing them indoors.

• [1-Channel Cable Protector]: This 39"x10"x3" 1-Channel Wire Cover Ramp is designed to cover & store cables, electric wires, hose & cords for full protection from being run over by car & water damages, which is ideal for parking lot, warehouse, hotel, stage, shopping mall, construction places, etc.
• [Durable & Sturdy]: Made of solid PVC and rubber with strong compression resistance, features 66000 Lbs (30 t) large load-bearing capacity for even heavy equipment vehicle pass; Premium insulation from moisture and oil
• [High Visibility & Safety]: Comes with bright yellow lid on the top for greater visibility and safety warning symbol, allow pedestrians & drivers to easily see the ramp and reduce the risk of accidental tripping; Provides insulation against electric currents even when wires are damaged
• [Anti-Slip & Easy to Use]: Features anti-slip dot grid patterns on the top of lid and both side of ramp for increased traction and reduced water accumulation on the surface, prevent slips and damages to cables and cords; Hinged lid allows for easy loading of cables
• [One Piece Design & Easy Installation]: Modular design allows multiple ramps to be connected together, meeting different flooring demands for extended coverage; Easy to install by fastening nails into the floor (Notice: Nails are Not Included)

User questions & answers

Question:	I need a “whip” on my spa. Will this fit that type of electrical cord? It’s pretty thick
Answer:	Yes, I used them recently in my 1/2 inch drill driver and they work very well.
Question:	Do I need 2 to cover the width of a car? or do I saw this in halves
Answer:	This set of drills require a drill chuck so unless you have small drill chuck adapter the answer is no. The chuck of the tool your asking about is six sided 1-4” shaft female
Question:	Can this stay outside 24/7? Or will it rot from weather
Answer:	They are designed to drill through metal. This bit set is perfect for drilling into wood, metal and plastic. Titanium coating reduces friction and increases drilling speed in metal.
Question:	Looking to use for a 50 amp power cord across an alleyway. Trucks, including garbage trucks drive through this, would this protect the power cord
Answer:	AR2074G speed plus is the one you should buy. It has a replacement drill bit holder to put on your drill. The other set you are asking about does not have this and the drill bits would not fit the one that came with my Ryobi drill.

• CABLE PROTECTOR RAMP: Cable Ramp Size (Each): 38.9" x 5.8" x 1.18"; Material: Rubber + PVC; Load Capacity: 18000LBS; Channel: 1; Channel Duct Size: 0.59" x 0.39"
• DURABLE & STURDY: Large capacity up to 18,000LBS for heavy vehicle pass. Cable ramp cover made of industrial-grade rubber, durable & sturdy. Cuttable easily for different use
• SUPERIOR WIRE PROTECTION: Efficiently provides superior protection for extension cords, power lines, hose & network cables. This heavy duty cable ramp is ideal for car parking lots, warehouse, concerts, hotels, stages, shopping mall, sports events, school, community, construction places etc
• SAFETY & VISIBILITY: At the top of rubber cable protector has safety yellow hinged strap on the top, provides greater visibility, guarantee the vehicle pass more safely (Note: yellow stripes are non-reflective)
• ANTI-SLIP & EASILY USE: Texture on the bottom prevents sliding on smooth floors,no assembly needed, ready to use

User questions & answers

Question:	Is the bottom smooth
Answer:	3/16" and up are flat shank, the smaller are round shank.
Question:	How do you attach to concrete
Answer:	It means that it starts to drill right away and you don't have to worry about it moving on you. As long as the drill is being held in a straight position it won't walk on the surface you are trying to drill through.
Question:	How can I a fix this to my driveway without using drill and heavy artillery? Is there some type of glue that would work with the product snd cement
Answer:	On the tool itself, it indicates "Made in Mexico"
Question:	Can you buy just one
Answer:	3.30.17 - Mine was metal. Not as pictured. Particularly low quality, impossible to see the markings, and difficult to get the bits out of...not like a standard metal index. I've owned several of these sets over the years and this is the first that has come with the metal case. TERRIBLY disappointed.

Product features

Durable & Sturdy

Made of industrial-grade rubber, durable & sturdy. Easy pass heavy vehicles under 18,000 LB. Full of flexibility, will not be easily deformed

Bright Yellow Lid

The lid with bright color yellow is highly visible both in the day or night, features slip and electrical safety warning symbols molded into the treadled surface to remind drivers to slow down

Effective Wire Protection

Features a unique modular design which connects multiple ramps together for spanning larger lengths of cable. The fast and simple way to protect the wires, cables and audio and video data lines

Wide Application

Widely used in playgrounds, exhibition halls, squares and temporary emergency applications in most public places. And in the event of fire, all these cable protectors have a low fume emission and non-toxic, will not release harmful chlorine gases.

• SAFELY CONCEALS & SECURES UNSIGHTLY CORDS: Black floor cord cover efficiently hides and protects cords, wires, and cables, helping to keep floor areas clear and safe. Flat exterior surface helps prevent tripping and allows wheels and carts to roll over smoothly. Anti-slip texture on the bottom prevents sliding on smooth floors. Each unit is 6.5 feet (2 meters) in length, and is 0.67 inches tall and 3.27 inches wide on the outside. Tape / adhesive not included.
• FLEXIBLE ODOR-FREE PVC MATERIAL IS EASY TO UNROLL & CUT: Floor cord protector is made of heavy-duty, flexible, black PVC. Unlike rubber floor cord protectors, this PVC version has no bad smell out of the box, is easy to unroll, and needs no additional treatment (heating, boiling) to lay flat. The PVC is easy to cut to any length with a knife or strong scissors. PVC provides extra insulation for speaker wires and home theater cables.
• SECURE MANY CORDS WITH THREE LARGE CHANNELS: Power and electrical cords, extension cords, coax cables, ethernet cables, and other wires can be stored securely in three deep channels. The middle channel (0.93 x 0.42 inches in size) holds up to five power cords or ten ethernet cables. Two side channels (0.75 x 0.39 inches) each hold one power cord or two ethernet cables. (Note: the three channels for this cord protector come unopened. They can be easily opened with scissors or a knife.)
• YELLOW STRIPES ON TOP FOR VISIBILITY AND SAFETY: Bright yellow stripes run along the length of the top of the cord protector so that it is safely visible. (Note: yellow stripes are non-reflective.)
• PERFECT INDOORS & OUTDOORS: Cable protectors and cord covers are suitable for offices, homes, workshops, warehouses, concerts / events, or outdoor settings. Slim size fits under furniture and along any surface or edge. Can be used as electrical cord protector or extension cord cover.

User questions & answers

Question:	Does Linnai make a 12 feet cord cover for outdoor use? I am concerned about using two 6.5 feet cord covers because of the joint where they would mee
Answer:	Hi Ashley, this watch's band is approximately 8.5 inches. Please let us know if you have any other questions.
Question:	Could I use this in a parking lot
Answer:	I prefer a velcro band. I searched on Amazon and Ebay with no luck. One day in Walmart I spotted one I liked, the girl put it on. All for $8. Love it.
Question:	Is this available in other colors such as beige
Answer:	Designed for a male, but as a female I tried it on and would love to wear it as well. (It was a gift for a male)
Question:	Can this be used strictly for outdoor use
Answer:	41.2 mm by 11.6mm thick. Good watch can read it in the night without my glasses.

Product description

This cleverly designed mat has a durable nylon carpet surface and nitrile rubber backing with integrated cord run to secure loose cords, cables and wires and a high-visibility border to highlight a potential hazard. Grey Mat surface A floor cord cover to protect cords, ethernet cables, power cables, wires and extension leads. Create a low profile, trip free, pedestrian walkway. Use under desks to prevent tangles with feet and keep workers safe. Ideal for events, for temporary protection of workers and visitors against trips and falls and easy re-positionable No adhesive or fixing required. Reusable Repositionable.

• REDUCE TRIPPING HAZARDS - Health and Safety - High visability black and yellow edging clearly highlights the mat. Does not curl
• INTEGRATED CABLE CHANNEL - The open cable chanel keeps the cords located under the centre of the mat - Low Profile - Skid resistant rubber back , Reduce tripping accidents in the workplace,Safely conceals & secures unsightly cords
• MACHINE WASH and TUMBLE DRY at 140 F - eye-catching border graphics to highlight potential hazard - Durable floor cord cover
• HEAVY DUTY NYLON CARPET SURFACE - High quality Nyrlon carpeting. Use with Power and electrical cords, extension cords, coax cables, ethernet cables, and other wires
• INDUTRIAL DURABLE NITRILE Rubber Backing, lies flat under its own weight and does not crack or curl can be machine washed, unique gripp pattern on back improves performance on both carpet, wood and tile floors.

• 𝗘𝗩𝗘𝗥𝗬𝗧𝗛𝗜𝗡𝗚 𝗬𝗢𝗨 𝗡𝗘𝗘𝗗: The D-2 Rubber Duct is perfect for handling a standard computer station set-up: power cord(s), and ethernet/CAT6 cables, COAX cables, Phone lines, and more.
• 𝗤𝗨𝗔𝗟𝗜𝗧𝗬: Made in the USA with High Quality Solid Extruded Rubber which makes it even easier to install. This product can be cut to any length and offers a skid-resistant grip to reduce slipping.
• 𝗗𝗜𝗠𝗘𝗡𝗦𝗜𝗢𝗡𝗦: 1/2"H x 3/4"W Slit in the middle | Total Height: 3/4"; Total Width: 3-1/4"; Total Length:36"
• 𝗟𝗔𝗬 𝗙𝗟𝗔𝗧: This product is made from high quality rubber, and like all rubber, it will take shape in time, but for immediate results, place in any warmer area: outside in sunlight, warehouse, garage, etc. The cord cover will become very pliable.
• 𝗣𝗥𝗘𝗠𝗜𝗨𝗠 𝗣𝗥𝗢𝗧𝗘𝗖𝗧𝗜𝗢𝗡: The D-2 Rubber Duct is designed to protect your loose floor cables from abrasions and prevents tripping. The generous channel size can accommodate a combination of power cords, ethernet/CAT6 cables, COAX cables, Phone lines, and more.

User questions & answers

Question:	I have a 10ft power strip and the cord is pretty thick. Would this be the best contraption to use to cover the cord
Answer:	It comes with 2-years Amazon warranty. The warranty card that we have is international warranty card.
Question:	Are the side channels large enough for cat5? Assuming I've the patience at least? Is it continuous, or are there blockages
Answer:	If your going to buy a watch .. battery is not a matter and it’s not a big issue as long as you like the watch go for it, it’s nice one
Question:	I see that the center conduit is split for easy use, but how do I use the other channels? Must the chords be threaded
Answer:	From It Must Be Time, this item with come with manufacturer warranty as well as Amazon warranty. You will be covered should you have any issues during warranty period.
Question:	Do you need double sided tape for this D-2 Rubber Duct Cord Cover or wil it just lay flat on it's own
Answer:	This model with a blue dial is model 241724.1

Product features

Electriduct D Series Rubber Duct Cord Protector

Strong enough to handle vehicular traffic, the D series rubber cord protector shields wires, power cord(s), and CAT6 (Ethernet) cable(s) making this a must for any standard computer station set-up.

The D-2 series rubber duct comes in three different colors (Black, Grey and Brown) and is available in 5-foot and 10-foot lengths that can be cut to fit and match any work area.

Product description

Suitable for use outdoors, the rubber topped version of cord protect enables it to be used in conditions where oil, grease and chemicals are present - This cleverly designed mat has a Non-Slip embosed Nitrile Rubber Surface and Nitrile rubber backing with integrated cord run to secure loose cords, cables and wires and a high-visibility border to highlight a potential hazard. A floor cord cover to protect cords, ethernet cables, power cables, wires and extension leads. Create a low profile, trip free, pedestrian walkway. Use under desks to prevent tangles with feet and keep workers safe. Ideal for events, for temporary protection of workers and visitors against trips and falls and easy re-positionable No adhesive or fixing required. Reusable Repositionable.

• REDUCE TRIPPING HAZARDS - Health and Safety - High visability black and yellow edging clearly highlights the mat. Does not curl
• INTEGRATED CABLE CHANNEL - The open cable chanel keeps the cords located under the centre of the mat - Low Profile - Skid resistant rubber back , Reduce tripping accidents in the workplace,Safely conceals & secures unsightly cords
• EASY CLEAN can use a HIGH PRESURE WASHER - resistant to OIL and GREASE eye-catching border graphics to highlight potential hazard - Durable floor cord cover
• HEAVY DUTY NITRILE RUBBER SURFACE. Use with Power and electrical cords, extension cords, coax cables, ethernet cables, and other wires
• INDUTRIAL DURABLE NITRILE Rubber Backing, lies flat under its own weight and does not crack or curl can be machine washed, unique gripp pattern on back improves performance on both carpet, wood and tile floors.

User questions & answers

Question:	Is this product trimmable? If so, how easy is it to do
Answer:	No alarms at all. 2 years I use this one without any problems. water proof 100%. No scratches on the glass at all.. some scratches on the beld while of using but not critically..

• 1 pack high quality 2 channel rubber cable protector ramps, which dimension is 39.37"L x 9.84"W x 1.69"H.
• Cable cover ramp include 2 channel, can be effectively secures cables, channel size of the cable ramp is 1.18"W x 1.18"H.
• Speed bump can heavy duty 22000Lbs maximum load capacity for Most small cars whether indoor or outdoor.
• Cable protector ramps design with modular interlocking connector, multiple ramps can be joined together.
• The color of the cable protector ramp is visible yellow safety color, pedestrians and vehicles can be reminded whenever day or night to guaranteed safe passage.

User questions & answers

Question:	How much does each section weigh
Answer:	It's not that kind of GPS. It uses a connection to determine what time zone you're in, and adjusts. It links to the atomic clock too. The process takes quite a while, and usually happens at night. Minor convenience, but pretty cool for the market they're going for. I like mine, but it's not a must have. I would recommend getting the stainless version though. The titanium one is difficult to get bands, and band parts for. Also, my clasp broke almost immediately, and my search for parts revealed that it's common. They seem to be making them intentionally fragile, so you'll have to keep sending it back for repairs.
Question:	Will a 1" round cable fit into this channel
Answer:	Yap. If for example February 28 days you should manually change the date from 29 to 1st
Question:	I have a 5-ft. sidewalk I want to run these across. Using 2 together will be too long, what can I cut the excess with
Answer:	No. Second meter only
Question:	Will this fcome ramp accomodate a standard 5/8" garden hose
Answer:	About 100 grams. It's not heavy or huge. I didn't take it off for a 2 years.

Product features

Features:

• Size: 39.37"L x 9.84"W x 1.69"H

• Channel Size: 1.18"W x 1.18"H

• Channel: 2