11 best pulse power inverters

Product description

Specifications:

Size: 50*20*18mm/1.96*0.78*0.7"

Input Voltage: 3.6V/4.8V DC

Output Voltage: 40-50kV AC

Working Current: 1800mA

Ignition Distance: 20mm

Input Wire Dia.&Length: 1.2±0.03 & 130mm 

Output Live Wire Dia.&Length: 2.2±0.03 & 280mm

Output Neutral Wire Dia.&Length: 2.2±0.03 & 280mm



Package Includes:

1 x High Voltage Generator

• HIGH EFFICIENCY -- The module can output high voltage pulse current, small size and high efficiency
• VOLTAGE RANGE -- This module is the finished module of transformer/booster for small scientific production
• EASILY IGNITE -- The input voltage is 3.6V/4.8V DC and will output 40kV-50kV AC high voltage
• WIDE APPLICATION -- It can be used as security equipment accessories, gas range ignition, or for electrostatic adsorption experiment
• 2 SETS COMPONENTS -- The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great

Product description

Input Voltage/Hz/Phase 220/240V 50/60 Hz 1Ph -- TIG Output Amps 5 to 210A DC; 10 to 210A AC --Stick Output Amps 10 to160A--Duty Cycle @ Rated Amps 40% @ 210A -- Wave Form Control Sine Advanced ,Square and Soft Square --AC Frequency 15 to 200 Hz-- AC Balance -30 to +30% (20-80% of EP) --Tig Start Type Lift and HF start --Pulse Type Standard (for AC and DC use) Advanced (for AC use only)--Pulse Frequency DC .5 to 500 Hz AC .5 to 10 Hz --Pulse Time On % ( Pulse Width/Balance) 20 to 80% --Pulse Amp (base) Adjustment 1 to 99% of Welding Amps--Pre-Flow Time .1 to 9.9 Seconds--Post-Flow Time 0 to 25 Seconds -- Start Amps 1 to 100% of Welding Amps--End Amps 1 to 100% of Welding Amps--Up Slope 0 to 10 Seconds--Down Slope 0 to 25 Seconds--Adjustable Hot Start Time (Stick) .5 to 5 Seconds--Adjustable Arc Force Control (Stick) 0 to 100%--Adjustable HF Start Time Yes .5 to 5 Seconds--2T/4T Torch Control Yes --Adjustable Lift Start Amps Yes

• Microprocessor control offers precise management of welding parameters and functions
• 3 types of wave form for AC welding: Sine Wave, Advanced Square Wave, and Soft Square Wave
• programmable Stick functions which include hot start time, hot start intensity and arc force control
• IGBT TECHNOLOGY - standard type pulse feature for AC and DC, and a special Advanced Pulse for AC
• Ideal for generator use with a Power Factor Correction (PFC) of greater than 99-Percent

User questions & answers

Product features

2017 Everlast PowerTIG 210EXT Inverter-based IGBT Technology Welder

If you are wondering what having digital microprocessor control can mean, just ask anyone who has used it. The benefits are numerous, whether its increased productivity, or increased weld quality, or the ability to make precise settings, and fine tune them to the exact standards required. This is all part of the benefit of owning a PowerTIG 210 EXT. This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight.

IGBT Technology - standard type pulse feature for AC and DC, and a special Adva

The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave, and Triangular. These help to offer flexibility while welding Aluminum. But that's just part of the story. This TIG/Stick welder also features programmable memory, adjustable AC Frequency, and adjustable AC balance control. It also works quite well as a stick welder featuring items like adjustable hot start and arc force control for maximum welding flexibility. The heavy duty HF arc start design reduces traditional HF component maintenance issues. The unit also features two pulse modes, standard and advanced pulse. In the advanced pulse mode the welder oscillates between AC and DC- polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum. Although the unit may seem quite complex in its list of features, it's really quite simple due in part to the intuitive design which leads to quick and easy to setup whether you are a welding professional or just an enthusiast.

Product description

Specifications:

Input Voltage: DC3.6V-6V

Working Current: 1.5A

Output Voltage: DC20KV

Output Current: 0.05A

Electric Arc Distance: 5mm

Red Wire: Input positive

Green Wire: Input negative

Note:

1, Output ends of cable should be adjusted properly before power on, and the arc distance depends on battery voltage and capacity.

2,The arc distance should be from short to long, do not produce a longest arc at first or the module might be damaged easily.

Package Includes:

1 x High Voltage Generator

• 【Miniature Arc Pulse Booster】This high voltage generator is a finished module of transformer/booster for small scientific production
• 【High Efficiency】The high voltage converter can output high voltage arc, small size and high efficiency
• 【Widely Applications】This high voltage pulse generator can be used for high voltage experiment, teaching, and product development
• 【Working Range】The input voltage of the arc generator is DC 3.6-6V and will output DC20KV high voltage
• 【Application Principle】Two high voltage wires can light up cigarette or paper, single high voltage wire can discharge to any metal quietly

User questions & answers

Product description

Specifications:

Size: 55*24*22mm/2.17*0.94*0.87inch

Input voltage: 6V-12V

Input Current: 0.5A-2A(depending on the input voltage)

Input line length: about 10cm/3.94inch

High Voltage type: DC type

Output voltage: about 80KV (please pay attention to safety when used)

Output current: 0.5A

Output line length: about 10cm/3.94inch

High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)



Module Usage Precautions:

1. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.

2. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.

3.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.

4. Small capacity series lithium battery  is 7.2 V, voltage will drop to about 4V  when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.



Package Included:

1 x High Voltage Pulse Generator



Note:

1.The power time is not above 20 seconds each time.  Since the output power is strong, it must be driven by rechargeable battery or storage battery. Improper voltage and long work will easily damage the high voltage module. Be careful when testing and using!

2. Ignite distance keep within 1cm, please.

• 【Inverter Transformer】This High Voltage Transformer module is a small production with high-pressure science inverter transformer/booster finished module,High temperature arc igniter, with 6-12v high power, instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to use.
• 【Used For】Arc Pulse Ignition Module can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
• 【 Easy to Used 】 High Voltage Arc Generator can generate high temperature and high frequency arc, can easily ignite combustible.According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge intensity is violent.
• 【Avoid No-load】Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
• 【Input the Power】Input the power of 6-12v, output two levels of terminal can produce 1.5cm length purple high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.

Product description

HOPE DONGKER MAKES YOUR LIEF EASIER!



Specifications:

1. Module Model: MCF-12-2

2. Physical Volume: 42*22*17.5mm

3. Input voltage: 6V-12V

4. Input Current: 0.5A-1A

5. Input line length: about 11cm

6. High pressure type: pulsed DC type

7. Output voltage: about 80KV (please pay attention to safety when used)

8. High voltage poles discharge distance: 1.5cm-2cm

9. About Power supply:recommend 6V and above 2000mAh for best results



Feature:

1. High voltage pulse current output

2. Small size

3. high efficiency

4. Simple peripheral circuits(just need button and battery)



Appliction:

1. Science experiments

2. Electronic Instruments

3. Ionizer

4. DIY Kit



NOTE:

1. Avoid power on when No load.You must adjust the appropriate distance for high-voltage terminal before power on.The longer Arcing distance,the higher input voltage and battery capacity.

2. It is prohibited exceed the maximum arcing distance.Otherwise,Energy can not be released due to high pressure, easily damaged modules.

3. Can not work long time.

4. Please connect it to metal after test to release surplus energy!

5. It is a high-pressure arc generator and not high temperature arc generator so it can not ignite paper or cigarette

• ★Avoid power on when No load.You must adjust the appropriate distance for high-voltage terminal before power on.The longer Arcing distance,the higher input voltage and battery capacity.
• ★It is prohibited exceed the maximum arcing distance.Otherwise,Energy can not be released due to high pressure, easily damaged modules.
• ★Can not work long time. Please connect it to metal after test to release surplus energy!
• ★It is a high-pressure arc generator and not high temperature arc generator so it can not ignite paper or cigarette
• ★SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.

Product description

Features:

This high-voltage generator module is based on the principle of Tesla coil.

This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.

Ideal for students to study electrical experiment, do science experiment, etc.



Specifications:

Dimension: 88 x 26mm (LxD)

Input Voltage: DC 3.7V - 6V

Input Current: 4A

Input Wire Length: 10cm (RED & Green/White Wire)

Output Voltage: 800KV - 1000KV (Please be careful when using)

Output Current: 0.5A

Discharge Time: 10s

Arc distance/High voltage discharge distance range: 15mm - 20mm

Power supply: 1x 3.7V Lithium Battery, 2x 3.7V Lithium Batteries in series(such as 18650 Battery), NiCd/NiMH Batteries, 4V/6V Lead-acid Batteries, etc. (6V battery is Recommended for the best effect)



Input Wiring:

Red - Positive

Green/White - Negative



Notes:

1. The high-voltage module should not be powered on when it is under high voltage no-load status. (Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity and voltage is proportional to the high voltage arc distance)

2.During the experiment, please test the arc distance from short to long, DO NOT exceed the maximum arc distance, or the high voltage energy might not be released and it may easily damage the module.

3. The input voltage will affect the output voltage and Arc distance.

4. The power of the module is large and the heat dissipation inside is weak. Please let the module work intermittently, continuous work no longer than 1 minute. Improper voltage and long working hours may easily damaged the module.



Package Included:

1Pcs NOYITO Arc Generator DC 3.7V-6V to 800KV-1000KV Boost Power Module

• This high-voltage generator module is based on the principle of Tesla coil.
• This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.
• Ideal for students to study electrical experiment, do science experiment, etc.
• Input: 3.7V - 6V / 4A
• Output Voltage: 800KV - 1000KV

Product description

PowerTIG 325EXT is built for superior industrial performance. With Digital microprocessor control over the Infineon IGBT inverter, and up to 320 amps of welding Power, the PowerTIG 325EXT packs the most punch of any AC/DC TIG welder in the Everlast line. The module design of the IGBT's creates a reliable platform designed for years of service. The unit is equipped with many features that improve its value in the shop. One of the features that is highly useful is the Advanced Pulse in AC which can greatly increase penetration while welding aluminum, and make it seem like you are welding with a lot larger machine than you are. Wave form control, AC frequency and AC balance control combine to round out the welder into a very capable Aluminum welder. However, the DC capabilities should not be overlooked either with plenty of features which includes a standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions. AC/DC TIG, DC Stick . 208/240V 1PH and 3 PHASE, 320A/22/8V at 35% Duty Cycle/ 40 C.

• Lightweight and portable 208/220/240/460 V 3 PHASE
• Digital/Micro-controlled // 320A/ 20V @ 60% Duty Cycle/ 40º C
• AC Wave Forms: Advanced Square /Soft Square / Triangular / Sine
• DC Pulse Frequency: .1-500 Hz / Standard AC Pulse Frequency: .1-250Hz
• Hot Start Amps: 0-100% Stick : Adjustable Arc Force Control Stick Hot Start Typ:Adjustable Hot Start

User questions & answers

Product description

Item name: High-Voltage Generator

Output parameters:800-1000KV/0.5A

Input line length: 10 cm/3.94 Inch (red positive green negative)

Output Line length: about 16 cm/6.30 Inch

High-voltage two-pole discharge distance: 1.5 cm - 2 cm (do not exceed)



Features: This module is a high voltage module/high voltage generator made of high voltage package/transformer through component circuit. It can be used as a high voltage source for student science experiment/electronic instrument/negative ion generator/scientific small production. The module uses Tesla. The principle of the coil is made, the high-voltage pulse is output, the volume is small, the efficiency is high, and the discharge intensity is fierce.

The module is divided into input and output. The red and green lines are the input terminals, red and green are negative, and the output is two high-voltage lines of the same color. The input terminal can be connected to the battery to generate high-voltage arc.



Precautions for use:

1. The module should avoid energization when the high voltage is no-load. Before the power is turned on, the high-voltage discharge end distance must be adjusted. The arc distance at the output end is proportional to the battery voltage and capacity used. 2. When testing the arc distance, it should be tested from short to long. It is strictly forbidden to exceed the longest arcing distance of the module. Because the high voltage energy cannot be released, the module is easily damaged.

3. The power of the module is large, and the internal heat is not suitable, so it is not allowed to work for a long time.

4. The small-capacity lithium battery is connected in series of 7.2V. The voltage measured in the arcing state has dropped to about 4V. The smaller the capacity, the lower the voltage is pulled. Therefore, it is recommended to use more than 2000MA lithium battery, and it is better to have a battery of 4000MA or more.

• This module is a high voltage module/high voltage generator made of high voltage package/transformer through component circuit.
• The module is based on the principle of Tesla coil. Output high voltage pulse, small size and high efficiency.
• Can be used for negative-ion generator, electronic instrument, and science experiment.
• The input voltage is DC3.7-7.4V and will output 1000kV high voltage.
• Length 88.5mm/3.48Inch.Diameter: 26mm/1.02Inch.

Product description

Specifications

Model: TIG-200AC/DC

Rated Input Voltage: 110/220V ± 15%,1-PH

Power Frequency: 50/60Hz

Current range:10A-200Amp

AC Duty Cycle:20%-80%

Pulse Duty Cycle:10%-90%

Max. Thickness: 27mm

Frequency:80%

Duty Cycle: 60%

Insulation Grade: B

Package Contents

1 X Foot Switch

1 X TIG Gun

1 X TIG Stick Welder

1 X Earth Clamp

1 X Arc Electrode Holder

1 X Argon Gas Meter

1 X Protective Helmet

1 X Back Cup

2 X Nozzle

2 X TIG Collet

1 X User Manual

• Model: TIG-200AC/DC; Insulation Grade: B; Max. Thickness: 27mm.
• Rated Input Voltage: 110/220V ± 15%,1-PH; Power Frequency: 50/60Hz;
• AC Duty Cycle: 20%-80%; Pulse Duty Cycle:10%-90%; Frequency:80%; Duty Cycle: 60%.
• Package Contents: 1 X Foot Switch, 1 X TIG Gun, 1 X TIG Stick Welder, 1 X Earth Clamp, 1 X Arc Electrode Holder.
• Package Contents: 1 X Argon Gas Meter, 1 X Protective Helmet, 1 X Back Cup , 2 X Nozzle, 2 X TIG Collet, 1 X User Manual.

Product description

If you are looking to take your shop or business to the next level in TIG welding capability, the digital inverter-based PowerTIG 255EXT delivers exceptional power and performance at a budget friendly price. In fact, the PowerTIG 255EXT not only has a long list of competitive features but also unique features that distinguishes it from the competition. You'll find surprisingly comptetive performance when comparing feature to feature against the competition such as memory, pulse and wave forms thanks to the digital microprocessor. Two "Easy Start Up" modes also add to the units versatility while keeping operation simple. The unit also excels as a stick welder featuring hot start time, hot start intensity and arc force control adjustments, making it a perfect welder for E6010 or E7018 welding. Everything on the AC/DC pulse TIG welder has been carefully designed for maximum life and repairibility down the road with componentized design and IGBT module components from name brand manufacturers , making diagnosis and repair, a simple, easy process. Several new features have been recently released. The spot weld timer feature allows the operator to make perfect, consistent spot welds when tacking up or welding sheet metal. The unit also has a more convenient way to purge gas and set gas without initiating arc flow with a dedicated purge button. Most importantly the PowerTIG 255EXT operates on 120V or 240V. Maximum output during 120V operation is 150 Amps for TIG, and 120 Amps for stick.

• Heavy-Duty IGBT Power Modules increase reliability and performance
• True low amp operation down to 3 amps DC and 5 amp AC
• AC Wave Forms: Advanced Square /Soft Square / Triangular / Sine
• Simplified menu design allows settings to be quickly selected and adjusted
• 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals

User questions & answers

Product description

Specifications:

Size: 55*24*22mm/2.17*0.94*0.87inch

Input voltage: 6V-12V

Input Current: 0.5A-2A(depending on the input voltage)

Input line length: about 10cm/3.94inch

High Voltage type: DC type

Output voltage: about 80KV (please pay attention to safety when used)

Output current: 0.5A

Output line length: about 10cm/3.94inch

High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)



Module Usage Precautions:

1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.

2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.

3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.

4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.

5. Small capacity series lithium battery  is 7.2 V, voltage will drop to about 4V  when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.



Package Included:1 x High Voltage Pulse Generator

• High temperature arc igniter, with 6-12v high power, instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to use
• It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science
• It can generate high temperature and high frequency arc, can easily ignite combustible
• According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency
• The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge intensity is violent

User questions & answers