14 best nimh chargers

• Individual charging status for each slot, can freely charge 1,2,3,4 Ni-MH Ni-CD AA/AAA rechargeable battery.
• Smart LCD to show its charging progress separately, the battery icon stop flashing when fully charged.
• Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
• Trickle charged mode will help maximize the capacity of battery to full.
• Worldwide usage: 100-240V AC, 50/60 Hz.

User questions & answers

Question:	What is the operating voltage & frequency 120v, 50hz or 220v, 60hz or 120-220v, 50hz-60hz
Answer:	EBL-907 shows 100 to 240 volts AC - 50/60 hz
Question:	will it charge 2/3 aa size battery
Answer:	No, it is for standard aa/aaa sized batteties.
Question:	Does it come with the rechargeable batteries
Answer:	NO! NO! NO! It does NOT come with the rechargeable batteries!
Question:	Does the EBL 907 charger work with non-EBL batteries like the Amazon Basic batteries
Answer:	It will work with any Brand Nickel Cadmium and Nickel Metal Hydride cell. It will not work with Rechargeable Alkaline (RAM), Nickel Zinc, or Lithium Ion. I used this on Panasonic Eneloop Nickel Metal Hydride cells.

Product features

EBL 907 Model Smart Individual Battery Charger

Model

EBL 907 is professional on AA, AAA Ni-MH/Ni-CD rechargeable battery.

Individual function helps to charge batteries in pairs and single.

Compatible:

Can both charge 1,2,3,4 AA and AAA Ni-MH Ni-CD rechargeable batteries individually.(Do not charge alkaline or Lithium batteries)

Features of charger

Input: 100-240V AC, 50/60 Hz 500mA Max

Output:

1x AA 1.2VDC 2000mA, 1x AAA 1.2VDC 2000mA;

2x AA 1.2VDC 1000mA, 2x AAA 1.2VDC 1000mA;

3x AA 1.2VDC 500mA, 3x AAA 1.2VDC 500mA;

4x AA 1.2VDC 500mA, 4x AAA 1.2VDC 500mA;

• Independent Battery Charger - EBL universal LCD AA AAA C D battery charger, independent charging channels, 8 bays for 1/2/3...7/8 pieces AA/AAA Ni-Mh rechargeable batteries or 4 slots for 1/2/3/4 pieces C/D Ni-MH rechargeable batteries.
• LCD Display Rechargeable Charger- Rechargeable AA AAA C D Battery charger with smart LCD screen indicates the whole charging process for the AA AAA batteries and C D rechargeable batteries. "CHG" indicates charging. "ERROR" indicates battery damaged or installation error, support battery repair function.
• Fast Battery charger: USB 5V/2A and Type C Input, backup input port, improves your charger more adaptability, give you more choices to fulfill your batteries, saving the long waiting time for charging. （Please use 2.0A Adapter ONLY, Adapter not included. For Free Adapter, Please go to PROMOTION)
• Safety Guarantee - Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
• Intelligent control - Latest battery detection technology, automatically turn to trickle charge when batteries are nearly full charged.

User questions & answers

Question:	Can this charge 2 D batteries at once
Answer:	I found a trick online that RESTORED ALL MY BATTERIES. It looks like magic but it worked for me on 8 batteries. You can google it and find the videos. Basically: find two short wires. Connect a bad battery with a good battery for 3-4 seconds (male to male, female to female). This will resurrect the bad battery but drain the good one. Now charge them both. Again, this trick salvaged 8 batteries I already put for recycling.
Question:	Will this charge lir123a batteries
Answer:	You don't need to charge in pairs, you can charge one battery.
Question:	Will this charge 6 D batteries at the same time
Answer:	Mine is more than 24hrs but its still on one bar of charging my C batteries😤
Question:	Will this charge all types of batteries (not just ebl
Answer:	I cannot get this device to charge EBL 9V NiMH batteries. I tried 2 of them and the red light inside the charger lights up, but no charging, no voltage occurs. This is an EBL charger and EBL batteries! The charger will charge other EBL batteries like AAAs and AAs. Is it defective?

Product features

EBL LCD Universal Battery Charger for AA AAA C D Rechargeable Batteries with Type C Input, AA AAA Battery Charger

EBL, since 1998, professional on batteries and chargers for more than 20 years.

EBL always persistently providing high quality products for everyone.

Compatible with

EBL-C9008TC can charge 8 pieces of AA/AAA Ni-MH batteries or 4 pieces of C/D Ni-MH batteries freely.

Both types of batteries can be charged at the same time.

Working Environment Condition

Working temperature: 0℃ - 35℃

Storage temperature: -10℃ -50℃

Surface temperature of Charger: 35℃-80℃

Surface temperature of Battery: 25℃-60℃

• Warm Tips: Go to Promotion to Get a USB Adapter

Super Fast Charging Technology

Specfication:

Input: DC 5V 2A(Micro USB/Type-C)

Output: DC 1.2V 1800mA(D/C 1800mA AA/AAA 900mA)

1Pcs AA/AAA/C/D Ni-MH Batteries Charging Time Cable:

(Charging faster than other name-brand LCD Charger)

AAA 800-1100mAh: 0.8-1.2 hours

AA 2300-2800mAh: 2.5-3 hours

C 5000mAh: 2.7 hours

D 10000mAh: 5.5 hours

Adopt super fast charging technology, （NOTE: Fit for 2.0A adapter only, DO NOT use 1.0A adapter. For Wall Adapter, Please go to PROMOTION）save your time and save your batteries' life.

Screen Protector

The Screen Protector film protects the screen from scratch during transportation.

You can choose remove it or not as they liked.

It will help our items far away from scratches better and make sure what customer got are brand new!

Upgraded Independent Cycle Tech

The Battery Charger can charge 1-8 Ni-MH/Ni-CD AAA/AA rechargeable batteries or 1-4 Ni-MH/Ni-CD C/D rechargeable batteries respectively.

Every Slot has their own cycle, you will never worry about having to find two Low-power batteries for charging.

Intelligent Auto-detection Technology

Our Charger can Intelligently auto-detect batteries' status.

Faulty or Incompatible battery will be indicated by LCD display with "ERROR".

Two Charging Ways - More Convenient

USER-FRIENDLY DESIGN!

Plus one more Type C input port on charger. More User friendly!

It improves your charger more adaptability.

This design gives you more choices to fulfill your batteries.

Help you avoiding the awkward situation, if one type USB cable isn't with you, just find another cable and charge your batteries!

• 🔋 Upgraded Multi-function Charging: Independent 12 charging channel, freely charge 1-12 pieces Ni-MH Ni-CD AA AAA rechargeable batteries and 1-2 pieces Ni-MH Ni-CD 9V rechargeable batteries.
• 🔋 Visible Charging Process: The LCD shows the real time charging progress of AA AAA batteries, and the LED light indicates the 9V’s.
• 🔋 Ultra Fast Charging: Charging current up to 1800mA for AA AAA rechargeable batteries, and 260mA for 9V batteries, 2x faster than others normal charger, saving your waiting time.
• 🔋 Broken & Alkaline Batteries Detection: Could identify non-rechargeable, short-circuited or defective batteries, and switch off automatically to ensure a safe using.
• 🔋 Safety Assurance: Made with high quality Fire-proof material, along with multiple protection technologies, to keep your devices away from over-voltage, over-charging, over-current, and short circuit, etc.

User questions & answers

Question:	where is this made
Answer:	on the back it says made in china
Question:	Will it charge nimh aa solar rechargeble batteries
Answer:	Yes, I used it to charge my solar light aaa batteries
Question:	What are the dimensions of the charger itself (not the packaging
Answer:	The packaging, which is very solid is 8 1/4" wide, 4 /8" deep, and 1 7/8" tall. The charger is 7 3/8" wide, 4 1/8 deep, and 1 1/8" tall. Except for the height 'tall' dimension the length and width are the differences between the thickness of the cardboard and bubble wrap packaging.
Question:	Does it discharge the batteries before recharging them
Answer:	no

Product features

12 Bay AA AAA & 9V Battery Charger

✔Individual 12 charging slots

✔Fit for aa aaa & 9v rechargeable battery

✔Fast charging technology

✔Clear LCD display & LED indicator

✔Auto-off when fully charged

✔With multiple protection

Upgraded AA AAA 9V Battery Charger

You can charge 1-12 pieces AA/AAA Ni-MH Ni-CD rechargeable batteries, also can charge 1-2 pieces 9V battery.

Battery charger will switch off automatically if charge broken or inapplicable batteries, which is more intelligent and safety.

Advanced Trickle Charging

Adopted trickle charging technology makes the battery reach its maximum capacity and protect the battery - More durable, longer service life.

Individual Display - LCD & LED

* Larger LCD Display for AA AAA Batteries: While LCD screen shows “CHG” means Charging process, “FULL” means Fully charged, and especially “ERR” means Incompatible battery.

* Smart LED for 9V Batteries : Red Light On: Charging ; Green Light On: Charge completed

Product description

Panasonic K-KJ17MCA4BA Advanced Individual Cell Battery Charger Pack with 4 AA eneloop 2100 Cycle Rechargeable Batteries

• Recharge up to 2100 times
• Maintain up to 70% of their charge after 10 years (when not it use)
• 2000mAh type, 1900mAh min, Ni-MH pre-charged rechargeable battery
• 4 position charger with advanced, individual battery charging, AA and AAA cells
• Battery detection technology - automatically shuts off when charging is complete

User questions & answers

Question:	can you charge other brand batteries in this charger
Answer:	I have this charger and it will not charge any brand battery except the Eneloop battery. Do not Buy it for other batteries, it will not work. I bought it based on reviews and that I have about 20 NiMH batteries of various brands. Not one of the 20 would charge on this charger.
Question:	Must you charge 4 batteries at a time OR can you charge, say 2 with 2 open slots
Answer:	The Panasonic BQ-CC17 can recharge 1, 2, 3 or 4 AA/AAA cells at once. You don't need to charge in pairs like in the case of old MQN06 charger.
Question:	i just received the charger and i do not see any indicator lights on mine. anybody
Answer:	Just to update this - the chargers shipping now have hidden lights (unlike the product picture). To see them charger must be plugged in with batteries in place. NOTE: To clarify the paper comment - the batteries are shipped in the charger in the charging position. Before first use, remove all four batteries and you will find a small piece of cardboard paper at the top covering the positive charging contacts. This paper is to be discarded. Put the batteries back in position, plug in charger to working circuit and you will then see the now hidden lights under the white plastic "skin" below each battery. This is still true as of 11/2018.
Question:	What is the difference between the Panasonic K-KJ17KHCA4A Eneloop Pro vs the Panasonic K-KJ17MCA4BA? Which is a better choice to buy
Answer:	The pro cells hold about 25% more capacity under use before you have to charge it. That translates to longer run times for things like hiking GPS and high powered flashlights and wireless microphones in constant use. The trade off is that the pro cells don't retain a charge when stored which is good if you normally plan to drain the battery within a few days of charging it. In a TV or DVD remote control, the pro cells would have to be charged at least once every several months, where the regular cells will last for years without charging in remote controls that are not used daily. So far, I have never had an Eneloop battery ever leak, where I have had several expensive remote controls and headlamp LED's destroyed by leaking modern alkaline batteries. Modern alkaline batteries will often start leaking while still performing and still many years before the best used date has arrived. Modern warrantees for alkaline batteries only cover the battery that fails to perform, not the expensive device that was destroyed by the leaking alkaline battery. I have had several Duracell batteries start leaking while still unused in the original package stored in a cool dry place (basement) and still have a few years before the best used date has arrived. Today's alkaline batteries are junk. The standard Eneloop battery seems to be the most dependable battery I have ever found. They cost more, but the extra cost is worth it. Other brands of NiMH batteries I use often don't hold a charge in storage. The supposed lower voltage compared to alkaline is not the whole truth. Under extreme low power loads, alkaline battery voltage is higher, but under higher loads like cameras and flashlights, the alkaline battery voltage drops lower than NiMH battery within a second of the time the load is applied and then goes back up to resting voltage after the load is turned off. After an alkaline battery looses around 20% of its original charge, it is performing worse than a rechargeable NiMH battery and many devices like cameras can't take that drop in voltage.

Product features

eneloop

eneloop Ni-MH 'Low Self Discharge' batteries utilize Panasonic’s advanced rechargeable cell technology allowing them to be recharged up to 2100 times.** These battery cells are ideal for all household products including flashlights, wireless gaming devices, digital camera flash units, and wireless mouse and keyboards.

• Individual Charging Slot Charger: Ultra compatible 1-4 AA/AAA/C/D and 1-2 9V Ni-MH/Ni-Cd rechargeable batteries, independent charging slot, can charge different size batteries freely.
• Discharge Function: Press the blue button to discharge the battery. LCD displays "DISCHG" , at the same time, 1-4pcs Ni-MH Ni-CD batteries automatically turn to discharging mode. The charger will resume charging mode after completion of discharge.
• Fast Charging Speed than Other Name-brand: Charging the battery 2-4Pcs AA/AAA/C/D with the total current 2A. Less than 3 hours to fully charged the AA/AAA/C/D batteries, and less than 10 hours to fully charged the 9V batteries.
• Safe Assurance: Automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
• Constant Current Charging Mode: Protect the batteries against current fluctuation and keep using the charger safely.

User questions & answers

Question:	is this charger made in the USA
Answer:	No, China. I searched for a charger made in USA, but no luck finding one.
Question:	I just bought these with your charger and the batteries heat up so much that i cant touch them. Is that normal
Answer:	They will get warm, but not to the point where you cannot touch them. Are you using the EBL charger? That thing is a piece of crap. I bought one from Interstate Batteries, and haven't had a problem. The EBL charger kept telling me that the batteries (EBL as well) were not charging due to an error.
Question:	Should the batteries be charged prior to first use
Answer:	Being in the mobile DJ business, I never trust pre-charged batteries. I always charge them when initially received. All batteries had various levels of charge, yet none were 100% charged.
Question:	Are these Low Self Discharge
Answer:	In my experience with NiCad batteries, they should be fully discharged, before recharging them. NiCad batteries exhibit a "memory" https://www.google.com/search?q=NiCd+battery+charge+and+discharge+memory&ie=UTF-8

Product features

EBL 906 Upgraded Battery Charger

Compatible Models

Independent charging slot, can charge different compatible batteries freely.

For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D and 1/2 9V batteries.



Environment Conditions

Using Environment: Temperature: 0-40℃; Humidity:≤85%

Storage Environment: Temperature: -10-40℃; Humidity:≤60%



Work Temperature:

Surface temperature of charger≤60℃

Surface temperature of battery≤45℃

Reasonable Circuit Layout - Worldwide Usage

Patent Trickle Charge Mode

• Fast charge - NiCd/NiMH battery pack charger that provides 1Amp or 2Amp options. Quickly charge your battery packs; 1Amp is recommended for 1000-1800mAh packs, and 2Amp is recommended for any pack over 2000mAh.
• Universal smart charger - Charges battery packs based on automatic voltage detection. Charges your NiMH or NiCd battery packs that are 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
• Easy-to-use - A great airsoft battery charger or RC car battery charger with simple LED indicators for charging status. Green light for fully charged and red light for charging.
• Hobby battery charger - Power all your hobbies with one charger. Charge your NiMh/NiCd battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, standard Tamiya to Alligator Clips adapter.
• Tenergy safe - To give you peace of mind, Tenergy's chargers meet rigorous American UL 60950-1 safety standards. For added security, the charger also includes a temperature sensor to prevent over-heating while charging. Buy with confidence, your charger includes a 12-month warranty.

User questions & answers

Question:	what type of connectors does this have
Answer:	You will have to buy or make ends to convert to ic3 the charger does not come with ic3 plugs standard.
Question:	can this charge batteries with a mini connector
Answer:	Hi, it can discharge 1s battery.
Question:	I am getting a 12v cb radio, will i be able to hook this to the red and black (with the converter) and it will power the radio while i test it
Answer:	Yes, but it is better that you can set the parameter smaller than 10 amps, if the 10 amps is the full, because charging 10 amps in the long time, it won't be very good for your battery. And you can charge 2 different batteries at the same time, because dual battery charger.
Question:	Will this work for charging Fisher Price Spike the Ultimate Dinosaur battery pack? LH 130-2A51MC8HROT 9.6v, AA Size, 1300mAh
Answer:	Of course, it does.

• Fast charge - NiCd/NiMH battery pack charger provides 0.9Amp or 1.8Amp options. Quickly charge your battery packs; 0.9Amp is recommended for 900-1800mAh packs, and 1.8Amp is recommended for any pack between 1800mAh and 5000mAh.
• Smart charger - Charges battery packs based on automatic voltage detection. Use this rechargeable battery charger to recharge your NiMH or NiCd battery packs that are 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
• Hobby battery charger - Power many of your hobbies with one charger. Use this charger as a great RC cars battery charger or for battery packs in Airsoft, RC airplanes, and other remote controlled toys.
• Easy-to-use - Simple LED indicators for charging status; green light for fully charged and red light for charging. Includes standard Tamiya connector, standard to mini Tamiya adapter, and standard Tamiya to alligator clips adapter for more usability.
• Tenergy quality - Buy with confidence, Tenergy 9.6V Airsoft battery charger includes 12-month warranty and meets rigorous American UL 60950-1 and CE safety standards. Built-in protections on the charger guards against, short circuits, reverse polarity, and over-heating while charging.

User questions & answers

Question:	Where on Amazon is the banana clip adaptor that works with this thing? (One that works
Answer:	No this works with an air hose.
Question:	Can i recharge a 12v 2.3ah sla rechargeable battery for camcorder and medical devices with this charger
Answer:	Please add a few drops of oil prior to use. The air hose is not included.
Question:	i have a 9.6v 2000 mah battery what current would i use to charge it
Answer:	I've put a lot of T50 staples thru mine, including half inch. Don't see why 10mm would be a problem.
Question:	will this charge a 8.4v 1500 mAh large battery its got a big female end would it fit that
Answer:	Considering the cost, cast. They are nice shears for the price. The length does include the finger rest.

• Advanced fire-proof material has been apdoted to this EBL C808 charger - freely working for 2/4/6/8 AA/AAA Ni-MH/Ni-Cd rechargeable batteries.
• Globally charger with smart LED to show its charging progress, when LED lighting green means the battery is fully charged.
• Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
• Using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
• Constant current charging would protect the batteries against current fluctuation and keep using the charger safely.

User questions & answers

Question:	My 4 batteries were losing charge so I put them in the charger. The lights are green. Do they have to be completely dead for them to recharge
Answer:	If your batteries are a few years old (or have been over-charged routinely), they may have developed high internal resistance. When used in a photoflash unit, for example, they will give very slow refresh time since the terminal voltage is lower under load. But when you put them in a charger, the terminal voltage becomes higher due to charging current. So the EBL charger (which is not very smart) considers those batteries as fully charged, even through they are not.You should get some better quality rechargeable batteries (such as Panasonic eneloop) to use in your photoflash unit.
Question:	Can you charge different mAh batteries at a time? Lets say I have four 2000mAH and four 2300mAH batteries, do I have to charge these separately
Answer:	I would think they can be charged together. The mAh value simply is an indication of the length of time the battery will operate. It has nothing to do with out put current or voltage. The 2300 may take a bit longer to charge than the 2000, but I cannot say for sure that would be the case. I would put the 2000's together and the 2300's together. Don't put one size next to the other size.
Question:	How long does it take to fully charge batteries
Answer:	Charge time is determined by the capacity of the batteries divided by charging current. The charging current of EBL 808A is very low at 200mA. So to recharge a pair of 2800mAh batteries at 200mA will take at least 14 hours.
Question:	can it charge uneven amount of batteries (1, 3, 5...)? Can you recommend any charger to charge 3 batteries? AA or AAA
Answer:	This charger can only charge in pairs, but we do have some other chargers that can charge uneven amount of batteries, here are the links: 1. http://www.amazon.com/gp/product/B00KBQ7U102. http://www.amazon.com/EBL-Battery-Rechargeable-Batteries-Released/dp/B00OT7HSBO3. http://www.amazon.com/EBL%C2%AE-Universal-Discharger-Rechargeable-Batteries/dp/B00IHT2AUE/ref=sr_1_11?s=hpc&ie=UTF8&qid=1399165294&sr=1-11&keywordsYou can choose your favorite ,may it help you!

Product features

EBL C808 Model (Latest Version) Battery Charger - Upgraded

Compatible:

Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries)



How many batteries can be charged at a time:

2/4/6/8 AA or AAA batteries together at a time, need to charge batteries in pairs, do not charge uneven amount of batteries

4 LEDs show the status of charging, never charge 1 AA + 1 AAA together at 2 slots which are controlled by 1 LED

Reasonable Circuit Layout - Worldwide Usage

Patent Trickle Charge Mode

Details Shows Professional

Better Heat Dissipation

Heat dissipation design help the EBL 808 battery charger has a better function: overheat-detection to prevent over-charging.

• Best choice for rc hobby: The highligts of Melasta charger is to extend battery life, get more running time (VS fast charger) and increase safety.
• One charger for 2 types of rc batteries: Perfectly used for rc car nimh battery pack with standard Tamiya plug and HXT 4.0mm banana plug, voltage range from 2.4V to 12V.
• Slow charging, but very safe: Compared with fast chargers, Melasta charger solves the problem of overheating caused by excessive current during charging, it also avoids some safety hazards caused by overheating. But it takes about 10 hours for most of rc batteries( may vary by battery capacity), designed for long-lasting performance.
• Easy to use: No need to set charging mode, when battery plugged in, led light shows solid red is charging, solid green is fully charged. Note: don’t charge Lipo battery.

User questions & answers

Question:	Anyone used this on a hxt/redcat/banana style battery? the adapter shown in the picture is a female banana plug, hxt battery requires male
Answer:	Hi, it fits perfectly for the following linked batteries, https://www.amazon.com/dp/B08GXCZSYQ?ref=myi_title_dp https://www.amazon.com/dp/B07Y37XKJ5?ref=myi_title_dp https://www.amazon.com/dp/B08HHYMMT6?ref=myi_title_dp If you have any question, pls contact us by email, we will do our best to support you.

Product features

Specifications:

Input voltage: 100-240VAC, 50/60Hz, 0.2A

Rated output voltage: DC 2.4-12V

Rated Output Current: DC 800mA (2cells-6cells ); DC 500mA (7cells-10cells)

Operation temperature: -10-40℃

Storage temperature: -20-85℃

What you get:

1* Melasta RC car battery charger with Standard male Tamiya plug （This is a Standard Tamiya Male plug, NOT mini Tamiya Male plug.）

1* adapter cable from standard Tamiya to HXT 4.0mm banana plug

More Safe to Charge

Built-in short-circuit,over-temperature and over current protection to prevent the battery and charger from being damaged.

Advanced MCU to control the charging process, to ensure the battery can be fully charged and reduce overheating during charging.

Used negative delta voltage technology to Automatically terminated charging.

Portable and Compact Size

A compact design, small size, light weight, flexible and convenient to carry.

One Charger for 2 types of RC car batteries

• [WIDE COMPATIBILITY]: 18650 Fast Charger Is Compatible With All 3.7v Lithium Batteries And 1.2v NiMH / NiCd Aa Batteries. The Charger Will Automatically Recognize The Battery Type And Charge Independently.
• [DETAILED LCD SCREEN]: The Only Button "C" Of The 18650 Battery Charger Can Switch The Battery Charging Information Of Different Ports, And Can Display Charging Time/Charging Capacity, Battery Voltage, Charging Progress%, Battery Type, Charging Speed
• [SAFE AND ADJUSTABLE CHARGING SPEED]: Button "A" Can Switch 0.5a / 1a / 2a Charging Speed, Switch Between Slow Charging/Fast Charging As Needed, Smart Circuit Can Provide Short Circuit, Overheating, Overvoltage And Overdischarge Protection
• [CHARGING TIME EXAMPLE]: Battery Charging Time Is Eneloop 2500mah AA 1.5 Hours, Amazonbasics 800mah AAA 0.5 Hours (1 Ampere Fast Current), Flat Top 3.7v 3400mah Lithium Ion Panasonic Ncr18650b 2 Hours, 3.6v 2500mah Lithium Ion High Power Consumption Lg He2 1.5 Hours
• [LIGHTWEIGHT AND PORTABLE]: The 4-Slot Design Can Charge 4 Different Batteries At The Same Time. The Applicable Battery Length Ranges From 29mm To 65mm. It Is The Best Choice For Travel 18650 Universal Charger.

User questions & answers

Question:	What are the different charging currents? also, is it a micro usb power cable (or usb type-c
Answer:	The diameter of the battery is 18mm， the length is 65mm
Question:	I just put two 18650 batteries in and nothing happens. i press the 2 button on the front and nothing happens. What am I doing wrong
Answer:	The true power rating on these tested out at ~1600mAh per cell.
Question:	What is the max charging current for each slot? 2A
Answer:	Yes ,no problem I am using mine to charge genuine canon batteries.
Question:	How do I get this charger to read the mAh the battery has? Seems to only read how much it has filled, not how much it has altogether
Answer:	I have the eos rebel t7 and the very first eos rebel works in both very well no complaints

Product features

WBwissblue LCD-4 2A Fast Smart Universal Charger

• Specifications

Input: DC5.0V 2A

Output: Li-ion: 4.2V 2A*1 ; 1A*2 ; 0.5A*3-4

NiMH: 1.48V 0.5A *4

Telescopic length of battery slot: 34mm-75mm

Input plug: Type-C+Micro+lighting

Provided with integrated LCD display to monitor battery parameters including voltage ( V ), current ( mA ), time ( h ), capacity ( mAh )

• Compatible battery types

3.7V: Li-ion 10440 14500 14650 16340 17335 17500 17650 17670 18350 18490 18500 18650 18700 20700 21700 22650 22700 25500 26650 32650

1.2V: NiMH/ NiCD AAAA AAA AA

Charged Capacity/Charged Time

*Automatically Switch“Charging Capacity”/“Charging Time“ Information Every 7s

Battery Voltage/Charge Progress

*The Current Voltage Of The Battery

*Current Battery Charging Progress

Battery Information/Charging Current

*Independently Display The Current Battery Information Of 1/2/3/4 Ports

*Current Selection: 0.5A/1A/2A

*Battery Type: Li-Ion /Ni-MH Ni-Cd

Button Function Introduction

*Press The "A" Button To Switch Between 3 Current Speeds.

*Press The "C" Button To Switch The Display Between The Ports.

Safe Material/Portable size

The Shell Made Of Flame-Retardant Material，Durable and Safe

Portable 3.7in*4.7in Size, Become Your Travel Companion

Smart Circuit

The Circuit Controlled By The Smart Chip, Has: High Compatibility, Independent Charging Of Each Port, Reverse Connection Protection, Overcharge Protection, Overheat Protection, Segmented Charging, Providing Faster Charging Speed And Safety

2A Fast Charging

Universal Micro-usb Port, You Can Always Find A Suitable Cable

Amazon Basics 2000 mAh AA Rechargeable Batteries: 1.5 hours

3.7v 3000mah 18650 lithium ion battery: 1.7 hours

Product description

Conveniently charges 4 AA or AAA NiMH rechargeable batteries at the same time.3-5 hour charge time with auto shutoff to prevent overcharging and battery damage. Manufactured in China .The charger is equipped with audio and visual alerts. A red light means that charging has started, and you will hear an audible beep when charging begins. A yellow light appears when charging is 50 percent complete and charging is continuing. A green light means charging is complete, and the batteries are 100 percent full. You will hear an audible beep upon completion. If a bad battery is detected, a red X will illuminate, and the charger generates a repetitive audible beep upon detection. Audio and visual alerts:Red light - Charging has started; audible beep when charging begins. Yellow light - Charging is 50% complete and charging. Green light - Charge is complete and batteries are 100% full; audible beep upon completion. Bad Battery Detection Alert - If a bad battery is detected a red ‘x’ will illuminate; repetitive audible beep upon detection

• Charges 2 or 4 AA or AAA NiMH rechargeable batteries at once (4 AA batteries included)
• State of the art Charge Status Indicator system visually and audibly alerts on your batterie's charge levels
• Get a full charge in 4 hours with the rapid charging power of Recharge Pro (times may vary by NiMH battery)
• Auto safety shut off and overcharge protection features prevent damage from overcharging, helping to maximize battery life
• Built in, fold out plug design allows you to easily store the Pro Charger Battery Charger when not in use
• Compatible with all AAA and AA NiMH rechargeable batteries (Energizer Recharge batteries recomillimeterended)
• The world’s No.1 recharge brand (according to market survey data)
• Note: For any troubleshooting steps please refer product user manual in technical description

User questions & answers

Question:	Can you use the charger on the Energizer Power Plus NiMH AA Rechargeable Batteries rated at 2300 mAh
Answer:	You could if it actually worked. This charger stopped working within a month. I returned mine. Also you might want to consider more battery slots. 4 seems ok at first but now I got 1 with 8 slots and I think it's too small.
Question:	Does this charger only charge in pairs? Is it possible to charge 1 cell (at a time) with this charger
Answer:	I have owned this. The universal charger WILL charge batteries individually. There are 4 charging 'points' and you can choose to put one small battery (AA or AAA) in one point. Of course, you can also put two small batteries in each point to get the full 8-at-a-time figure. This also only applies to the small batteries. Cs and Ds are charged individually in each point, so their max is only 4 at a time total.
Question:	Can this charge aa and aaa at the same time
Answer:	Yes. AAA on one side and AA on the other. Not on the same side at the same time.
Question:	Can i use Energizer CHRPROWB4 Pro Charger with 240 volts 50 Hz AC input
Answer:	Hi Nikhil Singh, over at the Energizer web site they have some additional information. Look under batteries and then battery chargers. You can download the user manual for this model. The user manual clearly indicates that 240V 50Hz power is OK. The only problem you will have is the plug. The two-prong plug is designed for U.S. outlets. Of course, any plug adapter will solve that problem.Basically, the answer is yes.

Product features

Delta V Auto Shut-Off

The Pro Charger automatically shuts off the circuit when batteries are fully charged.

Overcharge Protection

Prevents against overcharging, which can shorten the life cycle of your rechargeable battery.

Maximizes Battery Life

These safety features make sure that you get the most of out of your battery performance.

Product description

An Amazon Brand

• 4-hour Ni-MH battery charger with USB charge port
• Recharges 2 or 4 AA / AAA Ni-MH batteries at a time (batteries must be charged in pairs)
• When charging only 2 batteries, insert the batteries side by side in the left or right side of the charging terminal.
• Protects against wrong polarity charging and over charging
• Retractable AC plug; slim profile; ideal for travel
• Note:Priority charging for USB port
• Built-in switching power technology for worldwide use (100-240 V AC)

User questions & answers

Question:	can i charge the batteries with a portable battery using the usb
Answer:	According to the instructions if you have anything charging using the USB plug in then batteries will not be charged until you are finished charging with the USB plug. In other words you cannot use both at the same time.
Question:	Can i use this charger to charge only 2 batteries or i need to put batteries in all 4 slots
Answer:	It's two left two right or all 4 not sure on mixing sizes if you have 3299 USB then there is a pdf of the instructions 4227.pdf in Google should get you there. https://www.batteryspace.com/prod-specs/4227.pdf&ved=2ahUKEwjolKTupIHfAhVpw4MKHQAnAfMQFjAFegQIBBAB&usg=AOvVaw1xyiATwKih9nPrJvkC-Od-&cshid=1543758640486
Question:	Can this charge an odd number of batteries
Answer:	No, this AmazonBasics charger can only charge even number of batteries. That means 2x AA, 4x AA, 2x AAA, etc. Also, you cannot group 1x AA and 1x AAA as a pair.
Question:	I threw my manual away. can anybody tell me what the difference is between solid red leds and blinking red leds
Answer:	Solid red indicates that the batteries are charging. Blinking red LED means at least one cell is damaged and cannot be charged safely. Damaged cells should be disposed of promptly and properly.

Product features

Versatile Charging

The unit plugs into an AC wall outlet, and provides versatile charging space for both AA and AAA rechargeable batteries as well as USB devices.

Prevents Overcharging

The unit recharges 2 or 4 AA or AAA batteries and features wrong polarity protection and a cut-off function to prevent overcharging.

Accommodates USB Devices

The versatile battery charger comes equipped with a USB port (maximum output 500 mA) for charging a smartphone, PDA, iPod, or other handheld device.

Worldwide Use

Featuring a flip-down plug with a slim profile, the charger is travel-friendly and includes switching-power ability for worldwide use (100 to 240 AC).

Product description

Before place order, Please NOTE: Only Nimh and Nicd battery Chager.





new lead published, please refer ASIN: B07DBQ4CYW

szwisechip is professional charger designer over 10 years, our solution for 1, 2, 4, 7 channel charger wildely used by a lot of UK and German company. We also can make large power charger. 200W, 1000 W for example



We have a serious reminder that this charger is not suitable for lithium，Lipo battery and lead-acid (Pb) battery charging！！！

Feature:

1. Nickel-cadmium, NiMH batteries pack charger for radio-controlled model cars, boats and aircraft.

2. Support 3-9 series battery pack.

3. Working voltage: 110-240V AC @ 50-60Hz Hz

4. Protected against overload and short-circuit.

5. A charge indicator LED is provided for the charge output.

6. 1 A large current charge. After detect a Delta-Peak. Current will down to 100mA to maintain the battery.





The charging progress

1. Locate the mains plug attached the Charger and connect it to a mains socket (110~240 V AC @ 50-60 Hz).The red LED should not flash; this indicates that the charger is ready for use.

2. It is essential to check that the polarity of the battery connector and the charge lead connector is correct (see Figs).

3. Connect the discharged NiMH battery pack to the charge lead attached to the charger.

4. The corresponding red LED will now light up to indicate that charging is in progress at that output.

5. When LED lights up green, the battery connected to the output is fully charged.The pack is now fed a small trickle charge current.Disconnected the charged battery from the charge output.

6. If the battery is still cool and the calculated charging time is not reached, the battery may have a “false” peak. In this can start charging the battery again.”False” peak happen mainly with old or bad NiMH -batteries.

7. Disconnect the Twin charger from the mains socket.

• AUTO STOP SMART BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 3-9 cells(3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V). The battery is automatically powered off when fully charged, LED turn green
• TRICKLE CHARGE- The maximum charging time is 6 hours. There is trickle current after the power is 100mA. Fast charge for NiCd/NiMH battery pack.
• HOBBY BATTERY CHARGER- With Delta Peak detection function, at the same time can eliminate the memory effect of the battery. Power all your hobbies with one charger. Such as battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, JST, T plug, JR FUTABA, MCX, MCP X, TX 5.5 X 2.5
• 3.6V-9.6V 10.8V NiMH/NiCd Battery Packs Hobbies For Airsoft Batteries
• SZWISECHIP WARRANTY - The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence, this compact battery charger is compliant with the high standard set forth by CE certification and also includes 12-month warranty.

User questions & answers

Question:	Does this charge a 8.4v 3000mah nihm traxxas battery
Answer:	Appeox 56
Question:	Does this charger support a (3) aa ni-cd pack totaling 3.6v with 500mah capacity? in your photo, what type is the red female connector
Answer:	No
Question:	Does this charge the red cat connector batteries
Answer:	3 1/2 inches. These are great scissors
Question:	Is it 220v
Answer:	Made in China

Product description

Charging time:

1-8 pcs 2100mAh AA recharger batteries:It takes about 10 hours to fully charge

1-8 pcs 1000mAh AAA recharger batteries: It takes about 4.8 hours to fully charge



Input:DC 5V 2A

Output:1.4V 250mA



Precautions:1. It is forbidden to charge the battery that is not rechargeable. 2. Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger 3. Keep the charger in an empty Place when charging



Package:1 x POWEROWL battery charger

1 x user manual

1 x Micro USB charging cable(No AC plug)

• POWEROWL smart charger passed US safety certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator
• Scientific and reasonable battery charging position design, high quality materials effectively protect the battery from normal charging
• Charge any number of AA AAA rechargeable batteries to make your charging easier
• With a USB input interface, you can use a laptop, car charger, mobile phone charger, etc. to charge the battery
• AA AAA batteries charger uses trickle charge to extend battery life and charge up to 99%

User questions & answers

Question:	This charger input 220v
Answer:	This kit is manufactured in China.
Question:	Can you charge any brand
Answer:	DCB115 is what came in my package; which is a great charger.
Question:	Can this charger charge duracell and energizer rechargeable batteries or does it only charge powerall rechargeable batteries
Answer:	Yes, you may use any DEWALT 20V battery with this charger.
Question:	What does it mean that you shouldn’t charge pairs? Does it mean don’t charge just 2 at once? I thought you could charge any number of batteries
Answer:	It's 1 battery, 1 charger that charges only 1 battery, and a bag.