13 best tv lamps

• Voice Control: NiteBird 9.2 feet TV strip lights can be voice controlled. Free your hands, build up a smart home lighting system. Please note that our light strip is compatible with 2.4GHz network only
• APP Control: RGB bias strip light can change colors(no white light), brightness, multiple scene modes via app from anywhere.
• Music Sync: The TV backlight built-in advanced sensitive mic creates romance, relaxation, and party ambiance.
• DIY Length: Total 9.2 feet (1x 9.2 feet) long strip light is suitable for 32 to 60 inch screen.
• Easy Installation: 3M adhesive tape on the strip for a firm fit, great for TV/gaming decor.

User questions & answers

Question:	i wanna know if can add them to the other ones
Answer:	Its just the bulb It was all we needed for our Tv
Question:	Cannot connect it to the WiFi, what should I do
Answer:	My tv is a Mits. model WD-73833 & it fits & works just fine however I couldn’t say with certainty that it would fit yours exactly, but if there’s not much difference between the two tv models, it might fit. Hope this helps b
Question:	Does it support BlueTooth
Answer:	yes it has the complete housing. Aftermarket cheaply made. However, the bulb failed to illuminate when correctly installed in my set. The bulb and housing were reminiscent of the cheaper models I had previously purchased. I too have a green tint issue.
Question:	Does this come with a remote control
Answer:	For your particular television model the bulb listed below is what fits your television. Model#:KDS-R70XBR2 LampID:XL5300

Product features

How to Use Alexa Echo and Google Home?

Step1: Connect your Echo dot with Amazon Alexa, download Gosund APP.

Step2: Log in your Amazon Alexa, choose"Skill" then search"Gosund" and click "Enable"

Step3: Input your account and password of Gosund

Step4: After Alexa is linked to Gosund, and make sure your strip light has added in the APP, you can now control the light via Echo.

How to control it with phone?

Step 1: Download the Gosund APP and keep your phone connected to 2.4G WiFi (5G is not supported)

Step 2: Open the App, Add Device>Lighting>Strip lights

Step 3: Choose the "Other mode-AP mode" on the upper right corner

Step 4: Press button for 4-5 seconds, until you find its indicator light slowly flicker

Step 5: Entering your WiFi password and begin to connect

How to control it with iPhone Siri?

1. Open APP, Click Tap-to-Run., then click the symbol “+” in the upper right.

2. Select your scenes and device strip light, then select the command you need. After done you can see the command you need has appeared in the interface.

3. Click “Add to Siri” in the lower right, then record your command. For example, you can say: “Open Light”

4.Now you can control the light strip via Siri. Say “Hi Siri, Open Light”, The light strip will be turned on.

How to use controller to control it?

You can also directly use controller to control the light strip.

1. Press the button once to turn on the light strip or change the color.

2. Press the button for more than 2 seconds and less than 6 seconds to turn off the light.

3. Press and hold for more than 6 seconds to adjust to flashing mode.

Sync with Music

The TV strip lights can detect all kind of music, and spectrum with light and colors adjusting automatically based on the music

Brighter and Colorful

DIY 16 million colors, you can choose the color suitable for TV programs. Give you a brighter and more colorful TV viewing experience.

8 Different Scenecs

There are 8 different scenes that satisfy your various needs. It can also decorate your bedroom, ceiling, stairs, kitchen, porch, desk.

• 💡PERFECT SIZE LOOKS GREAT WITH ANY DÉCOR:61inch Floor Lamp has a classic design and fits perfect in any room from modern to traditional decor. It’s simple yet elegant design makes it easy to place in any room of the house. in an authentic metal frame has a PERFECT TWISTING TOWER MORDEN DESIGN which can makes the room feel larger perfectly with the warm tone of the LEONC lamp’s illuminated, textural lamp shade. The overall look and feel of this lamp will make you feel warm cozy in any room
• 💡BEAUTIFUL WARM LIGHT ATMOSPHERE: The Shine of the Teyvek Dupont is very gently and comfortable on the eyes.The average height of LED bulb gives even light and builds a Warm,Romantic atmosphere. An alternative to unpleasant overhead lights, the Lamp provides soft yet plentiful room lighting to enlighten your indoor space. With LEONC’s Teyvek Dupont decorative shade, you’re free from the glare of overheads or exposed bulbs.family will feel right at home with this comfortable lighting.
• 💡💡FITS EASILY NEXT TO ANY ROOM : Easy to Assemble&Clean within 15 minutes without any tools,experience recommend two person assembly;It's easy to be cleaned with a dust cloth, No viscose, All recyclable Creative lamp is very lightweight, weighs only 3.7 pounds,Stands just OVER FIVE FEET TALL so that easy to move around to where light is needed most in your room.Lamp has a weighted 4 Steel Foot structure that prevents tipping,convenient to use on/off pedal switch allows you to easy tap by foot
• 💡MULTI-COLOR LIGHT: Turn on one or both bulbs by remote controller, you can choose any color from RGB colors of the smart bulbs, red, green, blue, warm white or any color mixed out by them. It's also dimmable, you can set the comfortable brightness in need. When the bulb is set in one of dynamic color modes, You will find very fantastic and funny at your party when the lamp’s bulbs are set in different dynamic color mode!

Product features

Package Included:

• 1 x lampshade
• 1 x supporting tubes and electric appliances suite(tube A,B,C,D,E)
• 1 x the accessories bag (the ball screw pipe×1, hexagonal screw pipe×1, spring×1, gasket×1, foot pole×4),
• 1 x 2.4G wireless remote controller(Powered by 2*AAA, batteries not Included)×1,
• 2 x RGBW LED smart bulb(9W)
• 2 x RGB smart bulbs
• 1 x Remote Control
• 1 x Manual

WHAT TO KNOW

The Floor Lamp weighs about 3.95 pounds. Its total height is 5.1 feet, 2 inches. The table top rests at 62 inches from the ground, and measures 10.2 x 10.2 inches.

The shade measures 10.2 by 10.2 inches. It Easy to Clean&Easy to Assemble within 15 minutes without any tools，such like screwdriver

The lamp is operated easily with thefoot-step switch near the socket. The power cord is over 5 feet long. The lamp works with 110v - 220v outlets; you would just need to use a plug adapter to use it outside of the US, as the plug is made to fit standard US AC outlets & UL certification

Choose any color from RGB colors of the smart bulbs, red, green, blue, warm white or any color mixed out by them

With technology always on the move, we're working to bring the best and brightest to everyone. LEONC can works with Alexa and smart home devices, but it needs to be connected to a smart plug to work that way. If you do not already have one, you will need to purchase one separately.

Once you have the LEONC set up and the plug connected to your smart home device, you leave the lamp in the on position and let the technology do the rest.

Lamp Color: The lampshade itself is white. When lighted up with CFL bulbs (included) in 2700K, the lamp is yellow. When lighted up with RGBW LED smart bulbs (included), the lamp is multiple color or warm white.

Remote control: 2.4GHz wireless remote controller with long range and easy to operate.

2.4G high rf wireless technology signal even penetrate through thick wall.that means you don't have to put remote with lamps in same room within 30 meters,You can install anywhere in your room and control lamps in another rooms sensitive.

Match code:

• 1. Use the wire foot switch, power off the lamp lights off for 1 minute;
• 2. Use wire foot switch energized light bulb , light bulb light within 3 seconds, short press the remote control group 1/2 turn on the light 1 times, then the light bulb corresponding to flashing 3 times, the pairing is successful.

Clear code:

• 1. Use the wire foot switch, power off the lamp lights off for 1 minute;
• 2. The use of wire foot switch power-on light bulb, lamp light within 3 seconds, press the remote control group 1/2 turn on the lights 5 times, then the light bulb corresponding to flashing 5 times, Clearing the code is successful

A PERFECT TWISTING TOWER MORDEN DESIGN

The floor lamp has a twist tower shape, with WHITE COLOR Lamp shade and nickel metal poles.

Taking remote to turn your bedroom lights on before you leave the living room,So never worry you or your kids come to a dark room.You almost can control lamps in your house anywhere,don't have to go to the lamp's room and point the remote at the spotlights.

NOTE：

According to recently receive customer feedback “assembly impossible; shade wrinkle;lamp not straight;impossible to put rod into spring etc..” floor lamp is complete work well,Only please read the Manual step by step before assembly ,please NOTE assembly TOP UP RING SPRING FIRST（instructional diagram 8,9,10）then LAST PART DOWN RING（instructional diagram 12,13,14）If the opposite,assembly reversed Installation process will Cause Top ring damage and top ring pop up.if pop up，please do not Forced return back，Process returns Figure 7 reinstall .（Final Attention：instructional diagram 11-1,11-2 Spring position）

Product description

PANGTON VILLA Led Strip Lights for TV

• Light up every side of your tv - 78. 7 inch 5050 led light strip for 40-60 inch tv
• Led tv lights can improve image clarity
• 24 key remote:16 color, dimmable 4 modes. Control distance 19. 6 Feet-26. 2 Feet
• Install procedure-double sided adhesive tape Installation, we made the mark on the light strip, just connected it according to the mark
• Working voltage: The product is powered by dc 5 volt tv usb interface.

User questions & answers

Question:	I lost my remote do I just buy another remote or buy a whole new set
Answer:	Yes, XL-2200 is the correct replacement lamp for KDF-E55A20
Question:	How many modes does it have
Answer:	SP06-01472A fits this model
Question:	Can I control more than one set of lights and control them all with one remote? I want to know because I want to run it behind my tv and under my desk
Answer:	I do not know but I would suggest removing the bad lamp and ordering another of the same number as stamped on yours.
Question:	Really looking to get these for my gaming monitor but there is no USB port on my monitor. What can I do
Answer:	If you got it from amazon get return it to them as long as it's in the warranty time. Amazon is a great company and will help anyway they can.

Product description

Molgoc is a professional projection lamp manufacturer, founded in 2002.We have been providing cost-effective projection lamp products.Happy shopping experience for customers. 

 Part number: 915B403001

Compatible machine model: Mitsubishi WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD-65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737

Application:Family Television  Entertainment 

 Warranty: 180-day

The projector lamps are completely covered under our 180-day warranty, which protects against any defective products.  Brand New lamp with housing, top quality with high brightness, lamp life exceeds 2000 hours, QC test of all projector lamps.easy to install.

Warning

To reduce the risk of personal injury, do not drop the lamp module. The bulb may shatter and cause injury if it is dropped. Customers’ satisfaction is our top priority. If meeting any problems before or after purchasing, please contact me freely any time. It is our honor to serve you.

Molgoc is the only Authorized seller of Molgoc Products, focusing on projector lamps for a long time. Well Customer Services, Buy with confidence.

• Molgoc Professional solutions is an MA132W replacement that provides the best picture quality, brightness, and lifespan.
• with premium housing,minimize installation time to make sure your device is back in action quick!
• Compatible with the following Television Models: WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD-65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737 DLP TV LAMP
• Installation and Security: You will find it is quite easy to install it into your TV as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your TV when you install it.
• Quality assured, Professional lamps with housing come with a 30 day refund warranty or a 180 day replacement warranty， Refundable issue,please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

Product description

Brand New Replacement Lamp with Housing for Mitsubishi Projectors

Works with the following models: WD60638, WD60738, WD65638, WD65738, WD65838, WD73638, WD73738, WD73838, WD82738 WD82838, WD60C10, WD65C10, WD73C10

• Rear projection TV Accessories 915B441001 FOR Mitsubishi
• Bulb With The Housing
• Used in the following TV models: 915B441001 WD-60638 WD-60738 WD 60638 WD-65638 WD 65638 WD 60738
• Brighter & Sharper Picture

Product description

Molgoc is a professional projection lamp manufacturer, founded in 2002.We have been providing cost-effective projection lamp products.Happy shopping experience for customers. 

Part number: 915B403001

Compatible machine model: Mitsubishi WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD-65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737.

 Application:Family Television  Entertainment.

Warranty: 180-day 

The projector lamps are completely covered under our 180-day warranty, which protects against any defective products.  Brand New lamp with housing, top quality with high brightness, lamp life exceeds 2000 hours, QC test of all projector lamps.easy to install. 

Warning 

To reduce the risk of personal injury, do not drop the lamp module. The bulb may shatter and cause injury if it is dropped. Customers’ satisfaction is our top priority. If meeting any problems before or after purchasing, please contact me freely any time. It is our honor to serve you. 

Molgoc is the only Authorized seller of Molgoc Products, focusing on projector lamps for a long time. Well Customer Services, Buy with confidence.

• Molgoc Professional solutions is an MA132-150W replacement that provides the best picture quality, brightness, and lifespan.
• with premium housing,minimize installation time to make sure your device is back in action quick!
• Compatible with the following Television Models: WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD-65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737 DLP TV LAMP
• Installation and Security: You will find it is quite easy to install it into your TV as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your TV when you install it.
• Quality assured, Professional lamps with housing come with a 30 day refund warranty or a 180 day replacement warranty， Refundable issue,please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

User questions & answers

Question:	How long did this bulb last
Answer:	Do you mean connecting multiple light strips together? Yes, but you don’t need to cut, just add them to the APP and use the group control function. You can control one or more light strips arbitrarily.
Question:	is this the actual replacement bulb for a tv? and it is guarenteed for 180 days
Answer:	1. Make sure your WiFi is a 2.4GHz network. 2. Put the light strip as close as it could be to the router when you connect it to the network. 3. Make sure your item is on the pairing mode when you try to connect it to the network. 4. Contact the customer service and they will help you.
Question:	does it work on mitsubishi wd
Answer:	I’ve only had mine for a few weeks, but I can’t find any Bluetooth options just wifi
Question:	please vote: is it dimmer or brighter than previous bulb ? (please add your reply to the vote count). says only 120 watt, others are 180 watt
Answer:	No, it does not come with a remote control. This light strip is App controlled, you need to download an App first.

Product description

Compatible Mitsubishi TV Models：

WD-60738, WD-60C10, WD-60638, WD-65638

WD-65738 , WD-65638, WD-65838, WD-65C10

WD-73638, WD-73738, WD-73838, WD-73C10

WD-82738, WD-82838

• Lamp Part Number：915B441001
• Brand new high quality replacement bulb,Brighter & sharper picture
• Including 90 days of quality assurance, with many years of production experience and excellent technology
• Simple and easy to install.With housing，bring the device back to normal operation very quickly
• Compatible TV Models:WD-60738, WD-60C10, WD-60638, WD-65638, WD-65738 , WD-65638, WD-65838, WD-65C10, WD-73638, WD-73738, WD-73838, WD-73C10, WD-82738, WD-82838

Product description

Go lamp is Ultra bright LED lamp adds light anywhere. All the Light you need without a cord. Perfect for reading books, light up outdoor grilling, use for power outages, camping and anywhere you need light.

• Cordless LED lamp. Touch on/off.
• Internal lithium power cell.
• One charge lasts weeks. 3 levels of brightness.
• Ultra flex arm – light in any direction. Charges via USB.
• Weighs less than ½ lb. LED lights are cool to the touch.

User questions & answers

Question:	How many lumens
Answer:	please contact us via amzon , we will resend a new remote to you .
Question:	does this run on batteries and if so is it aa
Answer:	4 modes. They are listed as flash, strobe, fade, and smooth but in reality you get 2 modes, and the same modes again but slower. Flash - cycles through 16 colors Strobe - same as Flash but more time between color changes Fade - cycles through 16 colors but fades between color transition Smooth - same as Fade but more time between color changes
Question:	I placed 3 aa energizer batteries in lamp, but will only come on, if in usb plug
Answer:	Yes. I have the light sets on 2 different tvs and I am able to control them with 1 remote
Question:	Does it come with a power cord
Answer:	You could always get a usb extension cord and just plug it into the tower as well, that's what I did.

Product description

MaiDuoTech Lamps - Premium quality wick, high brightness, long life replacement projector lamp



HD Images

New Generation A+ Lampwick Inside Bare Bulb Make It More Illustrious And Clear Enough with The Same Original Functioning



Easy to Install

1, Use a screwdriver to remove the screw from the cover.

2, Push up and remove the cover.

3, Remove the lamp protection film .

4, Remove the screw that secures the lamp module.

5, Disconnect the lamp connector from the projector. Lift the handle so that it stands up. Pull out the lamp module by force.



Warning

To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

• MaiDuoTech Mitsubishi 915B403001 Premium Quality, High Brightness, Long Life Replacement Projector Lamp, Easy to install
• The Professional Replacement Lamp Provides Clear And Bright And Sharp Pictures For Home Theater, School Presentation, Business Meeting
• MaiDuoTech is Responsible For All Replacement Lamp With 180 Days Warranty And 30 days refund
• MaiDuoTech Replacement Lamp Fit Projector:Mitsubishi WD-60735, WD-60737, WD-65737, WD-65735, WD-73C9, WD-73737, WD-65C9, WD-73735, WD-82837, WD-65736, WD-738
• All Lamps Will Be Test Before Delivery, All Messages Will Be Respond Within 24hours, Excellent Return Service And Friendly Customer Service

Product description

- CARSN Replacement Projector Lamp - a professional projector lamp manufacturer.

- High brightness,long lifespan, reasonable price bring you and your family to experience a better entertainment.

- CARSN team's mission is, supplying qualified products to market demands and providing best service to client 100% satisfaction. We wish to strengthen cooperation and have splendid future with every client!

Notes:

Reset the lamp timer if you have replaced the lamp.

Parameter:

Bulb model: 915B441001 / 915B441A01

Compatible Projectors: MITSUBISHI WD-60638 MITSUBISHI WD-60638CA

MITSUBISHI WD-60738 MITSUBISHI WD-60C10

MITSUBISHI WD-65638 MITSUBISHI WD-65638CA

MITSUBISHI WD-65738 MITSUBISHI WD-65838

MITSUBISHI WD-65C10 MITSUBISHI WD-73638

MITSUBISHI WD-73738 MITSUBISHI WD-73838

MITSUBISHI WD-73C10 MITSUBISHI WD-82738

MITSUBISHI WD-82838

Warranty:

1). CARSN Projector Lamps are with 120 days warranty;

2). During warranty period, CARSN team offer technical support through all the after-sales service.

• ✓CARSN Lamp-superior light output maximizes image quality to reduces visual fatigue.
• ✓CARSN Lamp's lifetime approximately 2000 hours and 120 days warranty.
• ✓It is easy and quick for your installation to make sure your device is back in action.
• ✓Rigorous test before delivery&Professional customer service support.
• ✓Compatible projector:for MITSUBISHI WD-60638 WD-60638CA WD-60738 WD-60C10 WD-65638 WD-65638CA WD-65738 WD-65838 WD-65C10 WD-73738 WD-73838 WD-73C10 WD-82738 WD-82838

Product description

Mitsubishi WD73640

• WD73640

Product description

Mitsubishi Replacement Lamp with Housing and Original Philips Bulb for WD-60735; WD-60737; WD-6

• Lamp Part Number: 915B403001; 915B403A01; BLX5017-15; PHI/915B403001
• Wattage: 150
• Lamp Life: 6000 (normal) hours
• This lamp is sold with Module and Housing included. We use OEM/Original Philips Bulbs in all of our lamps
• This lamp is sold with Module and Housing included. We use OEM/Original Philips Bulbs in all of our lamps

User questions & answers

Question:	I have a mitsubishi wd-65838 and would like to know which is the best replacement lamp with housing for this model
Answer:	this bulb is suitable for the following models of the Mitsubishi brand:WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD-65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737. Warranty 180days.
Question:	Wrong bulb per your add
Answer:	Cannot be used in mitsubishi wd 73642. Other models of Mitsubishi can be used as follows: WD-60735 WD-60737 WD-73737 WD-73C9 WD-65C9 WD-65735 WD-73735 WD-60C9 WD-82837 WD-65736 WD-73736WD -65837 WD-82737 WD-73835 WD-65C8 WD-73837 WD-73C8 WD-56737
Question:	Does this include the mounting screws
Answer:	The old lamp will become darker if it is used for a long time, so it will be brighter than before when it is replaced with a new one. our lamp is 132 watt. Mitsubishi TV the lamp power supply is only 132 watt, so it will not be brighter if it is replaced with 180 watt.

Product description

Fits Mitsubishi TV models WD-60735 WD-60737 WD-60C8 WD-60C9 WD-82737 WD-82837 WD-56737 WD-65735 WD-65736 WD-65737 WD-65835 WD-65837 WD-65C8 WD-65C9 WD-73735 WD-73736 WD-73835 WD-73C8 WD-73C9 WD-73737 WD-73837

• Lamp Part Number：915B403001，Atekua is the only sales store for Tawelun 915B403001 bulbs
• Brand new high quality replacement bulb,Brighter & sharper picture
• Including 90 days of quality assurance, with many years of production experience and excellent technology
• Simple and easy to install.With housing，bring the device back to normal operation very quickly
• Compatible TV models:WD-60735,WD-60737,WD-60C8,WD-60C9,WD-82737,WD-82837,WD-56737,WD-65735,WD-65736,WD-65737,WD-65835,WD-65837,WD-65C8,WD-65C9,WD-73735,WD-73736,WD-73835,WD-73C8,WD-73C9,WD-73737,WD-73837