12 best monster coax splitters

Product description

BAMF splitters were designed by 2 cable technicians who were frustrated by the lack of access the general public had to high quality components for their cable setups. BAMF splitters were built to give an improved experience for the end user. Please Read further to see more specific specs! VERY HIGH QUALITY, solid built 2-way coax cable splitter designed for CATV or satellite services. Used frequency spectrum 5-2300 MHz for optimal performance on all devices. Whether you are using cable (internet,TV or phone), satellite TV or antenna system we have you covered. Works great with MoCA systems. Zinc die-cast housing with nickel plating, f-type connector, low insertion loss, high isolation, max passing current 0.5A, DC 24V, multi-outputs, and bandwidth of 5-2300MHz. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with coaxial connection.

• 5-2300 MHz (2.3GHz) RF bi-directional digital coax/coaxial cable splitter for CATV, satellite and MoCA configurations
• Internal circuit board for better reliability/durability
• Low signal loss of 3.5db on each output port improving performance and speeds
• All ports are power passing for easy connection to satellites, amplifiers, and cameras
• High shielding structure lowers digital noise and improves signal quality

User questions & answers

Question:	How exactly does this work & do i need it for my Bolt
Answer:	Should work just fine
Question:	Can I use this to split one Directv signal into two? In other words, get the same dtv signal on 2 different tvs
Answer:	Thank you for the question. You can use the splitter outside, but it's recommended to use it in a house box or premise box to keep from getting water inside. Grounding is recommended, however, the splitter will work without grounding. The purpose is to keep your wires from damage, and potential fire damage in the event of a surge.Keep in mind, your cable system only needs 1 grounding point. So, if you have an established ground before the 3 way that's in place, that's all you need. (Don't add a 2nd ground) If you are unsure about grounding, it's best to have a professional look at it.If you have other questions, feel free to contact us directly through the buyer messaging system.Thank you
Question:	Will this splitter work to connect coax cable to modem and connect to tv for cable at the same time
Answer:	You don't need to connect anything to the input if you are just using the splitter for MoCa, but we recommend terminating the port with a 75 ohm terminator.
Question:	Someone els has asked this question and I'm curious what the outcome was ??? Can you use this in reverse to connect two antennas to one coaxial cable
Answer:	No. What you are looking for is called a diplexer, and you will need two to accomplish what you are attempting to do.

• ⏪5-2500MHz (2.5GHz) Coax Splitter:Tolmnnts digital coaxial cable splitter is designed for CATV, Satellite TV,Antenna System, Internet and MoCA Configurations.
• 🔼Premium Quality Coaxial Splitter: Zinc die-cast housing with nickel plating and F-type connector, which are weather resistance, rust-proof and more stable.Get your premium quality, long life span.
• 🔼Low Signal Loss:Internal circuit board,high shielding structure for better performance. Which can lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
• 🔽Easy to Use:All coaxial ports are power passing, which can make your satellite connection much easier.
• ⏬What's Included in the Package:1x Coaxial Splitter, 2x Screws,2x Screws Plug,1x User Manual .

User questions & answers

Question:	Will this splitter work to split the cable signal between cox contour and a cable modem
Answer:	Yes it is. You can read it on the description: 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa. Also, it says ALL PORTS POWER PASS.
Question:	Would this allow inserted dc on one port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	Will work fine
Question:	Will this coaxial splitter work outside
Answer:	Not to familiar with types of satellites out there but I have the one you put in your window. So I run a cable in to BAMF 8 way and it gets distributed through out the house. I can watch different stations on different TVs. Please note that my satellite cama with an amplifier, I noticed that it helps a lot to push the signal through out the house.
Question:	Is it possible to connect two antennas to one tv with this splitter
Answer:	Yes but you will need to split at the main source. A cable splitter divides the original signal into equal segments. An 8 way splitter will give you 1/8 of the original signal to each outlet. Use the smallest splitter possible for your needs.

Product description

Brand Name: Monster Cable

Sub Brand: Just Hook It Up

Product Type: 2 Way Coax Splitter

Impedance: 75 Ohm

Frequency: 900 mHz

Number in Package: 1

Color: Gold

Application: Indoor/outdoor use

Connector Type: F Type

Packaging Type: Carded

Cable Type: Coax

Discovery ACC, CON, NBR, SUP, EXP

Product description

Expand your entertainment viewing options with the GE-branded Pro™ Digital 2-Way Coax Splitter. Whether you access your entertainment through a TV antenna, cable or satellite subscription or other device, this handy splitter lets you easily deliver the digital signal to multiple TVs for the best in high-definition entertainment. This coax splitter is designed to evenly distribute one digital signal to support TVs, DVRs, Blu-ray™/DVD players, cable boxes and more. It transfers audio and video for all brands of electronics using F-type connectors and is capable of handling frequencies of 5-2500MHz. Installation is easy. Simply use the clearly labelled, screw-on input and output jacks. Screw the coax connector from the signal source that you wish to distribute, such as your TV antenna, cable or satellite connection, onto the coax jack labeled “in” on the splitter. Screw in the coax connectors for the cables running to the TV or other device to any of the coax jacks labeled “out.” The compact design fits easily in tight spaces and integrates seamlessly with existing hardware. Experience greater entertainment with the GE-branded Digital 2-Way Coax Splitter.

• MULTI PURPOSE – This digital coax splitter is designed for use with HD TV signals, Satellite TV, and High Speed Internet Modems as well as Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
• FREQUENCY RANGE – Distributes a digital signal of 2.5 GHz (5-2500 MHz) frequency range
• 2 OUTPUTS – Splits a single digital signal to up to 2 devices, balanced, and with power pass through on all ports.
• GOLD PLATED CONNECTORS – Allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	Would this allow inserted dc on one output port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	No. It doesn’t but it does fold in half if that helps.
Question:	Is each OUT port protected by a diode
Answer:	Hi, our beam body is made of wood+high density EVA, and beam lege is made of high density steel, beam leg is all welded, weight capacity for our beam is more than 300lbs. Could i know your gymnastics level? Then we could recommend you the right item. If any questions please let me know, we are all here for you. Marfula Service Team
Question:	does it have a male end
Answer:	hi, this type of balance beam could not be connected, could i know the length you need? then we can customize it for you. As you know, we are factory, design and produce them by ourselves, many gymnastics coach like our gymnastics equipment. If you have any requirement, please feel free to contact us, we will try our best to do the best suitable equipment for you.
Question:	what is the signal loss on this? 3.5 db or 7 db
Answer:	hi, number 6 is tan, it is one popular color for gymnast, and the leg of this type of balance beam is with wheel, move easily.

Product features

GE Digital 2-Way Coaxial Cable Splitter

Distributes a digital signal to multiple TVs

• 1 Input 2 Outputs (balanced)
• Distributes digital signal of 2.5 GHz : 5-2500 MHz
• Power Pass All Ports
• Compatible with RG59 and RG6 coaxial cable
• Gold plated connectors for corrosion resistance

Distribute one signal to two TVs

Compact for easy and out of the way installation

Works with all TVs and TV Antennas - regardless of brand

All RG59 & RG6 Coaxial Cables - all brands

Product description

This premium signal splitter is able to split a single input Coaxial Cable signal into multiple separate signals. Convenient and ideal for those who have the need for additional outputs into multiple displays from one source. Passive splitter5~2400 MHz1 input 8 output semi Isolation

• Package Dimensions: 4.9 L x 1.2 H x 2.5 W (inches)
• Package Weight : 0.21 pounds
• Country of Origin : China
• Passive splitter5~2400 MHz1 input 8 output semi Isolation

User questions & answers

Question:	is this a balanced splitter so that the db drop on all outputs is the same? Input would be appreciated
Answer:	This is a standard United States thread which is 5/8 of an inch 27 threads per inch.
Question:	What is the db drop from input to output
Answer:	I agree with the 1st reply. If you have your original receipt, contact your dealer/seller for a warranty claim. If that does not work or receipt is missing, find a local Ludwig dealer in your area to assist you for parts or contact Ludwig home offices in Elkhart Indiana for assistance.
Question:	Can i use this connect a voip line? my existing splitter (only 1ghz) is powered and has a dedicated voip port so not sure if this swap will work
Answer:	Yes it folds up nicely.
Question:	Will the splitter work with moca
Answer:	yes you can use double pedal

Product description

Bam splitters were designed by 2 highly experienced cable Technicians who were frustrated by the lack of access the general public had to high quality components for their cable setups. Bam splitters were built to give an improved experience for the end user very high quality, bi-directional, high performance Solid built, 4-Way coax cable splitters designed for CATV, satellite, or antenna services. They use frequency spectrum 5-2300 MHz for Optimal performance on all devices. Whether you are using cable internet (broadband), TV or phone, satellite TV, or antenna system We have you covered. Works great with Mocha systems. Zinc die-cast housing with nickel plating, F-type connector, low insertion loss, high isolation, max passing current 0.5a, DC 24V, multi-outputs. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with a coaxial connection. Unlike some cheaper splitters, which contain thin soldered wires to connect each port, bam splitters house A much more durable and reliable circuit board for passing signal from port to port. The shielding improves signal quality for internet and VoIP devices improving speeds and lowering packet loss.

• 5-2300 MHz (2.3Ghz) RF bi-directional digital Coax/ coaxial cable Splitter for CATV and satellite and great for Mocha
• Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out
• Low signal loss of only 7dB on each output port improving performance and speeds
• All ports are power passing for easy satellite Connection
• High shielding structure lowers digital noise and improves signal quality, reducing packet loss for modems, and for all other devices

User questions & answers

Question:	I want to hook this up to my direct tv dish for the signal and run two boxes with two separate wires. Is this what I need
Answer:	Yes, it should not give you any problems.
Question:	Can I use this outside my house to split my Comcast cable? The current 3 way splitter they are using is not grounded. Do I need to ground this 4 way
Answer:	It is my understanding that there will be about 7db of signal loss on each port. The more you split the signal, the weaker it gets. This is not usually a problem unless you are starting with a weak signal and then splitting it multiple times. If you need a stronger signal, you can put a signal amplifier as close to the source as possible.
Question:	Do I need to actually plug anything into the input on this? I just want to link multiple moca 2 devices on existing home wiring
Answer:	These devices are passive with no "active" electronic circuitry. As such they essentially perform a resistive "split" taking and input signal and splitting it to 3 outputs, each with a lower "output" signal than the "input". BUT, since the device is passive, signals can go both ways from the "outputs" back to the "input", again with some reduction in signal levels for the input and other outputs. It's a bit complicated so you might think of it as a major 2 lane roadway as the signal "input", but with 3 additional smaller single lane secondary roadways that permit signal "traffic" to either exit to them from the main roadway, or have smaller roadways provide "signal traffic" back to the main highway with no one-way roads, stop signs or traffic lights to impede the signal "traffic" flow.
Question:	Can i use this device to add an ota signal from an attic antenna to the cable from my catv service and then separate the signal at the rear of my tv
Answer:	You'll need an adapter (transformer or balun) that goes from a 300 ohm ("old screws") to 75 ohm F-Connector (pushpins). You can likely find one at Home Depot or Lowes. Failing that, Amazon has them for about $7- here: https://www.amazon.com/dp/B07FFNTNQV/ref=sxts_kp_tr_2?pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=gnveX&pf_rd_r=CACFYS8SY3ZC0AX3DFDE&pd_rd_i=B07FFNTNQV&pd_rd_w=go4gS&pd_rd_r=f0993bb1-701f-451b-9271-7e563935a8bb&ie=UTF8&qid=1546465511&sr=2

Product description

BAMF Splitters were designed by 2 highly experienced cable technicians who were frustrated by the lack of access the general public had to High Quality components for their cable setups. BAMF Splitters were built to give an improved experience for the end userVERY HIGH QUALITY, Bi-Directional, High Performance solid built, 6-way coax cable splitters designed for CATV, Satellite, or Antenna services. They use frequency spectrum 5-2300 MHz for optimal performance on all devices. Whether you are using cable internet (broadband), TV or phone, satellite TV, or antenna system we have you covered. Works great with MoCA systems. Zinc die-cast housing with nickel plating, F-type connector, low insertion loss, high isolation, max passing current 0.5A, DC 24V, multi-outputs. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with a coaxial connection. Unlike some cheaper splitters, which contain thin soldered wires to connect each port, BAMF splitters house a much more durable and reliable circuit board for passing signal from port to port. The Shielding improves signal quality for internet and VoIp Devices improving speeds and lowering packet loss.

• 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa
• Internal circuit board for better reliability/durability.
• Low signal loss of only 11db on each output port improving performance and speeds
• All Ports are Power passing for easy Satellite connection
• High shielding structure lowers digital noise and improves signal quality, Reducing packet loss for Modems, and for all other Devices

User questions & answers

Question:	Does this work with cable tv or just satellite or antenna receiving signals
Answer:	As far as I know it only works mon tv cables
Question:	Is it exterior rated
Answer:	Worked great for what I was working on
Question:	Will this work for Directv
Answer:	I don’t really know. I used it to connect both my tv and my radio to my rooftop antenna.
Question:	This says Moca compatible. What versions of Moca are supported
Answer:	Yes, I found that it does a better job then a splitter.. I have 2 tv's connected up to the cable splitter and both tv's work really well form my off air antenna. The over the air stations in a rural area come in great.

Product description

THE CIMPLE CO, A Family Company located in the USA, is proud to offer these high quality and durable weather proof seals, also known as weather grommets, or weather boots. F81 Weather Boots, are for use with the F-Pin connection (standard on US Cable systems). These seals may be installed indoors or outdoors - ensuring that the female port stays clean and free from water, dust, dirt, rust, or debris. We back our product 100%, with easy returns, as well as free technical and customer support.



THE CIMPLE CO

All of our high quality products are brought to you by our Family owned and operated company.

We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.

Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

• Perfect For: Satellite (Including DIRECTV and Satellite Dish), Cable TV and Internet (including Comcast, Cox, and Charter), and Off-Air Antenna systems.
• Manufactured from high quality material for exceptional quality and extremely low signal attenuation.
• Easy to Install, simply slip on before installing connectors
• Designed for standard F81, F-Type, F-Pin Ports
• Pack of 4 Indoor / Outdoor Rated Weather Seal Boots (Grommets)

User questions & answers

Question:	Will these work with a 3 way splitter using rg6 dual shield coaxial cable
Answer:	I have not been able to measure it however from a standard hi-def antenna array mounted at 7 m height I was able to get 59 channels in my area (outside Philadelphia). When I ran through this splitter at the half-way point in the basement instead of the original joiner I had in the line I lost over half the channels. This would be indicative of a dB loss which is large. I just purchased an amplified splitter - hoping that helps.
Question:	Will this work with cat 6 cable (rj
Answer:	This is a high frequency non powered splitter. I use it for my various tv's in several rooms and does well. It is not powered to filter or amplify like your powered splitter. So as to VOIP , It may work but the signal will not be amplified.
Question:	Will these fit over 3/4 pvc for a project I am doing? Would be using kind of like a gromet but I don't need the cover etc the gromets offer
Answer:	Yes. I use it to create a MOCA 2.0 network between two Verizon Quantum Gateway routers.

Product description

This premium signal splitter is able to split a single input Coaxial Cable signal into multiple separate signals. Convenient and ideal for those who have the need for additional outputs into multiple displays from one source. Passive splitter5~2400 MHz1 input 2 output semi Isolation

• This premium signal splitter is able to split a single input Coaxial Cable signal into multiple separate signals
• Convenient and ideal for those who have the need for additional outputs into multiple displays from one source
• Passive splitter5~2400 MHz1 input 2 output semi Isolation
• Package Dimensions: 6.858 L x 3.302 H x 9.906 W (centimeters)

User questions & answers

Question:	Can I use this for retro games
Answer:	It should, I used it on a 3-way splitter and quad sheild cable.
Question:	will this work using two digital converters on one antenna
Answer:	I apologize; however, these boots are not designed for data connections, such as RJ-45. The will; however, work well with coaxial F connections such as RG59, RG6, and RG11 connectors.
Question:	I am installing a new coax outlet, is this splitter safe to use inside the wall
Answer:	These weather grommets are made to fit over Coaxial RG6 F cable which has an OD of .332" so no, they won't fit over 3/4" PVC. You might be able to use 3/4 pvc flexible Hub connectors.
Question:	I want to split my cable for TV and Internet, will this work
Answer:	Yes, this splitter is balanced. What the seller ("Monoprice") wrote is wrong, most likely he is applying the definition of "Balanced" used for other electronic components, e.g. microphones. Balanced in the world of coax splitters means that the signal from all outputs is the same (and different for unbalanced). The number of outputs for this splitter is a power of 2 (i.e. 8=2*2*2 = 2^3). So, it is balanced. I would even say "naturally balanced", as it would take a special effort to make it unbalanced. When you have an even number of outputs, the easiest design is to have the splitter unbalanced, - e.g. 3, the easiest way to realize it is by splitting the signal 2-ways, and then splitting one of those outputs 2-ways again. Each 2-way split gives you about 3.5 dB attenuation. So, you would have -3.5 dB on one leg, and -7dB on two others. On a balanced 3-way splitter you'd get -5.5dB. So, any splitter whose number of outputs is a power of 2 (i.e. 2, 4, 8, 16) are "naturally" unbalanced. While in principle, when you have other even number of outputs (6, 10, 12, 14), - those could be balanced and unbalanced (think of a 6-way as a combination of a 2-way and two 3-ways), - in reality, all even-output-number splitters that I've seen sold are balanced.

Product description

BAMF Splitters were designed by 2 highly experienced cable technicians who were frustrated by the lack of access the general public had to High Quality components for their cable setups. BAMF Splitters were built to give an improved experience for the end user VERY HIGH QUALITY, Bi-Directional, Balanced solid built, 3-way coax cable splitters designed for CATV, Satellite, or Antenna services. They use frequency spectrum 5-2300 MHz for optimal performance on all devices. Whether you are using cable internet (broadband), TV or phone, satellite TV, or antenna system we have you covered. Works great with MoCA systems. Zinc die-cast housing with nickel plating, F-type connector, low insertion loss, high isolation, max passing current 0.5A, DC 24V, multi-outputs. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with a coaxial connection. Unlike some cheaper splitters, which contain thin soldered wires to connect each port, BAMF splitters house a much more durable and reliable circuit board for passing signal from port to port. The Shielding improves signal quality for internet and VoIp Devices improving speeds and lowering packet loss.

• 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa
• Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out
• Low signal loss of only 5.5db on each output port improving performance and speeds
• All Ports are Power passing for easy Satellite connection, Also works great for Cameras, and for Amplifiers
• High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices

User questions & answers

Question:	Why does the 3-way splitter cost more than the 4-way splitter
Answer:	It probably has to do with the type of splitter. The 4-way may not be bi-directional and/or does not handle the same frequency range as the 3-way that I had purchased.
Question:	Will this work with a cell signal booster
Answer:	Yes, my is attach to a booster antenna
Question:	why is bidirectional important
Answer:	Bidirectional is important if you use your cable for internet service or your cable box provides interactive services.
Question:	I am cutting the cord. i have two tv and a new multi directional antenna. will this work for me
Answer:	Yes because your are splitting the signal for two tv. I did the same, the BAMF Splitter is made in USA.

Product description

BAMF Splitters were designed by 2 cable technicians who were frustrated by the lack of access the general public had to High Quality components for their cable setups. BAMF Splitters were built to give an improved experience for the end user. Please Read further to see more specific specs! VERY HIGH QUALITY, Solid Built 8-way coax cable splitter designed for CATV or Satellite services. Used frequency spectrum 5-2400 MHz for optimal performance for all devices. Whether you are using Cable: Internet, TV or Phone, Satellite TV, or Antenna system we have you covered. Works Great with MoCA systems. Zinc die-cast housing with nickel plating, F-type connector, low insertion loss, high isolation, max passing current 0.5A, DC 24V, multi-outputs, and bandwidth of 5-2300MHz. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable, or older RG59 cable, and will support any device that works with coaxial connection.

• 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa
• Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out
• Low signal loss of only 11db on each output port improving performance and speeds
• All Ports are Power passing for easy Satellite connection
• High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices

User questions & answers

Question:	Is it bedirectional
Answer:	If you are asking if the splitter requires AC power (i.e. amplified) the answer is no.If you are asking if it will pass AC or DC through on the COAX, I don't think so.
Question:	Will this be adiquate to split the signal from direct TV sat
Answer:	This splitter has one inlet for the main cable, and three outlets, a cable to a TV box in each if you want. I split mine for a TV box and Internet modem for the computer.The one left is capped.
Question:	neeI d a digital satellite to watch several chanel in english and spanish. What you recommended
Answer:	A three way unbalanced splitter will have two -7db connections and one -3.5db loss connection. One would use the lower loss -3.5db connection for a modem and the -7db for the televisions.
Question:	Will this work on comcast hd on-demand cable boxes? i have 3 on-demand and 2 hd converters
Answer:	"Balanced" will split the signal evenly across all three taps, 1/3 each. "Unbalanced" will make one of the ports stronger. So the split will be something like 1/2 + 1/4 + 1/4.

Product description

Use 4-, 6- and 8-way 1GHz Passive Video Splitters and Passive Video Splitter Modules to split digital cable, quality cable TV and off-air signals to 4, 6 or 8 televisions throughout a home or office. The Video Splitter Modules are designed for easy installation in any Leviton 140, 280 or 420 Structured Media Enclosure. The Video Splitters are easily installed in Leviton MDU Enclosures or used in any application where a passive video splitter is needed. 1 X 8 (8-way) 2-Ghz passive video splitter

• 8 Way, 2 GHz Splitter
• Size: 1.14"(29.0mm)H x 3.36" (85.3mm)W x 2.65"(67.3mm)D
• Provide digital cable, cable TV and other video services via coaxial cable to any room in a house or office
• The Video Splitter Modules are designed for easy installation in any Leviton 140, 280 or 420 Structured Media Enclosure
• The Video Splitters are easily installed in Leviton MDU Enclosures or used in any application where a passive video splitter is needed

User questions & answers

Question:	What type of material is this splitter made of
Answer:	I wouldn't. Most solutions are made to be used with cleaning pads (MoFi and Groovewasher, for example; these are probably the best). These cloths aren't really all that effective on vinyl, to be honest, and they're not designed to be. I use them to clean the top of my audio equipment.
Question:	My 8 way splitter says -130db on the back. will i notice any db loss if each input is being used
Answer:	I don't know exactly. It seems like the same thickness as all other microfabric cleaning towels that I've used.
Question:	Will this work to split a signal from an HD antenna
Answer:	It is superfine fiber, we called microfiber.
Question:	Is this appoved for xfinity X1 service
Answer:	I just put them in the washer.