16 best coaxial splitters
Coaxial splitters are electronic devices used in various audio and video setups to divide a single coaxial cable signal into multiple signals. They are commonly used in scenarios where you want to connect multiple devices to a single cable source, such as in cable television, satellite TV, and antenna installations. Here's what you need to know about coaxial splitters:
Function: The primary function of a coaxial splitter is to take the input signal from a coaxial cable and split it into two or more identical output signals. Each output can then be connected to a separate device, such as a television, cable modem, or satellite receiver.
Types: There are various types of coaxial splitters available, and the choice of splitter depends on the specific application:
- 2-way splitter: Splits the signal into two outputs.
- 3-way splitter: Splits the signal into three outputs.
- 4-way splitter: Splits the signal into four outputs.
- 8-way splitter: Splits the signal into eight outputs, commonly used in larger distribution setups.
Frequency Range: Coaxial splitters are designed to work within specific frequency ranges. It's essential to choose a splitter that matches the frequency range of your signal source, whether it's cable TV, satellite TV, or over-the-air broadcasts.
Insertion Loss: Splitters introduce a certain amount of signal loss, known as insertion loss, which can vary depending on the quality of the splitter. Higher-quality splitters tend to have lower insertion loss, ensuring that the signal remains strong across all output connections.
Isolation: Good coaxial splitters provide isolation between output ports, meaning that the signal on one output port doesn't significantly interfere with the signal on another output port. This prevents signal degradation.
Termination: It's crucial to terminate any unused output ports on the splitter with termination caps to prevent signal reflection and maintain signal quality.
Installation: Coaxial splitters are relatively easy to install. You simply connect the input cable to the input port of the splitter and then connect the output ports to the devices you want to receive the signal. Proper cable management is essential to avoid signal interference.
Signal Quality: The quality of the splitter and the cables used in the setup can affect signal quality. Low-quality splitters or damaged cables can lead to signal degradation and poor picture or audio quality.
Amplified Splitters: In cases where the signal needs to be split to multiple devices over long cable runs, amplified coaxial splitters with built-in signal amplifiers may be used to maintain signal strength.
In summary, coaxial splitters are essential components in audio and video distribution systems, allowing you to share a single cable signal among multiple devices.Choosing the right type and quality of splitter is crucial for maintaining signal quality and ensuring a reliable connection to your electronic equipment.
Below you can find our editor's choice of the best coaxial splitters on the marketProduct description
APC 1500 VA H Type Line Conditioner H15BLK. External line conditioner AC 120V 1500VA 12 output connector, Home theater system protection, black, 5 year warranty. Operating Temperature = 32 - 104 Degrees Fahrenheit (0 - 40 Degrees Celsius ), Storage Temperature = -15 - 40 Degrees Celsius
- Protection from blackouts, voltage sags and swells, electrical noise interference and damaging power transients
- Includes - 6 feet Gold Plated Coaxial Cable, Rack Mounting brackets, RJ11 Cable, User Manual
- Equipment protection policy Lifetime 750000 dollars.
- Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Protects connected loads from surges, spikes, lightning, and other power disturbances.
User questions & answers
Question: | Is this a true UPS, is it more or something else |
Answer: | I did not keep it so I am not sure, sorry. |
Question: | What year did the H15 come out and is it still worth having today? or is there better options for around the same price |
Answer: | Pam, all of the suppliers have been aiming for a frost free option, but honestly, none of them have mastered it yet. Hopefully this helps in your decision making. |
Question: | Are any of the outlets "stay on all the time " type. I would like to turn some components off and leave by cable box and modem powered |
Answer: | Product in Inches (L x W x H): 19.0 x 17.5 x 31.25 |
Question: | Can someone tell me the width of this item ? Thanks |
Answer: | I had no idea what the product was till I got to this page. Of course they are washable. there is a slight stickyness on the underside but I don't use it that way so its not a problem |
Product description
The APC G5BLK 9-Outlet G-type rack-mountable power conditioner has a 450, 000 lifetime equipment protection policy.
- 9 Outlets-8 on rear, 1 on front
- 3, 400 Joules
- 15a
- 3 outlets continually stay on
- 1U rack design
- 9 outlets on rear, 1 on front
- 3400 Joules
User questions & answers
Question: | Is the power cable a flat plug |
Answer: | Mine is the same sort of flat, angled 3 prong plug that H. Gajjar, Scott C. and Christian Moreland have. |
Question: | Anyone using this for high end headphone amps and dacs? Thoughts |
Answer: | I am using this with a system of individual components: amp, preamp, CD player, tuner, turntable, DAC, and wifi receiver. I've had it about two years and it works flawlessly, but what I like best is that it sequences start-up and shut down so I always get everything in the order that protects the equipment. Plus it does offer spike protection. I'm not sure what you mean by high end, but my system cost ~$10000 without adding speakers. In short, I'd buy the G5BLK again. |
Question: | Is this a good unit to protect home theaters, flat panel tv 80"? Does it condition and protect surges |
Answer: | I purchased this unit for my home theater system and, yes, it will protect connected equipment against power spikes/surges up to 3400 joules of energy and also provides filtering/isolation to reduce audio/video noise. 3 of the 9 outlets are always on, which is ideal for connecting networking devices like cable modems, wireless routers and network switches. The other 6 outlets can be turned on and off using the main power switch on the front. We turn ours off at night to reduce "vampire" power draw when the home theater components are not being used. When the power button is pushed the outlets are automatically powered on (or off) in sequence to reduce power spikes cause by in-rush currents when multiple devices turn on or off at the same time. Note that you need to hold the power button a couple of seconds for it to turn off, so an accidental quick push doesn't do it. It also has a convenient outlet on the front. It's a bit expensive, but worth it to protect your even more expensive home theater equipment. Hope this helps. |
Question: | Does this come with the rack mounts - they are not pictured |
Answer: | Yes, it comes with rack mount brackets, and feet. You can see a picture of the rack attachment brackets on the APC web site at http://www.apc.com/shop/us/en/products/APC-AV-15-Amp-G-Type-Rack-Power-Filter-120V/P-G5BLK. The product installation manual is also available at the same site and also shows the brackets. I bought this unit a few years ago and just checked the original box, since I didn't use them, and the were not there, but the box does say they are included. So, my confidence is high that brackets are included. |
Product description
APC AV G-type rack-mountable power conditioner with a nominal input voltage of 120V includes 9 outlets and features a nema 5-15R receptacle style. APC 9-outlet G-type power conditioner with a maximum input current of 15A facilitates AV power protection from electrical noise interference and damaging power transients. Power filter with 120V input voltage comes with rack mounting brackets. APC AV G-type rack-mountable power conditioner with a nominal input voltage of 120V includes 9 outlets and features a nema 5-15R receptacle style. APC 9-outlet G-type power conditioner with a maximum input current of 15A facilitates AV power protection from electrical noise interference and damaging power transients. Power filter with 120V input voltage comes with rack mounting brackets. Black. Dimensions: 1.7"(H) x 9 1/2"(W) x 17.1"(D). Input voltage: 120 V, 50/60 Hz. Receptacle style: NEMA 5-15R, input connections: NEMA 5-15P. Number of outlets: 9. Input current: 15A, input breaker capacity: 15A. Surge energy rating: 3400 J, EMI/RFI noise rejection: 55 dB. Cable length: 8'. Let through voltage rating: < 40. 1U rack design, LCD display, rack or shelf mounted. Environment conditions: 0 - 50 deg C operating, 0 - 95% operating relative humidity. Includes AV G type line conditioner, rack mounting brackets, user manual. Certifications: ROHS. Warranty: Lifetime, $450,000 lifetime connected equipment warranty.
- Sold as 1 Each.
- Black. Dimensions: 1.7"(H) x 9 1/2"(W) x 17.1"(D). Input voltage: 120 V, 50/60 Hz. Receptacle style: NEMA 5-15R, input connections: NEMA 5-15P.
- Number of outlets: 9. Input current: 15A, input breaker capacity: 15A. Surge energy rating: 3400 J, EMI/RFI noise rejection: 55 dB. Cable length: 8'.
- Let through voltage rating: < 40. 1U rack design, LCD display, rack or shelf mounted. Environment conditions: 0 - 50 deg C operating, 0 - 95% operating relative humidity.
- Includes AV G type line conditioner, rack mounting brackets, user manual. Certifications: ROHS. Warranty: Lifetime, $450,000 lifetime connected equipment warranty.
Product description
From APC power engineering labs comes the H Type power conditioner, a single unit that delivers pure, stable power for high performance AV. The preferred choice of power protection for high performance home entertainment systems, The H Type power conditioner combines surge protection, isolated noise filtering, and voltage regulation. Finally, there's a solution that eliminates stress on component power supplies, eradicates EMI RFI and voltage fluctuation as a source of AV signal degradation, and protects equipment from damaging surges, spikes, voltages fluctuations, and lightning.
- H Type
- Power
- 12 out
User questions & answers
Question: | will this unit block interference from creating audible buzzing sound coming through home theater speakers |
Answer: | Only if the interference is coming from your power source. If the buzzing is caused by a fault in the amplifier or speaker wires, this unit can't correct it. |
Question: | Product Dimensions: 1 x 5 x 5 inches ; 1 pounds ... oh, really |
Answer: | No, the actual dimensions are roughly 17 x 9 x 4 and just over 16 pounds. |
Question: | Can you plug a computer into this via a generator |
Answer: | 12 outlets 4,720 Joules 1,000VA power capacity Automatic voltage regulation Building wiring fault indicator Cable line/coaxial protection Dataline protection 2 coaxial protection jacks RJ11 2-way modem/fax/DSL splitter with protection (4-wire dual lines) IEEE let-through rating and UL 1449 compliance Lightning and surge protection Isolated noise filtering RFI/EMI noise rejection (100kHz-10MHz) 50dB Overload indicator Telephone line splitter Protection working indicator Resettable circuit breaker Flat-profile plug Status indicator LEDs Delayed outlets--DC trigger UL(R) listed Includes 6ft gold-plated coaxial cable, rack-mounting brackets, RJ11 cable and user manual 10ft power cord Dim: 3.74"H x 17"W x 9.5"D 5-year product warranty $500,000 lifetime connected equipment warranty Black Additional Info UPC Code 0731304236542 Condition New Condition Description This product is brand new and sealed. Package Includes APC H10BLK 12-Outlet H-Type Rack-Mountable Power Conditioner with Coaxial Protection Model Number H10BLK MPN H10BLK Warranty 5 Year Warranty Return Policy This product may be returned within 30 days for a replacement or refund. Any physical damage must be reported within 14 days of delivery. Package Height (inches) 7.1 Package Length (inches) 20.7 Package Width (inches) 12.8 Weight (lbs) 21.8 |
Question: | Does this product work with 220 V |
Answer: | My house operates at 220v but call the manufacturer to be 100%. Works flawlessly for me. |
Product description
Component-specific filtering and surge protection provide unrivaled defense against power problems. The APC A/V 9-Outlet G-Type 20 Amp Power Conditioner protects high-performance audio and video equipment against surges, spikes and even lightning. Isolated noise filter banks can improve sound and video quality by eliminating harmful electrical noise interference. It also reduces power consumption by disconnecting utility power to devices that are not in use. With the G Type Power Filter, you can rest assured that your home audio-video system is protected and will give you the best performance your system can provide.
- 9 outlets
- 3,400 Joules
- 20a capacity
- Green product-saves money & energy by utilizing switching outlets that will turn on or off based upon control outlet's settings & power use
- 1U Rack-mount design
- 9 outlets
- 3400 Joules
User questions & answers
Question: | Is this the actual unit for just a replacement battery |
Answer: | Yes as long as you have power steering and air conditioning. |
Question: | Is it normal to hear an electrical, hissy noise from behind the unit |
Answer: | These cables will work perfectly with Xbox one, 4K televisions and blue ray players. |
Question: | Does this model come with rack mount accessories |
Answer: | 10.2Gbps |
Question: | Hello. Does this APC Battery Backup automatically shut down the devices connected to it? Power outage |
Answer: | Yes, as long they both HDMI ports the cable will work. |
Question: | Ia this unit different from (https://www.amazon.com/apc-12-outlet-conditioner-electronic-consumer/dp/b01dmvsszw/ref=sr_1_1?crid=1tqohh0e4f1cw&keywords |
Answer: | If your chromebook has an HDMI output jack and your tv has an HDMI input jack I should think it would work but don't know for certain. All I can say is the HDMI cable works between my laptop computer and my tv very well when I select the correct input on the tv. |
Question: | Does this come with a factory warranty |
Answer: | No, this will only mirror your main display on all attached monitors. |
Product description
Expand your entertainment viewing options with the GE-branded Pro™ Digital 2-Way Coax Splitter. Whether you access your entertainment through a TV antenna, cable or satellite subscription or other device, this handy splitter lets you easily deliver the digital signal to multiple TVs for the best in high-definition entertainment. This coax splitter is designed to evenly distribute one digital signal to support TVs, DVRs, Blu-ray™/DVD players, cable boxes and more. It transfers audio and video for all brands of electronics using F-type connectors and is capable of handling frequencies of 5-2500MHz. Installation is easy. Simply use the clearly labelled, screw-on input and output jacks. Screw the coax connector from the signal source that you wish to distribute, such as your TV antenna, cable or satellite connection, onto the coax jack labeled “in” on the splitter. Screw in the coax connectors for the cables running to the TV or other device to any of the coax jacks labeled “out.” The compact design fits easily in tight spaces and integrates seamlessly with existing hardware. Experience greater entertainment with the GE-branded Digital 2-Way Coax Splitter.
- MULTI PURPOSE – This digital coax splitter is designed for use with HD TV signals, Satellite TV, and High Speed Internet Modems as well as Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
- FREQUENCY RANGE – Distributes a digital signal of 2.5 GHz (5-2500 MHz) frequency range
- 2 OUTPUTS – Splits a single digital signal to up to 2 devices, balanced, and with power pass through on all ports.
- GOLD PLATED CONNECTORS – Allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
- U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.
User questions & answers
Question: | Would this allow inserted dc on one output port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs |
Answer: | No. It doesn’t but it does fold in half if that helps. |
Question: | Is each OUT port protected by a diode |
Answer: | Hi, our beam body is made of wood+high density EVA, and beam lege is made of high density steel, beam leg is all welded, weight capacity for our beam is more than 300lbs. Could i know your gymnastics level? Then we could recommend you the right item. If any questions please let me know, we are all here for you. Marfula Service Team |
Question: | does it have a male end |
Answer: | hi, this type of balance beam could not be connected, could i know the length you need? then we can customize it for you. As you know, we are factory, design and produce them by ourselves, many gymnastics coach like our gymnastics equipment. If you have any requirement, please feel free to contact us, we will try our best to do the best suitable equipment for you. |
Question: | what is the signal loss on this? 3.5 db or 7 db |
Answer: | hi, number 6 is tan, it is one popular color for gymnast, and the leg of this type of balance beam is with wheel, move easily. |
Product features
GE Digital 2-Way Coaxial Cable Splitter
Distributes a digital signal to multiple TVs
- 1 Input 2 Outputs (balanced)
- Distributes digital signal of 2.5 GHz : 5-2500 MHz
- Power Pass All Ports
- Compatible with RG59 and RG6 coaxial cable
- Gold plated connectors for corrosion resistance
Distribute one signal to two TVs
Compact for easy and out of the way installation
Works with all TVs and TV Antennas - regardless of brand
All RG59 & RG6 Coaxial Cables - all brands
Product description
The GE 3-Way Coaxial Splitter splits a single incoming cable or satellite signal coming from your cable or satellite receiver, VCR, or antenna into multiple outgoing signals. The Nickel plating ensures a corrosion free connection. The GE 3-Way Coaxial Splitter is backed by a lifetime warranty.
- MULTI PURPOSE – This coax splitter is designed for use with HD TV signals, Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
- FREQUENCY RANGE – Distributes a signal of 5-900 MHz frequency range (0.9 GHz).
- 3 OUTPUTS - Split a single cable or satellite signal to view and display on up to 3 devices
- NICKEL PLATED CONNECTORS – corrosion resistant and compatible with RG59 and RG6 coax cable.
- U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support to assist with any questions or issues.
User questions & answers
Question: | How much signal loss is there for the 3-way splitter |
Answer: | The stepper is 47 inch high,so I think the height of the table must be 47 inches. |
Product features
GE 3-Way Coaxial Cable Splitter
Distributes a digital signal to three TVs
- 1 Input 3 Outputs
- Distributes signal of 5-900 MHz (0.9 GHz)
- Compatible with RG59 and RG6 coaxial cable
- Nickel plated connectors for corrosion resistance
Distribute one signal to three TVs
Compact for easy and out of the way installation
Works with all TVs and TV Antennas - regardless of brand
All RG59 & RG6 Coaxial Cables - all brands
Product description
The GE 2-way coaxial splitter splits a single incoming cable or satellite signal coming from your cable or satellite receiver, VCR, or antenna into multiple outgoing signals. The nickel plating ensures a corrosion free connection. The GE 2-way coaxial splitter is backed by a lifetime warranty.
- MULTI PURPOSE – This coax splitter is designed for use with HD TV signals, Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
- FREQUENCY RANGE – Distributes a signal of 5-900 MHz frequency range (0.9 GHz).
- 2 OUTPUTS – Split a single cable or satellite signal to view and display on up to 2 devices (balanced)
- NICKEL PLATED CONNECTORS – corrosion resistant and compatible with RG59 and RG6 coax cable.
- U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support to assist with any questions or issues.
User questions & answers
Question: | I do not have a tv. my cable company provides computer internet only. I see no info relating to computer use..... anyone using it this way only |
Answer: | The cable co's. coaxial cable goes into a modem. An ethernet cable is needed to connect the modem to the computer. A router is needed if you want wireless connectivity, in which case the router is connected to the modem. |
Product features
GE 2-Way Coaxial Cable Splitter
Distributes a digital signal to two TVs
- 1 Input 2 Outputs (balanced)
- Distributes signal of 5-900 MHz (0.9 GHz)
- Compatible with RG59 and RG6 coaxial cable
- Nickel plated connectors for corrosion resistance
Distribute one signal to two TVs
Compact for easy and out of the way installation
Works with all TVs and TV Antennas - regardless of brand
All RG59 & RG6 Coaxial Cables - all brands
- ⏪5-2500MHz (2.5GHz) Coax Splitter:Tolmnnts digital coaxial cable splitter is designed for CATV, Satellite TV,Antenna System, Internet and MoCA Configurations.
- 🔼Premium Quality Coaxial Splitter: Zinc die-cast housing with nickel plating and F-type connector, which are weather resistance, rust-proof and more stable.Get your premium quality, long life span.
- 🔼Low Signal Loss:Internal circuit board,high shielding structure for better performance. Which can lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
- 🔽Easy to Use:All coaxial ports are power passing, which can make your satellite connection much easier.
- ⏬What's Included in the Package:1x Coaxial Splitter, 2x Screws,2x Screws Plug,1x User Manual .
User questions & answers
Question: | Will this splitter work to split the cable signal between cox contour and a cable modem |
Answer: | Yes it is. You can read it on the description: 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa. Also, it says ALL PORTS POWER PASS. |
Question: | Would this allow inserted dc on one port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs |
Answer: | Will work fine |
Question: | Will this coaxial splitter work outside |
Answer: | Not to familiar with types of satellites out there but I have the one you put in your window. So I run a cable in to BAMF 8 way and it gets distributed through out the house. I can watch different stations on different TVs. Please note that my satellite cama with an amplifier, I noticed that it helps a lot to push the signal through out the house. |
Question: | Is it possible to connect two antennas to one tv with this splitter |
Answer: | Yes but you will need to split at the main source. A cable splitter divides the original signal into equal segments. An 8 way splitter will give you 1/8 of the original signal to each outlet. Use the smallest splitter possible for your needs. |
Product description
This 2/ 3 / 4 / 6 / 8 - way Signal Splitter splits a coaxial video signal from cable TV, antenna or a VCR for connection to different devices.
- 5-2300 MHz 75Ohm TV F Splitters, Bi-Directional
- Accepts coaxial 'F' Type fittings
- Epoxy-sealed back-cover anti-corrosion plating
- Allows for a couple units to be operated from one source
- Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out
User questions & answers
Question: | Would this worl for multiple RF video game systems like atari and colecovision |
Answer: | Although only the house-hold A.C. power block is supplied, the tip injects 12.0Volt D.C. into this TV, so grab a radar detector cord and insert the "wine cork" end to a battery bank that runs car/truck items. |
Question: | Can this be used in reverse? I.e two inputs; one output |
Answer: | no |
Question: | Will this allow power from a control box to antenna for rotating the antenna |
Answer: | No,they are not rechargeable. |
Question: | Anyone know what db drop per port these are for the 6 port |
Answer: | no |
Product description
Leviton's Premium CATV Modules are designed to distribute incoming RF signals (Cable TV, HDTV, Antenna or other modulated sources) to 1, 8 or 16 locations throughout a home or office on coaxial cable. The modules incorporate state-of-the-art bi-directional signaling to support advanced interactive communications via a cable modem or cable box as well as standard CATV, antenna and modulated input from such sources as VCRs, DVDs and security camera/CCTVs. The Premium Line optimizes the performance of digital cable signals to handle advanced technologies offered by cable operators, including delivery of HDTV.
- Digital CATV and HDTV compatible
- High quality, professional-grade, robust machine-threaded, gold-plated brass ports meet SCTE requirements
- Distribute CATV, HDTV, antenna, VCR/DVD, Camera/CCTV signals on coaxial cable throughout a home or office
- Provide a bi-directional signal path to support cable modem or cable box communications.F-ports provide up to 15 psi weather sealing
- Durable aluminum die-cast housing with white powder coating
User questions & answers
Question: | Will this work with F-type screw |
Answer: | The PL8C will only work with 120 volts unless the wall wort is rated for 120-240 volts in which you would have to adapt the plug in for the receptacle. I also looked at the pl plus and I believe it is only rated for 120 volts. Is your equipment 220-240 volts if so you will need a conditioner that is rated for 240 volts. They are expensive!!If none of your equipment is 240volts you don't need a conditioner for 240 volts. Just because you hook up a bunch of equipment to the conditioner doesn't mean you need more voltage, it stays the same. But you need to watch how many amps you are pulling if you have a bunch of equipment and are pulling a bunch of power. They are rated at 15 amps, which means you can run 80% or 12 amps continuously through the conditioner and your electrical system (if the circuit is 15 amps). Are you in another another country which uses 240 volt power. If so get a conditioner for 240 volts. It would probably be rated for 20 amps. Hope this helps. |
Question: | Can this be used to split dash cam camera |
Answer: | Probably not, since this unit only employs filters to clean up transients, and does no regenerate a sinusoidal output. You may want to check out an UNINTERRUPTIBLE POWER SUPPLY with good output regulation. APC makes some good ones at a reasonable price. Furman also sells UPS systems. You may want to call APC and/or Furman directly for their recommendations. |
Question: | What leviton splitter product works with DirecTV |
Answer: | HelloDoes your generator have a pure sine wave? A sine wave is how AC electricity fluctuates as it cycles. 60 HZ means your electricity updates 60 x per second. Sounds fast and you cannot see it or tell it. But your computer or tv operates in nano seconds (millionth of a second) as it operates or refreshes its screen. So that is a basic explanation. If not, a GOOD power conditioner is very important on electronic devices. It should clean up irregularities in the generator vs line electricity. If I were you I would put a decent conditioner on important electronic devices. Not Monster etc., but a Nice Furman as you are looking at. Don't bother with things that don't cost s lot. Cheap tv's etc. The conditioner costs more than a new tv. I hope this helps you. Larry |
Question: | Will this work with a 4K tv we have direct tv 4k genie mini |
Answer: | Depends on the type of coax. Look on the cable insulation for coax type/number and google it |
Question: | Product description says "Rack-Mountable" but is it ? Someone answered no so the question to the seller is why is advertised as such |
Answer: | The Belkin 6-Outlet AV Power Strip has a three-pronged plug. You can view the photo of the plug on Newegg's website and key in BV106000 in the search bar. |
Question: | Is the display able to be dimmed or turned off |
Answer: | Sorry for not replaying, So far so good. No problems. Can't make guarantee, but it's a surge protector |
Question: | How loud is the fan in this unit? Is it always on or auto controlled |
Answer: | The plug is flat on the 12ft cord version, not the 4ft one. |
Question: | Are the batteries replaceable |
Answer: | Hi, Mikaele. The plug is flat and angled. |
Question: | What is the cord length |
Answer: | Yes, it is, Alen. Please get in touch to our Facebook Support page to learn more. |
Question: | Mine seems to have stopped working after 3 months. Lights on but nothing powers on that's hooked up to it. Master controlled light goes off quickly |
Answer: | Sorry but the one I reviewed was not the same model at all. Mine was round. |
Question: | What is the joule rating |
Answer: | Sure, works well. |
Question: | I live in an older apartment with ungrounded outlets. Can this product still be used |
Answer: | No |
Question: | Does this really work |
Answer: | No the alternator belt is different. |
Question: | Is it compatable with a portable generator |
Answer: | From 3/1997 a 2.7 Tacoma ac belt number is a 4pk870 |
Product features
APC AV Series C20B 8 Outlet Power Filter
The APC AV Series C20B 8 Outlet Power Filter provides surge protection and noise filtering for high-performance AV systems. The C20B’s isolated power filter banks eliminate electromagnetic and radio frequency interference (EMI/RFI) as a source of AV signal degradation. It also provides dataline surge protection and power conditioning which prevent power surges and spikes from damaging your electronic equipment. The C20B is energy efficient and safety agency approved. LED status indicators display power status at a glance, and a resettable circuit breaker ensures easy overload recovery. Finally, rotating outlets provide unrivaled mounting flexibility, allowing unit placement in various orientations to match your specific needs.
What's in the Box:
AV Power Protection for Your Electronics
Enjoy clear audio/visual performance and protection against damage caused by dangerous power events with the C20B power filter. In the span of a single video frame, lightning and power surges can destroy unprotected AV electronic equipment. Excessive electrical noise interference interrupt communications and degrade sound and video quality. The new C20B provides guaranteed surge protection and power conditioning for valuable AV and home theatre equipment.
Unique Rotating Outlet Design and LED Status Indicators
LED status indicators provide visual unit and power status updates, while rotating outlets allow unit orientation to match your specific AV setup.
Data Line Surge Protection
Data line surge protection protects connected loads from surges, spikes, lightning, and other power disturbances, preventing damage to connected hardware. A pair of gold, surge-protected COAX connectors ensure surges traveling over cable TV, satellite, or RF antenna lines do not reach connected equipment. The telephone line is also protected with a pair of RJ11 jacks.
Safety Agency Approved and Lifetime Warranty
The C20B offers reliable, safe protection. A lifetime warranty and $350,000 equipment protection policy ensure customer peace of mind.
- The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals
- Convenient and cost-effective 2-pack coax splitter 2 way provides spare or replacement units to use on different devices, including a MoCA adapter
- Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter
- Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz
- The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter
User questions & answers
Question: | Will these used together work as a diplexer for ota and satellite (directv) splitting both over one cable |
Answer: | I tried and it worked but I had an issue where my directv signal strength dropped about 20%. I then used the product bellow and the Splitter at the TV side separating back one cable to the tv rf in the other to the satellite receiver with minimum signal loss I just had to switch it. https://www.amazon.com/Wideskall-Plated-5-900-Coaxial-Switch/dp/B0199FSMGK/ref=mp_s_a_1_4?adgrpid=58903143587&gclid=CjwKCAjwzJjrBRBvEiwA867byq-f_3TrzpXHozoJBxmKaFRmhkbx58hGXb0y6ya3uwZ3IX4YQAPQSBoCsDMQAvD_BwE&hvadid=274680352971&hvdev=m&hvlocphy=9009992&hvnetw=g&hvpos=1t2&hvqmt=e&hvrand=15553942612325185371&hvtargid=kwd-303364360040&hydadcr=19223_9665532&keywords=2+in+1+out+coax+splitter&qid=1567037655&s=gateway&sr=8-4 |
Question: | can 1 output go to fios tv box and the other output to fios internet router/modem |
Answer: | I connected the cable to the single side, then both the frontier (formerly FIOS) internet router/modem and my TV's cable box on the double output side. Both my computer, wifi and tv work great. |
Question: | It work for cable tv |
Answer: | yes it does |
Question: | i want to put 2 over the air antennas into one cable, will a splitter do that, and will there be spoitter that will boost my single in the prosess |
Answer: | You need a combiner, not a splitter. I have that setup already on my home and I had to get a special one that combines the signals and also allows power pas through to both antennas so you can put a pre-amp on each antenna. |
Product features
2 Way Coaxial Cable Splitter
The Cable Matters Gold Plated Coaxial Splitter splits a single incoming coaxial signal from a cable television (CATV) line, VCR, satellite receiver, cable box, or antenna into multiple outgoing signals. Gold plating ensures a corrosion-free connection. Convenient and cost-effective 2-pack of coaxial splitters can be used on a variety of devices like TVs, cable modems, and more.
Complete the Connection
The coaxial splitter is a critical gateway for home entertainment and connectivity. Expand a single cable line into multiple lines to support all of your entertainment and networking accessories: A cable modem, cable boxes, networking hardware, and more.
Coaxial Compatible
- Cable television (CATV)
- VCR
- Satellite receiver
- Cable box
- Antenna
Instant Coax Cable Connection
- Instantly connect a coax cable to your TV
- RG6 coaxial cable compatible
Reliable Signal Transmission
- Precisely constructed zinc cast housing
- Gold-plated F-Connector housing
- F-Type Splitter Coax Cable,Connector 1: F Male; Connector 2:F Dual Female Connector; Cable Length: 15cm;
- Short and Flexible;So the position of the connector can be adjusted appropriately according to the usage scenario
- Please choose 50 Ohm or 75 Ohm according to your device - 50 Ohm coaxial cables are mainly utilized in wired and wireless networks to relay data signals. Low-loss 50 Ohm cables are used for transferring RF signals in wireless networks.Typical applications for 50 Ohm cables include GPS, cellular and test and measurement applications.
- We are professional RF coaxial cable manufacturers, we can provide customized. For example: Customize any length of coaxial jumper. If you need, please contact us by email.
- Never worry about any security problems. We are confident in the quality of our cable and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support.
User questions & answers
Question: | Can this be used for two over the air antenna |
Answer: | It's a splitter. It takes a source signal and splits it for multiple devices. Whether that is satellite TV or video game data it behaves the same. |
Question: | Does this replace the small metal splitter box |
Answer: | NO, this is a directional splitter one input 4 out puts. if you tried 2 inputs they would cancel each other out. |
Question: | Where and how I can choose 75 ohm cables when I place order |
Answer: | If your antenna have that capability to rotate then yes it will |
Question: | Is this specifically for rg6 tv cable |
Answer: | Avoid if you are looking to use with Xfinity. Caused an extreme quality drop to the point it pixelated every channel..... |
Product features
Description \ Specifications:
Description: F Male to F Dual Female Splitter Cable Made with RG316 cable, Low loss The RG316 wire is flexible, and the position of the connector can be adjusted appropriately according to the usage scenario.
Specifications: Impedance: 50 Ohm Cable Type:RG316 15cm(6")
Package List: 1 x Cable Please choose 50 Ohm or 75 Ohm according to your device
Application:
This cable is designed to work with devices and appliances with 50-Ohm impedance.Can be used for cable connection, testing of RF signal equipment, and connection when using dual antennas.
- 50 Ohm coaxial cables are mainly utilized in wired and wireless networks to relay data signals.
Low-loss 50 Ohm cables are used for transferring RF signals in wireless networks. Typical applications for 50 Ohm cables include GPS, cellular and test and measurement applications.
- 75 Ohm cables are the standard coaxial cables used throughout the home, they are often pre-wired into many homes and businesses. The primary application for 75 Ohm cables is transmitting video and audio signals. They are used to connect televisions to cable and satellite receivers and internet routers.
- 【Multi Purpose】5-2500MHz (2.5GHz) Coaxial Splitter,KELIIYO digital coaxl cable splitter is working for CATV, HD TV,Satellite TV,Antenna System, High Speed Internet and MoCA Configurations.
- 【Excellent Performance 】Low Signal Loss. Internal circuit board,high shielding structure for better performance. Which can lower digital noise and improves signal quality, reducing packet loss for Modems and other Devices.
- 【Supreme Quality】Premium Quality Coaxial Splitter. Zinc die-cast housing with nickel plating and F-type connector, which allows for optimal connectivity, corrosion resistance, rust-proof and more stable. Get your premium quality, long life span.
- 【Simple to Use】Split a single digital signal to up to 4 devices, all coaxial ports are power passing, which can make your satellite connection balanced and much easier.
- 【What You Will Get】1x 4-way Coaxial Splitter, 2x Screws, 2x Screws Plug,1x User Manual and lifetime service and technical support.
User questions & answers
Question: | Will this split a coax into four connections that can all be used for routers simultanously |
Answer: | The Furman will replace your surge protector. Had it for a few years now. Protected my HT from many storms. The Furman is not a sacrificial device, it will reboot and keep your stuff safe. |
Question: | Does this 3 way coax cable splitter with connect cable |
Answer: | I don't think so but I'm not absolutely sure. I power the unit on, it takes 1 - 2 seconds to show 120 in the display window, and I immediately go about my business. I love this unit. |
Question: | Is there a lot of signal loss when you connect two tv to both outputs of this coaxial video splitter |
Answer: | Sorry for such a long delay, just saw your question.Yes it is AR.It's absolutely amazing if you want to have a steady, same quality sound no matter where you perform or practice.In my practice studio, I can see that the voltage goes between 104 and 117 volts and it's never the same.So this voltage regulator does exactly what it says!Every pro guitarist must have one. |
Question: | Can i split my wall coax connection and make it into three one for my modem, one for cable stb and one for tv comcast box with this |
Answer: | As far as I know the output voltage is always 120 +-5 volts depending on the input voltage range between 97 and 137 volts. Hope this answers your question |
Question: | Can this be used outdoors |
Answer: | yes ! it will work will pc , mac , stereo equiptment , etc . and having a pcie sound card is a unusual question fot a power conditioner . |
- The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals
- Convenient and cost-effective 2-pack coax splitter 3 way provides spare or replacement units to use on different devices, including a MoCA adapter
- Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter
- Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz
- The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter
User questions & answers
Question: | Will this support twc connection - 100 mbps internet, phone and tv? Customer service says I need 3 way splitter |
Answer: | Sorry, I don't have that system. |
Question: | Any signal lose with the 4-way splitter compared to the 2 and/or 3 way splitter |
Answer: | This device is a passive junction connector. Amplification may be required depending upon the distance your signal has to travel. Mine works fine without amplification and the signal travels over 50 feet from the source to the box. |
Question: | Bidirectional? then why does 1 connector say in and 3 say out. shouldn't all 4 say in/out |
Answer: | You can use outside.You are advised to use the weather seals.Just don't use with or for Directv or Dish.Cable Splitters are not designed for that. |
Question: | Is any of these compatible with the old screws in the back of an old tv I have and hooking up item like my vcr component which has the pushpins |
Answer: | I am not sure. It works for my Xfinity cable. |
Product features
3 Way Coaxial Cable Splitter
The Cable Matters Gold Plated Coaxial Splitter splits a single incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals. Gold plating ensures a corrosion free connection. Convenient and cost-effective 2-pack of coaxial splitters can be used on a variety of devices like TVs, cable modems, and more.
Complete the Connection
The coaxial splitter is a critical gateway for home entertainment and connectivity. Expand a single cable line into multiple lines to support all of your entertainment and networking accessories: A cable modem, cable boxes, networking hardware, and more.
Coaxial Compatible
- Cable television (CATV)
- VCR
- Satellite receiver
- Cable box
- Antenna
Instant Coax Cable Connection
- Instantly connect a coax cable to your TV
- RG6 coaxial cable compatible
Reliable Signal Transmission
- Precisely constructed zinc cast housing
- Gold-plated F-Connector housing
- The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals
- Convenient and cost-effective 2-pack coax splitter 4 way provides spare or replacement units to use on different devices, including a MoCA adapter
- Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter
- Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz
- The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter
User questions & answers
Question: | Can i run an atari 2600 or nes through it |
Answer: | There are no rack mount accessories included with this item. |
Question: | Can this be used outside |
Answer: | Yes and No. There is a data connection that will power down a PC running powerchute software. However, all other devices will just lose power when the battery gets to the low setpoint. |
Question: | Is there a "db" rating for the out-ports |
Answer: | We are not experts in this field. The difference that we can determine is that the model we are selling has been discontinued by the manufaturer. |
Question: | Is this splitter bi-directional and will it work with MoCA |
Answer: | Yes, 2 years including battery, and unfortunately I had to use it. After about two months, the display began showing bizarre characters. The return process was easy and, thankfully, there was no shipping charge either way. That was over 6 years ago. The only thing I've had to do since was replace the batteries. |
Product features
4 Way Coaxial Cable Splitter
The Cable Matters Gold Plated Coaxial Splitter splits a single incoming coaxial signal from a cable television (CATV) line, VCR, satellite receiver, cable box, or antenna into multiple outgoing signals. Gold plating ensures a corrosion-free connection. Convenient and cost-effective 2-pack of coaxial splitters can be used on a variety of devices like TVs, cable modems, and more.
Complete the Connection
The coaxial splitter is a critical gateway for home entertainment and connectivity. Expand a single cable line into multiple lines to support all of your entertainment and networking accessories: A cable modem, cable boxes, networking hardware, and more.
Coaxial Compatible
- Cable television (CATV)
- VCR
- Satellite receiver
- Cable box
- Antenna
Instant Coax Cable Connection
- Instantly connect a coax cable to your TV
- RG6 coaxial cable compatible
Reliable Signal Transmission
- Precisely constructed zinc cast housing
- Gold-plated F-Connector housing
Latest Reviews
View all
Drill Adapter For Eye Lag Screws
- Updated: 07.02.2023
- Read reviews

Keen Waterproof Hiking Boots
- Updated: 10.01.2023
- Read reviews

Shampoo For Grey Hairs
- Updated: 29.01.2023
- Read reviews

Canon 7D
- Updated: 08.02.2023
- Read reviews

Feminine Hygienes
- Updated: 05.04.2023
- Read reviews