12 best c2g coax splitters
A C2G coax splitter, also known as a coaxial splitter or TV signal splitter, is a device used in home entertainment and cable or satellite TV setups. These splitters are part of the Audio Video Accessories category and are designed to distribute a single coaxial signal to multiple devices, allowing you to connect multiple televisions, cable boxes, or other devices to a single incoming coaxial cable. Here's what you should know about C2G coax splitters:
Function: The primary function of a coax splitter is to take the incoming coaxial cable signal and split it into two or more separate output signals. Each output can then be connected to a separate device, such as a TV or cable box.
Types: C2G offers various types of coax splitters, including 2-way, 3-way, 4-way, and higher configurations. The number indicates how many output connections the splitter has. For example, a 2-way splitter has one input and two output ports.
Frequency Range: Coax splitters are designed to work within specific frequency ranges, which are typically suitable for cable TV, satellite TV, and over-the-air (OTA) antenna signals. Ensure that the splitter you choose supports the frequencies used by your specific service provider.
Compatibility: Before purchasing a C2G coax splitter, make sure it is compatible with your cable or satellite TV setup and the devices you plan to connect.Different providers and setups may have specific requirements.
Signal Loss: One important consideration when using coaxial splitters is signal loss. Each time a signal is split, there is some degree of signal loss. Higher-quality splitters often have lower signal loss, which is measured in decibels (dB). Be mindful of signal loss if you plan to split the signal multiple times.
Installation: Installing a coax splitter is relatively straightforward. You connect the incoming coaxial cable to the input port of the splitter and then connect the output ports to your devices. Use appropriate coaxial cables and connectors for a secure and reliable connection.
Signal Quality: Poorly installed or low-quality splitters can degrade signal quality, leading to issues like pixelation, signal dropouts, or reduced picture and sound quality. Using high-quality splitters and connectors can help maintain signal integrity.
Amplification: In cases where signal loss is a concern due to multiple splits or long cable runs, you may consider using a signal amplifier (also known as a signal booster) in conjunction with the splitter to boost the signal strength.
Maintenance: Periodically check and ensure that all connections are secure and free from corrosion or damage to maintain the best signal quality.
C2G coax splitters are commonly used in residential and commercial settings to distribute TV signals efficiently. When selecting a splitter, it's essential to consider your specific needs, the number of devices you want to connect, and the signal quality requirements to ensure a reliable and clear TV signal to all your devices.
Below you can find our editor's choice of the best c2g coax splitters on the market
Extreme 3 Way Unbalanced HD Digital 1GHz High Performance Coax Cable Splitter - BDS103H
Extreme Broadband
Product description
Extreme 3 Way Unbalanced HD Digital 1GHz High Performance Coax Cable Splitter - BDS103HB
- 7.0 dB / 7.0 dB / 3.5 dB out
- 5-1000 MHz/EMI - 130dB
- High performance 1 by 3 coaxial splitter (1 in, 3 out)
- Used by many telecos
- Manufacturers Part No.: BDS103H
User questions & answers
| Question: | Is this an AC power pass splitter |
| Answer: | Yes and I'm not sure. |
| Question: | Will this work on a comcast modem for tv and internet? Can i hook up to 3 tv's |
| Answer: | Hi Chriswlan, thank you for your question. Yes, each OUT port is protected by a diode. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you. |
| Question: | the -3.5dB leg gives less loss than the other 2 right? I want to split a router and 2 TVs and need to know if i can reliable play video games on this |
| Answer: | No, this splitter does not have a male end. All 3 ends are female |
| Question: | What is the difference between Unbalanced and balanced Extreme 3 Way splitter |
| Answer: | If you are asking about the four-way, it would have to be at least 7 db or it would violate the law of conservation of energy. 3.0 dB loss is 50%, so a two-way splitter ideally is close to 3 dB.. A 4-way that has only 3.5 dB loss per port would be putting out more power that comes in. 7dB is a factor of four loss. |
Extreme 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter BDS102H
Extreme
Product description
Extreme Broadband BDS102H 2-Way Digital Coax Splitter
- UNIVERSAL MOUNTING: Mounting The Device In The Best Configuration Regardless Of The Location. Mount Vertical Or Horizontally Eliminates The Need Of Additional Screws Or Mounting Hardware.
- EXTENDED PRODUCT LIFE: Zinc Allow Die Cast Housing And The Back Covering Plate Eliminates "Galvanic" Corrosion Caused By Dissimilar Metals. This Combined With The Sealed Housing Ability To Withstand 15psi Of Internal Pressure Waterproof The Electronic Components Inside The Device.
- SEALED F-PORTS: Indoor, Outdoor, Wet, Dry Or Humidity, The Pressure Tested Sealed F-Ports Eliminate The Possibility Of Moisture Ingress.
- CIRCUMFERENCE CENTER CONDUCTOR SEIZING: Every F-Port's Center Conductor Seizing Mechanism Utilizes A 4-Sided Coaxial Compression The Provides 8 - Coaxial Surface Contact Area Conforming Precisely To The Surface Of The Center Conductor Formed In A Progressive Die.
- SMD PCB Component Insertion Technologies - Extreme Broadband's Manufacturing Processes Enhances The Electrical And Mechanical Performance. This Provides Consistent Device To Device Operation.
User questions & answers
| Question: | which one of the cable spliters are compatable with time warner |
| Answer: | As far as I know it is not the ventech version. |
| Question: | Is this used for splitting hd cable box and internet? i feel like i'm not getting hd quality cable |
| Answer: | Yes, it does have roller buckles |
| Question: | There is a single cable line coming into our room, but my roomate and I have two different monitors. Can this split the cables for two monitors |
| Answer: | It’s about 4 inches |
| Question: | Is this the kind of splitter I need to hook up my modem and cable tv at same outlet location |
| Answer: | This is the conversion table. Horse Height Western English 13H to 14H (Small Horse) 30 38-40 14H to 15H (Small Horse) 30-32 42-44 15H TO 16H (Medium Horse) 32-34 46-48 16H to 17H (Large Horse) 36 50-52 |
Extreme 6 Way Balanced HD Digital 1GHz HIGH Performance Coax Cable Splitter - BDS106VF
Extreme
Product description
Extreme Broadband BDS106VF 6-Way Balanced Digital Coax Splitter
- 9.0 dB / 9.0 dB / 9.0 dB / 9.0 dB / 9.0 dB / 9.0 dB
- 5-1000 MHz/EMI
- Manufacturers Part No.: BDS106VF
- Vertical Flex Mount
User questions & answers
| Question: | i've noticed other 6 way splitters have this design, why is that? even length of wire to each port |
| Answer: | I purchased these for my little dog to give support to one hind leg until other hind leg heals from surgery. Tape didn't cause any problems to her leg hair at all. Tape doesn't pull or stick. So tape won't hurt bird feathers either I believe. |
| Question: | does extreme not sell a FLAT 6 way splitter |
| Answer: | I don’t known. First time I ordered it I got the 4 inch. Last time I was surprised to get the 2 inch. Seems they send whatever they have. |
| Question: | Will this work with a lava hd8008 omni-directional outdoor antenna |
| Answer: | No difference between them. Same product. Take it from a retired DVM. |
| Question: | Does this any power? We want to use on the outside cable to bring the antenna into the house. We gave six connections, so this is perfect |
| Answer: | This is a packet of multi color and solid/ design pattern. I received different colors than the ones above |
Extreme Broadband Manufacturing BDS104H 4 Way HD Digital High Performance Coax Cable Splitter
Extreme Broadband Manufacturing
Product description
Extreme 4 way splitter. Extreme 4 way splitter 5-1000MHz balanced. Digital splitter supports the latest digital cable frequency requirements.
- Extreme 4 way splitter 5-1000MHz balanced
- Digital splitter supports the latest digital cable frequency requirements
- Extreme 4 way hd digital high performance coax cable splitter BDS104H
User questions & answers
| Question: | I just added another tv, need to replace 3 way comcast splitter with 4 way..do I need a special one from comcast or will this one work?? Thanks |
| Answer: | I am not sure exactly what you need to solve the issue. HD picture not only depends on splitter, but also depends on Coax cable. You may need high quality coax cable. RG-6 shielded (not quad shielded) all the way from HDTV to main box and all in between. The more cable runs, the more you loose the quality. So, you need to make sure as short as possible your cable length. You can measure HD quality with measurement machine. Here is an article "How Much Signal Do I Lose Going Through Coaxial Cable?"http://support.channelmaster.com/hc/en-us/articles/200383695-How-Much-Signal-Do-I-Lose-Going-Through-Coaxial-Cable-Hope, this helps you and solves your problem. |
| Question: | I just need to hookup 4 ota tv's will this work or do i need a power pass splitter |
| Answer: | yes, it should. |
| Question: | will this work as well when used as a combiner (multiple OTA antennas-->HDTV |
| Answer: | yes&No -For the best broadband internet connection -The cable coming to your home should go to a 2way splitter (1 in to 2 out) with one of the cables coming out going DIRECTLY to your modem. The other cable coming out can be split again to your TVs. If you are coming from a wall outlet (& have more than 1 wall outllet in your home), then that cable has already been split & you should not split again before going to your modem. You'd be better off hooking up your modem to a different wall outlet, rather than split again. Now if you have no choice, & you have to split after the wall outlet, then this splitter will do fine, & hopefully you wont have any connection problems. Our comcast cable was split coming into the home & then we used a splitter as you are planning to & our internet was fine for years (except that it had to be reset often). Then cable Co made some recent "upgrades" and our speed dropped & problems increased. I did some research & found that degrading the signal with splitters is worse on internet than it is on TVs. Now we get much higher speeds by being sure cable running to our home is split with cable carrying 1/2 the signal to modem with no splits in between & other 1/2 to a 2nd splitter then TVs. So if you do split again after outlet this is just something to consider if you have connection problems. Good Luck. As a point of reference: there are unbalanced 3way splitters. These have 1 line in & 3 out I believe they still send 1/2 the signal to 1 cable out & then split the other 1/2 of signal between the other 2 cable outs. I have been trying to find out if this is better choice since I have only 2 TVs I would then have only the one splitter where cable comes in. I'm sure that would be better choice for TVs, but haven't been able to confirm that signal strength is as good for modem as above configuration. |
| Question: | can it combine 2 coax cables, twc internet w/ hdtv roof antenna, to 1 single coax cable, and split it back to 2 coax cable signals in the house |
| Answer: | We love this girth. The quality and workmanship is great but I am pretty sure the buckles are standard size. You might go on perri's site first to identify more info about product. I think they also have an 800 # - you might call them?Good luck! |
Cable Modem & MOCA Premium Coaxial 2-Way Splitter Ideal for Bidirectional RG-6 RG-59 Communications
Antronix
Product description
The CMC2002H series digital splitter by Antronix is a premium grade passives designed specifically for two-way multimedia broadband applications.
Our low inter-modulation design & optimized return band (5-42MHz) prevents high cable modem signals from affecting forward band transmission. Therefore, the CMC series digital splitter is ideal for multimedia applications, i.e; video, telephony, and transmission sensitive digital signals such as QPSK, QAM & IPTV data.
- Broadband Cable TV's most respected manufacturer of subscriber premise devices.
- NOT FOR SATELLITE TV SWM INSTALLATIONS
- 6kV ring wave IEEE Testing Proceedures for surge protection on all F ports, for lightning & over voltage events
- Nickel alloy plating for the highest level of corrosion resistance in all environments.
- Introduces -3.5dB Avg signal loss (-3.7dB @ 1002MHz)
User questions & answers
| Question: | Candace splitter work with an antenna |
| Answer: | The way my system is set up I couldn't tell you if there's a flicker. Not had a issue that affects game play at all. |
| Question: | Hi, Does this splitter produce broadband output that can be used with cable modem(surfboard 6120) ? Please let me know |
| Answer: | No. This a simple analog A/V switch. |
| Question: | Why is there a ground screw on this. What do you tie onto that ground screw. There should only be a cable used here, right |
| Answer: | I have a Wii, DVD, VCR and HP computer connected to it with one output (both audio & video) going to TV and audio only of the second output going to sound system. It works great with one exception. If you try to listen to audio from both the sound system and TV at the same time there is a slight delay between the two. Not a problem for me cause I use the sound system for movies and the TV audio the rest of the time. |
| Question: | Does have dc power pass |
| Answer: | If you're not going to add another receiver, the last TV can only show the same channel as another TV with receiver. You must do the cabling properly to do this and I know not everyone knows how to do it. But if you're only asking if this splitter works, yes it does. I use this for mine. |
16 WAY EXTREME HD DIGITAL 1GHz HIGH PERFORMANCE COAX CABLE SPLITTER - BDS116H
cableTVamps
Product description
Zinc die cast housing and fully soldered back ensure the best electrical performance in a variety of splitter types and outputs. Precisely engineered electrical components and materials guarantee peak performance in every condition, location, and environment.
Mount the splitter in the best configuration regardless of the situation. Mount horizontally, vertically, or simply snap the splitter into the Infinity Premise Enclosure eliminating the need for screws and hardware. True Flex housing is the most versatile housing ever built.
Indoor, outdoor, wet, or dry, pressured tested to 15 psi, Extreme Broadband's sealed F-ports eliminate the chance of water ingress.
Zinc Alloy Die Cast Housing and Back Cover eliminates galvanic corrosion caused by dissimilar metals. A proprietary plating is also applied to provide additional protection agents. Protect what's inside.
Extreme Broadband's state-of-the-art design enhances the electrical and mechanical performance.
- 16 dB Out On All Ports
- 5-1000 MHz/EMI - 130dB
- Manufacturers Part No.: BDS116H
- Compatible with all cable provider and antennas
- Sealed F-Ports
User questions & answers
| Question: | How to install this splitter in a rack mount system |
| Answer: | It might try, but it holds pretty well and adheres to itself so it should be difficult for your dog to get off. |
| Question: | Will this work with moca network system |
| Answer: | I bought for my own use on my pinky finger that I need to wear a splint on after surgery. This tape is great but I find myself removing and replacing often. I sometimes get the tape on too tight or not in place just right. Unfortunately, doggies will no doubt gnaw on the wrapped paw to get the tape off. The cones for around their heads seem the best option to prevent chewing. |
| Question: | If my cable company recommends -10db to +10db, and this unit is -16b at each connection, is there a solution that would involve terminators or an amp |
| Answer: | There's no need. It was designed to be used without any pre-wrap. A painless alternative to medical or silk tape. |
| Question: | Does this splitter have or need a power supply |
| Answer: | I don’t know what it is made of. Doesn’t feel like latex to me. |
STEREN Network Switch - Coax Splitter 2 Way - Antenna Splitter - Manual Transfer Switch - Coax Cable Splitter 2 Way - Coaxial Cable Adapter for TV - 2 Way Coax AB Switch for TV - 1 Pack 200-315
STEREN
Product description
2-Way Coaxial A/B Switch
- COAX CABLE SPLITTER: This is the Steren 200-315 2-Way coaxial cable splitter and AB Switch for TV.
- 2 WAY COAX SPLITTER: Switch between 2 connections for antenna, cable, satellite or video games.
- F TYPE COAX CONNECTIONS: Use this RCA switch as a video switcher with F Type coax connections.
- EASY TO INSTALL: No need to unplug wires when switching between devices with our TV AB switch.
- HIGH ISOLATION 90 DB AB SWITCH: Eliminate interference from external devices and cross-talk.
User questions & answers
| Question: | Is this water resistant, so I can install outside my house |
| Answer: | 8 inches |
| Question: | Is this device capable of passing power through the switch for a directv swm-3? i have a rooftop and a tripod mounted swm-3 dish for trees |
| Answer: | 8 inches. |
| Question: | Does it work backwards? Can I have one input and two seperate outputs? ie: use this instead of a splitter? Is there any db loss like with splitters |
| Answer: | Inside Width 1" hole center to hole center 2 1/2" |
| Question: | Anyone know the gigahertz range of this device? (i.e. 2-2100, etc |
| Answer: | Sold separately. Normally you just need a girth extender on one side. |
New Antronix digital ready 8 way cable splitter CMC2008V for CATV and antenna
Antronix
Product description
Reliability, quality, and performance define the Antronix CMC2000 series digital splitter. The vertical digital splitters have been designed specifically for today’s two-way broadband networks. The digital splitters are among the most robust in the industry. Every port on each CMC2000 series splitter is 6 kV ring wave surge protected, while our proprietary ferrites remain ultra-linear following several surges.
- Brand new in the package.
- You can split your TV signal up to 8 times. Not made for satellite.
User questions & answers
| Question: | How many days does it take to ship this item |
| Answer: | Yes, the blue is a Royal Blue |
| Question: | Does this include power supply |
| Answer: | This tape is supposed to stick to itself and does not, I returned it and got another brand, and it does not tear without the use of scissors, which I wanted..but the whole idea of this tape is that it sticks to itself |
| Question: | Can this be used with frontier fios fiber internet and set top boxes |
| Answer: | Not that I know of I am highly allergic to latex I have not had a reaction with this brand |
Monoprice 6inch RCA Female to 2-RCA Male Digital Coaxial Splitter Adapter
Monoprice
Product description
This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding to prevent signal degradation caused by EMI and RFI interference. This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content but it can also be used for composite video and other line level RCA signals. This splitter features a single RCA female jack on one end and a pair of RCA male plugs on the other end. The purpose of this is adapter to split a single RCA output to send to two RCA inputs. Note that this should be used only as a splitter. Combining audio signals could result in damage to your audio equipment. The proper way to combine audio signals is through an audio mixer. Features:. Gold plated RCA male connectors. Rubber-covered molded connector housings. 97% pure oxygen-free copper conductor. Double shielded with copper braiding. 22 pF per foot capacitance. 75 ohm impedance
- This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding
- This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content
- it can also be used for composite video and other line level RCA signals
- Item weight: 0.12 pounds
User questions & answers
| Question: | Tv has digital audioout coaxial port &sound system has red&white rca port. i have coaxial chord. will i be able to hear tv sound through sound system |
| Answer: | Yes I think so. Two year old grandson enjoys this as well as older sister. You can use as many of the pieces as they can manage. |
| Question: | Will this work if I am tying to hook up my Vizio sound bar with 1 digital coaxial input to my blu ray player and DTV box. My TV does not have an optical connection, so I have to go thru each component. Thanks |
| Answer: | It rests on the floor. |
| Question: | Does this ship ups/fedex/usps... Important to know because in my location some are more reliable than others at delivering |
| Answer: | It is a dense foam. I’m 125 pounds and can stand on it without leaving a dent, but I don’t know at what weight it would begin to leave dents or dips in it. |
| Question: | This is a digital audio coax multi channel splitter right? for example: to combine two audio home powered systems? any advice or best approach |
| Answer: | Sorry, I ordered & have the blue one. Great balance bean! |
Optical-to-Coaxial or Coax-to-Optical Digital Audio Converter Adapter, ROOFULL Premium Bi-Directional Digital Coaxial to/from SPDIF Optical (Toslink) Audio Signal Converter/Repeater
ROOFULL
- 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input
- 【Audio Format】 Support multi-channel surround sound, uncompressed LPCM/PCM audio and compressed 5.1 audio including Dolby Digital (AC3), DTS to audio processor or A/V receiver with capacity of decoding audio source. The highest support 192 KHZ sampling rate. Noise-free transmission
- 【Easy to Setup】 Plug and play, no need any software and driver. Come with 5V1A power adapter (support 100V-240V input), no need to prepare by yourself
- 【Long Distance】Use Optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters (98 feet); Use the standard Digital Coaxial cable output can be up to 10 meter (32 feet)
- 【Wide Compatibility】Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port.
User questions & answers
| Question: | Unlike your digital optical to analog audio converter, will the optical to coaxial digital give me 5.1 surround sound |
| Answer: | Hi Jon. I am not seeing a spec listing for the OD. I can say it is designed to work with a dual shielded RG59 connector |
| Question: | Will this model splite 1 optical in to 2 optical out |
| Answer: | hi, rg6 crimping f connectors. thanks |
| Question: | Is there any lag when using this converter? Even a small amount |
| Answer: | That is correct the rg6 is larger |
| Question: | Will this model split 1 coaxial to one optical and one coaxial |
| Answer: | Front of this unit has inputs for Audio, Video and S Video. The inputs are conveniently accessed from the front of the unit. Outputs are accessed on the back of the unit. Hope this information was of assistance. |
Ancable 5-Pack Coax F Type Terminators Caps with 75 Ohm Resistor for Unused F Connector Ports Jacks on TV Amplifier Splitter Antenna Booster Wall Plate
- Used to cap off unused F connectors on booster, splitter, amplifier, coax cable and wall plates.
- Help reducing signal loss and reflection caused by open ports. Improve other devices reception. The signal loss can interfere with other digital equipments, like noise and broken pictures on other TVs. Also used to keep ports clean, block dust and moisture.
- HIGH QUALITY: Connectors are built with nickel-plated brass for long lasting performance, while it reduces attenuation and enhance transmission capacity.
- EASY INSTALL: Scrow on unused ports, easy to put on and take off.
- PRICE SAVING: This listing comes with 5-Pack it saves you much and makes you always have enough backup
Antronix 6-way RG6 Splitter Coaxial Signal CMC2006V Cable HDTV 1GHz 1002MHz
Antronix
Product description
Reliability, quality and performance define the Antronix CMC2006V 6 output vertically ported broadband splitter. the device has been designed for today's bi-directional broadband networks. Low intermodulation distortion and 40dB of output to output isolation prevent high powered D3 (DOCSIS 3.0) & D2 (DOCSIS 2.1) cable modems distorting same band digital picture content from being degraded. All ports are capacitive coupled to prevent hum modulated distortion. The device equally splits and distributes CATV and OTA HDTV video to up to six devices. .
- Antronix brand devices most highly respected in the broadband industry for over 35 years.
- Eclipse Contact Technology (ECT) F-ports - Provides 400% more contact surface area for lower contact resistance and higher reliability.
- 6kV ring wave surge protection - All ports are protected against multiple 6 kV ring wave surges per IEEE Spec C62.41.
- Digital broadcast and HDTV ready - Compatible with existing and future networks.
- Zinc Alloy diecast housing and backplate w/ proprietary Nickel Alloy Plating - Superior corrosion resistant plating
User questions & answers
| Question: | Is this compatible with Cox |
| Answer: | probably 2 to 2 1/2 inches |
| Question: | Is this the model that Spectrem uses or do they use the professionsl model thats available on amazon |
| Answer: | Yes, it maybe a little long but you can cut it. Im using it on a 52. |
| Question: | why cant you use it for satellite connection |
| Answer: | I think these will work well they are self adhesive and hold very well |
| Question: | Will this splitter support MoCA |
| Answer: | It was made in China, The package itself has a sticker to state - Made in China |
Latest Reviews
View all
Led Projectors
- Updated: 04.06.2023
- Read reviews
Inflatable Boat Tubes
- Updated: 17.01.2023
- Read reviews
Rust Remover For Metal Cage
- Updated: 19.02.2023
- Read reviews
Trim Ring For Recessed Lighting
- Updated: 09.01.2023
- Read reviews
Bench Cnc Milling Machine
- Updated: 22.02.2023
- Read reviews