3 best ir kits

IR kits, or Infrared kits, are electronic accessories used to extend the range and capabilities of remote controls.These kits are commonly used in home entertainment systems and other applications that involve remote control devices. Here's what you should know about IR kits:

Infrared Technology: Infrared (IR) is a wireless communication technology that uses infrared light to transmit signals between devices. Many remote controls, including those for TVs, DVD players, and audio systems, use IR signals to communicate with their respective devices.
IR Extenders: IR kits often include IR extenders, which are devices designed to extend the range of IR signals. They consist of an IR transmitter (or emitter) and an IR receiver. The transmitter is placed near the remote control, while the receiver is placed near the device that needs to be controlled.
Remote Control Range: The primary purpose of IR kits is to increase the range over which remote controls can operate. Without an extender, remote controls have limited range, and they may not work properly if the device is too far away or obstructed by walls or other obstacles. IR extenders help overcome these limitations.
Signal Relay: When you press a button on the remote control, the IR transmitter in the kit sends the corresponding signal to the IR receiver, which then relays the signal to the target device. This allows you to control the device from a greater distance or from another room.
Compatibility: IR kits are often designed to be compatible with a wide range of devices, including TVs, audio receivers, cable/satellite boxes, DVD players, and more. They can also be used with universal remotes.
Multi-Zone Control: IR kits are useful for multi-zone audio and video setups, where you have multiple devices in different rooms. With an IR kit, you can control all these devices from a single remote control.
Blaster Outputs: Some IR kits include blaster outputs, which are multiple IR transmitters designed to control multiple devices in the same location. This is especially useful for home theater systems with multiple components.
Wired and Wireless Options: IR kits may come in both wired and wireless configurations. Wireless IR kits use radio frequencies (RF) or Wi-Fi to transmit IR signals, providing more flexibility in placement.
Power Source: Depending on the model, IR kits may be powered by batteries, USB, or an AC adapter. The power source depends on whether the kit is wired or wireless.
Setup and Installation: Setting up an IR kit typically involves attaching the IR transmitter to the remote control and positioning the IR receiver near the target device. Some kits require programming or configuration to ensure proper functionality.
Compatibility with Smart Home Systems: In some cases, IR kits can be integrated into smart home systems, allowing users to control their IR-based devices through voice commands or smartphone apps.

IR kits are a practical solution for extending the range and capabilities of remote controls, especially in complex home entertainment setups where multiple devices need to be controlled from a distance. They help improve convenience and streamline the operation of various audio and video equipment.

Below you can find our editor's choice of the best ir kits on the market

BAFX Products (Infrared) IR Remote Control Extender or IR Repeater Kit - Control 1 to 8 Devices (Expandable to 12!)

Bafx Products

Based on 3 reviews Check latest price

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.

You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.

Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.

Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.

Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!

Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!

Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video

Specs

• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.

Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.

Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

Xantech DL85K IR Receiver Kit

Xantech

Based on 174 reviews Check latest price

Product description

Dinky Link IR Receiver Kit The Xantech DL85K Plasma/LCD/LED/CFL Proof Designer Dinky Link IR Receiver Kit features a small IR receiver that has been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of the receiver allows it to be placed behind speaker grills and still recieve IR commands up to 80ft away. It works with all types of cable boxes, satellite boxes and TV's. Its proprietary ambient noise-supression technology enables reliable operation in any lighting environment including compact flourescents. Works with all types of cable boxes, satellite boxes, remotes and TVs Low profile-easy to hide Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents IR modulation frequency bandwidth: 25-60kHz Reception range: up to 80 ft/24 m* Color-coded connectors for fast, easy installation Works with LED, LCD & plasma TV's and CFL lighting White, silver & black trim kit included to match any AV system

Works with all types of cable boxes, satellite boxes, remotes and TVs
Xantech DL85K IR Receiver Kit
Low profile-easy to hide
Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents
IR modulation frequency bandwidth: 25-60kHz

User questions & answers

Question:	When pointing the remote at the receiver, how many degrees from center could I expect a signal? Thanks
Answer:	No. They are delightful and look like real flames, but as mentioned in another review, they make a slight clicking noise.. Most times you don’t hear it due to other noise. I will buy more.
Question:	Receiver size: Part II see answers to previous ? about this. Some say a small light, 1 said the "whole piece" lites when remote pushed Which is it
Answer:	I have these in front of a mirror on my dresser. They are so perfect. The lighting is enough to see your partner and the timer feature is wonderful. I have them set for 2 hours and they come on every night on there own. Super romantic!
Question:	How long is the IR reciever cable
Answer:	The battery of the remote is CR2025 battery, thank you!
Question:	Can you adjust the IR emitter intensity? This is necessary with the Direct TV cable box/DVR
Answer:	Yes, use remote and select "light" instead of "candle". Thanks.

Infrared Remote Control Extender Kit Infrared Repeater System IR Repeater Kit Control Multiple Devices Hidden IR 2 in 8 Out Support 20kHz-60kHz

Based on 7 reviews Check latest price

Product description

Using IR repeater kit, you will be able to relay the remote controls IR signal to just about anywhere allowing you to place your cable box, DVD player, receiver,

Roku & more hidden away from view but still be able to control them with your IR remote!

Your living room, media room or other TV viewing locations can now be clean, clutter free and looking just like a pro setup your system.

How the IR Repeater Kit works:

The setup is very is simple.

You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes.

From this block, you will run the provided IR receiver cable from the distribution block and place it in a location where you can point the remote control at.

You will need to place this IR receiver no further than 33ft from where you will be using the remote control.

Now, plug one of the emitter cables into the IR repeater and run that cable to where you have your devices being controlled located.

You will paste one emitter head from this cable over the IR receiver on the devices being controlled.

Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Note:

plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IR receiver from any plasma TV or display ability.

Package includes:

1 x Multi-zone IR Repeater Kit

2 x IR Receiver cable

4 x Dual head IR emitters

1 x Manual

1 x Power adapter

✔Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 8 devices.It is equipped with two receiving points, receive infrared signals at two angle.
✔IR Repeater controls up to 8 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
✔The infrared repeater supports the remote control of 20K-60KHz., it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances.
✔High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver,while flashing LED indicates the signal is being sent.
✔Allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!

User questions & answers

Question:	Whats the length of the cable in the emmiter and transmitter
Answer:	Hello John, I did not purchase this device for use with Direct TV equipment. The device works well to remotely control Verizon DVR receiver and other audio and video equipment. I hope this helps. Regards