14 best hdmi transmitters

• 1080P / 60fps: The Unstincer wireless HDMI transmitter uses H.264 codec technology to make the input / output resolution up to 1080P / 60fps, You can enjoy excellent video and audio quality at home or in the office. Note1:Because there is a 0.2 second image delay, it cannot be used in game consoles!Note2:Due to the use of compression technology, the received picture quality is slightly lower than the source picture quality!Note3:Audio output from HDMI, no independent audio output interface!
• Up to 130feet/40meters transmitting range:This Wireless HDMI to HDMI transmitter built-in 5G high-speed module and high-power antenna, unobstructed transmitting range up to 130feet/40meters, Note: 1,Work through walls can only support less than 10 meters, maybe lower!2,Only one set/pair can work in the same environment!
• Work long hours: The super large aluminum radiator has extremely high heat dissipation efficiency. This enables the wireless HDMI transmitter and receiver to work stably for a long time , which is very suitable for monitoring cameras!
• Use Equipment and Application Scenarios: Wireless HDMI extender kit can be used with devices with standard HDMI output interfaces, such as DVD, DVR, IPTV, CCTV, home security cameras, Blu-ray players, set-top boxes, cable / satellite boxes and Computer, etc. Compatibility is very good. Widely used in classrooms, training rooms, meeting rooms, living rooms, roofs, garages, etc.
• Plug and play, easy to use: The wireless HDMI transmitter and receiver are paired. After connecting to your device correctly, you don't need to do anything. You just need to wait for 45 seconds and see the blue light flash before you can use it.

User questions & answers

Question:	Audio not working, how do i fix
Answer:	I've had issues with video present but no audio or broken-up audio apparently due to RF propagation. I have the transmitter in a lower level area and the receiver not directly above it but to one side. There's an oak floor between the units. I've found that positioning of the units and the angle of the antennas can be quite critical and it becomes pretty much a trial-and-error proposition.
Question:	Does it retain the hdmi timecode
Answer:	Yes
Question:	will this work on a desk top computor that has usb ports
Answer:	Hi, it's okay. This is an HDMI wireless extender, which can transmit HDMI audio and video signals. This product has nothing to do with the USB port
Question:	I just used for the first time and after 2 hours they become so hot I as unable to hold them. Is this nomal
Answer:	I've had the same experience with my set. The seller actually alludes to this with one of the "features" listed -- "Work long hours: The super large aluminum radiator has extremely high heat dissipation efficiency. This enables the wireless HDMI transmitter and receiver to work stably for a long time , which is very suitable for monitoring cameras!" What I have done is to avoid placing the units directly on a surface like a finished cabinet by placing them on empty tuna cans (about 3" in diameter) with the open side up to aid in air circulation. I've also employed remote-controlled switches (modified X-10 Appliance modules) so that I can turn the units off after use. It's a little annoying because I have to wait for the units to sync up after they're turned back on, but I'd rather not have them continue to blaze away 24/7. Some type of programmable timers on both units would also work.

Product features

Not Recommended for use through walls!

This product is based on the meeting room design, suitable for working in the open environment without obstacles. It is a very good choice for meeting rooms, living rooms, bedrooms and classrooms! Work through walls only supports below 32ft / 10 meters.

Up to 130 feet / 40 meters range, providing 5G high-speed wireless transmission

Built-in 5G high-speed module and 5G high-power antenna, transmission distance up to 130 feet / 40 meters, suitable for large meeting rooms and large living rooms. （Note: 1. Work through the wall can only support less than 10 meter 2. Only one set/pair can be used in the same environment! Otherwise it will affect the signal transmission and even cannot be used）

Suitable for laptop, set-top box or DVD

This product uses H.264 encoding technology to support HD picture transmission from HDMI source to a TV or projector, and the received image is clear and stable. You can enjoy video and audio at home or in the office. (Note: The sharpness of the received image is slightly lower than that of the source image, and there is a delay of 0.2s.)

Plug and Play

The wireless HDMI transmitter and receiver have been paired before leaving the factory. The design is compact, beautiful, no driver, no settings, plug and play, very convenient to use, you can use it easily at home or in the office!

Mirror and Extend Your laptop Screen Wirelessly

Extend your laptop screen onto a large screen HDTV and enjoy online activities such as shopping and social media. Mirror your laptop and enjoy streaming all of your favorite movies and videos from streaming sites onto a large screen TV.

Automatic pairing

After power-on, TX and RX are automatically paired. The whole process takes 40 seconds. During this time, you do not need any settings until the blue light flashes to indicate that the automatic matching is successful.

Product description

Creating a home theater experience can be costly and confusing with cables running up, down and through the walls. MyWirelessTV2 gives you the freedom to mount your high-definition television almost anywhere in your home without having to invest in an expensive installation project. The MyWirelessTV2 wirelessly connects your HDMI-enabled media devices to your HDTV, allowing you to deliver brilliant, multi-room HD without the cable clutter.

• MOUNT HDTV ANYWHERE WITHOUT THE WIRES – Replaces HDMI cables with wireless technology, so you can stream full HD directly from your cable or satellite box. Ditch the HDMI cable and mount your HDTV anywhere, without sacrificing quality
• HD DIGITAL SIGNAL FOR MOVIES & GAMING– Wirelessly stream clear, 1080p HD 2D/3D video and digital audio (5.1 surround) through walls, floors & ceilings, to your HDTV or projector up to 150 ft away to watch movies, TV shows and do online gaming.
• SUPPORTS HDMI DEVICES – This wireless video HDMI display kit works with TVs and projectors with an HDMI input. The device wirelessly connects to most cable, satellite, Blu-ray, set-top boxes, and other media and gaming consoles with an HDMI output.
• NO WIFI REQUIRED - Place a TV anywhere within 100 feet from the source with included transmitter and receiver. Simply connect the transmitter to a set top box, gaming console, or other HDMI output device and connect the receiver to any HD display.
• USE YOUR EXISTING REMOTE CONTROL – MyWirelessTV2 allows you to use your existing device’s remote control from any room with its unique pass-through infrared ports.
• EASY PLUG ‘N PLAY – Get up and running in minutes with a true plug-and-play experience. Connect the transmitter to the HDMI source, then connect the receiver to the secondary HDTV, and you’re ready to go. Operates on standard 802.11 5GHz.
• ELIMINATE CABLE CLUTTER – MyWirelessTV2 connects your HDMI-enabled media devices to your HDTV, making the HDMI cable obsolete for an organized appearance. Add a TV to your home office or gym with flexibility to set up HDTV nearly anywhere!

User questions & answers

Question:	Can I buy two Mywirelesstv2 & a splitter box & run three tv"s
Answer:	I use a one in and two out splitter HDMI from my VCR (any device that has HDMI) and have two Mywirelesstv2 transmitters paired with two receivers. One is in the kitchen and one is in the bathroom. Both go thru one wall and have an approx 40' distance separation. Work well with the once in a while a little pixalization. Bought all from Best Buy.
Question:	Can i purchase this item (mwtv2kit01) and also purchase a "second receiver" to allow me to send hd signal from surveillance dvr to "two" tv monitor?rs
Answer:	If you can find a "second receiver" for purchase. You need to buy a whole additional kit since a single additional receiver is not available for some reason. And yes, you can manually pair a receiver from a different set to a transmitter from another set. I have that setup. One transmitter, 2 receivers. The menu on the receiver allows pairing with another transmitter.
Question:	Is it possible to pair 2 receivers to a single transmitter
Answer:	Yes with the first model MWTV200KIT-01. You can run up to five receivers from one transmitter. They say no on the new model though I've seen conflicting information about this.
Question:	I have a tv hardwired to cable but want to add outdoor wireless. Will I have to change the plugs every time I want to watch outside
Answer:	No, but what ever you are watching on the tv inside is what you will be watching outside. The system works good if you are not to far away. I have two. One is 15 feet away and the other is 40 feet away. Both work well..

Product features

The Sky’s the Limit - Place Your HDTV Anywhere You Want

MyWirelessTV2 comes with everything you need for fast, easy set up. Place your HD television in any room in the house, regardless of whether or not it’s wired for HDTV. This easy-to-use and easy-to-move Wireless HD Video kit wirelessly transmits live HDTV in your home, so you can watch TV wherever you want. Go ahead, hang a flat panel in the bedroom. Change your mind? Put your HDTV in the second floor family room. Have a party event? You can even move a big screen TV out to the patio for the big game. With Actiontec’s wireless simplicity, you’re limited only by your imagination.

As Simple as it Gets - Plug and Play Set-Up

With MyWirelessTV2, you’ll be up and running in minutes – and rest assured, everything you need to wirelessly transmit HDTV is included. Each MyWirelessTV2 kit comes with a Transmitter and Receiver. Simply connect the transmitter to a set top box, gaming console, DVD player, or other device with HDMI output and connect the receiver to any HD display in the home. And that's it.

How Does It Work?

MyWirelessTV2 uses wireless video HDMI that allows you to place an HDTV anywhere in your home because it transmits your video and audio wirelessly. All you need to do is plug it in. Wireless Video HDMI is a direct wireless connection between your media source and TV, delivering brilliant full HD quality with low latency. Using just a transmitter attached to your cable/satellite box (or other device) and a receiver connected to your TV, creates a wireless connection between the two without any additional setup. They start talking to one another instantly.

Lowest Latency in the Industry - Superior Quality for any HD Content

MyWirelessTV2 is based on Cavium Network's Super Low Latency (SLL) technology, which offers the industry’s lowest compression latency for full HD 1080p60 H.264 encode and decode. The result? You can enjoy superb quality, interactive HD applications throughout the home. For example, watch live TV, share a multi-player game between rooms, or surf the Web on any display no matter where your computer is.

Zero Interference with your Existing WiFi Networks

Unlike other proprietary wireless solutions, MyWirelessTV2 uses standards-based compression, transmission, and transport protocols to securely and reliably deliver HD video throughout your home. As a result, you can rest assured that MyWirelessTV2 will not cause interference with wireless networks running inside your home.

Product description

Pakite wireless HDMI IR extender can stream HDMI video and audio signals from 3D TV, IPTV, DVR, DVD, STB(Set-Top-Box) to TV in 1080p/1080i/720p/576p/480p across the room without losing quality with a working range up to 262 ft.



Note



Transmission Distance will be varied due to the environment.wall, bricks or glass will shorten the signal cover range or cause significant signal loss.



Function & Features



1.Full HD 1080P Video and Perfect Audio Quality

Wireless hd sender delivers up to 1080p@50/60Hz,Perfect for connecting Gaming Consoles, Cable Set-top Boxes and Media Players.



2. Strong anti-interference Faster Transmission Speed

Wireless HDMI adopts smart 2.4/5GHz dual-band WIFI Wireless transmission schemes and having advantages of long transmission distance, no splash, no snow



3. Wirelessly Transmit Up to 262ft Through Wall/Floor up to 65ft

Wireless HDMI extender can transmit HDMI signal no need wiring plug and play. Can transmit HD signal up to 262 feet away in line of sight; can work through walls and floors up to 65ft



4. Built-in IR remote control With HDMI Loop-out

This wireless transmitter and receiver supports IR Remote controller, you can control signal source equipment at the receiver. HDM Loop-out has a zero latency and can use for a local display.



5. Used for Home Theater Office Meeting Project Church

Can use at home,such as you and your family can share the same TV view in different room. Can use at office or church wireless long distance transmission.



6. Standard Accessories

1 x Transmitter, 1 x Receiver, 2 x Power Adaptor, 2 x HDMI Cable, 1 x IR Extender Cable, 1 x User Manual



7. After-sale Service and Quality Assurance

This wireless HDMI extender support free lifetime technical support and free 1 Year Manufacturer Warranty. Please feel free contact us if you need help, any email will reply in 24 hours

• 【Support Full HD 1080p @60Hz, 5G Wireless Transmission】 wireless HDMI extender input/output resolution supports 480p,576p,720p,1080p, the receive image is clear and stable, colorful and high sound quality without noise. Strong anti-interference,faster transmission speed by 5G Wireless dual-band signal
• 【Wireless Transmit 150m 492ft, Can through Wall】 in an open field, this wireless hd sender HDMI wireless signal can up to 150m 492ft(line of sight), if through 1 wall the signal can transmit 10-20m/32ft-65ft
• 【IR Remote Control, Plug and Play】Use av ir transmitter and receiver, you can control source device at the receiver, support 20-60KHZ IR transmission. True Plug and Play, don’t need set up anything, don’t need download any driver, just connect this wireless transmitter and receive !
• 【Low Latency, With Local Loop-out】Delay time between wireless transmitter and receiver is less than 300ms, Not recommended for real-time applications, such as PC gaming,high speed sports.but the loop-out has a zero latency and can use for a local display. Wireless AV sender is the best choice for your office meeting church and home use.
• 【Support Many HDMI Devices, Signal Point to Point Transmit】This wireless hd sender and receiver kit can work with most HDMI-equipped devices, including DVD,DVR,IPTV,CCTV blu-ray players, set-top boxes, cable/satellite boxes and computer systems. can’t support one sender many receivers,but you can use more than 1 pair in same space.

User questions & answers

Question:	How log it is the warranty? i am looking to get it work thru walls. in case it does not work in my working area. can i return it for full refund
Answer:	I bought from Amazon and returned mine for a refund when it did not work in my building. Too many walls.
Question:	Will this work to communicate between a Roku, an Epson projector, and a Visio sound system
Answer:	I do not have this units, so I cannot help from actual experience. With my other experiences with this sort of extender with RCA, the quality could be an issue. My equipment works fairly good when there is direct connection (line of sight) between the transceiver and the receiver. Otherwise it tends to generate unwanted noise both in picture and sound. I would go wired unless the line of connection is secured with no moving object in the middle. Interferences with other WiFi equipment may happen depending on the frequency and channel. My 2 cents.
Question:	I need this for projecting in a small conference room. is it compatible with windows 10 , mac, iphone, and android
Answer:	Yes, We use them for our church via PowerPoint on a PC with Windows 10. It works well.
Question:	This wireless hdmi transmitter can through wall
Answer:	Thanks for your interests. The wireless video signal could cover area as same as WiFi router does in the home. The wireless signal can cross glass wall and wood wall easily, if you need cross brick and concrete wall, pls make sure the distance between sender and receiver less than 10m/30ft.

Product description

Introduction:

J-Tech Digital ® is focused on producing high-quality products that integrate and distribute home entertainment for residential and commercial users. J-Tech Digital has played a major role in transforming whole-house audio, video and home theater for consumers worldwide.

Description:

The JTECH-WEX310 HDMI wireless extender provides the ultimate viewer experience by eliminating complicated cable runs while extending the distance between source and display devices wirelessly with minimal latency. The JTECH-WEX310 HDMI wireless extender kit is ideal for any environment, including areas with high Wi-Fi activity. Upon initialization, the transmitter will scan your 5GHz Wi-Fi networks in search of an unoccupied channel and automatically connect to a free channel to avoid interference. This unique pairing process allows users to connect multiple sets of our JTECH-WEX310 wireless HDMI transmitter and receiver extender kits within the same location, avoiding crossover or interference with a nearby set by pairing each set-in sequence. You can control all your HDMI sources - cable box, DVD/Blu-ray players, gaming consoles and streaming devices such as Roku and Apple TV - with the wireless, wide frequency IR control feature, which allows users to operate a source device even if it’s in a different room.

 

Specifications:

Supported Video Resolutions: 1080p/1080i@60/50Hz, 720p/720i@60/50Hz, 576p/576i@60/50Hz, 480p/480i@60Hz

Supported Audio Format: Stereo (PCM) 48kHz

Transmission Distance: 660ft (201.168m)

HDMI connectors: 19-pin, Type-A, female

Latency: <200ms (.02 seconds)

Power Supply: DC 5V/2A

 

Package Contents:

x1 Transmitter; x1 Receiver; x2 DC 5V/2A Power Adapters; x4 Antennas; x1 IR Emitter; x1 IR Receiver; x4 Wall Mounts

• √ EXPERIENCE HD 1080P@60HZ WITH LOW LATENCY– With a virtually undetectable max latency of 200ms, or .20 seconds, this HDMI wireless transmitter receiver is great for live TV, video games and sports. Connect all your High Definition HDMI devices (cable box, computer, video game console, etc.) and enjoy full 1080p@60Hz resolution
• √ CONNECT MULTIPLE PAIRS WITHOUT INTERFERENCE – Connect up to 5 wireless HDMI extender transmitter & receiver set pairs. No line of sight placement required. No difficulties sending or receiving signals through walls, ceilings, and floors. Each transmitter will scan for surrounding Wi-Fi 5GHz channels, automatically selecting an unused frequency to avoid interference. (NOTE: When connecting multiple pairs, each set MUST be connected and powered in sequence.)
• √ EXTEND UP TO 660 FEET WIRELESSLY – Separate your HDMI source from your HDMI display up to 660 feet (200 meters) away, transmitting wirelessly over 5GHz Wi-Fi bands, eliminating the need to run long cables through or around walls, ceilings or floors.
• √ USB FIRMWARE UPDATE CAPABILITIES – Download any Firmware updates via USB to improve the quality, functionality and usability of this extender. (Please contact J-Tech Digital directly to find out about any updates that have been released or plan on being released.)
• √ FREE LIFETIME SUPPORT – The JTECH-WEX310 HDMI digital wireless transmitter & receiver, like all J-Tech Digital Products, includes a One-Year Manufacturer Warranty and free lifetime technical support from our Customer Support Team located in Houston, Texas - Available M-F 9AM-6PM CST . (Contact information available on the J-Tech Digital Seller Page.)

User questions & answers

Question:	Hello! if i am using hdmi arc, will this pass video from my reciever to my tv and pass audio from my tv back to my av stereo reciever
Answer:	Hello Mohamma R. Haque,The J-Tech Digital HDBitT wireless extenders do not support ARC, Audio Return Channel, functionality.J-Tech Digital Support [email protected]
Question:	Can i use the to send from cable box to backyard for projector? There would be a few walls and probably close to 100ft
Answer:	We are using them in our church sanctuary @100'. The work perfect from 1 transmitter to 2 receivers. Call their number and select technical, very helpful answering my questions beforehand. Even gave me the Amazon part numbers because it was cheaper to buy from Amazon than directly from J-Tech
Question:	Do you have to pair these units each time you power them or will they automatically pair themselves after the initial setup
Answer:	They pair automatically but once there in range of each other but the range can differ for me it says 200 feet range but worked about 50 feet
Question:	Can I use this to capture a live feed from an hd camera to a computer/hd video switcher
Answer:	Yes. I use mine for my Security system DVR. The HDMI extender doesn't care what data is being transferred or received. As long as the data works with a HDMI cable then it should work with the HDMI extender.

Product features

Receiver+Transmitter 1080P 660 Ft

Receiver+Transmitter 1080P 660 Ft

Receiver+Transmitter 1080P 660 Ft

Wireless HDMI Extender 1080p Transmitter & Receiver Kit Auto-Select Frequencies

Receiver+Transmitter 1080P 660 Ft

Product description

J-Tech Digital is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. J-Tech Digital has played a major role in transforming whole-house audio, video and home theater.

Overview:

This innovative transmitter and receiver pair are capable of streaming full HD 1080p video with support for the latest movie content up to 200 ft. away within the home, through walls and ceilings for your desired setup. The extender is based on the latest HDBitT technology which greatly improved the signal stability and transmission range, unlike WHDI technology, for which loss of signal is a common issue.

The J-Tech Digital wireless extender provides full compatibility with HDMI signal up to 1080P FULL HD. The innovative 1x2 function allows you to wireless split HDMI signal to broadcast over 2 TVs. It does not require a line-of-sight placement, so you can keep your home theater devices neatly out of sight. Compared with the single antenna version, the dual antenna version has improved data transmission rate and video stability.

Features：

• Wireless HD audio/video streaming from up to 200 feet away through standard home walls
• Supports two receivers at the same time.
• Wireless Full HD 1080P with HDMI loop output
• Improved data rates and video stability.
• Lockable DC power plug design
• The wide frequency IR control
• Supports video resolutions of 480p, 720p, 1080i and 1080p

Package Includes:

• 1 x Transmitter
• 1 x Receiver
• 2 x Power adapters
• 2 x IR Cables

• 𝐀𝐦𝐚𝐳𝐢𝐧𝐠 𝐕𝐢𝐝𝐞𝐨 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐔𝐩 𝐓𝐨 𝟐𝟎𝟎 𝐅𝐭 𝐀𝐰𝐚𝐲: JTECH-WEX200(JTD-611V3) is the most powerful wireless HDMI extender on the market. Extend an HDMI audio/video signal wireless up to 200 ft (61m) through interior drywall and other obstructions.
• 𝐓𝐰𝐨 𝐑𝐞𝐜𝐞𝐢𝐯𝐞𝐫𝐬 𝐀𝐭 𝐒𝐚𝐦𝐞 𝐓𝐢𝐦𝐞: Connect one transmitter to two JTECH-WEX200R receivers and a local HD display simultaneously! Perfect for sharing content like movies or security systems throughout the house or business!
• 𝐔𝐩 𝐓𝐨 𝟒 𝐒𝐞𝐭𝐬 𝐈𝐧 𝐓𝐡𝐞 𝐒𝐚𝐦𝐞 𝐄𝐧𝐯𝐢𝐫𝐨𝐧𝐦𝐞𝐧𝐭: Connect up to 4 independent pairs of JTECH-WEX200 V3 in the same environment without interference. Users can customize both the SSID and 5GHz operating frequency of each WEX200 V3 set to allow for multiple extender sets in the same environment.
• 𝐕𝐚𝐫𝐢𝐚𝐛𝐥𝐞 𝟓𝐆𝐇𝐳 𝐅𝐫𝐞𝐪𝐮𝐞𝐧𝐜𝐲 𝐒𝐞𝐥𝐞𝐜𝐭𝐢𝐨𝐧: Avoid WiFi and other wireless 5GHz interference in high-traffic wireless areas by choosing the operating channel of your JTECH-WEX200 V3 set. Users can now access the JTECH-WEX200 V3’s web interface to customize SSID, operating channels & more.
• 𝐃𝐞𝐥𝐚𝐲/𝐋𝐚𝐭𝐞𝐧𝐜𝐲 𝐓𝐢𝐦𝐞 𝐢𝐬 𝟎.𝟏-𝟎.𝟑 𝐬𝐞𝐜𝐨𝐧𝐝𝐬: Good for video playback. NOT ideal for real-time shooting or PC gaming. FULL HD Support: 60/50HZ @1080P, 60/50HZ@1080I, 60/50HZ @720P, 60/50HZ@576P, 50HZ@576I, 60HZ@480P, 60HZ@480I Free Lifetime Support: This item includes free lifetime technical support from the manufacture and free 1 Year Manufacturer Warranty from J-Tech Digital.

User questions & answers

Question:	How can I purchase a second receiver from Amazon
Answer:	Go to Amazon and buy one. Or contact the company.
Question:	can two transmitters be used at the same location for different sources
Answer:	I don't see why you couldn't. Just make sure the transmitters with their respective receivers are on different channels. And keep a respectful distance between the transmitters. Bear in mind using two transmitters in the same room might reduce the distance.
Question:	Does anyone have the size (measurements) handy for both the transmitter and receiver
Answer:	Approximately 8 inches wide, 5 inches depth, 2 inches height.
Question:	Which frequency is used for transmission? is it 5 ghz? if it is then i don't think it's going to be good for transmission trough walls
Answer:	I had no luck with transmission through 2 walls with a 30 ft separation. I returned it and purchased J-Tech Digital 2X2 Wireless HDMI Matrix Extender 50M / 164 Ft Supporting 1920x1080 1080P with IR Repeating (1 Transmitter & 1 Receiver included in a set) which work better.

Product description

PAKITE Wireless HDMI Transmitter and Receiver,5G High Speed Transmission 1080 HD Wireless HDMI Extender

Function & Features

-PAKITE HDMI wireless HDMI extender consists of transmitter and receiver and can send the high-definition signal to the receiver end.

-HDMI resolution:720P~1080P@30Hz,SVGA~WUXGA a variety of commonly used computer resolution.

-Adopt international 5G wireless high speed transmitter signal and it has strong ability of anti-interference.

-Adopt external dual-gain antenna,supporting ultra-long distance and even the transmission can up to 200meters(The transmitter distance may be affected by the actual environment).

-Support DVD,DVR,IPTV,CCTV camera,satellite receiver,Digital STB and audio and video output device,on the other hand,you can use IR remote to control DVD,DVR,IPTV,Digital STB and other devices.

-Easy to install,plug and play,small size with exquisite fashion design.The product dimension:158*128*37mm.

-PAKITE wireless module are FCC and CE certificated,so our wireless application is safe and reliable.

After Safe Service

-Come with 1*transmitter(TX),1*receiver(RX),1*IR cable,1*HDMI cable,1*power adapter,1*Box.

-If you still have any trouble during use, please fell free contact our after-sale service:[email protected],and we will offer one year  warranty.

• 【Support Full HD 1080P,5G High Speed Wireless Transmission】PAKITE HDMI wireless transmitter and receiver input/output resolution supports 480P,576P,720P and 1080P,make the receive image and sound clear,stable and colorful without noise.Besides,with strong anti-interference,faster transmission speed by 5G Wireless dual antenna signal,you can enjoy superior video audio quality at home or office.Note: A delay of less than 0.2 seconds might occur due to data compression- Not recommended using for PC
• 【Plug&Play&Easy to Set】Easy to install,true plug and play set up eliminates the need to install expensive and inconvenient cables.Meanwhile,no software or wifi connection required.We have added two buttons so you can switch high-low rate or multi-channel with ease.NOTE:Do not install multiple kits in the same location as it may cause signal interference.)
• 【656FT Long Distance Wireless Transmit】We set up the external dual antenna and get the long transmitter distance that reaches 656 ft/200 meters(line of sight) in an open field and if through 1 wall the signal can transmit 15-20m/49ft-65ft.
• 【Built-in IR Remote Control】With built-in IR signal extension,you can control source device at the receiver and it supports 30HZ IR transmission.On the other hand,the delay time between wireless transmitter and receiver is less than 300ms,but the loop-out has a zero latency and can use for a local display.
• 【Support Many HDMI Devices】PAKITE wireless video transmitter and receiver can work with most HDMI equipped devices,including DVD,DVR,IPTV,CCTV blu-ray players,set-top boxes,cable/satellite boxes and computer systems.Note:One transmitter could only support one receiver,but you can use more than 1 pair in same space.If you have any questions or concerns regarding this product,please contact with us without hesitation.

User questions & answers

Question:	is it okay to leave the transmitter on all the time
Answer:	There will always be output during normal work, TX will keep TX mode, RX will being RX mode and will not be changed, and the software is factory set.
Question:	Can these connect to audio amplifier? I want the sound to go to the amplifier and then output to my sound system speakers
Answer:	You would plug the HDMI transmitter into the back of a HDMI splitter and then your audio cables from your amplifier would also plug into the back of the splitter. The HDMI splitter is essentially splitting the video and audio. Your cable box/dvd player would plug into the side of the splitter. That is how I have my hidef projector set up in my bsmt.
Question:	Will this work with 4G? I do not have 5G yet
Answer:	4G stands for 4th generation cellular. 5G stands for 5GHz. Wireless signals for consumers operate at 2.4GHz and 5GHz. This utilizes 5GHz to communicate between devices.
Question:	For ir pass-through to work, do i need to purchase a separate ir receiver / transmitter
Answer:	The ir pass-through is built in the units. Ir transmitter cable attach to the transmitter. The IR receiver is built in the receiver.

Product features

Best Choice - No splash, No snow, Strong anti-interference

• Q:There is no pictures and audio?
• A:Firstly,check whether the receiver power supply is normal;
• Secondly,confirm that the TV input is correct;
• Finally,check if the HDMI cable is damaged.
• Q:Receive display no signal?
• A:Firstly,check the signal source HDMI output signal is normal;
• Secondly,confirm the output reslolution of the signal source is within the support range;
• Finally,Make sure the source is connected to transmitter's HDMI input.

Best Choice for You

Plug and Play + IR Remote controller + No Wires :Plug in power, and you are ready to enjoy your video content.On the other hand,connect the HDMI cables between your source video device and the HDMI transmitter and between the HDMI receiver and your TV,you can switch and choose what you want to watch.

Suitable for All HDMI Equipped Devices

Compared to others,our wireless video transmitter and receiver can work with most HDMI equipped devices,including DVD,DVR,IPTV,CCTV blu-ray players,set-top boxes,cable/satellite boxes and computer systems.So you could use it without worries.

Ultra-long Transmission Distance

Control what you watch from a more preferable location. Whether it be in your kitchen, dining room or backyard, just point the remote control at the receiver and instantly stream an HD signal to a TV in another room - wirelessly in HD 1080P. No extra cable box is needed.

Product description

The Nyrius ARIES Prime Wireless HDMI Transmitter enables you to watch what you want by streaming from your laptop or any HDMI device to your TV in razor sharp, uncompressed 1080p high definition video with absolutely no loss in picture quality - it's like an invisible HDMI cable.



High Performance Digital Signal

Transmits your favorite TV shows, films, music, sport, & games, through walls, ceilings, & floors (streaming line of sight results in maximum 30ft range).



Unlimited Entertainment on Your Terms

Now you can watch movies stored on your computer & content from services like YouTube, Netflix, or other video streaming websites, on your big screen HDTV. Revel in the independence of no longer being limited by wires, software applications, TV schedules or your cable bill.



Cut the Cord for Good

Wires are a disadvantage of modern electronic devices. They disrupt the style of your room, they are a potential tripping hazard, & they limit where your devices can be located. The NPCS549 removes wires from the equation, allowing you to place HDMI devices where you want them.



Simple Plug & Play

The ARIES Prime's convenient plug & play setup gets you watching wireless video fast. There's no software required - all you have to do is plug the transmitter & receiver directly into your device's HDMI connections & you're immediately connected.



Full Compatibility with any HDMI Source & Display

While optimized for use with laptops, the ARIES Prime media streaming stick wirelessly connects any HDMI device to your HDTV or projector. Unlike other streaming sticks, the Prime is true HDMI mirroring - what you see on your HDMI source is exactly what you see on your TV in real time. The powerful, high-speed digital signal won't interfere with Bluetooth, WiFi, or any other wireless network.

• Wirelessly stream true 1080p high definition 3D video & digital audio to your TV or projector. Watch movies & TV shows from your laptop, PC, Mac, A/V receiver, gaming console, cable/satellite
• Transmitted signal is crystal clear, able to stream uncompressed HD video & audio with ease. Signal experiences zero latency (real time) even when streaming 3D video to a 1080p device
• Easy to install plug 'n play set up eliminates the need to install expensive, inconvenient cables. No software or WiFi connection required. Transmitter: 1 x HDMI input, Receiver: 1 x HDMI output
• High performance digital signal transmits through walls, ceilings, & floors (streaming line of sight results in maximum 30ft range)
• Compact low profile design makes it perfect for laptops and works with any HDMI video device

User questions & answers

Question:	does this work with WiDi sender? i.e. Would it work without dongle if i have a WiDi laptop
Answer:	I would say that the answer is no. The Nyrius transmitter and receiver are designed to work with each other. If you have built-in WiDi, you do not need any dongle. But . . .you will still need to purchase a receiver that works with WiDi.Here is a link that will give you some basic information.http://www.pcworld.com/article/2044749/its-a-widi-shootout-actiontecs-screenbeam-pro-vs-netgears-push2tv.htmlThe Nyrius can be a little fickle during the setup but once I got it dialed in, I was (and am) extremely satisfied with its function and display. Based on current technology, I think the Nyrius setup (and dongle) is the way to go.
Question:	Hi, 1) what frequency is used & can it be chanaged?, 2 ) is encryption supported and, if so, what type
Answer:	The transmission frequencies of these units are 4.9~ 5.9GHz (with Dynamic Frequency Selecting (DFS)). 256 encryption that can not be changed.
Question:	There doesn't appear to be a passthrough. So if I want both screens on, I also need to buy a splitter
Answer:	Both screens? If you want to 2 displays to show the same you need to buy an HDMI Splitter with 1IN and 2 or more OUT. I use this to stream the signs from a PC to 4 tv's with a splitter.
Question:	Does transmitter have to be within line of sight of receiver to transfer signal or not? Does it require an open USB port in the back of tv
Answer:	The receiver (TV side) does not need USB connection for data, but needs powered via something, be it a wall connection or a USB. The transmitter needs a USB port to supply power with the supplied cable. You do not need to be line of sight for it to work. We actually put the receiver in a closet and were able to transmit to it over 30 feet away through 2 drywall and wood stud walls. I hope this helps.

• Easily extend 1080P HDMI video and audio signal up to 300ft line-of-sight without wires! Simple plug and play installation with no complicated setup or configuration. Powerful dual antenna design and 5GHz signal band reduces interference and increases range. Note: range is reduced indoors due to doors, walls, and interference.
• Built-in HDMI signal splitter in the Transmitter unit provides an HDMI output jack, which can connect to a near by TV using an HDMI cable - there is no need to buy a separate HDMI splitter!
• IR signal pass-back function relays remote control commands back to playback source, IR signal receiver and blaster cables are included!
• 0.07 to 0.2 second transmission latency depending on signal quality - great for movies, TV, videos, and presentations. May not be suitable for some types of gaming or PC use.
• Video: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz. Audio: PCM Only. NOTE: Dolby and DTS NOT SUPPORTED. NOTE: If multiple sets of the transmitter and receiver are installed near each other, only powered on one set at a time to prevent signal crossing.

User questions & answers

Question:	Can i connect my roof antenna with this device
Answer:	If it is a HDMI connection that you are trying to extend wirelessly then yes. If it is coaxial then this would not be helpful
Question:	Can this works with multiple receivers or more than 1 receiver
Answer:	No it cannot. I contacted the factory, and they said one transmitter to one receiver only.
Question:	Can i connect my canon camera that has an hdmi port
Answer:	As long as you have an adapter that goes from your camera to a full size hdmi port, it should probably work as it is just taking whatever signal is supplied to the TX module and sending it to the RX module. I have not tried it though.
Question:	If I buy 2 of these for separate signals will there be interference between the two
Answer:	Ii am seeing the receivers switch between 2 receivers. Very annoying They are not paired. I suggest keeping them very apart or only using 1 pair.

Product features

General Specifications

• Power Source: DC 5V/2A AC Adapter
• Power Consumption: TX: 7W; RX: 5W
• Electrostatic Protection: IEC61000-4-2 Contact Lvl 3 Air Lvl 3
• Working Temperature: 32~122°F
• Humidity: 0~90%, no condensation
• Weight: TX: 6oz (170g); RX: 6oz (170g)
• Dimensions (TX, RX, no antenna): 5.20” (W) x 0.87” (H) x 3.54” (D)

• HDMI Version 1.3; HDCP Version 1.2
• Formats: 480i/p@60Hz, 576i/p@50Hz, 720p@50/60Hz, 1080i/p@50/60Hz. Audio: PCM Only
• IR Signal Compatibility: 20-60kHz
• Wireless Band: 5GHz, 10.2Gbps data rate
• Wireless Range: 330ft (100M) clear line-of-sight
• Wireless Latency: <200ms

Product description

Specification:

It transmit HDMI signals by means of radio waves and can be used for wireless sharing of HDMI signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other HDMI devices of several TV sets. Only one set can be used in one space. Cannot use multiple sets. Because it is on the 2.4G/5.8G channel. So there may be a delay.

Wireless HDMI transmission solutions are suitable for large video meeting systems and multimedia class rooms.

With an external CCD camera, it can realize real-time field image monitoring in applications such as security system.

It can also be used in HDMI transmission applications where the HDMI cabling is difficult or expensive.



Package:

1 x Transmitter

1 x Receiver

2 x Power adapter

1 x Operation Manual

• The latency time is 150ms
• Frequency ：5.8GHzand 2.4GHz dual band
• Only one set can be used in one space. Cannot use multiple sets. Because it is on the 2.4G/5.8G channel. So there may be a delay.
• It takes a while for the product to start to connect. Please buy carefully.

User questions & answers

Question:	does this work with MAC computers? Also does it just mirror display or will it act as an extended screen as well
Answer:	It mirrors, but not 100% on if compatible with mac.. hope I helped a little..😊

Product description

FHD676 HD wireless transmission is a wireless transmitter for home HD audio and video entertainment. It consists of a transmitter and a receiver . Usually, the HD set-top box of home needs to be connected to a HDTV (or projector) through a HD cable. The HD cable has a length limit , and the set-top box is also placed at a relatively fixed position.Especially when connected to a hanging projector, it brings a lot of inconvenience to the user with wire.



If you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR control extension function.

The signal can be clear and smooth through a single non-high-density wall or ceiling, with zero interference of image and sound.



Specification

It's TX connect PC Blu-ray Player,STB,Media Player,anf output Loop back TV,RX output from 660 feet(open space),like as 2 extra receivers.

Frequency : 5.8GHz / 2.4GHz

Transmission range:660feet/200m

Input/output interface : HD interface

Housing material :Transparent plastic

Power input : 5V / 1A

Machine size :128*93*26mm

Operating temperature:32~104℉/0~40℃

Resolution:1080p@60Hz

HD1.4, HDCP1.4

The latency time is 150ms



Note

And if receiver side didnt have picture,only sound,pls plug the receiver power supply and HD cable again,may for receiver and HD cable not good connection.And half a meter HD cable is excellent working

And this product could not go through brick walls,open a window signal could go through.



Package

transmitter*1,receiver*1, power adapter*2，user manual*1, IR cable*1

• Full HD VIDEO TRANSMISSION: Transmit 1080p wireless video within the same room, up to 200' m away wireless extender
• MULTIPLE RESOLUTIONS SUPPORTED: HD Port,The resolution is up to [email protected] with HD Source and Display-Source:Laptop,PC,Netflix,YouTube,PS4, Xbox 1, Drones, Pro Camera,Blu-ray/DVD players,set-top boxes, AV
• DIRECT FROM REMOTE LOCATIONS: Connect the transmitter to an HD camera and the receiver to an HD monitor, power the transmitter with any nearby USB connection, such as a laptop, camera USB port, or even a 5VDC 2A power bank to transmit and capture wirelessly while on set
• PORTABLE TRANSMITTER & VARIOUS POWER OPTIONS: The compact size and shape of the transmitter makes it great for conference room settings and can be shared easily between your source and display.
• Wireless HD Sender.It can easily pass through one wall, and can be up to 200 M in the open space.Transmit audio video from laptop,PS4,games,media player to monitors av sender.NOTE: If you encounter obstacles. Transmission may be delayed.

User questions & answers

Question:	Would this work with any hdmi output such as phones with hd capability
Answer:	Yes
Question:	Which operating frequency is in use, 2.4 or 5.8 ghz, or both? if it does use 2.4, does it overlap known wifi or zigbee channels
Answer:	I am using 2.4 wifi. I can't answer concerning 5.8 or zigbee.
Question:	Will this work with DirecTv receivers
Answer:	I’m not sure how well this product works because I haven’t tried it, but you can use a wireless HDMI transmitter/receiver with Directv. I’ve been using a Nyrius Aries Home to connect my Directv DVR to my HDMI switch for years without any issues.
Question:	Can i hook this up to a samsung security dvr and send the signal to the tv monitor in a different room
Answer:	If the DVR has a HDMI output and the TV has an HDMI input, yes. Please keep in mind that the building construction has a dramatic impact oh performance.

• ✔ [196FT LOSSLESS EXTENSION] The DDMALL HDMI extender kit extends video/audio from an HDMI source to a display up to 196ft with ZERO loss and ZERO latency over one CAT5e/6 cable. Maximum resolution up to 1920×1200@60Hz. It supports HD audio for a full range of audio types, including Dobly TrueHD, DTS-HD Master Audio, and LPCM7.1/DTS/Dobly-AC3/DSD. You will be amazed at how this mini extender show you Full HD video/audio with super stability and reliability, even at 196ft away from your source.
• ✔ [POWER SAVING] Featuring ultra low power consumption of only 1.7W, this extender kit uses about 80% LESS power than traditional extenders. This means you're using less energy to do the same job, reducing your home's or office’s energy waste and saving money. It supports POC, which means you'll only need one power source to power the extender. It can be powered from any USB connection (e.g. a USB port on media box, projector, HDTV, etc). Forget about bulky AC adapter, we've got you covered.
• ✔ [NO HDMI CABLES NEEDED] This compact extender kit has been specially crafted for your smooth and tidy installation. It features a small footprint and a built-in golden-plated HDMI Type-A male connector that connects directly to your video source and display, reducing clutter by eliminating the need for extra HDMI cables. Compact size that can be hidden on the back of TV, projector and various devices simply. No more cable mess, no more extra cost!
• ✔ [PLUG AND PLAY] No external driver or software needed. Built-in advanced Auto EDID Emulation technology allows the extender to copy EDID information from EDID compliant displays and assures accurate display performance; no additional configuration needed. Connect your HDMI source to the Transmitter, run a CAT5e/6 cable from the Transmitter to Receiver, and connect your HDMI display to the Receiver. Then power the extender using any nearby USB connection. It's that easy!
• ✔ [BUY WITH CONFIDENCE] Designed and constructed of only top quality materials that exceed industry standards. At DDMALL, we pride ourselves on providing innovative and high quality A/V products to our customers. We believe in our products, that’s why we are confident in offering 3-YEAR worry-free manufacturer warranty and free lifetime technical support. REMINDER: This extender is designed and manufactured by DDMALL. Please be aware of imitations.

Product features

DDMALL 196ft Full HD HDMI Extender

Long Distance

The DDMALL HE-15 extends signals from an HDMI source to a display up to 196ft in Full HD over a single CAT6/7 cable.

Zero Signal Loss

Delivers audio & video simultaneously with no compression or signal loss over 196ft distance.

Easy Installation

Compact size that connect directly to your laptop, media player, projector, no extra HDMI cables needed. The receiver can be hidden in the back of projector, TV and powered from the nearby USB port. No adapter needed.

Key Features

Product description

With support for Full HD resolutions up to 1080P @60Fps, you can place your HDTV or HD projector anywhere up to 150ft wirelessly from the video source without sacrificing picture and sound quality. Enjoy a stunning audio/video experience with the convenience of wireless HDMI and the flexibility to eliminate cable clutter and move your TV to the patio or den for the big game or parties. Effectively transmit powerful long-range digital video across wide open spaces and living areas up to 150ft. Save the time and expense of hiring installers to run HDMI cables through the ceiling and walls. Plug-n-play - The wireless HDMI TV connection kit comes with everything you need inside the box to get started quickly. The kit includes 2 compatible HDMI cables, so there is no need to worry about shopping for the right cable. Connect the HDMI cables between your source video device and the HDMI transmitter and between the HDMI receiver and your TV. Plug in power, and you are ready to enjoy your video content. Setting up the kit is hassle-free and does not require a Wi-Fi network or complicated security configurations. The included Transmitter and receiver come ready with security enabled and are paired to create an independent wireless network connection. 150ft wireless range with a 150ft wireless range, This kit will work in open space living areas to deliver full HD video and audio for your home application. The kit is perfect for hiding your A/V equipment across the room, keeping your HDTV cable-free while avoiding the clutter and eyesore or cabling. Enjoy a seamless integration and a clean look where ever you want to place your TV. Control source device remotely - Infrared (IR) support control your source a/V device directly from your TV. Just point your remote at the TV with the included IR blaster to control your devices. Change the channel, pause, play, fast forward, and control any other function of your cable, satellite box, DVD or Blu-Ray player and any other A/V equipment in your system. The IR blaster will transmit your remote Control functions to your source devices as if they were right there.Radio Frequency:5.8 GHz

• Transmits high definition video and audio up to 150ft
• Supports resolutions of up to 1080P @ 60fps
• Supports infrared (IR) remote signal transmission to control source device
• Plug-n-play solution. Hdmi 1. 3V and HDCP compliant. Wpa security protection - already paired
• Perfect applications are for the living room, patio, man/lady cave, supporting events, garage. Video streaming up to 10. 2 Gaps
• Backed by IOGEAR’s 1-year and FREE lifetime technical support
• WPA security protection - already paired

User questions & answers

Question:	My set top box only has one hdmi output. What do I connect the transmitter to
Answer:	Thank you for choosing IOGEAR. You would connected the HDMI output of your set top box to the HDMI input of the transmitter. The HDMI out on the receiver connects to the HDMI input of the remote television.
Question:	how do you connect to a windows 10 PC
Answer:	If your intention is to send the signal (wirelessly) from a PC to a TV (or projector), you would need to have an HDMI output on the PC. The transmitter (from this kit) would be connected to the HDMI output on the PC. The receiver (from this kit) would then be connected to an HDMI input on the TV. The signal is sent wirelessly from one location to the other and then converted to usable HD (at the TV).
Question:	What is the amount of latency? Will it work for iMag, Games playing, or to transmit a live camera
Answer:	IOGEAR says : The Latency is around 200ms . This is not recommended for IMAG or Game playing . As long as the camera had a direct HDMI connection to the transmitter this kit will transmit a live camera feed. For Virtually no Latency please check out the GW4K30GH60. Thank you for choosing IOGEAR
Question:	Can I use a powerbank to power the transmitter
Answer:	Thank you for choosing IOGEAR. It is not recommended but as long as the powerbank you choose outputs the proper voltage and amperage it technically should work.

Product features

Eliminate Cables Without Sacrificing HD Quality - Features

• Transmits High Definition Video and Audio up to 150ft
• Supports resolutions of up to 1080p @ 60fps
• Supports Infrared (IR) Remote signal transmission to control source device
• Plug-N-Play solution
• HDMI 1.3V and HDCP Compliant
• WPA security protection - already paired
• Applications:
  • living room, patio, garage
  • man/lady cave
  • sporting events

Control Source Device Remotely - Infrared (IR) Support

With a 150 ft. wireless range, this Kit will work in open space living areas to deliver Full HD video and audio for your home application. The Kit is perfect for hiding your A/V equipment across the room, keeping your HDTV cable-free while avoiding the clutter and eyesore or cabling. Enjoy a seamless integration and a clean look where ever you want to place your TV.

Package Content:

• 1 x GWHDKIT11 Transmitter
• 1 x GWHDKIT11 Receiver
• 2 x 3 Foot HDMI Cable
• 1 x IR Blaster Extension cable
• 1 x IR Receiver Extension cable
• 1 x 5VDC/2A Switching Power Supply
• 1x Quick Start Guide

Plug-n-Play

The Wireless HD TV Connection Kit comes with everything you need inside the box to get started quickly. The kit includes 2 compatible HDMI cables, so there is no need to worry about shopping for the right cable. Connect the HDMI cables between your source video device and the HDMI transmitter and between the HDMI receiver and your TV. Plug in power, and you are ready to enjoy your video content.

Setting up the Kit is hassle-free and does not require a Wi-Fi network or complicated security configurations. The included transmitter and receiver come ready with security enabled and are paired to create an independent wireless network connection.

Requirement:

• HDMI Source Device
• TV or Projector with HDMI Input

NOTE: *Ideally best performance is obtained using line-of-sight. Distances may vary depending on environment. Solid and non-porous materials such as steel, concrete, brick and glass (varies depending on coating and thickness) may cause shorter viewing distances or loss of signal.

• 【Full HD 1080p @60Hz, 5.8G Wireless Transmission】wireless HDMI extender input/output resolution supports 480p,576p,720p,1080p, the receive image is clear and stable, colorful and high sound quality without noise. Strong anti-interference,faster transmission speed by 5.8G Wireless dual-band signal.Compatible with HDMI 1.3 (High-bandwidth Digital Content Protection) and Loop-out 1080P full HD signal to the local monitor.
• 【IR Remote Control, Plug and Play】 Dual antenna for strong signal broadcast and long distance transmission.Simple and convenient installation, plug and play. No complicated cable or wire installation needed . NOTE:This product cannot go through walls，and Do NOT install multiple kits in the same location as this may cause signal interference.
• 【Multi-HDMI Devices, Signal Point to Point Transmit】This wireless hd sender and receiver kit can work with most HDMI-equipped devices, including DVD,DVR,IPTV,CCTV blu-ray players, set-top boxes, cable/satellite boxes and computer systems. can't support one sender many receivers,but you can use more than 1 pair in same space.
• 【Built-in 5.8G High Speed Wireless Transmission Signal】Support 4 groups of channels.We uses the5.8G wireless high speed transmission signal,get faster transmission speed and stronger anti-interference ability.The use of external dual-gain antenna can be transmitted over long distance, the distance of the open transmission can reach 196ft.Note:A delay of less than 0.2 seconds might occur due to data compression- Not recommended using for PC gaming.
• 【100% Customer Satisfaction Guarantee】If you have any questions or concerns regarding this product, please do not hesitate to contact us and let us serve you with heart.We regard your satisfaction as our greatest motivation.The price is reflected in the quality.With 100% money back full refund guarantee and 12 month warranty,there is nothing to worry about.So give this powerful Wireless Hdmi Sender and Receiver a try.Rest assured to purchase!

User questions & answers

Question:	Works with sky Q black
Answer:
Question:	Can this device also send and receive remote cable signals to the TV and vice versa to the cable box to change channels, etc
Answer:
Question:	can I send the TV screen to the laptop with this product
Answer:
Question:	What is the amount of latency? Will it work for iMag, Games playing
Answer:

Product features

Piug and Play

1.First connect the HDMI cable, the signal source connect Sender (transmitter) IN input; local display device connect Sender (transmitter) OUT output.

2.Then connect the receiver to a remote display device (such as a television, a splicing screen and so on)

Compatible Devices

HDMI displays, such as monitors, and HDTVs;

HDMI source device, such as computer PCs, Blu-ray players, and media players.

1080P@60HZ Full HD Transmission

1080P@60HZ Full HD Transmission

Control your source A/V device directly from your TV.

Just point your remote at the TV with the included IR blaster to control your devices.

Change the channel, pause, play, fast forward, and control any other function of your cable, satellite box, DVD or Blu-ray player and any other A/V equipment in your system.

IR Control Passback

1. Support max resolution up to 1920x1080P@60Hz Does not support 1080i. 2. Transmit audio and video signals over wireless signals up to 196ft. 3. Built-in ESD electrostatic protection circuit, provide all-round protection. 4. Support IR control function, more convenient to operate the HDMI source. 5. Antenna design significantly improves the quality and reliability of a wireless link. 6. Simple to install, just need to plug and play without any complex setting or cables.

Local Looppout

supports vivid, high-definition videos up to 1080p @60Hz. Compatible with HDMI 1.3 (High-bandwidth Digital Content Protection) and Loop-out 1080P full HD signal to the local monitor.

Up to 60m

Control your source A/V device directly from your TV.

Just point your remote at the TV with the included IR blaster to control your devices.

Change the channel, pause, play, fast forward, and control any other function of your cable, satellite box, DVD or Blu-ray player and any other A/V equipment in your system.

The IR blaster will transmit your remote control functions to your source devices as if they were right there.

Dual antenna 5.8G

Control your source A/V device directly from your TV.

Just point your remote at the TV with the included IR blaster to control your devices.

Change the channel, pause, play, fast forward, and control any other function of your cable, satellite box, DVD or Blu-ray player and any other A/V equipment in your system.

The IR blaster will transmit your remote control functions to your source devices as if they were right there.

Product description

This HDMI wireless extender includes transmitter unit and receiver unit, allows to transmit and extend HDMI signal up to 50 meters long away wirelessly, it has strong anti-interference ability by running at 5GHz operation frequency, and supports point to point connection. IR passback with 20-60KHz frequency helps to remote control the source device from the receiver side. It is really a very good solution for meeting, conference, home entertainment and multi-media education etc. Note: 1) Transmission will not go through Wall. Direct Signal Only.

• Extend Full HD 1080P Signal upto 100 Feet Wirelessly. Will not Transmit through Walls, Direct Signal Only. Using Channel 128 & 132 on a 5 Ghz Wireless Band
• Connect the Transmitter to an HDMI Camera and the Receiver to an HDMI Monitor, Power the transmitter with a Mirco USB Cable to the laptop or Even a Power Bank.
• Support point to point wireless connection, Support: HDMI 480i 60HZ, 480p 60HZ, 576i 60HZ, 576 50HZ, 720p 50/60HZ, 1080i 50/60HZ, 1080P 50/60HZ, 20
• Plug & Play Setup without any Software Installation. ~50Khz IR Devices Supported
• Includes: 1 x Transmitter, 1 x Receiver, 1 x Power Adapter, 1 x IR Blaster Cable, 1 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's Warranty

User questions & answers

Question:	What frequency range does this device use? can you use multiple pairs(transmitter/receiver) in area without interference(ie office environment
Answer:	Yes, using the video extender transmitter.
Question:	What hdmi 6" (or so) extension cable to you recommend to use to plug the thing into hdmi port... power connector in the way on hp
Answer:	Yes, both image and audio signals can be transmitted. Support video format: VGA, SVGA, XGA, UXGA. Support video resolution up to: 1920 x 1440@60Hz.
Question:	What is the power adapter input voltage range ? Is it 110V - 240V
Answer:	110V
Question:	Can you hard wire power the dongle using a 5v transformer rather than the USB connection
Answer:	No. It just works off a cat5 or 6 cable direct no modem, switch or hub.

Product features

Cut The Cords!

Sick of constraining cables and a messy entertainment area? Tired of untangling knots in cords?

Simplify your digital life with our wireless HDMI streaming device.

Eliminate the added stress of cables and adapters, and choose the digital solution that works flawlessly between devices.

Mount your TV Anywhere!

From the kitchen, to the dining room, to your patio, mount your TV anywhere without worrying about restrictive HDMI cables!

Watch your favorite sports game on your patio TV, or turn on the news in the kitchen. With the OREI wireless HDMI streaming dongle, you’ll never have to worry about being shackled by HDMI cables again!

Transmit Over Wifi!

Our wireless dongle streams your favorite content at lightning fast speeds over your home's WiFi connection.

Razor sharp media and gaming, in a lossless format. Compatible with all HDMI TVs.

Stream Your Favorite Shows

Never miss an episode again! Our wireless converter is easy to use, ensuring that you never miss any of your favorite shows or content. No messing with connections or trying to sync your devices. Just plug and play!

Compatible with all HDMI TVs!

No need to worry about complicated cables and strange adapters. Our wireless dongle fits all standard HDMI enabled TVs. Support includes: HDMI 480i 60HZ, 480p 60HZ, 576i 60HZ, 576 50HZ, 720p 50/60HZ, 1080i 50/60HZ, 1080P 50/60HZ.

Quality Assurance

At OREI, we stand behind every single unit we ship. You can rest assured knowing we use only the highest quality materials. We have world class customer service, and love to hear from our loyal fans.

Perfect for Creators and Presentations.

Our wireless HDMI transmitter makes presentations a breeze. Don’t worry about fussing around with cables in the board room before the big presentation, or while meeting with a client. Just plug into your device, and enjoy the freedom to move and walk with your device.

And at OREI, we realize that picture quality is important. That’s why we designed our transmitter to send Full HD 1080P Signal up to 100 Feet Wirelessly.