14 best a b speaker selectors
A/B speaker selectors are devices commonly used in audio systems to manage multiple sets of speakers connected to a single amplifier or receiver. These selectors allow users to choose between different sets of speakers or to play audio through multiple sets simultaneously. They are often used in home audio setups, distributed audio systems, or environments where there's a need to control audio in different zones.
Here are some key features and functions of A/B speaker selectors:
Speaker Switching:
- A/B speaker selectors typically have switches or buttons that allow users to choose which set of speakers (A or B) they want to activate or deactivate.
Multi-Zone Audio:
- In multi-room audio setups, these selectors enable users to play audio in specific rooms or zones by selecting the corresponding set of speakers.
Impedance Protection:
- Many A/B selectors include impedance-matching protection, which helps prevent damage to the amplifier by maintaining a safe load on it, especially when multiple sets of speakers are active.
Volume Control:
- Some models come with volume controls for each speaker set, providing additional control over the audio levels in different zones.
Compatibility:
- A/B speaker selectors are designed to work with various speaker types and amplifier/receiver setups.They usually support both high and low impedance speakers.
Ease of Use:
- These selectors are designed to be user-friendly, with clear labeling and straightforward controls for easy operation.
Distribution of Audio Signals:
- In addition to speaker selection, some A/B selectors can distribute audio signals to different zones or rooms, enhancing the flexibility of the audio system.
Applications:
- A/B selectors are commonly used in home theaters, whole-house audio systems, outdoor audio setups, and commercial environments where audio distribution is required.
When using A/B speaker selectors, it's important to follow the manufacturer's instructions, especially regarding impedance matching, to ensure proper functionality and prevent damage to your audio equipment.
Below you can find our editor's choice of the best a b speaker selectors on the market
Monoprice 108231 2-Channel A/B Speaker Selector - Black with Volume Control, Built in Independent Volume Controls, Accepts Wire Gauges Up to 14AWG
Monoprice
Product description
Spread your music everywhere. A key element of any home audio distribution system is a speaker selector. The speaker selector allows you to distribute your source signals to several sets of speakers distributed throughout your home. Additionally, a good speaker selector like our 2-channel a/b selector listed here, will allow you to have different source audio sent to different rooms so that someone in one room can be listening to something different in another room. Most importantly, a speaker selector provides impedance matching, which ensures that the additional speakers do not overload or damage your Amps. The Monoprice msv-2 is a dual source 2 zone speaker selector with built in independent volume controls for each source. This device can handle up to 100 watts per channel. It supports a frequency range of 20Hz to 20Khz. Accepts wire gauges up to 14AWG and maintains load at 8 ohms.
- Supports up to 100 watts/channel
- Distributes two stereo audio sources to up to two destinations
- Supports bare speaker wire up to 14AWG
User questions & answers
| Question: | What gauge wire does this accept |
| Answer: | Yes it does. We use it to play music simultaneously indoors and outdoors when entertaining. It's a great little setup. |
| Question: | Has anyone used larger than 14AWG wire in the ports, would like to use larger wire for a very long run |
| Answer: | It will work for what you want to do. The unit is better suited for 8 ohms speakers. Currently I'm using 4 ohms but not a great idea. If you drive the power too much you will blow the mono price. I also think that it's better suited for using 1 amp and two set of speakers. |
| Question: | Will this do A+B Speaker playback simultaneously |
| Answer: | yes |
| Question: | I want to connect two amps and volume control to two sets of speakers. Will this work? Do the speakers need to be similar Ohm wise |
| Answer: | it comes in a amazon shipping box |
Product features
Monoprice 2-Channel A/B Speaker Selector with Volume Control
Monoprice brings everything within reach of the average homeowner by offering a wide selection of Home Audio Distribution accessories.
A Key element of any home audio distribution system is a speaker selector. The speaker selector allows you to distribute your source signals to several sets of speakers distributed throughout your home. 2-channel A/B selector listed here, will allow you to have different source audio sent to different rooms so that someone in one room can be listening to something different in another room. Most importantly, a speaker selector provides impedance matching, which ensures that the additional speakers do not overload or damage your amps.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
A/B A+B Switch 1 in - 2 Out 2 Way Stereo Receiver Speaker Set Selector
Product description
Hi, we have for sale a new Stereo Speaker Selector Box. Switch an audio source from Speaker Set A to Speaker Set B or Combine Both (A+B Speakers please check for impedance compatibility with your amplifier when using A+B). This can be useful if you have speakers wired to another area in your home but have one audio source.
- 2 Way Stereo Speaker Switch Panel
- Select Speaker Set A, B or A+B (1 IN - 2 OUT)
- Sturdy Metal Construction
- Self Adhesive Rubber Feet Included
- Note: Speaker Selector is Limited to 200 watts per channel continuous music power
User questions & answers
| Question: | How do you wire from the amp to the switch? It only has one red and one black connext |
| Answer: | It will connect to anything that has a 1/4-20 mount. |
| Question: | What is the largest gauge wire that can be used |
| Answer: | I would think that as long as it has the hole on the bottom that you can screwed into it would work with any camera. This seems to be a good product but haven't really used it yet. . |
| Question: | Can you use this to toggle between two stereo amplifiers or is it just to toggle between speakers |
| Answer: | If your camcorder is over a pound (1lbs) then absolutely NO! The plastic handles that lock the legs extended will explode and break, do not risk your camera on this thing. |
| Question: | At what resistance (in Ohms) is the 200w continuous power rated? I can't find any literature on these speaker controllers |
| Answer: | I am not experienced with DVX cameras, however, if your camera has a hole on the bottom that fits a 3/4 inch rough cut screw, then it will work with this tripod! |
| Question: | Will this work with gopro |
| Answer: | The tri-pod comes with a block that screws into the bottom if many different camera models. If your camera has a threaded hole in the bottom it should fit. |
| Question: | Will this work with a Nikon J1 ? Thanks |
| Answer: | Far less than 1 lbs actually, any camera over 1 lbs WILL cause the plastic on the leg locks to break. The specified bearing weight is clearly a lie, don't fall for it. This tripod can not hold a heavy object, much less its own weight. |
OSD 4 Zones Speaker Selector w/ Volume Control 300W Impedance Matching Dual Input On/Off SSVC4
- SOUND QUALITY: The audio stays at a consistent quality with the SSVC4 to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
- IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging the equipment.
- POWER: This speaker selector allows you to distribute an amplified signal for up to four zones throughout the house, letting you choose which source is playing in each designated zone.
- DURABLE: The SSVC4 features a 16 gauge steel construction with durable black wrinkle powder coating and gray silk-screening. There are screw down terminals to the cable to never become loose.
- DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
User questions & answers
| Question: | Can you tell me what the warranty is on this product |
| Answer: | 300 is about right. Any larger and the spkr wires won't fit. 16 gauge max |
| Question: | Can I connect this to my receiver via bluetooth |
| Answer: | We have a 100W amp connected to our speaker selector (actually the 8 channel one) and we can drive both the floorstanding speakers in the main room and all 7 rooms with in-ceiling speakers around the house to any volume we like with excellent fidelity. IF you already have a receiver and you're thinking about a new one to use with the selector, you can always use the old ton and connect it to the second source, and now you have 2 possible kinds of music to switch around the house. WE have the Amp, CD, and IPad on source A, with an old receiver for AM/FM on source B, so we can have one program playing in some rooms, and a second in the other rooms. |
| Question: | what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS |
| Answer: | Accepts Wire Gauges Up to 14AWG |
| Question: | What do I need to look for in a receiver to pair with this volume control selectors |
| Answer: | 14 gauge is tight but will work. You need to be very careful stripping the wire so you do not get stray strands while inserting. Another option is to use a short pigtail of 16 gauge and transition to 14 gauge. Impedance loss is linear so a few inches of 16 gauge will have no impact on losses |
Product features
Dual Source
The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.
Volume Control
Using the same technology as our in-wall volume controls, most units offer volume control per zone.
Impedance Protection
Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.
Easy to Install
Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.
OSD Audio 4-Zone Dual Source Speaker Selector
The SSVC4 speaker selector lets you add up to four speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.
in Wall Speaker Selector Switch - Home Audio 2-Channel A/B Dual Channel Speakers Controller Pod Box - Control and Activates (2) Pair of Indoor or Outdoor Speakers - Pyle PVCS2
Pyle
Product description
PyleHome Model : PVCS2In-Wall / Wall Plate Speaker SelectorIn-Wall Speaker Selector Switch, Wall Plate Speaker Control Features: Convenient Speaker SelectionSimple Push Button Operation Possible Configurations: A, B, or Both (A + B)Terminal Block Speaker ConnectorsUniversal Standard Wall Plate SizeFits Standard Electrical Junction / Gang BoxesCompatible with All Audio / Video SystemsIncludes decorative Frame Plate Cover120 Watt Load Power HandlingThe Pyle PVCS2 is an in-wall A/B speaker selector switch that installs in a junction box, just like a light switch. This switch makes it simple to direct your home amplifier's audio to two sets of speakers, such as one set indoors and one set outdoors. Activate the A speakers, B speakers, or both. Easy push button operation allows you to activate or deactivate your speakers quickly. The included wall plate frame cover allows for a clean installation for your walls. Take control of the audio with the Pyle PVCS2 Wall Plate Speaker Control Selector Switch.
From the Manufacturer
- EASY TO INSTALL: The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
- PUSH BUTTON OPERATION: The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
- CONFIGURATIONS: Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
- UNIVERSAL COMPATIBILITY: The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall plate frame cover means this switch will unobtrusively blend into your wall and allows for a clean installation on your walls
- Connector type: usb
Product features
In-Wall Speaker Selector Switch
The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly.
PUSH BUTTON OPERATION
The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
EASY TO INSTALL
A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
CONFIGURATIONS
Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
UNIVERSAL COMPATIBILITY
The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
4 Channel Speaker Selector Switch - Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Amplifier Receiver System - Pyle PSLSW4
Pyle
Product description
Pyle Model : PSLSW4
4-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System
Features:Technical Specs:
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
- CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
- INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
- EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
- OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability
User questions & answers
| Question: | Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you |
| Answer: | Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps. |
| Question: | I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together |
| Answer: | Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps. |
| Question: | Can the speaker connectors take banana plugs as opposed to threading the wires |
| Answer: | I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly. |
| Question: | So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to |
| Answer: | Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though. |
Product features
4-Ch. Speaker Selector System
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.
CONTROL 4 SPEAKERS
The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
INDEPENDENT AUDIO CONTROL
Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.
EASY SETUP
Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
Protection
Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.
Watt
The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
Dimensions
The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS8)
Pyle
Product description
PyleHome Model : PSS8
8-Ch. Stereo Speaker Selector
8 Channel High Power Stereo Speaker Selector
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
- PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
- Up To 8 Separate Speakers Pair To Your Stereo System
- Accepts Speaker Wires Up To 14-Gauge
User questions & answers
| Question: | Does this unit have impedance matching transformer feature |
| Answer: | Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you. |
| Question: | I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device |
| Answer: | I think you will be fine, depending on how long your wire runs are. |
| Question: | Can you use it the opposite way....multiple recievers to one set of speakers |
| Answer: | No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera |
| Question: | How can it be both new and improved |
| Answer: | Increase connectivity range |
Product features
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR
The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE
The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.
PLUG AND PLAY EASY INSTALL
The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 4 Pairs Of speakers - Pyle PSPVC4
Pyle
Product description
Up to 4 Separate Speaker Pairs to your Stereo System Accepts Speaker Wires Up to 14- Gauge Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms Protection Circuitry Keeps it Running Smoothly Individual Speaker Volume Control Support Two Stereo Amplifiers Frequency Response: 20Hz-20KHz Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D) Sold as: Unit Weight: 9.32 lbs. This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- BEST PERFORMANCE SPEAKER SWITCH WITH VOLUME CONTROL:The new and Improved Multi Channel stereo speaker selector with volume control can control the volume and select what speaker you want to play without have to go to the amplifier each time.
- CONTROL POWERED 4 CHANNEL AMPLIFIER: With the 4-channel a/b/c/d speaker selector w/ volume control You Can Control the volume and Switch on of each speaker or play all speakers at the same time.From and high power and low powered stereo amplifiers
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Volume Control Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is powered by your stereo - Just plug in the wires to Control any High Powered Amplifiers from Pyle Crown Denon Sony Panasonic Yamaha and Many More.Control 4 10 4 6 8 inch Speaker Box.Frequency Response: 20Hz-20KHz
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch and Volume Control we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
User questions & answers
| Question: | Is this rack mountable |
| Answer: | Hi, no it is not mountable. However, you may customize your own rackmount. Thank you. |
| Question: | can I use this amp with my sony str 1030 reciever to add additional power |
| Answer: | This is not an amp. It takes an output to speakers and can run different sets of speakers. If you do not have enough power in your receiver to run the speakers it will not work. Each time you turn on a set of speakers it will drop the power by a percentage. Some receivers can not handle more then three sets. |
| Question: | Can one of the zones I hook to be a powered subwoofer (which itself feeds a pair of small speakers |
| Answer: | No you cannot hook up a powered sub woofer to a speaker selector |
| Question: | Will this work with an old devon dra 35v receiver from the mid 80s? i have 4 pairs of speakers and might need to use at least three pairs at a time |
| Answer: | I do not recognize the Receiver you are referring to but the connections are very simple. The speaker wires that are driving your speakers will be shortened and then connected to the Pyle Home speaker selector. Then your speakers will be connected to the Pyle Home speaker selector to each of the different four zones that you have in your home/office/whatever. I am presently driving three pairs of speakers with one zone unused. I have had perfect performance. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- Up to 4 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Frequency Response: 20Hz-20KHz
- Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D)
In Wall Speaker Volume Control - Home Audio Smart 2-Channel A/B Dual Channel Speakers Controller Selector Pod Box - Rotary Knob Fader Control Up to (2) Pair of Indoor or Outdoor Speakers - Pyle PVCD15
Pyle
Product description
PyleHome Model : PVCD15
Volume Control Wall Plate
In-Wall Right and Left Speaker Dual Knob Independent Volume Control Plate
The PVCD15 In-Wall Volume Control System is a convenient, easy way to control the volume of your home speakers. This dual-knob wall plate installs in a junction box in your wall, just like a light switch. It's unobtrusive, clean, and matches your decor. Control up to 2 speakers with the independent rotary faders. Standard and universal style wall plates included.
- EASY TO INSTALL: The Pyle in-wall stereo volume control installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
- ROTARY KNOB OPERATION: The indoor outdoor speaker controller features a convenient and simple rotary knob controls which makes volume adjustments a breeze! Control up to 2 speakers with the two independent rotary faders
- OPERATION: Set the amplifier's volume control to minimum. Turn on the amp and set its volume control slightly above the normal listening level. To increase/decrease the remote speaker's volume turn the inwall volume control clockwise/counterclockwise
- UNIVERSAL COMPATIBILITY: The 2 channel speaker volume fader is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. It also features up to 120 watts load handling power
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls
User questions & answers
| Question: | Instructions are unclear vs markings on the unit. does '+' mean in ..and '—' mean com? (it appears such in the schematic) jim |
| Answer: | Yes. We put a speaker selector on it and have it wired to 2 sets of speakers. 1 set has 2 speakers and 1 set has 4 speakers. |
| Question: | What colors does this control come in |
| Answer: | Hi sounds like you dont want to see the tranformer , with cable running down the wall. What I did with mine if you know about wiring electrical and things like that I cut the wire from my Transformer to the unit and I made it longer and I run a wire up into my attic where I have a light switch with a plug .plugged in the transformer ,made the wire longer so now it's a hard wire unit basically that's what it looks like because all you see is just the unit in the wall with the faceplate no wire sticking out of it and that's how I did mine don't know if you have access to your attic and if you have a light up there with an outlet but that will be the best way to have a clean job for it, hope this will help a bit, also to your question, this unit comes with a 120v to 12 volt dc converter |
| Question: | Can I use this for two source inputs and one output? IE: Channel A = (inA, comA = Chromecast); Channel B = (inB, comB = other source); out=speakers |
| Answer: | I assume you are referring to the bluetooth name. I have 6 units, they all use the same name, but that isn't a problem, because they don't advertise unless you push the volume knob. After you pair each one, rename it on your phone, no need to rename on the receiver, the phone can tell them apart. So if you have previously paired to a phone, when you turn the unit on it will try to reconnect to its existing paired device. If you want to pair to a new device, press the volume knob while you are scanning for devices from your phone, then rename it in bluetooth settings on your phone after it is paired. The only time you are going to have an issue is if you press the volume knob on 2 devices at the same time, you wont know which is which, but since you probably cant be in 2 rooms at once to do that, shouldn't ever be an issue, and whichever one it pairs to, you can rename to distinguish which is which.. |
| Question: | Does this control 2 speakers or 2 pairs of speakers? The pictures are deceiving and I don't see it noted. Thanks |
| Answer: | try Pyle Audio www.pyleaudio.com |
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS6),Black
Pyle
Product description
PyleHome Model : PSS6
6-Ch. Stereo Speaker Selector
6 Channel High Power Stereo Speaker Selector
- Up to 6 Separate Speaker Pairs to Your Stereo System
- Accepts Speaker Wires up to 14-Gauge
- Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
- Protection Circuitry Keeps It Running Smoothly
- Frequency Response: 20Hz-20KHz
- Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector |
| Answer: | There is no difference in for the install if you mount speakers in the wall or ceiling. |
| Question: | Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver |
| Answer: | I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick). |
| Question: | How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A |
| Answer: | I would recommend a 5.1 home audio receiver. |
| Question: | can i play all 6 speakers at the same time |
| Answer: | The pyle pta44bt would be a good amp for the speakers. |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
OSD Audio 7-Zone Automatic Speaker Selector – Dual Source and Remote Control – ATM7
OSD Audio
- SOUND DISTRIBUTION: This speaker selector allows you to distribute an amplified audio signal to seven zones throughout the house, letting you choose between two music sources in each designated zone.
- POWER: Since this ATM-7 is a passive device with no built-in impedance protection, we recommend using our impedance matching in-wall volume controls so that the load doesn't affect your amp in a negative way.
- DESIGN: Multi-Zone Enable (2 In Working Mode), Zone In/Out Select, Dual Music Source A or B (2 In Mode) or output channels (7 In mode) located on the front, Master-Slave switch when connecting 2 ATM7 in parallel on the back.
- FEATURES: Perfect for your stereo needs, an IR Remote Controlled Front Panel Status LEDs for Power, Multi-zone, Master/Slave, Zone In/Out Select, In/Out Mode and Zone Out/In Selector and can be mounted/controlled in remote location.
- IR REMOTE: The ATM7 includes an IR remote control that has backup memory function and a 10-meter remote operating distance. Easily program the remote control of any of your favorite universal remote controls with the provided code.
User questions & answers
| Question: | When the unit is power cycled, does it retain it's last setting for each speaker zone? Or does it default to either 'on' or 'off' for each zone |
| Answer: | Hello, looks like Amazon has the incorrect information for this item.Tripod weight: 5.88 lbs (2.67kg)Shipping weight: 8 lbs |
| Question: | Does the 7 zone with remote model maintain settings after the power is disconnected/reconnected |
| Answer: | If I remember correctly, this is a tripod only. Most folks who buy a good tripod like this have a specific head in mind, or, like me, already have one. I have a ball-head that works great. Really like this tripod. |
| Question: | What does 2x source mean? And does it come with wires to connect to the receiver |
| Answer: | Hello. Yes, so long as the slider you are using will accept either a 1/4"-20 or 3/8"-16 head mount thread then you should be able to use it with no problem. The only issue would be that with no head on the tripod - this item is for the tripod legs only - your capacity to change the orientation / level / etc of that slider is going to be limited. Please let us know if you have any additional questions. Have a great day!Deven MorganEvent Cameras |
| Question: | does this work with onkyo |
| Answer: | The 615317 also seems to cost $20 more. |
Product features
OSD Audio 7-Zone Dual Source Speaker Selector
This 7-zone speaker selector allows you to control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously. The ATM-7 includes an IR remote control; with a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to your favorite universal remote control.
OSD Audio Multi-Room Audio System Package 200W A/B Two-channel Dual Source Amplifier, Speaker Selector, 100W Impedance Matching Rotary Knob Volume Control (4-Zone Kit)
Product description
If you're wondering how to set up multi-room audio, it's easier than you think. We take the guesswork out of picking some of the basics for a multi-zone setup. This 4-zone audio system from OSD Audio lets you separately control music in 4 different rooms, and the audio quality is pristine and beautiful. With this multi-room stereo system, all you'll need to do is select the best speakers for each room and run the wires. Outdoor Speaker Depot is your premier source for home entertainment systems and audiophile audio systems, and we're here to answer any questions you have.
When you choose your speakers, keep these simple rules in mind. For rooms that are 150 square feet or less, 5.25-inch speakers are a good size. Select 6.5-inch speakers for rooms that are 200 square feet and larger, and 8-inch speakers for rooms that are bigger than 400 square feet. As for speaker style, Contractor and Custom series speakers are good for background music. For stronger bass and louder sound, see our High Definition series. The Kevlar series speakers have the best overall sound that's ideal for a home theater and audiophile tastes. In the Trimless series, the speakers are designed to blend into your decor.
Included in this kit:
AMP200 amplifier
ISS4 speaker selector
SVC-100 volume controls
User questions & answers
| Question: | Can you listen to different music in each room |
| Answer: | 8 Ohms. Don't worry, it's just a dry contact set of switches and the are heavy duty. I'm running 250 Watts per channel with absolutely no distortion or hiss. Great changeover switch. |
OEM SYSTEMS COMPANY IW-101 Pro-Wire Source/Speaker Switch, White
OEM SYSTEMS COMPANY
Product description
OEM SYSTEMS IW-101 Pro-Wire Source/Speaker Switch, WhiteOEM SYSTEMS IW-101 프로 와이어 소스/스피커 스위치, 화이트
- Push-Button Switch Operation
- Choose Either A Or B
- Functions As A Source Selector Or A Speaker Pair Selector
- decorator-Style
- White
User questions & answers
| Question: | Can I use it to switch between two sets of speakers instead? What's the wattage handling |
| Answer: | No this is a single source set up. Volume can be different in each zone |
| Question: | Is it a "Break before make" type of switch? Trying to make sure that when I connect a pair of speakers to two amps, only one will be active |
| Answer: | The "in" side of the switch has two channels - a left and a right. There are two red and two black rocker switches on one side of the switch and four red and four black rocker switches on the other side of the switch - so 2 x left and 2 x right channels. If you are saying the amp only has one red and one black, then that is a single channel amplifier and is only powering one speaker. You could make that become two speakers, but they would not be stereo. |
| Question: | How many speakers will this work with, I need 5 on A and 5 on B |
| Answer: | I recommend 16 gauge stranded. |
| Question: | Will this work with a 70V, 1100W amplifier system |
| Answer: | This is a simple switch. Electricity can flow in both directions. Just don't have both switches on at the same time EVER. |
Niles SS-4 Speaker Selector
Niles
Product description
Niles SS-4 speaker selector
- Niles SS-4 speaker selector
- Separate left and right ground paths for compatibility with all amplifiers, including Bridged designs
- Removable Screwless connectors accommodate up to 14-gauge wire. Rugged all metal chassis construction.
- Non-skid feet won't scratch furniture and ensure unit stability during operation 72 adhesive-backed room identification labels requires an amplifier that is compatible with a 4 Ohm load
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | My amplifier is capable of one pair of 4 ohms load. Can I use this to connect 2 pairs of speakers, each pair are 4 ohms load |
| Answer: | No |
| Question: | watts per channel handling.—Does this mean the input can only be 100 watts or that her output can be 100 watts per channel from 400 watt source |
| Answer: | It means that the maximum input can be 100 watts per channel. Now if you have a 400 watt amplifier, it can still work as long as you don't crank it up past 100 watts output. |
| Question: | I have a receiver Denon E400 that has 175W per channel, worked well with these speaker selector |
| Answer: | What matters is the impedance. Most Amps are 8 ohm as are speakers. When you hook multiple speakers in parallel the impedance goes down. The selector ensures that the impedance is at least 4 ohms even when as many as eight speakers are hooked in parallel (and would otherwise present 1 ohm of impedance). On my Yamaha receiver there is a switch that allows for a 4 ohm load and that is the key. You can probably run a 4 ohm load from an 8 ohm driver, it just means that more energy is dissipated in the amp than in the speakers but hopefully not so much as to do damage |
| Question: | Can I control volumes on two different speakers independently with this device |
| Answer: | No, there's no volumes controller on this device. You need a controller like ''Niles VCS100R White FG00956 100 Watt InWall Volume Control " (http://www.amazon.com/Niles-VCS100R-White-FG00956-Control/dp/B0001W1I58/ref=pd_sim_e_3) for each pair of speakers. |
Latest Reviews
View all
Wart Removers
- Updated: 20.06.2023
- Read reviews
Double High Air Mattress
- Updated: 04.01.2023
- Read reviews
Art Recording Headphones
- Updated: 14.06.2023
- Read reviews
Stands For Surround Sounds
- Updated: 17.03.2023
- Read reviews
Kids Fish Oils
- Updated: 05.04.2023
- Read reviews