9 best interconnect cable with machined
An interconnect cable with machined connectors is a type of cable designed for transmitting audio or video signals between electronic devices. The term "machined connectors" typically refers to connectors that are precision-machined for a high level of accuracy and reliability. These connectors are often made from materials like metal and are crafted with precision engineering to ensure a secure and stable connection.
In the context of connectors, adapters, and audio-video accessories, interconnect cables play a crucial role in establishing a reliable link between different components of an electronic system. Whether it's connecting audio components like amplifiers and speakers, or video devices like DVD players and televisions, high-quality interconnect cables contribute to the overall performance of the system.
Key features of interconnect cables with machined connectors may include:
High-Quality Materials: These cables are often constructed using high-quality materials to ensure durability and signal integrity. The machined connectors, being precision-crafted, provide a snug and secure fit.
Shielding: Many interconnect cables come with shielding to protect the signal from interference and maintain signal quality. This is particularly important in audio and video applications where signal clarity is crucial.
Connector Types: Interconnect cables come in various connector types, such as RCA, XLR, HDMI, etc., depending on the specific requirements of the devices being connected. Machined connectors ensure a precise fit, minimizing signal loss.
Length and Gauge: The length and gauge (thickness) of the cable can impact signal quality.Choosing the right length and gauge is important to prevent signal degradation over longer distances.
Gold-Plating: Some connectors may have gold-plated contacts, which can enhance conductivity and reduce the risk of corrosion.
Flexibility: The cable should be flexible enough to accommodate different setups without causing strain on the connectors or the cable itself.
When selecting interconnect cables with machined connectors, it's essential to consider the specific requirements of your audio or video system. The quality of these cables can have a noticeable impact on the overall performance and fidelity of your electronic setup.
Below you can find our editor's choice of the best interconnect cable with machined on the market
JL Audio XB-BLUAIC2-25 2-Channel Twisted-Pair Audio Interconnect Cable with Machined Connectors, 25-Feet
Product description
25 ft. (7.62 meters) 2-Channel Twisted Pair of Premium Blue Audio RCA Interconnect Cables with Machined Connectors
- 25 ft. (7.62 meters) 2-Channel Twisted Pair of Premium Blue Audio RCA Interconnect Cables with Machined Connectors
- Silver-plated, oxygen-free copper conductors for maximum noise rejection
- Screw down points engineered into the channel splitters and onto a sliding clamp for a clean installation
- Overmolded strain relief system allows for cable exit flexibility and protects the silver-soldered connections
- Machined brass connectors are compact for an easy install
Skar Audio 17-Foot 6-Channel Twisted Pair RCA Interconnect Cable - SKAR6CH-RCA17
Product description
The Skar Audio SKAR6CH-RCA17 is an audiophile grade 17 ft. 6-channel RCA interconnect cable. Featuring twisted pair technology these premium RCA's deliver maximum signal transfer for the best possible sound in your system. Audiophile grade - featuring twisted pair technology and multi-stranded premium wire construction. Furthermore these RCA's also utilize locking split-tip connectors allowing for better signal transfer and feature precision machined color coded metal ends (red & white band identifiers). the rca's are finished in a matte Blue max-flex jacket that allows for ultimate flexibility allowing them to be used in a variety of applications with a hassle free installation.
- 17 Ft 6-Channel Audiophile Grade RCA Interconnect Cable
- Utilizing 99.99% Oxygen Free Multi-Strand Copper Wire Construction
- Featuring Twisted Pair Technology For Maximum Signal Transfer
- Precision Machined Color Coded Metal Ends (Red & White Band Identifiers)
- Matte Blue Finish with Max Flex Jacket for Ultimate Wire Flexibility
User questions & answers
| Question: | What is the length of the cable from where they split until the RCA terminal |
| Answer: | It's about 6" |
| Question: | I only need 2 of the channels now for a subwoofer install. Will the other 2 unused channels cause interference/noise |
| Answer: | I purchased a 17' two channel cable. It has substantial shielding and it should isolate external noise on unused lines. Or, send it back for a two channel cable. |
| Question: | Will this be long enough for a 02 tahoe running old Rockford 6channel |
| Answer: | Should be plenty long enough. |
| Question: | Are these RCA’s for home or car use |
| Answer: | U can use for both but mostly for car |
Elite Audio PRO 100% OFC Copper 4 Channel 15 ft RCA Audio Interconnect Stereo Cable with Triple-Shielded Armor, Quad Clamp Brass Copper Connectors & Copper Lead Drain Wire for Best Noise Cancellation
Elite Audio
Product description
Elite Audio PRO 100% OFC Copper 4 Channel 15 Ft RCA Audio Interconnect Stereo Cable with Triple-Shielded Armor Quad Clamp Brass Copper Connectors & Copper Lead Drain Wire for Best Noise Cancelation
- PROFESSIONAL FOUR-CHANNEL RCA AUDIO CABLE: Professional audio quality RCA cable for premium left/right audio signal transfer from your car amplifier to your audio receiver. 4X MALE TO 4X MALE AUDIO CABLE Dual male cable connectors allow you to use the RCA audio cable with any standard stereo left/right output, providing crystal clear stereo sound for your car amplifier stereo system
- OXYGEN FREE COPPER CORE AUDIO CABLE: Our oxygen free copper core prevents EMI & RFI signal interference ensuring the highest quality audio transfer, without static or popping
- COPPER LEAD DRAIN WIRE: Drain wires are used in cables in conjunction with a metallic shield to ensure effective grounding. The drain wire serves to complete an electrical circuit from the shield and carry unwanted electrical noise to ground away from the circuit providing superior noise reduction
- MACHINED BRASS QUAD CLAMP COPPER CONNECTORS: RCA cables feature professional quality machined brass copper quad clamp connectors with rotational locking clamps which protect the cables from corrosion and ensures a premium connection for the best possible audio transfer
- TRIPLE SHIELDED BODY ARMOR: Our Armor Protection utilizes high strength nylon fibers which are then woven tightly around the ultra-flexible PVC cable jacket. Ensuring cable integrity when contending with sharp metal, vibration and moisture
1 Foot – Directional Quad High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2534 Wire and Amphenol ACPR Die-Cast, Gold Plated RCA Connectors
MOGAMI, AMPHENOL
Product description
This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2534 wire and Amphenol ACPR - Die-Cast Body, Gold Plated RCA Connectors (White and Red color boots). We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you. IMPORTANT: The Star-Quad design of the 2534 cable together with our Directional Topography reduces EMI noises to a point of non-existence (please refer to the images for further technical details). - We are certain that you will be extremely happy with this product right out of the box, but for optimal performance we recommend 175 hours of Burn-in Time. This burn-in does not have to be a continuous process. You may pause burn-in and continue when possible. (If you are not pleased with the cable after the 175 hour Burn-in Time, you have passed the Amazon Return window, Amazon refuses to accept the return; Please send us a message via Amazon’s “Ask a Question” from the Seller, button and we will accept the return and pay for the Return Postage as well)
- This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2534 wire and Amphenol ACPR Gold RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.
- The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D.
- The brand of connector we used for this custom cable assembly: Amphenol ACPR RCA/Phono plugs with smooth Satin body are high-end, professional-grade RCA connectors. Gold plated Brass contacts enhance conductivity. Insulation prevents any shorting inside. Colored rubber flexible grommet grants best strain relief.
- All our custom made cables are professionally soldered with a Proprietary 4% Silver solder blend; especially developed by WORLDS BEST CABLES, we also use a specially developed, Proprietary Nitrogen-Assisted soldering process that is unique to us, which exceeds the highest industry standards, the overall integrity of the solder joints are greatly improved in comparison to traditional soldering processes.
- These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all the major cable and connector brands. We have served millions of customers with quality assemblies for many years - This sale is for a pair of ‘directional’ cables, each cable is 1 feet long (2 cables for left and right channels).
User questions & answers
| Question: | what will happen if you connect the wrong end (not the correct direction |
| Answer: | Hi, no harm will come to the cable nor the equipment. You will even hear the audio. The problem will be, connecting it the other way will take away the noise rejection boost that the cable will get from the directional design :) Other than that, do not worry, even if someone accidentally plugs it the wrong way, the cable and the equipment will be alright. Please let us know if you have further questions. Warm regards, WBC |
| Question: | If I’m using a Schiit stack, what direction should the wires go |
| Answer: | The tag at the one end of the cable says "source" and then points down. I interpret that to mean that the source plugs in on the end with the tag and flows towards whatever you are plugging the source into. In your case the source is the DAC which means that the tags go on the DAC side. I highly suspect that the direction makes no difference and they are just trying to get you to always use the cables in the same direction. The flow of electrons should always go one way, the cable gets magnetised a certain way or some other load of audio woo. |
| Question: | Anyone can say if its better going with mogami 2549 vs 2534 for rcas |
| Answer: | 2534 should be better at noise rejection if you have a lot concern in that area. Otherwise the 2549 should be the best for fidelity due to lower capacitance (This is according to Mogami). In shorter lengths I'd just get 2549. If you're doing a particularly long run, the 2534 may be best as theres more opportunity for EMI/RFI to be picked up along the length. That said the general rule for analog cables is the shorter the better, and that is what will cause the biggest change in fidelity over the type of wire, so in addition to the above, get the shortest length available that reaches your equipment. |
| Question: | Are these cables flexible enough to connect two Schiit components stacked vertically without any lifting or other positioning problems |
| Answer: | They are quite flexible. I often disconnect/reconnect them so I can use another longer RCA cable I have hooked up to my speakers when I want to use those instead of headphones. I never had an issue with their flexibility. They seem quite durable, and deliver quality signal to my headphone amp. My DAC and Amp (Aune X1s, Massdrop THX AAA) are stacked as well, however those are heavy units, and a cable will definitely not make them lift in almost any case. If you're using a modi/magni, for instance, the metal part of the connectors on these cables extend pretty far back, and do have some weight to them. Flexibility wouldn't be a concern 100%. It could definitely hook up to both with ease, but there may be a chance of lift, as these are pretty hefty cables (which is a plus for me). You could probably offset it a bit by putting the amp on top so the additional weight of the headphone cable in the front would help balance it out a bit. If you have some of their larger units, this would definitely not be a concern at all. |
AudioQuest Tower 1.5m RCA Analog Audio Interconnect Cable
AudioQuest
Product description
1.5m (5 ft.) of Analog Audio Interconnect Cable from AudioQuest will give you the distortion–free sound you're looking for. With RCA connectors, the Tower Audio Cable virtually eliminates strand–interaction distortion with solid Long–Grain Copper conductors and air–filled Foamed–Polyethylene Insulation to eliminate energy absorption (loss). AudioQuest's Noise–Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane, and Asymmetrical Double–Balanced Geometry offers relatively low impedance on the ground for a rich, dynamic experience.
- Solid Long–Grain Copper (LGC) Conductors - Solid conductors eliminate strand-interaction distortion. Evergreen's solid Long–Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen–Free High–Conductivity) copper.
- Foamed–Polyethylene Insulation - Tower uses air–filled Foamed–Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low–loss and has a benign distortion profile.
- Metal–Layer Noise–Dissipation System (NDS) - 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise–Dissipation System. Noise–Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane.
- Asymmetrical Double–Balanced Geometry - While many single–ended cable designs use a single path for both the ground and the shield, Double–Balanced designs separate the two for cleaner, quieter performance.
- Cold–Welded Gold–Plated RCA Plugs - This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.
User questions & answers
| Question: | How does this cable perform as far as reducing "Hum" when connecting high powered amps to receiver pre-amp outs |
| Answer: | Hello, these safety glasses can be used to make prescription glasses |
| Question: | Is this two Left & Right cables joined together or just one cable |
| Answer: | Hello dear customer Our protective glasses can not only turn black in the sun, prevent the glasses from fogging, but also block 40% of blue light, reducing eye fatigue on the screen You will like him sincere wishes |
Pangea Audio Premier SE Interconnect Cable RCA to RCA - 0.6 Meter Pair
Pangea Audio
- The Finest Copper Available - Premier uses conductors made with Cardas Grade One Copper, which experts in the industry consider to be the finest copper available for AV cables.
- Superior Insulation – Insulating the Cardas Copper conductors are PE air tubes, which, until very recently, were previously found only on extremely high-end audio cables.
- Triple Shielding Rejects Noise – To reject noise and interference from inside the cable and from the room, each conductor has its own shield and then the entire cable is encased in separate foil and braided shields.
- Prime 750 RCA Termination – The no-compromise Prime 750 RCA features a special ultra-low mass design that takes best advantage of the fine properties of exotic metals, while avoiding technical problems like eddy currents that are caused by using higher mass metal contacts.
- Non-magnetic Brass RCA Barrel –The outer shell or cover of the RCA is made from machined, non-magnetic brass treated with a tough-as-nails scratch-and-chip-resistant black chrome plating.
Product features
Pangea Audio Premier Audio Premier SE Interconnect
Pangea's Premier SE interconnect takes full advantage of the latest materials in a highly evolved cable design. Premier SE provides a nice step up in quality from the already excellent standard Premier interconnect.
If your audio interconnects are more than five years old, you owe it to yourself to try a pair of Pangea Audio Premier SE Signature Edition interconnect cables, designed by legendary cable expert Jay Victor. In recent years, the technology of cable design and construction has advanced by leaps and bounds.
New materials have made it possible to construct cables with less noise interference from outside sources – like Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) – as well as interference from the other audio channels, and it's possible to do this economically.
Key Performance Features
- All audio conductors are made from premium 100% Cardas Grade One Copper
- Premium PE air tube insulation
- Triple-layer shielding from EMI and RFI noise (a silver-plated copper braided shield, an aluminum/mylar foil shield, and a carbon-filled PE shield)
- Advanced thermoplastic rubber jacket is tough, yet very flexible
- Prime 750 RCA Termination (ultra low mass gold-plated beryllium copper spring-type ground contacts, ultra-low-mass hollow direct gold-plated tellurium copper center pin, and an advanced polymer insulator)
- Non-magnetic RCA brass cover is treated with a tough-as-nails scratch-and-chip-resistant black chrome plating
- Premium hand-soldered connection
Pangea Audio - An American Company with US-Based Product Support
Premium PE Air Tube Insulation
2 Units - 1 Foot - Canare L-4E6S, Star Quad Balanced Male to Female Microphone Cables with Amphenol AX3M & AX3F Silver XLR Connectors - Custom Made by WORLDS BEST CABLES
CANARE, AMPHENOL
Product description
2 Units - Custom Made - 1 Foot Canare L-4E6S, Star Quad, Shielded (Braided shield & Polyethylene Insulation) Balanced Microphone Cables terminated with Amphenol AX3M Silver XLR Male Connectors and Amphenol AX3F Silver XLR Female Connectors (this sale is for 2 cables, each cable is 1 Foot long).
- Canare L-4E6S by Canare Electric Co., LTD-Japan is a premier (21 AWG) ultra-durable Star Quad audio cable for high-end audio applications. 40 separate strands in each conductor results in improved strength & flexibility even in extreme cold weather. The Star-Quad design reduces almost all EMI noise. Superior sonic performance for professional audio users as well as discerning Audiophiles who cherish sound quality as well as durability that Canare is well known for all over the world.
- Canare manufactures the best in Pro Audio and Video Cable, Connectors and Tools required for Audio/Video applications. Founded in year 1970, in Nagoya Japan they have been fulfilling the needs of professionals for over 4 decades. Professional broadcast engineers, sound technicians, A/V facility integrators, design consultants, audiophiles and many leading OEM's rely on Canare's product, proven reliability. Optimize with Canare ...the Professionals Choice!
- AX3M & AX3F are high end XLR offerings by Amphenol, the AX (Professional) series has great reliability, improved contact integrity & reduced cable strain. The connectors come in a Satin Nickel finished Zinc diecast Shell and has Silver-plated Machined contacts for superior performance (as opposed to stamped contacts on cheap connectors proliferating the market).
- All our custom made cables are professionally soldered with a Proprietary 4% Silver solder blend; especially developed by WORLDS BEST CABLES, we also use a specially developed, Proprietary Nitrogen-Assisted soldering process that is unique to us, which exceeds the highest industry standards, the overall integrity of the solder joints are greatly improved in comparison to traditional soldering processes.
- This sale is for 2 individual cables, each cable is 1 Foot long.
User questions & answers
| Question: | Appropriate cable to connect balanced dac to amp? does the mic designation mean anything |
| Answer: | It's not designed with a shoulder rest in mind, but I keep mine on anyway. What happens is that the shoulder rest, not the violin, ends up sitting on the supports. |
| Question: | foot lenght is from tip to tip |
| Answer: | I don't think so. It works great on my soprano, but my concert barely fits. |
BELVA BBIC5 Professional Grade 5m (16.4 Ft) 2-Channel RCA Audio Interconnect Cable (CCA)
BELVA
Product description
Audio Interconnect Cable (CCA) 2-Channel RCA, perfect for stacking, strapping or connecting amps Helical Twist construction minimizes noise and interference Patented high tolerance compact machined metal end Packed in resealable bag Length: 5m (16.4 feet) Also available in 9.8 Ft.
- Audio Interconnect Cable (CCA)
- 2-Channel RCA, perfect for stacking, strapping or connecting amps
- Helical Twist construction minimizes noise and interference
- Patented high tolerance compact machined metal end
- Packed in resealable bag
Belva BBIC3 Professional Grade 9.8ft. 2-Channel RCA Audio Interconnect Cables
Product description
Audio Interconnect Cable (CCA) 2-Channel RCA, perfect for stacking, strapping or connecting amps. Helical Twist construction minimizes noise and interference. Patented high tolerance compact machined metal end. Packed in resealable bag Length: 3m (9.8 feet).
- Audio Interconnect Cable (CCA)
- 2-Channel RCA, perfect for stacking, strapping or connecting amps
- Helical Twist construction minimizes noise and interference
- Patented high tolerance compact machined metal end
- Length: 3m (9.8 feet)
Latest Reviews
View all
Oils For Faces
- Updated: 25.02.2023
- Read reviews
Battery Operated Lights
- Updated: 28.06.2023
- Read reviews
Remote Electrical Switches
- Updated: 15.06.2023
- Read reviews
Kettle Bbq Chips
- Updated: 17.06.2023
- Read reviews
Canned Air For Keyboards
- Updated: 16.01.2023
- Read reviews