13 best tram cb radios
Tram CB radios typically refer to CB (Citizens Band) radio antennas and related accessories offered by the brand Tram. CB radios are used for short-distance radio communication and are commonly used by truckers, off-roaders, and other enthusiasts who need reliable communication on the road or in remote areas. Tram is known for producing various CB radio products, including antennas and related accessories. Here's what you should know about Tram CB radios and their accessories:
Antennas: Tram offers a range of CB radio antennas designed for different purposes. These antennas vary in terms of size, shape, and specifications. The choice of antenna depends on factors like the vehicle type and intended use. Common types of CB antennas include whip antennas, fiberglass antennas, and magnetic mount antennas.
Whip Antennas: Whip antennas are typically tall, flexible antennas that can be mounted to the vehicle's body or roof. They provide good performance and are suitable for larger vehicles.
Fiberglass Antennas: Fiberglass antennas are durable and lightweight.They are often used for off-road vehicles and trucks, as they can withstand rugged conditions.
Magnetic Mount Antennas: Magnetic mount antennas come with a strong magnet on their base, allowing them to be easily attached to the roof of a vehicle without drilling holes. They are a popular choice for temporary installations.
Base-Loaded vs. Top-Loaded: Tram offers both base-loaded and top-loaded CB antennas. Base-loaded antennas have the coil at the base, while top-loaded antennas have it at the top. The choice between them can affect the antenna's performance and aesthetics.
Accessories: Tram also provides various CB radio accessories, such as coaxial cables, connectors, mounts, and replacement parts. These accessories are essential for setting up and maintaining a CB radio system.
Tuning: Properly tuning a CB antenna is crucial for optimal performance. Tram provides guidelines and tools for tuning their antennas to the correct frequency, ensuring clear communication.
Installation: Installing a CB radio antenna requires some technical knowledge, including selecting the right location and ensuring proper grounding. Tram typically includes installation instructions with their products.
Legal Considerations: It's important to be aware of the legal regulations regarding CB radio usage in your region. CB radios operate on specific frequencies and power levels, and exceeding these limits can result in legal penalties.
Range: The range of a CB radio system is influenced by various factors, including antenna height and terrain. Tram offers antennas with different specifications to help users achieve their desired communication range.
In summary, Tram CB radios refer to a range of CB radio antennas and accessories produced by the Tram brand. These products are designed to facilitate reliable short-distance radio communication for various applications, including trucking, off-roading, and outdoor adventures. Proper selection, installation, and maintenance of Tram CB radio products are essential for ensuring clear and effective communication on the CB radio band.
Below you can find our editor's choice of the best tram cb radios on the market
Tram Cat Twin Coil CB Antenna (TCT-9)
Tram
Product description
Amplify your signal with tram. This high-performance aluminum antenna is preferred by truck drivers and handles up to 37,000 watts.
- Antenna of choice for professional truck drivers
- 9 inch shaft
- 2 1/2 inch wide coil
- 37,000W power handling
- High-performance aluminum
User questions & answers
| Question: | Is the whole thing 9 inches |
| Answer: | 9 in shaft Over 40" overall length |
| Question: | question how far can you get out with this and and i use a stander L mount for it |
| Answer: | I can reach out pretty for. I have no complaint against it |
| Question: | Anyone run this at the rated 37,000 watts? Just asking |
| Answer: | Yes |
| Question: | How long are these |
| Answer: | I would have to measure but I believe about 5ft so |
Tram 1650-HC CB Radio Marine Antenna, Samsung
Tram
Product description
The CB Radio MARINE Antenna features a 17-ft RG-58 cable with PL-259 connector installed.
- 3ft top-load fiberglass whip
- Lift & lay over nylon mount
- No-ground plane
- Leveling plate
- 17ft RG58 cable with PL-259 connector installed
User questions & answers
| Question: | Will this still work mounted sideways |
| Answer: | Yes, it should work fine. |
| Question: | Will this work on a motorhome |
| Answer: | Yes works great but watch for height,they are not flexible,i broke 2 of them |
| Question: | Can I collapse the antenna down when I’m storing my boat |
| Answer: | yes pull up and store. |
| Question: | Is there a trick to get the antenna to extend up? It came out of box flat and can't get it to move in another postition |
| Answer: | This antenna comes with nylon lift and lay mount with leveling plate. |
Tram-Browning Inc. CB HAM Low Band Antenna NMO Trunk Mount for Mobile Radio PL259 Cobra Uniden
Tram-Browning
Product description
CB HAM Low band mobile antenna: 1/4 wave, 26.5-30 MHz, Unity gain, 49" whip, DC ground, shut fed base load, gold plated plunger type contact pin, p/n BR-140, and Fully Enclosed NMO Trunk Antenna Mount with 17' Coax Cable, PL259 type assembled connector, for Low band and CB Mobile Radios, 1246.
- 1/4 wave, 26.5-30 MHz, Unity gain, 49" whip, DC ground, shut fed base load, gold plated plunger type contact pin
- NMO Trunk Antenna Mount with 17' Coax Cable, PL259 type assembled connector
User questions & answers
| Question: | Will this cover 45-47mhz on a kenwood 690H mobile radio |
| Answer: | No. You will need Tram 1143 antenna. It is designed to work on 40-50 MHz. ASIN B00S982AT4. |
Tram 1498 18ft CB Base Station Antenna, 26MHz–31MHz
Tram-browning
Product description
Tram is one of the most trusted names in the radio antenna marketplace. The 18ft CB Base Station Antenna, 26MHz–31MHz continues that legacy. Its premium components add to the functionality and durability of the antenna to deliver the communication you depend on.
- 3 section
- 18ft tall
- 1/2 wave over 1/4 wave
- 2,000W
- Omnidirectional
User questions & answers
| Question: | What is the wind load for this antenna |
| Answer: | Don’t think u had the top whip in the correct spot. I just put one up. I have a 1.1 on my swr |
| Question: | Does this have adjustment for swr |
| Answer: | yes u tune to the frequency that u are after like 27.500 it has 2 small tuning rings at the bottom who ever said u have to cut it , there stupid do not listen to them i have this exact model it was easy to set up and tune |
| Question: | What diameter pole does it take to mount on |
| Answer: | 1-/12” Diameter pole |
| Question: | What is the dbi on the wsp |
| Answer: | I looked at another 1/2 wave vertical and it had 2.15 dBi gain. I really doubt that this one would be much different. The 8000 dBi answer is someone's idea of a joke. |
Tram CB Base Antenna
Tram
Product description
Choose tram for your next antenna installation Project with this CB base antenna! this 3 ft. Antenna is omnidirectional. Stay connected with tram.
- Uhf female so-239 Connector
- 500W 3ft tall
- Omnidirectional
User questions & answers
| Question: | do these have a swr adjustment on them |
| Answer: | SWR can be adjusted using an external antenna matcher or changing the coax length- |
| Question: | is there a recommended coax length for this antenna and what power can it handle |
| Answer: | Coax is any length.CB can only be 4 watts how ever i checked this antenna with SWR meter it was right on.I think for a little antenna it power could be the best you can give it. |
| Question: | I'm a ham operator, and need a stealth antenna. has anyone actually used this on 10 meters instead of cb? if so, did you need a antenna tuner |
| Answer: | There's a video about this antenna under a different name. The product is sold under various brands but seems to be the same antenna. Enter "antenna b100 erod1944" in the YouTube Search Engine. I used it on 10 Meter JT-65 with a good SWR. A SWR test on 10 meters starts at about 7:30 on the video. |
| Question: | what is the length of this antenna |
| Answer: | Overall length is 37". |
Tram Tram 3500 CB Antenna 5-Inch Magnet Kit with RG8X Coax and Rubber Boot
tram-browning
Product description
Get more bang for your buck with this CB Antenna 5 In. Magnet Kit with RG8X Coax and Rubber Boot from Tram. It comes with a heavy-duty 5 in. magnet with rubber boot and an 18 ft. heavy-duty RG8X premium coaxial cable. The stainless steel whip antenna is about 57-3/32 in. tall.
- 57-3/32 in. stainless steel tapered .118 (3 mm) whip
- Weather channel capability
- Ideal for both receiving and transmitting signals
- Pretuned for all CB frequencies
- Frequency range: 26 MHz to 30 MHz
User questions & answers
| Question: | Weather-Channel Capability for Tram 3500 Heavy-Duty Magnet-Mount CB Antenna Kit |
| Answer: | Yes weather channel capable! In my wife's SUV we have cobra 29 WX-ST and when in weather mode on the cobra our reception on NOAA broadcasts are 3-5 counties away with the Tram 3500 . |
| Question: | Can you shorten the whip |
| Answer: | Antenna for cb is SWR optimized 2" exactly into the base. Must loosen and then tighten BOTH set screws. |
| Question: | What is the antenna length |
| Answer: | 5' |
| Question: | Will this be plug in and ready I have a CB and no antenna this comes with the magnetic mount, the whip for the mag mount and the coax correct |
| Answer: | Yes it does. All you have to do is mount the antenna where you want it. Then run coax cable and plug in. Then you're setup and ready to go. |
Tram 3700 Trucker CB Antenna, Standard Packaging
Tram
Product description
Transmit and receive signals farther than with any other center loaded mirror mount antenna! The Tram 3700 Trucker CB Antenna offers 3,700 watts power handling with a 6 in. stainless steel tapered whip, center loaded heavy-duty coil and thermoplastic round coil holder for extremely low noise reduction.
- Center Loaded Heavy-Duty Coil
- 3,700w Power Handling
- Thermoplastic Round Coil Holder For Extremely Low Noise Reduction
- Transmits & Receives Farther Than Any Other Center Loaded Mirror Mount Antenna
- Connector type: HDMI to DVI
User questions & answers
| Question: | Intructions say to insert whip until it stops. It only goes about 1/2 inch. Is that normal |
| Answer: | With Allen set screw loose it should go in about 1 1/2" to bottom out |
| Question: | Will this screw into the antenna base located on the hood of my f150 Ford? If so, will it interfere with my stereo (radio) transmission |
| Answer: | If you are talking about your stereo antenna the answer is no it is a much thicker diameter and this is for a c b radio not a stereo. |
| Question: | is this just a "screw and play" system |
| Answer: | The tram 3700 is tune from the factory to cover legal channels. I have 1.2 to 1 SWR from channel 1 to channel 40 |
| Question: | what is the total lengthof this antenae |
| Answer: | 52 " from bracket holding it to the tip |
Tram 269 Triple 5" Magnet CB Antenna Mount
Tram
Product description
This Tram Triple 5" Magnet CB Antenna Mount is sturdy and attractive with a black kote steel magnet housing. It comes with a 17-ft RG-58A/U coaxial cable, UHF male PL-259 and standard 0.375" x 24 thread CB mounting.
- Black Kote Steel Magnet Housing
- 17-ft Rg-58a/u Coaxial Cable
- Uhf Male Pl-259 Installed
- Standard 0.375" X 24 Thread Cb Mounting
User questions & answers
| Question: | Will this hold a 102 whip |
| Answer: | It holds my 102" wipe with the monster spring |
| Question: | Can this mag mount hold yaesu atas 120a |
| Answer: | I seriously doubt that ATAS-120A would work with this mount. First, the connector here is a CB mount connector and not UHF connector. Second, ATAS 120A requires direct connection to the body of the vehicle since the antenna is tuned by DC current and not AC. Unlike RF, DC cannot pass through the rubber and roof paint. |
| Question: | What ham radio antennas will work with the this? I'm looking for 2m/70cm. Thanks |
| Answer: | For a 2m/70cm antenna, you do not need this beefy of a mount. A 1/4 wavelength antenna is about 19 inches high. I use a Diamond MR77 mag mount that works great. If you were to use a 5/8 wavelength 2m antenna, something like a 5" mag mount would be good. This is more suited to a 7 1/2 foot HF type fiberglass whip or "maybe" one of the CB whips. I have one as a backup and like it. As of this writing, my primary HF antenna is a series of MFJ Hamtennas and a Diamond K-400 mount. Just make sure with this mount that you minimize capacitive reactance as good as possible if running HF or with an amp. I would put two mix 31 toroids in-line with about 6 turns each to make sure there is no RF on the coax if you use it for HF. For a 2m/70cm antenna, don't worry about any chokes. And also, for 2m/70cm, you do not need anywhere near the ground plane that HF requires. |
| Question: | Does this mag mount come with rubber covers on the magnets to protect the paintwork on the car roof |
| Answer: | Rubber covers would increase capacitive reactance...defeating any ground plane your car could offer as the other half of the antenna. The mount needs to make contact with the metal in order for the vehicle to serve as the other half of the antenna. While I'm sure it would have some effectiveness being close to the metal, it will not establish a ground properly. It does have a Mylar film on the bottom of the magnets, but moisture and scratches will get under any mag mount. Over time, any mag mount will rust around the edges where the Mylar film meets it. Some the contaminants are regular grit and grime, while some is brake dust and other components. I have this as a backup mount for vacations in other cars, etc. It would be possible to use it as a base antenna mount if 1/4 wavelength radials were fun out from the base. I use a Diamond K-400 mount as my primary mount. The mount is only part of the equation. It requires a decent antenna. My own antennas are an inexpensive answer. I use MFJ Hamtennas (fiberglass whips) for each HF band I use. They are about 7 1/2 feet high, but with a quick disconnect, it is closer to 8 feet high, plus the height of what they are mounted on. I would like a Scorpion screwdriver antenna if I had a spare $900 laying around... Any mag mount is only so strong. If mounted on the roof, I would recommend a cable to your rack in case you have a frontal collision. The mount would turn into a missile. That super grip is on thick metal in the ham radio or CB store. While it seems like a strong mount when you are trying to pull it loose from the roof of a car, it is in fact not nearly as strong. |
TRAM 4-W-HC Fiberglass CB Antenna (White, 4 feet)
Tram
Product description
This tram 1,500W CB antenna has a heavy-duty fiberglass construction and a frequency range of 26-29 MHz and covers the complete CB band. It has a 3/8 inch x 24 thread mounting.
- Heavy-duty fiberglass construction
- Freq: 26-29 MHz
- Covers complete CB band
- 1,500W
- 3/8-Inch x 24 thread mounting
User questions & answers
| Question: | Is this antenna for a vehicle or a structure |
| Answer: | This is for vehicles. |
TRAM NH-4-HC Heavy-Duty Steel 4 feet CB Antenna
Tram
Product description
This tram 4-ft heavy-duty steel CB antenna is for industrial and large truck use. A bottom-loading coil with a stainless steel whip, it has a 400W power rating and a 26-28 MHz frequency range. This antenna has a 3/8 inch x 24 thread mounting.
- Large truck & industrial use
- 400W power Rating
- Frequency range: 26mhz-28mhz
- Bottom-loading coil with stainless steel whip
- 3/8 inch -24 thread mounting
User questions & answers
| Question: | can this be used with a magnet base |
| Answer: | Hello Jody. Yes, of course you can if your magnetic mount is 3/8"x1/4" female threaded which, most mag-base-mounts are. If you are using this for just a 40 Channel C.B. Jody, why don't you spent a few more dollars and buy yourself a "Mini WiL" ( Wilson) Magnetic mount Antenna. That ma'dear...will talk a long~long~way with a slight SWR adjustment and receive awesomely also. Just a thought Hun! But-yes...this one will fit a magnet base Jody. Bye, Michael. |
| Question: | What size Allen wrench to tighten whip |
| Answer: | The antenna is suppose to have the right size allen wrench in the bag. My allen wrench is not marked, but I did measure it with digital calipers, and it averaged out to be 2.5 mm. I don't know how Michael is using a torx to remove a hex screw. Maybe a T10 does work...who knows. |
| Question: | Does this antenna have to be wired to vehicle? Or can it work without |
| Answer: | It needs to be grounded if not mounted on a vehicle. |
| Question: | is this antenna tuneable |
| Answer: | It can be tuned by trimming the length of the antenna |
TRAM 3-B-HC Fiberglass CB Antenna (Black, 3 feet)
Tram
Product description
This tram 1,500W CB antenna has a heavy-duty fiberglass construction and a frequency range of 26-29 MHz and covers the complete CB band. It has a 3/8 inch x 24 thread mounting.
- Heavy-duty fiberglass construction
- Freq: 26-29 MHz
- Covers complete CB band
- 1,500W
- 3/8-Inch x 24 thread mounting
User questions & answers
| Question: | Does this come with one or two antennas |
| Answer: | No, it only has one antenna |
| Question: | Does this antenna need to be grounded |
| Answer: | All antennas should be grounded. |
| Question: | Does this come with the stud mount |
| Answer: | No it doesn’t |
| Question: | I have a tram magnet antenna. Could I replace that antenna with this one. Both are screw ins |
| Answer: | No. The dimension of the screw is much larger than that of the magnet mount. Plus the size/resistance of the fiber glass antenna to the wind would make your magnet unstable. I do recommend the fiberglass over the one you currently have however. A couple of drill holes and a 90° adjustable connector will keep the antenna low profile when not in use. Google images of "fold over amatuer radio antenna adapter" to see what I'm talking about. Good luck. |
TRAM 3500 CB Antenna Kit Heavy-Duty 5 Magnet-Mount W/ 18 RG-8X Coaxial Cable Electronic Accessories
TRAM(R)
Product description
Tram(R) TRAM 3500 Heavy-Duty Magnet-Mount CB Antenna Kit
- NEW
- TRAM
- WARRANTY : ONE YEAR
- PET-PYLPHBT6R
User questions & answers
| Question: | cable length is |
| Answer: | The cable lengh is 18'. |
| Question: | How long is the whip |
| Answer: | The whip is 57'' and a fraction. |
Tram BR-79 Flat Coil Trucker CB Antenna
Tram
Product description
Check out this Tram Flat Coil Trucker CB Antenna! This is a premium antenna component that provides functionality and durability to deliver quality communication connections you depend on. This model has been carefully planned and developed to ensure great transmission over many uses.
- 68 in. tall
- 16 in. stainless steel shaft
- 2 in. diameter flat anodized aluminum coil
- 15,000 watt power handling
- Frequency range: 25 MHz to 30 MHz
User questions & answers
| Question: | Will it hold a 102” antenna |
| Answer: | yes |
| Question: | Can this hold a 5ft 10in antenna |
| Answer: | yes, it can hold a 5'10" antenna. It is a very sturdy and well designed base (even able to get a 100 mile wind with it installed. |
| Question: | Is it ok for a CB antenna |
| Answer: | Absolutely! As long as the antenna has a 3/8 thread as do most. |
| Question: | Can it hold a |
| Answer: | I guess that would depend on the quality of the mounting as a whole. I don't see why it would be an issue to use a 102" with or without a spring long as the NMO is firmly mounted. |
Latest Reviews
View all
Computers Gaming Desktops
- Updated: 01.04.2023
- Read reviews
Photo Recoveries
- Updated: 26.03.2023
- Read reviews
5 1 Surround Sound System For Tv
- Updated: 11.01.2023
- Read reviews
Face Cleansing Brush For Teens
- Updated: 10.03.2023
- Read reviews
Prana Headbands
- Updated: 04.07.2023
- Read reviews