9 best leather clips

Product description

Used on holsters and small cases. Attach with rivets. 2-5/8" x 1-1/2"

• Tandy Leather Rivet On Spring Clip Black 1237-24

User questions & answers

Question:	What is the width of the thinner part? i see the bigger side is 1.50" which is perfect
Answer:	Dimensions listed on Tandy website are 2-5/8" x 1-1/2". That seems right, but I don't have one here to measure.
Question:	Is there any good, thin backkplate available
Answer:	I used it for a tool belt
Question:	What's the width on this belt clip
Answer:	It is 1 1/2 inches wide.
Question:	is this item come with rivets
Answer:	No it does not, I did not use rivets any way I used open back screw post. They also come from Tandy and come in 1/8 or 1/4 inch lengths. they allow you to screw on and off if you want to use clip on a different item at will without having to drill anything and there only a little over $3. Hope it helps.

Product description

4 Pack Gun Metal Black 3/4" Clip & Dee 5/8" D-Ring Set of 4 Leather Craft Repair Clip & Dee 5/8" 3/4" Long Black. NEW Saddle-Tack replacement concho Clip and Dee.. 5/8" D Ring 3/4" Clip. Used for attaching Saddle Strings to your saddle. Also other projects that require a ring. heavy duty blackened nickel plated, one piece clip so it wont pull apart... Made In The USA

• Blackened nickle
• easy install
• pack of 4 pcs
• 5/8" D ring and 3/4" Clip, attach saddle strings
• attach saddle strings and other projects that require a ring.

User questions & answers

Question:	Can you tell me if a size 10 screw can be used with these
Answer:	Yes, but depending on the application I would look at a "pop rivet" especially if you are looking for a water proof attachment. If so make sure you specify waterproof pop rivets when ordering.
Question:	Will this work for use with a shoulder strap on a leather bag
Answer:	These are better for metal work
Question:	What is the hole diameter
Answer:	It's a #10 drill bit .193 inch.
Question:	Is the little strap attached to the d ring made of metal or is it a type of fabric
Answer:	The strip is metal.

Product description

7/8" x 3" (7.6 cm) Spring steel, black finish.

• Tandy Leather Spring Belt/Holster Clip Black 1240-24

User questions & answers

Question:	what is the diameter of the hole
Answer:	Hello, It is 3/8" in diameter.
Question:	When I increase quantity, shipping cost doubles. Can you combine shipping
Answer:	Hello, That's a great question. Shipping is $3.25 + $.45 per item. Thank you, Bruce
Question:	Is there just one hole
Answer:	Yes, just one: => If you need TWO attachment points at which to rivet it (as I did) you'll have to recruit a center punch, a hammer, and either a drill press or hand-held drill. => I strongly suggest the punch (especially if you do not have a drill press) because the small indentation made by one prevents your drill bit from "wandering" as you place a hole exactly where you need it. Hope this helped, Geek
Question:	it comes in pairs or just one belt clip
Answer:	It's just one belt clip.

Product description

7/8" x 3" (7.6 cm) Nickel-plated spring steel.

• Tandy Leather Belt/Holster Spring Clip 1240-00

User questions & answers

Question:	What are the dimensions of this clip? Total length, belt loop length, and width
Answer:	Width is 1 inch, maybe a tad bit under.. total length is about 3 inches (sorry it's not more precise, already have it sewn into something!), and the belt loop length is 1 3/4th inches. It is a great quality item, it has held up exceptionally well.
Question:	Is this for a single clip, or are there multiple clips in this package
Answer:	Came with 3 each clips.
Question:	How many screw/rivet holes are in this product? Only one is visible in the picture, but it seems like there could be more
Answer:	As others have said, there's only one hole, I needed another hole so I drilled one. Being stainless spring steel it's a little tough to drill but a good sharp bit and it went okay
Question:	What size screw posts fit the hole (1/4 or 1/8 or other (please specify)). Thank you in advance for any assistance you can offer. prefer Tandy screw
Answer:	the screw post is 3/16", the overall with is 7/8" length is 3" and a depth of approx .5" at the fold
Question:	I have awful arthritis, are these hard to open
Answer:	I have arthritis with painful finger joints. I do not have a problem with these clips. They are tight enough to hold two pieces of cotton fabric and also does a good job holding quilt layers. They are big enough to easily grab. They have allowed me to continue to sew. I also have the smaller ones. They are harder to hang on to but I still like them.
Question:	Did anyone order the mixed set? Are they evenly distributed color wise? I'm really wanting similar numbers per color. Thank you
Answer:	no, I think there are more of some colors
Question:	I want to make sure I order the right size? I want the mini ones
Answer:	I have 3 sizes...all good for different purposes. The regular, I think original Clover clips, may be called mini. They are 1" long. I also bought off-brand mini clips thru Amazon, just as good, and I like them better, because they are 1-1/2" long and easier for me to grip. I have jumbo clips that are 2-1/4" long that are good for all sorts if things. They have a hole at the end where I can hang something up on Command Strip hangers. Then I have some very small clips that came in an order of mini clips purchased through Amazon, they are 1" and the nose on them, the "bite" is only 3/8". The regular mini clips, the bite is 7/16" (almost 1/2"). I find each if the 3 sizes useful but mostly use the mini clips for clipping quilt binding before sewing it on.
Question:	How wide does this clip open
Answer:	I use these for sewing/quilting...they open wide enough to hold a few layers of fabric and fluffy batting. Upon checking, they hold 10 sheets of regular paper. However, because of the design and size, the hold is not very deep...only on the edge. They are also very easy to open and close.

Product description

These trigger lobster clasps are made of rust and corrosion resistant zinc alloy material

Overall length is 2.1",Inner width is 1"(26mm)

Have 1" and 1-1/2" width to choose, pls choose the correct size you need

Gunmetal bronze and silver color to choose, pls choose suitable color you need

Use special new technology electroplating process to make really shinning color and smooth finish clasps

The actual product color is more fantastic than you see on picture

These are thick,sturdy and strong buckles,Provide maximum strength and heavy duty steadfastness

Used for webbing,straps,wires,cords,pet collars,leather belt and so on



We also supply various size lobster clasp and other different buckles like tri glide buckles,D ring,overall buckles,snaps.You could find from our Amazon store"DGOL"



Package included:

8pcs 1" silver color trigger lobster clasps

• MATERIAL: ZINC ALLOY QTY: 8PCS SILVER 1" TRIGGER CLASPS
• SIZE: OVERALL LENGTH IS 2.1",INNER WIDTH IS 1"(26MM)
• WE HAVE 1" AND 1-1/2" CLASP BUCKLES TO CHOOSE,ALSO HAVE SILVER BRONZEAND GUNMETAL COLOR FOR EACH SIZE,PLS CHOOSE THE SUITABLE SIZE AND COLOR
• USE SPECIAL NEW TECHNOLOGY PLATING PROCESS TO MAKE REALLY SHINNING COLOR AND SMOOTH FINISH CLASPS,THESE ARE NICE DESIGN LOBSTER CLASPS
• USED FOR WEBBING,STRAPS,WIRES,CORDS,PET COLLARS,HANDBAGS,PURSES,BACKPACKS,LEATHER BELT AND SO ON

User questions & answers

Question:	What is the maximum load that these clips can withstand
Answer:	Used mine for suspenders. Some would way an me not being one of them that’s a pretty good load.
Question:	How much weight can these bare
Answer:	Not sure. I use them for key rings.
Question:	How much weight can these bare
Answer:	30/35 non hard pullers
Question:	What is the measurement of the eye of the clasp
Answer:	The widest place of the top is about 1/2",also could open 1/2".

Product description

Isn't it just frustrating when we need to spend so much time in untangling our earphones or chords before we can use them? Now, we have a solution to fix that!



Genuine Leather Cable Holders are the ideal accessories that you should need on your desk or pouch everyday. They are carefully hand-stitched to perfection, made of high quality durable genuine leather that will becomes softer and more attractive over time.

With a set of 10 cable holders, you can connect 2 or more together for those thick, long cords. Using the snap lock closure, you can easily have your earphones, cables and other digital connectors rolled in a perfectly organized way. Definitely something you need today!





Package Included: 10Pcs Leather cord organizer



PS: Use 2 or more cable holders together for holding thick, long cords

• Fashion and function are one in the same. Keep your cords, cables, earbuds and chargers securely organized and looking good. The metallic snap is easy to pop open and close, but will hold together even on the bumpiest of journeys.
• Throw it in your bag and go! No more tangled or broken cords due to improper storage. The small, portable size makes these little tacos perfect for keeping together your electronic accessories and supplies while you travel!
• Made of crazy horse leather.Snaps shut with rustic metal button. Comes in a variety of colors to suit your style
• Versatile - Use 2 or more cable holders together for holding thick, long cords
• Package Included: 10Pcs Leather cord organizer

User questions & answers

Question:	Length of long? Length of short
Answer:	These are 2.5 in. long and 1.5 in. between the snaps.
Question:	What does it mean in the item description that they are "Made of crazy horse leather
Answer:	Crazy horse leather is a kind of leather used in the manufacturing industry. I worked for a shoe company for 15 years. It’s a very good leather.

Product description

You are looking at one brand new Tandy Leathercraft Small Holster Black Belt Clip. This item 1238-24 measures 7/16" x 2-3/4" (11 mm x 6.9 mm). These clips are riveted on the leather. Thank you for looking.

• Condition - New
• Brand - Tandy Leather
• Craft - Leathercraft
• Product - Small Belt Clip

User questions & answers

Question:	How wide is this clip
Answer:	Measurements:7/16" x 2-3/4" (11 mm x 6.9 mm
Question:	What size is the screw hole
Answer:	I'm not sure exactly but I used a number eight machines scrow and it fit through the hole comfortably so probably quarter inch may be slightly less.
Question:	How strong is the spring steel, will it hold its shape over time
Answer:	It's pretty strong, I'm happy with it
Question:	What is the actual length of this product? The "product description" says 2.75", but one reviewer reports about 4". Thanks
Answer:	2.75 inches. 4 inches would be the total length without the bend.

• SPECIALLY CUSTOMIZED FOR iPhone 11 & XR - This horizontal holster case is specifically designed to provide durable protection for your iPhone 11 & XR equipped with a slim case (a looser fit for phones without a case)
• SLEEK DESIGN FOR COMFORT AND PROTECTION - Protect your smartphone from scratches, abrasions, and bumps with this durable Turtleback Case. It is made from premium bonded leather to ensure your phone stays free from damages. In addition, its sleek black design makes it easy to pair with rustic jeans or polished slacks.
• STRONG MAGNETIC FLAP CLOSURE - Ensure your phone's safety and stability with its strong rare-earth neodymium magnet flap closure. Its ergonomic design keeps your phone intact inside the pouch even when you're on the move. Whether you're walking or running, the magnetic flap will remain secured and close.
• HEAVY DUTY METAL BELT CLIP - This leather case has a removable rotating metal clip that can be clipped on your belt. It is heavy duty and will not be easily removed from your belt. Rest assured that your smartphone remains in your possession even when you're on the move.
• MADE IN USA: Proudly designed and manufactured in the USA. 90-Day money-back guarantee. Interior Dimensions are 6.15 x 3.20 x 055 in..

User questions & answers

Question:	Will the vertical model work if I rotate the clip to wear horizontally
Answer:	Yes, this ( vertical ) model works well when I turn it horizontal. But do be sure which horizontal position you use, because this is how the unit can be detached from the clip. I have been really enjoying this phone case. Do know, it is magnetic to keep the flap close and that magnet will grab anything near it.
Question:	Is this pouch feminine
Answer:	That is subjective but the pouch was designed with ergonomics and durability at the forefront.
Question:	Will this fit an iPhone Pro with a Spigen case
Answer:	Ask Cynthia Marshall (Turtleback Case) . she can give you dimensions and what holster will fit phones with different protective cases Gerry Bennett
Question:	Will the clip attach to a woven leather belt
Answer:	I don’t see why it wouldn’t. It is a leather covered clip. I just use mine on a regular leather belt.

Product features

Fits Phone Only & Slim Protective Cases

Compatible with Phone Only or Phone with Slim protective cases. To find a case that fits a search for B07ND3YDK2.

• Available in Vertical & Horizontal
• Leather with Black Belt Clip

Fits Phone Only & Slim Protective Cases

Compatible with Phone Only or Phone with Slim protective cases. To find a case that fits a search for B07ND3YDK2.

• Available in Vertical & Horizontal
• Leather with Metal Ratcheting Belt Clip

Fits Phone Only & Slim Protective Cases

Compatible with Phone Only or Phone with Slim protective cases. To find a case that fits a search for B07ND3YDK2.

• Available in Vertical & Horizontal
• Rugged Nylon with Metal Ratcheting Belt Clip

Replacement Clip & Additional Clips

Get replacement belt clips for Turtleback Cases. To find a replacement belt clip search for B00RDDNDI8.

Fits Medium Protective Cases & Fits Otterbox Commuter

Compatible with Otterbox Commuter Case and other medium size protective cases. To find a case that fits a search for B07P24JP6Y.

• Available in Vertical & Horizontal
• Leather with Black Belt Clip

Fits Medium Protective Cases & Fits Otterbox Commuter

Compatible with Otterbox Commuter Case and other medium size protective cases. To find a case that fits a search for B07P24JP6Y.

• Available in Vertical & Horizontal
• Leather with Metal Ratcheting Belt Clip

Fits Medium Protective Cases & Fits Otterbox Commuter

Compatible with Otterbox Commuter Case and other medium size protective cases. To find a case that fits a search for B07P24JP6Y.

• Available in Vertical & Horizontal
• Rugged Nylon with Metal Ratcheting Belt Clip

Replacement Clip & Additional Clips

Get replacement belt clips for Turtleback Cases. To find a replacement belt clip search for B00RDDNDI8.

Fits Large bulky Protective Cases | Fits Otterbox Defender

Compatible with Otterbox Defender cases and other large bulky protective cases. To find this holster case search for B07NSB45KQ.

• Available in Vertical & Horizontal
• Leather with Black Belt Clip

Fits Large bulky Protective Cases | Fits Otterbox Defender

Compatible with Otterbox Defender cases and other large bulky protective cases. To find this holster case search for B07NSB45KQ.

• Available in Vertical & Horizontal
• Leather with Metal Ratcheting Belt Clip

Fits Large bulky Protective Cases | Fits Otterbox Defender

Compatible with Otterbox Defender cases and other large bulky protective cases. To find this holster case search for B07NSB45KQ.

• Available in Vertical & Horizontal
• Rugged Nylon with Metal Ratcheting Belt Clip

Replacement Clip & Additional Clips

Get replacement belt clips for Turtleback Cases. To find a replacement belt clip search for B00RDDNDI8.

Premium Neodymium Magnets | Closure System

This holster case features an ergonomic design, with premium neodymium magnets that ensure a secure closure. The magnets are hidden inside the case's flap and lock quickly and efficiently every time you fold the case. This closure style quickly access to your phone, meaning that it will always be ready to use and accessible at your hips.

Made in U.S.A

Turtleback Case products are designed, manufactured and assembled in Sylmar, California. Our design team applies their extensive experience and knowledge to provide cases that enhance the product and meet their specific needs. We also attribute the evolution of our products to consumers who've challenged us to take the idea of a protective case to the next level.

Product description

We know the pain of having a loose belt clip and phone falling off your Holster constantly when in motion. That is why Stronden Leather Holster are designed to be Secured and Durable for everyday use.



Don't worry about dropping your phone as our magnetic closure offer secure and easy access to your phone. The Belt Clip is made out of Ballistic Nylon which is Stronger than Plastic and more Flexible that Metal. Metal Clip will bend after extensive use versus Ballistic Nylon Belt Clip which will stay in shape even after extensive use.



At Stronden we want to create quality products that address your concerns.

(This Holster Will NOT Fit iPhone 12, 12 Pro, XR or 11 with Bulky or Armor Case on.)

• Handmade Holster Stylishly Designed for iPhone 12 / iPhone 12 Pro / iPhone 11 / iPhone XR with Regular Case on
• Built in Card Slot to Securely Hold Credit Card / ID / Cash for Easy Acess
• Strong Double Magnet Designed for Secured Closure and Convenient Access to the Phone
• Durable Ballistic Nylon Belt Clip with 2 Additional Belt Loop for Extra Hold & Everyday Usage
• Holster Dimension 6.1" x 3.3" x 0.6". Fits belt up to 1.75" wide

User questions & answers

Question:	I couldn’t find a case that would fit my iphone mini with my all i closed water proof case. will this work for my phone
Answer:	Yes, it is. And you can locate the installation video in the last product image.
Question:	Will my slim outer box fit into this case
Answer:	No, this item is not compatible with your model. Here is the correct replacement compatible with your model 14-dh1008la: http://www.amazon.com/dp/B08R72NLHZ And you can locate the installation video in the last product image.
Question:	What are the inside measurements of this? My phone is 6.42” but 3.4” by .51” / 16.31cm by 8.64cm by 1.30cm
Answer:	Yes, but be careful not to wipe the iris of the camera
Question:	What are the inside dimensions of this case
Answer:	I didn't use it because you need to know how to weld all the wires there..

Product features

BELTRON Belt Clip Holster Compatible with LifeProof FRE Series - iPhone XR 6.1"

• This BELTRON is designed and engineered to be compatible with the LifeProof FRE for the Apple iPhone XR case.

• Quick release latch allows you to easily and securely insert and remove you device single-handedly.

• Heavy duty rotating belt clip with exclusive built-in kickstand designed to easily adjust for either right and/or left handed use.

COMPATIBILITY: LifeProof FRE Case for the iPhone 11 6.1"

Please verify you own an LifeProof FRE case for the iPhone XR prior to purchase.

Order today and find out why BELTRON Accessories are trusted by Police / Fire / EMS agencies and professionals nationwide!

THIS STAMP IS A PROMISE.

Order with confidence: Being a part of the BELTRON family, we're here to help! Please reach out to us should you have any questions or concerns regarding this product and we will do our best to make things right.

All product names, logos, and brands are property of their respective owners.