12 best accessory power iphone repair kits

Product description

☆ PLEASE NOTE:



✎This item is compatible with the iPhone 11 6.1 inch ONLY. Model number on the back cover: Model A2111, A2223, A2221.Please confirm your phone model before you order the item.



✎These iPhone screen repair kits without Ear Speaker, Front Camera and Proximity Sensor. Please transfer them from your old screen and install them.



☆ATTENTION:



⚡ Please keep your phone power off and disconnect the battery cable when assembling.



Every kit comes with a instruction and precision tools, but it's recommended to search for related installation videos on YouTube.Do not forget to test the LCD.



⚡ Use the correct screwdriver to open the screws. Need to remark the screws and keep in mind its’ original position.



⚡ Carefully remove the home button, otherwise it will break easily.



⚡ Avoid to pull the flex cable too hard. Do not press the upper two corners of the LCD screen, otherwise it will be easily damaged.



☆TROUBLE CLEARING:



If your phone meet some problems like cannot turn on, touch insensitive, flash, lines on screen etc,you can try the following steps:



🔧 Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.



🔧 Clean the connector on the mainboard, disconnect and reconnect the flex cables from the motherboard side.



🔧 Reset the phone by pressing both Power and Home Button together for at least 15 secs, power on.



🔧 Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away,you can try to put the phone a night.



☏ If you have any other questions, you can contact us through Amazon.



☆PACKAGE LIST:



1* Screen Replacement for iPhone 11

1* Set Repair Tool Kits

1* Screen Protector

1*Waterproof Seal

1* Instruction

• 【Compatibility】This screen is only for iPhone 11 LCD replacement, model A2111, A2223, A2221, 6.1 inch. Please DO NOT use it on any other models like iPhone X/XR/XS/XS MAX/11 Pro, etc.
• 【Good Quality】We have tested every part of each screen to ensure that they works perfectly. 100% tested before shipping. High resolution, high brightness and sensitive touch. If you have any issue with this iPhone 11 screen, pls contact us without any hesitation by email.
• 【Replace Any Damage】Replacing old, broken, cracked, damaged, unusable ones, dead pixels, wrong colour , touch problems, and make your device become new again.
• 【Easy to Install】To save your time, all LCD iPhone 11 display is pre-installed with Ear mesh and Camera & Sensor holder. It's better to refer to the installation video on YouTube before installing it.
• 【Packing &Service】1* Screen replacement for iPhone 11, A set of repair tools+ 1* tempered glass+ waterproof seal + instructions. 180 days-warranty for new iphone 11 display replacement or refund for non man-made quality issues.

User questions & answers

Question:	Is it easy to install the screen
Answer:	Yes,it's easy. I watched a video on YouTube,just follow the video steps carefully.If you lack hands-on ability， you can find a professional to help to install.
Question:	Does the face id work
Answer:	Yes, Face ID would still work with this replacement screen.Please pay attention when you disassemble the camera, please do not wipe, it may damage the iris on the camera and make facial recognition unusable.
Question:	Does this work with the A2111 iPhone 11 model
Answer:	Yes.And it fits iPhone 11, Model A2223, A2221，too. Please confirm your phone model before you order the item.
Question:	Is there a warranty? How long is the warranty period
Answer:	yes，there is. The warranty period is 12 months, and there will be refunds for quality problems caused by non-human factors.

Product description

GANGZHIBAO 90 in 1 screwdriver set is a multi-functional electronic repair tool set. We have made improvement for

a long time, this tools kit fits into the devices around our daily life both home and work.



Advantages:

1✔ 100% New precision screwdriver repair tool kit with excellent quality.

2✔ Protect personal privacy and property.

3✔ Unique humanized design.

4✔ Multi-function: Meet different fix needs.

5✔ Practicality: Suitable for most electronic digital products/home appliances.

6✔ Portable: 2 iPhone 6s size allows you to easily carry.

7✔ Material: Tough Steel + Skillful Rubber + Durable Plastic/Magnetic Screwdriver Driver/Anti-static tweezers



Package includes 90 pcs:

Screwdriver Bits:

✔ Hex: H0.7 H0.9 H1.3 H1.5 H2.0 H2.5 H3.0 H4.0 H4.5 H5.0 H6.0

✔ Nut Driver: 2.5 3.0 3.5 4.0 4.5 5.0 5.5mm

✔ Flathead: 1.0 1.5 2.0 2.5 3.0 3.5 4.0mm

✔ Phillips: PH000 PH00 PH0 PH1 PH2

✔ Torx: T2 T3 T4 T5 T6 T7

✔ Torx Security: T8 T9 T10 T15 T20

✔ Tri-wing: Y0.6 Y2.0 Y2.5

✔ Pentalobe: 0.8 1.2 1.5mm

✔ Square: S0 S1 S2

✔ U-shaped: U2.6 U3.0

✔ Triangle: 2.0 3.0

✔ SIM Eject Bit: 0.8mm

✔ Anti-Phillips: PH2

Pry Tools:

✔ 3x Metal Double-sided Spudger

✔ 1x Metal Pry Scraper Tool

✔ 1x Ultra-thin Steel Spudger

✔ 9x Orange Plastic Pry Tool

✔ 4x Orange Triangle Paddle

✔ 1x Blue Plastic Spudger

✔ 1x Black Separate Tool

✔ 1x LCD Suction Cup

Other Tools:

✔ 1x Dust Brush

✔ 1x Utility Knife

✔ 1x 6 Inch Metal Ruler

✔ 3x ESD Tweezers

✔ 1x Anti-Static Wrist Strap

✔ 1x Demagnetizer / magnetizer

✔ 1x Non-slip Screwdriver Driver Handle

✔ 1x 1/4 Inch Screwdriver Adapter

✔ 1x Flexible Shaft Extension

✔ 1x Solid Shaft Extension

✔ 1x Portable Oxford Bag

• 【Repair tool kit】 GANGZHIBAO 90 in 1 precision screwdriver set is a professional repair tools kit for iPhone, iPad, MacBook, Cell Phone, PC, Computer, Laptop, Tablet, Camera, Game Consoles, PS4/Xbox Controller, Watches, Glasses and other electronic
• 【Electronic Screwdriver Set】 This versatile electronics repair kit has 56 different screwdriver bits ,p2,p5, phills screwdriver set for iphone ,macbook ,t5,t6,t8,t10 torx screwdriver repair for ps4,xbox.Nintendo Switch Whatever you are a professional or amateur in the IT world, you can easily use this electronics tool kit to repair pc, computers and laptops,phone. This helpful repair kit is also as a cool and decent gift for your friends, father, husband, son, etc.
• 【Various repair tool】Anti-static wrist strap ,complete pry tools set, Anti-Static ESD tweezers, magnetizer, for pc ,computer ,phone etc. With this repair tool kit, you can fix everything from computer to electronic, such as replacing the macbook screen, battery or repairing pc,phone, laptop by yourself to protect privacy.
• 【Humanized】 Solid and flexible shaft,1/4 inch screwdriver adapter， handle designed a special hole to increase power, you can use it stably and efficiently，Magnetic Screwdriver Bits are made of quality stainless steel - S2, whose hardness is up to 60HRC. A Great GIFT for IT technician, technical engineer, electronics enthusiast, fixer, hobbyist, DIYer, student, housewife, ect.stocking stuffers for men,women,tee
• 【Customer First】disassembly, pry opening tool for macbook, , tablet, computer, pc ,phone，Christmas stocking stuffers for men,women,teen if you have any questions, we will try our best to solve your problem within 12 hours.

User questions & answers

Question:	T6 and t7 are regular torx or security torx? The product text description says regular, but the photo has the security-type logo under these bits
Answer:	The set I purchased has the security bits.
Question:	I see some tools sticking out at the top when the kit is open, but they're not sticking out when its closed. Anything 2 protect them from falling out
Answer:	I think they were pulled out slightly for the picture. Everything fits tight,and doesn't fall out or stick out when closed. Really an excellent value.
Question:	i want to install an ssd drive on my laptop. can this set work well
Answer:	Yes
Question:	Is the screwdriver tip quality good? How magnetic is the 90 pcs screwdriver kit
Answer:	Good for the purpose intended. Magnet holds the tiny screws securely.

Product features

GANGZHIBAO 90pcs Electronics Repair Tool Kit Professional

GANGZHIBAO 90 in 1 precision screwdriver set is a multi-function tool kit and is is designed to service For macbook iPad, iPhone, PC, Watches, Laptops, Phones, Game Consoles, and other electronics. High-performance Kit The ultimate high-performance bit kit including all essential tools is great for every DIYer, fixer, hacker, hobbyist, and handyman. It's all-new and it's all-powerful. This is a set of tools you can trust, will not let you down. stocking stuffers for teen ,adults The kit is a great gift to give your friends, family and other people in Thanksgiving Day, Birthday, Father Day etc.christmas stocking stuffers for teen ,adults

Magnetic Driver Kit with Flexible Shaft

Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC

Repair upgrade kit

Anti-slip handle with rotatable design make the work easier and faster.Anti-slip Metal Spudgers are made of sturdy stainless steel, and its toughness is stronger than ordinary alloy pry tool. ESD Tweezers are made of durable stainless steel. It has strong corrosion resistance and its tip is not easy to strip and deform.

Screwdriver set for computer ,iphone ,macbook,phone ,oc

HUMANIZED DESIGN: Ergonomic and press & push design handle,it is comfortable to hold even for the long-time use. For the bits that are often used in repairing electronic products, p2 pentalobe, p5 pentalobe screwdriver,T6 Torx,T5 Torx and PH000 Phillips.

56 magnetic screwdriver kit

✔ Hex: H0.7 H0.9 H1.3 H1.5 H2.0 H2.5 H3.0 H4.0 H4.5 H5.0 H6.0 ✔ Nut Driver: 2.5 3.0 3.5 4.0 4.5 5.0 5.5mm ✔ Nut Driver: 2.5 3.0 3.5 4.0 4.5 5.0 5.5mm

✔ Flathead: 1.0 1.5 2.0 2.5 3.0 3.5 4.0mm

✔ Phillips: PH000 PH00 PH0 PH1 PH2

✔ Torx: T2 T3 T4 T5 T6 T7

✔ Torx Security: T8 T9 T10 T15 T20

✔ Tri-wing: Y0.6 Y2.0 Y2.5

✔ Pentalobe: 0.8 1.2 1.5mm

✔ Square: S0 S1 S2

✔ U-shaped: U2.6 U3.0

✔ Triangle: 2.0 3.0 ✔ SIM Eject Bit: 0.8mm ✔ Anti-Phillips: PH2

other 34 upgrade kit

✔ 3x Metal Double-sided Spudger ✔ 1x Metal Pry Scraper Tool ✔ 1x Ultra-thin Steel Spudger ✔ 9x Orange Plastic Pry Tool ✔ 4x Orange Triangle Paddle ✔ 1x Blue Plastic Spudger ✔ 1x Black Separate Tool ✔ 1x LCD Suction Cup ✔ 1x Dust Brush ✔ 1x Utility Knife ✔ 1x 6 Inch Metal Ruler ✔ 3x ESD Tweezers ✔ 1x Anti-Static Wrist Strap ✔ 1x Demagnetizer / magnetizer ✔ 1x Non-slip Screwdriver Driver Handle ✔ 1x 1/4 Inch Screwdriver Adapter ✔ 1x Flexible Shaft Extension ✔ 1x Solid Shaft Extension ✔ 1x Portable Oxford Bag

Product description

Color:For iphone XR screen replacement.

Compatible: Only fit for iPhone XR Screen Replacement (Models: A1984, A2105, A2106, A2108) 6.1 inch.Please make sure your iPhone model.

Tips Before Installation:

1.We highly recommend watching the video to become familiar with the procedures before attempting the installation.

2.Power off your iPhone before beginning disassembly .Do not press the top and bottom of the backside, or this screen replacement for iPhone XR will be damaged.

3.The flex cables are very fragile,please be careful to remove them during the process of replacing the screen replacement parts.During installing, don't press the both upper corners,or the lcd screen will be damaged.

4.The front camera not included in the new screen, you need to remove carefully for your old screen. The front camera are easily damaged when you remove please be careful.

5.If there is any question or problem need our help, please contact us via Amazon message and a PROMPT SOLUTION will be given to you in 24 hours.

• 【Compatible】This product is only for iphone XR screen replacement.(model A1984, A2105, A2106, A2108) 6.1 inch.NOT for iPhone X/XS/XS max,please confirm your phone model before you order the item.
• 【Easy to Install】You just watch a YouTube video for iphone XR screen replacement,according to the video operation,you can easily install a new screen.A large number of repair shops buy this screen from our shop to replace customer's mobile phone screen.The screen display is as good as the original.
• 【Good Quality】All screens for iphone XR screen replacement parts of our products are rigorously tested before leaving the factory to ensure that they are in good condition before leaving the factory. For quality problems caused by non-human factors, you can get a new replacement or refund service.
• 【Replace Defective Screen】This iphone XR screen replacement can be used for repairing or replacing any damage, like replace old, cracked, broken, damaged, dead, fault screens display.Also solve display and dead pixels problems.
• 【Note】We provide the best service to our customers. If there is any installation question with this iphone XR screen replacement, please reach out us via Amazon message for assist. We will heip you solve the problem as soon as possible.

User questions & answers

Question:	Why aren’t any reviews for the xr replacement screen? they are all for the 6g
Answer:	We replaced our XR screen. This worked great!
Question:	Does this screen have the same brightness as original screen
Answer:	Yes.The screen display is the same as the original display.
Question:	Does this screen work for model XR A
Answer:	This screen is work for iphone XR Model A1984, A2105, A2106, A2108.
Question:	My screen won’t come on I followed all the steps and it still won’t come on
Answer:	Disconnect the battery cord and check the screen cord and the metal seat for any damage.If there are no problems, please follow the video installation tutorial to install all the connection cables and restart the machine for a try.If that still doesn't work, don't worry. We offer a free return and exchange service.If you have any questions, please find your order on Amazon and then contact us.

• Compatibility: This iPhone 7 screen replacement ONLY for iPhone 7 4.7 inch.Compatible with models: A1660, A1778, A1779. NOT for iPhone 7 Plus.
• Great Replacement: To replace the faulty & defect LCD Display Touch Screen Digitizer Assembly. Such as the screen dose not respond properly, display problems, distortion pixels, cracked LCD screens, wrong color issues and old & dead LCD.
• Notes: You need to transfer home button with fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.
• Package: iPhone 7 Digitizer Display,QTlier iPhone 7 screen adhisive,Repair tools same with the picture shows are included.
• Quality: All screens 100% Inspected by professional QC team before shipping and working perfectly,more wearable.

User questions & answers

Question:	Is it the full screen or just the outline of the iPhone
Answer:	full screen
Question:	How easy is it to install
Answer:	I can't say how easy it is, but just follow the instruction of installation. I think you may find a lot of vedio clips on the youtube
Question:	Anyone know if this item fits the SPH-L900 Sprint Samsung Galaxy Note II
Answer:	Yes it does
Question:	Do I have to transfer anything from the old screen
Answer:	Front-facing Camera, earpiece, home button need to be removed from the old screen.

Product features

Purchase Notes:

a) Only for iPhone 7 (A1660, A1779, A1778)

b) It never come with HOME BUTTION, fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.

c) To replace the faulty & defect LCD Display Touch Screen Digitizer Assembly. Such as the screen dose not respond properly, display problems, distortion pixels, cracked LCD screens, wrong color issues and old & dead LCD.

FAQ: 1.After install ,the screen came out black or unresponsive,what should I do ?

Could you please check and do it as below? a.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.

b.Disconnect and reconnect the flex cables from the motherboard side.

c.Then Reboot: Hold buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again.

FAQ: 2.Why the touch ID cannot work ?

Please transfer the home bottom from your orginal screen,Because only the orginal screen can make your touch ID work . This item is not include home bottom

Anti Fingerprint, water and oil

Fingerprint-resistant oleophobic coating. Anti fingerprint, water and oil.

High Resolution

Equipped with this iPhone screen, you can find a clearer and more colorful world on the screen and enjoy the original visual experience.

Hard Tempered Glass

Made from hard tempered glass. Do not need to worry about scratches or hammers.

Product description

Only fit for iPhone X screen replacement 5.8 inch, compatible with (model A1865 A1901 A1902) 5.8"



NOTE:

①This screen replacement kit will only compatible with iPhone X 5.8 inch.

Please make sure you identify your Phone correctly before purchase.

②The repair tools comes in the package.

③This iphone X screen repair kit without Proximity Sensor, Ear Speaker and silver metal plate, so please transfer them from your old screen and install them.



INSTALLATION STEPS:

1. Power off your phone

2. Remove the screws on the bottom

3. Lift up the screen till gap with suction cup

4. Open the rear case with triangle rocker

5. Open the screen and separate from the back cover

6. Remove and remark all screws from the battery connector bracket

7. Disconnect battery cable, display and touch the cable

8. Remove home button assembly of the old screen



INSTALLATION NOTE:

1. Don't press four corners and be careful when lock screws, otherwise it will cause inner glass broken.

2. Make sure each screw is installed back to its original hole.

3. Be gentle and cautions to the flex cable connectors when installing.

4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.

5. DO NOT over-bend or use excessive force to tear it.

6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, the screen will not turn on.



PACKAGE LIST:

1*LCD replacment for iPhone X 5,8 inch black

1*Replacement Repair Tools

• 💰【COMPATIBILITY】👉:This screen replacement is only fit for iPhone X Black 5.8 inch (Model A1865, A1901, A1902). NOT for iPhone XR/XS,please confirm your phone model before you order the item.
• 💰【GREAT REPLACEMENT】👉:Replace any damage replacing cracked, broken, dead pixy, damaged, touch response issues, wrong color issues, non-functioning screen, Perfect replacement choice for making our phone brand new.
• 💰【SOMETHING YOU SHOULD KNOW】👉:Every kit comes with a screen replacement assembly, instruction and precision tools, and due to the iPhone X screen WITHOUT proximity sensor, earpiece and silver metal plate, so you need to TRANSFER them FROM YOUR OLD SCREEN.
• 💰【INSTALLATION NOTE】👉:Due to this repair parts , any inappropriate install will make the screen no-working, it need professional skills to install the lcd screen, so we suggest you replace the new screen in a professional repair center , it will make sure save your phone and your money!
• 💰【SATISFACTION SERVICE】👉:There is a strictly inspection for each screen before shipment.If you need any help or HAVE ANY PROBLEM, PLEASE CONTACT US with no hesitation,we will solve your problem as soon as possible.

User questions & answers

Question:	is this just the screen or the digitizer LCD as well
Answer:	Screen

Product description

Why CLNGAI Screen?

 CLNGAI is a manufacturer's factory that has been focusing on screen replacement for many years. Customer satisfaction is our ultimate goal.

The real manufacturer factory, Independent Research and Development Pepartment, Independent QC team are on standby. At your service anytime.

Our iphone 6s lcd screen and digitizer full assembly is include home button. But it has not Touch ID Function. Need to transferthe original Home Button from old screen to retain Touch ID function.

Note:

1. We strongly recommend that you watch the operational video before installation through scanning the QR code in the packing.

2. When you receive the screen kit, please check the appearance of the screen and whether the cable is complete.

3. Powered off your phone and disconnect the battery cable before installation.

4. Please mark the position of each screw when you unscrew the screws. Because there are many screws in different sizes, if screws are placed in the wrong hole, the screen might be damaged.

5. After connecting the flexible cable, please test the LCD screen to ensure that all functions of the screen are in normal use.

 

FAQ:

1.After install ,the screen came out black or unresponsive,what should I do ?

a.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.

b.Disconnect and reconnect all the flex cables from the motherboard.

c.Then Reboot: Hold Buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again.

Package Includes:

- 1 x New Preassembled iphone 6s Screen Replacement Kit

- 1 x All Tools Kit

• 【Compatible】：This preassembled iphone 6s screen replacementCompatible with iPhone 6S Black 4.7 inch A1633, A1688, A1700, please confirm your phone model（back of the phone）before you place the order.
• 【Easy To Install】： This replaceable iPhone 6S screen is pre - assembled with home button, ear piece speaker, front camera, proximity sensor, metal back plate. Matched with screen protector and a complete repair tool kit. Follow the Video which you can get it by scanning the QR code on the packing, you can install easily with zero experience in this area.
• 【Function】：Our iPhone 6S LCD Screen can be used for repairing or replacing damage, like replace old, distortion pixel, wrong color, low display resolution, ghost touch, blue light etc,. Do not press aggressively on both upper corners of the new screen.
• 【High Quality】：Produced and inspected by a professional quality inspection team, each iphone 6s lcd screen is 100% tested strictly before shipping. Give you professional and perfect products.
• 【Warranty Service】: Your 100% satisfaction is our best impetus. We provide 6 months Warranty and Life-Time Technical Support to make your purchase risk-free. Give you a perfect shopping experience. If the iPhone 6S Digitizer has any problem, please contact us first, the customer service team will help you solve this problem in the first time.

User questions & answers

Question:	Is really very easy to install？I gonna buy one for my 15 yrs son,Thank you
Answer:	It is not very easy the first time but after you watch the tutorial on YouTube and attempt it twice things go back together more smoothly. My child (12) and I executed the replacement in about 2 hours. We had no previous experience. Now my child feel like replacing screens is not scary at all.
Question:	Is the cable easy to break
Answer:	The cables need to be installed carefully. So you need to find a bright place to operate.Be careful to buckle the interface
Question:	Is the 3D touch screen avaiable for both iphone 6s and iphone 6sp
Answer:	No. The screen for iphone 6s and 6sp is different. This screen only suit for iphone 6s.
Question:	Do I have to transfer anything from the old screen
Answer:	If you need the touch ID function, you need to transfer the home button from the old phone.

• Input current: 3.7-5V
• Output current: 0-3A
• iP6/6S/6P/6SP/7/7P/8/X/X MAX/XS MAX/11/11Pro/11Pro MAX
• Support more than 100 kind Android phones
• Compatible with most Android phones and iPhone

User questions & answers

Question:	What are the stickers intended for
Answer:	For battery connection, you can control the power on/off

Product features

Mechanic Power Boot Cable

Mechanic mobile phone DC power cables for iPhone Samsung Huawei Android cellphone repair tools, Mini DC power supply test cable motherboard activation boot cable

• SPECIFICALLY DESIGNED FOR IPHONE XR & IPHONE 11 - Maintain your resale value & protect your phone from dirt, scratches and cracks with this high-grade Japanese Asahi tempered glass.
• EASY INSTALL KIT FOR PERFECT, BUBBLE-FREE ALIGNMENT - Our simple install tool makes perfect alignment a breeze. If not, we'll send a new one for FREE. Kit includes: 2x glass screen protectors, 1x Easy App Tray, 1x instruction manual, 2x cleaning wipes, 2x microfiber cloths, and 2x dust removal adhesive strips.
• CRYSTAL CLEAR TRANSPARENCY - Experience the full effects of your stunning Apple iPhone display with this super thin, but 9H rated hard glass shield that protects your phone's front camera, ALS and proximity sensors without affecting your photos or 3D touchscreen sensitivity.
• CASE FRIENDLY FLAT DESIGN - Our tempered glass screen protector covers the flat portion of the screen only, leaving the curved edges free to fit your case better and reduce any non-adhesive white halo. Everything we do is designed to enhance your smartphone experience!
• POWER THEORY LIFETIME GUARANTEE - We believe in providing our customers with superior quality iPhone accessories for an affordable price, along with exceptional customer support. That's why we back all of our screen protectors with a no-hassle Lifetime Guarantee.

User questions & answers

Question:	What cases does this screen protector work with
Answer:	From the way the protector sits a bit inboard of the screens edges, I’d say it’ll work with any case that does not have a clear screen cover of its own.
Question:	Will this protector fit a Samsung S9 plus
Answer:	It measures 2 1/2" x 5 1/2". I don't know the size for a Samsung S9 plus.
Question:	Is this for the bigger I phone
Answer:	No, not the one I ordered. Search for iPhone 11 Pro Max screen protectors if you have the phone with 3 camera lenses.
Question:	How easy is it to remove? Will it Crack if you try to remove it
Answer:	I’ve removed other screen protectors without any issues. I’d assume this one d cc’d an be taken off without cracking. I will say that the application system is the best!

Product description

We like to call it a win win purchase

▶ This screen kit is only compatible with iPhone XR (A1984, A2105, A2106, A2108). Don't try it on iphone X or XS.

▶ Please test all items before installation for the screen is easily broken,so carefulness is an indispensable part while installing.

▶ To provide customers the best service, all our products provide unconditional 30-day money back guarantee and 6-month manufactured warranty.



Your packing include:

1 x iPhone XR screen replacement

1 x 9H Tempered Screen Protecto

1 x Tempered Glass+Waterproof Adhesive

1 x Philips screwdriver

1 x Pentalobe screwdriver

1 x Triangle pry Pick

1 x Suction cup

1 x Dust wipes

1 x Sim card pin



Please pay attention before the iPhone installation:

1) Please check the LCD to make sure the flex cable is in good condition and there is no debris on the connector.

2) Watch through installation video tutorial before getting started. There are many of these tutorials in YouTube.

3) When reassembling your phone,please power off, and flex cable should connect one by one to the phone motherboard dock well.

4) The display data cable may pop off its connector. This can result in white lines or a blank screen

when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone.

5) Mark down all the screws you remove while disassembled the screen, incorrect placement of these

screws during reassembly Will cause permanent damage to your iPhone's logic board.

• 【Compatible Model】Compatible with -ONLY for iPhone XR (Model A1984, A2105, A2106, A2108) 6.1", NOT for iPhone X or XS.
• 【Easy to Install】For this iPhone XR replacement screen is packed with 1*OLED Display+A set of Repair tools+1* Tempered Glass+Waterproof Adhesive. Also, installation videos will be sent to you after you placed the order.
• 【Quality Guaranteed】Replace/Repair your broken, old, cracked, shattered, damaged faulty iphone x OLED screen replacement display. Each assembly is strictly tested before shipping. If there is any problem, please contact us via Amazon message for solution.
• 【Note】On repairing the iphone XR replacement screen, If you meet with these issues, Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc. Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.
• 【180 days-warranty,Buy with Confidence】180 days-Warranty for new iphone 11 screen replacement or refund for Non man-made quality issues.

Product description

Product Name: iPhone 7 screen replacement black 4.7"



Color: Black



Compatibility:

This iPhone 7 screen replacement ONLY for iPhone 7 screen black 4.7" (A1660/ A1778/ A1779), NOT for iPhone 7 Plus 5.5".



Note:

The iPhone 7 screen replacement do not include the home button, ear speaker, front camera and proximity sensor,

NEED to transfer them from your original screen to the new one.



Installation Instruction:

☛ Watch installation video of iPhone 7 screen replacement before starting: https://www.youtube.com/watch?v=hIs6vLdHHKI

☛Make sure power off the phone before installation.

☛Use the correct screwdriver to open the screws. Mark the screws and keep in mind it's original location. These screws have different

size and length, if put into the wrong place, the screen may be damaged.

☛The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !



FAQ:



1. How do we solve it if the screen is blank/not lighting up/white line/flashing after installed?



RE: If the screen cannot turn on, that's because the LCD connector did not fully installed or got loose. When it happens, please reinstall the

connectors for several times. After installed the screen, please press the power button and the home button for 15 seconds to reset the screen.



2. What should we do if the home button does not work?



RE: The home button needs to be connected to the metal plate and then the cable on the metal plate needs to be installed to the logic

board. Please make sure both connectors are fully fitted and please gently install the connectors. To avoid any damage on the connector.



If have any questions, please contact us.

• 【Compatibility】ONLY for iPhone 7 screen replacement black 4.7 inch, NOT for iPhone 7 plus 5.5 inch. Please check your phone model before purchase.
• 【Note】This iPhone 7 screen replacement do NOT include the home button, earpiece speaker, front camera, sensor flex and LCD shield plate. It must transfer them from the old screen to the new.
• 【Application】Replace the screens that are cracked, broken, dead pixel, damaged, touch is not working, touch response issues, non-functioned screen.
• 【Shipment】Fast shipment from US Amazon warehouse FBA.

User questions & answers

Question:	Does it come with adhesive
Answer:	Sorry, the screen kit only contains the tools on the picture, no adhesive
Question:	After replacement the phone is stuck on the Apple... how can I contact the sellers
Answer:	You can find your order, click on the right side of the order details to contact the seller.
Question:	Are the tools able to disassemble the inside of the phone
Answer:	Of course, our tool can perfectly remove and install the screen.
Question:	I want a full iPhone screen, do you have it
Answer:	If you are talking about pre-assembled screens. iPhone 7 does not. Sorry

Product description

-Designed to be a direct drop in replacement charging flex cable, this kit is designed with the consumer in mind. To provide an easy to use kit to replace your damaged charging flex cable at a fraction of the cost charged at a repair facility.

-We also offer an optional Pro-Series toolkit used by professionals in the small electronics repair business.

Included with Certified Tools:

-2 Pry Tools

-2 Triangular Picks

-1 Philips Screwdriver

-1 Flat Screwdriver

-1 Penta-lobe Screwdriver

-1 Suction Cup

-1 MobilePrime™ Branded Cleaning Cloth

Included with Optional Pro-Series Tools:

-1 2.0x40mm Flat Drive

-1 1.5x40mm Phillips Drive

-1 0.8x40mm Pentalobe Drive

-1 Spudger Pick

-2x Plastic Pry-Tools

-1 Suction Cup w/Ring

-1 MobilePrime™ Branded Cleaning Cloth

-We provide technical support by email. Any questions about replacing your charging flex cable? Simply contact us via email and our technician will provide you with an answer within 24 hours!



-We at the MobilePrime™ have been in the electronics industry for 25+ Years. We are a family owned and operated business with customer service in mind. We guarantee the best possible transaction possible here on Amazon.com.



-Disclaimer: Upon opening your device, modifying or repairing your device may void your manufacturer’s warranty. We at the MobilePrime™ are not held responsible for any misrepresentations or misuses of our products by the individuals purchasing our items. MobilePrime™ is not held responsible for any damages done to the phone on behalf of the customer. Please consult us by email or a professional repair facility for further assistance if it is needed.

• Replacement Charging Charge Port Flex Cable for iPhone 6 Plus - 821-2220
• Repair Kit Designed By MobilePrime
• 30 Minute Installation Time!
• Guaranteed 60 Day Warranty Provided by MobilePrime
• We offer our standard Certified Toolkit, or our optional Pro-Series Toolkit. These can be selected above:

User questions & answers

Question:	Works on iPhone 6S Plus
Answer:	Yes, it works fine in my iPhone 6S Plus.

• 【Compatible】：ONLY for iPhone 7 Plus Replacement Screen Black 5.5 inch (Model:A1784, A1785, A1661), please confirm your phone model before you order the item.
• 【Replacement】：HICTKON iPhone 7 Plus LCD Screen Replacement can be used for repairing or replacing damage, like replace old, distortion pixel, wrong color, low display resolution, ghost touch, blue light etc,.
• 【Purchase Display Note】：This iphone 7 Plus Screen and Digitizer does not include Home Button, Camera, Earpiece and Metal Back. You must be transfer them from your old display. Only the Original “Home Button” will work properly with your Touch ID.
• 【Strict Testing Standards】：To ensure that each customer receives the perfect product. Each iphone 7 plus screen assembly is double tested strictly to ensure 100% in good condition before shipping and fast FBA delivery.
• 【Customer First Service】: We provide 6 months Warranty and Life-Time Technical Support to make your purchase risk-free. If the display de iphone 7 plus Digitizer has any problem, please contact us first, the customer service team will help you solve this problem in the first time. Your 100% satisfaction is our best impetus.

User questions & answers

Question:	How is the screen quality (color, clarity, etc) in comparison to the original screen
Answer:	Screen works great. Compared with the hundreds of dollars in the Apple Store for products with the same function, I think this saves money and time
Question:	I replaced the screen, but the "touch" doesn't work. Any ideas
Answer:	Make sure all the connectors are properly in place, if that doesn’t work trade it in for another one.
Question:	After the replacement, will the messages and APP in my phone be lost
Answer:	It won't be lost.Just replace the display, it has no effect on the storage of the phone
Question:	My iphone has a blacked out screen . Will the replacement be the solution
Answer:	For the case you mentioned, it should be a screen problem, a new replacement screen can solve it.

Product features

NOT Include Home Button

Please transfer the "home button" from your original iPhone, because the home button matches the phone motherboard, only the original "home button" can be used normally with your Touch ID.

Carefully remove the home button, otherwise it will break easily.

High Resolution, Wide Viewing

The new front panel and screen will look better. Smartphone is equipped with this highly transparent screen, you can find a clearer and more colorful world on the screen and enjoy the original visual experience.

More Sensitive Touch

The screen senses finger pressure and area, supports weak, neutral and strong, bringing you a smooth fingertip touch experience.

Anti Fingerprint, Water and Oil

Anti-fingerprint and anti-greasy coating. Anti-fingerprint, waterproof and anti-greasy. The oleophobic coating plays an anti-fingerprint function to a certain extent. This makes the screen feel smooth and waterproof, which helps to reduce many tactile obstacles caused by hand sweat.

Hard Tempered Glass

Made of hard tempered glass, Do not need to worry about scratches. Anti-fingerprint, flips water and oil, and can quickly wipe off dirt. A reinforced protective film for iPhone 7 Plus is also included.

Solve Your Problems

Screen replacements compatible with iPhone 7 Plus (A1784,A1785,A1661), can replace for example: distorted pixels, color errors, low display resolution, ghosting, blue light, etc..

Installation

1. First remove the screws on both sides of the data port.
2. Use suction cups and rockers to suck the screen together. Note: Dial into the upper part of the main key, slowly dial, do not pull too hard
3. Remove the suction cups, Open slowly by hand
4. Be careful when pulling the cable underneath, do not tear hard, slowly open upwards
5. Unscrew the screws that fix the patch of the line.
6. Use tweezers to remove the patch
7. Use the rocker to open the camera cable
8. Then pry open the fingerprint recognition line
9. Then pry open the display line
10. Finally pry open the contact wire
11. The screen achievement has been removed.

If you need to replace the screen, please follow the above steps to replace the new screen.

Done

Try it yourself.