11 best cell phone replacement parts

Cell phone replacement parts are components and accessories that can be used to repair or upgrade various aspects of a cell phone. These parts are essential for maintaining and extending the lifespan of mobile devices. Here are some common cell phone replacement parts and their purposes:

LCD Screens: LCD screens are among the most commonly replaced components. They display the visual content of the phone and can become damaged due to drops, impacts, or other accidents.
Batteries: Phone batteries have a limited lifespan and may need to be replaced when they no longer hold a charge or experience significant degradation.
Charging Ports: The charging port is crucial for recharging the phone's battery. Over time, it can wear out or become damaged, necessitating a replacement.
Back Covers: Back covers not only protect the internal components but also contribute to the phone's aesthetics. They may be replaced if they crack or get scratched.
Camera Modules: Both front and rear camera modules can be replaced if they become faulty, scratched, or damaged.
Microphones and Speakers: If you're experiencing issues with call quality or audio playback, you may need to replace the microphone or speaker components.
Home Buttons and Fingerprint Sensors: These components are essential for user navigation and security. Replacements may be necessary if they stop functioning correctly.
SIM Card Trays: SIM card trays can be easily damaged, and replacements are needed if they break or become lost.
Antennas: Cellular and Wi-Fi antennas can affect signal strength and connectivity. Replacing damaged antennas can improve network performance.
Buttons and Switches: Power buttons, volume buttons, and other physical switches can wear out over time and may require replacement.
Adhesive Strips and Sealants: When opening a phone for repairs, it's important to maintain its waterproof integrity. Adhesive strips and sealants help reseal the device after repairs.
Screws and Small Hardware: Replacement screws and small hardware components are essential for reassembling the phone after a repair.
Toolkits: DIY enthusiasts often require specialized toolkits that include screwdrivers, spudgers, and other tools to safely disassemble and repair cell phones.
Screen Protectors and Cases: While not internal components, screen protectors and cases are essential accessories for protecting the phone from damage.

When purchasing replacement parts for cell phones, it's essential to ensure compatibility with your specific phone model. Many manufacturers and third-party suppliers offer these parts, but it's crucial to choose reputable sources to ensure quality and compatibility.Additionally, some cell phone manufacturers and repair shops offer professional repair services for those who are not comfortable with DIY repairs.

Below you can find our editor's choice of the best cell phone replacement parts on the market

CLWHJ Premium Screen Replacement Compatible with iPhone 8 Plus 5.5 inch Full Assembly -LCD Touch Digitizer Display Glass Assembly with Tools, Fit Compatible with iPhone 8 Plus (White)

Based on 60 reviews Check latest price

1.compatible with iPhone 8 plus Screen , NOT for other models.
2.For defective, cracked, scratched and faulty lcd touch screen. Will share reference Instruction manual with every customer.
3.Brand-new, 100% tested before shipping and working perfectly ,For question regarding the warranty or product, please contact customer service in advance, and ask for their help to solve the problem.
4.For Home Button, Front Camera, please transfer the original the parts from your old screen.
5.Good customer service and Fast shipping from USA(FBA)+Free tool+Repair Manual

User questions & answers

Question:	Will the touch id still work after installing this iphone 8 screen replacement
Answer:	No
Question:	Does this kit comes with the screen adhesive tape
Answer:	I think you will need to cut a hose to the length you want. I rather doubt you can get more than 4 maybe 5 feet with the enclosed hose.
Question:	Is it the original apple components? Meaning original camera, etc
Answer:	It's a simple reel. If the hose collapses completely when on the reel, then the entire hose will need to be unrolled for maximum water flow. Good news is that if it lays flat, you will probably be able to load the reel with more hose than a non collapsing hose.

Product features

Description:

1. ONLY compatible with iPhone series to replace your old, cracked touch Screen.

（Please confirm your phone model before purchasing. The phone model can be confirmed on the back of the phone or from the system settings.）

2. Brand-new,Fast Shipment From US Amazon Warehouse, tested before shipping and 100% working well.

3. These iphone screen repair kits without Proximity Sensor, Ear Speaker,so please transfer them from your old screen .

for 6.41" Oneplus 6T/One Plus 6T A6010 A6013 AMOLED LCD Display+Touch Screen Digitizer Replacement Parts Full with Tool Black

Check latest price

Product description

New mobile phone replacement panel with tools

New mobile phone replacement panel with tools
The installation manual is not included, please check the installation video in youtobe
Before installation, please connect the flexible cable and test the screen. Then install
The package is wrapped layer by layer with a bubble bag. Prevent break
If you have any questions, please contact us by email, we will reply to your message within 24 hours, thank you

Ayake White Screen Replacement for iPhone 7 4.7" - Full LCD Digitizer Display Assembly with Front Facing Camera, Earpiece Speaker Pre Assembled and Repair Tool Kits

Based on 239 reviews Check latest price

This is an iPhone 7 (4.7 inches) display assembly/screen replacement part. (LCD, digitizers, and Front Panel all assembled together)
Repair your damaged/broken/cracked/shattered/Non Responsive iPhone 7 screen with this set. This display assembly will only compatible with an iPhone 7, but not an iPhone 7 Plus.
This part comes with the iPhone 7 speaker, front facing camera, and the cables attaching to them, which means you don't need to transfer them from your old screen onto this new one.
iPhone 7 homebutton is not available. You will need to transfer your phone's original home button assembly to this new display.
All the tool kits required to replace the screen are included in the package (spudger, screwdrivers, suction cup, and opening tool, no more extra items need to buy.

User questions & answers

Question:	does this come with the home button and front facing camera
Answer:	Yes, it will come with front camera and earpiece.
Question:	Good morning. I want to know if all parts are already placed on
Answer:	All but the home button is on
Question:	Does this product with with speaker and microphone malfunctions
Answer:	If you install the factory home button yes.
Question:	Good morning. I want to know if all parts are already placed on
Answer:	No

Product features

We are specialize in cellphone parts

iPhone 7 LCD Screen and Digitizer Full Assembly - Fix Kit (Top Quality Replacement)

Color: White

Compatibility: This part will only compatible with an iPhone 7, but not an iPhone 7 Plus. Please make sure you identify your iPhone correctly before purchase.

Note:

- This part includes front facing camera, earpiece speaker, and the LCD shield plate.

- You will not need to transfer these parts from your old display assembly to your new part.

Package includes:

- 1 x New iPhone 7 LCD Screen and Digitizer

- 2 x Spudger

- 1 x Pentalobe 5-point screwdriver

- 1 x Phillips #000 screwdriver

- 2 x Plastic opening tool

- 1 x Small Suction Cup

Instruction:

- Please refer to the instruction below, or search "iPhone 7 front panel replacement" on YouTube for a video instruction of how to do the replacement.

Step 1: Power off and disassemble screen

A. Power off your iPhone before beginning disassembly and remove the two 3.4 mm P2 Pentalobe screws on the bottom edge of the iPhone, next to the Lightning connector.

B. Pull up on the suction cup and insert the flat end of a spudger into the gap.

C. Slide an opening pick along the top edge of the iPhone to break up the remaining adhesive holding the screen in place.

D. Open the iPhone by swinging the display up from the left side, like the back cover of a book.

Note: Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

Step 2: Disconnect battery cable

A. Remove the following Phillips screws from the battery connector bracket:

Three 1.2 mm screws
One 2.4 mm screw

B. Remove the metal battery connector bracket from the iPhone.

C. Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

Note: Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

for 6.4" Motorola Moto G Stylus XT2043 XT2043-4 LCD Screen Touch Digitizer Replacement Parts Full with Tool Black

Check latest price

Product description

New mobile phone replacement panel with tools

New mobile phone replacement panel with tools
The installation manual is not included, please check the installation video in youtobe
Before installation, please connect the flexible cable and test the screen. Then install
The package is wrapped layer by layer with a bubble bag. Prevent break
If you have any questions, please contact us by email, we will reply to your message within 24 hours, thank you

HAIJUN Mobile Phone Replacement Parts for ZTE Blade Z Max / Z982 LCD Screen and Digitizer Full Assembly with Frame(Black) Flex Cable (Color : Black)

Check latest price

Product description

All tested ,100% work ! 100% Satisfaction Guaranteed

Before Installation Notes

1. Tips 1: Test before installation

When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.

Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.

Ensure you wear eye protection and be cautious not to cut your finger with the glass splinters.

2. Tips 2: Simulates testing

Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.

3. Tips 3: Do not over-bend cable

Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product

1. Replacement LCD screen + touch screen digitizer assembly for ZTE Blade Z Max / Z982

2. Replace the old, broken, cracked, damaged one

3. Make your device look more refreshing than ever

4. Completely fit and work

5. Each item has been checked and in good condition before shipping

6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Complete assembly Replacement Parts.
Replace your broken, damaged, cracked, unusable one
This listing is for a Brand New Spare Parts
Professional installation is required for this Repair Parts
ZTE Blade Z Max / Z982 LCD Screen and Digitizer Full Assembly with Frame(Black)

HAIJUN Mobile Phone Replacement Parts Back Facing Camera for Blackview BV9500 Flex Cable

HAIJUN

Check latest price

Product description

All tested ,100% work ! 100% Satisfaction Guaranteed

1. Back camera for Blackview BV9500.

2. Replace your broken or unworkable item with a new one.

3. Each item has been checked and in good condition before shipping.

4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Complete assembly Replacement Parts.
Replace your broken, damaged, cracked, unusable one
This listing is for a Brand New Spare Parts
Professional installation is required for this Repair Parts
Back Facing Camera for Blackview BV9500

for 5.7" LG K40 2019 X420 LMX420 LMX420EMW LCD Display Touch Digitizer Screen Replacement Parts Full with Tool Black

Check latest price

Product description

New mobile phone replacement panel with tools

New mobile phone replacement panel with tools
The installation manual is not included, please check the installation video in youtobe
Before installation, please connect the flexible cable and test the screen. Then install
The package is wrapped layer by layer with a bubble bag. Prevent break
If you have any questions, please contact us by email, we will reply to your message within 24 hours, thank you

Best Shopper - Replacement 3.8V Battery 7.98Wh 2100mAh EB-L1L7LLA Compatible with Samsung Galaxy Core LTE SM-G386W

Based on 1 reviews Check latest price

Product description

Best Shopper - Replacement 3.8V Battery 7.98Wh 2100mAh EB-L1L7LLA Compatible With Samsung Galaxy Core LTE SM-G386W

Best Shopper brand is a registered trademark
Buy with confidence - Brand New
Buy Local, Ships from Ontario - FAST SHIPPING!!

User questions & answers

Question:	Does this work for xcover pro
Answer:	Yes. This assembly comes with camera, ear piece, and home button all assembled. If you want to use finger recognition, you will have to change out your home button with the original apple home button. Unless the home button is from Apple, it will not have Finger recognition software.

HAIJUN Mobile Phone Replacement Parts Fingerprint Sensor Flex Cable for Oppo F3(Black) Flex Cable (Color : White)

Check latest price

Product description

All tested ,100% work ! 100% Satisfaction Guaranteed

1. High quality fingerprint sensor flex cable for OPPO F3.

2. Replace your broken or unusable item with a new one.

3. Each item has been checked and in good condition before shipping.

4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Complete assembly Replacement Parts.
Replace your broken, damaged, cracked, unusable one
This listing is for a Brand New Spare Parts
Professional installation is required for this Repair Parts
Fingerprint Sensor Flex Cable for OPPO F3(Black)

HAIJUN Mobile Phone Replacement Parts Speaker Ringer Buzzer for OnePlus 6T Flex Cable

Check latest price

Product description

All tested ,100% work ! 100% Satisfaction Guaranteed

1. Speaker ringer buzzer for OnePlus 6T

2. Replace your broken or unusable one with a new one

3. Each item has been checked and in good condition before shipping

4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Complete assembly Replacement Parts.
Replace your broken, damaged, cracked, unusable one
This listing is for a Brand New Spare Parts
Professional installation is required for this Repair Parts

HAIJUN Mobile Phone Replacement Parts SIM Card Tray for Google Nexus 6P (Black) Flex Cable (Color : Black)

Check latest price

Product description

All tested ,100% work ! 100% Satisfaction Guaranteed

1. High quality SIM card tray for Google Nexus 6P.

2. Replace your broken or unworkable item with a new one

3. Each item has been checked and in good condition before shipping.

4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.