12 best iphone6 plus car mounts

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

Product description

The iOttie Easy One Touch 2 provides a safe, versatile and highly functional smartphone mounting solution. Like its predecessors, the One Touch Universal & the One Touch XL, our new One Touch 2 is packed with standard features like the iOttie patented one touch locking feature as well as the iOttie super sticky gel pad. The iOttie One Touch 2 also includes new features as well. It includes a new two-step locking lever which ensures your mount can be used on different surfaces. The first locking position can be used for flat, smooth surfaces, while the second locking position can be used on curvy textured surfaces that may require more grip. The One Touch 2 also offers a telescopic arm which extends up to 2 additional inches to provide you with even more viewing options when using your mount. The One Touch 2 also provides a new sliding bottom foot. Our redesigned bottom foot ensures that there is no interference with your devices bottom ports. The stickiness of the suction cup is infinite, just rinse with warm water and let air dry, restoring the gel pad to like new condition. No matter if your phone is protected by a skin or a case, the iOttie Easy One Touch 2 Car Mount grips securely onto your device so you can drive with confidence. Mount Smart. Drive Smarter!



Please Note:  iOttie is not responsible for any potential damage to textured dashboards that may be caused by our products. If you have a concern about dashboard damage we do recommend mounting the car mount on your windshield (state law permitting). You may also consider our Air Vent or CD Slot Car Mounts.

• Easy one touch mounting system locks and releases the device with just a push of a finger; Super sticky gel pad sticks securely to most surfaces, yet is still easily removable (please note, most likely will not work on leather/ vinyl dashboards)
• Compatible Device: iPhone X/XR/X Max/XS Max/XS/8/8 Plus/7/7 Plus/6/6 Plus/5s/5c/5/4S; Samsung Galaxy S9/S9 Plus/S8 Plus/S8 Edge/S7/S6/S5/S4/S3/S2/Note 8/5/4/3/2; HTC One M8; Google Nexus 5/4; LG G2/G3. Please note: This product opens to 3.2 inches in width, which makes it compatible with the iPhone 6 Plus which is 3.09 inches in width
• New telescopic arm adds 2 inches to allow for closer device viewing. The stickiness of the suction cup is infinite just rinse with warm water and air dry and this will restore the gel pad to like new condition
• Now includes the new iOttie Sticky Gel Dashboard Pad which allows more flexibility as well as a smooth surface on textured and curved surfaces
• Adjustable bottom foot: Bottom foot can move left or right to allow the ability to charge your device

User questions & answers

Question:	Will this hold an HTC One M8 with case? (3" x
Answer:	It does hold HTC phones, not sure if it can take it with case. you may refer to manufacturer link.http://www.iottie.com/Product/ProductDetail.aspx?ProductID=1073&ProductType=321
Question:	What is the diameter of the gel pad
Answer:	I just went out to my car and measured the gel pad with a digital caliper. The installed diameter is 2.5".
Question:	I have an iPhone 6 plus with a protective case that makes the width 3.25 inches. Since this page indicated the width is 3.2 inches, can I use it
Answer:	Yes it can support a device up to 3.4 inches wide. The box has an image that shows a device between 2 and 3.4 inches fits.
Question:	Does it rotate for a landscape view
Answer:	Yes, very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.

Product features

iOttie Easy One Touch 2 Car and Desk Mount

The iOttie Easy One Touch 2 provides a safe, versatile and highly functional smartphone mounting solution. Like its predecessors, the Easy One Touch and Easy One Touch XL, our Easy One Touch 2 is packed with standard features. This includes the iOttie patented one touch locking feature as well as the iOttie super sticky gel pad.

Adjustable Viewing Angles

The arm can pivot up or down for a variety of angles and optimal viewing capabilities.

Compatibility

The iOttie Easy One Touch 2 fits mobile devices 2.3 inches to 3.2 inches in width. Our redesigned bottom foot ensures that there is no interference with your devices bottom ports.

Telescopic Arm

The Easy One Touch 2 is equipped with a telescopic arm to give users better viewing angles when using their device.

Dashboard Pad

iOttie offers a optional but recommended accessory, a separate dashboard pad to support improved mounting on textured and curved surfaces. It give the user more mounting location options than ever before.

Easy One Touch 2 Car and Desk Mount

A certified best seller, the iOttie Easy One Touch 2, provides a safe, versatile and highly functional smartphone mounting solution. Simply, mount it with the one touch locking feature and you are ready to safely drive to your destination.

iON Wireless Qi Charging Case for iPhone 6s/6

The iON Wireless Case will not only protect the iPhone 6/6s, but will allow it to charge wirelessly with Qi standard devices. The design and components provide a sleek and compact solution with the dependability of MFI components.

Easy One Touch Wireless Qi Charging Car Mount

With the Easy One Touch Wireless you no longer need to get tangled up in locating cords or cables within your vehicle anymore.Convenience and style go hand in hand with this fully functional Qi Wireless Charging Mount.

iTap Magnetic Vent Mount

The iTap Magnetic Vent Mount is more compact than most vent mounts in the market which provides for a cleaner, organized look. Simply attach the magnetic plate to your smartphone, mount with one hand and go.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• 👍 AUTO LOCK & JUST SLIDE IN AND GO: Just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without close onto the side buttons. Easy to insert and remove your phone with one hand.
• 👍 ALL-ROUND PROTECTION, NO MORE FALL : Auto-lock clamp arms can auto adjust to hold phone more firmly without fears of bumps. Special curve of arms fit phone better. Double-layer branch structure to reinforce the steadiness. The phone was all-round protected by silicone rubber on the inside clamps. NOTE:MAXIMUM THICKNESS OF DEVICE IS 14MM-0.5IN.
• 👍 UPGRADED AIR VENT CLAMP: This car vent phone holder mount is designed as "hook shape" and form "Three grasp points" which can vise the outlet blades tightly. This car phone holder has “Three Grasp Points” with shockproof rubber, which could hold the phone steadier than others, it solving the market's common problem of being easy to fall off from the vent over time. NOTE: THE LENGTH OF CLAMP BETWEEN 0.41-0.98IN. THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT.
• 👍 UNIVERSAL COMPATIBILITY: This universal car cell phone holder will firmly hold all the smart phones (4.7-7in) even with thick case (0-0.12inch) compatible with iPhone 12 pro max/ 11 pro max/XR/X/8/7/6/5, Note 20 10/ Galaxy S10+/ S9/ S8 /S7 /S6 and more.NOTE:WE RECOMMEND USING THE SMALLER PHONE(＜4.7inch) WITH PHONE CASE
• 👍 NO BLOCK VENT & SAFER DRIVING: With this car vent phone mount mounted on the air vent and its mini size - only 1/3 volume of traditional cell phone car mount after compacting, Besides, it won't block the air vent so that the air can flow better. You can have a wider sight and adjust this gravity car phone holder up/down or left/right. NOTE: THE HORIZONTAL MODE IS NOT SUPPORTED.

Product features

Just Slide In And Go

Just slide in your phone, car phone holder mount clamps the phone automatically by gravity; Take out your phone by sliding it upward without close onto the side buttons.

Auto Clamping Arms

Upgraded arms can adjustable so that it can hold phone firmly and securely when the car is bumping. Move with your phone and provide more stabilty

Widened Pedestal

The bottom shelf is wider and there is more space so that you can attach a charging cable and won't block audio port.

Thicker Case Friendly

This car phone holder mount which can fit the phone with thicker case within 0.5inch/14mm. You no longer need to remove the case to put a smartphone in a holder. Compatiible with Crystal case cover; Liquid silicone case; Bumper case; Otterbox defender (without the belt-clip holster)

Note: The wallet case does not suit it.

Adjustable Vent Clip

The air vent clip is also adjustable to change its length to match the air vent blades tightly. So that it can fit different types air vent.

The length of the clamp between 10.5mm - 25 mm (0.41in 0.98in)

Ultra Stable Three Grasp Points

This Auto Lock phone car vent mount is designed as "hook shape" and form "Three grasp points" which can vise the outlet blades tightly and firmly.

Assistant clip

The assistant clip could help to hold the vent in place and hold vent steadier than others.

Anti-slip Shockproof Rubber

The bottom cover with anti-slip shockproof rubber, which could attach more tightly without scratch of vent

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• 🔝 ULTIMATE PROTECTION: Say goodbye to the easy-scratched plastic panel mount. VICSEED CD slot and air vent car phone mount adds a high-density silicone material with excellent resilience. The phone holder for car is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. Unprecedented design, leaves zero-scratch’s on mobile devices & cars and extends the service life of the auto parts effectively.
• 🆕 2 IN 1 MOUNTING STYLE: Now there is no need to spend time looking a mount that suits your needs on Amazon. This car phone holder can do it all. VICSEED has carefully equipped two chucks for the phone holder. The cell phone holder for car can be installed in the CD slot & air vent. The car mount is suitable for most cars. [ The ergonomic chuck retains enough clearance so you can easily adjust it without worrying about getting your fingers stuck. ]
• 🆕 ULTRA STABLE AND SAFE: When you meet VICSEED, you can leave the worries of your phone falling behind you. The arms are designed to close inward and hold the phone tightly. Your phone will stay safe and sound at all the times. This cell phone holder that will meet your needs once and for all whether that be in a CD slot or air vent.
• 🆕 FULLY ADJUSTABLE: With a 360° rotating ball, the phone can be adjusted to any angle. The CD car phone mount can support one-handed rapid switching between horizontal or vertical screen. Flexible adjustments will prevent the CD player phone mount from blocking vehicle buttons or screens.
• 🌈 EXCELLENT SERVICE & UNIVERSAL: Hope you will be thrilled with the products you purchase from the Vicseed. That’s because we go out of our way to ensure that they’re designed and built to be just what you need. Meanwhile, you will get a 30-day fast refund service and 12-month warranty for each car phone mount. The wide arms and adjustable bottom make the VICSEED hands free phone mount for car suitable for all 4.0" to 7.0" smartphones with thick cases.

User questions & answers

Question:	Does it not fall off the CD port
Answer:	Slides into the CD slot and has a set screw to stabilize it. It has never fallen out for me.
Question:	Will this hold an S20 Ultra in an Otterbox
Answer:	YES. This CD slot phone holder for car works perfectly with S20 Ultra in an Otterbox, the mount feet is adjustable, pull out to feet your phone. Send us a message via Amazon and for the best solution for your car and phone model,click seller name'VICSEED' below the add to cart button on product listing, then click 'Ask a question', please.
Question:	Would the cd mount work on a new iphone 11 promax with a car that is a 2014 lexus es
Answer:	Yes on the iPhone 11 Pro Max. That’s what I have. Not sure in the Lexus but it works with my Volvo
Question:	Will this phone mount holds my phone securely
Answer:	The grips on phone mount have held my wife’s phone securely since last Christmas. There have been no issues with loose fitting.

Product features

VICSEED 2020 Upgrade Ultra Stable Car Phone Holder! ------ Make your life simple!

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• ▶[MILITARY GRADE STURDINESS TEST]: The 2020 enhanced TORRAS cell phone holder for car passed the military-grade sturdiness test, it is sturdier more than 10 x than normal ones. The suction cup can withstand the temperature from -20℃（-4°F) to 95℃/(203°F). It can be reusable. You can stick it on your car dash or windshield. Also, you can use it at home, it can be perfectly stuck on the desktop or wall when you study, video, teaching or listening. Completely hands-free and views-adjustable.
• ▶[EASY&REAL HANDS-FREE]: Release easily with one button, clamp fast with one hand! ▶The cell phone mount holder is suitable for all kinds of mobile phones with brand thick cases, Battery cases, and it is exceptionally sturdy to hold your phone tightly. Like iPhone SE 2020/11/ 11 Pro/11 Pro max /x/ xs max/xr/8 plus/8/7/6s plus, Samsung galaxy s20/s20+/s20 ultra 5G/note 20/10 plus/10/9 plus/9/s10/s9/a10e, Google Pixel 3a/4 XL, LG v20, One Plus and more.
• ▶[4 IN 1 ULTIMATE CAR MOUNT]: Are you not sure which installation method is better for your car? No worries! The 4 in1 car phone holder can be flexible placement! Dashboard & Windshield & Air Vent & Home, all places work perfectly! Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.
• ▶[2020 ENHANCED VENT CLIP]: You can screw the nut to fix the clamp freely, the tighter you screw, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to lighten the load on the middle one, no damage your car. This is more than 10 times sturdier than ordinary ones. It fits perfectly for your car no matter what the thicker blades vents or vertical ones.
• ▶[WHAT YOU GET]: With the car holder for cell phone, you can a package including 1 enhanced suction cup, 1 sticky pad, 1 strong air vent clip, 1 support card, and 1 user manual. You will enjoy our worry-free 36-month experience and 12-hour kindly customer response! Note: The sticky pad just can be used once, please think twice to stick it.

Product features

TORRAS Cell Phone Holder for Car Dashboard & Windshield & Air Vent Car Phone Mount

WASH IT, THEN REUSE

Simply wash and dry naturally, then stick it to a new place, suction is as strong as before! At home, you can stick it on your desk or wall of the kitchen to assist you to study, cooking, video or listen to music/news.

2020 STRONGER SUCTION CUP

The 2021 latest upgraded suction cup can resist up to extreme weather: (-4°F/-20 ° C- 203 °F/95 ° C), and bear 45 pounds easily! It is stronger 10 x than any other ordinary ones. Also, we add a sticky pad to make it stick more firmly!

LOCK YOUR PHONE FIRMLY

The cell phone holder is so TIGHT that your phone never falls off! And the depth of the side arm is up to 0.84". All cases and phone rings, battery cases are compatible well. Also, it is perfect for the bump road, off-road or sharp turn.

You Can Also Use It at Home for...

Q1: How sticky is this suction cup?

A1: This phone mount suction cup is one of the most sticky on the market. We add another layer of premium glue on the surface of the suction cup to enhance its viscosity. Temperature resistance: -4°F(-20 ° c) - 203 °F(95 ° c). It can be used even in the heat of Florida. If your holder does not stick, it is probably defective, you can apply for a replacement at any time, the original will not return back.

Q2: Does the bottom of the car cell phone holder can be adjusted?

A2: Definitely! You can adjust the length according to the size of your phone. Never block your phone camera.

Q3: Does it need a large flat space to stick?

A3: No, this phone holder suction cup has a diameter of 2.56in /65mm, slightly larger than the width of a credit card.

Q4: Does it stick to the leather dash or texture?

A4: No, both these materials are not friendly to the suction cup.

Q5: Does this clip work with vertical blades of the air vent?

A5: Sure! The phone holder fits most standard air vents and both horizontal & vertical vent blades, but not for circular vents. Don't worry about your car model, as long as the vent type meets.

Q6: Why use swivel clips instead of "I" and "II" gears?

A6: Because it would be suitable very well for whatever the thin or thick vent blades. This is the benefit of its flexible clip. You only need to rotate it simply to meet your needs. No worries about damaging the vent blades or the holder falling off.

Q7: Does the cell phone holder work with the latest phone Samsung galaxy s20, note 20/iPhone 12,12 pro,12 pro max, 12 mini?

A7: Of course, this cell phone holder is quite stable for all smartphones! And perfect for 99% cars & phones as you please.

Product description

Why choose Mpow cup cell phone holder for your car?

1.The most effortless Installation

2.No more stains on dashboard and windshield

3.No magnets and metal plate interference

4.No obscuring driving line of sight

5.Stable in cup holder all the way

6.Broadly compatible with most cars



Long flexible arm offers optimum view You can adjust the height and distance between you and phone screen by 5 inches arm and 360° rotatable ball joint.



Multiple Device Compatibility(works with thin phone cases) iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7… Galaxy S10, Galaxy S9，Galaxy S8，Galaxy S7，Galaxy Note 9，Galaxy Note 8，Galaxy J7… Pixel 3 XL, Pixel 3, Pixel 2 XL, Pixel 2, Nexus 6P, Nexus 6, Nexus 5, Nexus 4… Smartphones with screen size between 4.7-6.8inches.

• The Easiest Installation No more stains on your dashboard and windshield. Let’s have the easiest installation and removal of a car phone mount. No tools and gadgets required. You just put the base into cup holder and remove at any time without any damage of your car.
• Adjustable Cup Base: The cup holder’s base is easily adjustable, having a wide compatible size with most cars. The maximum diameter of the cup base is 4.05 inches and the minimum 2.6 inches. Please measure the diameter of the cup holder bottom in your car to ensure compatibility before purchase
• Secure and Steady Fit: There are anti-skid rubber frictions both applied on the phone cradle and the mount base to keep your phone secure and steady in place even over rough and bumpy road.
• Flexible Angle Positioning: The fully adjustable long arm and rotation allows you to easily raise your phone to 5 inches high and tilt it forward or rearward in any direction. You will have an ultimate position choice for better driving experience.
• Widely Applicable Clamp: The phone cradle has adjustable brackets expand to fit for most smartphones with screen sizes between 4.7-6.8 inches as well as phones with thin cases less than 4mm, Such as: iPhone 11 Pro Max/XS Max/XR/X/8/7/6 Plus etc

User questions & answers

Question:	Is this compatible with Samsung s10 plus phone
Answer:	I have a Samsung 3 and it fits. The slide on the side looks like it adjusts to different sizes. A button on back releases it. Has a snug fit. Love it.
Question:	Will this hole an iPhone 6sp in an otter box case
Answer:	I'm not sure that keeping the outside case on your phone would work. If you're referring to the top part that holds the phone, the clamps extend to just under 4"...3 and 7/8th. That measurement should be your answer.
Question:	Where is this manufactured
Answer:	Made in China
Question:	Will this work for my LG 7 thinQ
Answer:	Its very adjustable, compensating for height and width. You have to read the description details for exact measurements or contact the seller.

Product features

The key features of a cup cell phone holder

• No more stains on dashboard and windshield
• The most effortless Installation
• No magnets and metal plate interference
• No obscuring line of sight

Friction-Fit Clamp

Anti-skid rubber pads are applied to the clamp to prevent smartphones from falling out and scratches. With the firm and secure grip, your cell phone will stay still even over bumpy road and sharp turns.

Phone Case Friendly

Mpow phone holder is not only compatible with phones of multiple sizes, but also accommodates to thin phone case less than 4mm. With the dual protection of phone case and secure clamp, your phone will be safe and secure.

Easy Access to Charging Slot

The width between two supporting feet is enough for a charging cable, providing accessible space for you to charge your phone on the road or use home button effortlessly. The brackets and supporting will not block the screen at all.

Step1

Unscrewing the nut and covering the ball pivot with it

Step2

Push the ball pivot into the slot

Step3

Screwing up the nut

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• Worry Free Driving - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
• Easy To Install - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
• Versatile Angles - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
• Powerful Suction - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
• What You Get - Limited One Year Warranty from Maxboost ensures maximum protection for your Maxboost Extendable Arm Car Mount.

Product features

UNIVERSAL COMPATIBILITY

The one-touch side button for a quick release, while the retractable arms for an snug-fit.

EXTRA STRONG

Multi-knobs securely holds your smartphone to your dashboard and windshield.

ADJUSTABLE VIEWING ANGLES

Adjustable arm extends and contracts to provide user with a comfortable mobile experience.

• ONE SLIDE TO MOUNT PHONE IN PLACE: Enjoy unbeatable one-hand operation with VICSEED car phone mount. It's easy to slide the phone in/out once set the mount width to fit your phone size, no longer requires open and squeeze clamp arms every time, super easy and fast to take phone out and put it back in.
• HOLD YOUR PHONE STEADILY: Upgraded air vent phone holder features double strengthening mechanism, stable twist-locking and extra supporting plates attach onto car air vent easy and sturdy. On the other hand, innovative quadrilateral clamp arms steadily embrace phone from 3 sides, phone removes only by lifting it up when in need.
• FREELY ADJUSTABLE VIEWS: VICSEED iPhone car mount features a 360-degree rotating ball, you can easily position the angle of the car phone mount to different angles, see the phone display clearly. This air vent phone holder offers the best install position, easy to get comfortable road sightlines rather than distracted by bulky phone holder for car, ensure driving security.
• UNIVERSAL COMPATIBILITY: [This car phone holder works wonderfully with a slim case. NOT fit for a thick case such as Otter and wallet cases] The adjustable cradle widely compatible with devices from 4.5 to 6.8 inches, including iPhone 12 Pro Max/ 12 Pro/ 12/ 12 Mini/ SE 2020/ 11 Pro Max/ 11 Pro/ 11/ Xs Max/ Xs/ Xr/ X/ 8 7 6s 6 Plus. Also compatible with Samsung Galaxy Note 20/ Note 10/ Note 10+/ S20/ S20 Plus/ S10/ S10e/ S10+/ S9/ S8/ S7/ LG Google etc.
• SOLID QUALITY WITH EXCELLENT SERVICE: Luxurious elegant look with shiny finish. This car cell phone mount made of tenacity plastic and solid aluminum alloy, the result is a lightweight, portable and durable car phone holder like this. Please buy with confidence, you will get a 30-day fast refund service and 12-month warranty for each car phone mount. VICSEED 200+ smile-invoking customer support members should surely help to warm your heart and bring joy and happiness into your life.

Product features

KEY FEATURES:

—Luxurious Elegant Design With Your In Mind—

• REVOLUTIONARY CONVENIENCE - No repeated squeezing/releasing after first use, one hand operation, one second to put phone in/take it out!
• BEST IN CLASS STABILITY- Four sides embracing protection, maintain a stable viewing angle, avoid phone falls off on bumpy roads.
• 2020 UPGRADED VENT CLIP - Fit with most type of car air vents, thick silicone pads to prevent your love car vents from Scratches.
• STYLISH APPEARANCE - Sleek and minimalist design looks good and different than all of others, great gift idea for everyone.
• ROTATION FUNCTION - Provides perfect screen view angle to see the phone screen clearly and ensure driving safety.
• UNMATCHED PORTABILITY - Lightweight and compact, easy to carry for rental cars and travel.

Steady Embracing Design

Stable quadrilateral embracing cradle holds your phone steady, even on bumpy roads, sharpe turns or brakes.

Rotation function

With a 360 degree rotating ball on the backside, you can get multi-angles to see the phone screen clearly.

Reserved charging port

It is super easy to plug in the cable and charge when using navigation apps.

The Third Generation —— Extreme Stable Air Vent Clip, Your Phone Will Never Fall Off.

VICSEED is the first to invent this air vent clip version, with three innovative designs, it works perfectly with horizontal and vertical vents.

Warm Tips: This car phone mount uses a 0.9''L × 0.7''W vent clip to insert and clip onto your car air vent vanes.

Adjustable width design universally compatible with:

• iPhone 12/ 12 Mini/ 12 Pro/ 12 Pro Max/ SE 2020/ 11 Pro Max/ 11 Pro/ 11/ Xs Max/ Xs/ Xr/ X/ 8/ 8 Plus/ 7/ 7 Plus/ 6s Plus/ 6s/ 6 Plus/ 6
• Samsung Galaxy Note 20/ 20+/ 10/ 10+ S20 Plus/ S20/ S10 Plus/ S10 Plus/ S10e / S10 / S9 / S8 / S7/ S6
• LG, Google, Moto, OnePlus etc.
• Not fit with: Thick cases such as Otterbox, Wallet/Battery case, Ring holders.

— WAHT'S IN BOX —

• 2020 Upgraded Vent Clip
• Car Phone Mount
• User Guide

— VICSEED CARE — Customer satisfacation is our pursuit.

We always stand behind out products, if you have any issues when using this product, kindly send us messages to get the best solution.