13 best i phone car mounts

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• Extremely Powerful Suction: Through a process of experimentation and innovation, we used top-of-the-line silicone to create a seriously strong suction cup that’s 4x stronger than previous models, so as to lock the phone holder into place even as you drive on tough, bumpy terrain – also comes with a gel pad to firmly grip onto rough surfaces.
• Maximum Compatibility: Truly universal phone holder provides a perfectly secure hold for all cell phones including iPhone 12 Series/ 11 Series/ X Series, Samsung Galaxy 20/10 Series/Note 20/10 Series, Google Pixel and other smartphones.
• Fully Adjustable Viewing Angle: Steer the phone holder into the optimum viewing spot thanks to the extendable telescopic arm, and position your phone horizontally, vertically, or at virtually any angle with the 360-degree ball joint in order to easily see your GPS navigation as you drive.
• Strong & Steady Hold: Exclusive tightening mechanism works in tandem with the thickened silicone clamps and hook to provide the ultimate cement-like grip on your phone, ensuring the safety and stability of your device – even as you drive along bumpy roads.
• 3-in-1 Cell Phone Holder: Incredibly versatile phone mounting solution, made from premium airliner PTFE materials, is easy to anchor to your windshield, dashboard, or air vent, plus it fits perfectly in most cars, pickup trucks, SUVs, taxis, and is an indispensable ally for Uber and Lyft drivers.

User questions & answers

Question:	Would this hold a LG Stylo
Answer:	Yes, I believe so. It's made to expand and contract around the phone. I have an LG V40 ThinQ, which is a fairly large phone. Hope this helps!!! I love mine!!! It's awesome!!!
Question:	Is it better to mount this on the window to avoid melting during hot days
Answer:	Do not worried about the hot days. It is the best suction cup I have ever seen. Mine works well in the whole Summer days by mounting it on the window.
Question:	How well does the suction cup adhere to the – surface that isn’t really smooth it’s got a pattern to it so to speak
Answer:	It comes with a plastic piece with some sticky strips you can put them on the dash, and then the phone holder on that!
Question:	Do you have to use the adhesive to put it on your windshield
Answer:	No. The suction cup is quite strong.

Product features

Extra-Strong Suction

Thickened 3m gel suction cup provides an ultra-secure grip on either your windshield or dashboard to keep your phone stable and steady while you drive – even on tough terrain. (For best results, use with the included dashboard pad.)

Complete Phone Protection

Premium silicone helps keep your device pristine and protected by preventing any scratches or bumps, it also ensures a strong hold that keeps your smartphone securely docked in place.

Phone Case Friendly

Universal case-compatible holder is built to accommodate even the largest of phone cases, up to 15mm thick, so you can leave your phone in its case for convenience.

Full 360°Rotation

Designed with a swivel ball joint to provide a full 360-degree rotation to smoothly pivot and position your smartphone horizontally, vertically, or at virtually any angle for optimal viewing and a safe driving experience.

Superior Stability

Constructed upon the principle of triangular stability together with high-quality materials to create a remarkably sturdy perch that keeps your smartphone upright and in a fixed position – even on bumpy roads.

2021 Innovative Clip

After thorough and detailed analysis, our team have produced the perfect clip which tightly latches onto your car’s air vent to keep your phone cemented in place on all terrains.

Space for Charging

Cleverly structured with an open port under the holder, you can access your phone’s charging port while it’s securely mounted to navigate and charge simultaneously.

• Upgraded Vent Clip: Features a stronger, larger vent clip and an innovative support frame to provide extra support, it can hold your phone securely on an air vent in your car
• Upgraded Phone Cradle: Design with a larger cradle to keep your phone stable in place. With the instant release button, you can push the phone cradle arms in to secure your phone and press the button to release
• Ideal Viewing Angle: A 360° rotating and pivoting ball joint allows you to adjust and quickly switch between portrait and landscape view
• Adaptable Attachment: Features a 3-levels locking knob to easily and firmly fix the air vent mounting grip on your car air vent
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold my Galaxy S
Answer:	It can be used on any phone smaller than 6.5 inches, so it can definitely be used on your Galaxy S8
Question:	How many magnetic plates come with the product
Answer:	There are two magnetic plates.
Question:	will this work with a small phone like the original iPhone SE, or new iPhone 12 mini
Answer:	It worked . ihave iphone 12
Question:	Can I remove placement and place somewhere else
Answer:	Yes, you can remove the holder to wherever you want to set. The viscose of the pedestal could be reused after you wash it by warm water.

Product features

AUKEY Car Phone Mount

• Upgraded Stronger Air Vent Hook Clip, flexible fit to attach to thicker or thinner air vents.
• Firmly holds your smartphone or GPS.
• 360-degree rotation for the ideal viewing angle.
• One-button phone release.
• High-quality materials and finish.

The phone cradle release button has been relocated to the top at the back for easier access and smoother phone retrieval. The phone cradle has also been improved to hold your phone firmly even on the most bumpy roads.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint.

Upgraded Stronger Air Vent Hook Clip

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Adjustable Phone Rest

Extends to fit bigger phones. Four positions to choose from.

Keep Your Case On

Fits regular phone cases too.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Upgraded Mount

With a larger cradle and stronger grip, it can hold your phone firmly in place even for a big one.

Step 1

Flip the grip release knob to the widest air vent mounting grip gap. Clip the mount on your car’s air vent and then flip the grip release knob to to lock.

Step 2

Press the phone cradle release button and adjust the phone rest so that your phone is positioned at the right height in the mount.

Step 3 Press the BACK EDGE

Press the BACK EDGE of the cradle arm tips to push the phone cradle arms back in, so they grip your phone securely.

• [4 in 1 Cell Phone Holder]: Multifunctionale functions car phone holder can be mounted on dashboard windshield air vent or desk firmly. One suction cell phone holder or air vent Phone Holder feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Super Viscous Suction Cup]: The suction cup phone holder uses 2-level locking mechanism, strong suction force, only need to rinse with water to restore the stickiness. On a bumpy road, turning on the road, braking or driving, the mobile phone holder can also be fixed to the dashboard Windshield and desktop.
• [Universal Cell Phone Holder]: Humixx car phone mount compatible with most phones between 4" and 7", such as iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ Samsung Galaxy Note S21/S21+/ S21 Ultra/ 20/ S20 Ultra/ S20/ S20+/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360°Rotations & Adjustable-Arm]: Cell phone holder swivel ball head ensures 360° free rotations and arm can extend from 4.6in to 6.6in for optimal viewing angle. Prevent from blocking your view while driving, so you can ensure stability and safe driving.
• [All-Around Protection]: Phone mount uses an innovative shock-proof texture made of PU material and triangular stability. And phone holder also equipped with non-slip silicone pads to effectively prevent sliding and abrasion of the phone.

Product features

Air Vent Phone Holder

The accessory includes a vent clip that gives you more options for installing your phone. We promise to provide free lifetime replacement for suction cup & ventilation clip accessories.

Dashboard phone holder for car

The extra dashboard pad can provides smooth surface. So the car holder can stay more firmly and securely. You can also drive more safely off-road or on bumpy roads.

Mobile phone holder windshield

You can also attach our suction cup to the windshield. We use the latest material from Bayer, which not only guarantees strong adhesion, but also leaves no traces when removed.

Shock-absorbing PU Material

The shiny diamond design like brickwork is not only shock absorbing and non-slip, it can also decorate your car.

17.5 mm charging port

You can freely connect the charging cable through this opening. Therefore, loading and navigation can be carried out simultaneously.

The latest ventilation clip

You can freely adjust it and install it in the ventilation slot. Rubber coating protects the car from scratches

Powerful suction cup

The suction cup is double-locked and can be reused. Wash with warm water and dry to restore viscosity

Supports almost all mobile phones and cars

• iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus
• Samsung Galaxy Note 20/ S20 Ultra/ S20/ S20+/ M30s/ A50/ S10/ S10e/ A51/ A40/ S9/ S8/ Note10/ Note 9/ Note 8
• HUAWEI P40 lite/ P40/ P40 Pro/ P30/ P30 Pro/ P30 lite/ Mate 20/ Mate 20 Pro/ P20 Lite / P20 Pro
• Google Pixel 4 / 4xl / 3 / 3xl
• Nokia / LG/ HONOR/ One Plus/ HTC etc. Perfect for all smartphones
• Suitable for most cars like VW Golf, Polo, Tiguan, Passat. Mercedes, BMW, Audi, Ford, Skoda etc

• WIDER COMPATIBILITY: New larger Easy One Touch button and cradle allows for wider device & case compatibility.
• MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located on the bottom foot
• TELESCOPIC ARM: The improved telescopic arm now extends from 5” to 8” (as opposed to the Easy One Touch 4 which only extended to 6.5”) and pivots 225 degrees. This enables a myriad of customized viewing angles while you’re on the road.
• REDESIGNED BOTTOM FOOT: Easier to secure and adjust; simply squeeze the spring button and pull down.
• ENHANCED SUCTION CUP: Redesigned suction cup with an improved sticky gel formula that provides a stronger, lasting hold.

User questions & answers

Question:	Will the adhesive patch damage a leather dashboard
Answer:	I would assume so but it isn't very adhesive honestly I have to wet the sticky part for it to stick to my dash
Question:	Will this cradle hold iphone 11 pro? I have older version for my iPhone 6+, it's still functional & I luv it but my 11 pro does not fit it
Answer:	It fits my iPhone 12 Pro Max, easily
Question:	Is it applicable for windshield as well
Answer:	Yeap! I’ve had mine on my windshield since the day I got it and no issues at all. It’s very sturdy and hardly moves even on bumpy terrain. Hope this helps!
Question:	How wide is the cradle? (How wide can a phone be before it won't fit
Answer:	I used this for my iPhone 8 Plus with an Otterbox Defender on it (not a slim combo) and it was plenty wide enough.

Product features

Telescopic Arm

Arm pivots 225 degrees for custom viewing angles on the road

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying

Mount Foot & Magnetic Organizer

New Foot easily adjust to standard & large smartphones, and helps keep cords organized

What's Included

Includes Mount, Dashboard Pad and Cable Tag

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• 【2020 Latest Design-Never Fall Off】Miracase car phone mount adopts 2020 latest fall-proof locking design which holds your phone securely to the vent. The clip hook will catch one of the car air vent blades. The spring-clip plate and the tightening nut will provide absolute fixation. This car phone holder has stable trapezoid-structure clamps with thickened shockproof sponge and rubber, which could hold the phone steadier than others. It will never fall out like other products no matter how bumpy
• 【Universal Compatibility】Miracase car cell phone holder has an adjustable mount which makes it widely compatible with smartphones or electronic devices from 4.5 to 6.5 inches(width size from 2.1-4.05 inch),such as iPhone 11 Pro Max / 11 Pro / 11 / XS MAX /XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. Also compatible with Samsung Galaxy Note 10 / Note 10+ /S10/S10+/S9 / S8 / S8+ / S7 / S7 Edge / LG Google etc.
• 【360 Degree Adjustable View Angle】The 360-degree rotatable head will provide you with the best viewing angle, so you could see the phone screen clearly and keep secure driving rather than limited by view angle or unwieldy phone holder for car. You can place your phone in any orientation(horizontal, vertical and more), it is easy to ensure driving security with this handsfree air vent phone holder for car. Just enjoy the best driving experience.
• 【Single-handed Operation】With quick-release button and adjustable clamp arms, Miracase car air vent phone holder makes it very easy to insert and remove your phone with a single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging.

Product features

Miracase Car Phone Mount-2021 Upgraded Version

Miracase Phone Holder for Car

2021 Upgraded Vent Clips:

Miracase car phone holder adopts 2020 latest design, it will never fall off even on bumpy off-road roads.

Great Choice for Decent Present:

Unique design inspiration makes it stand out,it's a great holiday gift for family and friends.

Installation Instructions

1. Unscrew the screw nut 1, place it onto the ball head.
2. Insert the ball head into the socket of clamp head until you hear a "click".
3. Tighten the screw nut 1.The tighter the nut, the harder it is to rotate the clamp head.
4. Loosen the screw nut 2 until it attaches to the screw nut 1.
5. Make the clip hook downward and pull open the clip plate,push the hook into the air vent grille to catch a blade,then release the spring clip plate to make it fix to the air vent.
6. Make sure the product is already installed stably,then tighten the screw nut 2.Installation complete!!

Note:

• Don't install the product on the blade at the top or bottom.
• Remember to never text while driving.

• Super Strong Magnet Power Car Phone Holder Mount: VICSEED magnetic phone car mount is mini size, but the magnetic car mount comes with extremely strong Rubidium Magnet N52, providing strong magnet suction power. It can hold big phones steadily. Meanwhile, the closed magnetic field would not affect the phone signal. Totally free your hands and keep safe when driving. VICSEED magnet mount can not hold iPhone 12 series phones directly, adhere the metal plate on phone first.
• Super Easy Installation Cell Phone Holder for Car: The phone magnet for car vent phone holder is without cradles, brackets, clamps gel or nut. 1 second to install or unload, you can transfer it to any cars easily. Insert this car magnetic phone mount into air vent in 0.5s, put your phone (already with metal sheet) on it in 0.1s. Super easy to use, save plenty of time.
• 360° Rotation Magnetic Phone Car Mount: Super flexible phone vent holder, providing 360° optional angles. Help you use GPS or smart phone with more comfortable viewing angles.
• Universal Compatibility Car Vent Phone Mount: Unlimited in the size of phone, this magnetic cell phone holder for car is compatible with all smartphones, GPS, with thick cases. Compatible with iPhone SE / 11 / 11 Pro / 11 Pro Max / XS MAX / XS / XR / X / 8 / 8Plus / 7 / 7Plus / 6 6s Plus and Samsung Galaxy Note20/ S20 / S20+ / S20 Ultra 5G / Note10 / Note9 / Note 8 / S10 / S9 / S9 Plus / S8 / S8+ / S7 / S7 Edge / LG, Google, Nexus.
• Reliable Compact Design Phone Car Holder: VICSEED car phone holder mount is made of aluminum alloy and liquid silicone. This car phone mount is compact small, and exquisite, space-saving, blend in with your car. The reinforced dual-sized claw allows this car holder fit with most of air vent. The rubberized exterior increase grip power and protect air vent from scratching. Hold your mobile phone firmly without causing any damage.

Product features

Installation Steps:

1. Clean the back shell of the cellphone, apply the transparent adhesive tape to a proper place on the back of the phone or the phone case.

2. Uncover the protection film of the magnetic patch.

3. Paste the circular steel plate in the area of the transparent adhesive tape on the back of the phone, appropriately push hard after pasting well.

4. Clamp the car mount holder on the air vent. Then put the cellphone with circular steel plate on the car mount holder then the installation is completed.

Scientifically closed magnet field, would not interfere the phone signal or damage your device.

If you use wireless charging function, please put the metal plate on the case, and then take off the case while using wireless charging function.

• 【Expandable & Durable Base】Easy tightening & loosening mechanism this universal car phone mount will securely lock in your cup holder. Twist the screw on the base clockwise to expand the base and counter-clockwise to shrink the base. The stretchable range of the base is from 2.7" to 3.4" and up to 4.2" when put on the 3 included pads, which make this phone holder suitable for most automobiles with cup holder. ( NOTE: Please carefully compare the size of your car cup holder before purchase)
• 【Universal Compatibility】Suitable for all types of 2.2” - 3.8” wide devices. With a one-press release button on the back, the clamp will automatically open when you press the button and you can reduce its width by manually press the expanded grips on both sides of the clamp(Note: Please do not pull the two grips to open the clamp by your hands directly). Compatible with iPhone 11 Pro/XS Mas/XR/8/7 Plus/6s Samsung S10/S9 /S8 Plus/S7 Edge/Note9, LG, MOTO, Pixel, Nexus, Nokia, GPS, etc.
• 【Flexible & Durable Gooseneck】Cell phone holder designed with a 4.8-inch long flexible goose-neck. You can regulate the height and angle of the goose-neck as you want，to get the best angle, the best position. The car cup phone mount part can be rotated 360-degree. You could easily adjust the view you want, which can help you achieve safe and comfortable driving through this phone mount.
• 【360 Degree Rotation】 Featuring a ball-shape pivot, the joint part between the phone mount clamp and the goose-neck can be rotated in 360 degrees. In this case, you can adjust the phone mount to any desired angle according to your personal demands, and glance at your cell phone, GPS, or other devices with a safe and comfortable pose.
• 【Easy To Install & Use】 The installation of the car cup cell phone holder is extremely simple without using any tools expect your hands. 360-degree rotation for ideal viewing angle, flexible goose-neck for easy reach, and The open bottom tray design of phone mount allow you to charge your phone.

User questions & answers

Question:	Does an iphone 8 fit
Answer:	Yes. It does
Question:	Does this work for an iPhone 6s
Answer:	It works for all cell phones yo...
Question:	Is this cup holder fit in Toyota Rav
Answer:	Yes
Question:	Does it work for iPhone XR
Answer:	It works for my iPhone 11.

Product features

Adjustable Base

Made of durable plastic, the expandable phone mount base will firmly lock in your cup holder. Slightly twist the hexangular screw colckwise or anti-clockwise, the phone mount base can be expanded or shrank within the range between 2.7" and 3.4" in diameter. When you put the 3 included PVC pads on the base, the width of phone mount base will up to 4.2" and suit for more cars, trucks or other vehicles. ( Note：Please check the size of your own car cup holder slot before purchase.)

360 Degree Rotatable

The ball-shaped pivot supports the phone mount clamp ratate in 360 degree and smoothly. You can put your headphone in the phone mount and set it in horizontal, vertical or any other angles you think is comfortable and wil not disturb your driving.

Wide Compatibility

When you press the button on the back of the phone mount clamp, the grips on both side of the clamp will automatically expand to maximum width. The width range of the phone mount clamp is from 2.2" to 3.8" and it supports the ultral thickness of the devices up to 0.6", which fits the size of most cell-phones, GPS or other digital devices. (Note: Please check the size of your own devices before purchase.)

Anti-slip Clamp

Designed with silicone pads on 3 sides of the clamps, the phone mount clamp can effectively protect your smart phone or other devices from dropping down or scratches.

Hassle-free Chagring

The reserved space that between the two grips on the bottom of the phone mount clamp allows you to plug in your charging cable easily.

Flexible Goose Neck

Since the goose neck is flexible, you can adjust the suitbale distance and height between you and your phone.

Easy to Install

Step 1: Twist counter-clockwise to remove the screw.

Step 2: Put the screw on the ball pivot of goose neck.

Step 3: Push the phone mount into the ball pivot of goose neck.

Step 4: Twist the screw clockwise to tighten up the phone mount and goose neck.

Easy to Install

Step 1: Put the phone mount into your cup holder

Step 2: Twist the screw on the base clockwise to expand the base and counter-clockwise to shrink the base.

Easy to Install

Step 1: Press the button on the back of the phone mount and then the two grips on both sides of the phone mount clamp will expand to the maximum width automatically.

Step 2: Manually press the two grips to minish the width of the clamp and fit your phone on the phone mount.