12 best dashboard phone holders

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

Product description

Can Rotate 360 Degrees Freely; Big Disk, Big Suction, The Phone Will Not Drop; Carefully Selected Base Strong Viscose, Temperature Resistant, Durable, Leaving No Trace; Upgrade The Disk, Anti-Turbulence More Stable, For Bad Road Design, The Turntable Is Equipped With Anti-Skid Rubber, The Car Can Maintain A Fixed Angle In The Vibration; Removing The Metal Plate From The Case Or Back Of The Phone Will Not Interfere With Motion Sensing, Gps Signals Or Internal Sensors, And Will Not Harm The Device Or Affect The Battery. Wipe The Back Of The Phone And Stick The Back Membrane On The Back Of The Phone. Stick The Patch (Primer) On The Middle Of The Phone'S Back Membrane And Press The Patch Tightly. Use It After 3 Hours. Clean The Countertops With A No. 1 Cleaning Cloth, And Then Use A No. 2 Cleaning Cloth To Clean The Countertops. Tear Off The Double-Sided Adhesive Protective Film Of The Base, Install The Base Of The Bracket On The Table That Has Been Cleaned, Press Hard For 20 Seconds, Then Release The Hand, And Use It After 24 Hours To Make It Completely Sticky. Attach The Support To The Magnetic Disc And Install It Successfully

• Design Descriptionfull Width Printing, Single Side Printing
• Wash Just Wipe
• Special Instructions The Mounting Surface Of The Base Should Be Selected As Far As Possible With Grain And Small Radian. Due To Different Measurement Methods, The Error Of This Size Data Within 0.5cm Is A Normal Phenomenon.
• Applicable Scenario Not Only For Cars, But Also For Desks, Kitchens, Bathrooms And Even Showers.
• Material Description Aluminum Alloy Oxidation + Luminous Silica Gel Ring

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

Ganvol Extra Large Non-Slip Car Dashboard Sticky Pad Mat  ( 14 cm x 7 cm), Black

Fed up of non slip pad or gel mat that are not sticky, melt in the hot sun, smell toxic funky odour or leave gooey mess on your dash? If your loved ones ever spent a whole day to remove a gooey mess of terrible "sticky" pad, get them one of these.

 

You will love to have these small and beautiful Ganvol Premium Anti-slip Mats on your car dashboard (even if the dashboard of your car slopes quite a bit). No more hard time getting the "sticky" pad to stick to the dash. They are truly sticky, heat resistant, cold resistant and super elastic! They can even absorb shock and reduce damage to your phone if your car vibrates a lot.

 

Unlike other poor mats being a permanent magnet for dust, the Ganvol anti slip mats can be washed when it gets dirty and leave no residue. Reusable over and over again. The pad can be trimmed to smaller different sizes and spaces.

 

Tips: because it is super sticky, pulling the phone off sometimes brings the pad with it. A quick solution is to get the surface of the side holding the phone a little bit dusty, while the other side retains its original stickiness.

 

Features:

Cross hatched anti-slip gel surface

Holds your phone, keys, glasses or anything securely on your dashboard

Anti-slip mat, clings to your dashboard or center console and clings to anything that's placed on it

No adhesive or magnet needed and can be place in your car, truck, SUV, boat.

Leaves no residue, is reusable and can be washed when it gets dirty

Holds and secures objects in place when driving around curves, going over speed bumps, sudden stops or even when doing off road

Dimension: 14 cm x 7 cm

• Fed up of non slip pad or gel mat that are not sticky, melt in the hot sun, smell toxic funky odour or leave gooey mess on your dash? If your loved ones ever spent a whole day to remove a gooey mess of terrible "sticky" pad, get them one of these.
• You will love to have these small and beautiful Ganvol Premium Anti-slip Mats on your car dashboard (even if the dashboard of your car slopes quite a bit). No more hard time getting the "sticky" pad to stick to the dash. They are truly sticky, heat resistant, cold resistant and super elastic! They can even absorb shock and reduce damage to your phone if your car vibrates a lot.
• Unlike other poor mats being a permanent magnet for dust, the Ganvol anti slip mats can be washed when it gets dirty and leave no residue. Reusable over and over again. The pad can be trimmed to smaller different sizes and spaces.
• Tips: because it is super sticky, pulling the phone off sometimes brings the pad with it. A quick solution is to get the surface of the side holding the phone a little bit dusty, while the other side retains its original stickiness. If the pad is too dusty, wash it under tap water and it will become sticky again.
• Strong adhesion: holds your mobile phone, keys, glasses, headsets, speakers, MP3 player, Laser / Radar detector, bobblehead toy, pens, GPS, cigarettes, lipstick, watches, papers, purse, flashlight, coins, handkerchiefs, tickets, garage door opener or anything securely on your dash board. No adhesive or magnet needed in your car, truck, SUV, boat, RV counter tops, treadmill or gym any more. It clings to your leather / plastic dashboard or center console and clings to anything on it.

User questions & answers

Question:	is it non toxic. Don't want off gassing in high texas heat
Answer:	This has been in my cars all summer over 100°F everyday. I don't notice any odor, obnoxious gasses, fumes. The only issue I've had is dust collecting, and losing the stickiness. Honestly I stopped using them after about a week. Waste of money.
Question:	Will it hold horizontally on dashboard
Answer:	I doubt it maybe with a little angle but not totally horizontal!
Question:	Does this have to be used on a flat surface are can the phone be hanging/vertically so I am able to use my map app
Answer:	I have mine in my car on a slope that is almost vertical. Over time it loses it's ability to cling to the phone in this position as it gets dirty, etc.
Question:	In what country are they made
Answer:	Made in China.

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

• Multiple Purposes: This phone holder can be used on car dashboard, rearview mirror, sun visor . Whether requiring non-blocking the sight when navigating or lying in the seat to watch a film, you can always find a suitable position to mount it.
• 360 Degrees Rotation: It has three axes of rotation which can make it easy to adjust your phone to the best viewing angle and avoid blocking the line of sight. You can even fold it up when not using.
• Stable Without Shaking: It is designed with four clip feet to hold your phone firmly. The base contains a powerful spring that allows it to hold on tightly.
• Detail-Oriented: All stressed parts are designed with soft pads to prevent injury to your car and mobile phone. The attached number stickers can be combined into your phone number, you can paste it on the holder if necessary.
• Broad Compatibility: The clamp arms are designed to be retractable, which can fit for 4 to 7 inches mobile phones.

User questions & answers

Question:	What are the numbers for
Answer:	You can use them to combine your mobile phone number and paste it on the mobile phone bracket (for example, when parking temporarily and causing inconvenience to others, they can easily contact you instead of complaining about your car)
Question:	Will it work in a jku jeep wrangler
Answer:	Yes.
Question:	Why is there a sheet with numbers in the box but no instructions
Answer:	The latest version comes with a set of digital stickers that can be used to combine mobile phone numbers and paste them on the back of the mobile phone bracket, if necessary.
Question:	How do i unclip my phone from the holder
Answer:	There are a pair of protruding buttons in the middle of the holder, and when they are pressed, the four arms will stretch, and you can put or remove the phone.

Product features

360 Degrees Rotation

There are three rotation axes which make the posture of the mobile phone can be adjusted arbitrarily to obtain the best viewing angle.

On Dashboard

When using mobile phone navigation, the dashboard is the best mounting position, you don't have to look down or sideways to see the navigation route.

On Rearview Mirror

If your dashboard is not suitable for mounting, the rearview mirror is also a good choice.

On Sun Visor

When parking for a rest, or the copilot wants to watch movies, you can mount it on the sun visor.

Anti Skid & No Scratch

The anti-skid cushion on the bottom of the base makes the mounting more stable and won't scratch the dashboard.

Anti Skid & No Scratch

There are small anti-skid cushions on the inside of the four clamping arms to prevent the mobile phone from slipping and scratching.

Strong Spring

The strong spring on the base makes the mounting more stable without fear of bumps.

Number Stickers

The attached number stickers can combine the mobile phone number or other numbers you like on the phone holder.

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

Product description

A Surprise Present for Loved Ones The universal car mount is an ideal solution to safeguard the safety of all drivers, and also a thoughtful present for husband/wife, father, friends, or family. This gear will make every drive worry-free and accompany you home safely. It is your right-hand man on the commute, and an ideal companion during the journey. Sleek and Stylish Design This phone mount for car has both functions and aesthetics. Its polished mirror makes the holder look elegant and. The polished mirror surface makes the phone holder for car look elegant and seamlessly match your car Kindly Note 1. Please do not install the suction cup on curved/rough/uneven/dirty surfaces. 2. Before installation, please clean and wipe dry the mounting surface. 3. There is a protective film on the bottom of the suction cup and the small stabilizer, please tear it off before installation. 4. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability. 5. After installation, please push the lever down to lock the suction cup. 6. When removing the suction cup, please unlock the lock lever first, and then pull up the small tab. Do not pull it directly. 7. When summer is approaching or tor the temperature rises, please avoid constant direct exposure to the sun, because this may affect the function of your car mount.

• Stable without Falling: Have you ever encountered the tragedy of a phone falling while driving? Then this car phone holder is exactly what you need. It is not only equipped with a sticky suction cup, but also a stabilizer, which can prevent the phone from wiggling or falling, even over rough roads.
• Hold Smartphones up to 6.9’’: The dashboard car phone holder is made to be universal, and can work with phones with a 4.0~6.9" displays and up to 93mm/3.7in wide, even with a thick case. Compatible with iPhone Series, Galaxy Series, and more smartphones.
• Adjustable Feet & Dual Release Buttons: The feet of the car phone mount holder can be moved up and down to adapt to phones of various sizes, and avoid the phone's side key. With 2 release buttons, you can install or remove the phone with your left or right hand.
• Multiple Installation Options: This car phone mount uses a long and flexible gooseneck that can be bent down and away from your dashboard, so you can view your phone clearly without worrying about blockage to your sight of the road ahead.
• 360° Rotation: The gooseneck can be flexibly bent to get a comfortable viewing angle. Also, the mount features a ball joint that allows a 360-degree rotation, which means you can easily adjust the screen of your phone, either in landscape or portrait mode.

User questions & answers

Question:	Will this fit the iphone 12 pro max with case
Answer:	Yes, and its legs can be pulled down, so it can be compatible with larger phones, but I suggest not too thick phone cases
Question:	Is this easy to install or remove? Will it leave a mark on car
Answer:	The operation of this car phone mount is very simple, just follow the instructions, so far, no marks are left
Question:	Can this hold a Samsung s
Answer:	Yes. we have S10+. The way it is designed, it accommodates all sizes.

Product features

Compatible with Virtually All Smartphones (4.0’’-6.9’’)

•Compatible with iPhone 12 mini / 12 / 12 Pro / 12 Pro Max /SE 2020 / 11 / 11 Pro /11 Pro Max / XS / XR / X /8 Plus / 8 / 7 Plus / 7 / 6 Plus / 6 / 6s Plus / 6s / SE / 5S / 5C / 5;

•Compatible with Galaxy S20 / S20+ / S20 Ultra / S10+ / S10 / S10e / S9+ / S9 / S8 / S8+ / S7 / S7 Edge Plus / S6 / S6 Edge;

•Compatible with Galaxy Note 20 / Note 20 Ultra/ Note 20+/Note 10 / Note 10+/ Note 9 / Note 8 / Note 7 / Note 6 / Note 5 / Note 4 / Note 3

•Compatible with Galaxy A9 / A8 2018 / A7 / A6 / A5 / A4/ A3 2017

•Compatible with Galaxy J7 / J6 / J5 / J4+ / J4 / J3;

•Compatible with Pixel 4XL / 4 / 3XL / 3A XL / 3A / 3 / 2XL / 2 / XL/ Pixel, Nexus / Nexus 7 / 6 / 6P / 5 / 4

•Compatible with Moto One / e5 / e4 / e3 / e2 / g7 / g6 / g5 / g4 / z3 / z2 / z

•Compatible with LG G8 G7 ThinQ/ G6 Plus/ G6/ G5/ G3/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

•Compatible with OnePlus 7T Pro / 7T / 7Pro / 7 / 6T / 6 / 5T / 5 / 3T / 3 / 2 / X / One

•Compatible with HTC/Nokia/Blackberry and more smartphones

Sticky Suction Cup

The high-quality TPU suction cup is enlarged and thickened to enhance its stability and prolong its service life. Also, the suction cup has a layer of sticky gel coating to prevent the formation of air gaps, thereby improving adsorption stability.

100% Protection

The side arms and bottom feet of this car phone holder are designed with silicone pads, through which the phone can be protected from being scratched. More importantly, the tragedy of the phone falling due to bumpy road conditions will not happen.

360° Rotation

Thanks to the ball head design on the back, the car mount can be switched between portrait and landscape orientations, so you can find the most comfortable angle to view and touch the phone while driving, navigating, and answering phone calls.

Step 1. Clean

Find a flat and smooth surface on the dashboard, clean and dry the surface with the cloth.

Step 2. Tear off

Tear off the protective film on the suction cup and stabilizer, and attach them securely to the dashboard.

Step 3. Lock

Push the lever down to lock the suction cup, press and hold the stabilizer for 10s to ensure that it is firmly attached.

Remove

To remove the suction cup, simply unlock the lock lever and pull up the small tab slowly. Note: Please do not pull the mount directly.

• ✅Super Compatibility: This car mount universally fits mobile phone from 3" to 7", like iphone Xs, Xs Max, XR, iphone X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 5S, SE, Galaxy Note 8, S8 Plus, S8, S7 Edge, LG K20 V, GPS device like Garmin etc.
• ✅STABILITY: Triple reinforcement on dashboard, large silica gel base, plus a circle of adhesive silicone film and a suction cup, make the phone holder grip firmly on your car.
• ✅SECURITY: Car holder made of high quality spring, as well as two ends of clamping go with non-skip silicone, make it hold the phone securely and won’t slide or fly out even taking a sharp turn, sudden stop or accelerate.
• ✅MOBILITY: Sticky silicone material is not permanent attachment to the dash. It can be taken off from the dash easily, and the silicone bottom become sticky as new after flush.
• ✅Perfect Driving View: Thanks to its mobility, you can put the cell phone car holder at best position for your view. Two different angels provide more choices for you to find non light reflect and clear screen view.

User questions & answers

Question:	Will this hold a GoPro Hero
Answer:	Cellphones are about 3 inches wide and around 5 inches long. This holder with hold them either portrait or landscape style. So, I think it would hold your Go Pro as long as its not being bounced around. Its not any kind of a lock down mount.
Question:	will it work with a android note
Answer:	Not sure how big Android 4 is but it holds my iPhone 8 Plus. Note, this only holds horizontally. You can’t use it vertically. That’s why I return mine.
Question:	Does this fit nite 10 plus with case
Answer:	I have an I phone X max and it fits great
Question:	Can you stick it on and off your dasbboard
Answer:	Yes! Easily! It doesn't actually stick. It lays on the dash and doesn't move. It works very well.

Product features

Aonkey Car Phone Holder Compatible with Different Devices:

• iPhone XS/XS Max, XR, X, 8/8 Plus, 7/7 Plus, 6/6S/6S Plus, 5s, SE,5C
• SAMSUNG Galaxy Note9, Note8, Note Edge, S10, S10+, S10e, S9, S9+, S8, S8+, S7, S7 Edge
• LG V40 Thinq, V35, V30, V20, V10, K30, K7, K8, G7 Thinq, G8 Thinq, Stylo 3, Stylo 4
• Google Nexus 6P, Pixel 3/3 XL, 2 XL, XL
• Moto Z3/Z3 Play, Z2/Z2 Play, G6/G6 Play, G7, G5 Plus, E5,E4, X4
• Nokia 7.1, 3.1 Plus, 2V, 7.1, 9, 3310, 8/8 Sirocco, 6, 6.1/6.1 Plus, 5, 5.1/5.1 Plus
• HUAWEI P30/P30 pro, P20 Lite/P20 Pro, Mate 10 Pro/Mate 20 pro, Mate se, 5X, Honor 8X
• GPS navigator, like Garmin Nuvi Drive DriveSmart DriveAssist, TomTom GO Start, Magellan Roadmate etc, and any other handheld devices less than 7”.

Features of Dashboard Phone Mount for Car:

• Easily removed from one place to another
• Designed without magnets, no harm to phone
• Can be washed and reused as new
• Soft rubber avoid your phone to be scratched
• Besides used in the car, also work for meeting, movie watching, music playing and so on.

Fit for Different Kind of Dashboard

Bottom of the phone holder is silicone, sticky gel and a suction cup , ensure sit on different kind of dashboards firmly. Work good for different kind of cars, such as Audi, truck, Uber, Toyota, Wrangler, Jeep, Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, KIA and so on.

Removable, Reusable and Washable

The car mount grip rather than adhesive to your dashboard, so that you can move it from one car to another easily. Everytime when you want to change a position, flush it under water so the holder can be used as new.

No Matter What on Your Phone

No matter what accessories on your phones, ring holder or heavy cases, you can directly put your phone on the cell phone holder, very convenient and time save.

• [3 in 1 Cell Phone Holder for Car] Over 10 years, we've proudly committed to building ultra-stable & durable car phone holder mount for customers. This iPhone-12 appearance multi-function phone car holder is made of advanced durable sturdy aviation-grade materials(PTFE). So this car phone holder [Doesn't Melt & Stuck]can be secure and stable mounted to your dashboard, windshield or air vent even in extreme environments. Best choice for drivers of pickup, SUV, trucks, taxis, Uber, Lyft etc
• [Most Convenient & Comfortable Car Phone Holder Mount] Bases on 3rd-generation car phone mount, our product manager designed this 4th-generation phone car holder with the quick-release button on both sides to meet different customers' needs. Either you press one or both buttons, you can quickly release your phone in 0.1s. Squeeze the fingerprint clamps lightly to lock your phone 100% firmly, never falling off. You can lock or release your cellphone with only one hand, super easy to use
• [Ultimate Secure Stable Phone Car Holder] The car cell phone mount features a strong suction cup with tight vacuum lock mechanism, keeps this phone mount car more stable and won't move on your dashboard or windshield. Remove easily by opening the lock without leaving any nasty mark on your dash. Extra upgraded vent clip never falls from your vent & never breaks. Silicone on the clip helps this phone vent holder grip on your vent tightly and protects the blades from scratching
• [Thick Case& All Phones Friendly Car Cell Phone Holder] Adjustable foot, wider and deeper clamp arm make this cell phone automobile cradles fit for all 4''-7'' smartphone and thick cases. Such as iPhone 12 11 pro max/SE/XS/XR/XS Max/X/8/8 Plus/7/7 Plus/SE/6s/6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note 20 / S21/ S21+/ S20/ S20 +/ S20 Ultra 5G / 10/ 10 +/ S10/ S10 +/ S10e/ S9/ S9 +/ S8/ S8 +/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google Pixel, Nokia and all mobile phones, GPS devices.
• [Optimal View Angle Phone Holder for Car] VICSEED Upgraded car mount for phone has the firmest & most flexible telescopic arm on the market, can extend from 4.84" to 9.05", and pivot up or down(270°)for optimal viewing height. 360° swivel ball head on the back of the phone holder ensures this car phone mount support your smartphones either vertically or horizontally even on the roughest road. Doesn't block your view while driving, enjoy a safe driving journey.

Product features

VICSEED 2021 iPhone-12 Appearance Design Wood Pattern Car Phone Holder Mount

►VICSEED Cell Phone Car Mount Advantage:

• Wider and Deeper Clamp Arm: Support THIN and THICK phone case.
• Adjustable Foot: makes this car phone mount works with Larger Phones and all 4"-7" mobile phones.
• Both Sides Release Button: to meet different customers' needs. can let you put and get phone easily.
• Easy to Install and Use: No tools required. With easy one press button to releases your phone, 2-time Squeezing to lock your phone on the holder.
• Multi-Angle & Fully Adjustable: 360 degree ball-joint rotation, you can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls.

Adjustable Feet Design

• Fits for ALL SIZE Mobile Phones

Ports & Speakers 100% Accessible

• Easy Access to the Charging Port, Allows Fuss-Free Charging on the Road.

Thick Case Friendly ( 0.7'' Depth)

• Without to Remove Your Phone Case Every Time.

Quick Release Button on Both Sides

• The phone holder for car with the quick-release button on both sides to meet different customers' needs.

Optimal View Angle

• 360-degree ball joint makes you easy to find the ideal phone viewing angle.

Latest Improved Super Strong Suction Cup

• The suction cup can be easily removed without leaving any nasty marks, simply rinse in water and let air dry to restore the stickiness.

What You Get:

• Car Phone Holder *1
• Super Stable Suction Cup *1
• Upgraded Metal Air Vent Clip *1
• Dashboard Pad *1
• User Manual *1
• Replacement Service*18 Months

• [Stick - Sticker - Stickiest] This universal car cell phone holder uses Torras's third-generation suction cup, with three layers of super glue, which makes the mount sticks firmly to your car dashboard or windshield.
• [Strong Muscular Arms] Based on a year-long test, we found the most suitable wrapping angle for the car mount. The designed arm is more wrapping than the normal mounts. It hugs the "child" tightly like a father's thick arm.Such a strong arms is a perfect choice most of the phones, especially the big phones, such as iphone 11 pro max.
• [Skidproof! Scratch-proof!] Torras never ignores every detail, even the small silicone pads, which have been rigorously tested. For most of the silicone pads on the market, we use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, ensuring that there is no gap between the phone car holder and the phone! So you needn’t to worry about your phone suddenly falling off during the journey!
• [3 In 1 Multi-function] With the latest powerful suction cup and air vent clip, this car phone mount could be installed the cell phone holder on car dashboard, windshield or air vent securely. Even on the off road, it won't stop working; Great choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Military Grade PP Material] Say goodbye to the easy-scratched plastic panel car mount .Adopt top quality PC and bite structure, passed the latest 17 shaping process. High quality and perfect appearance! It's not only a car holder in your car, but also a great decoration!
• [Super Secure Car Phone Holder] Unique streamlined inward shrinking clamp, hug your phone tightly, never fall off; Press the lock mechanism of the suction cup, it will make the car phone mount tightly locked on the dashboard; With the extra sticky pad, it helps create a smooth surface when the dashboard is not flat; Triangle air vent clip, as solid as a rock, you can rotate the wrench to tighten it according to the thickness of the vent; The supporting pieces will lock it from fall down.

User questions & answers

Question:	Do this fit iPhone X with a case on it
Answer:	My normal shoe size is 10.5 but some shoes I wear a 11 . I ordered these in an 11 and they fit great.
Question:	Will this car phone mount fit a note 10+ with an otter box case
Answer:	i wear 12 and it fit just fine
Question:	I have a iphone 11 pro max with an otterbox case, will it hold my phone
Answer:	They fit me like a high top basketball shoe. Just above the ankle.
Question:	Is this suction cup stable enough
Answer:	not sure if they are all like this but I'm a size 10 1/2 so I got a size 10. these fit perfect even after a year of using them.

Product features

Simple But Unique

• You don’t need to hesitate how to choose the car phone mount any longer. Choose this one, you are free to install it on the dashboard, windshield or the air vent. There must be a suitable installation method for you.
• Unique Streamlined inward shrinking clamp, hug your phone tightly, never fall off. It's like a pair of arms holding your phone tightly. Super secure for your phone.
• Latest internal gear structure! On the one hand, the open process will be smoother. On the other hand, the accuracy of gear engagement is higher. That means it will greatly reduce the possibility of gear work errors and extend the service life of the gears. Tests show that its average service life is more than twice of other one button open car mounts.
• Fit for more cars, more phones, more phone cases. The true universal car phone mount.

Best for you!

• Ultra Stability:Car phone holder can be mounted on dashboard windshield for this car phone mount is equipped with suction cup. This car phone holder has suction pad which will absorb the shock caused by the car. Adjustable devices adopted by this cell phone holder for car are superior in quality. Note: no exposure to the sun (suction cup) for extending its working life and works much better for dashboard with less texture.
• One Hand Operation: Cell phone holder for car is designed to be compact and convenient. Installation and adjustment are effortless. The car phone holder fits firmly and perfectly with your devices. The quick release button allows one to operate the car phone mount effortless.
• Wide Compatibility: Car phone holder suits for various devices. The cell phone holder for car is compatible with different smartphone devices such as iPhone Samsung Galaxy Moto Huawei Nokia LGiPhone Samsung Galaxy Moto Huawei Nokia LG.
• 360 Degree Rotation: The fully 360-degree rotation of this car phone holder ensures you the best viewing angle. This car phone mount supports cell mobile phone vertical, horizontal usage.
• 18 Months Guarantee: This car phone mount is protected by a 18 months Guarantee; we will provide refund or replacement under any condition, to ensures your 100% satisfaction with your purchase.

User questions & answers

Question:	Can this cell phone holder for car support phones with a heavier & thicker battery
Answer:	Yes, it can. I think my phone is heavy, this phone holder for car works with my phone perfectly and never drop.
Question:	I just received mine and it does not clamp shut? if there a trick to this or is it suppose to stay open? it seems like it should shut by the notes
Answer:	The button on the back opens it. And you should just be able to squeeze it shut
Question:	Is there a popsocket holder attachment
Answer:	I don’t think a pop socket would work. The phone sits flat against the back of the holder. I don’t think a pop socket would fit in the space available. If it did, I don’t think the phone would be sit securely.
Question:	This product is flimsy and the tension spring is loose. I’d like a refund or an exchange
Answer:	The spring mechanism quit working for me after a few uses and the seller won't respond.

Product features

Phone Width from 2.7″ to 4.2″

Universal compatibility of this car phone mount ensures it's compatible with the vast majority of smartphones. Quick release button located on its back enables one to mount and remove with a single hand gesture.

Adjustable Arm.

The telescopic arm rotates 225° and can be extended from 4.6″ to 6.6″, the pivot ball joint rotates 360° for perfect viewing angles.

360 Degree Rotation.

The ability of this car phone mount to rotate 360 degree means one has the choice between portrait and landscape viewing.

Strong Suction Cup.

Suction Cup has a sticky gel surface that securely attaches to your car’s dashboard or windshield, and can be cleaned with water and air dried for continued stickiness!