12 best dashboard holders for iphones

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• 【Philosophy of Chief Designer】It's my star work among 100+ car holder designs, which recovers originally simple. Simplicity is a philosophy & joy & life attitude. Wish the simple product & service can please you. Expecting your opinions to grow my baby
• 【Patented Multi-scene Design: Car/Desk/Kitchen/Bathroom/Gym】VANMASS car phone holder brings sticky suction cup & steel-cored vent clip from 3000+ surveys. Ideal present for your specials. Luxury look & structure was certified by RoHS, CP65, REACH
• 【Original 4 Technologies- Thanks to Millions of Users' Voice】1) Extreme -40~194℉ Weather resistance from precious KING of plastic 2) Super suction power up to 44LBS 3)Extra pad for smooth surface 4)Steel-cored 3-Level Clip: 20X stable & durable
• 【Millions of Users Preferred 0.96” Width Bottom Tray - Easy to Touch HOME button & Unlock screen & Plug charge cable】Upgraded from flimsy drop-down bottom tray, the solider & wider bottom tray can support any weight phone on the bumpy road
• 【Luxury Present: Top-notch Configuration & Profound Package】Exquisite car phone mount (suction cup/vent clip/pad) is fully protected in Elegant & Eco-friendly box. V-shaped pattern on the package means Vibrant & Victory to you and your special one

Product features

Luxury Configuration with Decent Package

• 1x Phone Cradle
• 1x Exclusive Suction Cup Mount
• 1x Alternative Steel Cored 3-level Clip
• 1x Adhesive Dashboard Pad
• 1x User Manual
• 1x Thank You Card

NO Melt, NO Break - Patented Design & Advanced Material

Boasts 5 years of experience in car holder, we finally find the best materials & structure for durable use even in extreme condition (Bear 10,000 times vibration).

Sturdy yet Gentle - Fully Soft Silicone Protects Phone

Soft full silicone rubber interior would protect your expensive phone from scratches & bumps. Grip your phone like hands, tight but no hurts.

Stainless Steel Structure - Last Forever

Different from the easy-to-wearing iron screw, this mount uses the stainless steel screw to be incredibly solid & steady, tested under extreme 10Hz super high vibration frequency for 26,000 hours.

Leading Super Adhesive with Strong Suction Lock

Reinforced sticky suction pad is 5 TIMES stable & flexible than others. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers. Also can be a useful desk phone holder.

Best Gift Idea

VANMASS car mount will help your lover take advantage of all phone’ s handy features without taking the hands off the wheel to ensure his/her safety.

Product description

About SRUNP

Car Dashboard Phone Mount - SRUNP Cell Phone Holder for Car with Three-Point Support, 360 Degree Rotatable Washable Car Phone Mount Compatible with Smartphones and GPS Devices

 Why Choosing Us?

 · Adopts 3-point support design for maximum stability and security

· Made of anti-slip and scratch-resistant material

· Comes with 360 degree rotating base for any angle adjustment

· Can hold phones both vertically and horizontally

· Designed with high tech adhesive which holds tightly to dashboard

· 30-day money back service for quality insurance

 Specification

 Item: Cell Phone Holder for Car Dashboard

Material: Soft Silicone Rubber

Color: Black

Weight: 1.9oz

Chassis Diameter: 3inch

 Wide Compatibility

 The car phone mount is compatible with most phones including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung galaxy Note 8 /9/10 /10 pro, S 8 /9 /10, S 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Motorola and other GPS device with thickness less than 0.47inch

 Package Includes

 1 x Car Phone Holder for Dashboard

• [PATENT DESIGN] The car dashboard phone mount adopts the principle of triangular to ensure stability, steadily supporting your cell phone at three points without shaking or slipping. Soft silicone rubber material is anti-slip and protects your phone from scratches.
• [Convenient Design]The cell phone car holder comes with a base which can be rotated 360 degrees, which makes it possible to adjust angles as you wish as well as to ensure a safe and comfortable driving experience regardless of navigating or listening to music.The phone dash mount for car can hold your phone in both horizontal and vertical direction, which makes it easy for you to either watch movies or charge phones on the way.
• [STRONG ADHESIVE] The car mount holder is crafted with premium strong adhesive which sticks to the dashboard tightly, which protects your phone from bumping or flying out if you make a sharp turn or sudden stop if emergency happens. nano gel strong stick glue,reusable ,no traceless left.
• [Widely Compatibility] The dashboard cell phone holder is suitable for most kind of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung galaxy Note 8 /9/10 /10 pro, S 8 /9 /10, S 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• [100% MONEY-BACK] If you, for whatever reasons, do not like our dashboard cell phone mount within 30 days, please feel free to contact us and we will, within 24 hours, arrange a full refund or a replacement without any questions asked.

User questions & answers

Question:	Can this car mount be used to hold Alexa auto
Answer:	This is a mini mount with a diameter of 3.05 inches. It only needs a small area on the dashboard to be installed.
Question:	Is there a way to fix the stick padon the back of it? Mine fell onto a piece of paper
Answer:	I have no idea what the stick padon is. I have no idea how it works, wish I did. NO INSTRUCTIONS left me no knowing how to use it and now I am TUCK not having it working. Sorry I am not able to help you. I thought and it looked very easy to use, which it is as far as putting my cell on it. Other than that, forget it.
Question:	Can this phone car mount hold the GPS device
Answer:	Yes, the product description says it can hold the GPS with a thickness less than 0.47 inches. I have a small GPS device, and it fit the phone mount very well.
Question:	can this fit a flipcase
Answer:	If your flipcase is between 0.27 and 0.47 inches thick, this Car Phone Mount fit well.

• 【Easy Operation】The car phone mount with one-click system that enables you to release or lock your phone with just one hand and the swivel ball allows the clamp 360°free rotations to your desired viewing angle.
• 【How to use the Suction Pad】Keep clean where you install the phone mount. Open the lock lever before using, you should press the base until there is no air gap between the base and the suction,then lock the lock lever, rather than to stick directly to the dashboard or windshield.
• 【Perfect Protection】The phone holder for car also with an adjustable supporting foot that you can up and down it, which hold your phone more stable. And the protection silicone pad on the side arms and supporting foot will ensure your mobile device is safe from wear and tear.
• 【Extreme Flexibility】This car phone holder with adjustable telescopic neck can extend from 5.1- 7.48 inch and pivots on 225 degree arc for a variety of optimal positions as you need. If you have any questions, don't hesitate to contact us!
• 【Warning】Due to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Please note, most likely will not work on leather/ vinyl dashboards.

User questions & answers

Question:	Will it fit an lg cell phone
Answer:	Yes, any standard size because you adjust the sides to fit
Question:	How do you release the phone? And how wide it can extend
Answer:	Our Phone Holder for Car with one-click system that enables you to release or lock your phone with just one hand. To release the clamp by pressing the lever，put your phone in and your phone will touch the button on the back, then the arms will be locked automatically and hold your phone tightly. To release the phone， you just yank your phone out, it is convenient but no harmful，because the clamp side is cover with protection silicone pad. The clamp can extend from 2.36'' to 3.54'', this car phone mount is compatible with 4.7'' to 6.8'' phones. Any questions，feel free to contact us.
Question:	Will it stick on a textured dashboard
Answer:	Stick on the smooth surfaces or windshield will be better. Keep clean where you install it. The suction can be washed with warm water to reuse . The button should be opened before installing, the suction worked by operating the button rather than stick to the dashboard or windshield directly, so be sure press the base until there is no air gap between the base and the suction, then lock the button tightly.
Question:	How can I make the suction cup work better
Answer:	Keep clean where you install the car phone holder. The lock button should be opened before installing, the suction worked by operating the button rather than stick to the dashboard or windshield directly, so be sure to press the base until there is no air gap between the base and the suction, then lock the button tightly. And the suction can be washed with warm water and air dry to reuse . Any questions,please feel free to contact us.

Product description

Flepow Magnetic Car Phone Mount Holder is an ideal companion on the road with powerful magnetic force and an perfect car interior decoration with exquisite craftsmanship.It is absolutely safe and reliable for the cellphone, tablet and GPS. Place your device within easy reach of your arm, allowing you to concentrate on the road with minimal distraction. Small but mighty, this tiny car phone holder is your best choice!

Features:

1.Extra magnetic made your device ( phone tablet GPS )safe because they were locked into place ;

2.Innovative 3M bond adhesive technology sticks strong against any smooth surface but leaves no marks. No Matter where you are,office,home ,kitchen etc ,your phone is always at hand;

3.Universal:Fits any phone ,GPS or Tablet (under 10”) anywhere as long as it has flat surface;

4.Installing our magnetic car mount inside or outside of your case ,looks awesome and performs better .No cradles, clamps or suckers, just the magic of the magnet;

5.360°rotation adjustable magnetic phone holder allows you adjust it to any viewing specification,only need 1 hand 1 second;

6.The Minimalistic stylish design take up minimal space,fits all the car;

7.Free your hands: Have it ,free your hands when you driving ,running,watching ,shower or busy do any other thing.

Installation Tips:

1.Clean smooth surface with cloth until it was fully dry ;

2.Install the magnetic car mount and press it into position for 10 seconds;

3.Please use it after 24 hours.

Note:

1.Please remove the metal plate when you use wireless charging;

2.Apply a few drops of rubbing alcohol before removing,it won’t leave marks.

• ★★ Risk - Free Quality Assurance ★★ For your absolute satisfaction, we are proud to offer a 3 years 100% money back/replacement assurance. Please contact us freely for replacement or refund if you are disappointed in anyway!
• 【Super Strong Magnetic 】 FlePow Magnetic Phone Car Mount with Built-In N52 Magnet (upgraded). Super compact and sturdy with a low center of gravity which allows a secure attachment of even large equipment, no more worries about your expensive phone/ device falling，Supports weighing up to 6.8 lbs / 3.5 kg without losing its grip.
• 【 Industry Leading Adhesion 】 '3M VHB' Adhesive provides an industrial bond between the dashboard and the phone mount. Firmly attach to any plane in the car, position your device, and the mount will adapt to a variety of road conditions such as sudden braking, speed bumps, and rugged road conditions.
• 【 360° Rotation & 90° Tilt 】 Multi-pivotal adjustment angles allow you to keep a clear line of sight to your device and over the dashboard. Enjoy the convenience of quick single-handed adjustments ensuring a clear view to your GPS Navigation. Note: The protected magnetic field will not affect the signal/ functionality of your device.
• 【 Modern & Versatile 】 The miniature mount offers positioning where others cannot, and protects your clear line of sight. The mount supports a wide variety of the smartphones and devices such as GPS, Tablets, iPhone ( 11 /11 Pro Max/XR/XS Max/X/8 Plus/7 Plus/8/7/6/6 Plus/5/5s/Se) Samsung (Galaxy S10/S10+/S10e/S9/S9 Plus/S8/S8 Plus/S7/S7 Edge/Note 10, 9, 8), LG (G7 G6, Pixel 3a/3/3XL/2/2XL), HTC, Sony Xperia, Nokia, Nexus, and many more!

Product features

Step One

Wipe the target spot with an alcohol prep pad and wait until it is completely dry.

Step Two

Peel off the 3M protector (If the temperature is below 15°C, please warm the 3M pad with hot wind for a while)

Step Three

Press down on the mount with force for about 30 seconds to strengthen the attachment.

Step Four

Place the phone to the mount (Do not use the mount until 24 hours pass)

Signal Lossless

Powerful magnetic force can make sure your device be fixed tightly without affecting the signal of the device.

• 🚘Multi-function 3 in 1 Car Phone Mount: Phone car holder have washable suction cup and upgraded air vent clip, you can install it on the dashboard windshield or air vent.Apply to most of cars,trucks,SUV,trucks and it as good assistant for Uber taxis drivers.This holder will keep the phone stable make sure safe driving even if turning,braking or driving on bumpy road.
• 🚘Adjustable Any Viewing Angle: Car phone holder stay at your air vent, not block your driving sight. Windshield dashboard phone holder with a telescopic arm can extend between 4-6.6 inch(10-16cm). Just pull or push that adjusts devices get the right length without manual rotation of the nut. 360 degree rotation and 270 degree up or down support mobile phone vertical, horizontal using, allow differnt angle for you to get perfect sight.
• 🚘Universal Compatibility: Phone car mount suits for various devices（4-7.2 inch）that width maximun 3.95 inch(10cm) and thickness maximum 0.67inch(1.5cm) . Universal compatible for smartphone such as,iPhone 11/11 Por/11 Pro MAX/X/XR/XS Max, iPhone 8/8Plus/7/7 Plus/6/6s plus case, Samsung Galaxy S20/S20 Plus/S10/S10 Plus/S9/S9 Plus/Note 10/9/8 Nexus,car accessories for different smartphone devices. Phone will battery wallet case can not used for it.
• 🚘One Hand Operation: Car mount bring you convenient experience when you driving the car.You can press the button on the right side of the mount to open the clamps. Just place your phone on it with the arms open and squeeze the arms manually，then the holder can grip the phone by three sides no-slip rubbers tightly,this can also allow you release the phone easily.
• 🚘Safety & Guarantee: We are aimed at offering you a perfect shopping experience, you can get 12-month warranty for each phone car mount. If there's any problem with your purchase, you could contract us directly and we will provide a satisfied solution for you within 24 hours.We hope to bring customers relaxing comfortable life experience.

User questions & answers

Question:	will your phone drop from the car phone mount when the car is turning
Answer:	My phone grip by the holder tightly when turning or braking.
Question:	may i know whether i can use wallet case on the phone car mount
Answer:	No, you can not do that . I have wallet case and not used on the holder.
Question:	does this dashboard car holder fit for iPhone 8 plus with case
Answer:	hello Phone holder suits for various devices（4-7.2 inch）that width maximun 3.95 inch(10cm) and thickness maximum 0.67inch(1.5cm) we advise you can used for iphone 8 plus with slim case
Question:	can this car dashboard phone holder works at vertical vent instead of a horizontal vent
Answer:	Hello: we suggest that you can use the air vent holder at vertical , do not used for horizontal and circular vents.

Product features

RAXFLY Multi-function Dashboard Windshield Air Vent Car Phone Mount 3 in 1 Phone Holder For Car

Car Phone Holder Compatible for width 3.95 inch(10cm) and thickness maximum 0.67inch(1.5cm) devices.

1. Compatible with iPhone 12 11 11 Pro Max X XR XS Max 8 7 6 6s Plus Case For iPhone 6 6S 7 8 Plus
2. Compatible with Samsung Galaxy S20 S10 S9 S8 Plus S7 S6 Edge Plus S5 Note 20 Plus 8 9 10
3. Compatible with LG, Google, Moto, Sony, Nokia, Huawei, GPS Devices
4. We recommend using car mount holder for cell smartphone with Slim case Otterbox case
5. thickness exceed 0.67inch do not use,such as Wallet Case Battery Case

Upgrade Air Vent Clip

Adjustable width twist-lock clip adapted to various thicknesses of blades widely.

Compatibility For Horizonta Vent

This Phone Car Holder is suitable for horizontal vents.Can not used for vertical and circular vents.

Press lock Suction Cup

Soft suction pad bring superior stick strength and can be washable to reused.

Suitable View Angle

270 degree up or down that makes devices get suitable location

One Hand Operation

Mount can grip the phone tightly and also release the phone easily.

360 Degree Rotation

360°rotation joint bring your phone devices at the perfect angle and make the driving safe.

Reserved Space for Cable

Car phone holder will not block the charging port of your phones. Keeping your phone charged at all times.

Installation Instruction

Dashboard Car Mount

1. Turn counter the nut that on the back -clockwise to remove it.
2. Be sure you put the threaded ring through the ball first.
3. Snap right the ball into groove on the back of the holder ,tighten the nut around the well,
4. Keep windshield dashboard or other surface clean and dry.
5. Put the mount at the place that you have clean.
6. Press the button on the bottom of the holder and fix it on your car.

Air Vent Car Mount

1. Turn counter the nut that on the back -clockwise to remove it from the cell phone holder for car
2. Slide the ball through the nut and snap right the ball into groove on the back of the car holder.
3. Tighten the nut around the well, be sure you put the threaded ring through the ball first.
4. Rotate the screw above twist-lock clip and make clip open.
5. Twist the holder to the side that you can install easily, make the twist-lock clip into the air vent, rotate it to stabilize.
6. Press the button on the right side to open the holder head. Put devices and squeeze lock.

Product description

● Our patented product with reasonable design

● One-hand control, very convenient to operate

● 360 Degrees Free Rotation for Multi-angle Viewing

● Suitable for: 60-94 mm width of mobile phone (about 4.0-6.6 inches)

● Support for Smart Mobile Phones, include iPhone, Samsung, Nokia, Sony and more

● Material: ABS+Silicone

● Product Size: about 3.5 x 3.1 x 5.1 inches

● Product weight: about 90 g

● Package Includes: Car Phone Holder x 1 pc

• > Universal: you can clip HUD Phone Holder to the car dashboard, sun visor, rear view mirror or even computer desk. The strong spring buckle base, moreover got anti-slip silicone pad, will catch the splint and the mobile phone stable and sturdy, even driving through very rough road, so never worry about scratching or dropping
• > Safe Structure: cell phone holder for car, upgraded patented design with spring buckle base, which made of stainless steel, durable and sturdy, main parts are made of ABS material, heat-resistant and cold-resistant, the product will not deform under high, low temperature or long-term sunlight
• > Convenient: this car phone holder mount is very easy to install and use, one-hand operation, you can easily remove the mount from your car or pick up your phone from the phone mount
• > 360 degree rotation: just adjust the car phone holder as you need, so that it does not block the sight. HUD design on dashboard, to get the best driving view, ensure your safe driving while using GPS, talking, navigating, listening to music or charging
• > Compatible Devices: this car phone mount is compatible with almost all 4.0 to 6.6 inches smartphones (about 60-94 mm width of cell phones)

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

• 【Wide Compatibility】: This Cell Phone Holder universally is applicable to mobile phones ranging from 3" to 7"(Cell Phone with 6~12mm / 0.23~0.47 inch thickness), such as iPhone XS Max/XS/XR/X/8 Plus/8/7/7 Plus/6/6 Plus/SE/5S, Samsung Galaxy S7 /S8 /S8 Plus / S9 / Note 8 / Note 9, LG V30/V20/G6/G5, Google Pixel/Pixel XL. The car smart phone mount also fit for other Samsung LG HTC Motorola ZTE Phone and other smartphones or GPS Devices.
• 【Special design】: GPS holder for car is One-handed operation, insert or remove your mobile phones much more quickly and easily, Small size. No need to install, it can be placed anywhere on the car's dashboard, using ergonomic 100-degree comfort angle, reduce driving blind spots, safety accompany all the way. Apply to SUV such as for Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, and KIA
• 【Washable & Reusable】: Rip the bottom plastic liner and the cell phone holder can be directly adhere to dashboard or smooth surfaces without any mechanical installation and will not leave any traces when removed. The bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it will be the same as the new one.
• 【Versatile Phone Holder】: Cable Slot design makes the USB charging cable well organized when charging. The front roomy space of the mat holder is good for keys, coins, gadgets etc. Elegant fashionable profile, works perfectly as a cellphone stand in office or home for meeting, watching movie, playing games etc.
• 【Stable & Anti-Slip】: Dependents on its soft silicone bottom and sticky pads it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn.Vehicle Mount with soft, flexible double snap design (elastic contraction), comfort and firmness, will not press the volume keys.

User questions & answers

Question:	Would my Pixel 3XL with a case including a popsocket fit in this
Answer:	I have an iPhone 11 with a case and poo socket and it works perfectly.
Question:	Can this be used for a garmin gps
Answer:	In principle, yes, but it depends on thickness. If the Garmin is much thicker than a mobile phone, then it will be hard to stick it in the space there. Also consider the location of the charger port, the Garmin that I owned had it in the back, so it would not be possible to connect it while in the holder.
Question:	Will my coffee mug fit the surface
Answer:	If you are asking if your coffee mug can fit in the area to hold it, the answer is no. The back and front are rounded and slotted to fit the phone only.
Question:	Can it be transferred to many cars? I travel and need a holder to use in many rental cars
Answer:	Yes, This car phone holder is very easy move from one car to another. Be sure to clean the spot you are going to stick it to and save the film that is on the bottom of the holder.

Product features

Features

✔Easy to move, You can keep the plastic film at the bottom, If you want to move the phone holder anytime.

✔Using ergonomic 100-degree comfort angle, reduce driving blind spots, safety accompany all the way.

✔Staont cell phone holder can be directly adhere to dashboard or smooth surfaces and will not leave any traces when removed.

✔Adapt to different models and types of cellphones as well as GPS devices with screen size of 3.5-7 inches.

✔Design with cable clips, perfect organizer for placing your USB cord or other charging cables. Keep dashboard uncluttered and organized while charging the phone.

✔Can be reused, The bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it sticks to the new surface just like it did the first time.

Warm Tips

Works for dashboard with a flat surface and slight curve.

Works for phone with thin protective case. Can not hold phone with very thick phone case (thickness is out of 0.47 inches).

When using the phone holder in the office, kitchen and living room, it is recommended not to tear the plastic lining at the bottom.

There may be some bubbles at the bottom of the package that do not affect the use.

STAONT is committed to giving you the most sincere customer experience, the most perfect product experience.