14 best cell phone mounts

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

Product description

The role of the car phone holder is mainly to provide a carrier for the mobile phone. By fixing the mobile phone to the car phone holder, you can use mobile phone navigation, video and voice calls, etc.



Product features of this car phone holder:



1. Upgrade the car mount arm, change the curved clamp arm to the rectangular clamp arm, change the center of gravity of the clamp arm, and better hold the mobile phone



2.The car phone mount is compatible with phones up to 6.8 inches, including iPhone 11 Pro Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Note 9/8/7 and more



3. Upgrade the clip of the car phone mount, the 3-level adjustable clip is easy to install and disassemble, the clamping force is stronger, and it can be better fixed in the vent



4. Ball joint design, you can rotate 360 degrees through the ball joint until the comfortable angle of view



5. We have reserved enough space for the charging cable between the two car phone mount feet to ensure that the phone can be charged normally.



6. On the surface of the product, the inside of the clamp arm and the car phone mount foot are attached with a sponge pad and a silicone pad to reduce the friction of the mobile phone and the mount, and protect the mobile phone.

• Adaptable to Most Phone Sizes: The phone holder expands up to 95mm/3.7in wide, holds most phones with screen sizes between 4.7’’ and 6.8’’, including iPhone Xs Max/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6s Plus/6s; Galaxy S10/S10 Plus/ S9 Plus/S9/Note 9/Note 8/S8/S7/S7 Edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; LG; BLU; Xiaomi; Moto and more. TIPS: Supports phone case thickness up to 13 mm / 0.5 inch.
• Upgraded Arms for Secure Hold: The side arms have been upgraded for stronger stability. Compared with the old version, the center of gravity of the arms has been shifted up so that your phone stays put without wobbling. There are sponge pads on side arms, which will protect your device from falling out and scratching.
• Stays Put Without Falling Off: Featuring inner Manganese Steel plates and durable PC material, the extended vent clip will stay in place regardless of the road conditions. The spring-loaded vent clip is equipped with an adjusting lever, providing you with 3 different tightness. 1st level: 2.5 - 3.5mm; 2nd level: 1.8 - 2.5mm; 3rd level: ＜1.8mm, fits most vertical or horizontal vent louvers.
• Easy One-Handed Operation: The car phone mount has a quick-release button on the back. There is no need to expand the arms with your hands, just place your phone in the holder and squeeze the arms to hug your devices. Also, you are allowed to remove your phone without hassle. There is space between the bottom feet for you to attach a phone charger.
• Keep Your Phone in Sight: The 360 degrees ball joint ensures that you hit the sweet spot every time you place your phone in the car phone holder. You can get the comfortable viewing angle by adjusting the mount up/down or vertical/horizontal. The air vent-mounted car mount enables you to access your GPS, music and all controls easily without blocking your vision while driving.

Product features

Mpow universal air vent car phone mount

Mpow air vent car phone holder has been designed to fit most car air vents due to its three-level thickness settings. With Mpow car mount, you will free your hands from holding smartphones and improve driving safety without blocking your sight.

Reserved Charging Port

At the bottom of the cradle, there’s a reserved space. It is the perfect size for a phone charger to go through. Don’t have to take your phone out of the cradle.

Fits the vast majority of smartphones easily

The stretchable clamp can hold devices with a size of 4.0 - 6.8 inches, perfect for iPhone, Galaxy, Google Pixel, BLU, OnePlus, Motorola, LG and so on.

Adjustable Angles

Fully adjustable with 360-degree rotation for viewing your device at the right position. Change your perspective with a simple ball-and-socket joint.

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• COMPLEMENTARY WIXGEAR DESIGNS: The complementary design of the magnetic mount is one that fits into the back of any smartphone. The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place. magnetic car mount holder
• POWERFUL MAGNETIC MOUNTS: The reinforced magnetic holder of this mount is what sets it apart from other mounts. This Universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Including Android, Apple, Blackberry and Microsoft devices.
• SWIVELS YOUR DISPLAY: Rotate your smartphone and swivel your display as you please. The base of the mount remains stick on you dashboard of your car and does not move, no matter how much swiveling or rotation you do. This guarantees that your smartphone will always remain in your preferred position.
• WIXGEAR STURDY BASE: The high quality rubber construction of the base of the mount is unique and very functional as well. It guarantees that the base of the mount will solidly hold the magnetic head of the mount, to help keep your smartphone in place, regardless of road vibrations or impacts
• WILL NOT BLOCK THE AIR VENTS: and the windshield of the car. Its 5 times easier to use than any other mounts just stick it on your car and you are good to go.

• 【3 in 1 Car Phone Mount】Besides the bracket and suction cup mount, air vent clip is an extra gift for you (fits all air vents with horizontal or vertical vent blades). Can be mounted on dashboard, windshield or air vent firmly. Fit for most cars, pickup trucks, SUV, trucks, taxis.
• 【Strong Sticky Suction Pad】In the -4°F - 158°F temperature range. AIKELA car phone mount with strong sticky gel suction pad sticks firmly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dashboard. Every time wash and air dry the car phone holder in warm water, the suction is like new!
• 【Updated Material Quality】Reliable materials and structure provide 3 times durability than ordinary car phone mount, ensures much longer lifetime and more stable for holding your cell phone.
• 【Fit for All Size Cell Phone】No tools necessary for installation. Adjustable car phone mount with one-click release button can hold almost all size phones (width from 2.16 in to 3.74 in) and most phone case such as Phone 11 Pro, 11, Xs Max, XR, Samsung Note10+, 10, S20+, S20, S10, and other cell phones, GPS Device.
• 【Worry-Free Warranty】30-day money back guarantee and 24 months replacement warranty. You will also get 7×24h technology service and 24 hours quick reply.

User questions & answers

Question:	the car phone mount the thing stable too? Are there scratches on the cell phone
Answer:	Dear art h, Good day! Thank you for your support of our products. As long as you can tighten the screws well and the phone is fixed in the bracket, then it can help you fix your phone. As for the problem of scratches, our mobile phones generally have protective covers, and this mobile phone holder is the soft silicone inside, so don’t worry about this problem We give30-day money back guarantee and 24 months replacement warranty. You will also get 7×24h technology service and 24 hours quick reply. You don't need to worry about that. If you have any questions during use, please feel free to contact us or send the car phone mount back to Amazon. Sincerely Customer Service Team
Question:	What is included in the 3 in 1 car phone holder
Answer:	Dear Kenny w , Good day! Thank you for your support of our products. The bracket and suction cup mount, air vent clip is an extra gift for you (fits all air vents with horizontal or vertical vent blades). Can be mounted on dashboard, windshield or air vent firmly. Fit for most cars, pickup trucks, SUV, trucks, taxis. We give 30-day money back guarantee and 24 months replacement warranty. You will also get 7×24h technology service and 24 hours quick reply. Sincerely Customer Service Team
Question:	What is the base size of this mobile car phone holder? If I put the iPhone 11pro into the dock,will the rear camera still be visible
Answer:	Dear Emma, Good day! Thank you for your support of our products. This car phone mount can hold almost all size phones (width from 2.16 in to 3.74 in), so it can compatible with iPhone 11pro, but the rear camera will be invisible. We provide 30 days no-reason money back guarantee and 24 months warranty. If you any assistance during use, please feel free to contact us or return the bluetooth headset back to Amazon. Sincerely Customer Service Team
Question:	Where can this car phone holder be installed
Answer:	Dear Geoff, Good day! Thank you for your support of our products. This car phone holder be installed on Car Dashboard, Windshield and Air Vent. We do not recommend using suction cups in the following situations： 1. The temperature is not within the range of -4℉-158℉, if the weather gets too hot, use the air vent clip instead, 2. Soft / curved / leather / wood / plush / filmed glass surfaces, 3. The surface is too rough(the groove width is more than 0.5mm thickness). We provide 30 days no-reason money back guarantee and 24 months warranty. If you any assistance during use, please feel free to contact us or return the bluetooth headset back to Amazon. Sincerely Customer Service Team

Product features

WARM TIPS

1. The suction cup of car phone mount should be used in a -4℉-158℉ temperature environment.

2. The suction cup base is suitable for sealed (non-breathable) automotive instrument panels such as plastic panels and EVA surfaces but NOT suitable for leather and textile annel surfaces.

3. The suction position of the suction cup should be flat (not curved or meandered) and the surface should not be too rough (the groove width is less than 0.5mm thickness).

4. The suction cup should be clean. If surface is dirty, it can be washed and please put in air for drying.

5. To better store the car mount, please keep the suction plate pressure valve open.

6. In order to extend the use time of the suction cup, please remove the suction cup by using the pull tab.

Ultra Sticky suction cup

The washable suction cup can be restored by simply rinsing under warm water and air drying.

Tips:

1. Clean the surface before installing the car phone mount.

2. Use a few drops of water in the bottom of the suction cup for a better experience. Do not expose the suction cup to the sun in summer.

If the weather gets too hot, use the air vent clip instead.

3. We do not recommend it for soft / curved / leather / wood / plush / filmed glass surfaces. In this case, install the car phone mount on the windscreen or vent instead.

Extra Air Vent Clip

The thick steel inside of the clip cradle the phone tightly no matter you drive on a rough road or brake suddenly. The external clip is made of soft silicone, which will lock the air vent firmly and not do any harm to air vent blades.

360° Free Rotation

360° highly-flexible rotatable ball joint and 180° rotatable cradle provide infinite viewing angles, and secure your phone at the perfect angle to enjoy a more relaxed and safer drive.

Desk Phone Holder

The AIKELA car phone mount can be your desk phone holder for your daily convenient use. Free-angle adjustment make it comfortable to watch videos.

Package Contents

1 x Car Phone Holder

1 x Suction Cup Mount

1 x Air Vent Clip

1 x Manual

Product description

The MagicMount is a new magnetic car phone mount for conveniently mounting your smartphone and devices to the dashboard of your car, truck, boat or RV. The powerful neodymium magnets hold your phone and device securely in place. The 4-Axis, 360 degree adjustable head and mounting arm allow for optimal viewing. Cradle-free design permits safe, easy one-handed device use and access to all controls and ports.

• PHONE MOUNT FOR VERSATILE USE: Safely and quickly secure a mobile device to any flat surface in the car, home or office
• MAGNETIC MOUNT: This phone mount comes with powerful Rare-Earth neodymium magnets that provide a secure grip to your devices
• OPTIMAL VIEWING: With 4-Axis, 360 Degree adjustable head and enhanced soft touch rubber lock-nut, this dash mount allows viewing from any angle
• CONVENIENT DESIGN: Integrated cable clip secures the charging cable to the SCOSCHE MagicMount and the cradle-free design permits safe, easy one-handed use and access to all controls and ports
• INCLUDED IN PACKAGE: Phone Mount, MagicPlates, Protective film, Alcohol cleaning wipe and User manual; Comes with 3 year warranty

User questions & answers

Question:	How does the 3M adhesive hold up in hot weather 100+ degrees? I've had other adhesivs melt off
Answer:	Old question but I have had mine for over 2 years in 3 vehicles in south texas with no issues. 3 summers with month and a half long stretches of at or over 100 degrees every day.
Question:	What are the dimensions of the baseplate that attaches to the dash
Answer:	None of the answers given are correct. The baseplate that attaches to the dash the magnet measures 1 3/4"W x 1 13/16"H
Question:	What is the difference between the Scosche MAGDMB and the Scosche MAGDM? They look identical
Answer:	I have purchased four of these. I have purchased this SKU both from a brick and mortar retailer and from Amazon. I am 99% certain the B stands for "box" not black, since all of the MAGDMs are black. If you purchase this SKU from a brick and mortar store, it will come packaged in a HORRIBLE plastic blister pack that is EXTREMELY hard to open. If you purchase this from amazon it comes in a 100% recyclable chipboard box with minimal extra paper as well.
Question:	Does the adhesive mount have to be mounted on a complety smooth surface, or is the adhesive pad sticky enough to adhere to semi-textured surface
Answer:	I purchased mine for my school bus (we have to be completely hands free). First I cleaned the area with warm water and dried it with a paper towel. Waited about 30 minutes and cleaned the same area with alcohol pads. Allowed the area to dry and placed the (adhesive) mount and held it for a few minutes to secure it. I have used it for 6 months of road trips (2 hours or more) and a couple of long distance trips (4 hours or more) I have an LG V10 and although I didn't stick the pads on the phone I did place then inside the cover and it hold extremely well. Make sure you clean the area you're placing the mount with alcohol to ensure a strong hold.... School Buses have very bumpy dash areas and this is PERFECT!!!! I have recently ordered 3 more of these for my personal vehicles and for a friends birthday gift! 😄

Product features

SCOSCHE MAGDMB MagicMount Universal Magnetic Mount Holder, Black

The MagicMount is a magnetic car phone mount for conveniently mounting your Smartphone and other devices to the dashboard of your car, truck, boat or RV. The powerful neodymium magnets hold your phone securely in place. The 4-Axis, 360-degree adjustable head rotates to find the optimal viewing angle. Cradle-free design permits safe, easy one-handed device use and access to all controls and ports.

Strong MagicMount Magnet

Magnetic phone mount comes with magnets that provide a secure grip to your devices.

Optimal Viewing from Any Angle

360 Degree adjustable head with soft touch rubber lock-nut provides easy viewing from any angle.

Convenient Design

Integrated cable clip for charging cable and cradle-free design for one-handed use.

About SCOSCHE Industries

Founded in 1980, SCOSCHE was born from, and runs on our passion for cool vehicles, amazing sounds, the great outdoors, travel, motor sports, horsepower and voltage. We’re a company of gear-heads, drivers, surfers, racers, riders, tech buffs, tech users, innovators, and relentless pursuers of perfection. We never get stuck in the past or in the mud.

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

• Worry Free Driving - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
• Easy To Install - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
• Versatile Angles - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
• Powerful Suction - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
• What You Get - Limited One Year Warranty from Maxboost ensures maximum protection for your Maxboost Extendable Arm Car Mount.

Product features

UNIVERSAL COMPATIBILITY

The one-touch side button for a quick release, while the retractable arms for an snug-fit.

EXTRA STRONG

Multi-knobs securely holds your smartphone to your dashboard and windshield.

ADJUSTABLE VIEWING ANGLES

Adjustable arm extends and contracts to provide user with a comfortable mobile experience.

• Want To Adjust The Distance Of The Phone Holder?--This stand features a 33.46" (85 cm) flexible telescopic arm that rotates 360 degrees, allowing you to loosen your hands, reduce neck fatigue and easily position your phone at the desired distance. Ideal Valentine's gifts choose
• Is It Suitable For Your Mobile Phone?--Compatible with cell phones screen from 4.0 to 6.3 inches. The height of the fixed section can be adjusted from 0 to 2.75 inch(7cm).
• ✘ Is The Arm Easy To Fracture?--Our cell phone holder arm is made of 8.5mm Aluminum Alloy, it is hard to fracture, please rest assured to buy; Any questions about this phone holder, please contact us immediately, we will give you the most satisfactory solutions.
• ✘ This Phone Clip Damage The Furniture?--Our handy phone holder for recording can be used at a small table, your bed frame or even a desk! Designed with an anti-slip silicone base, the holder will not cause damage to your furniture.
• 24 Hours Customer Service - Any question about SAIJI cell phone stand, please contact us via E-mail first time. We have a replacement with 12 months and professional customer service support.

User questions & answers

Question:	Is the mount and gooseneck capable of attaching to the stand in back of an iMac 27" desktop and clear the top of the screen
Answer:	The mount is capable since it is a clamp. If you clamp it on the stand and try to bend the gooseneck over the top of the screen, it simply won’t work because the length of the neck is 25” and would simply not reach over the top. If you were to clamp it to the stand and come under the screen then it would work perfectly.
Question:	Does it come with a piece you can attach to hold a tablet
Answer:	I don't think this comes with any attachment for tablet.
Question:	Will this hold a portable home phone
Answer:	It can hold width up to 4 inches, please make sure the width of your portable home phone is less than 4 inches.
Question:	My daughter has become very weak and doesn’t have much arm and hand strength. Is this something she could push out of the way fairly easily
Answer:	I doubt it; however, you might be able to position it for her so it's not in her way in the first place. I use mine to make videos of items I'm painting at the table, so the phone needs to be nearly right over my surface. I have it clamped to the table edge to me left, far enough away that I don't bump it. I wish I had the option of posting a photo. The arm of this holder is flexible, but stiff enough to hold position like in the photo Amazon shows so it takes a bit of strength to bend it the way I want. I'm so sorry your daughter has this problem, and I hope my answer has helped.

Product features

SAIJI Gooseneck Phone Holder

Free your hands and provide you best experiences in use cell phones to watching videos, playing game, video recording, facetime, live streaming, reading, typing.

Durable Material

SAIJI gooseneck phone holder with higher quality aluminum magnesium alloy material, provide more stable and durable using experience.

Wide Compatibility

SAIJI phone holder fits for most 4.0"-6.3" cell phone in the market including iPhone, Samsung Galaxy, Sony, Motorola, Nokia, Huawei, HTC, LG, etc.

Adjustable Stand

With total 33 inch flexible long arm, SAIJI bracket allows you to free your hands, reduce neck strain and enjoy leisure time- no matter the position you want the phone.

Free Your Hands

Whether you are cooking in the kitchen, exercising at the gym, working at the office or laying on the bed, SAIJI cell phone holder allows you to listen to music, watch movies or get directions-hands free.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones