14 best cell phone car holders

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• Easy Installation: Car phone holder is adjustable and fits firmly and perfectly for various cup holders in your vehicle (diameter min 2.5In-max 4in). Securely in the cup holder for car, which will absorb the shock caused by the car. Adjustable devices adopted by this phone holder for car are superior in quality.
• One Hand Operation: Cup phone holder for car is designed to be compact and convenient. Installation and adjustment for this cup holder phone mount are effortless. The quick release button on the back of the phone cup holder allows one to operate the car phone mount effortless, just press it to release your device in seconds.
• Wide Compatibility: Gooseneck car phone holder suits for various devices. The cup phone holder for car is compatible for different smartphone devices such as iPhone Samsung Galaxy Moto Huawei Nokia LGiPhone Samsung Galaxy Moto Huawei Nokia LG.
• Flexible: The fully 360-degree rotation of this cup car phone holder ensures you the best viewing angle. This car phone mount supports cell mobile phone vertical, horizontal usage. The long gooseneck itself of cup holder phone holder can be up to 7＂, you can adjust the height as you like.
• 18 Months Guarantee: This cup holder phone mount is protected by a 18 months Guarantee. We will provide refund or replacement under any condition, to ensures your 100% satisfaction with your purchase.

User questions & answers

Question:	Will my Samsung A6 fit? Two and one-half inches across
Answer:	The base without the extender arms out is 2 1/2 inches in diameter. You can leave the arms fully flush with the base, and it should work. My cup holder is 3 1/2 inches, and I extended the arms. Hope this helps.
Question:	Hello, is it work compatible with charging Galaxy S
Answer:	It does not charge the phone
Question:	How long is the neck of the phone holder for car
Answer:	It’s pretty long. 8 inches. You can tighten it higher in the cup holder if you want it longer
Question:	Can I plug in the charger at the same time
Answer:	Yes there is a opening at the bottom

Product features

Easy Installation

Securely in the cup holder for car, which will absorb the shock caused by the car. Adjustable devices adopted by this phone holder for car are superior in quality.

One Hand Operation

Cup phone holder for car is designed to be compact and convenient. Installation and adjustment are effortless. The quick release button on the back of the phone cup holder allows one to operate the car phone mount effortless.

Wide Compatibility

Gooseneck car phone holder suits for various devices. The cup phone holder for car is compatible for different smartphone devices such as iPhone Samsung Galaxy Moto Huawei Nokia LGiPhone Samsung Galaxy Moto Huawei Nokia LG.

Flexible

The fully 360-degree rotation of this cup car phone holder ensures you the best viewing angle. This car phone mount supports cell mobile phone vertical, horizontal usage.

• 100% Designed, Engineered, and Manufactured in the USA by WeatherTech!
• Designed using interchangeable base cups allowing you to customize the perfect snug fit.
• The adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases.
• Base allows phone to rotate 360°, adjustable for viewing from any seat position.
• Open access bottom lets you easily charge your mobile device while it is in place.

User questions & answers

Question:	Will this fit a 328i series BMW sedan
Answer:	There are 4 size cups I’m assuming it will fit a BMW I have a Chevy &we have a Lincoln SUV & they fit perfectly try it U can always send it back if it doesn’t work
Question:	This product does not fit my car cup holder. Where does the description say I have to pay return shipping costs
Answer:	When initiating the return, select "item not as described" as the reason (this is described to fit all cup holders -- it does not! (mine included)). This typically generates a no-cost return label.
Question:	Will this fit for iPhone 8 Plus
Answer:	hmm I'm not sure exactly, but it fits the 5c, the 5 s, the 8 with otter case and the 11. I have had no problems with the cup sizes for these sizes.
Question:	Why are you charging $7 more than Weathertech for the same cupfone and saying free shipping to prime members while Weathertech charges less
Answer:	I looked on Weather Tech's website.....it appears that the $34.95 + $8.00 ground shipping adds up to the $42.95 that is advertised by this vendor.......ends up costing the same......you will probably end up getting it earlier than when ordering directly from Weather Tech

Product features

Safer hands free driving

CupFone is a mobile phone holder that sits conveniently in any vehicle’s cup-holder. Fully adjustable tilt and rotation allows you to easily see your favorite app like Navigation or Waze when on the road. Convenient cut-out allows for charging on the go!

Adjustable

Easily adjusts to accommodate your cell phone with a single easy-to-turn knob. Once adjusted your phone slides in and out with easy, no springs or magnets.

• Regular CupFone fits most phones and cases, up to 3.375" wide
• CupFone XL fits large phones with thick cases, up to 4.11" wide

A second easy-to-turn knob allows rotating for the perfect viewing angle.

Find Your Fit

Interchangeable base cups allowing you to find the perfect snug fit for your vehicle's cup-holders. Each base cup features a whole in the bottom which allows the included tool to separate with ease.

Just 'click' together the cups you need and store the others for use in rental cars, golf carts or any other cup holder!

On The Go

Fits virtually any cup-holder so you can take with you in your truck, utility-vehicle, lawn mower, golf cart, boat or RV. You never have to search for your mobile phone again, because you always know where it is.

• Maps & hands free navigation while driving your car, truck or SUV
• GPS and score card while golfing
• Secure your phone while working

• UPGRADED VERSION: Thank you for our customer who feedback the problem about the base too small could not fit the bigger cup holder and the knob is hard to turn. Be assured that TOPGO always take customer experience as first concern, so we release this Upgraded Version immediately to solve the problem. Now you can purchase confidently.
• SIMPLE TO INSTALL: Cup holder phone mount is Adjustable and fits firmly and perfectly，securely in the cup holder for car, truck or SUV, fitting to varying size cup holders in your vehicle.
• ADJUSTABLE GOOSENECK: Up to 8 inch long neck, makes it easier and flexible to operate and access your mobile phone. You can adjust the height as you like, achieve maximum flexibility.
• UNIVERSAL CELL PHONE HOLDER: Suitable for all types of 2.01' - 3.54' wide devices, such as iPhone 11 XS/x/8/8 Plus/7/7 Plus/6 Plus, Samsung Galaxy S9/S8/S7/Note8/Note9 , Huawei, HTC,LG, GPS,PSP etc.STRONG AND DURABLE: Made with an adjustable heavy base and durable plastic, the phone holder will securely lock in your cup holder. Holder has extended arms for wider depth and longer length, 360 degree rotation for desired position vertical or horizontal mode.
• NOTE: Phone holder can not fit the phone with battery case, support maximum 0.51" thickness device,The maximum size of the Phone cradle-holders base is the diameter 4“, Please carefully compare the size of the car cup holder and the product before purchase to ensure that this product can be placed in the car cup holder.SECURE GRIP & ANTI-SLIP SURFACE: The curved arm and 2 holding feet provide all-round protection for your phone. Soft sponge cushions protect the devices from damage.

Product features

TOPGO Cup Holder Phone Mount Universal Adjustable Gooseneck Cup Holder

Reasons you should choose our TOPGO Cup Holder Phone Mount:

Highest quality, innovative design, and easy to install.

Awesome Solution for Driving with a phone, you need not worry about the phone holder that connects to the windshield since it bounces.

Flexible mount that allows different views if needed, such as when the sun hits it, reflections, etc.

Happy or not happy about our products, our friendly team are always waiting for you to connect with us.

Keep Your Dash and Window Clean

At innovative design, our TOPGO Cup Holder Phone Mount will not obstructs your view when you driving, you do not have to affix anything to your dash or window, just simply put it in your car cup holder and fix

Easy to Install - Step 1

1. Hold the phone holder upright, Insert 4pins from the gooseneck bracket into 4 holes in the back of the phone holder (as the photo below)

2. Push the bracket up until you feel it "click"

Easy to Install - Step 2

Place base of phone holder assembly in the vehicle cup holder.

Easy to Install - Step 3

Twist knob on top of base clockwise to tighten and counter clockwise to loosen.

Easy to Install - Step 4

Press the top button on the phone holder to expand the clips.

Position bottom clip on the bottom of the phone.Squeeze side clips to hold the phone

• Upgraded Vent Clip: Features a stronger, larger vent clip and an innovative support frame to provide extra support, it can hold your phone securely on an air vent in your car
• Upgraded Phone Cradle: Design with a larger cradle to keep your phone stable in place. With the instant release button, you can push the phone cradle arms in to secure your phone and press the button to release
• Ideal Viewing Angle: A 360° rotating and pivoting ball joint allows you to adjust and quickly switch between portrait and landscape view
• Adaptable Attachment: Features a 3-levels locking knob to easily and firmly fix the air vent mounting grip on your car air vent
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold my Galaxy S
Answer:	It can be used on any phone smaller than 6.5 inches, so it can definitely be used on your Galaxy S8
Question:	How many magnetic plates come with the product
Answer:	There are two magnetic plates.
Question:	will this work with a small phone like the original iPhone SE, or new iPhone 12 mini
Answer:	It worked . ihave iphone 12
Question:	Can I remove placement and place somewhere else
Answer:	Yes, you can remove the holder to wherever you want to set. The viscose of the pedestal could be reused after you wash it by warm water.

Product features

AUKEY Car Phone Mount

• Upgraded Stronger Air Vent Hook Clip, flexible fit to attach to thicker or thinner air vents.
• Firmly holds your smartphone or GPS.
• 360-degree rotation for the ideal viewing angle.
• One-button phone release.
• High-quality materials and finish.

The phone cradle release button has been relocated to the top at the back for easier access and smoother phone retrieval. The phone cradle has also been improved to hold your phone firmly even on the most bumpy roads.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint.

Upgraded Stronger Air Vent Hook Clip

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Adjustable Phone Rest

Extends to fit bigger phones. Four positions to choose from.

Keep Your Case On

Fits regular phone cases too.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Upgraded Mount

With a larger cradle and stronger grip, it can hold your phone firmly in place even for a big one.

Step 1

Flip the grip release knob to the widest air vent mounting grip gap. Clip the mount on your car’s air vent and then flip the grip release knob to to lock.

Step 2

Press the phone cradle release button and adjust the phone rest so that your phone is positioned at the right height in the mount.

Step 3 Press the BACK EDGE

Press the BACK EDGE of the cradle arm tips to push the phone cradle arms back in, so they grip your phone securely.

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Auto Retractable Phone Clamp: Hands-free and super stable. No switch, no magnet, only smart mechanism. Simply put in/take out your phone in just one second. No complicated operation, most safe car phone mount for driving.
• Maximum Angle Adjusting: This Ipow car phone holder can be adjust by 3 knots, 360 degree rotation joint ball, 180 degree rotation clamp and 120 degree rotation arm. Easily find your perfect angle. No view blocking, no distraction, no danger.
• Versatile Reusable Phone Mount: With the ultra-strong sticky suction cup, this cell phone holder can be used both on dashboard and windshield. The suction cup is washable and reusable by rinsing it under warm water and let dry. We even designed an uninstall tab for easy moving.
• More Features and Broad Compatibility: It also features simplistic installation,special phone support feet with groove for small phones, durable high quality material, trendy outlook. Compatible with most smartphone with width from 2.4’’ to 3.45’’ including iPhone XR, XS Max, 8+, X, 8, 7, 6s, 6, Galaxy S10, S10+, S10e,S9 S8 S7, S6 S5 Note 9 8, LG G6, HTC and more.
• Hassle Free After Sale Service: Our phone mount is tested in real life for thousands of time. The more we do, the better product you get. Any issue, please contact us via email to enjoy an efficient solution. No More twice think. Add to Cart Now!

User questions & answers

Question:	What’s the diameter of the round suction cup and the 3M adhesive dashboard pad
Answer:	It is around 3 1/4 inches. Very nice product. Frequently bought together and well works with 🌈🌈Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter. High-end Car Music Player 🌈🌈
Question:	Can I both use it on windshield and dashboard
Answer:	Yes, it can be used on both dashboard and windshield. Dashboard the best. Because it can bend down which contributes to a no blocking driving view.
Question:	Can it hold samsungs with popsockets
Answer:	Nor based on the one I received...I have an Otter case and the device just hold the phone. Popsockets are thicker than Otter cases.
Question:	Will it hold the phone horizontally? Or is it just at a regular orientation
Answer:	It can be rotated to be sideways to hold the phone but it might not be secure enough to stay in place. Maybe if you aren’t moving and only parked will it stay in securely.

• Andobil Multifunctional Car Phone Mount: With the latest improved suction cup and vent clip [ stronger & tighter ], this cell phone holder can hold your phone firmly on dashboard windshield or air vent, even on the bumpiest road. Better yet, it comes with a 2-step locking system, which provides more reliable attachment to your car.
• Easy One-Touch Operation: Just a simple touch to mount or remove your phone within seconds - Super easy to use while you drive. It also features an adjustable foot, making this car mount universal for any cell phones up to 7”. Compatible with iPhone/ Samsung Galaxy/ LG/ Pixel, etc.
• Extreme Flexibility: Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. For added convenience, it has an extendable long arm to keep your phone always in view - And ready for hands free calls, GPS navigation & music streaming.
• Better Design Than Ever: Andobil phone holder for car is made with the most superior ABS plastic and anti-scratch cushion, which ensures full protection of your beloved phone. Moreover, the sturdy arm and stable ball joint can increase its durability. You won't need to worry about your phone falling anymore.
• What You Get: Andobil car phone mount *1, improved suction cup *1, upgraded air vent clip *1, dashboard pad *1, user manual *1. They are fully protected in exquisite package. It will bring an easy and safe driving experience to you and someone you care about.

Product features

Andobil Car Phone Mount

Meet Easy Clamp 2.0 - Andobil car phone mount 2nd generation. After so many tests and redesign, we've improved it to the best version ever. Andobil team has studied all the feedback to make it ideal for your daily drive.

• When it comes to a stronger suction cup, the stickier gel and thickened pad of this holder is all you need.
• With the 1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• Horizontal or vertical, closer or further. This flexible motion allows free reach to your mobile.
• Best 3-in-1 mounting solution for your car. Feel free to use it on the dash, windshield or air vent.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

The goal of this car phone holder is simple: To securely hold your phone in place, while you just keep focused on the road.

Adjustable Foot

If your phone is large size, you can pull the foot down. So our phone car mount can hold your big phone better fit.

360° Free Rotation

Full 360° rotation allows limitless possibilities, including landscape and portrait viewing.

Hassle-free Charging

Reserved space for your charging cable. Juice up your phone freely on a road trip.

Best Phone Holder for Car

Does it support all mobile phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 12/ 12 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7/ 6s/ SE,

Compatible Samsung Galaxy S20/ S20+/ S20 Ultra/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: The thickness of the phone case’s back should be less than 0.24in.

Any tips for the adhesive dashboard pad?

1. The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.

2. Before mounting the suction cup, please let the dash pad sit for 24hrs.

3. We do not recommend it for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install it on the windshield or air vent instead.

4. If the weather is getting too hot, please use the air vent clip instead.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.