13 best cell holders

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• 【Compatible range】 This lazy phone holder is designed especially for using your smart phones lying on bed or sofa. Cell Phone holder is compatible with iPhone 11 Pro Max, iPhone XS, iPhone XS Max, iPhone XR, Google Pixel, Nexus, Huawei, Galaxy S10 S9 S8 S7 S6 and other 4-6.5 inch cell phones, switch.
• 【Flexible clip phone holder】 With 360 rotation clip on holder, flexible long gooseneck arm, you can freely adjust it to your best viewing angle when you’re lying on your bed or sofa. Notice: Due to its flexible structure, there are wobbles while typing on the phone.
• 【Easy position】Distinctive dual-arm design, the thicker lower arm is to keep stability and the thinner upper arm is for easy twist. Flexible enough to twist yet durable enough to withstand repeatedly bend.
• 【Various using occasions】 Cell phone clip holder, with rubber padded clamp open maximum to 2.75 inch, can be securely mounted to bed frame, nightstand, desk, free your hands, provide you with maximum comfort.
• 【Warm Tips】This overhead phone holder for desk is only suitable for reading and viewing.If you need to type on your phone,please take it off.And please use two hands to adjust the view of the arm to promise a long time life for this gooseneck phone holder.

User questions & answers

Question:	Does it fit a Blackberry Key
Answer:	I am pretty sure your Blackberry Key2 does fits in this phone holder.
Question:	Can this be attached to a wheelchair
Answer:	Possibly as it has a clip on the bottom, depends on the wheelchair I am assumming.
Question:	How well does it grip the phone
Answer:	Grips the phone great.
Question:	Is the clip plastic or metal? I bought a similar one on Amazon and the clip was a heavy plastic and ended up with a crack
Answer:	It is plastic but really well made. I've been using it often but the clip even the whole thing is still very good condition.

• 100% Designed, Engineered, and Manufactured in the USA by WeatherTech!
• Designed using interchangeable base cups allowing you to customize the perfect snug fit.
• The adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases.
• Base allows phone to rotate 360°, adjustable for viewing from any seat position.
• Open access bottom lets you easily charge your mobile device while it is in place.

User questions & answers

Question:	Will this fit a 328i series BMW sedan
Answer:	There are 4 size cups I’m assuming it will fit a BMW I have a Chevy &we have a Lincoln SUV & they fit perfectly try it U can always send it back if it doesn’t work
Question:	This product does not fit my car cup holder. Where does the description say I have to pay return shipping costs
Answer:	When initiating the return, select "item not as described" as the reason (this is described to fit all cup holders -- it does not! (mine included)). This typically generates a no-cost return label.
Question:	Will this fit for iPhone 8 Plus
Answer:	hmm I'm not sure exactly, but it fits the 5c, the 5 s, the 8 with otter case and the 11. I have had no problems with the cup sizes for these sizes.
Question:	Why are you charging $7 more than Weathertech for the same cupfone and saying free shipping to prime members while Weathertech charges less
Answer:	I looked on Weather Tech's website.....it appears that the $34.95 + $8.00 ground shipping adds up to the $42.95 that is advertised by this vendor.......ends up costing the same......you will probably end up getting it earlier than when ordering directly from Weather Tech

Product features

Safer hands free driving

CupFone is a mobile phone holder that sits conveniently in any vehicle’s cup-holder. Fully adjustable tilt and rotation allows you to easily see your favorite app like Navigation or Waze when on the road. Convenient cut-out allows for charging on the go!

Adjustable

Easily adjusts to accommodate your cell phone with a single easy-to-turn knob. Once adjusted your phone slides in and out with easy, no springs or magnets.

• Regular CupFone fits most phones and cases, up to 3.375" wide
• CupFone XL fits large phones with thick cases, up to 4.11" wide

A second easy-to-turn knob allows rotating for the perfect viewing angle.

Find Your Fit

Interchangeable base cups allowing you to find the perfect snug fit for your vehicle's cup-holders. Each base cup features a whole in the bottom which allows the included tool to separate with ease.

Just 'click' together the cups you need and store the others for use in rental cars, golf carts or any other cup holder!

On The Go

Fits virtually any cup-holder so you can take with you in your truck, utility-vehicle, lawn mower, golf cart, boat or RV. You never have to search for your mobile phone again, because you always know where it is.

• Maps & hands free navigation while driving your car, truck or SUV
• GPS and score card while golfing
• Secure your phone while working

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones

• 【Wide Compatibility】This cell phone stand is compatible with all 4-8 inches smartphones in phone cases, like iPhone 12 mini 11 Pro XS Max XR x 6 6S 7 8 Plus, Galaxy S10+ S10e S10 S9+ S9 S8+ S8 S7 Note 10 9 8, LG, Sony, Moto, LG, Google Pixel, Nexus etc.
• 【Stable and Anti-scratch】The iPhone stand is made of high-quality aluminum alloy with a nice finish. Stable and easy to watch Youtube or FaceTime. Besides, rubber non-slip pads protect the surface of your phone case and desk from scratches.
• 【Make Your Life Easier】Using this desktop phone holder at home to prop up your phone, you can better view recipes while cooking. It's also great for on your nightstand, so no more fumbling around in the morning to shut off the alarm.
• 【Suitable Viewing Angle】The phone cradle for desk provides you with a comfortable viewing angle. Put it on your office desk, and you can see at a glace incoming notifications and calls when the phone is in silent mode.
• 【Thoughtful Detail Design】 A large hole in the back allows a charging cable to bend gracefully away. And the outer edge of this hole is beveled so that it will not cut into your cord — a perfect dock for your phone.

User questions & answers

Question:	So my samsung galaxy tablet 3 will fit on this? Can I have it on the stand & use it or will it tip over
Answer:	Hi Friend. This Phone Stand works well with 3~8'' devices. If you want a stand to holder your tablet,we have another tablet stand for you. Search:B01DBV1OKY Or Go to:https://www.amazon.com/Tablet-Stand-Adjustable-Lamicall-reader/dp/B01DBV1OKY
Question:	Does it work for Samsung Note 10 Plus
Answer:	It is a holder. I would imagine it would work for any phone, you use your own power cord. I love it. My phone sits upright or sideways. It is at a good angle to see it.
Question:	Does this block the audio port on an iphone 6s
Answer:	Yes, it does block the audio port on the 6s when upright in the stand. Turning the phone sideways is an option.
Question:	WIll an Iphone 6s plus in an Otter box case fitin this stand
Answer:	Yes,it should. The thickness of the stand is 15mm, enough to fit in your iPhone 6s plus with otter box case.Thanks!

Product description

About the product:

MAGIPEA cell phone mount is aiming at providing a convenient lazy bracket to all customer.It's flexible and easy for you to assemble and install.



The holder is long and made of Aluminium-magnesium alloy solid cord for better bending performance and longer life.It's strong enough to hold the most brands of Smartphone on the market.



Notice:

* This holder is for phones, not for ipad or tablet.

* Smartphone is not included with the product.

* Please don't place the holder directly above people and pets.

* It is designed stronger, so please use your both hands to bend the holder when you start to use it.

* The width of the clamp is about 3 inch, so we don't suggest you to hold your phone with a case on it.

* It may be a little shaking when you try to touch the phone on the holder, so you should keep the holder still after you touch the phone.



What you will get:

cell phone holder/mount * 1

• ★Universal Lazy Bracket - This phone holder fits for most brands smartphone in the market including iPhone, Samsung Galaxy, Sony, Motorola, Nokia, Huawei, HTC, LG, etc.
• ★360o Adjustable - With the maximum height of 28 inches, you can adjust the height and angle to get the best position by bending and rotating the holder. Just choose a perfect angle for you.
• ★Easy to Install - The holder has a strong clamp to hold your Phone securely. It's easy to attach on furniture such as table and bookshelf.
• ★Multiple Usage - Perfect for using mobile phone to watch movies & enjoy music in the bedroom, bathroom, kitchen, gym and office, free your hands.
• ★Use your both hands to bend it cause it is designed stronger.

User questions & answers

Question:	Why does a cell phone holder have reviews of a spice rack
Answer:	cause amazon doesn’t care
Question:	Will this hold an S8 with an otterbox case on it
Answer:	It will but it was tough getting mine in. The spring loaded holder is very awkward. There's no way to hold it open from the back side. You have to use the phone itself to pry it open and pop the phone down.
Question:	Will this hold samsung galaxy note
Answer:	Sure, it can hold samsung galaxy series and note series cellphone, Such as note 8, galaxy S9 etc.
Question:	Will this work with phone that’s has a pop socket
Answer:	Definitely not, unless your socket is directly on your phone and placed at the bottom. If you have a super thin case it might work. But a case with a pop socket- no way.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• Adjustable Angle Viewing: Multiple Angles could be adjusted (270 degree rotating) to meet your different viewing demand. Makes you hands-free to enjoy your games, videos and Facetime
• Superior Stability: We adopt thicker (3mm) aluminum material and bigger size (4.1*3*4.4 inch) to guarantee the stability
• Heavy Case Compatible: The hook is long enough to hold your device （all size cell phones） with HEAVY CASE on. And no need to take off the case when charging
• Anti- Scratch & Anti- Slippery. It is equipped with larger silicone pads to protect your device from slipping or scratch
• Excellence on details. Similar CNC technology as Macbook adopts, you could enjoy the comfortable sense of touch even on the edge.

User questions & answers

Question:	On the product pictures it says rotatle, what does (rotatle) but stable means? check the spelling and get it fixed
Answer:	Not sure, maybe the word is rotate?
Question:	Will this stand hold an Iphone 8+ with an Otterbox Defender case on
Answer:	I have an Otterbox case with an iPhone 7 plus & there is more than enough room for the iPhone & it will fit either way you choose.
Question:	Can anyone tell how does the "adjustment" work? Is thete any button to press
Answer:	No, no buttons to press. It is a friction fit so you just adjust to the angle desired. I have had mine (2 of them) for about 2 months now and so far they have stayed snug and easily hold their angle (until you adjust to a different angle).
Question:	My question is like how long will the swivel part of the stand will last before it starts to loosen up and not work anymore. Can anybody answer this
Answer:	Who would be able to answer that? I will say that the stand is substantial in weight and we'll worth the price. I've found that the swivel is very tight, smooth and reinforced, I seriously doubt that loosening will be an issue for some time unless you plan to crank it up and down excessively. With normal use I can't imagine this will loosen or become appreciably wobbly.

• 【Sturdy and Securely】For phone holder using a one-button release function design to slide put the phone in or take out easily. You can adjust the clips to fit most phones securely, car cup holder will stays locked in especially going over big bumps. It can be used with a phone case. Also, with soft interior provides comprehensive protection for your device from scratches. Cell phone holder has a space at the bottom so can keep phone charging.
• 【Expandable and Stable Base】The base can securely lock in your cup holder and you just need to twist the knob car phone mount will expand to fit the cup holder area snugly. The size of the base of the car phone mount is between 2.6-4.1inches which is larger than the base of other products, suitable for most cars, trucks and other vehicles. NOTE: Please carefully compare the size of your car cup holder before purchase, ensure that this product can be placed in the car cup holder.
• 【Adjustable Car Cup Holder】A Long Adjustable Neck car cup phone holder up to 10.8 inch, it is super sturdy. The neck can be adjusted according to needs to bend it to the best position. Also, the cell phone holder can be 360° swivel provide you with the different angles, which is convenient for looking at phone.
• 【Universal Cell Phone Holder】Suitable for all types of 2.2' - 3.8' wide devices, such as iPhone 11 Pro/11 Pro Max/11/XR/XS Max/XS/X/8/8 Plus/7/7 Plus/6s, Samsung Galaxy S10/S10 Plus/S10e/S9/S8 Edge/S7/S7 Edge/Note10/Note9/Note8/Note7/A50/A20/A10/A10s/s7 active, Google Pixel3/3 xl/4/4xl/nexus 4/5/6, Huawei p30/p20/p10/p9/p30 lite/p10 plus/mate 20 pro, LG Stylo 5, HTC, MOTO, Sony, Nokia etc.
• 【After-sales service】If you have any problem or not satisfied with the car cup holder phone mount within one year, please contact us and we will solve it always at your service. Kind Reminder:In order to reduce the friction between the two joints, please comfirm two knobs are completly released before adjusting height or direction of the product. As for the creaking sound, it is the sound of component friction, which is a normal phenomenon.

User questions & answers

Question:	Will this fit a galaxy S10e
Answer:	It should fit about anything the base is adjustable in and out for the cup holder
Question:	Will it a iPhone 11 with otterbox
Answer:	I am using it for XS Max and it’s working fine. I hope it will work for IPhone 11 as well
Question:	How tall it is
Answer:	Tall likes 10 inches
Question:	Will this fit to my iphone 12 pro max
Answer:	Yes, the device can be adjusted to fit many sizes.

Product features

Upgrade Adjustable and Durable Base

• This cup holder phone mount is suitable for vehicle cup holders between Min 2.6in to Max 4.1in in diameter. Holder has extended arms which has silicone pad to protect your vehicle cup holder.
• It sits conveniently in your vehicle's cup-holders, it's also suitable for use in trucks, boats, RVs, golf carts and other vehicles.
• NOTE: Please carefully compare the size of your car cup holder before purchase, ensure that this product can be placed in the car cup holder.

Expandable Height

The Long Adjustable Neck car cup phone holder up can be adjusted from 7.5in to 10.8in for a better view.

Adjustable telescopic neck

The neck can be adjusted according to needs to bend it to the best position.

180° for adjustment

Front and rear adjustments make it easier and more flexible for you to operate.

360° swivel for phone holder

The cell phone holder can be 360° swivel provide you with the different angles, which is convenient for looking at phone.

Step 1：

Put the base in your vehicle cup holder.

Step 2：

Twist the knob on the base to fit the cup holder.

Step 3：

Click the button behind the phone holder to expand the clip to adjust your phone can fix in the phone holder. Adjust the long adjustable Neck or phone holder with optimum viewing as you liked.

• [ Andobil Ultimate Car Phone Holder ]: With the latest improved vent clip [ stronger & tighter ], this car phone holder could hold your phone firmly even on the bumpiest road. It is the first one within the market that adapts the aviation material “PTFE”, so andobil car holder could work well for you in extremely harsh environments.
• [ NO.1 Adjustable Foot Design ]: Andobil product manager designed the first adjustable foot of car phone holders on Amazon. Avoid some cell phone power or volume button will be squeezed by the clamp arm. Compatible for all 4-7 inch smartphones, such as iPhone 12 Mini/12 Pro/11/11 Pro/11 Pro Max/XS/X/iPhone 8/8 Plus/iPhone 7/7 Plus Samsung Note 20/Note 10/S10/S10E/S9/S9plus etc.
• [ Most Comfortable Operation ]: Andobil design engineers upgraded the switch button, which not only made it easier to press it, but also made it quick to open the arm for only 0.1S. What's more, Andobil car phone brackets can withstand more than 20,000 times open&close by repeated tests.
• [ Hold Your Phone Steadily ]: Andobil phone mount holder has anti-slip rubber pads, stable support shelf, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving The smart phone will securely stay in the car cradle like a baby, which won't distract you from driving.
• [ Extreme Flexibility ]: 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view.Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. Easily lay and remove your phone using the widely comfortable phone cradle with instant release button.

Product features

Andobil Universal Air Vent Phone Holder

Meet Easy Clamp 2.0 - Andobil air vent phone holder 2nd generation. This car phone mount fits most phones from 4” to 7”. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

• Quick Release Button Technology to easily insert and remove your phone
• Adjustable bottom for larger phones.
• Tough Plastic exterior to withstand rough conditions.
• Soft padded interior to protect your phone while in the mount.

Use for Horizontal or Vertical Vents

Does it support all cell phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 11/ 11 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS max/ XS/ XR/ 7 Plus/ 7,

Compatible Samsung Galaxy S20 Ultra/ S20+/ S20/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 10/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: Thickness of the phone case’s back should be less than 0.24in.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.