12 best car kit with magnetic mounts
A car kit with magnetic mounts is an automobile accessory designed to securely hold and mount a cell phone or other mobile devices inside a vehicle. These kits use strong magnets to keep the device in place, allowing drivers to access navigation, music, and other apps hands-free while driving. Here's what you should know about car kits with magnetic mounts:
Mounting System: Car kits with magnetic mounts typically consist of two main components: a magnetic holder and a mounting base. The holder attaches to the mobile device, while the mounting base is fixed to the car's dashboard, windshield, air vents, or other suitable locations.
Magnetic Attachment: The magnetic attachment is the key feature of these kits. It uses powerful magnets to securely hold the mobile device in place. The magnets are often enclosed in a protective casing to prevent any damage to the device.
Versatile Mounting Options: Car kits with magnetic mounts offer versatility in terms of where you can mount your device. They can be attached to the dashboard, windshield, air vents, or even the CD slot, depending on the specific model.
Adjustable Viewing Angle: Many kits have a swivel or ball joint mechanism that allows you to adjust the viewing angle of the mounted device. This ensures that you can position your phone or tablet for optimal visibility.
Easy Installation: These kits are typically easy to install and do not require special tools. Most come with adhesive pads, suction cups, or clips that allow for quick and secure installation.
Compatibility: Car kits with magnetic mounts are designed to accommodate a wide range of mobile devices, including smartphones, tablets, and GPS units. They often come with multiple magnetic plates and are compatible with various device sizes.
Hands-Free Operation: Using a magnetic car kit helps promote hands-free operation of your mobile device while driving. This can enhance safety by reducing distractions and the need to physically handle your phone.
Wire Management: Some kits include features for managing charging cables, ensuring they are neatly organized and accessible when needed.
Compatibility with Cases: Many magnetic mounts are designed to work with mobile devices that have protective cases. Some kits even come with adhesive metal plates that can be attached to the back of the case.
Removability: These kits are often designed for easy removal, allowing you to take them from one vehicle to another or switch between different mounting locations within the same vehicle.
Adherence to Local Laws: When using a car kit with a magnetic mount, it's important to adhere to local laws and regulations regarding the use of mobile devices while driving.Some areas may have restrictions on where and how you can mount your device.
Car kits with magnetic mounts have gained popularity due to their ease of use and the convenience they offer for drivers who need to use their mobile devices for navigation and other purposes while on the road. However, it's essential to prioritize safety and use these mounts responsibly, keeping your focus on driving whenever possible.
Below you can find our editor's choice of the best car kit with magnetic mounts on the marketProduct description
The beauty of the Steelie Dash Mount Kit is in its simplicity. Using trusted Steelie magnetic mounting technology, this popular phone mounting system lets you be hands-free so you can keep your focus safely on the road. This all-inclusive kit includes one Steelie Magnetic Phone Socket with 3M VHB adhesive, one Steelie Dash Ball with 3M VHB adhesive, an alcohol prep pad, and easy installation instructions. The 3M VHB on the Dash Ball allows it to be secured to just about any smooth, hard, flat or vertical surface in your vehicle. The Magnetic Phone Socket also uses 3M VHB, so it adheres steadfastly to your phone or rigid case, but can be removed if you get a new Apple iPhone, Samsung Galaxy, Google Pixel, or other phone or case. The socket features a powerful neodymium magnet and a smooth silicone ring that articulates with the steel ball on the Dash Mount. This allows your device to be tilted and viewed in landscape, portrait, and everything in between. This design ensures the phone stays securely in place, until you detach it from with a simple twist or tug. Speed bumps, potholes, quick turns are no match for Steelie's magnetic holding power. Because of its fumble-free, secure design, the Steelie Phone Mounting kits are legal in all 50 United States. Plus, when you reach your destination and detach your phone, the Magnetic Phone Socket on your device means you can still attach it conveniently to other metal surfaces: refrigerator doors, metal shelving, other Steelie Mounts, and more. Steelie neodymium magnets are safe for use with mobile devices but should be kept away from magnetically sensitive objects like credit cards, pacemakers or computer hard drives.
- MAGNETIC CAR PHONE HOLDER FOR YOUR DASH, HANDS-FREE VIEWING - Dock your phone to your dashboard in a snap, with a sleek and compact design using Steelie magnetic mounting technology. Secure just about any phone to most any car dash
- UNIVERSAL, SECURE ATTACHMENT TO PHONE, CASE, AND CAR - The Magnetic Phone Socket with 3M VHB adhesive secures to most any phone or rigid case. Stays on as long as you want, but can be removed. The Dash Mount is also equipped with 3M VHB adhesive
- ADJUSTABLE VIEWING ANGLES - The Dash Mount features a steel ball that articulates with the Steelie Magnetic Phone Socket on your device allowing you to tilt your phone smoothly from landscape to portrait and everywhere in between
- POWERFUL, HIGH-STRENGTH MAGNET - The neodymium magnet and silicone center create a strong grip and smooth glide when paired with the Steelie Dash Mount for safe use even when driving on bumpy roads
- SAFE FOR USE WITH PHONES - The powerful magnet will NOT damage your mobile device. It can also be paired with GPS and MP3 devices. However, do not place it near magnetically sensitive objects such as credit cards, computer hard drives, or pacemakers
- WORRY-FREE GUARANTEE - all Nite Ize products are backed by our Worry-Free Guarantee
User questions & answers
Question: | Cant't find crucial info - what are the measurements of the disc that attaches to your phone? Diameter and thickness would really be helpful |
Answer: | Diameter 3/4" and thickness 1/8", very nice product. Frequently bought together and well works with đđ Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player đđ |
Question: | Has anyone used this on a motorcycle, cell phone mounts I have seen on motorcycles are big and not very attractive |
Answer: | I have not used it on a motorcycle but I have put it on the side of my car while loading my bike on the roof rack & kinda forgot it. when I got home my phone was right where I left it on the outside of my car (despite freeway speeds of up to 80mph for just more than an hour). I'm pretty happy with this. (I have the iphone5) |
Question: | does the strong magnetic field generated by the magnet interfere with the iphone internal compass? can the steelie permanently damage the iphone |
Answer: | They claim it will not damage the iPhone, I haven't used it long term though. As far as the compass, my compass never worked inside the vehicle BEFORE I bought the Steelie. Sometimes my iPhone 7 compass would be a full 45° to 90° off inside the truck. |
Question: | Magnets. How do they work |
Answer: | If you are asking how magnetism works, no one *really* knows. There are some theories which are well-supported by evidence, but they don't fully explain the phenomena. It's in the same category as gravity in that sense. The answer from April 2017 by Michael is entirely wrong; no scientist anywhere thinks that magnets themselves work based on anything to do with the north and south poles, as magnets work in the vacuum of space, far from those poles. I suppose there *could* be a connection with the N&S poles in terms of what causes certain materials on Earth to BE magnetic, but they operate independently of the N&S poles, regardless of their magnetic property's origin. |
- ă4-Pack Replacement Kitsă4.5cm*6.5cm rectangular metal plate x 2 Pieces,round metal plate with a diameter of 4cm X 2 Pieces
- ăMaterialăThe product is made of high-quality manganese steel material and the matte surface is easier to clean than ordinary ones.
- ăThin&PracticalăThe thickness of the product is only 0.5mm, which is light and practical.The metal plate is very thin and light.3M adhesive works well and is easy to install.
- ăUse For Magnetic MountăMetal plate is mainly used for magnetic phone support, it without magnetic.3M adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone.
- ăTipă The metal plate do not with magnetic.The metal plate is design for magnetic car phone holder and can work well for it.
User questions & answers
Question: | Anyone know the exact dimension of the circular plate (diameter)? I want to stick it on the back of my pop socket |
Answer: | Just measured it, itâs at 1.6 Inches or right at 4 centimeters. |
Question: | How thick are these plates |
Answer: | Thinner than a quarter it sits pretty flush on my phone case. |
Question: | is this a magnet or just a metal plate |
Answer: | Just the plate. I bought this because I still have the magnet in my car, but my metal plate is on my old phone. This is a good product for those in need of new plates. |
Question: | Can i stick this plate on the inside of my phone case rather than from the outside |
Answer: | Yes you can. Thatâs where Iâve had mine for months and havenât had a problem! |
- â â 3 Years Supportâ â : Syncwire car mount comes with 3 years support. If the phone holder doesnât hold your PHONE, missing accessories, broken, cannot be used for your car. You are welcome to get a replacement. âNOT fit with: Thick cases such as Otterbox, Wallet Case and Battery Case.
- â¶4th Generation Neodymium Magnetsâ: Easily support all smartphones even with varied phone cases on, compatible with most phones including new iPhone 12 Pro Max/12 Pro/12/11/Xs Max/XR/XS/X/8 Plus/8/7 Plus/7; Galaxy Note10+/Note10/S10/S10e/S10+/S9+/S9/Note 9/Note 8/S8; Pixel/Nexus; LG; OnePlus; Xiaomi; Moto and more.
- â¶Solid Alloy Bodyâ: Crafted with aluminum alloy and soft silicone, the magnetic car holder has an smooth surface to maintain its glowing surface and soft yet durable touch.
- â¶Super Stick Forceâ: Reliable 3M VHB adhesive pad provides strong stick force. Sturdy in various situations such as sudden braking, going over a speed bump, and driving on a rugged mountain road.
- â¶Freely Adjustableâ: With a solid metal ball joint, you can rotate your smartphone or swivel your display to your preferred position as you like. A small cell phone car kits for your beloved car
Product features
Step One
Wipe the targeted installation surface with the alcohol pad provided and wait for 30 seconds till it is dry. Please do not touch the gel with your fingers.
Step Two
Peel off the 3M pad. (Warm the 3M pad with hot air for about 15 seconds if the temperature is lower than 15âž°C).
Step Three
Press down on the mount with force for about 10-20 seconds to strengthen the attachment.
Step Four
Do not use the mount within 24 hours. If the pasting is not firm due to improper pasting, the adhesive can be replaced.
Product description
[2 Pack] Magnetic Phone Car Mount ,360° Rotation, Super Strong Magnet, Safeness & Comfort, Stylish Universal Magnet Holder, with 3 Metal Plates
phone holder for car , car phone mount , car phone holder , car mount , cell phone holder , car holder , car cell phone holder , phone car mount , phone holder for desk , phone magnet car mount , magnetic car mount , car mount holder , car phone mount magnetic , cellphone holder car , car magnetic phone holder , phone car holder , mobile holder for car , gps holder for car , magnetic phone mount , magnet car phone mount , car cell phone mount,magnetic phone car mount,magnet phone car mount,phone car magnet,magnetic phone mount,phone magnet car mount,car phone magnet,car magnet phone holder,magnet car phone mount
360° Ratation Magnetic Car Phone Mount. Adjustable full 360-degree rotation for the perfect viewing angle.
Safeness & Comfort, the magnetic car mount is absolutely safe,the strong magnet won't have any adverse effects on your cell phone.
Ultra Stable Dashboard Magnetic Car Mount. Super strong 3M VHB glue provide powerful adhesive force between car dashboard and car mount,sticks to any flat surface,to help keep your device in place, regardless of road vibrations or impacts,you can have your hands free at any time in the driving.
Universal Car Mount. This magnetic cell phone car mount is compatible with for iPhone se 11 pro 11 XS Max XS XR X 8 7 Plus, 7, 6S Plus, 6S, 6 Plus, 6, SE, 5S, 5C, 5, 4S, 4, Samsung Galaxy Note20 | 20 Ultra,Galaxy S20 | S20+ | S20 Ultra,Galaxy S10 Plus S10,S9 Plus S9 , S8 S8 Plus , S7 S7 Edge, S6 S6 Edge, S5, S4, S3, S2, NOTE 10 9 8 5 4 3 2, Google pixel 4a/4/3a/3,most smartphones, mini tablets and GPS.
Multi-scene use ,2 pack magnet mounts can be used at home and car.Package Includes:2 pack magnetic mounts, 4 pcs circular metal plate,2 pcs Strong 3M Adhesive.
- [STRONG MAGNETIC] This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction.
- [360° FREE ROTATION] With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient.
- [SUPER STICK FORCE] 3M VHB adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- [MULTI-SCENE APPLICATION] Multi-purpose car holder can be placed in the dashboard and car, desktop and any plane of the car, bringing more convenience. Easy to install, no tools required.
- [SAFE DRIVING VIEW] Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving.
User questions & answers
Question: | Where can i buy the 3M sticker that holds it to the dash |
Answer: | Any supplies store or even Home Depot |
Question: | The otter box I have for my phone is not exactly smooth. Had anyone tried this on an otter box |
Answer: | put the metal plate inside the case... I've even done this without using the adhesive (while testing a case) and the pressure will help hold it in place. I've successfully done this with with several otterbox products (and many other brands... for example, I'm currently using a spigen case and it works perfectly without exposing the adhesive sticker on the metal plate.) |
Question: | Alcatel V3 compatible |
Answer: | Just need a metal plate that they come with or like myself my case has a metal kick stand. |
Question: | If it doesnât stick to the dashboard where do you put it |
Answer: | Did you clean it and let it dry? I don't understand why it didn't stick. It should stick to anything |
Product description
Safely communicate and navigate hands-free when you hit the road with the Steelie Windshield Mount Kit. Steelie magnetic mounting technology gives you sleek, simple, and reliable way to mount your cell phone to your windshield in a snap. This all-inclusive kit includes one Windshield Mount, one Magnetic Phone Socket Plus with 3M VHB adhesive, and easy installation instruction. The Windshield Mount features an adjustable aluminum arm and suspended Steelie ball design. The adjustable arm can be easily secured to the ideal angle for your windshield. The patented suction cup features a locking lever that engages the suction cup for ultimate holding power to your windshield. It also acts as a quick release lever when you want to move it to another vehicle. The included Magnetic Phone Socket Plus features our most powerful neodymium magnet that is adhered to your device (or case) with strong, removable 3M VHB adhesive. The versatility of the 3M VHB adhesive allows it to be secured to most any phone style: Apple iPhone, Samsung Galaxy, Google Pixel, or others. The socket features a powerful neodymium magnet and a smooth silicone ring that articulates with the Windshield Mount, and that allows your device to be tilted and viewed in landscape, portrait, and everywhere in between. A smooth glide and firm grip ensures the phone stays securely in place, until you detach it with a simple twist or tug. Speed bumps, potholes, quick turns are no match for Steelie's magnetic holding power. Because of its fumble-free, secure design, unlike many other car phone holders, the Steelie Phone Mounting kits are legal in all 50 United States. Plus, when you reach your destination and detach your phone, the Magnetic Phone Socket on your device means you can still attach it conveniently to other metal surfaces: refrigerator doors, metal shelving, other Steelie Mounts, and more. Steelie neodymium magnets are safe for use with mobile devices but should be kept away from magnetically sensitive objects like credit cards, pacemakers or computer hard drives. Nite Ize has been creating innovative, solution-based products with quality, performance and value at the core for over 25 years. Based in Boulder, Colorado, we aim to continue offering imaginative and innovative products that make our customers lives easier, safer and more fun.
- MAGNETIC CAR PHONE HOLDER FOR YOUR WINDSHIELD, HANDS-FREE VIEWING - Dock your phone to your windshield with a sleek, secure design using Steelie magnetic mounting technology. Secure just about any phone to most any car windshield
- ADJUSTABLE ARM WITH ULTIMATE HOLDING POWER ON YOUR WINDSHIELD - The sleek, adjustable aluminum arm of the Windshield Mount features a suspended Steelie Ball and is locked to your windshield using a patented suction cup with a sure-grip reinforcement lever
- UNIVERSAL, SECURE ATTACHMENT TO PHONES + CARS - 3M VHB adhesive secures the Magnetic Phone Socket to most any phone or rigid case. It can be removed if needed. The Windshield Mount uses patented suction cup technology to lock to your windshield
- ADJUSTABLE VIEWING ANGLES - The Vent Mount features a steel ball that articulates with the Steelie Magnetic Phone Socket on your device allowing you to tilt your phone smoothly from landscape to portrait and everywhere in between
- SAFE FOR USE WITH PHONES - The powerful magnet will NOT damage your mobile device. It can also be paired with GPS and MP3 devices. However, do not place it near magnetically sensitive objects such as credit cards, computer hard drives, or pacemakers
- WORRY-FREE GUARANTEE - all Nite Ize products are backed by our Worry-Free Guarantee
User questions & answers
Question: | Does the one for the vent come in tho package or is it sold separately |
Answer: | This is not the Steelie Vent Kit. This is the Steelie Windshield Kit. If you have any other questions or concerns please call our Customer Service Team at 1-800-678-6483, M-F 8 AM - 5 PM MST. |
Question: | is this sufficiently strong enough to hold a 10" tablet with the weight of the silicon case if I cut a hole where the ring will be |
Answer: | Thank you for your question! The Windshield Mount will support the weight of a Tablet, but it will need to be securely attached to a smooth, flat, glass surface. Temperature changes may require the mount to be reattached. We also do not recommend using the Steelie Windshield Kit with a Tablet while driving; however, if you do wish to use it in this manner, please review any and all laws that are applicable regarding the use of a Windshield Mount with a Tablet. If you have any other questions, please do not hesitate to give us a call at 1-800-678-6483. |
Question: | I need more of the phone socket plus magnets (the more powerful ones). The other ones you sell are not strong enough for any our phones |
Answer: | I agree. I have found there are 2 different strength little magnets. A blue and a black. The blue is less powerful. |
Question: | will the windshield mount work with both size rings? which should I get for a 10" fairly heavy tablet to use with the mount |
Answer: | Thank you for your question! The Steelie Windshield Mount will work with either the Magnetic Phone Socket or the Magnetic Phone Socket Plus. The mount will support the weight of a Tablet, but it will need to be securely attached to a smooth, flat, glass surface. Temperature changes may require the mount to be reattached. We also do not recommend using the Steelie Windshield Kit with a Tablet while driving; however, if you do wish to use it in this manner, please review any and all laws that are applicable regarding the use of a Windshield Mount with a Tablet. If you have any other questions, please do not hesitate to give us a call at 1-800-678-6483. |
Product description
SoundBot SB360 Bluetooth 4.0 Car Kit Hands-Free Wireless Talking & Dynamic Music Streaming Dongle w/ Triple Ultra High-Performance USB Car Charger + Magnetic Mounts + Built-in 3.5mm Aux Cable
Product Description
Instant solutions to turn car stereo system into bluetooth wireless environment for hand free calls on the road and access to the music on mobile devices.
On board 3 control button functions for answering/ending call, skip/volume up,backward/volume down.
Fashionable and stylish design design provides maximum compatibility to the vehicles.
Supports Bluetooth A2DP profiles. Backward compatible with previous wireless standards.
Pairs with all compatible Bluetooth enabled device such as Windows Phone, Smartphone, Android, Apple, iPhone 6, iPhone 6 Plus, Samsung Galaxy Note 4, Galaxy S5, Kindle, Kindle Fire, iPad, Nexus, Google, Tablets, Laptop, PC, & more.
Specification
Bluetooth specification 4.0 and supports hands-free profile
Dimension: 1.55" diameter x 0.5" thickness
Weight: 1.25 oz
3 Button design: MFB (Multi-Function Button), VOL+, VOL-, FWD, REV
LED Indicator Status: Blue and Red
Built-in noise reduction microphone
High-Performance cigarette lighter car charger output
In the Box
SoundBot SB360 Wiress Car Kit
Triple Ultra High-Performance USB Car Charger
Magnetic Mounting Plate
SoundBot Wearable Clip mount for Enhanced Call Quality & Mobilized Placement
SB360 user guide
- Universal Wireless 4.0 wireless technology with backward compatibility & A2DP profile for Smartpohne, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players
- Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required
- Comes with a FREE Triple Ultra High-Performance USB Charger, built-in mic and 3.5mm AUX cable. Stand ready to charge additional devices at the same time
- On board multi-function, previous, and next buttons for intuitive control command with easy access & simple operation
- SoundBot wearable clip mount for flexible mobilization and optimal call quality placement - even for the passenger
User questions & answers
Question: | can you charge it while using it? (ie never have to worry about turning it off when you turn the car off |
Answer: | The SB360 has no battery so it can't be charged and consequently, it turns off immediately when electrical power is removed. However, if and when the power is removed depends on the car model. Some cars permanently provide power to the cigarette lighter (power) ports, even when the ignition/accessory switch is turned off. In that case if you leave the SB360's power supply connected, the power supply will eventually run down the battery. Some cars leave the power switched on to the power/cigarette-lighter ports for about 10 minutes. Some cars turn the power off (to those ports) as soon as the ignition switch is turned off.If the power is left on, the SB360 will shut down after 10 minutes of inactivity, but if you've got the SB360 plugged into a power supply that doesn't turn itself off when connected to an always-on cigarette lighter port, then the power supply itself will drain your battery even though the SB360 turns itself off. (That happened to me.) |
Question: | Does this turn on automatically when I start my car and does it connect automatically |
Answer: | Yes, it turns on automatically when USB power is turned on. If your USB port stays powered when your car is off, the SB360 will also stay powered. And yes, it re-connects automatically to your phone when the USB power comes on. |
Question: | is there engine whine |
Answer: | I have a 2009 Lexus IS250 that does not have a built-in USB port and yes, there is a whiny noise that fluctuates with engine speed. I tried several different charge adapters and got noise from the accessory and cigarette power sources. I also tested this out on our 2011 Jaguar XF that has a built-in USB port and there was no noise, so I think if you have to use a car charger (even the one that comes with this kit, because it too was noisy), just go ahead and get the adapter too. Soundbot makes a ground loop noise isolator adapter (SoundBot SB363) that completely eliminated the noise, so I can recommend it too. Once the noise issue was sorted this thing works really really well. |
Question: | does it work if you dont have an aux plug in you car |
Answer: | My car is old, and has a cassette player with no aux output. I bought this item (SoundBot SB360) along with a Phillips tape adapter (that brand works best in my car) and a 3.5mm coupler. It works perfectly. I just coil the excess cords and put them in the little shelf-cubby-thing behind my shifter...if you don't have a space like that, just add some automatic cord winders to your order to manage the excess. |
Product features
Universal 4.0 Wireless Technology
Universal 4.0 wireless technology with backward compatibility & A2DP profile for Smartphone, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players.
Multi-function Controls
On board multi-function controls for previous and next buttons for intuitive control command with easy access & simple operation.
SoundBot Wearable Clip Mount
SoundBot wearable clip mount for flexible mobilization and optimal call quality placement - even for the passenger.
Echo and Noise Reduction
Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required.
SoundBot SB360 Bluetooth Car Kit
Universal Bluetooth Wireless 4.0 wireless technology with backward compatibility & A2DP profile for Smartphone, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players, and more!
Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required!
SoundBot SB360FM Bluetooth Car Kit
Receiver adapts universal FM Radio transmitter technology with no 3.5mm audio cable or jack required to reproduce non-stop continuous full spectrum HD acoustic sound to turn car vehicle stereo system into a wireless environment.
Bluetooth Wireless 4.1 standard that is backward and forward compatible to all Bluetooth enabled media player devices with remote control capability via A2DP profile up to 33 feet of remote distance.
Featuring large on-board LED display with 10 preset stations to enable operation and change of radio frequencies at ease conveniently and quickly to match with the car FM channel.
SoundBot SB361 Bluetooth Car Kit
Standard 3.5mm audio cable for Smartphone, Android, Tablet, iPhone, iPad, Kindle, and other media players without the need of Bluetooth wireless capabilities.
For supported media player model and operating system only, iOS SIRI and Android voice command can be activated.
Product description
This Vent Mount is a component in the Steelie Ecosystem of products and is meant to be paired with a device already equipped with a Steelie Magnetic Phone Socket or with a Steelie FreeMount Bracket (sold separately) The Steelie Vent Mount is a brilliant solution for keeping your smartphone secure and visible when you're in the car - any car. The versatile Steelie Vent Mount securely clips to most vehicle vents, and is just as easy to unclip, so it can be used in multiple vehicles. Never get lost, be without your music, or without a means of communication. The Steelie Vent Mount is the ideal portable solution, designed for your convenience. Perfect for families with multiple vehicles, or those traveling and moving between different cars frequently. Crafted from machined aluminum, steel, and featuring a universal clip with a cam-locking lever, the Vent Mount is a safe, secure, and versatile way to mount your phone to your car. The Vent Mount works best with traditional, horizontally-oriented vents blades.
- PHONE VENT MOUNT FOR USE WITH STEELIE PHONE SOCKETS - This mount is meant to be paired with devices that are already equipped with a Steelie Magnetic Phone Socket or a FreeMount Bracket (sold separately) to provide a comprehensive magnetic mounting solution for your device
- SECURE VENT MOUNT CLIP - The Vent Mount features a cam locking lever that securely grips to most vehicle vents. It has an integrated steel ball that articulates with Steelie Magnetic Sockets (Magnetic Phone Socket and FreeMount Bracket sold separately)
- PORTABLE VENT MOUNT FOR MULTIPLE VEHICLES - The universal clip mechanism of the Vent Mount allows it to be moved easily from car to car. Ideal for families with multiple vehicles or for frequent travelers
- HIGH QUALITY MACHINED ALUMINUM PHONE MOUNT - The Vent Mount has a machined aluminum body, integrated steel ball and unique, secure clip
- CLIP AND GO - If you have a Steelie Magnetic Phone Socket on your device already, simply clip the Vent Mount into any vehicle you're in, and you have the perfect hands-free phone mounting solution on the go
- WORRY-FREE GUARANTEE - all Nite Ize products are backed by our Worry-Free Guarantee
User questions & answers
Question: | Why wouldn't you make it clear that the phone part is sold separate |
Answer: | No itâs nice quality |
Question: | Does the stand hold a regular sized iPad? Or would that be too heavy |
Answer: | My 0.4inch case fits in easily. The rubbers on the lower hands extend a bit. |
Question: | Does this come with the magnet for the back of the phone as well as the vent clip |
Answer: | Yes |
Question: | Does the base come with a 3m adhesive pad to mount in place |
Answer: | I'm using it with Samsung s7 . It will absolutely work with any size phone. Great sturdy product |
Product description
Color: Black
The rectangular: 6.5CMĂ4.5CM(2.56'' X 1.77'')
The circular: 4CM Diameter(1.57'')
Having a spare magnetic plate to go with your magnet mount is never harmful; after all, they are extremely useful to make the magnet mount work. This magnetic plate mount is rectangular with rounded corners that easily stick to the back of devices and the magnet mount so that the device can be securely held in place with the mount. The size of the rectangular magnetic plate is minimally larger than the device, made to assist all devices and steady mounting of them onto the magnet mount. This Ultra-thin circular plate is light and handy.
The magnetic plate for mount gadgets is very easy to set up - simply place the magnetic plate onto the back of the gadget you need to secure, attach it to the magnet mount and viola, your device will be held safely for as long as you want. The removal is also similarly easy. The magnetic plate will never scratch your device.
Instructions:
Just peal of the sticker and attached it to your phone, tablet or GPS. Or insert it in your phone case.
They are METAL, NOT magnetic plates, designed to attach your cellphone to magnetic car mounts!
NOTICE:
For the convenience of used, metal plate is made light and thin.
Don't rub the edge,keep these away from babies and children,
Don't be as a toy.
Click "Add to Cart" yellow button above and get it now for you!
- Car magnet metal plate to attach device onto magnetic mounts.
- Great to use with smartphones and tablets magnet mounts.
- The magnetic plate mount easily sticks to the back of devices for easy mounting
- Very easy to attach without a hassle.
- Works with magnet mounts designed to hold devices with the metal plate.
User questions & answers
Question: | Will these block the wireless charging on the IPhones |
Answer: | Yes, Iâve place it between the phone and case and it will not work with the wireless charger. |
Question: | will these work through the Apple iPhone 6 Plus silicone case |
Answer: | Yes. Works with all of my cases. They send you enough to put on multiple cases. On one of my thick cases put 2 stickies on it to double the magnetic pull. Hope that helps :) ï |
Question: | What metal material are these |
Answer: | Vibranium aka Unobtainium "black iron" |
Question: | Do you think this would hold up a cisco phone on a wall |
Answer: | I assume 'cisco phone' references a land line telephone and not a cell phone, if so, I would expect one metal mount to *not* work, but multiple metal mounts would probably work great. Don't forget you need a magnet that will attract/hold the metal mounts (these are not magnetic themselves). |
Product description
The MagicMount replacement kit is designed to be used as replacements or additional plates for smartphone and other multiple devices with strong adhesive for a secure hold. The compatible MagicPlates are great for use with MagicMount car cell phone holders and MagicMount Pro systems. The MagicPlates can easily be installed directly to your device, on a rugged case or behind the battery cover. The large mount plates are designed for larger devices and ensure a secure hold with a holder, while the small thin plates are perfect for small devices and tight spaces.
- REPLACEMENT KIT FOR VERSATILE USE: MagicPlates work with any device and can be used as replacement plates for a strong secure grip
- MULTIPLE MOUNTING OPTIONS: Easily attach MagicPlate magnet directly to a device or behind a rugged phone case
- COMPATIBLE WITH MAGICMOUNT: The MagicPlates can easily be used with all MagicMount cell phone holders and MagicMount pro systems
- PROTECTIVE FILM: Easy mounting and removal of the metal plates without damaging your phone
- INCLUDED IN PACKAGE: Replacement Kits Small, Medium and Large Metal MagicPlates, Protective Films and Alcohol Prep Wipes; 1 year warranty
User questions & answers
Question: | My iPhone isn't charging. Does the magnet need to be in a specific place on the back of the phone |
Answer: | It is clear if you read the description |
Question: | Can I buy just the protective film |
Answer: | I think so. Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player. |
Question: | please supply me with the current sizes of the black 2-Pack in mm |
Answer: | Thank you for your question! This particular item is just the Vent Mount. The magnet can be purchased separately (item# STSM-11-R7). Or, you can purchase the full kit by searching item# STVK-11-R8 here on Amazon or on www.niteize.com. If you have any other questions, please do not hesitate to give us a call at 1-800-678-6483. |
Question: | iPhone 12 pro max compatible |
Answer: | No, it is a desktop or table stand. it holds solid with non-slip pads under the base. |
Product features
SCOSCHE MRK2PK-UB MagicMount Magnetic Mount Replacement Plate Kit, Black (Pack of 2)
The MagicMount replacement kit is designed to be used as replacements or additional plates for smartphone and other multiple devices with strong adhesive for a secure hold. The compatible MagicPlates are great for use with MagicMount car cell phone holders and MagicMount Pro systems. The MagicPlates can easily be installed directly to your device, on a rugged case or behind the battery cover.
Versatile MagicPlates
MagicPlates work with any device and can be used as replacement plates for a strong secure grip.
Compatible with MagicMounts
Use the MagicPlates with all MagicMount cell phone holders and MagicMount Pro systems.
Multiple Mounting Options
Easily attach a MagicPlate directly to a device, outside on a rugged phone case or place inside between the device and case.
About SCOSCHE Industries
Founded in 1980, SCOSCHE was born from, and runs on our passion for cool vehicles, amazing sounds, the great outdoors, travel, motor sports, horsepower and voltage. Weâre a company of gear-heads, drivers, surfers, racers, riders, tech buffs, tech users, innovators, and relentless pursuers of perfection. We never get stuck in the past or in the mud.
Product description
The MagicMount replacement kit is designed to be used as replacements or additional plates for smartphone and other multiple devices. The compatible MagicPlates are great for use with MagicMounts and MagicMount Pro systems. The MagicPlates can easily be installed directly to your device, on a rugged case or behind the battery cover. The large mount plates are designed for larger devices and ensure a secure hold with a mount, while the small thin plates are perfect for small devices and tight spaces.
- REPLACEMENT KIT FOR VERSATILE USE: MagicPlates work with any device and can be used as replacement plates for a strong secure grip
- MULTIPLE MOUNTING OPTIONS: Easily attach MagicPlate magnet directly to a device or behind a rugged phone case
- COMPATIBLE WITH MAGICMOUNT: The MagicPlates can easily be used with all MagicMounts and MagicMount pro systems
- PROTECTIVE FILM: Easy mounting and removal of the metal plates without damaging your phone
- INCLUDED IN PACKAGE: Large MagicPlate magnet with adhesive, Small Magic Plates with adhesive, and Surface cleaning swabs; 3 year warranty
User questions & answers
Question: | So the mount fell off the dash of my car today. The glue probably failed after roughly 3 months.. Do you sell mount glue replacement strips |
Answer: | This type of magnet is not for charging a phone. Itâs for a car mount |
Question: | Why don't you make this in white for the pixel 2? :-( sad face |
Answer: | Iam not sure I understand your question. the product iare strong magnets for mounting items on a magnetic stick. |
Question: | Is it bad for your battery to attach the magnet to it so that it's hidden |
Answer: | I'd have guess. Large about 2.5", small about 1 x 1.25" |
Question: | do you have magnets to match silver iPhone X |
Answer: | Yes, these are compatible with the new iPhone Pro Max. If you have any questions regarding the placement of the plates please contact Scosche Customer Service at 800-363-4490 x1 Monday-Friday 8 AM-5:30 PM PST and Saturday 8 AM-2 PM PST. |
Product features
SCOSCHE MAGRKSRI MagicMount Magnetic Mount Replacement Plate Kit, Silver
The MagicMount replacement kit is designed to be used as replacements or additional plates for smartphones and other multiple devices. These compatible plates are great for use with MagicMounts, MagicMount Pro systems and iPhone XS Max, XS, XR, 8, 8 Plus, Samsung Galaxy S9/S9+/Note 9, HTC 10 and Google Pixel 1, 2, 3/XL. The larger plate is designed for larger devices and ensures a secure hold with mount, while the small thin plates are perfect for smaller devices and tight spaces.
Versatile MagicPlates
MagicPlates work with any device and can be used as replacement plates for a strong secure grip.
Customizable with Mobile Holders
Great for a seamless color match between the MagicPlate and your iPhone 6/6S, 6 Plus/6S Plus or iPhone 7/7 Plus.
Multiple Mounting Options
Easily attach MagicPlate directly to a device, outside on a rugged phone case or place inside between the device and case.
About SCOSCHE Industries
Founded in 1980, SCOSCHE was born from, and runs on our passion for cool vehicles, amazing sounds, the great outdoors, travel, motor sports, horsepower and voltage. Weâre a company of gear-heads, drivers, surfers, racers, riders, tech buffs, tech users, innovators, and relentless pursuers of perfection. We never get stuck in the past or in the mud.
- â«ăUltra-Stable Car HolderăThis Bluetooth Car Kit is designed with magnetic Car phone mount, which has 360° rotation feature, so it can be flexibly and stably fixed on the Dashboard, easy to adjust the visual angle of your phone with one hand, very convenient for you to use GPS during driving. On the other hand, the mount is built in 6 strong magnets to keep your phone always stay securely.
- â«ăQC 3.0 Car ChargerăDesigned with Quick Charge 3.0 and smart 5V/2.4A dual USB ports, Built-in smart IC will automatically match optimal current. QC3.0 USB charges compatible devices up to 4x speed of the conventional car charger. Built-in over-current, over-voltage, intelligent temperature control and short circuit protection.
- â«ăPower Off & Hands FreeăJust long press last song key to power off FM and Bluetooth functions keep charging function, no need plug or unplug it out from your car socket every time, saving your battery power. This Bluetooth FM transmitter is also a safe design and suits for hands-free law. Loud voice report Incoming call and never miss any important phone call. Our FM transmitter with highly sensitive microphone enables you communicate with others easier and switch to a private call.
- â«ăCrystal Clear Music from 2 SourcesăOur Wireless FM Radio Adapter supports Bluetooth and TF card (Max 64GB Memory). Adopted Latest technology with Bluetooth 4.2, A2DP function, advanced interference and noise cancellation technology - CVC technology creates full duplex sound and suppresses noise and wind.
- â«ăIdeal ChoiceăChoose our Qidoe and you will get: 1 x Car Phone Mount Bluetooth FM Transmitter; 2 x Metal Plate;. 60-day money back and 3 years replacement plus lifetime technical support.
User questions & answers
Question: | Do you have to attach a magnet to your phone for it to stick |
Answer: | The same thing will happen with the glue mounts, so I wouldn't waste your money. I bought the replacement "tabs" and they failed within 3 months also. I had my phone drop off while I was driving down the road. I want as not very happy since I had just put it on about a week before. |
Question: | Having trouble connecting to my phone via Bluetooth. Any troubleshooting tips? I cant tell if the actual transmitter is in sync mode instruction not c |
Answer: | That question should be directed to Scosche. Not the retailer. |
Question: | Can magnetic suction hold cell phones firmly |
Answer: | Magnets will not affect the battery |
Question: | Will it work with iPhone |
Answer: | I cant answer that, not the seller. I believe only in black, but check. Its not that big a deal in black, I just stick it in my phone case, you dont see it. |
Product features
Multi-functional
- Magnetic phone holder with Strong Suction Cup and Reusable Gel;
- Dual USB Ports: QC3.0+5V/2.4A, with replaceable 4A fuse;
- Pair with all Bluetooth enabled devices and TF card (upgraded Max 64GB);
- Switch to Hands-free mode automatically, built-in microphone with CVC technology offers you a clear talking;
- Long press LAST song key to power on or off the product, long press NEXT song key to switch the modes between the Bluetooth and Micro TF card reading;
- Long press spin button will activate the Siri or Google function automatically.
Strong Suction Cup with Reusable Gel
Please clean the dashboard and mount the suction cup on the dashboard. Please push the suction cup harder against the flat surface and push the locker twice to the bottom to ensure the stability, the gel on the bottom is reusable, you can wash it with warm water and let it dry naturally and then press and lock it again.
Hands Free Calling
Built-in microphone with noise suppression (CVC) technology, provides you with crystal clear call. Answering/redialing/rejecting or hanging off calls just simply click one spin button. Automatically switches between music and incoming calls, drive more safely.
Wide Compatibility
Bluetooth Car FM Transmitter can be paired as a hands-free kit with all Bluetooth enabled devices, such as iPhone, iPad, iPod, Tablet, Samsung, HTC, Sony and other Android Smartphones; Stream music and calls directly from your mobile devices to car stereo system via FM radio signal.
Ultra Safe Holder
Creating a powerful 1.5kg/3.3lb magnetic field, holding your phone(screen sizeâ€7 inch) securely through every bump on the road. Easily insert or remove your phone while your other hand is on the wheel, and rotate your phone in 360 degrees.
LIFETIME PROMISE
We promise Qidoe Products are OFFERED REFUND or a REPLACEMENT if you are not satisfied with the product.
Packing Contents
1 * Car Charger with Phone holder
2 * Metal Plate
1 * User manual
1 * Replacement 4A fuse
2 Music Playing Modes
With this Bluetooth car adapter, you could enjoy music via 2 methods: Bluetooth & TF card .
Specification
Wireless Version: 4.2
Match name: T16
Music format: MP3, WMA, WAV, FLAC
Transmit Distance: about 3 meters
TF card (Max capacity): 64GB
Product weight: 125g
Product description
This Universal Car Mount Accessories Pack uses unique adhesives Life Extending Packaging.
It lets you store your spares as long as you need it with an absolute confidence that included adhesives will be in the perfect conditions when you need them in a year or even two.
WE HAVE THE RICHEST PACKAGE BUNDLE:
6 x 3M VHB stickers for the dashboard base
2 x Large UltraSlim Metal Discs
2 x Small UltraSlim Metal Discs
2 x UltraSlim Metal Plates (perfect to place under the case)
4 x 3M stickers for the mount's magnet Disks
2 x Alcohol Pads with CAW.CAR Accessories special formula (safe and more efficient)
We love our customers and stand behind our products! This item is covered by our unbeatable Customer Satisfaction Guarantee. If for whatever reason you are not happy with your purchase, we'll take care of any issues until your full satisfaction or refund you every penny!
- The richest magnetic car mount Accessories Kit, includes everything you need!
- Universal and suits all magnetic cell phone and gps car holders
- Smartphone disks (Pop Socket compatible!) are super thin, stylish and look awesome! No sharp edges.
- Best 3M adhesive developed especially for car mounts (reliable and safe for the surface)
- Unique Adhesive Life Extending Packaging - keep stickers in perfect condition up to 5 times longer
User questions & answers
Question: | Could you attach the small discs to your airpods and your phone and have it magnetic attached like that |
Answer: | They will provide two thin metal plates with adhesive on them. You can attach it to the phone or to the case. |
Question: | Are double sided round adhesives included in this kit |
Answer: | You have to enable Bluetooth and then scan. You should see one headphone device named T19 or Q19 in the list of devices scanned. You need to pair the phone with that device. |
Question: | Does the magnet damage the phone |
Answer: | Yes, the magnetism is very strong. We tested it and after using it for one months, it wasn't affected on the rugged road either but you better not use screen size larger than 7'' |
Question: | Will the larger magnet work through a thin case |
Answer: | I think it will if you don't use a case on it |
Latest Reviews
View all
Highland Band Saws
- Updated: 19.05.2023
- Read reviews

Apple Watch And Iphone Charging Station
- Updated: 20.06.2023
- Read reviews

Doterra Aroma Peppermint Oils
- Updated: 04.05.2023
- Read reviews

Playstation 4 Adapters
- Updated: 01.01.2023
- Read reviews

Weiman Marble Cleaners
- Updated: 14.02.2023
- Read reviews