14 best bucket organizers

Product description

The Bucketeer Bucket Tool Organizer in Brown, 10030

• Bucket Boss The Bucketeer Bucket Tool Organizer in Brown, 10030
• 3 interior loops for hammers, drills, pry bars and other long-handled tools
• Fits most 5 gallon buckets

Product description

Bucket Boss began back in 1987, when two men working on a jobsite in Duluth, Minnesota found it easier to carry their tools in 5-gallon buckets. They created the first "Bucket Boss" organizer made of canvas that fit securely around their buckets. Today, Bucket Boss carries over 100 different products that organize and hold tools in the strongest, most efficient ways. For 30 years, we have prided ourselves in creating durable products that can withstand many years of wear and tear. From our American Field Testers proving concepts in the field, to key technical upgrades in materials and design, we strive to stay ahead of the pack.

• Fits most 5 gallon buckets
• Stores car wash supplies
• Attaches to bucket exterior so inside can be filled with water and soap
• Ring holds towel/rag
• Water-resistant mesh pockets allow wet supplies to dry quickly

User questions & answers

Question:	Does if fit a 6 gallon bucket
Answer:	I have it on a 5 gallon bucket. I would think it would be ok. It has adjustable straps.
Question:	Can you dump water out with the organizer on or do you have to take it off first
Answer:	You can dump it out. The outside bottles might fall out of the pockets if the angle is too much though. Nice product.
Question:	Will this fit on the quickie 20040-4 5 gallon bucket & cleaning caddy
Answer:	This item is made to grip the ridges on a standard 5 gallon bucket.
Question:	will the side pockets be large enough for the round spray bottles by Meguiar's car care products
Answer:	I have no idea how big those bottles are. So I do not know without testing them. But my biggest bottle is 3.5 inches across round. For the bigger holes it is a loose fit. I think I could go 4 inches on some. Good Luck!

Product features

Wash Boss

The Wash Boss bucket tool organizer turns any 5 gallon bucket into an organization center for your car washing supplies. Attaches to the outside of your bucket to keep the center open for soap and water. Includes six large waterproof mesh pockets for storage, and a ring for holding a rag.

Open Center

Exterior Pockets

Fits 3-5 Gallon Buckets

Product description

Custom Leathercraft's 61 In & Out Pocket bucket pockets turns any standard 3-1/2- to 5- gallon buckets into a portable multi-functional organizer. Made of durable, ballistic polyester. With 36 triple row outside pockets and 25 double row inside pockets to organize a wide range of tools and accessories. Drill holder with side release buckle security strap. Tape loop to dispense tape without removing the roll. Deep interior pockets help you organize large handle tools. Extra layer of fabric to reinforce the rim of the bucket pockets and bar tacked at all stress points.

From the Manufacturer

Custom Leathercraft's 61 In & Out Pocket bucket pockets turns any standard 3-1/2- to 5- gallon buckets into a portable multi-functional organizer. Made of durable, ballistic polyester. With 36 triple row outside pockets and 25 double row inside pockets to organize a wide range of tools and accessories. Drill holder with side release buckle security strap. Tape loop to dispense tape without removing the roll. Deep interior pockets help you organize large handle tools. Extra layer of fabric to reinforce the rim of the bucket pockets and bar tacked at all stress points.

• HEAVY DUTY IN & OUT BUCKET: This CLC in & out bucket is made of ballistic polyester for added durability.
• 61 POCKET IN & OUT BUCKET: 36 triple row outside pockets, 25 double row inside pockets to organize a wide range of tools and accessories.
• DRILL HOLDER: This CLC in & out bucket has a drill holder with side release buckle security strap.
• FITS MOST STANDARD BUCKETS: This Custom Leathercraft in & out bucket is designed to fit most standard 3.5 to 5 gallon buckets.
• DURABLE IN & OUT BUCKET: With an extra layer of fabric to reinforce the rim of the bucket pockets and bar tacked at all stress points, this in & out bucket is ready for any job.

User questions & answers

Question:	Does it include a loop on the inside t that can be used to hold a hammer
Answer:	What? Which kit?
Question:	does it have individual little pockets for screwdriver tips
Answer:	The ceiling bracket is 7 7/8 inches long and one inch wide, with 2 mounting holes, one on each end. In the center it widens out to 2 1/4 inches to provide 2 more mounting holes across from each other.
Question:	Does the bucket come with it? Thanks
Answer:	Well it says you can use it as a wall mount.... but, well not sure I would. I mounted my to the ceiling and it does real well. If I was going to mount it to the wall I think I would go different than this mount. There are plenty of wall mounts out there that are designed for the wall, this one although it states it can be wall mounted, just not sure you would be happy with the way it's going to look wall mounted. I know I wouldn't. I recommmend looking around before mounting this on the wall. Just my opinion tho. Hope it helps.
Question:	Does it cover inside bottom of the bucket
Answer:	Yes,,, you can get mount flat within couple inches of ceiling

Product features

Tape loop to dispense tape without removing

The Custom Leathercraft 4122 bucket tool organizer is loaded with convenient time saving features. The tape loop allows you to grab a piece of tape with out removing it, keeping the tape right where you need it next time.

Drill holder with side release buckle

The 4122 bucket caddy features a drill holster with pressure release clip. Keeping you drill in place and safe. It is made from rugged, Ballistic Poly fabric providing years of service. CLC also added an extra layer of fabric to reinforce the rim of the bucket.

Covered pocket with easy access

The covered pocket on the CLC bucket organizer allows you to store you phone or other valuable items. It provides easy access as well as piece of mind. The hook and loop closure keeps valuables secure.

Thirty six triple row outside pockets

The CLC bucket tool holder has 36 triple row pockets on the outside to organize screw drivers, sockets, pliers, or any small tool. The 25 double row pockets on the inside allow you to store large tools and even help you organize large handle tools.

Product description

The Wall Control Pegboard Standard Workbench Tool Storage Organizer Kit offers maximum tool board storage versatility and strength with over 10.5 square feet of pegboard storage space. Three 16in x 32in Gray powder-coated pegboard panels combine for a total tool storage area of 48in x 32in which will accommodate many pegboard hooks. The attractive Metal Pegboards are great for heavy duty tool board storage needs due to their 20 gauge steel construction that will not warp, fray, or crack and are over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution that will last a lifetime. Wall Control metal pegboards offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by giving the user multiple options with tool board accessory selection. The patented engagement of the slotted tool board hooks included improves hook security for more hassle free tool storage. These versatile, durable, and high strength metal pegboard panels are an easy-to-use tool storage solution for any garage, shop, or tool crib. The metal pegboard panels are easy to install into studs or flat surfaces with pre-drilled mounting holes on 16in centers. A built-in frame return flange provides ample hook clearance and full access to all holes without requiring additional framework or using up pegboard holes for mounting. Mounting hardware is also included. Wall Control Pegboard Products are Made in the USA. The Metal Pegboard Standard Workbench Organizer Kit Includes: Gray Powder-Coated Metal Pegboard Panels 32 in. x 16 in. (Covers 48 in. x 32 in. when Installed), 9 in. Shelf Assembly, 6 in. Shelf Assembly, Plastic Hanging Bins with Bin Hanger, Screwdriver Holder, Hammer Holder, Assortment of (20) Additional Hooks and Brackets. Mounting Hardware is Included. Gray Pegboards with Blue Tool board Accessories. Tools and Tool Sets Not Included.

• Wall Control metal pegboard is more than 10 times stronger than conventional pegboard
• Pegboard accepts conventional 1/4in pegboard pegs and accessories
• Pegboard accepts Wall Control slotted tool board pegs and accessories
• Pegboard tool boards mount directly into studs or sheet rock with no framework required
• Pegboard features an attractive, magnetic, and durable powder-coated finish

User questions & answers

Question:	What does it include
Answer:	Hi K, yes it can be.
Question:	So the intended installation is 32 inches high by 48 inches wide? One reviewer said they can't be turned because the pegs will not work
Answer:	Good morning, Great question. The trapeze pro comes with daisy chains, instead of nylon ropes. These measures 70.8 inches long and 0.9 inches wide (1.8 m long and 2.5 cm wide). Please have in mind we suggest that the trapeze hangs about hip height so that you can get in and out without difficulty. If there is anything else we can help you with, please be sure to reach back out, we are truly happy to help. All the best, YOGABODY Customer service
Question:	What is the recommended space to leave behind the pegboard for insertion of the hangers
Answer:	Good Afternoon, We only have available this color, it is dark grey. Let me know if there is anything else I can help you with. YOGABODY Customer Support.
Question:	what accessories come with this set? any idea where to get the socket holder and others in the photo
Answer:	The YOGABODY ceiling hooks have 2 holes. Thank you!

Product features

Wall Control Storage Systems

Wall Control's patented line of American Made metal pegboard products will last a lifetime while offering the highest quality tool storage available and at an exceptional value. From the Garage to the Tool Room to the Garden Shed, Wall Control's heavy-duty wall-mounted pegboard organizers have your storage and organization needs covered. End your frustration with inferior storage systems today and invest in an American Made Wall Control Storage System that is engineered for life.

Accepts Conventional 1/4-inch Pegboard Pegs

Wall Control's Metal Pegboard panels accept conventional 1/4-inch pegboard pegs in addition to Wall Control's more secure slotted pegboard pegs. This patented pegboard storage system offers maximum versatility by allowing you to utilize your old pegboard pegs and Wall Control's more secure slotted hooks, brackets, and shelving systems. A couple of things to note here, you can also use 1/8-inch pegboard pegs and accessories but they will fit much looser as these holes are designed for 1/4-inch pegboard pegs. There are many manufacturers of conventional pegboard pegs and we cannot guarantee every one will work with these panels so please be sure to check with the manufacturer of the peg hooks if they are not made by Wall Control. 1/4-inch Pegboard Pegs are not included with this Wall Control Pegboard Kit.

Accepts Wall Control Slotted Pegboard Pegs

Wall Control's Metal Pegboard panels accept all of Wall Control's patented slotted pegboard hooks, brackets, and shelving assemblies. Wall Control's patented pegboard system does not limit the user to one proprietary set of pegboard accessories but instead offers many options. It is true, Wall Control's proprietary slotted system does out perform all other conventional pegboard peg systems but if you just love those little round pegs, feel free to use them. However, if you want to upgrade to Wall Control's First-in-Class Slotted Hook Accessory System then your panels will be ready when you are. You can upgrade all at once or one hook and panel at a time as your budget and needs dictate. That is the beauty of the Wall Control Pegboard Storage System. This Standard Workbench Pegboard Organizer Kit includes an assortment of Wall Control Slotted Pegboard Accessories.

Product description

Bucket Boss began back in 1987, when two men working on a jobsite in Duluth, Minnesota found it easier to carry their tools in 5-gallon buckets. They created the first "Bucket Boss" organizer made of canvas that fit securely around their buckets. Today, Bucket Boss carries over 100 different products that organize and hold tools in the strongest, most efficient ways. For 30 years, we have prided ourselves in creating durable products that can withstand many years of wear and tear. From our American Field Testers proving concepts in the field, to key technical upgrades in materials and design, we strive to stay ahead of the pack.

The Bucket Boss 15051 Bucket Stacker files fasteners into their own compartments and stacks into any standard 5-gallon bucket. Sort screws, nails, nuts, bolts, fitting, and other parts in four different compartments, and stack up to five stackers on top of each other. It includes a handle, drill bit sizer, measuring rule, and a holder for your pencil.

From the Manufacturer

Bucket stacker. Stackable bucket trays end frustrating trips back to the shed or truck by creating a fastener filing system. Organizes screws, nails, nuts, bolts, or any small items. Stack multiple units in a standard 5 gallon pale. Made in USA, stacker depth is 2-3/4in.

• Nests 4 deep in most 5 gallon buckets
• Center holes for storing drill bits
• Molded center harry handle
• 4 compartments for small parts

User questions & answers

Question:	Can a lid still properly on the bucket with these inside
Answer:	if you don't overfill any of the layers. They will rest on top of each other with the handles perpendicular, and will fill the bucket ever so slightly bigger than the lid. However, if you do one of them where they are straddling each other, there's plenty of room for a lid.
Question:	How many trays are included? $8 seems steep for a single tray
Answer:	When I purchased it was priced per tray (this was awhile ago, and the price was less than it is now). I have to admit that they work really well, though I'm not sure I'd think $8 per tray would be worth it.
Question:	can these be used with the gama seal lids
Answer:	I have the same question. I'm looking at a lid now, and the ring that attaches to the bucket reduces the overall diameter. Might try it anyway.
Question:	I want 8 or ten of these, but dont want to spend $6 each to ship to 18343 zip. How much will it cost to ship
Answer:	Search for ASIN # B00002243J (its a 4 pack) and choose Torcarr Distributors. You'll save some money on the product and shipping.Happy shopping.Customer Service

Product features

Bucket Stacker

Small parts organizer tray fits inside most 5 gallon buckets. Equipped with 4 compartments, as well as a molded center handle. Up to 4 Bucket Stackers can be stacked and stored in one 5 gallon bucket.

Product description

Perfect for ice, shore and Pier anglers, Plano 725 bucket top stowaway organizer fits on top of standard 5-gallon buckets to create convenient storage from what would otherwise be wasted space. Designed with two levels of storage, the top level has two, six-compartment tackle trays ideal for weights, bobbers and other tackle. Remove the top storage tray to reveal a larger bulk storage space with a cut-out detail that when removed provides access to the interior of the bucket allowing the 725 bucket top stowaway to be used as a live bait bucket, too

• Plano Tackle Storage | Protecting your passion since 1952
• Make good use of otherwise wasted space with the Bucket Top Organizer | Fits most standard 5-gallon buckets (bucket not included)
• Two layers of storage | Top layer features fixed compartments ideal for organizing small items | Second level offers large storage area and cut-out detail
• Removable bottom provides bucket access | Clear flip-up lids for easy identification and access to contents
• Made in USA
• 18 Compartments for Gear and Baits
• Removable floor for bucket access

User questions & answers

Question:	How many inches deep is the part that goes into the bucket? I have a bunch of stuff in the bucket already
Answer:	About 3 or 4 inches max
Question:	It says a pack. Does that mean one
Answer:	Yes, pack sizes available are 1, 2, 3, etc
Question:	Does the bucket handle still operate
Answer:	Yes it works very well with the design of the lid. Helpful hint I found that if you cut thin foam sheets (like paper) an line the inside of the lid your tackle takes less of a beating.
Question:	can you remove the dividers
Answer:	As far as I know the dividers are not movable however when you remove the top tray you'll notice there's a storage compartment underneath on one side of the bucket I cut out the underside of that storage compartment with a utility knife allowing me to lift out the tray and to use the opening to retrieve live bait...

Product features

Plano 5 Gallon Bucket Topper and Organizer

Specs:

• Length: 12 in, Height: 3.75 in
• Color: O.D. Green/Clear
• Two layers of storage
• Top layer features fixed compartments ideal for organizing small items
• Second level offers large storage area and cut-out detail
• Removable bottom provides bucket access
• Fits most standard 5-gallon buckets (bucket not included)
• Clear flip-up lids for easy viewing and access

Product description

Unique ``pop-up" carrying handle, stack or nest Trays inside standard. 2-1/2" H. Stack or nest Trays inside a standard 3-1/2 to 5 gallon bucket.

From the Manufacturer

The 1152, 2½¿ High Full Round Bucket Tray from Custom LeatherCraft is made of durable lightweight plastic. With our unique ¿pop-up¿ carrying hand you can stack or nest trays inside a standard 3½ or 5 gallon bucket.

• Country Of Origin: China
• Model Number: 1152
• Item Package Dimension: 52.5" L x 10.5" W x 2.8" H
• Item Package Weight: 3.01 lb

User questions & answers

Question:	If the bucket turns over will these spill if stacked
Answer:	Yes, because the normal way of stacking is to offset layers by 45°, so that the dividing wall of the lower tray supports the "bucket" of the upper tray. There's no "sealing" between the trays.
Question:	How high is this container
Answer:	2-1/2”
Question:	What does "2?-Inch High" mean? How many of these can stack in a 5-gal bucket
Answer:	Lol 2 inch high means it's 2 inches high, not 3 or 4 but 2. Use a tape measure and measure inside of bucket divide by 2 in and you will have your answer.
Question:	how many of these will stack in a 5 gallon bucket? (no guesses please
Answer:	I have 4 in mine with the seat that has storage in it. It holds my pex plumbing in it and the pex tools sit on top.

Product description

Bucket Boss began back in 1987, when two men working on a jobsite in Duluth, Minnesota found it easier to carry their tools in 5-gallon buckets. They created the first "Bucket Boss" organizer made of canvas that fit securely around their buckets. Today, Bucket Boss carries over 100 different products that organize and hold tools in the strongest, most efficient ways. For 30 years, we have prided ourselves in creating durable products that can withstand many years of wear and tear. From our American Field Testers proving concepts in the field, to key technical upgrades in materials and design, we strive to stay ahead of the pack.

• In 1987 The Original Bucket Boss was invented on a jobsite in Duluth, MN
• 2003 - Extreme Bag Series introduced for the pro user
• 2016 - The Sling Pack is introduced, a new shape for a new generation of builders
• 2017 - ANSI & EN1150 Certified High Visibility items introduced to improve job-site safety
• 2018 - Addition of our HI-VIS line of Professional Knee Pads

User questions & answers

Question:	Are there pockets or pouches inside the bucket
Answer:	22 Outside pockets/8 Inside pockets
Question:	Can you put a lid on the bucket at the same time as the organizer
Answer:	Yes is tools don’t exceed height. See our 10010 Bucket Boss Lid

Product features

Camo Bucketeer

The world’s first bucket organizer, the original Bucket Boss. Fits any 5 gallon bucket, providing instant organization with 30 pockets for tools and 3 interior loops for hammers and pry bars, all while keeping the bucket center open for bulk storage. Made of durable 600 Mossy Oak poly ripstop fabric.

Interior Pockets

Mossy Oak Camo Print

Fits 3-5 Gallon Buckets

Product description

12 oz. Duck wear canvas dividers for easy compression of pockets; reinforced poly rip stop pockets and bottom; 19 pockets: 13 exterior, 6 interior; You can stack 3-4 of the Parachute bags into a 5 gallon bucket; rip cord closure. Size: 10" D, 6. 5" H. Tool bags Bucket Boss 19 pockets Parachute bag

• Canvas dividers for easy compression of pockets
• Reinforced poly ripstop pockets and bottom
• Stacks 3-4 deep in most 5 gallon buckets
• 19 Pockets: 6 interior, 13 exterior

User questions & answers

Question:	Want to organize my carpentry tools in a bucket, Chisels, pliers, chalk line, etc, would this work well for me
Answer:	No, I would not use this for that purpose. I would use the Bucket Boss bucket organizer. This is best for smaller items tools, boxes of nail and screws etc.
Question:	Where are these manufactured
Answer:	It is made in China. However, the quality is very good. My only compliant is that it i s a little shallow for sticking a tool or two in it (they fall out).
Question:	How large is this, after filling it with everything? Large? Small? How way of knowing from the product description
Answer:	When this product is fully cinched it stands 4 inches tall and its diameter remains the same at 10 inches. When fully filled it stands at 6 inches tall.
Question:	can you get plastic inserts with lids to keep the screws in
Answer:	You can get plastic inserts with lids to keep the screws in.

Product features

Parachute Bag

A Bucket Boss Original, the Parachute Bag organizes small parts in a heavy-duty Duckwear canvas body with 6 interior pockets and a shock cord drawstring to secure the contents. Features 13 outside pockets, and a reinforced waterproof poly bottom. Stacks 3 to 4 deep in a 5 gallon bucket.

• HEAVY DUTY CONSTRUCTION - Rugged 600D PVC backed polyester canvas fabric with heavy-duty stitching using industrial weight thread. Reinforced pockets and seams with double layers to prevent rips and tears.
• 64 POCKETS TO ORGANIZE ALL YOUR TOOLS - 12 interior tool slots and 52 exterior tool slots help organize and carry your tools, both large and small. I loop strap for tape rolls and a purpose-built tape measure clip make this a perfect organizer for handymen, electrictians, plumbers, etc.
• MAKES A GREAT GIFT - A perfect gift for someone in your life who is a handyman or likes to work in the garden. Know someone who needs a little help keeping all their tools organized? This is perfect for Christmas, Birthday, Father's Day, etc.
• BACKED BY THE RUGGED TOOLS 100% SATISFACTION GUARANTEE – If you are not satisfied with you Rugged Tools purchase for any reason, please contact us, and we’ll make it right.

Product features

64 Pocket, Rugged Tools Malone 5 gallon bucket organizer, for large and small tools for technicians, electricians, plumbers, carpenters, HVAC techs

FEATURES:

• Rugged 600D PVC backed polyester canvas fabric
• Heavy-duty stitching - industrial weight thread
• Reinforced pockets and seams - double layered to prevent tears and rips
• Room to organize 100+ tools:
  • Interior (12 tool slots):
    • 10 tool pockets + 2 tool loops + 1 loop handle
  • Exterior (52 tool slots):
    • Tier 1 (bottom): 4 medium pockets, 2 large pockets, 2 large pockets with flap closure
    • Tier 2: 4 large pockets, 1 XL wide pocket
    • Tier 3: 17 tool pockets, 1 large tool pocket, 1 Xl expandable pocket with flap closure, 1 XL expandable pocket drink holder
    • Tier 4 (top): 17 tool loops: 9 small, 6 medium, 2 large
    • BONUS: 1 tape strap loop for tape rolls, 1 tape bar clip for measuring tape

Carry, transport, and store with ease

Maximize exterior storage to max out interior storage

Designed for maximum organization

More pockets and storage space than other bucket organizers

Premium quality details

Built-to-last, heavy-duty materials and quality construction

Great gift for the handyman! A special present for his or her birthday, Father's Day, Mother's Day, Graduation, Boss's Day, or Housewarming.

Rugged Tools - no-fuss soft-sided tool liner to fit over 5 gallon buckets. Rugged Tools will TRANSFORM the way you buy and shop.

The Rugged Tools 64 Pocket Malone Bucket Tool Organizer slips over most standard 5 gallon buckets with sure-fit reinforced split seams to accommodate bucket handle.

Organize wrench sets, socket sets, power tools, screwdrivers, garden tools, etc.

• Rugged Tools- better quality than its competitors at a fraction of the cost.
• More durable + rugged compared to other brands.
• Pro quality at an exceptional value.
• If you are not satisfied with you Rugged Tools purchase for any reason, please let us know, and we’ll make it right.

SHOP THE RUGGED TOOLS COLLECTION OF TOOL BAGS, BACKPACKS, AND SPECIALTY BAGS.

Rugged Tools is proudly based in the U.S.A. Shop and buy Rugged Tools with confidence.

• Versatile Purpose Survival Kit Tool Pouches: A necessary great gifts for men.Substantial zipper pockets which can carry a variety of small pillers,screwdrivers, sockets, tire gaugesor flat tools,never a problem .
• Save Time and Effort Tool Roll Up Bag: Quickly and easily accessable for tools & small accessories .
• Easy To Store Tool Organizer Bucket: Rolls up for easy storage & carry,zippers and buckles for secure closure .
• Top Quality,Strong and Lightweight Wrench Roll:Well built with strong fixing strap in the middle, 5 zippered pockets for different types tool accesorries . Extremely durable material of waterproof waxed canvas fabric.
• Tool Pouches Dimension &100% Risk Free Buy & Fast Delivery: Unfold size 19”Lx11”W/(49cm x29cm).We are confident with our tool roll pouch quality, if you are not satisfied with our product in any time, feel free to contact us, you will get a full refund with no question asked.Amazon shipment, you will receive your tool bucket bag 1-3 days, no need worry about gift delays.

User questions & answers

Question:	Where is this made
Answer:	China ? Does it matter? Its nice and works great
Question:	Could i store a standard claw hammer in one of the pockets
Answer:	I believe it would be too big for a pocket. You could roll the bag around the hammer. It would stick out of the side
Question:	Do the bottom 4 zipper pockets detach from main roll up bag
Answer:	No they do not. All the bags are part of the roll and do not detached
Question:	How long is it when it's rolled up
Answer:	It is 11" long and about 5 to 6" in diameter depending on how much you stuff into the pouches

Product features

Car Camping Gear

Multi-functional tool roll up pouch, can be use a pouch sling, pouch roll and car camping gear essential case.

5 Spacious Zipper Pockets

Design with 5 spacious zipper pockets, keep all of your tools in one roll and keep your hands free.

Carry Handles,Wall Mount Hooks Design

Compact with canvas carry handles,easy to transport in your outdoor activities.

Two wall mount hooks design, keep the tools next to you.

Heavy Duty Secure Buckles Design

Heavy duty secure buckles design, keep variety of tools in one roll. Convinent to transport om outdoor activities

Product description

A caddy for your bucket. Shurhold manufactures the best detailing brushes, machine polishers, waxes, and more. Our mission is to provide you with quality tools and the best techniques to achieve a showroom shine. Make sure to check out our "how to." videos and articles where We help you keep your boat, car, or RV clean-n-simple.

• The Bucket Caddy organizes and stores all your gear inside a bucket when not in use
• The perforated bottom ensures water drains to keep your gear dry and the handle makes for easy removal when it's time to clean
• Easily empty your bucket for use by lifting the Bucket Caddy from its center handle
• All your gear is kept organized and dry
• When you are done using the bucket the Bucket Caddy drops back into the bucket with all your gear ready to store.

User questions & answers

Question:	does this caddy have a slit to fit over the edge of the bucket
Answer:	No it drops down inside the bucket. You put cleaning supplies & cleaners in the caddy for storage and remove the entire caddy with contents when you are ready to wash your car or boat.
Question:	How much weight will this support
Answer:	225# at least that's what I weight
Question:	Does the caddy have a solid bottom or does it have "drain" holes in the bottom? Thanks
Answer:	The caddy have a drain holes on the bottom
Question:	Does this fit in a standard 5 gallon bucket such as the ones you'd buy at home depot
Answer:	Yes... almost any 5 gallon paint bucket or similar

Product description

Custom Leathercraft 1119 Bucket Caddy Organizer, 48 Pocket

• Fourteen double row pockets inside and thirty four triple row outside organize a wide range of tools and accessories
• Tape strap and key clip included
• Drill pocket with hook and loop handle strap
• Designed to fit most standard 3 1/2 to 5 gallon buckets
• Made with Cordura fabric- constructed using high tenacity fiber technologies, making it both lightweight and strong

User questions & answers

Question:	I am looking for a bucket caddy for gardening. Would you recommend for that? I see Fiskars makes one with a lot less pockets
Answer:	Everybody has a bucket
Question:	Will this liner fit a square bucket
Answer:	Brand
Question:	Will the LeatherCraft seat fit on the bucket with the organizer in place
Answer:	Klein manufactures this in the USA- HNS Tools
Question:	Will a bucket seat still fit with this under it
Answer:	Alot of Klein products are assembled in the USA, this bag though was made in China. Angie/HNSTools

Product description

Perfect for storing and sorting parts and accessories. 5 gallon plastic pail with 4 assorted size black dividing Trays, for separating and organizing parts. Bucket is made with high impact plastic and a heavy-duty handle, capable of withstanding prolonged rough use. Included lid is water resistant. Includes one Pail, one lid, 2 small Trays, and 2 large trays. Sold as: each. Size: Pail/5 gallon, Trays/assorted. Color: Black/Yellow. Company: King innovation. (King innovation 47502).

• The product is manufactured in United States
• Select propellants that deliver consistent accuracy and performance
• Heavy-duty shop products
• Bucket Tool Organizer

User questions & answers

Question:	Can you buy just the inserts
Answer:	Not sure
Question:	I'm a contractor, are the treys strong enough to hold full storage bins of 16c nails, 3" black screws, and lag bolts when full
Answer:	Absolutely. It's the easiest way to make sure you have a supply of whatever size fasteners you need in one container. I keep 16, 12, & 8D nails in two tray. 3 1/2" - 1 1/4" drywall screws in the next. Roofing nails and finish nails in the top tray. With the trays in the pail and the lid on, the fasteners stay put in the trays.
Question:	I can't tell from the picture, do the trays all have the center circle
Answer:	Yes they do