12 best astro pneumatic tool joints

Product description

Astro Pneumatic's 7897 Ball Joint Service Tool and Master Adapter Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes in blow molded carrying case, keeping the tools organized and easy to transport.

• Removes and replaces press-fit upper and lower ball joints
• Forged C-frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles
• Blow molded case keeps the tools organized and easy to transport

User questions & answers

Question:	will tis kit work on a 2010 f250 superduty for ball joints and trackbar joint
Answer:	Yes I have used it on f250 f350 f450 and f550 from 1990 all the way to 2018
Question:	what are the dimensions of the C clamp? also what is the length of rod itself
Answer:	about the same as any other kit out there. not really big enough. none of them are. also you will find yourself using a 6 foot cheater bar on your ratchet. In my opinion, if you can sneak it past your wife. Get this kit. Then go buy the $129 12 ton press at harbor freight.
Question:	Will this work for lower ball joints on a 2000 ford crown victoria
Answer:	as long as it's the pressed in type ball joint, Yes.
Question:	ball joint press. will it work on a 2003 chevy silverado 1500 4x
Answer:	it should. i used it on a 2004 f150 lightning and had no problems and it does have the extensions included for all types of 4x4s. hope this helps

Product features

Ultra Duty C-Frame & A Wide Range Of Applications

From passenger vehicles and FWD applications to 4WD large trucks and equipment, the 7897 Master Kit includes all the adapters Astro makes and features our maximum duty C-frame for use with the most powerful 1/2" impacts on the market.

For Removal & Installation

Adapters designed to both install new and receive old pressed out ball joints.

New Forged Alloy

Constantly being rengineered to stay ahead of today's most powerful impact wrenches, Astro's newest 7897-01 C-frame could support a hanging fully loaded 18-wheeler without resulting in damage.

Custom Adapters For Difficult Spots

Includes adapters with cut-outs to navigate around control arms that are in the way. Most adapters either work with or can be modified to work on your application.

Other Popular Ball Joint Tools By Astro

Condensed ball joint set with common universal adapters.

Model no. 7865.

Other Popular Ball Joint Tools By Astro

Additional adapters for the 7865 (already included in 7897 Master Set).

Model No. 7868.

Other Popular Ball Joint Tools By Astro

Pickle Forks For Ball Joint Separating.

Model No. 78807.

Product description

Astro Pneumatic's 7868 Master Ball Joint Adapter Set Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997. Works on press-fit upper and lower ball joints. The set also includes live center forcing screw plug and a blow molded carrying case.

• Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997
• Work on press-fit upper and lower ball joints
• Set also includes live center forcing screw plug.
• Blow molded case keeps the tools organized and easy to transport"

User questions & answers

Question:	Is this kit compatible with the matco c-press
Answer:	Should be,it's a great kit
Question:	hi will this work on my 2005 C 4500 . ? same ball joints as the Ford 450 ,And
Answer:	yes on the c 4500 and ford 450 don't know on the 550
Question:	Will this work on a jeep wrangler
Answer:	Yes
Question:	will it work on an '89 Bronco 4 WD
Answer:	these are the adapters you need the press to go with them they will work on just about every thing

Product features

Covers A Multitude Of Vehicles From 1930's Through Today

From passenger vehicles and FWD applications to 4WD large trucks and equipment, the 7868 includes all the adapters not found the Astro 7865 and works with most other brand's C-frames.

Custom Adapters For Difficult Spots

Includes adapters with cut-outs to navigate around control arms that are in the way. Most adapters either work with or can be modified to work on your application.

For Removal & Installation

Adapters designed to both install new and receive old pressed out ball joints.

Ball Joint Tools Also Available From Astro

Pairs with 7868 to create a Master Ball Joint Kit.

Model No. 7865.

Ball Joint Tools Also Available From Astro

Complete Master Ball Joint Kit.

Model No. 7897.

Ball Joint Tools Also Available From Astro

Pickle Forks For Ball Joint Separating.

Model No. 78807.

Product description

Astro Pneumatic's 7865 Ball Joint Service Tool with 4-wheel Drive Adapters is a heavy duty forged steel tool and set that is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins, even removing rusted and corroded parts. Astro 7865 contains a C-frame press, 3 receiver tubes sizes: 2-3/4”x3", 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adapters. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).

• Heavy duty forged steel tool and set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins
• Will remove rusted and corroded parts
• Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3"", 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adapters
• Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
• Blow molded case for easy storage and transport

User questions & answers

Question:	Will this work on the dana 30 on a jeep xj cherokee? does it have an appropriate angled piece to fit dana axles
Answer:	No.
Question:	Will this work on a 2006 F
Answer:	The longest I can get it to extend is 49", the shortest is 35". The strap's pad is curved slightly, so these are pretty approximate measurements. Also, that's the unattached strap, from end to end. Divide in half for approximate length from bag to shoulder.
Question:	Will this work on a 2004 jeep wrangler tj? or do i need a different adapter? thanks
Answer:	Absolutely! I easily carry a tool bag that varies in weight daily and exceeds 14 pounds. Good choice, holds up well and is comfortable with the pad.
Question:	Will this work on a jeep Cherokee xj ball joints
Answer:	They fit true to size

Product features

Maximum Duty Ball Joint Press

Designed for high turn-over suspension shops and for use with the most powerful 1/2" impacts on the market, the 7865 kit provides professional quality in a small form factor kit.

New Forged Alloy

Constantly being rengineered to stay ahead of today's most powerful impact wrenches, the newest 7897-01 C-frame could support a hanging fully loaded 18-wheeler without resulting in damage.

Includes Universal Adapters & Sleeves

Various lengths and diameters of adapters and sleeves are provided to work on the most common standard applications for removing and installing ball joints or removing u-joints.

Ball Joint Tools Also Available From Astro

Expanded adapter set to make 7865 a Master Ball Joint Kit.

Model No. 7868.

Ball Joint Tools Also Available From Astro

Complete Master Ball Joint Kit.

Model No. 7897.

Ball Joint Tools Also Available From Astro

Pickle Forks For Ball Joint Separating.

Model No. 78807.

Product description

The Astro 78100 Goliath Ball Joint XL C-Frame Press boasts three times the throat space and features a notched foot that allows for the pressing out of ball joints without the removal of the top mount grease fittings. The large ball joint Press in this unit is for maximum clearance and for the effortless use of the tall and stacked adapters. The unit includes both long and short drive screws to maintain a shorter overall working length when desired.

• Large ball joint press for max clearance and easier use of tall and stacked adapters
• Includes both long and short drive screws to maintain a shorter overall working length when desired
• Features 3X the throat space and includes a notched foot that allows for pressing out ball joints without removal of top mount grease fittings
• Astro's new forged alloy steel
• 9.1" throat, 11.9" length

User questions & answers

Question:	What are the dimensions of the C is it bigger than 8 in on the inside where the screw comes in and the cups go
Answer:	HI. Thank you for your interest. The 12-inch bag can hold up to 20 pounds . And it is 12" wide, 7 in" long and 9 " high. Have a wonderful day
Question:	Will this work on u-joints
Answer:	this is a very sturdy tool bag it is all cloth it has a hard bottom but again it is cloth on the out side if this helps it does hold all my tools i need
Question:	does this work with the OTC and Astro ball joint adapters
Answer:	Seems like answers vary depending on the bag purchased. I have the 24-inch bag and it has 10 interior pockets, 5 per side, and 16 exterior pockets, 6 per side and 2 on each end.
Question:	Can i get the 2 thread bolts by itself to buy
Answer:	There is no leather in its construction, to my understanding; the strap is nylon and the shoulder pad is some gel stuff wrapped in what I assume is polyester. The hooks are metal.Overall, it's durable.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints
• Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench
• Or use included 5/8-18 thread adapter with any common slide hammer
• Unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage
• For Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more

User questions & answers

Question:	does the tool work with any other cars beside subaru
Answer:	No, i do not believe this will stand alone. Angie/HNSTools
Question:	I wonder if anyone knows if the subaru balljoint & nissan hicas balljoint are the same thread? hicas kit is same idea but 4x the price
Answer:	Yeah unfortunately it will still tip over since since it isn’t well balanced and the tape measurer holder holds your tape kind of loosely and will cause your tape to pop out if you try to stand the pouch. Other than that I’ve got no complaints the bag is great
Question:	Will the socket lock onto a ball joint with damaged threads
Answer:	Yes has 3 carry options
Question:	Can this remove the ball joint without damaging it
Answer:	depth is 8-9 inches width is 6 inches length is 12 inches

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• Adjustable for different size ball joints
• For separating the ball joint from spindle support arms on domestic and import vehicles
• Package Weight : 1.295 kilograms
• Package Dimensions : 6.3 L x 18.4 H x 10.2 W (centimeters)

User questions & answers

Question:	are they magnetic
Answer:	The chain is to hold rolls of tape. Not a great bag by any means. I have used Klein products for over 50 yeas and this bag is the only disappointment. Not designed for the tradesman like there pouches. Doesn't hold tools well and very few screw driver slots.
Question:	is box actual measurements 12x3x2???? need to know for toolbox measurements and their other set isnt correctly listed
Answer:	Hi... it will fit on any belt until 2" wide. Thanks
Question:	Is the sockets magnetic
Answer:	Yes, the pouch will fit a regular belt. The only thing I didn't like was that you have to take your belt off to the put the pouch on or off.
Question:	I have the 10mm socket broke and had the head of the socket fly off, I only have half of the part in hand now. Am I qualify for warranty
Answer:	You need a belt for the pouch.

Product features

Astro Pneumatic Tool 78810 10pc Torque Limiting Extension Set

• 1/4" Drive

• 6pt Sockets

Set includes:

5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm Flex Sockets

Product description

The Astro Pneumatic Tool Company C-Frame is used with Astro Item # 7897 - Ball Joint Service Tool and Master Adapter Set.

• Package dimensions: 22.606 cms L x 14.732 cms W x 5.08 cms H
• Package quantity: 1
• Product type: Auto Accessory
• Country of Origing: China

User questions & answers

Question:	What brand has largest id on the clamp,ball joint press service tool
Answer:	The chain is for holding electrical tape.
Question:	What is the maximum width
Answer:	Yes just received mine 1/7/17 and it is proudly stamped made in the U.S.A. Quality of the bag is top notch I am very very very pleased!

Product description

The Astro Pneumatic 78807 5 piece Pickle Fork Ball Joint Separator Set features solid construction pickle forks in 5 popular sizes. This set is used to remove ball joints, tie rods, pitman arm, and other linkages. One piece design ensures durability, rigidity, and complete transfer of hammering forces. Included are the following sizes to fit most automotive applications: Open Size - 11/16", 15/16", 1-1/16", 1-7/16", and 1-5/8". Depth - 2-3/4" (69.8mm), 3" (76.2mm), 2-7/8" (73mm), 2-3/8" (63.5mm), and 3-1/8" (79.3mm).

• Features solid construction pickle forks in 5 popular sizes
• This set is used to remove ball joints, tie rods, pitman arm, and other linkages
• One piece design ensures durability, rigidity, and complete transfer of hammering forces
• Included are the following sizes to fit most automotive applications: Open Size - 11/16", 15/16", 1-1/16", 1-7/16", and 1-5/8"
• Depth - 2-3/4" (69.8mm), 3" (76.2mm), 2-7/8" (73mm), 2-3/8" (63.5mm), and 3-1/8" (79.3mm)

User questions & answers

Question:	Can this set be used with an air hammer
Answer:	Dear Customer, we tested 33 lbs loading capacity for 24 hours and all turn out great. Over this weight will be too heavy to carry by hand or shoulder, not recommend.
Question:	Where are these tools made? In the US
Answer:	I couldn't tell you but I wasn't concerned about it because I had one just about the same and I had it for about 12 years before it gave out. The other bag was a bit smaller than this one so I am happy. It has several pockets on the inside that I jam things in and a few on the outside too. Overall I like the bag. I have worked for many years with a tool bag (79).
Question:	With this fit around an s-cam to get a slack adjuster off
Answer:	yes, this is the right thing for the cordless screwdriver and battery pack, and its inner porckest are designed for organising screwdriver bits, drill bits as well as other small accessories and parts.
Question:	Anyone use this with a 2008 Silverado 1500 4wd? Need to remove a complete steering knuckle and want to buy a set that will work with all joints
Answer:	Not sure. Mine is almost 10 yrs old. Held up very well. I also suggest a Veto bag. They ARE indestructible.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• Use with impact wrench to remove hubs, drums and brake rotors (dics)
• Durable forged design, made from same alloy used on Astro's famous ball joint presses
• Use with 1-1/4" socket and 1-1/4" or 32mm wrench
• Drum & Rotor pulling arms include raised stops for use with ratchet straps (not included) for especially difficult applications
• Includes three different hub adapters to fit all types of hub sizes

User questions & answers

Question:	Where is it made in
Answer:	The bag has 2 points to attach shoulder strap to. I think they are on opposite sides of the bag as far as I remember (bag is not with me right now).
Question:	Out of curiosity even though im aware its not made it. But you guys think in can be used as a gear puller to force out some bushings
Answer:	Dear Customer,It's not suitable for putting in the washing machine, because there are mild steel wires for supporting the top width open, we worry that washing machine will make them deform.
Question:	Looking at this tool for pulling brake rotors on my vehicles. unlike the otc 6980, why is the thread is only half way on the drive bolt on this one
Answer:	No should have one on each side
Question:	I have a 1968 pontiac that has deep drums. the otc tool arms are not long enough to reach (perhaps 2" short?). are these arms longer? how long r they
Answer:	Dear PaAu minimum it can load 15 Kg.Best Regards

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• Pinless design allows a full 360° of freedom for the universal head to angle and rotate
• Astro’s Nano form factor and “Anti-Floppy” design prevents feeling loose after heavy use but may feel stiffer out of the box before worn in
• Forged CRO-MO with lifetime warranty
• Includes sizes 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm

User questions & answers

Question:	How many inches long are the sockets
Answer:	My athletes who wear this product typically wear a t-shirt underneath, which helps when they may be between sizes. Measure again with the shirt she will wear, and see if that helps.
Question:	I'm interested in ordering sae/metric sets of these, but not if the reported 17mm/19mm sockets still have fitment/qc issues. can someone confirm
Answer:	For sizing go to DonJoy's website for sizing chart and instructions.
Question:	Do they have the size embedded on them when the size wears off
Answer:	a 44'' chest what size?
Question:	So os the 17mm problem fixed
Answer:	We bought this brace after our son dislocated his shoulder. Once he was released back to sports, this brace stabilized his shoulder for the following football season. He states it stabilized but it did not specifically take the weight off the shoulder. Great brace for support - 1 year post injury.

Product description

The Astro Pneumatic Tool 78244 11-Piece 1/2" Drive Nano pinless Universal impact sockets - metric are made from cro-mo with lifetime warranty. The pinless design in these sockets allow for a full 360°of freedom for the Universal head to angle and rotate. As a result, the new hex ball swivel design takes more abuse than the "winged" Designs by transferring more of the impact force to the bolt itself. This set includes one aluminum socket holder and pinless Universal impact sockets in the following sizes: 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm

• Pinless design allows a full 360° of freedom for the universal head to angle and rotate
• Astro’s Nano form factor and “anti-floppy” design prevents feeling loose after heavy use but may feel stiffer out of the box before worn in
• Swivel hex design transfers impact forces more efficiently with greater durability
• Forged cro-mo with lifetime warranty

User questions & answers

Question:	what angle can the function at
Answer:	No... Its mainly a support for a sore or damaged shoulder... I have a torn rotator cuff, it gives the same support a knee brace would give to your knees... It is comforting...
Question:	Are these sockets stiff to move or are they floppy
Answer:	I'm 200 lbs unless your huge it will help. Smaller should have no problems. Lots of adjustments. My wife works with orthopedic surg she picked it 35yrs experience. You can always send it back
Question:	How do you warranty tool
Answer:	Brand if PainFX. The quality of the material and 'construction' are very good. However, this doesn't do squat to relieve any shoulder pain, and in fact, made it hurt more.

Product description

The Astro 3018 3.5" Digital Tire Inflator with Hose boasts a durable 21” stainless steel braided hose for increase durability and an easy to install AAA Battery System for 4X the battery life. Inflate, deflate and measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System). This unit is designed with a large face backlit LCD digital read-out and is covered with a rubber sleeve for extra comfort and durability. Specifications: Measuring Range: 3 ~ 175PSI, Units: PSI/BAR/KPA/KGF, Resolution: 0.1 PSI, Accuracy: 0 – 58 psi +/- 1.2 PSI, 59 – 174 psi +/- 1.2 PSI, Working Temperature: 32°F~104°F (=0°C~ 40°C), Power: AAA Batteries, Battery Lifetime: 560hr

• New dual AAA battery powered design. 4X the battery life and simplified battery installation.
• New 21” Stainless braided hose for increased durability
• Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System)
• Displays KG, PSI or BAR measurement
• Large face backlit LCD digital read-out
• Unit covered with rubber sleeve for extra comfort and durability
• Two position lever. 1st position deflates, 2nd position inflates.

User questions & answers

Question:	What batteries does it use
Answer:	4-24-16 The one I received today IS the updated version with the steel mesh hose and 2 AAA batteries. Also, simplified battery installation/replacement procedure. Simply peel back the rubber cover, pry open battery compartment door, install batteries, replace compartment door and re-seat rubber cover.
Question:	Can this gage be used with the air hoses you find at many gas stations
Answer:	Everyone else has given you the common answer, which is no. But if you're a traveler, and you wanted to use this at gas stations, then you could add this: http://www.amazon.com/Amflo-701-2-npt-tank-valve/dp/B0002V4Q4I/ref=sr_1_8?ie=UTF8&qid=1410808589&sr=8-8&keywords=schrader+valve+adapter Then clip the gauge hose on your tire, and hold the station hose on the end of the gauge and that would work. Although maybe not real comfortable to do.
Question:	can the air chuck be replaced by a dual one, and if so what model
Answer:	Yes, the black air hose that is attached to this unit has 1/4" NPT on both ends and fits standard accessories. It appears that any of the Milton dual head air chucks will fit as they are furnished with female 1/4" NPT.
Question:	Does this unit hold and seal the tire stem well? The clamp looks the cheap one that doesn't stay on the valve stem
Answer:	Put on correctly, it seals and will hold air...it is not a cheap fitting. I have used mine to check tire pressure even without an air hose hooked up when I was just checking.

Product features

The Industry Leader: Rugged and Precise Design

The 3018 redesign boasts the most durable steel braided hose and easy to install AAA Battery System on the market. Inflate, Deflate and Measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS. (Tire Pressure Monitoring System).

Easy To Install Battery Port

4-times the battery life of other popular models and no disassembly of product required. Simply peel back the rubber sleeve and pop off the cover.

Durable Steel Braided Hose

Now with new rubber bend guard for increased durability where its needed, Astro's long lasting flexible braided stainless hose is a popular feature.

Lock-On Air Chuck

Heavy duty brass chuck clips and holds onto valve stem for easy, one-hand operation.