12 best strut spring compressors

• EASY TO USE: Use the ABN 11.5” Inch Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life
• LOCKS INTO PLACE: Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
• WIDE RANGE OF COMPATIBILITY: Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.5-inch threaded rods for 10-inch to 10.5-inch maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)
• BUILT TO LAST: Constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use
• EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization

User questions & answers

Product features

About ABN 9210 MacPherson Strut Spring Compressor

The ABN 9210 MacPherson Strut Spring Compressor takes tension off to safely remove strut and spring assembly. Quickly and safely compresses the coil spring for replacing a shock absorber unit or spring as well as allowing safe and easy repairs on bent struts, strut tubes, and damaged pieces. Features forged construction, acme threaded rod, and built-in detent pins. Broad spring contact and built in detent pins lock the spring into place for safer spring compression. Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. Forged hooks and center screw hardened for extreme strength and long life. Note: Lubricate threads with anti-seize compound for prolonged life.

A Closer Look

Product description

Known as "the standard in the industry," the 7600 handles the heaviest coil-over-shocks, on light trucks and SUV's, without needing additional adaptors. It also has longer handles for extra torque. The multi-positions upper spring hooks can be arranged for ultimate flexibility to fit "factory" coil spring configurations. It has a longer compression stroke that can even handle the Jeep KX Cherokee Trailhawk and an integrated structural ring guard. Whether long, short, narrow, or angled, the 7600 will get it done. Made in the U.S.A.

• No adaptors required
• Heavy duty acme thread
• Versatile mounting options
• Multi-position hooks
• All steel construction

User questions & answers

Product description

Maximum workinng stroke:317mm



3 pairs of C jaws for a wide of vehicle applications.Silver color: 5.0"-8.3" (126-212mm). ;Black color: 3.5"-6.3" (88-160mm) ;Golden color: 2.6"-4.9" (65-125mm)

3 pairs of yellow covers help protect lacquered springs surface from damage.

• MOSTPLUS Professional Multi Use MacPherson Interchangeable Fork Spring Compressor Set
• Compresses all types of MacPherson style coil springs front and rear.
• Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm
• The coil spring compressors are manufactured under very strict quality control and are approved to endure extremely high loads.
• The Max Force 4487 KG. No impact wrench! Hand ratchet only.

User questions & answers

Product description

THE RIGHT TOOL FOR A TOUGH JOB: MacPherson strut spring replacement is a job most people would like to leave up to a professional auto mechanic. It’s time intensive, and can be dangerous if you don’t understand the risks. If you’re a professional mechanic or DIY mechanic, it’s important to use the right spring clamp for your MacPherson Strut replacement. The OEMTOOLS 25550 MacPherson Strut Spring Compressor helps you safely compresses and remove back and front struts during MacPherson Strut replacements, an important and routine part of maintenance of suspension for cars. We’ve built heavy duty spring tools, because changing MacPherson struts is a heavy duty job. Strut Spring Compressor Kit: These two strut compressors work in tandem to put equal forcing pressure on each side of your MacPherson Strut Spring so it won’t bend or deform during your Strut replacement. Along with a sturdy bench vise, these tools are everything you need to safely handle Strut Springs. For DIY Mechanics: remember to take every precaution when handling Strut Spring. Use a heavy duty tool. Apply equal pressure to both sides of your Spring. And do not jostle the Strut Spring when it’s being held by the Strut Spring Compressor Tool. Using the right tool goes a long way to doing the job right.

From the Manufacturer

The OEMTOOLS Strut Spring Compressor is great for your shop or garage. This item is designed to compress most MacPherson Strut Spring sizes. The broad spring contact and built in detent pins help to lock the spring into place for safer spring compression. This OEMTOOLS Strut Spring Compressor quickly and safely compresses the spring for easy replacement of the strut cartridge or strut assembly repair. The hooks are forged and the center screw is hardened for long life. Note: Lubricate the threads of this tool with anti-seize compound to prolong the life of the center screw.

• WIDE RANGE OF COMPATIBILITY: Compress most sizes of MacPherson strut springs with the OEMTOOLS strut spring compressor; Quickly and safely compress the strut spring for easy replacement of the strut cartridge or strut assembly repair
• LOCKS INTO PLACE: Safer spring compression with the broad spring contact and built-in detent pins; Strut compressor tools make changing front and rear struts safer and easier
• LONG LASTING: Forged hooks and hardened center screw make these spring compressors the safest on the market
• OTHER FEATURES INCLUDE: Heat-treated forcing screw and safety latches for locking hook to spring; These spring clamps are thoughtfully designed to be the only shocks and struts set you'll ever need
• IMPORTANT AUTO SUSPENSION TOOL: MacPherson struts are the most important element of the suspension system in many modern vehicles, and should be replaced, on average, every 50,000 to 80,000 miles

User questions & answers

Product features

OEMTOOLS: We Have Every Tool You Need to Get the Job Done Fast

MacPherson strut spring replacement is time-intensive job, and it can be dangerous if you don’t understand the risks. That's why it's so important that you have the right tools for the job. The OEMTOOLS MacPherson Strut Spring Compressor helps you safely compress and remove strut springs during MacPherson strut replacements, an important and routine part of maintaining many cars' suspension system that should be performed every 50,000 to 80,000 miles. This set of two strut spring compressors works in tandem to put equal forcing pressure on each side of your MacPherson strut spring so it won’t bend or deform during your strut replacement. These tools are everything you need to safely handle strut springs.

Fits Most MacPherson Strut Springs

9.75 inch max opening makes these tools compatible with most MacPherson strut springs on both large and small vehicles.

Strut Spring Compressor Tool

Rugged safety latches make broad contact with the strut spring, and keep the tool safely locked to the spring during removal & re-installation of the MacPherson strut.

Safest Way to Replace MacPherson Struts

These two compressors work in tandem to put equal forcing pressure on each side of your MacPherson strut spring so it won’t bend or deform during your strut replacement. Remember to take every precaution when handling strut springs. Use a heavy duty tool such as ours. Apply equal pressure to both sides of your spring. And do not jostle the strut spring when it’s being held by the strut spring compressor tool.

Heavy Duty Design

Heavy steel body, forged hooks, and hardened center screw hold up against the immense energy of compressed strut springs. These are great tools for mechanics, because they hold up through repeated MacPherson strut replacements.

• This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup
• Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut
• Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
• The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity
• A plastic carry case is included. easy to organize and carry the tool

User questions & answers

Product features

2pc Coil Spring Compressor For MacPherson Struts 300MM

A Closer Look

Product description

Description

MacPherson Struts are the most important element of the suspension system in many modern vehicles, and should be replaced, on average, every 50, 000 to 80, 000 miles. Our item is adesigned to compress many MacPherson Strut Spring sizes, universally compatible with struts assembly that removes from the vehicle to transfer the old spring on the new strut.



Feetures:

Quickly and safely compresses the coil spring for replacing a shock absorber unit or spring as well as allowing safe and easy repairs on bent struts, strut tubes, and damaged pieces

Features forged construction, acme threaded rod

Broad spring contact and built-in parts lock the spring into place for safer spring compression

Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools

Forged hooks and center screw hardened for extreme strength and long life

Heavy-duty plastic carrying case for easy transportation, safe storage, and simple organization



Note:

A compressed spring can inflict bodily injure, always wear safety glasses and gloves

DO NOT USE IMPACT DRIVER!

• This item is designed to compress many MacPherson Strut Spring sizes, universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut
• The broad spring contact and built in detent pins help to lock the spring into place for safer
• Constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use
• A plastic carrying case is included for easy transportation, safe storage, and quick organization
• Please not that: a compressed spring can inflict bodily injure, always wear safety glasses and gloves, and DO NOT USE IMPACT DRIVER!

Product description

THE RIGHT TOOL FOR A TOUGH JOB: MacPherson strut spring replacement is a job most people would like to leave up to a professional auto mechanic. It’s time intensive, and can be dangerous if you don’t understand the risks. If you’re a professional mechanic or DIY mechanic, it’s important to use the right spring clamp for your MacPherson Strut replacement. The OEMTOOLS 27036 MacPherson Strut Spring Compressor helps you safely compresses and remove back and front struts during MacPherson Strut replacements, an important and routine part of maintenance of suspension for cars. We’ve built heavy duty spring tools, because changing MacPherson struts is a heavy duty job. Strut Spring Compressor Kit: These two strut compressors work in tandem to put equal forcing pressure on each side of your MacPherson Strut Spring so it won’t bend or deform during your Strut replacement. Along with a sturdy bench vise, these tools are everything you need to safely handle Strut Springs. For DIY Mechanics: remember to take every precaution when handling Strut Spring. Use a heavy duty tool. Apply equal pressure to both sides of your Spring. And do not jostle the Strut Spring when it’s being held by the Strut Spring Compressor Tool. Using the right tool goes a long way to doing the job right.

• WIDE RANGE OF COMPATIBILITY: Compress most sizes of MacPherson strut springs with the OEMTOOLS strut spring compressor; Quickly and safely compress the strut spring for easy replacement of the strut cartridge or strut assembly repair
• LOCKS INTO PLACE: Safer spring compression with the broad spring contact and built-in detent pins; Strut compressor tools make changing front and rear struts safer and easier
• LONG LASTING: Forged hooks and hardened center screw make these spring compressors the safest on the market
• OTHER FEATURES INCLUDE: Heat-treated forcing screw and safety latches for locking hook to spring; These spring clamps are thoughtfully designed to be the only shocks and struts set you'll ever need
• IMPORTANT AUTO SUSPENSION TOOL: MacPherson struts are the most important element of the suspension system in many modern vehicles, and should be replaced, on average, every 50,000 to 80,000 miles
• Broad spring contact and built in detent pins help to lock the spring into place for safer spring compression
• Hooks are forged and the center screw is hardened for long life
• Note: lubricate the threads of this tool with anti-seize compound to prolong the life of the center screw

User questions & answers

Product features

OEMTOOLS: We Have Every Tool You Need to Get the Job Done Fast

MacPherson strut spring replacement is time-intensive job, and it can be dangerous if you don’t understand the risks. That's why it's so important that you have the right tools for the job. The OEMTOOLS MacPherson Strut Spring Compressor helps you safely compress and remove strut springs during MacPherson strut replacements, an important and routine part of maintaining many cars' suspension system that should be performed every 50,000 to 80,000 miles. This set of two strut spring compressors works in tandem to put equal forcing pressure on each side of your MacPherson strut spring so it won’t bend or deform during your strut replacement. These tools are everything you need to safely handle strut springs.

Fits Most MacPherson Strut Springs

9.75 inch max opening makes these tools compatible with most MacPherson strut springs on both large and small vehicles.

Strut Spring Compressor Tool

Rugged safety latches make broad contact with the strut spring, and keep the tool safely locked to the spring during removal & re-installation of the MacPherson strut.

Safest Way to Replace MacPherson Struts

These two compressors work in tandem to put equal forcing pressure on each side of your MacPherson strut spring so it won’t bend or deform during your strut replacement. Remember to take every precaution when handling strut springs. Use a heavy duty tool such as ours. Apply equal pressure to both sides of your spring. And do not jostle the strut spring when it’s being held by the strut spring compressor tool.

Heavy Duty Design

Heavy steel body, forged hooks, and hardened center screw hold up against the immense energy of compressed strut springs. These are great tools for mechanics, because they hold up through repeated MacPherson strut replacements.

Product description

This Compressor easily compresses most Macstrut springs and allows for repair on strut tubes, bent struts and other damaged pieces.



Feature:



Compress coil springs to repair or replace MacPherson struts, shock absorbers and spring sets.

Built-in detent safety pins and broad spring contact securely locks into place for protection.

Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut

Threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools

Constructed with forged hooks and center screw hardened for maximum strength and longevity



Easy to Use:



1. Lubricate both main shafts with oil.

2. Align the hooks with the safety pins backed off so the hooks will fit over the spring

3. Position both set of hooks 180° a part, opposite each other.

4. Push safety pins in the lock position on hooks.

5. Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge





Special tips:The color of blow case may be varied, you may receive item with black or red carry case, it won't affect item function.

DO NOT USE IMPACT DRIVER!



Caution:A compressed spring can inflict bodily injure, always wear safety glasses and gloves

• Compress coil springs to repair or replace MacPherson struts, shock absorbers and spring sets
• Built-in detent safety pins and broad spring contact securely locks into place for protection
• Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut
• Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
• Constructed with forged hooks and center screw hardened for maximum strength and longevity

• [Safely Install Coil Springs] Remove and install coil springs, shock absorbers, struts, and spacers safely and efficiently with the ABN 2 Piece Auto Coil Spring Compressor Tool Set; Strut spring compressor kit allows for safe, secure, and balanced compression
• [Increase Security when Working] Safety guard bar adjusts from 8 to 11.7 inches (20.3-29.7cm) and prevents accidental pressure release while you work with strong, powerful springs; Suspension spring tool hook jaws are slanted and have locking mechanisms for increased security to protect you or your workers better
• [Universal Strut Spring Compression Tool] Automotive coil spring compression tool brackets feature hook jaws that can extend from 1.4 to 11 inches (3.6 to 27.9cm) to fit your cars, trucks, motorcycles, ATVs, and other larger vehicles; Car spring compressor tool bears up to 2,204.5 pounds (1000kg)
• [Built to Last] Drop-forged steel to provides maximum durability and strength, while black oxide finish resists corrosion and rust; Rugged frame reduces flexing, bending, and warping even under high tension; Always grease threads before use to avoid stripping
• [Easy to Use] Extend internally threaded rod to full length and attach the bracket jaws onto the spring; Adjust safeguard and tighten locking nut to secure in place; With a hand ratchet or wrench, slowly and evenly crank the 19mm hex socket to compress the spring; Not intended for impact tools

Product features

ABN Truck Coil Spring Compressor Tool

Replace bent struts and strut tubes or install new shock absorbers, coil springs, and spacers with the ABN Truck Coil Spring Compressor Tool, 2 Piece Shock Spring Clamps.

COIL COMPRESSOR BRACKETS

Coil compressors brackets can bear up to 1000 kg and feature hook jaws that extend from 1.4 inches to 11 inches to fit your compact cars, half-size and full-size trucks, domestic and imported vehicles, motorcycle, ATV, and other off-road toys.

ADJUSTABLE SAFEGUARD

Adjustable safeguard extends from 8 to 11.7 inches and helps to prevent accidental release while working. Plastic blow-molded carrying case allows for easy transportation, safe storage, and quick organization.

HEAVY-DUTY STEEL FRAME

Auto strut coil spring compressor has a heavy-duty steel frame to reduce tool flexing, bending, and warping even under high tension.

Product description

Application

• Designed to disassemble/assemble operations of car spring shock and can compresses and pauses the spring in any position. Removes the toughest strut spring for replacement and helps to repair strut components.
• Powerful and essential tool for car repairing.
• Able to remove the spring maximum diameter reach up to 7.8" (200 mm) and maximum height reach up to 20" (500 mm) and such capacity suits most springs.

Safety instruction and Warning

• Coil spring compressor should be securely fixed on flat ground before starting to use.
• When applying compression to the spring, always stand beside the unit.
• If not in use, clean and store the spring compressor in a safe and dry place.
• Maintain the compressor in good condition. Use genuine parts only to replace or repair damaged parts.

Maintenance

• Adequate amount of lubricator must be applied to the moving part before use
• Must inspect the rack cap, spring adjustable screw of both axis and the compressed ratchet etc.,
• Check the screws,if found loose,tighten immediately
• Make sure they are in good conditions

• Brand: HTTMT
• Designed to disassemble/assemble operations of car spring shock and can compresses and pauses the spring in any position. Removes the toughest strut spring for replacement and helps to repair strut components.Powerful and essential tool for car repairing.
• Able to remove the spring maximum diameter reach up to 7.8" (200 mm) and maximum height reach up to 20" (500 mm) and such capacity suits most springs.
• Coil spring compressor should be securely fixed on flat ground before starting to use.When applying compression to the spring, always stand beside the unit.If not in use, clean and store the spring compressor in a safe and dry place.
• Adequate amount of lubricator must be applied to the moving part before use. Must inspect the rack cap, spring adjustable screw of both axis and the compressed ratchet etc., Check the screws,if found loose,tighten immediately

• Professional Multi Use MacPherson Interchangeable Fork Spring Compressor Set
• Compresses all types of MacPherson style coil springs front and rear.
• Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm
• The coil spring compressors are manufactured under very strict quality control and are approved to endure extremely high loads.
• SGS Test Report: The Max Force 4487 KG. No impact wrench! Hand ratchet only.

User questions & answers

• Heavy Duty 11-4/5” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.
• Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
• Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs).
• Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice.
• Orion Motor Tech pursue outstanding quality and 2-YEAR WARRANTY service, only have point of departure, there is no terminal point. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. 1.Go to your amazon account and find the order. 2.Click the seller name and enter the store page. 3.Click "Ask a question".

User questions & answers

Product features

Macpherson Strut Spring Compressor Set