13 best ball joint presses

Product description

The OEM TOOLS Ball Joint Press 4WD Service Set installs and removes ball joints on most cars and light trucks with press fit ball joints. These ball joint kits can also be used as a u joint tool remover and installer on most cars and light trucks. This ball joint puller set is the same as the OEMTOOLS 27023 Ball Joint Tool Remover with the addition of a ball joint press adapter set that is necessary for removing and installing upper and lower ball joints on 1/2 to 3/4-ton 4-wheel drive vehicles with the Dana 44 Series front axle (1967 and newer). The C clamp ball joint is built to last with its forged C body for additional toughness and durability, ensuring it can handle heavy-duty jobs. Our ball joint remover tool features a rust-resistant finish on all parts. This ball joint and u joint removal tool kit comes in a convenient storage case for safe keeping and easy transport, making it simple to take the ball joints separator kit anywhere. Our ball joint remover and installer is compatible with many OEMTOOLS adapter sets, including 27163, 27164, 27165, and 27166.

• BALL JOINT PRESS KIT AND U JOINT TOOL: This ball joint tool installs and removes ball joints on most cars and light trucks with press fit ball joints; Ball joint removal tool may also be used as a u joint removal tool on most cars and light trucks
• BALL JOINT PRESS ADAPTERS INCLUDED: Our ball joint separator kit comes with ball joint adapters needed to remove and install any upper and lower ball joint on 1967 to current 1/2 to 3/4-ton 4WD vehicles with the Dana 44 Series front axle
• HEAVY DUTY BALL JOINT PRESS: The ball joint puller has a forged C body for toughness and durability, ensuring this ball joint removal kit and u joint press can handle any job; All parts in this ball joint tool kit have a rust-resistant finish
• CONVENIENT BALL JOINT KIT STORAGE: This ball joint puller tool comes in a sturdy molded plastic carrying case for safe keeping and easy portability; Take this master ball joint service kit and u joint kit from job to job with this convenient case
• COMPATIBLE BALL JOINT ADAPTER SETS: The ball joint press tool kit can be used with another ball joint adapter set for a near-universal ball joint press set; Our ball joint tool set is compatible with OEMTOOLS 27163, 27164, 27165, and 27166

User questions & answers

Question:	Do these come with grilles
Answer:	yes
Question:	ok 1 person has said its 2 speakers and another says 1 speaker, which is it? it says SET of 1 so i assume its 1 set containing 2 speakers
Answer:	Yes they come in pairs.
Question:	Is the 550 watt the same as the 420 just different wattage
Answer:	What do you mean specifically?? The 420 watt is only 60 watt RMS, while the 550 watt is 90 watt continuous.
Question:	Did this package include two speakers
Answer:	This is sold as 1 set of 2 speakers

Product features

Pioneer TS-A6966R 6 x 9 inches 3-Way Speaker

Pioneer TS-A6966R A-Series 6 x 9 inch 420 Watts Max Power 3-way speakers with Multilayer Mica Matrix Cone and Lightweight Elastic Polymer Surround.

Pioneer’s next generation of TS-A series speakers offer improved bass and dynamic range, higher power handling and a new cosmetic design. The TS-A speakers are designed to replace the vehicle’s factory installed speakers and produce improved sound quality at exceptional value.

420 Watts Max Power (60 Watts Nominal)

New Multilayer Mica Matrix Cone Design for Optimum Sound Reproduction

Lightweight Elastic Polymer Surround

OEMTOOLS 37089 Ball Joint and U-Joint Press Set

The OEMTOOLS Ball Joint Press Kit installs and removes ball joints on most cars and light trucks with press fit ball joints. This ball joint puller can also be used as a u-joint removal tool. Our C-clamp ball joint tool set comes with adapters, giving this kit near-universal ability to service car and truck ball joints.

Durable Ball Joint Press

This ball joint separator kit is built to handle any job. Our heavy-duty ball joint removal tool has a forged C body for additional toughness and durability. The ball joint puller set features a rust-resistant finish on all parts and comes in a convenient storage case for safe keeping, ensuring this ball joint installer and remover set will last for years to come.

Designed for Universal Compatibility

Our ball joint press set comes with multiple adapters for near-universal compatibility with most cars and light trucks. The ball joint service set includes adapters that are necessary for removing and installing upper and lower ball joints on 1/2 to 3/4-ton 4WD vehicles with the Dana 44 Series front axle (1967 and newer). And this ball joint remover and installer is compatible with many OEMTOOLS adapter sets, including 27163, 27164, 27165, and 27166.

• Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, as well as Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs. Replacement parts available.
• Excellent for removal and installation of press-fit parts such as ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• Allows service for vehicles having the Dana 28, 30, 35, 44, 60 axle
• Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.

User questions & answers

Question:	Can this tool be used on a Infiniti g
Answer:	I used it on a Honda element and didn't have any problems. You just have to find the correct combination to press it out. I'd reccomend having a ball joint separator on hand as well. Mine were hard to separate.
Question:	will this work on a 2008 Honda Element lower ball joint?balljoint
Answer:	Worked on my ram 150. They also sell an extra kit with wore cups.
Question:	Will this ball joint press work for a 4x4 dodge ram
Answer:	We are afraid not. It work with a 1994-1999 Dodge Ram 2500 4WD.
Question:	Will this work on 1997 chevrolet
Answer:	Not in the USA for the price I paid and it don't say on the product

Product features

Specifications:

Package Quantity: 21 pieces

Tools Material: Carbon steel

Surface: black-oxide finish

Suitcase Material: ABS plastic

Package Dimensions: 24.0 x 19.69 x 4.72 in.

Package Weight: 33.3 pounds

Compatibility:Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, as well as Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs. Replacement parts available.

Adjust Anchor Pins

1. To remove the brake anchor pins, remove all lock ring retainers from the Brake Anchor Pins.

2. Position the Ball Joint Press over the brake spider.

3. Tighten the Jackscrew until the anchor pins can be removed.

4. To install the brake anchor pins, insert the brake anchor pins. Then reinstall the lock ring retainers on the brake anchor pin.

5. Unscrew and remove the Ball Joint Press.

Dis/Assemble a U Joint

1. To disassemble a "U" joint, remove any external and/or internal lock rings.

2. Position the Ball Joint Press around the drive shaft yoke and tighten the Jackscrew until the first bearing is removed.

3. Reposition the Ball Joint Press and remove the second bearing.

4. To assemble a "U" joint, clean all dirt and oil from the yoke area.

5. Align the replacement bearing and Ball Joint Press as straight as possible over the yoke. Press the replacement bearing into the yoke, and reassemble the external/internal lock ring.

6. Reposition the Ball Joint Press and second replacement bearing as straight as possible over the yoke, and press the bearing into the yoke.

7. Reassemble the external/internal lock ring.

Remove a Ball Joint

1. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube, and position it under the vehicle's ball joint.

2. Place the Removal Adapter between the Receiving Tube and the Jackscrew.

3. Then, place the Installation Adapter between the top of the ball joint and the Ball Joint Press.

4. Tighten the Jackscrew until the Receiving Tube contacts the vehicle's control arm.

5. Check the alignment of all the Ball Joint Kit parts, and continue tightening the Jackscrew until the vehicle's ball joint is removed.

Installation a Ball Joint

1. Clean the vehicle's control arm, and coat the inside diameter of the control arm with a light lubricant.

2. Insert the replacement ball joint as straight as possible into the vehicle's control arm.

3. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube and position it on top of the vehicle's control arm.

4. Place the Installation Adapter between the Receiving Tube and the Ball Joint Press. Then, place the Removal Adapter between the ball joint and the Jackscrew.

5. Check the alignment of all the Ball Joint Kit parts. Then, tighten the Jackscrew until the vehicle's ball joint is firmly sealed.

Part Description:

A. Install Adapter B. Receiving Tupe 1-3/4 x 2"

C. Receiving Tupe 2-1/4 x 2-1/2" D. Receiving Tupe 2-3/4 x 3"

E. Receiving Tupe 2-1/2” O.D. x 2-1/4” I.D. x 1-1/2” L F. Receiving Tupe 2-3/4” O.D. x 2-7/16” I.D. x 2-1/4” L

G. Install Adapter H. Remover/ Installer 1-7/16” O.D. x 3/4” I.D. x 1” L

I. Receiving Tupe 2-1/4” O.D. x 1-7/8” I.D. x 7/16” L J. Receiving Tupe 2-1/8” O.D.x 1-3/4” I.D. x 1/2” L

K. Receiving Tupe 2-1/2” O.D. x 2-1/4” I.D. x 2-3/4” L L.Receiving Tupe 3” O.D. x 2-3/4” I.D. x 2-1/4” L

M. Plug 7/8” N. Receiving Tupe 2-1/4” O.D. x 2” I.D. x 2” L

O. Installing Tupe 2” O.D. x 1-3/4” I.D. x 3” L P. Receiving Tupe 2-7/16” O.D. x 2-3/16” I.D. x 3-3/16” L

Q. Installing Tupe 2” O.D. x 1-3/4” I.D. x 3” L R. Receiving Tupe 2-7/8” O.D. X2-5/8” I.D. x 2-7/8” L

S. C-Frame 6.25" x 2.25" (on center) T.Receiving Tupe 2-1/2” O.D. x 2-1/4” I.D. x 3/4” L U. Screw

• Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints.
• Excellent for removal and installation of press-fit parts such as ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• Allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle.
• Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.

User questions & answers

Question:	does this have the angle cup
Answer:	These tools fit most compact cars, mid-size cars, and light pickup trucks. You could make sure whether it is compatible with your vehicle or not according to the jaw opening & pull travel of each part. Thank you.
Question:	Would this set also work for bushing removal
Answer:	Lol that's the best one iv heard all year and with that being said really use your brain I brought all the ball joint press from a friend who had it for 35 years I walked away from one second to cut out a half moon out of a bearing race to make it work for the lower arm and my friend decided to pull my Jack handle out and put it on the breaker bar on the ball joint press while I was inside grinding let alone $1,400 later I found an original one on eBay and replaced my buddies because of my buddies no buddies but my buddies pay my buddies lol wait what? Keilth tools I believe can't spell
Question:	where is it made
Answer:	Yes, it should work fine. Used this set for several different years of gm trucks so far. Be sure and oil the screws before you use them or it will eat the threads out of the aluminum.
Question:	Does it fit Chevy
Answer:	Yes works on most dodge tucks overhauled my 06 front end with it

Product features

Adjust Anchor Pins

Dis/Assemble a U Joint

Remove a Ball Joint

Installation a Ball Joint

Specifications:

Package Quantity: 10 pieces

Tools Material: Carbon steel

Surface: black-oxide finish

Suitcase Material: ABS plastic

Package Dimensions: 11” x 3” x 15” in.

Package Weight: 16 pounds

Compatibility:Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).

Part Description:

A. Receiving Tube(2-1/4" L x 2.723"I.D. X 3" O.D.)

B. Receiving Tube(1-3/4" L x 2-1/4"I.D. X 2-1/2" O.D.)

C. Receiving Tube(1-3/4" L x 1-3/4"I.D. X 2" O.D.)

D. Installation Adapter(1.122" L x 0.941"I.D. x 3" O.D.)

E. Removal Adapter(1.148" L x 1/2" I.D. x 3" O.D.)

F. Jackscrew

G. Install Cup Adapter(0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H. Ball Joint Press

I. Reciving Cup(2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J. Installing Cup (3.676" L x 1-3/4" I.D. x 2"O.D.)

• EASY OPERATION: Use our 22PCS Ball Joint Press Set with multi-size adapters to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• UNIVERSAL COMPATIBILITY: This tool set works with most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, or vehicles with the Dana 28, 30, 35, 44, 60 axles.
• PROFESSIONAL-GRADE DURABILITY: Built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion.
• ALL-IN-ONE TOOL KIT: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tubes, 1x Removal Adapter, 1x Screw, 1x Sleeve.
• PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty ABS plastic blow-molded carrying case with handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.

User questions & answers

Question:	Will this fit a ball joint on a 1999 Escalade
Answer:	I dont know it didnt fit the bottom ball joints on my dodge ram 2500 but it did fit the top ones so its half of what I needed.
Question:	Will this fit a 1999 Escalade
Answer:	I dont know it fit the top ball joints on my dodge ram 2500 but not the bottom ones so good luck.
Question:	Will this fit jeep cherokee aor do i need to purchase a jeep adapter kit
Answer:	I just replaced my ball joints on a WJ 2000 Jeep grand Cherokee with this tool.
Question:	Is there a warrant
Answer:	Like an arrest warrant?

Product features

Practical and Professional Tool Set

This ball joint press removal tool kit is enclosed inside a heavy-duty ABS portable carry case for safe storage and easy access. Quickly keep your tool set organized.

Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and pickup trucks that have press-fit type ball joints.

Heavy-duty Steel Workmanship

Constructed with heavy-duty forged solid carbon steel to easily endure a lifetime of wear and tear.

Premium Impervious Finish

Coated with a rust-resistant black oxide finish to cut out corrosion and keep you working until the job is done right.

Indispensable C-Clamp

The C-Clamp is essential for U-joints and makes removing and installing all ball joints a much easier process.

Intuitive Craftsmanship

Designed with interlocking and interchangeable attachments for an effortless removal/install process.

Package Content:

Ball Joint Remover -- A C-Frame Press -- U Installer -- Q Installing Adapter -- N Installing Cup -- C, H Live Center Forcing Screw Plug -- S

Receiving Cup -- F, P, I Receiving Tube -- D, E, G, J, K, L, O Remover -- R Remover Cup -- B Removing Adapter -- M

C Frame Screw

Receiving Tube 2-1/4" X 3" Receiving Tube 1-3/4" X 2-1/2 Receiving Tube 1-3/4" X 2"

Install Adaptor Remover Adaptor

Center Plug O.D. 7/8"

Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 3/4" Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"

Remover Installer O.D. 1-7/16", I. 3/4" Length 1" Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"

Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4" Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"

Receiving Cup O.D. 2-1/4", I. D. 2" Length 2" Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 2-3/4"

Installing Cup O.D. 2", I. D. 1-3/4" Length 2-5/16" Receiving Cup O.D. 2-7/8", I. D. 2-5/8" Length 3-7/8"

Receiving Cup O.D. 2-7/16", I. D. 2-3/16" Length 3-3/16" Install Cup O.D. 2", I. D. 1-3/4" Length 3"

Product description

You know just how frustrating it can be when you’re removing or installing ball joints and you don’t have the proper balljoint remove and install tools to get the job done. With the OEMTOOLS 37310 Master Ball Joint Installer/Remover Adapter Set, you’ll be busting out ball joints in no time. The ball joint press adapter set, to be used with the OEMTOOLS 27032 Ball Joint Press, includes 14 pieces to speed up your repairs: 8 receiving tubes, 2 receiving cups, 1 plug, and 1 remover/installer. There are so many different vehicles with varying ball joints, you’re going to need a ball joint press adapters set for the multitude of vehicles coming through your garage. The 8 receiving tubes in the ball joint separator kit feature different sizes to match a wide range of vehicles and allow you to work with pickups, vans, SUVs, and imports. Instead of using hammers or pry bars to loosen ball joints, save the time and physical strain with the ball joint tool and ball joint remover kit. Add this ball joint remover tool kit to your garage for less stress and more efficient work. To use with the ball joint press, select the necessary adapter in the ball joint tool kit that fits your ball joint. Assemble the ball joint press with the selected adapter from the ball joint service kit over the ball joint. Using a ratchet or wrench, turn the pressure screw until the ball joint is removed. The full ball joint adapter set includes: 2.99 x 2.75 x 2.28 inch receiving tube, 2.75 x 2.44 x 2.28 inch receiving tube, 2.87 x 2.63 x 3.41 inch receiving tube, 2.50 x 2.22 x 2.80 inch receiving tube, 2.50 x 2.18 x 3.64 inch receiving tube, 2.24 x 2.00 x 2.52 inch receiving tube, 2.50 x 2.26 x 2.00 inch receiving tube, 2.50 x 2.22 x 0.76 inch receiving tube, 2.00 x 1.77 x 3.67 inch installing tube, 2.00 x 1.81 x 2.91 inch installing tube, 2.21 x 1.81 x 0.98 inch receiving cup, 2.24 x 1.88 x 0.82 receiving cup, 0.86 x 0.64 x 3.01 inch plug, and a 1.44 x 0.81 x 1.00 inch remover/installer.

• EXPAND REPAIRS: The ball joint remover tool set, to be used with the OEMTOOLS 27032 Ball Joint Press, provides you with several sizes of installing tubes, receiving tubes, and receiving cups; Remover/installer included
• MORE VEHICLES: With the ball joint adapters set, you can work on a wider range of vehicles including pickups, vans, SUVs, and imports; Ball joint adapter kit works on many GM, Ford and Chrysler 2WD and 4WD pickups
• DIFFERENT SIZES: The ball joint kit includes deep and shallow receiving tubes and receiving cups for many sizes of ball joints, giving you more versatility during your repairs
• DURABLE: Made with ultra-strong steel, you won’t have to worry about the ball joint separator kit bending, breaking, or snapping; You’ll have this ball joint removal kit for years to come
• EASY ORGANIZATION: All 14 tools in the ball joint remover and installer kit fit nicely inside a super durable blow mold case; Allows you to transport the ball joint tools kit from job to job without hassle

Product description

The Astro 78100 Goliath Ball Joint XL C-Frame Press boasts three times the throat space and features a notched foot that allows for the pressing out of ball joints without the removal of the top mount grease fittings. The large ball joint Press in this unit is for maximum clearance and for the effortless use of the tall and stacked adapters. The unit includes both long and short drive screws to maintain a shorter overall working length when desired.

• Large ball joint press for max clearance and easier use of tall and stacked adapters
• Includes both long and short drive screws to maintain a shorter overall working length when desired
• Features 3X the throat space and includes a notched foot that allows for pressing out ball joints without removal of top mount grease fittings
• Astro's new forged alloy steel
• 9.1" throat, 11.9" length

User questions & answers

Question:	What are the dimensions of the C is it bigger than 8 in on the inside where the screw comes in and the cups go
Answer:	HI. Thank you for your interest. The 12-inch bag can hold up to 20 pounds . And it is 12" wide, 7 in" long and 9 " high. Have a wonderful day
Question:	Will this work on u-joints
Answer:	this is a very sturdy tool bag it is all cloth it has a hard bottom but again it is cloth on the out side if this helps it does hold all my tools i need
Question:	does this work with the OTC and Astro ball joint adapters
Answer:	Seems like answers vary depending on the bag purchased. I have the 24-inch bag and it has 10 interior pockets, 5 per side, and 16 exterior pockets, 6 per side and 2 on each end.
Question:	Can i get the 2 thread bolts by itself to buy
Answer:	There is no leather in its construction, to my understanding; the strap is nylon and the shoulder pad is some gel stuff wrapped in what I assume is polyester. The hooks are metal.Overall, it's durable.