13 best otc weight bars

Product description

Engine Support Bar, For Use With Cranes or Hoists, Lifting Capacity 700 lb., Material Steel

From the Manufacturer

SPX OTC 3-Point Engine Support Bar features innovative self leveling design. It is compatible with all the vehicles and particularly with those which has sloped hoods.

• Auto & Truck Maintenance
• Country of manufacture: China
• Manufacturer: OTC
• PVC-coated support legs

User questions & answers

Question:	Can this be used to raise an engine also
Answer:	Not what its made for, but the large wing nuts could be used to move the engine up and down a few inches to change like a motor mount?
Question:	What are the cables rated for that come with this
Answer:	The unit is rated at 700 pounds so the cables should be good for 700 pounds
Question:	has anyone used it on subaru engines
Answer:	I frequently work on Subarus and I've never used an engine support on them. It's just not needed in my opinion. The center of gravity on a Subaru engine (at least and EJ series, I am unsure of FA series center of gravity) is pretty centered to the point where the mounts hold the engine in place pretty well.
Question:	Is this unit large enough to raise a 2002 f150 engine to change oil pan
Answer:	Given how far back the engine sits in those models, you're likely better using an actual engine hoist instead of just a support. If this one works at all for that it would probably have to be positioned front to rear rather than side to side. I've not replaced just the oil pan, but I have replaced the entire engine in one of those body styles and you'll have to remove the intake manifold to raise it at all. Good luck.

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

The OTC 7175 is a set of indexing pry bars. The pry bars and indexible to 180° for better access and features 14 locking positions for leverage in multiple applications. Knurled handles assures a sure grip and these pry bars meet or exceed ANSI specifications for prybars. Includes OTC 7172 10”, OTC 7173 12”, and OTC 7174 15” indexing pry bars.

• Indexible to 180 degrees for better access
• 14 locking positions for leverage in multiple applications
• A knurled handle assures a sure grip
• Meets or exceeds ANSI specifications for pry bars
• Includes OTC 7172 10 inch, OTC 7173 12 inch, and OTC 7174 15 inch indexing pry bars

User questions & answers

Question:	Where are these made
Answer:	Taiwan, they all are when you look in to it. Even the gear wrench are identical to these are made in Taiwan. Have a real long one that is matco. Guess what? If look hard enought. Made in Taiwan. They work really good though.
Question:	how are these compared to gear wrench
Answer:	Not sure compared to gear wrench but quality is not in these... broke 2 out of 3 so far. The end caps fall out and loose parts

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

The hub puller is designed to push the drive axle out of the wheel hub center or pull the hub off the drive axle. The adjustable puller legs fit virtually any hub configuration and the 5-bolt plate allows for quick attachment to bolt patterns. Any technician who has ever run across an axle frozen into a hub or similar will benefit from this tool. Applying heat or directly striking the axle and or hub components typically results in damage and requires replacement. This tool will eliminate that damage along with saving time and money of replacement.

• Adjustable sliding legs can be positioned anywhere on center hub
• Wide range of 4 inch to 8 inch + bolt circle
• Forged puller assembly with 1 inch drive screw
• Recommended for use with impact gun and/or striking with a hammer
• Additional legs can be added to center hub for special applications

User questions & answers

Question:	Will it fit Toyota FWD 5 lug cars? It looks like it will. Is the center hole big enough to go around the wheel centering flange on the front hubs
Answer:	I can't say because I'm a Cat mechanic and don't work on cars,but if you need me to measure any part of it,I will.Roger @ 925-383-5144
Question:	Otc 6574 comes with a 5-bolt plate and no striking wrench. other than that is it the exact same as the otc 7394 version, eg size and quality
Answer:	It's the same thing, same quality, same company... If you get the one with the 5 bolt plate, then you get no striking wrench. If you get the one with the striking wrench, then you get no adapter plate. What does the trick with this puller, or any other puller, is to load it up as tight as you can and give the end of the puller a good whack with a fairly large hammer. The trick is to not to keep banging on it. After you gave it a good sharp blow (maybe twice), then you load the puller again. Continue this action until your hub comes off. Banging on the hammer wrench creates a side ways action which may distort the threaded axle of the puller or bend your axle.
Question:	Would I be able to use this with a slide hammer instead
Answer:	You would have to manufacture the slide hammer shaft with the Hammer attached with one end threaded, then you would be taking a chance on stripping the threads, which would mean you would have to manufacture a new upper piece for the original tool. The original tool got all my brake drums off my 1941 Ford Tudor Sedan where the wheel cylinders leaked fluid on the brake shoes swelling them up to where the drums would not rotate. Had to replace everything, all works well. I highly recommend this tool for removing old stuck brake drums!
Question:	Will this fit on a 2015 Ram
Answer:	Check with manufacturer - I'm not sure

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

OTC brand (model 2501) over the door cervical traction kit. Used to relieve pressure on muscle, nerve tissue and minor fractures of the cervical spine. It is easily set up for home use. The sturdy metal bracket fastens over any door, and the weight bag is calibrated from 2 lbs. to 20 lbs.; easy to fill with ordinary tap water. Kit Includes: Head halter, padded and adjustable; metal spreader bar; metal door bracket; door hanger and two pulleys; section of rope; water weight bag.

• OTC brand model 2501 for men and women; Over the door kit expands head and neck, reduces compression
• Use for physical therapy, neck traction, minor cervical spine fractures, disc bulges, pinched nerve
• Tool free assembly, fits over any door, fill with water to calibrated weight bag from 2 to 20 lbs
• Pressure relief on herniations, arthritis, tendons, muscle tissue, Adjustable size fits most adults
• Latex-free head halter, spreader bar, door bracket, hanger, two pulleys, rope, and water bag

User questions & answers

Question:	Is the water bag latex free
Answer:	I don’t use the bag .. I use small dumb bell weights
Question:	Is the head halter padded
Answer:	It has a little padding. Enough to be comfortable.
Question:	I have read that at least 12 lbs should be used for 15 minutes per session. is this correct? how many sessions per day or week
Answer:	My physical therapist uses 15 lbs on almost everyone. I've had up to 20 lbs on my neck during therapy. I use 16 lbs at home though, just to be safe cause it's my neck, you know :)
Question:	I need a larger head harness the one i purchased don't fit
Answer:	I have a large head too and had no problem. Hat size 7-1/2.

Product features

OTC Cervical Traction Kit

Used to relieve pressure on muscle, nerve tissue and minor fractures of the cervical spine. It is easily set up for home use. The sturdy metal bracket fastens over any door, and the weight bag is calibrated from 2 lbs. to 20 lbs.; easy to fill with ordinary tap water.

Kit Includes: Head halter, padded and adjustable; spreader bar; metal door bracket; door hanger and two pulleys; section of rope; water weight bag.

Indications Listed Below

• Easily set up for home use

• Sturdy metal bracket fastens over any door

• Weight bag is calibrated from 2 lbs. to 20 lbs.

• One adjustable size head halter fits most adults

• Acute cervical injury

• Osteomyeltitis

• Spinal instability and hypermobility

• Tumors

• Rheumatoid arthritis

Product description

OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road. With the lowest clearance available - 3-1/2 inches at it's lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches, this versatile jack is perfect for occasional use in your home garage or for the heavy user at a busy shop. Removable handle provides 360 degree access to load and T-handle design makes maneuvering the jack easier. Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use. Two-year limited warranty. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road
• Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches
• Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier
• Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use
• Two-year limited warranty

User questions & answers

Question:	I have a 2020 indian scout (abs). will this work
Answer:	Hello! Thank you for your interest in GeoZilla GPS Tracker! You can set the frequency of location updates from 5 to 30 minutes.
Question:	Could this be multipurpose ....used to lift mowers, atv's etc. to work underneath them? Maybe if I fabricated an accessory
Answer:	Thank you for your question! '5 minutes' is the minimum interval for the location to be requested automatically. You can always request an update by tapping 'refresh' in the application. This way, the location will be updated within a minute. If you have any questions, please send us an email at our support email address (it can be found on our official website).
Question:	I see the skids are 17" long, but what size is the overall lifting area and how wide are they
Answer:	No
Question:	I have a 2014 Road King is there any other parts needed to lift this bike
Answer:	Hello, this device will work in all the world. In case of an emergency situation, the device will inform your GPS coordinates to the rescue team in the country where the device is reprogram and this team will contact the rescue team of the country where you are at that moment. Thank you

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

Installing a ball joint on a lower control arm typically requires the effort of two people. However with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.

• Installing a ball joint on a lower control arm typically requires the effort of two people
• With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job
• Lifetime limited warranty

User questions & answers

Question:	Will this fit a square prybar thats 5/8in sides, specically the Matco 3ft prybar
Answer:	Yes, I use mine with a Matco pry bar that it 5/8" square. It has room for an even larger bar, although that might be limited by the size of the tip of the bar.
Question:	How do you remove the pressure fm the stabilizer bar with this tool (when using instead of chains)? does it help to remove inner end of the lcarm
Answer:	I. Use this to pry down the lower control arm when disconnecting the ball joint from the spindle. Sometimes yes you do need to remove the sway bar end link from the lower arm. This makes it easier than a chain which I have used . Jobs used on....Wheel bearings, c.v axle r r, and ball joint work. Hope this helps.
Question:	How does this tool works
Answer:	Hi there,It's a good tool .You use it to dissamble lower ball joint from the Knuckle .You use the bigger hook to hold the control arm and in the smallest hole you can slide your crow bar.After that you just have to pry down to get your ball joint out .It works Ok
Question:	I've never seen this tool before, can someone explain how it works
Answer:	The tool is up side down in the photo. Slide the long, straight side over the control arm, insert a pry bar through the eye of the tool and pry down to move the control arm. Simple and works great.

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

The OTC 6720-3 covers 1/2" to 5/8" (12mm to 16mm). This flare nut locking plier is designed for use on new or damaged flare nuts that have been rounded or rusty. The angled jaws allow for clearance around frames and bulkheads and fits around standard or metric nuts and bolts.

• Fits standard or metric nuts and bolts
• Angled jaws allow for clearance
• Designed to use on new or damaged flare nuts
• Can be used on rounded or rusty flare nuts
• This item is included in the 6720 set

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

Did you know Prilosec OTC can stop frequent heartburn before it begins? Heartburn happens when stomach acid refluxes into the esophagus. Prilosec OTC is a proton pump inhibitor (PPI) that can block heartburn at the source. The active ingredient in Prilosec OTC, omeprazole, passes through the tough stomach acid, turning down acid production. The long-lasting delayed-release formula provides 24-hour frequent heartburn relief. Take 1 pill a day for 14 days and experience what zero heartburn feels like. *Confirm with insurance provider

• 1 pill a day. 24 Hours. Zero Heartburn
• #1 Doctor, Gastroenterologist and Pharmacist recommended frequent heartburn treatment for 15 straight years. May be HSA/ FSA eligible.*
• Long-lasting delayed release formula for 24 hour relief*
• Over 30 Million Americans have used Prilosec OTC to treat their frequent heartburn
• Block heartburn at the source so you can stop heartburn before it begins*
• Satisfaction guaranteed or your money back

User questions & answers

Question:	Is this really $160 for 42ct, or are there several boxes of 42ct included in this price? The same box is $24 at Walgreens
Answer:	If your kid has reflux look at his fluoride exposure: drinking water,bath water[steam], toothpaste,mouthwash, and [prescription drugs] . For more info check out Fluoride Action Network online. These scientists will inform you of the fluoride lie and are currently suing the pants off EPA to stop fluoridation and winning. F is poison. Look" up chemistry of : [whatever drug ]" and if there is an F in the equation please avoid it!
Question:	i want to know this product from P&G? and the photo show "product of Sweden" or Origin: Imported (India
Answer:	There is a long answer to this on their website under “product-specific questions.”
Question:	Is this product in blister packs? I refuse to buy anything in these frustrating packages. If it is bottles, OK. Thanks for your reply
Answer:	Yes. But this works better for some reason. For 15 years, I've been taking prevacid and zantac EVERY DAY. I take a daily med that causes this. One day I was bike riding w my teen son. I had horrible heartburn and we were too far from home to go back. The only store was whole foods. I'll be honest, I was super skeptical but also desperate so I bought these and one tablet worked wonders. I am now taking one a night and haven't taken my OTC meds in a week. Oh and also, tums didn't usually work for me so there must be something abt the herbal blend that helps.
Question:	what is the expiraton date on the item you are offering for sale
Answer:	GASTRICELL is made in Japan. The key ingredient of GASTRICELL is a novel strain of probiotic, L. Johnsonii No. 1088 is patented in Japan, Korea and the United States for strain, function and application (patent numbers: 4457364, 5075254, KR101061143, KR101451188, US 9243300 B2). Developed by Tokai University School of Medicine, Japan, it addresses stomach problems such as gastric discomfort, gastric acid backflow and chest-burning sensation effectively to provide long-term soothing effects.

Product features

Why Choose Prilosec OTC?

Prilosec OTC (24HR) reduces stomach acid production by shutting down many of the pumps in the stomach that produce acid, so you don't get heartburn in the first place.*

It's possible while taking Prilosec OTC. Use as directed for 14 days to treat frequent heartburn. Do not take for more than 14 days or more often than every 4 months unless directed by a doctor. Not for immediate relief.

Acid Controllers

Acid controllers, or H2 Blockers (12HR), only partially reduce acid production by blocking just one of the signals that tell your body to produce acid. Relief starts in as little as 30 minutes, but only lasts 8-12 hours.

Antacids

Antacids (3HR) neutralize the acid in the esophagus that causes heartburn, but do not reduce the production of stomach acid. Relief is immediate, but only lasts for 1-3 hours.

Product description

OTC brand (model 2543) Orthotex knee stabilizer with hinged bars. Made from Orthotex fabric, an open 3 dimensional knit that is a non latex alternative to neoprene. It offers breathability, elasticity, therapeutic compression, comfort and heat control. It is less hot to wear than neoprene, thus appropriate for long term wear or wear in warm climates, and ideal for wearers who are allergic to or irritated by neoprene fabric. Excellent support and medial-lateral stability; hinged bars include flexion and hyperextension stops; upper and lower hook and loop encircling straps are adjustable and removable. Universal design will fit on left or right knee. Available color options: black.

Use For: Medial / lateral knee instability, chondromalacia, osteoarthritis, compression and support

• Polycentric hinged bars, with flexion and extension stops, provide excellent side-to-side stability.
• Multi-directional stretch material provides even compression over all the anatomical prominences of the joint; Hook and loop encircling straps help maintain stabilizer in correct position for comfort and support.
• Buttress pad may be cut and removed in quarter sections for precisely targeted pressure over the soft tissues.
• Included stay-fresh microbial resistant treatment. Orthotex is an alternative to neoprene. Materials are completely latex-free.
• Measure around the bend of the knee. Available Sizes: Small (13-14 Inches), Medium (14-15 Inches), Large (15-16 Inches), X-Large (16-17 Inches), 2X-Largte (17-18 Inches), 3X-Large (18-19 Inches), and 4X-Large (19-20 Inches).

User questions & answers

Question:	whats the dimension for a xl size
Answer:	Hello. I have this knee brace and I'm a "big" guy. I go 6'4" tall and weight 300 pounds. I have very large thighs and calves. This brace fits me just great. The wonderful thing about this brace is that is totally adjustable. Say, if your knee area is swollen for whatever reason, the brace would still fit. If you knee area has gone down to its normal size, again, this brace is so adjustable that you just make it a bit smaller with the velcro straps at the top and bottom of the brace. If there is anything else I can help you with, please don't hesitate to post a question.
Question:	I am confused about sizing, when it says the Large size "Fits 15.5-16.5 inches" you are talking about the size at the knee, thighs or what
Answer:	It confused me too until I got it. They mean the circumference at thigh area... but stretches, the bad news? it would not stay up when you ambulate
Question:	I need a 3x. Is there a size chart
Answer:	Yes it comes up to XXL, however I must tell you that it is best worn while lying down. if does slip down. Even the doctor told me when he prescribed it.
Question:	where is the size chart
Answer:	My husband is a BIG guy. About 275 lbs and is about 5'9 or 10" ... An XXL was too big for him. XL fit perfect.

Product description

Coffee Cup Wall Art "Perk" up your home's decor with these metal cups to accent your favorite coffee nook. With the look of steam rising from each mug, they'll give your kitchen a warm and inviting look. A great gift for your favorite coffee connoisseur ! Cups read "latte", "mocha" and "java". Set of three. Each measure:6"L x 4 1/2"W.

• Set Of 3
• metal
• Three dimensional
• Measures 6 3/4" H x 5" W

User questions & answers

Question:	So let me get this straight, when you order one, you will get 3 metal cups, what is shown
Answer:	Yes that’s correct, 1 order is all three metal cups
Question:	When ordering 3, will they be 1 of each
Answer:	Order 1 and get what is shown...Love mine
Question:	Is this one whole piece or is each piece separate? Also how big are the
Answer:	This is a three piece set with each piece measuring 8x5 inches. arrange as you like!
Question:	what are the dimensions per cup
Answer:	The size of ea. cup is about 3", not including the steam. But when you add the steam and the size of the cup together the total size of ea. cup is about 7.5".

Product description

OTC brand (model 2087) lightweight breathable eight inch wrist thumb splint. Constructed from an open cell urethane foam laminated to a lycra fabric for comfort, breathability and moisture absorption. An excellent choice to treat DeQuervain's Tendinitis, strains and sprains of the MCP joint, basal joint arthritis, advanced carpal tunnel syndrome and cumulative trauma disorders of the thumb and wrist. Proximal circumferential strap provides superior fixation of the radial stay which allows for excellent immobilization of the thumb. Distal palmar crease contour allows for 90 degree palmar flexion and full finger dexterity. Perfect for latex sensitive wearers. Available for the left hand (model 2087/L) or right hand (model 2087/R).

Use For: DeQuervain's tendonitis, strains and sprains of the MCP joint, basal joint arthritis, advanced carpal tunnel syndrome, cumulative trauma disorders of the thumb and wrist

• Holds the wrist in a neutral position and the thumb abducted to promote healing and minimize pain.
• Adjustable radial stay; removable palmar splint restricts wrist flexion; adjusts for varying degrees of support.
• Thumb strap adjusts to accommodate for swelling and various size thumbs.
• Durable lightweight urethane foam glove laminated to lycra. Soft lined interior is breathable and offers unparalleled wearing comfort. Three independent hook-and-loop fasteners permit easy one-handed adjustment and closure. Choose Left or Right hand options.
• Measure around the break of the wrist. Available Sizes: X-Small (4.5-5.5 Inches), Small (5.5-6.5 Inches), Medium (6.5-7.5 Inches), Large (7.5-8.5 Inches), and X-Large (8.5-10 Inches).

User questions & answers

Question:	W hat to do with the ends of the long straps? they stick out like a bird's wing
Answer:	It's ok to just trim them with scissors.. round the corners so they're not poking..
Question:	I'm right on the size border between M and L. Any suggestions as to whether to go bigger or smaller? I've never worn a wrist brace. Thanks
Answer:	I would go smaller. They seem to expand pretty well but if the smallest size you can make the large is right at your size it might be too loose.
Question:	I measured and I am right at the 7.5" should I get the medium- the 7.5" is at the edge.. or should I get the large and worry it will be loose
Answer:	My wrist is 6.75 and it fits perfectly. The securing straps allow me to tighten it. You certainly don't want it to be loose.. that's the whole idea... i'd go with the medium... and make sure the thumb strap is tight... that's the important part of keeping the thumb from moving around... as the tendons from the wrist to the thumb is what's aggravated. It's a great price and a great product
Question:	Has anybody tried to type with the brace on? Have you found it not too bulky
Answer:	It depends on which is your dominant hand. I have deQuervain's in both wrists and find no problem with the splint on my left (non-dominant hand), but it is nearly impossible on my right to hit the space bar. I type as a profession (medical writer), an am on a computer 8-9 hours a day (and am typing with a brace on my left now). That said, these braces make you hold your hands in the proper ergonomic position, so if you have huge difficulties typing with them (save for the space bar), you probably aren't holding your hands appropriately in the first place. Over the years (nearly 5 for me now), I have actually altered my typing stance from wearing these braces, and saw a reduction in the deQuervain's in my right (dominant) hand. Left is still bad (and has had surgery), but that appears to be more due to my particular physiology.

Product features

OTC Wrist-Thumb Splint, 8-Inch Adult, Lightweight Breathable

• Advanced CTS (Carpal Tunnel Syndrome)
• Arthritis (Basal Joint)
• Basal Joint Hyperextension
• Cumulative Trauma Disorders
• DeQuervain's Tendonitis
• MCP Joint Sprains & Strains

FEATURES

Distal palmar crease contour allows for 90 degree palmar flexion and full finger dexterity. Constructed from an open cell urethane foam laminated to a lycra fabric for comfort, breathability and moisture absorption. The proximal circumferential strap provides superior fixation of the radial stay which allows for excellent immobilization of the thumb. Perfect for latex sensitive wearers.

• Holds the wrist in a neutral position and the thumb abducted to promote healing and minimize pain
• Adjustable radial stay, removable palmar splint restricts wrist flexion, adjusts for varying degrees of support
• Soft lined interior is breathable and offers unparalleled wearing comfort
• Adjustable thumb strap accommodates for swelling and various size thumbs
• Three independent hook-and-loop fasteners permit easy one-handed adjustment and closure
• Black color obscures soiling, provides a low profile appearance

Product description

OTC's 5 lb. basic slide hammer assembly can be used with various adapters for a multitude of pulling jobs. Excellent choice for use with OTC internal pulling attachments. Also works well with internal/external threaded adapters or any other tool that can benefit from a 5/8-18 male threaded slide hammer. 24 inch long assembly gives you plenty of length to generate the force needed for most jobs. High-grade materials ensure quality performance over the lifetime of the tool. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC's 5 lb. basic slide hammer assembly can be used with various adapters for a multitude of pulling jobs
• Excellent choice for use with OTC internal pulling attachments
• Also works well with internal/external threaded adapters or any other tool that can benefit from a 5/8-18 male threaded slide hammer
• 24 inch long assembly gives you plenty of length to generate the force needed for most jobs
• High-grade materials ensure quality performance over the lifetime of the tool

User questions & answers

Question:	i need to pull dowels in a die shop. it says the threaded end is 5/8 - 18 so where would one get the cap for the bolt, or do i have to just make one
Answer:	You have to make or buy one for your application. I welded a 5/8-18 bolt to a set of vise grips to pull stuck pins.
Question:	would this help getting cv shaft out and how
Answer:	I don’t know if it will work for you (connection to cv shaft) It does a very good job, right up until you need a hydraulic press mike
Question:	Does this slide hammer come in a case
Answer:	Sorry, no case. Just the slide hammer.
Question:	What’s the width of the shaft
Answer:	I would guess about 3/8" or 1/2" without measuring it. It is very strong and made very well. I have used it several times on different applications and it works fine. Just about every tool that is designed to attach to a slide hammer will work with it. I have purchased several different types and all have fit.

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks in a blow mold case. Rear axle bearing puller fits minimum bearing tube I.D. of 1" and max axle tube I.D. of 1-7/8". Rear axle bearing puller fits minimum bearing tube I.D. of 1-5/16" and max axle tube I.D. of 2-3/8". Rear axle bearing puller fits minimum tube I.D. of 1-3/8" and max axle tube I.D. of 2-7/8". Slide hammer tee bar and Slide hammer 5 LB head weight. Pulling hook rear axle pulling plate and bearing cup remover.

• Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks
• Includes 3 sizes of rear axle bearing pullers
• Slide hammer tee bar and Slide hammer 5 LB head weight
• Pulling hook rear axle pulling plate and bearing cup remover
• Blow molded case

User questions & answers

Question:	Toyota corolla 2002 , will it fot on my front wheel hub to replace assembly
Answer:	It should as long as the yoke fits your bolt pattern. I have only used mine for pulling bearings and races. For hub assembles I just use Kroil (best penetrating rust bust) and hammer them out. Never had a problem that way
Question:	Will the largest puller attachment pull the rear axle bearings on my 2005 Ford F 150 4X2 8.8" 31 spline axle
Answer:	It should. I pulled axle bearings multiple times out of a 2001 ford f150 4x2. I do not remember the axle size but it was a v6 so might have been a smaller one

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.