10 best oil filter wrenches

Product description

For filters up to 4-1/2 inches in diameter, choose the TEKTON 12 in. Oil Filter Pliers. The three-position slip joint design quickly and easily adjusts to size. For a sure grip on slippery, oil-covered filters, large teeth are set at a right angle so that they bite in either direction. Long handles with soft, nonslip grips offer extra reach and leverage in tight places to go where band-style wrenches can't.

• Fits oil filters from 2-1/4 inches to 4-1/2 inches in diameter
• Three-position slip joint design quickly adjusts to size
• Right-angle teeth grip while turning in either direction
• Long handles reach into tight spaces
• Soft, comfortable grips offer nonslip control

User questions & answers

Question:	will this work on a 2014 nissan frontier 4.0 liter
Answer:	It is 6" plus 6" back to ball, so more like a 12" bungie, but when you double back for the loop around the ball it ends up being 3".
Question:	Can I use it for my 2006 Kawasaki Er6n
Answer:	Huge balls. GIANT
Question:	can i use this for 4.5 inch
Answer:	My guess is, it depends on how the bungee is being used. If one is using it to stretch the entire unit around an object, (much like a rubber band is placed around a rolled newspaper), the "ball to ball" length, ( measured in it's passive state and then it it's fully stretched length ),would be in accordance with the 12" rating.( Note: The "ball lock / anchor" feature is really of no use in this application.) - - -- Otherwise, given the intended "ball lock / anchor - fastener" key feature of the design, the same rules would apply to the 6" minimum rating instead. Based on this key feature of the design, ( which is the ball anchor / fastener ), it seems to me that the advertised 6" specification is correct accordingly. Note: Using the 6" specification, my bungee has a "minimum" stretch of 6". The approximate "maximum" was 14". Using the 12" specification, using it as a "newspaper rubber band", it will contain a minimum circumference of 12" and a maximum circumference of 28" accordingly.
Question:	What is the smallest diameter this will work on
Answer:	I have tied two 8x10 ft tarps to shade the cars under a pole barn. attached them to eye bolts and the elastic works well when the wind blows so far up to about 35mph. I live florida so will disconnect for something tropical. Really like them.

Product features

TEKTON 5866 12-Inch Oil Filter Pliers

With a quick-adjust slip joint design and large teeth, the TEKTON 12-inch Oil Filter Pliers removes and installs filters up to 4-1/2-inches in diameter, gripping even slippery, oil-covered surfaces.

Quick Adjustment

Strong and reliable, the three-position slip joint design quickly and easily adjusts to size, fitting filters up to 4-1/2-inches in diameter.

Sure Grip

Large teeth are set at a right angle to the jaw so they bite in either direction for a sure grip on slippery, oil-covered filters.

Long Reach

Long handles with soft, nonslip grips offer extra reach and leverage in tight places, going where most band-style wrenches can't.

Product description

Tough, stainless steel band with permanently bonded textured coating for superior gripping power. Swivel handle makes it easy to turn in tight spots. Handle swivels more than 180 degrees with adjustable tension. Tension adjusting nut allows swivel pressure to be regulated. Patent pending coating process adds many additional gripping points to securely grab the filter. Specially designed tab keeps grip from sliding off the handle. Has a 3.5 to 3.875 (88.9 - 98.4 mm) range. Fits most popular 3.625 size standard filters.

• Tough, stainless steel band with permanently bonded textured coating for superior gripping power
• Has a 3.5 to 3.875 (88.9 - 98.4 mm) range
• Fits most popular 3.625 size standard filters
• Package dimension is 6.5 inches width by 10.75 inches height by 1.5 inches depth

User questions & answers

Question:	Will this work for a lawn tractor size filter
Answer:	Probably too big as most lawn tractors use a smaller filter. Works fine on a Kubota L4600 though if you call that a "lawn tractor".
Question:	Will it fit a 2000 Chevy Blazer
Answer:	This fits a bigger filter for me. FL1A mortorcraft or I use a AC 454 for my truck. Any smaller filter you will need different one. It is nice filter wrench though.
Question:	Will this work for my 2004 F
Answer:	How big is your oil filter? Look at the handle and it will give you the ranges that it will work on.
Question:	Would this oil filter wrench fit 6.7 cummins diesel oil filters
Answer:	It should. I used it on my Duramax's oil filter and fuel filter-(much larger diameter than oil filter) with no issues. Worked great for both, especially with the swivel handle

Product features

Lisle 57030 Standard Oil Filter Swivel Wrench

3.5 - 3.875 (88.9 - 98.4mm) Range. Fits most popular 3.625" standard filters. Tough, stainless steel band with permanently bonded textured coating for superior gripping power...won't slip.

Description

Swivel handle makes it easy to turn in tight spots. Handle swivels more than 180° with adjustable tension. Tension adjusting nut allows swivel pressure to be regulated...no more floppy filter wrenches. Coating process adds many additional gripping points to securely grab the filter. Specially designed tab keeps grip from sliding off the handle.

Product description

The OEM TOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench is the best oil filter wrench for a secure grip while removing oil filters from a variety of vehicles. This oil filter removal tool kit fits standard oil filters on many passenger vehicles and light trucks. The versatile oil filter diameter range from 2.4 inches to 3.6 inches makes this adjustable oil filter wrench useful as a car filter removal tool, tractor oil filter wrench, motorcycle oil filter wrench, or lawnmower oil filter wrench. And these oil filter wrenches include a 3/8" to 1/2" drive adapter to use as a ratchet oil filter wrench with varying ratchet drives. This oil filter adjustable wrench features three spring-loaded jaws and a magnetic base attachment designed to grip a range of standard oil filters. The magnets and spring-loaded jaws keep this 3 leg oil filter wrench securely in place and reduce slippage as you remove oil filters. And the convenient compact design of this lightweight claw oil filter wrench makes it much easier to use in tight, hard-to-reach engines.

• FITS MANY OIL FILTERS: This oil filter tool fits standard oil filters on many domestic and foreign light truck and passenger vehicles; Extremely helpful small oil filter wrench for cars, motorcycles, and lawnmowers
• IMPROVED GRIP: Our oil filter removal tool includes a magnetic base attachment that grips a wide range of oil filters as you work; Magnetic grip keeps the oil filter remover securely in place while you remove oil filters
• ADJUSTABLE FILTER REMOVER: This adjustable oil filter removal tool can fit popular oil filter diameters from approximately 2.4" to 3.6" (60 mm to 93 mm); Adjustable filter wrench includes a 3/8" to 1/2" drive adapter
• SPRING-LOADED JAWS: Our 3 legged oil filter wrench features spring-loaded jaws, offering a more secure grip than the average oil filter claw wrench; 3 prong oil filter wrench legs will reduce slippage
• CONVENIENT DESIGN: This oil filter remover tool is a lightweight wrench with a convenient compact design, making it easier to use in hard-to-reach engines; Magnets and jaws prevent you from dropping filters while working in tight spaces

Product features

OEMTOOLS 25101 Adjustable Magnetic 3-Jaw Oil Filter Wrench

The OEMTOOLS Adjustable Magnetic Oil Filter Wrench features three spring-loaded jaws for a secure grip while removing oil filters. This tool fits standard oil filters on passenger vehicles and light trucks with an oil filter diameter range from 2.4 inches to 3.6 inches. And our oil filter wrenches include a 3/8 inch to 1/2 inch drive adapter for use as a ratchet oil filter wrench with varying ratchet drives.

Fits Standard Filters

This oil filter removal tool adjusts to fit standard oil filters on many domestic and foreign passenger vehicles, as well as many light trucks.

Drive Adapter Included

Our adjustable oil filter wrench comes with a 3/8 inch to 1/2 inch drive adapter to use as a ratchet oil filter wrench with varying ratchet drives.

Spring-Loaded Jaws

This oil filter wrench features heavy-duty spring-loaded jaws, providing a more secure grip while reducing slippage as you work.

Compact Design

Our oil filter wrench has a lightweight and compact design that makes it easy to use in hard-to-reach engines.

Magnets for Improved Grip

This oil filter wrench includes a magnetic base attachment that is capable of gripping a wide range of oil filters.

These magnets keep the oil filter securely in place while you work and offer a more secure grip than the average oil filter wrench.

The magnets and jaws keep you from dropping filters as you work in tight spaces.

Product description

Tough, stainless steel band with permanently bonded textured coating for superior gripping power. Swivel handle makes it easy to turn in tight spots. Handle swivels more than 180 degrees with adjustable tension. Tension adjusting nut allows swivel pressure to be regulated. Patent pending coating process adds many additional gripping points to securely grab the filter. Specially designed tab keeps grip from sliding off the handle. Has a 2.875 to 3.25 (73 to 82.5 mm) range. Fits a common smaller filter size found on many domestic and foreign vehicles.

• Tough, stainless steel band with permanently bonded textured coating for superior gripping power
• Has a 2.875 to 3.25 (73 to 82.5 mm) range
• Fits a common smaller filter size found on many domestic and foreign vehicles
• Package dimension is 5.75 inches width by 10.5 inches height by 1.5 inches depth

User questions & answers

Question:	Will it fit acdelco pf48e
Answer:	I don’t know. I haven’t used this oil filter before.
Question:	Will this fit cadillac dts 2011 northstar
Answer:	Yes, it should fit the oil filter.
Question:	Will this wrench fit right on Corolla
Answer:	It should fit on most small filters.
Question:	Will this fit 2015 ninja
Answer:	I have this exact one and it's too big for my 2012 Ninja 1000.

Product features

Lisle 57020 Small Oil Filter Swivel Wrench

Tough, stainless steel band with permanently bonded textured coating for superior gripping power...won't slip. Swivel handle makes it easy to turn in tight spots. Handle swivels more than 180° with adjustable tension. Tension adjusting nut allows swivel pressure to be regulated...no more floppy filter wrenches. Coating process adds many additional gripping points to securely grab the filter. Specially designed tab keeps grip from sliding off the handle.

Product description

4 piece oil filter wrench set with stable, secure and permanent stand. Includes one each: 2538 - heavy duty swivel type oil filter wrench - 57-73mm, 2540 - heavy duty swivel type oil filter wrench - 65-83mm, 2545 - heavy duty swivel type oil filter wrench - 75-95mm, 2548 - heavy duty swivel type oil filter wrench - 92-111mm & 4325X50 - stand

• Includes one each: 2538 - heavy duty swivel type oil filter wrench - 57-73mm
• 2540 - heavy duty swivel type oil filter wrench - 65-83mm
• 2545 - heavy duty swivel type oil filter wrench - 75-95mm
• 2548 - heavy duty swivel type oil filter wrench - 92-111mm
• 4325X50 - stand

Product description

The Best Oil Filter Wrench for Your Toyota, Lexus, and Scion Vehicle.

This oil filter wrench offers the best fit, the best finish, and the best overall quality and will last the life of your vehicle. Don't be fooled by cheap imitations, get your professional quality Motivx Tools oil filter wrench today.



Why the Motivx Tools Oil Filter Wrench is Better

-We only use high quality 6061 T5 aluminum to construct our wrenches as opposed to lower cost, lower quality materials.

-Our wrenches are forged into shape under extreme pressure resulting in a very durable tool that will last the life of your vehicle. Most Toyota oil filter wrenches, while similar in appearance, are made of cast aluminum. Casting aluminum is much less expensive than forging but the result is a significantly weaker tool more prone to cracking and failure.

-Our wrenches are designed not only to engage the 64mm ring on the top of the oil filter housing, but the tabs below as well. This increases the contact area of the wrench on the housing decreasing the chances of stripping the plastic cap.

-Our Toyota oil filter wrenches are finished with a beautiful black anodized finish which isn't just for looks. It helps protect the aluminum from corrosion, makes clean-up after your oil change a breeze, and will never chip or peel like paint or other coatings.



Application Information

This oil filter wrench is a perfect fit on all 2.0L to 5.7L in Toyota, Lexus, and Scion vehicles that use Toyota oil filter 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t. It does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.

• Perfect Fit - This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. This wrench does not work on vehicles with traditional canister filters that you unscrew and throw away and does not fit the 1.8L engine oil filter cap.
• Built To Last - Toyota oil filter caps can be extremely tight causing tremendous pressure to be put on the wrench. That's why our Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum so they won't crack like cheaper cast aluminum or flex and damage the plastic cap like stamped steel versions.
• Excellent Finish - Our oil filter wrenches are not only built tough, but the surface is treated with a high quality black anodized finish to prevent corrosion and theyre laser engraved with the Motivx Tools logo.
• Professional Quality - Motivx Tools is a family owned and operated specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are made to our stringent specifications in Taiwan with a fit and finish you won't find anywhere else, and are backed by a 1 year warranty and excellent customer service.
• Purchase With Confidence - Buy our Motivx Tools oil filter wrench knowing it's a perfect fit, excellent quality, built to last, and most importantly we stand behind our products.

User questions & answers

Question:	Will this work on a 2017 Tacoma ? Vehicle match says it wont fit
Answer:	There have been some issues with the search function regarding specific trim levels, if your 2017 Tacoma has a 2.0-5.7L engine and uses a canister filter, then this is the wrench for you
Question:	Will this fit 2006 lexus is250 awd
Answer:	If your 2006 Lexus i250 has a 2.0 to 5.7Liter engine with a 64mm cartridge style oil filter system it will fit.
Question:	Will this fit 2017 4Runner
Answer:	Yes this will fit your 2017 4Runner. -Motivx Support
Question:	What is the size of the drive? (the square whole in the middle
Answer:	The square drive is 3/8" and the hex is 27mm / 1-1/16". -Motivx Support

• The set includes 1 piece 12 inch Universal Oil Filter Plier along with 1 piece Adjustable 3 Jaw 2 Way Oil Filter Wrench Removal Tool.
• The wrench are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service.
• The Oil Filter Plier (2-3/4'' to 4-1/2'') has a 12 inch long handle, which could offer you soft comfortable touch and nonslip control. Adjustable 2 position Oil Filter Wrench Pliers are a necessity for any automobile technician or mechanic.
• The 3-JAW 2-WAY Oil Filter Wrench could be adjusted to fit most oil filters from 24-51/64" to 43 -5/16"(63 to 110 mm) in diameter. You could use it with either a 3/8" or 1/2" ratchet handle with the included adapter, which could be snap into the tool like sockets do for socket wrenches, would hold together very well. The universal oil filter wrench is designed to remove the automobile oil filters.
• These two heavy duty tools would help you do the job easily and hassle free. Recommended for most common size car and engine oil filters.

User questions & answers

Question:	Is it only to loosen, or can it be used to tighten aswell
Answer:	An oil filter wrench is designed for removing a used filter. It should never be used to tighten a new filter because it can damage the filter or lead you to over tighten the filter.
Question:	Will this fit a Motorcraft FL-1995 oil filter
Answer:	I do not know. However I live on a farm and have two tractors and between the two tools that come with the purchase it has fit oil filters, hydraulic filters , and a twin system fuel filter.
Question:	Will this tool fit a 2008 nissan rogue oil filter
Answer:	I WOULD ASSUME IT WILL. I USED ON A 3500 CHEVY EXPRESS CUBE VAN

Product features

GEARDRIVE 2Pcs 12 Inch Adjustable Oil Filter Pliers with Universal 3-Jaw 2-Way Oil Filter Wrench Tool

Specification:

• GEARDRIVE oil filter pliers feature a jaw-type design that helps provide the torque to ease the removal of stubborn, on-tight oil filters. Tool is forged for superior strength and the plastisol-coated handles provide a firm grip. Allows you to operate in tight spaces and accommodates most common size auto and small engine filters
• Three jaws made from heat-treated carbon steel, grasp filters tightly. Use it with either a 3/8" or 1/2" ratchet handle with the included adapter. The compact, low profile design allows this filter wrench to grip better in tight areas.

Quick Adjustment

Strong and reliable, the two-position slip joint design quickly and easily adjusts to size, fitting filters up to 4-1/2 inches in diameter, assisting the mechanic with a wide range of filter removing jobs on various models of vehicles.

Special Design

3 jaw anti-drop design, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied.

Universal Application

The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a oil filter to make your work easy.

• Adapter allows use with 1/2" square drive wrenches
• Designed to grip like socket reducing the possibility of crushing filter
• 23pcs Aluminum Alloy Cup Type Oil Filter Cap Wrench Socket
• with a storage case

User questions & answers

Question:	Would this work on a 2010 Prius
Answer:	It should be able too...
Question:	Would this work on a mercedes benz c300 4matic
Answer:	you need the inflator
Question:	Would this work for Mecedes E
Answer:	Cartridges are made of steel with a zinc plating.
Question:	Would this fit a mitsubishi montero sport xls
Answer:	Each cartridge 2-3oz
Question:	will this fit my small lawnmower filter
Answer:	Yes, it fits, but the new shape of the end fitting makes the Ukeg 128 oz. pressurizing system leak, and overpressurizes the system. I ordered CO2 cylinders directly from GrowlerWerks and they work.
Question:	I need these to fit in a tight space so I need to know the overall length. Thanks
Answer:	Although a 15-count package is also available, this is a 40-count package of CO2 cartridges.

Product features

Internal Bite Tooth

Multi Stiffener

Ratchet Wrench

Non-slip holder, get off the oil filter with ease!

• Function: This oil filter wrench is designed to help you remover the toughest filters on your vehicle.This wrench has three jaws design and it will make you work much more easier.
• Special Design: This oil filter wrench has new designed with three jaws.It will gives much more catching strength to the filters and make the remove easier.
• Fitment: The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles.
• High Quality: The oil filter wrench is made of 45# carbon steel which has a higher strength than normal materials.It is totally rust and corrosion resistant and waterproof.Gives it a long time performance.
• Warranty:1-Year / 365-Days Unlimited Mileage Warranty.Your Purchase is Backed by our Rock-solid Satisfaction Guarantee.

User questions & answers

Question:	Anybody use this on the newer Ram trucks with the 5.7L it’s a pain to get to above the crossmember
Answer:	I don't know about the Dodge Ram, but this does work in tight places, and hard to get to places.
Question:	where is it made? which country? thanks
Answer:	I'm not sure where but it's the same one as blue point that they sell on the snap on truck.
Question:	Can this wrench be used to tighten up the oil filters as well
Answer:	Yes you can, especially when some Cummins filters are hard to reach. Be careful not to over tighten, you can damage the new filter.
Question:	Is this from China
Answer:	No identifiers anywhere on product. It is excellent quality and performs flawlessly

Product features

Perfect Fit

The oil filter wrench can remove the oil filter from 2-1/2 inch to 4.5 inch, fit 1/2 & 3/8 inch square driver ratchet or 7/8 inch wrench which can remove various models of vehicles.

Features

Special gear design, which can more firmly seize the oil filter .

Use this Oil Filter Wrench with a square drive tool and make changing your filters a breeze .

Three-claw design

More triangular stability principle, wrench three-jaw design, high hardness and high torque, three screws at the bottom fixed, good fixability, strong torque, not easy to fall off, more durable.

Thickened plate

Two upper and lower thickening plate, firmly holding the gears, long and durable.

Easy to use

This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning it then with a ratchet loose it up.

Product description

23pcs Aluminum Alloy Cup Type Oil Filter Cap Wrench Socket Removal Tool Set 1/2"dr. with Carrying Case

• 🚗 Features- Changing your oil and oil filter just became a whole lot easier with this new oil filter cup set; The set offer a wide array of size to fit a variety of vehicles & the low-profile socket cap set allows to reach into the oil filter housing to easily remove an oil filter; Oil filter cap set is designed to grip like a socket to reduce the possibility of crushing the filter, while the socket wrench and ring spanner help remove jammed filters and caps.
• 🚗 Premium Material Smart Design - This Oil Filter Wrenches Socket Set is made of quality robust stainless steel and aluminum alloy material, high strength and hardness, anti rust and oxidation, heavy duty and not easy to deform or break; accurate cup-type design makes it grip like a socket that can minimize the possibility of crushing filters.
• 🚗 Comprehensive Tool Accessories - This Oil Filter Wrenches Socket Set is a professional comprehensive tool set that has totally 23pcs tool accessories which includes 21 x Oil Filter Cups/1 x 1/2in Drive Ratchet /1 x Wrench with 1 x Pair of Gloves for preventing slip and getting hurt, complete accessories for dealing with any complicated problems you may meet in the repairing or installing work.
• 🚗 with Compact Case - All the tool accessories of this Oil Filter Loosen Tighten Cup Cap Socket Garage Tool are well stored and sorted in a compact case, the specifications of cups have been clearly marked for easy identify and use; easy store and convenient to carry, no need worry tool accessories messing around and missing anymore with this case.
• 🚗 Oil Filter Cup Sizes-901-Dia:65mm;Tooth:14/902-Dia:67mm;Tooth:14/903-Dia:74mm;Tooth:14/903-1-Dia:75mm;Tooth:15/903-2-Dia:74mm;Tooth:8/903-3-Dia:74mm;Tooth:15/903-4-Dia:73mm;Tooth:14/903-6-Dia:75mm;Tooth:12/918-Dia:74mm;Tooth:15/904-Dia:79mm;Tooth:15/905-Dia:73mm;Tooth:15/905-1-Dia:74mm;Tooth:14/906-Dia:84mm;Tooth:18/907-Dia:89mm;Tooth:15/908-Dia:91mm;Tooth:15/909-Dia:92mm;Tooth:15/910-Dia:95mm;Tooth:15/911-Dia:76mm;Tooth:12/911-1-Dia:79mm;Tooth:15/914-Dia:101mm;Tooth:15/915-Dia:92mm;Tooth:15.