11 best inverter 1500ws
A 1500W inverter is a piece of electrical equipment commonly used in the automotive industry and other applications where portable power is needed. Here's what you should know about a 1500W inverter:
Purpose: A 1500W inverter is designed to convert direct current (DC) power, typically from a 12V or 24V battery, into alternating current (AC) power at a voltage of 120V or 220V, depending on the region. This conversion allows you to power household appliances and electronic devices that require standard AC power when you are on the go, such as in a car, RV, boat, or during outdoor activities.
Power Rating: The "1500W" designation indicates the inverter's maximum power output capacity. It can deliver up to 1500 watts of continuous power, and often has a surge rating that allows for temporary overloads beyond this capacity for a short period, typically a few seconds.
Types: Inverters come in two main types: modified sine wave and pure sine wave. A 1500W inverter can be available in both variants. Pure sine wave inverters produce a cleaner and more stable AC waveform, suitable for sensitive electronic devices like laptops and medical equipment, while modified sine wave inverters are less expensive but may not be suitable for all devices.
Applications: A 1500W inverter can power a wide range of devices, including laptops, smartphones, kitchen appliances like microwaves and blenders, power tools, TVs, and more. It's often used by travelers, campers, truck drivers, and outdoor enthusiasts who need to run AC-powered devices away from traditional electrical outlets.
Safety Features: Many inverters come equipped with safety features such as overload protection, over-temperature shutdown, and low-voltage alarms to protect both the inverter and the connected devices.
Installation: Installing a 1500W inverter typically involves connecting it to a DC power source, such as a car battery, via cables with clamps or ring terminals. It may also include outlets or USB ports for plugging in various devices.
Size and Portability: These inverters vary in size and design, with some models being compact and easily portable, while others may be larger and suitable for more permanent installations.
Brand Variations: Various manufacturers produce 1500W inverters, so product features and build quality can vary. It's essential to research and choose a reputable brand known for reliability.
In summary, a 1500W inverter is a versatile piece of equipment that converts DC power from a battery into usable AC power, making it a valuable tool for powering various devices while on the move or in locations without traditional electrical outlets.The choice between modified sine wave and pure sine wave depends on the specific devices you plan to power.
Below you can find our editor's choice of the best inverter 1500ws on the market
Audiotek 1500W Watt Power Inverter DC 12V AC 110V Car Converter USB Port Charger
AUDIOTEK
Product description
Audiotek Advantage:
America's #1 power inverter brand. Provides 600W continuous DC to AC power and 1500 watts of peak power Dual 110V household electrical outlets provide enough power for your laptop, digital camera, TV, fan , game console, DVD/Blu-Ray player, GPS, lamps, and more 5V/2.1A USB charging ports make this power inverter ideal for charging your phones, tablets, and other USB-powered devices Built-in replaceable 40A*2 fuses and cooling fan for safety and easier maintenance. This power inverter has over voltage, overload, over-current, under-voltage, overheating, short circuit protection Comes with car cigarette lighter plug and and a black/red battery clips to plug into your cigarette lighter or connect directly to your vehicle's battery
Audiotek Power Inverter Brand
The highest average review rating of any power inverter brand. Audiotek is devoted to providing portable power inverters of the highest quality and performance for powering up multiple loads and major household appliances on the go. Providing the best quality products with professional customer service.
Optimal Use / Precautions:
Converts DC power in your 12V batteries in your car, truck, boat or any other DC power sources into the AC power that home appliances, electronics and tools need. Always tighten the Positive (+) and Negative (-) terminals when the inverter is in use otherwise a loose connection can overheat due to poor contact. Always make sure that the total rated power of the connected devices is less than 600W. Avoid placing the inverter in a location that receives prolonged direct sunlight or near to heat sensitive materials as the inverter can become warm during use. If the rated input of any connected AC devices exceed 150W use the included battery clamps to directly connect to your vehicle's battery as most vehicles 12V ports are rated and fused for 150W.
- Rated Power: 600W, Maximum Power: 1200W, Peak Power: 1500W
- Input Voltage: DC 12V, Output Voltage: AC 110-120V
- USB Output Power: DC 5V 4.2A (5.2A Max). One 2.1A automatic 0~2.1A port.
- Built-in replaceable 40A*2 fuses and cooling fan for a safer and easier to maintain inverter.
- Product Dimension: 8.75 x 4.5 x 2.5 inches (LxWxH)
User questions & answers
| Question: | Would a 1200W electric paint sprayer work with this |
| Answer: | Should be OK - I have an 1100W electric paint sprayer and hook it up to a single car battery (12 VDC at about 700 amps - while the car battery is still in the truck and connected - and the engine not running) and no problem whatsoever - I also have a solar battery pack of six 12 VDC car batteries hooked up in parallel for extended use of my electric paint sprayer - hope this helps - cheers |
| Question: | Where is the usb port located? it's not shown in the pictures |
| Answer: | it is on the side opposite the orange fuses you see in picture. there is only one. |
| Question: | Would i be able to run a 8.5 amp corded impact wrench |
| Answer: | I can run an 1100 watt micro wave with it. I think the formula is p equals amps times volts. 8.5 times 110 so in theory it should work. |
| Question: | Can i plug a dry vac thats 1200 watts in this |
| Answer: | Not sure bur it does say 1500 watt peak power. If was me I'd go to the next size larger |
GoWISE Power 1500W Pure Sine Wave Power Inverter 12V DC to 120 V AC with 3 AC Outlets, 1 5V USB Port, 2 Battery Cables, and Remote Switch (3000W Peak) PS1005 (Brand Name/Packaging May Vary)
GoWISE Power
Product description
Go WISE power inverter is an advanced tool of power conversion. It can supply you with AC power converted from a DC power source. It can be used in cars, vessels, during camping and in power failure emergencies. Pure Sine inverters are a stable power source with 1500W continuous power and 3000W surge power with low harmonic distortion. This inverter is an excellent tool to use during power failure emergencies and guarantees maximum efficiency with computers, sensitive equipment and more. Compact and portable, this inverter can be used on worksites, boats, cars, camping or for permanent use. The PS1003 features 5 kinds of protection systems: Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm. Inverter also comes with an LED light that indicates the problem. Your purchase comes with black and red cables with ring terminals, a remote switch, an inverter with 3 AC sockets and 1 USB port 5V, and a detailed instruction manual.
- PURE SINE Power Inverter 1500W Continuous/3000W Surge, 12V DC to 120V AC w/ Black and Red Cables w/ Ring Terminals, Remote Switch, 5 kinds of Protection Systems and 4 Output Sockets
- Ideal use in cars, vessels, and for power failure emergencies and guarantees maximum efficiency with computers, sensitive equipment, and more.Resettable Circuit Breaker
- 5 Protection systems: Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm
- Total Harmonic Distortion (THD) <3%; Soft start low interference tech and temperature control cooling fan. Output Voltage: AC 120V; Frequency: 60Hz
- Note: Brand Name/Packaging May Vary
User questions & answers
| Question: | How do I extend the remote cable |
| Answer: | It’s the same as an RJ11 telephone cord. Just make sure the cord has four wires in it some only have two. |
| Question: | How do I hook up my solar panel to the inverter |
| Answer: | I’m with the person that said get professional help. Here’s why, I have a second home in Baja powered exclusively on solar. I have a 10,000 w inverter but I like a smaller like this for smaller items and less noise. I had some work done in the roof where they had to reposition all my solar equipment. My roofers didn’t connect it right even though they claimed they work a lot with solar, since that’s all there is where I’m at. To make a long story short, the mistake caused the controller to brake down, having to buy another one, nearly took down my bran new batteries that I’ve spent $1,200 on, I still had to pay the service of a professional, water pump wouldn’t work since nothing was working thus no shower, no toilet. Ended up costing me more than the original cost had I hired a professional to do it. Learned lesson the hard way. |
| Question: | instructions say ps1005 takes 40Ax6 car fuses..where do I put these fuses? Also, what's best disconnect fuse to install between inverter & battery |
| Answer: | This is going to be long winded but hang with me I will get to your fuse issue and a lot more that I have learned that will save you time and money. You will have two wires coming from your battery or battery bank. a positive and a negative. When running power from your battery bank the biggest enemy is power lose. The industry recommended voltage drop between the inverter and battery(ies) is no more than 0.075 volts, the the less the voltage drop the better. No use in losing all that hard earned solar energy to wiring transfer loss. To obtain this low of a voltage drop you will have to use some fairly large wire / cables, these are available at your local auto parts store, they will have everything from eight gauge or smaller to zero maybe even double zero gauge (in wiring as the number gets smaller the wire gets bigger, kind of backwards) you want battery cable, I made the mistake of going to Lowe's and buying wire but the cover was not right for the job. I'll give a voltage drop guide for inverter size, wire size and length a bit later. In my situation I had to go almost three and a half feet to hook my batteries to my inverter. I'm using two 12V group 27 deep cycle wet batteries in parallel that have to be outside, thus the longer run. I'm attaching a link to an article with four different DIY methods for installing an inverter, mainly because it contains a the table for inverter and wire size voltage drop per foot of wire. This will allow you to calculate voltage drop for your 1500/3000, (use the 1500 numbers) by dividing the voltage drop per foot into 0.075 to find the number of feet you can use for each gauge of wire and stay under 0.075. the link is http://www.doityourselfrv.com/rv-inverter-install-diy/. Once you have the right size wire to run from your batteries to your inverters the fuse holder and fuses I'm recommending will make sense. I went with a E2 by Scoshe EWFH Single ANL Fuse Holder available on Amazon for $6.95 (https://www.amazon.com/gp/product/B000KIR8M0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1), which is quite reasonable priced, I researched them and users have been happy with them. It doesn't use car fuses it uses a very high quality fuse that comes in values from 100, 200, 250, 300. I went with the Scosche 250 amp ANL Fuse - 1 Pack that is $6.61 (https://www.amazon.com/gp/product/B0023NVZ8I/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1) , but I also bought the 200 amp and the 300 amp along with spares of each and a spare fuse holder. Now it's helpful hint time, the wire ends to attach these wires to the battery and the inverter are different. The battery requires a wire end for the gauge wire you use with a 3/8" circular opening (stud) on the end, I used "Pico 4439C 1/0 AWG Battery Cable 3/8" Tubular Lug Ring / Eye Terminals 15 Per Package" (you may not need 15 so look around for the gauge and stug size in the quantity that fits your needs), my advice is to get the wire ends a size larger or gauge smaller, this will make since in a bit, also I bought some four gauge wire ends that just weren't big enough for four gauge wire. The inverter also needs a wire end that fits your cable / wire size (which will be the same) but it has to have a 1/2" circular opening (stud), I used these "Install Bay Copper Ring Terminal 2/0 Gauge 1/2 Inch 5 Pack - CUR2012". Last point I promise, if you don't own an industrial crimper, these Ring Terminals are big and need a hammer crimper, I did it different and many other also do this. First buy some shrink protective covering and put on the wire, when you finish putting the end on you can slide it down to the very end and heat it with a heat gun or a torch and it will shrink and form fit over you wire end and wire so there is no exposed metal, except for the very end with the circle. To get the end of the wire on the wire place the wire end in some vice grips or a vice and cut small pieces of solder until it is full and heat it with a heat gun or a torch (I use the one they sell at the hardware store that has a blue butane bottle and a screw on torch end, works great). With the wire end filled with as much cut solder as it will hold heat the wire end with the torch (only the wire end no wire / cable yet, once all the solder has melted look and see if the cup of the wire end is full, the first pass might only melt and fill the end, fear not. After looking and if there is enough solder heat it a bit more for while looking it started cooling already. If not enough solder let it cool and do the same thing cut solder and fill with as much as it will hold and heat again until all the solder in the wire end melts and you can see the molten solder level up fairly high to the edge of the cup, then just stick the wire end that has been trimmed to the right length and twisted nice and tight in and hold in place for a minute or so. It isn't coming out unless reheated, with this method no crimping is needed and you can't pull the ends off, period. So make sure you have the end oriented the direction you want it, the heavier gauge wire doesn't bend and twist easily. So layout your wire and get a feel for what direction you want the end facing to go on the inverter or battery. Note this solder method won't work if the selected wire end has an inspection port of is open at one end, but those might be easier to crimp, but if possible I would go with solder method. By the by I used a silver tin solder mixture that came on a 30 foot roll for around $16.00, but I had a lot of ends to solder. Once the wire end has cool a bit slide down your shrink wrap and heat so that it conforms all around the end leaving only the ring for attachment. It will be a good looking rock solid cable. I know you asked about fuses and the holder and the fuses I recommended are perfect for the job, you only need the fuse holder on the positive wire / cable if you go to the page on Amazon there are around 40 Q&A's and several reviews for the holder and fuses. Sorry if I got a bit carried away with information but I just did this project and learned a bit. If the auto store only has one color of wire, like mine did in black, I bought some red electrical tape and put strips all up and down the positive cable. Good Luck. |
| Question: | Does the remote switch shut off the inverter so it disconnects it from the batteries |
| Answer: | The remote control is extremely convenient and it will shut the unit completely down there will be no draw whatsoever from your bank using the remote control,,, and again the remote is so convenient mounted up high so you never have to bend over to turn it on and off and this allows you to mount the inverter down toward your battery bank for less losses,,i used flexible welding cable for mine and installed lugs with Harbor Freight Tools hydraulic crimper,,, been using this unit for about two years now I don’t use it every single day however I run my refrigerator on it two or three times a week weather permitting. I have 4/6 V golf cart batteries wired up for 12 V and I’m using 500 W of Renorgy solar panels 12 V panel’s going into a Renorgy mppt c/c (one of the old 4210 c/c Extremely reliable) One thing you really need to consider when buying this is that you won’t have a lot of surge capability for start up if you’re trying to run a microwave with this it’s probably not going to happen unless it’s an extremely small microwave I vacuum my floors with this couple times a week I can run my refrigerator and a few other things (not at the same time)however if you’re trying to run a lot of big ticket items or a microwave You may want to consider going three or 4000 W continuous |
Product features
GoWISE Power offers a reliable power source at an economical cost!
When compared to modified sine wave inverters, pure sine wave inverters are the preferred choice. They provide a better and cleaner current of back-up power with low harmonic distortion, which are important for powering sensitive electronic equipment, such as printers, laptops, medical equipment and many more.
Outlets and Ports!
This inverter is built with output sockets and USB port (5V & 1A).
Cooling Fans and Power Terminals
Equipped with negative and positive terminal power ports as well as cooling fans to keep the inverter from overheating.
Accessories
This inverter comes with a power switch equipped with a 15-foot wire to install in a convenient place and a pack of 8 gauge starter cables capable of powering up to 1000 watts.
About Us
GoWISE Power offers a line of innovative power sources and connections. Our Pure sine wave Power Inverters are a source of mobile energy that you can count on in a variety of situations. Use one while working on site, camping, traveling, power failure emergencies, and more!
Energizer 1500 Watts Power Inverter 12V to 110V, Modified Sine Wave Car Inverter, DC to AC Converter with Dual 110 Volts AC Outlets and 2 USB Ports 2.4A ea - METLab Approved Under UL Std 458
- ENERGIZER POWER INVERTER - 1500 watts continuous power, 3000 watts peak power. Modified Sine Wave Car Inverter converts 12V DC to 120V AC Power
- PERFECT FOR AN EMERGENCY, HURRICANE, STORM OR OUTAGE - Features 2 USB ports 2.4A each, 2 standard north american AC outlets **Free 3FT 2AWG Battery Cables Included**
- THE BRAND NAME YOU CAN TRUST - This inverter has all the protections that you will need. Overload, over voltage, under voltage, high temperature and short circuit. All of this is displayed on the LCD screen as well as input voltage, output wattage and battery level
- ENGINEERED TO PERFORM - Our Energizer power inverter connects directly to a 12 Volt DC battery to power televisions, fans, small microwaves, small power tools, refrigerators and much more
- 2 YEARS WARRANTY - We believe in our product and quality, that's why we offer the warranty that proves it. This power inverter this item has been tested, validated and approved by MET under UL std 458 and CSA for both its safety and performance.
User questions & answers
| Question: | How much power does this use while idle |
| Answer: | It should; it powers our Medela Pump-in-Style ( input 110-120v, output 9v) |
| Question: | I want to use this to plus in a portable speaker in my car that would run my iPod via aux cord....will this work and not have interference? 6watt draw |
| Answer: | Yes it will run a 30w fan |
| Question: | Will this auto shutoff when the battery gets low to prevent a dead car battery |
| Answer: | Apparently not. I find no way to do so. The power draw for this display in minuscule. The book states... “ LCD Dispaly While inverter is working,the LCD display will show Battery Status Level,Pure Sine Wave Symbol,Input Voltage,Output Voltage ,current etc. Once the inverter is on protection mode,the following codes will shown: 1.LO: Low voltage protection 2. HI: High voltage protection 3. OL: Overload or short-circuit protection 4. OH: overheat protection.“ |
| Question: | Will this power a breast pump? the input power for the pump is 100-240 v, 0.3 a. the output is 9v, 1.1 a |
| Answer: | The VOLTWORKS 1500W pure sine wave inverter THD is less than 3%, almost as same as utility power. |
NDDI 1500W Car Power Inverter 12V DC to 110V AC Car Converter Charger Adapter with Dual 3.1A USB Port and AC Outlets Quick Charging
- 【NDDI Feature】: NDDI power inverter provides 2AC continuous 1500 watts current outlet (3000Watts peak power), 2 Smart USB 3.1A ports, designed a switch to improve usability and convenience.
- 【Safe & Convenient】: Made of ABS fire resistance material, Car inverter has 4 Replaceable fuses allows you to easily deal with the problem of replacing the fuse. Safe charging technology provides protection against overheating, under/over voltage charging,overload and short circuiting.
- 【Widely Use】: Car converter will solve your charging problems on the road, running equipment for travel. An excellent choice for a long car journey, camping, emergency, and offices, etc. electronic devices charging, such as laptop, cell phone, digital camera, shaver, hairdry, etc.
- 【Inverter Size】: Automotive Inverter (L x W x H): 9.8 x 6.5 x 3.1 in, weight: 4.52 lbs. 2 built-in smart silent cooling fans minimizes noise, increases service life and extends usage time.
- 【More You Get】: 1x 1500W Power Inverter, 2 pieces 23 inches O-ring connector cord, 1x user manual, 4x 40A fuses, and we provide 24H/7D customer services. Our goal is to supply the best professional power solutions for you !
User questions & answers
| Question: | Will the 1500v be strong enough to power a 12 amp compressor i carry on my box truck? if my calculations are correct, 120v x 12 amps = 1440v |
| Answer: | My item was watered down and never dried. |
| Question: | Can this be used for semi truck |
| Answer: | Yes but if you YouTube how to blow up a raft you can do it with a blow dryer and water bottle. Worked like a dream |
| Question: | Usb ports work but the ac outlets do not work, also, fault light is on |
| Answer: | Yes it does and we love them!! :) |
| Question: | I want to use this to power a 8 amp drill, will it work or damage the inverter |
| Answer: | Yes, I think maybe 2 on each float |
Novopal Power Inverter Pure Sine Wave-1500 Watt 12V DC to 110V/120V AC Converter- 4 AC Outlets Car Inverter with One USB Port-16.4Ft Remote Control and Two Cooling Fans-Peak Power 3000 Watt
/Packaging May Vary)
