13 best wheel chock with mounts

Product description

This Trailer Adaptor Kit is designed to work with our Pit Stop/Trailer Stop chock, (part # PS-1500). Simply mount the low profile kit to the floor of your trailer, and the Pit-Stop/Trailer-Stop wheel chock (PS 1500) is ready to be attached in seconds with eye bolts and only one thumb screw. Many customers get an extra one to easily change the placement of their motorcycle in their trailer.

• The CONDOR Trailer Adapter Kit works on all forms of transport platforms, such as enclosed trailers and open flatbeds
• Simply mount the low-profile kit to the floor of your trailer, and the Pit Stop / Trailer Stop (PS-1500; sold separately) is ready to be attached in seconds by using only one thumb screw
• Includes mounting hardware

User questions & answers

Question:	How is the TK-3000 used
Answer:	It is 2 1/4" to 2 1/2"
Question:	What is the spacing between mounting holes used for attaching to trailer
Answer:	No, this is for PS-1500, you will need SC-3000 for the Trailer only chock
Question:	Will this work with condor sc-2000 trailer-only chock
Answer:	I put it on my utility trailer and used lag bolts to bolt it in place. I have never had any problems with it.
Question:	Will i have any issues with the xr650l stock tires in this
Answer:	We didn't use this walker with 4 wheels. However, we moved to a Cardinal Health Rollator which has 4 wheels and my husband loves it.

Product description

This Maxxtow wheel chock automatically locks the front wheel into place when rolled into chock. Safely secures motorcycle wheel for transport or storage. Mounts securely to truck bed, trailer or floor. Enables one person to easily load and strap down motorcycle. Fits most standard motorcycles. Material Type: Tubular Steel and Steel Plate. Sturdy one piece upper frame design for stability.

• 3-position adjustable holes on wheel base to accomodate various motorcycle wheels
• Includes hardware and mounts securely to floor, truck or trailer
• Locks your tire as you roll it into your wheel chock; Easy for one person to strap-down a motorcycle
• Heavy duty steel construction; Durable powder coat finish to resist rust and corrosion
• Overall Dimensions: 24" L x 9-3/4" W x 12-7/8" H; Base Dimensions: 15-5/8" L x 10-5/8" W

User questions & answers

Question:	What is the height of the tallest point, I need to clear the fender
Answer:	12" is the tallest
Question:	hayabusa
Answer:	Yes, better than I expected
Question:	how wide is this chock, trying to determine if I can mount to my hitch mount rack
Answer:	Overall, the plate is 15 1/2 long X 10 3/4 wide. The mounting bolt locations are 7" wide X 6" long center of hole to center of hole. Product works very well mounted in the bed of my trailer.
Question:	Will this work on a suzuki c50 boulevard
Answer:	As I cannot be specific about the Suzuki Boulevard, it works very well for a 2011 Harley Road Kong and 2014 Street Glide. They have different size front tires, so this proves the adaptability of the wheel chock. Easy to install well constructed. Just completed a 2400 mile trip to Tennessee and was very pleased.

Product features

MaxxHaul 70075 Motorcycle Wheel Chock

Our MaxxHaul Motorcycle Wheel Chock is designed to easily transport, repair or store your motorcycle with safety and stability. Its steel construction provides maximum strength to hold your motorcycle. It comes with mounting hardware which can be easily done on your truck, trailer or shop.

Adjustable Design

This wheel chock features 3 different position brackets to accommodate different motorcycle tire sizes.

Automatic Lock

Its pivoting cradle allows you to easily load and unload your bike into the wheel chock using the weight of the bike.

Easy Installation

It includes hardware that allows you to mount it on your truck bed, trailer, shop or any flat surface with ease.

Powder Coat Finish

Powder coat finish to resist rust and corrosion.

Proven and Tested!

See it and try it for yourself as we guarantee customer satisfaction on our MaxxHaul products. Feel free to give us your honest review as we strive to achieve the best quality and pricing in all our products. Always use straps or tie downs to secure bike when transporting.

Product description

The CONDOR SC-2000 Trailer-Only Chock is our all-steel version of our Pit-Stop. It has all the same capabilities except it is designed for trailer use only. Our patented adjustable cradle fits all bikes from dirt bikes and sport bikes, to cruisers and heavy touring bikes, and anything in between, up to 3,000 pounds. It will work on front and rear tires from 14" to 22" and 80mm to 230mm. The patented locking mechanism safely and securely supports your motorcycle in an upright position on all transportation platforms. Our chock will hold your motorcycle so securely, only one person is needed to load and unload any bike, and only two tie-down straps are usually required. And you won't damage your sensitive suspension parts because you never need to over-tighten your tie-down straps.

• Fully adjustable wheel locking system capable of accommodating either front or rear wheels in sizes from14-22in/80-220W and bikes weighing up to 3000 pounds
• Patented locking mechanism securely supports motorcycles in an upright position
• As a trailer chock it easily snaps on and off transport platforms
• Requires only one person to load or release any motorcycle and 2 tie-down straps to secure bike for transport
• Fold down for easy storage

User questions & answers

Question:	Is this made in the USA still
Answer:	I went to their internet site and it stated that it IS made in USA
Question:	I have a toyhauler, is this easily removed and reinstalled so I can have a flat garage floor
Answer:	Yes and over all this is a very stable unit. If you want it mounted in a trailer with wood floor, it has the bolts to mount it after drilling and if they are the right length. If you mount it in your garage with a concrete floor then you would be using concrete anchors. These vary from a jam in type stud to a concrete lag bolt. The concrete lag can be removed but, if removed many times it may become loose and new holes may need to be drilled. The jam anchor with nut on top will stick out some but, should not bother anything when left in when removing the stand bracket. I have mine mounted in a trailer with wood floor and is amazing.
Question:	Does the wheel chock come with all of the hard ware to mount it in the trailer or do you have to buy the mounting plate and bolting separately
Answer:	Everything you need to mount the Condor wheel chock comes with the unit. It is easy to install, and over the last year of use has preformed flawlessly. I am very well pleased with the unit.
Question:	Does this have to be mounted to any of my enclosed trailer's frame cross members or just to the 3/4" wood floor
Answer:	Well, I guess it would depend on the strength of the 3/4" floor and closeness of cross beam supports and attachment. I used two bolts through the steel crossbeam, added an additional 3/4" piece under my 3/4" plywood floor and used the remaining bolts through the resulting 1 1/2" floor. It is very sturdy inside my enclosed trailer with rear ramp door.

Product description

The Lock 'N Load BK500 Dirt Bike Wheel Chock is a complete transportation system for all Dirt & Endure Motorcycles (100cc+). This all-in-one systems allows quick and easy loading and unloading while providing the strength and security during transportation. Using our unique front tire tie-down, you can get the security and tightness without over compressing the suspension. Simply push your dirt bike into our auto-locking wheel chock, secure front tire tie-down, and you're on the road in less than 60 seconds.

• BK500 includes: Wheel Chock, Quick-Release Mounting Plate, Front Tire Strap, and Hardware
• 2-Step Loading Procedure: Ride the Bike into the Chock to Auto-Lock Front Tire Securely in Place, Loop Front Strap Over Tire to Anchored Plate and Ratchet Tight.
• Our Quick-Release Mounting Plate allows easy removal of the wheel chock. 1/4" Steel Plate will Withstand Year-Round Environments and Constant Abuse.
• Use with the BK102 Bike Stand to quickly convert from transport to staging stand. The BK500 creates a secure stand with no straps, great for changing oil and staging.
• Can be used with all Lock 'N Load products and accessories: Such as the BK101 Narrow Adapters for Mountain Bikes.

User questions & answers

Question:	How long are the carriage bolts they provide
Answer:	I would say NO. I have 2 of the BK500 units for 250cc dirt bikes that weigh about 240 lbs. each. The 500s are just strong enough in my opinion. A larger size bike like a Harley would need the heavier duty BK1000 units. You should also buy the quick release wing nuts if you wants to take the chalks off when not hauling the bike.
Question:	Will these work/strong enough for a Harley with a 21 inch wheel
Answer:	Yes it will
Question:	Would this wheel chock work with the base plate from the BK1000 model
Answer:	yes
Question:	Could this be mounted on a truck bed and used for transporting dirt bikes
Answer:	This allows you to put the wheel chock into your trailer with one thumb screw, and to easily remove it to provide room in your trailer when not being used to transport you Motorcycle. Allow chock to be installed/removed in less than 1 minute.

Product description

If you’re looking for a powerful way to keep your bike strapped to your trailer while transporting, you’ve come to the right place.

Pit Posse’s wheel chock is designed to hold your bike’s front wheel down to withstand any ride or travel.

✔️ Will keep the front wheel of any motorcycle up to 6 1/2 inches wide

✔️ Mounting points allow the chock to easily be removed when the truck bed or trailer is needed for other loads

✔️ Mounting hardware included

✔️ Made from 7/8" steel tubing and chrome-plated

✔️ 5 year manufactures warranty

✔️ Additional hardware kits available so a single chock can be used on multiple locations

ADD TO CART TODAY AND ENJOY A FULLY CUSTOMIZABLE WHEEL CHOCK

• ✅ Made from 7/8" steel tubing and chrome-plated
• ✅ Will keep the front wheel of any motorcycle up to 6 1/2 inches wide
• ✅ Mounting points allow the chock to easily be removed when the truck bed or trailer is needed for other loads
• ✅ Mounting hardware included
• ✅ 5 year manufactures warranty

• LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike; Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock); Ideal for one-person motorcycle loading
• EASY TO USE: Designed with one-person loading in mind; Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included); Takes only minutes to install and seconds to load and unload
• MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate; Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed; 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length
• BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware, thermoplastic end caps for added strength; Makes loading and transportation safe and simple for just one person; Mount securely and motorcycle front wheel stand will stay locked in when empty
• PACKAGE CONTENTS: Motorcycle trailer accessories package includes removable motorcycle wheel chock for trailer and bolts, flat washers, lock washers, nuts, and spacers for mounting on a stationary location

User questions & answers

Question:	Will this properly hold a fat tire mountain bike
Answer:	They are held down with 4 lag bolts,spacers,nuts and washers. They can be removed,but not that fast. Then can be bolted back down when you need it again.
Question:	Removable Mounting
Answer:	Yes. The rear piece of the chock is adjustable, as it folds up to hold the tire securely in place. The nose of the chock is designed to fit various tire sizes. I have had mine for two years and have hauled everything from a sportster to a dyna to brand new streetglides with no problem. Word of advice - this unit ships with mild steel hardware. Mine rusted out in 6 months. I replaced everything with stainless, and have had zero problems.
Question:	does this fit 21 in tires
Answer:	It works on my 97 fat boy and 2007 ultra glide for sure have no clearance issues with finder or break parts. I will add do not cheep out on tiedown straps. if it was not for the wheel chock my fat boy would have feel over onto its side. I had to keep tightening up the straps every couple miles to get back home.
Question:	I have '16 Street Glide, stock tires. Will this touch the brake disc
Answer:	Bolts were 2 5/8 inches long full thread

Product features

Picture This...

About the ABN Motorcycle Wheel Chock

Stop worrying about your bike tipping when storing, transporting, or servicing. The ABN | Motorcycle Wheel Chock Removable Wheel Chock for Motorcycles is your sleek and stable solution.

A Closer Look

Simply drive your bike into the locking wheel chock to lock the front wheel in place. It takes minimum surface area on your floor, truck, or trailer mounting surface while providing maximum stability for your bike.

FITS YOUR WHEEL

This motorcycle chock is perfect for standard front tires (super-wide front tires or custom low-profile front fenders may not fit).

PERMANENT OR REMOVABLE

Even if you live in an apartment or for any reason cannot bolt this motorcycle tire stand to a surface, you can still use carriage bolts to mount it onto a 4-foot by 8-foot sheet of 3/4-inch plywood. So, it can be as permanent or temporary as you wish.

Product description

Pack Size: 2 Pack

• Powder Coated Black Steel Motorcycle Wheel Chock
• Width: 7" - Fits a Tire up to 7" Wide
• Depth at Widest Point - 12"
• Tall - 12"
• Weight - 6 lbs
• E-Track Motorcycle Chock mounts into your E-Track System that is mounted onto your floor.
• Stabilizes your motorcycle on your trailer.
• Always secure the wheel with a tie-down strap (sold separately).
• Made out of strong Steel that is corrosion resistant and black powder coated.
• Protect your trailer floor from damage with our rubber pad that is attached to the bottom of the motorcycle wheel chock.
• Wheel Chock can be installed permanently installed on your trailer with the holes in the base. Hardware not included.

• Pack Size: 2 Pack
• Powder Coated Black Steel Motorcycle Wheel Chock
• Width: 7" - Fits a Tire up to 7" Wide, Depth at Widest Point - 12",all - 12"
• E-Track Motorcycle Chock mounts into your E-Track System that is mounted onto your floor.
• Made out of strong Steel that is corrosion resistant and black powder coated.

Product description

Bolts directly to the floor of any truck, van or trailer

Features lustrous chrome-plated, heavy-duty, thick wall steel construction

Includes mounting bolts, nuts and washers

Made in the USA

• Bolts directly to the floor of any truck, van or trailer
• Features lustrous chrome-plated, heavy-duty, thick wall steel construction
• Includes mounting bolts, nuts and washers
• Made in the USA

Product description

Our durable removable motorcycle wheel chocks are designed to stabilize a motorcycle by the front wheel. Simply slide the front wheel into the wheel chock and then secure to the trailer or garage floor with the use of ratchet straps. The motorcycle wheel chock easily installs to a trailer floor, truck bed and even your garage floor. The mounting washers are bolted to the floor and the locking pins are secured to the chock. Specifications: Height: 9" Interior Width: 5.75" Total Length: 12" Holding tires up to 5.5" wide. Made of thick-wall steel tube construction and feature a chrome finish. Mounting brackets remain fastened while the chock is easily removed by unscrewing the T-bolt hold-down screw. Can easily be removed when not in use. Stabilizes the front wheel of a motorcycle for trailer transportation.

• Standard stopper cradle holder for motorcycle & bike front wheels up to 5.5'' Inches (14cm) wide.
• This removable chock is made of thick-wall steel tube construction and feature a chrome finish.
• Simply drive your bike into the chock to lock the front wheel securely in place. It’s even a one-person job!
• Stabilizes the front wheel of a motorcycle for trailer transportation. The included hardware provides quick installation and removal of the wheel chock without tools when you don't need it.
• Fits wide-profile dirt bikes, dual sport bikes, adventure bikes, sport bikes, cruisers, or motorcycles; Ideal for one-person motorcycle loading.
• Fit type: Universal Fit

User questions & answers

Question:	Can you buy just the hardwear
Answer:	they are at least 3 inches, I bolted it to a 2x6 board.
Question:	What size are the bolts for mounting the brackets to the trailer
Answer:	Yes it works well with all kinds of motorcycle great product!!!!!!
Question:	I own a 2012 yamaha fz1, would this particular chock be safe for the front desk brakes
Answer:	Thanks for your question,the chock comes with 1 set hardware, we suggest you to check if you can get extra sets from local store.
Question:	Is there a way to get extra mounting hardware? It would be nice to have three sets of mounts so you could move the chock around
Answer:	Do not know. But a full size Harley front tire fits. That had to be about 6” to 8” or so.

Product description

• Allows for easy one person loading. Simply push or drive the bike into the cradle. The pivoting bracket will close on the motorcycle tire securing the bike in the upright position and allowing 1 person to now secure bike with tie-downs.
• To remove, pull back on your bike and chock automatically releases the wheel.
• Adjust to fit almost any front motorcycle wheel.
• Made from heavy gauge steel, Zinc plated cradle with all necessary mounting hardware included.
• Removable hardware allows for quick removal utilizing your floor for other purposes.
• Comes with a 5 year warranty.

• Allows for easy one person loading. Simply push or drive the bike into the cradle. The pivoting bracket will close on the motorcycle tire securing the bike in the upright position and allowing 1 person to now secure bike with tie-downs.
• To remove, pull back on your bike and chock automatically releases the wheel.
• Adjust to fit almost any front motorcycle wheel. Comes with a 5 year warranty.
• Made from heavy gauge steel, Zinc plated cradle with all necessary mounting hardware included.
• Removable hardware allows for quick removal utilizing your floor for other purposes.

User questions & answers

Question:	anyone have any experience with this with a streetglide with a 21" front wheel
Answer:	I have a 2004 Ultra Peace Officer and it fits great..
Question:	Will this fit the front fender for a 2010 Ultra
Answer:	Thanks for the inquiry! Yes, it can accommodate a 19 inch front wheel.Boss Powersports Outlet
Question:	Will it fit 19 inch tire and wheel
Answer:	In general, the bottom row of holes is for cruisers, middle for sport bikes and top row for off road. This chock/stand should work with any full-sized streetbike that has at least 6" of clearance from the ground to the bottom of the front fender
Question:	without trial and error, which cradle mount holes works best for HD Streetglide
Answer:	Sorry the hardwares are not selling separately.

Product description

Transport and store your motorcycle hassle-free with the 3-Piece Motorcycle Wheel Chock. After a simple bolt-together assembly, the chock holds motorcycle tires up to 5.5” wide and is designed for lighter-duty applications. Mount it in a truck bed or trailer to assist with travel or fasten it to your garage floor for easy storage. Note: The 3-Piece Motorcycle Wheel Chock is intended for light-duty applications and is not intended for use as an unassisted stand for your motorcycle; straps are required for safely securing your motorcycle and are not included. The chock MUST be mounted to a solid surface for safe use. For heavier-duty applications, see the Extreme Max 5001.5763 Deluxe Chrome Motorcycle Wheel Chock.

• Cost effective wheel chock for motorcycle tires up to 5.5” wide
• Mounts to a motorcycle trailer, truck bed or garage floor
• Four-hole mounting pattern
• Easy bolt-together assembly
• Powder-coated steel construction

User questions & answers

Question:	is this 5.5" OR
Answer:	As long as your tire is no bigger than 5.5” wide yes.
Question:	Will this work for a 05 Kawasaki Vulcan
Answer:	No, I had to buy the bolts to anchor it to my trailer. The bolts to assemble it are included. Good quality for the price.
Question:	Does this include the mounting hardware
Answer:	This is not a question.
Question:	POS, never got my refund after shipping back for 1 month
Answer:	It is adjustable ..

Product description

As a Pit Posse satisfied customer, you should already know we take care of all your needs!

What you’re getting:

✔️ Spare hardware kit for ANY Pit Posse wheel chock

✔️ High-quality hardware designed for frequent use

✔️ Cost efficient always in stock for your convenience

Never get stuck without the equipment you need to enjoy our accessories; always have the hardware you need in hand.

ALWAYS BE PREPARED, ADD TO CART TODAY FOR YOUR PEACE OF MIND!

• ✅ Spare hardware kit for ANY Pit Posse wheel chock
• ✅ High-quality hardware designed for frequent use
• ✅ Cost efficient always in stock for your convenience
• ✅ Never get stuck without the equipment you need to enjoy our accessories; always have the hardware you need in hand.
• ✅ Fits Most PINGLE models

User questions & answers

Question:	Do you get the plates or not with this kit
Answer:	The smaller opening, is 7/32 of an inch.
Question:	Someone answered that the larger area of the keyhole is 16mm, how big is the smaller opening of the keyhole
Answer:	Google pit posse. It will give the dimension there.
Question:	What are the overall dimensions of the key plate
Answer:	Yes they will
Question:	Will these fit the buyers wheel chocks
Answer:	Mine is 6.5 inches wide in other words it would accommodate a 6.5 inch tire.

Product description

• Kit consists of 1-chrome wheel chock 3 1/2 inches wide with mounting hardware, 2-recessed flush "D" rings, and 1-pair of tie downs.
• The mounting points allow the chock to easily be removed when the truck bed or trailer is needed for other loads.
• 2-Surface mount tie down points rating: 1,200 . MBR each.
• 1 Pair of tie-downs 6 feet long, 1 inch wide, 1200lb rated.
• Mounting Hardware Included.
• Comes with Instructions.
• 5 Year Warranty.

• ✅ Kit consists of 1-chrome wheel chock 3 1/2 inches wide with mounting hardware, 2-recessed flush "D" rings, and 1-pair of tie downs.
• ✅ The mounting points allow the chock to easily be removed when the truck bed or trailer is needed for other loads.
• ✅ 2-Surface mount tie down points rating: 1,200 . MBR each.
• ✅ 1 Pair of tie-downs 6 feet long, 1 inch wide, 1200lb rated.
• ✅ Mounting Hardware and Instructions Included. Comes with 5 Year Warranty.