12 best scissor jacks

Product description

Warning: These stabilizer jacks are for RV stabilizing and leveling purpose only. NEVER use for lifting, changing tires or supporting weight of any vehicles. Improper use can result in property damage, serious injury or death and will void the warranty!

• Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base
• Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
• Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
• Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
• Capacity: 5,000 lbs per jack, bulit by same material as other brand's "up to 7500lbs"

User questions & answers

Question:	the 40lb item weight, is that for all
Answer:	Yes, I purchased them and they actually weighted about 11lbs each jack...
Question:	How far apart are two top bolts/scissor-arm-axles, center to center? Want to use existing welded plates on frame
Answer:	Hello, If you talking about the bolts in the mounting plate. They are 2 inches apart. Front to back. That is center of bolts. Hope that helps.
Question:	Do these have to be mounted in order to use as stabilizer
Answer:	Yes, have to be mounted either by bolts or by welding, it’s for the safety
Question:	What is the retracted length, is it 12" or 26 ½? Please reply soon
Answer:	I can only verify information on items sold by classacustoms Extend Height: 24" Collapsed Height: roughly 4" Collapsed Length: roughly 27" (this includes screw) If the distance between the ground and your trailer frame is less than 20 inches you should use 24 inch jacks (not 30 inch jacks) Do Not use the scissors jack to lift excessive weight or tires off the ground. Jack is made to stabilize your unit, not lift unit off the ground. Vehicle frame and door jam damage may result. Do Not use these scissors jack as a tire changing jack.

• This camper stabilizer jack features 5,000-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.
• Extended height: 24"; Retracted (collapsed) height: 4".
• Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.
• Includes: 4 leveling scissor jacks, 1 crank handle.
• 1-Year limited warranty!

User questions & answers

Question:	Where are these made? are they made in usa
Answer:	Use
Question:	do these come with a 1 yr warranty
Answer:	Not sure but usually if they work for the first time they will last a long time as long as you don't over load them.
Question:	Can these be used to level a Coleman Niagra popup
Answer:	It should work if you can weld. Or if it has leveling on it already? I disassembled the bracket and put it in the existing bracket.
Question:	I ordered four and one doesn’t work. how do i get the one replaced? who do i contact
Answer:	contact Amazon customer support if there is no contact info for the seller

Product features

Leveling Scissor Stabilizer Jack

Leveling Scissor Jack - 24" Lift - 5,000 lbs

• if your trailer is out of level, you can use your scissor jacks to level it.
• without your scissor jacks engaged, there's a lot of movement in your trailer.
• With your scissor jacks engaged, all that extra movement is gone.
• They're adjustable between four and 24 inches and they have a 5000 pound weight capacity per jack.
• You can easily raise and lower them with the included crank handle.

Features

• Leveling Jack
• Stabilizer Jack
• Scissor Jack
• Camper Jacks
• Capacity: 5,000 lbs
• Extended height: 24"
• Retracted (collapsed) height: 4"

Specs

• Raises, lowers and stabilizes camper
• Remains steady on soft surfaces because of wide bow-tie base
• Bolts or welds on
• Includes 4 steel jack
• Includes 1 crank handle

About scissor jacks

• This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable.
• It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Economy

• This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV.
• Worm-gear mechanisms won't slip.
• Oversize footplates help to eliminate sinking and tilting.

• ★Lift range from 3.85 inches to 17.4 inches; Capacity of 2.5 Tons (5,511 lbs)
• ★Oversized base width for maximum support and stability
• ★Heavy-duty steel frame and saddle
• ★Ratchet handle, Saving strength design

User questions & answers

Question:	What country makes the Leadbrand black steel 2 .5 ton scissor jack
Answer:	I own the same exact stand without casters, to put casters on stand would take cutting and welding, but it could be done. Make sure you check height of stand before welding casters because it will make stand higher.
Question:	Can this be used for a Ford F
Answer:	What in the world do you need a manual for a jack? You tighten the knob and pump the pedal stand goes up loosen the knob and stand goes down
Question:	What the size of the Jack collapsed
Answer:	Not fast at all. Takes many pumps of the pedal
Question:	What size is the hex drive? 17mm? Thanks
Answer:	It's not to heavy, I would guess around 45 to 55 lbs . I know no one lists the weight ? Great lift though I use it on my KAWASAKI KLX 450R . I use it in my shed and store in basement for the winter, So it's not too heavy.

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

Product description

Dr.Roc Helps You To Proceed Without Hindrance

Most trusted auto accessories expert,millions buyers' choice.

It's difficult to lift your car with the scissor jack? 

This adapter make it very easy to use your scissor jack,when it is used with wrenches,especially with power drill or impact wrench.

Specifications: 

Material:Chrome Vanadium Steel(50BV30 Steel) + Composite Steel Material

Exterior:Black oxide finish 

Item Weight: 135 g(4.86 ounces) 

Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches) 

Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep 

Bolt Length: 4.1 cm(1.6 inches) 

Bolt Dimensions: 9.7 mm(0.38 inch) 

( enough to fit most of scissor jacks ,to ensure this ,you can check the oval's size on your jacks)

Easy to use with the following tools: 

A.1/2" drive/impact drills/ratchet or standard drive sockets.    

B.13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill.

Note: 

1.If you don't have a 1/2 inch hex or impact wrench,you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks;

2.This adapter fits most of the scissor jacks in the market, including loop type(hole diameter>9.7 mm) or double eyelet type(hole diameter>9.7 mm, eyelet distance<16.5 mm);

3.There are rare cases some 1/2" drives can't fit this adapter,it is most likely the drive is not strict 1/2",Pls change another drive or contact us to return it.

• If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).
• Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.
• Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .
• Easy to use with the following tools: ▶1/2" drive/impact drills/ratchet or standard drive sockets; ▶13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill; ▶ If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks.
• Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service.

User questions & answers

Question:	Will this work with wagan el2257 12v dc mighty impact wrench, 1/2 inch 12 volt electric impact wrench kit, 271 ft-lbs, tire repair tools with sockets
Answer:	The 1/2 drive will work. My impact wrench has beating motion that appears to me to hard on the adapter. In a pinch I would use an impact wrench.
Question:	will it work with a 20 volt 2 speed drill
Answer:	Don't know....I do not have a 20 volt 2 speed drill. But my cheap 120 vac drill does not have enough torque to turn it. Still I kept this item because it is easier to use on my scissor jack using a socket/socket wrench combination than the bent rod tool on a hole on the "tongue" of the jack. A 1/2 inch drive variable speed impact wrench would be best.. Also, I got this at much lower price after discount due to late delivery.
Question:	Can this be used to replace the handle on a Topwind tubular tongue Jack
Answer:	Not sure. It seems to be designed for a scissor jack only.
Question:	Is this product made in the USA
Answer:	There are no markings that indicate so. Probably like so many other things it is made in ...AS PRESIDENT TRUMP WOULD SAY... CHINAH !

Product description

With this scissor jack you can easily and safely lift your vehicle to the desired height.

This product is equipped with a ratchet wrench and now changing tires is child's play.

In addition, the heavy base plate provides a secure footing.

This product has an excellent quality. It is made of strong steel metal construction.

Resistant to high pressure and corrosion resistant. Every vehicle should have such a jack.

Product Features:

Product type: Scissors Jack with Ratchet Wrench

Maximum load capacity: 1.5T (1500kg/3307lbs) 

Minimum lifting height: approx. 4.1inches(105 mm)

Maximum lifting height: approx. 15inches(385 mm)

Product dimensions:16x3.5x4.1inches (42.5x9x10.5cm)

Product weight gross: 5.2lbs(2.35kg)

Operation Manual:

1. Insert the handle into the hole of the grip

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle in the socket is intact.

3. To increase the load, use one hand to hold the front part of the handle and use the other hand to turn clockwise at the back of the handle.

4. To reduce the load, hold the front part of the handle with one hand and turn the other hand with the back of the handle and slowly with the handle counterclockwise.

Package Included:

1x 1.5Ton Scissors Jack

1x Ratchet wrench

• Load capacity: 1.5T (1500kg/3307lbs) Dimensions:16x3.5x4.1inches (42.5x9x10.5cm).Height height:4.1~15inches (105m~385mm); Net weight: 5.2lbs(2.35kg)
• The solid base plate also ensures a secure footing, the product can be quite comfortable and easy, folded, carried in the vehicle
• It is widely used for smaller to medium vehicles such. B. Pickups, Station Wagon, Van, SUV, Big Van, Mini Bus
• Especially when driving over long distances, this jack should not be missing in your car. In the event of a flat tire, you can quickly and easily make a change with it.
• Including: 1x 1.5T (1500kg/3307lbs) jack; 1x ratchet wrench

User questions & answers

Question:	The purpose of the blue towel in one of the pictures
Answer:	Hi, dear, thanks for your asking. The blue towel prevent scratches on the paint surface, but in our package include not this part.
Question:	i can used in ford explorer
Answer:	Oh yes you can!
Question:	What's the size of the hex head on the jack that the included ratchet wrench attaches too
Answer:	3/4inches(19mm)
Question:	Will this work with Tesla Model Y the close position should be
Answer:	Do not use this jack for anything. It is unsafe and dangerous. Bad design

Product description

The LEAD BRAND scissor jack is a fast and labor-saving design.

The package size of Jack is 15.55 *3.43*4.33 inches and the maximum height is 16.54 inches.

The load of this scissor jack is 1.8 tons(3968lbs).

The threaded shaft of the jack is solid and the steel plate is thickened.

The maximum height of the jack is 16.54 inches, and the steel column at the top can be disassembled,which is suitable for cars and sports utility vehicles.

The jack is designed to be labor-saving. It is easy to lift the car when operating.



Usage Method:

1. First park the car on a flat hard road and turn off the engine.

2. Second fix the other three tires with tire pads or bricks.

3. Third turn the screw shaft of the jack by hand to control the jack to rise until the top of the jack is against the underbody.

4. Fourth when the car operates the jack, there is no need to install the steel column of the jack.

5. Fifth put on the jack ratchet wrench and shake it back and forth to control the jack to rise, and stop the operation after the tire is off the ground.

6. Sixth switch the ratchet wrench button and operate the control jack back and forth to lower.

• Load 1.8 tons(3968lbs).
• It is suitable for cars and sports utility vehicles.
• The bottom is bigger.
• Net weight is 5.36 lbs.
• The heightening steel column can be removed.

User questions & answers

Question:	Will this jack lift a truck
Answer:	Dear Yulitzi.The load of this scissor jack is 1.8 tons(3968lbs).The maximum height of the jack is 16.54 inches, and the steel column at the top can be disassembled,which is suitable for cars and sports utility vehicles.Thank you for your approval of the product.
Question:	can I use this with a impact gun
Answer:	I use a battery impact wrench. It works but beats up the nut a bit. I don't have a battery drill type unit, but probably would use one.
Question:	Where the lead brand manufactured at
Answer:	Mine came in a package that had exclusively Chinese writing on it. I can’t read Chinese but it’s safe to assume somewhere on there it said made in China.
Question:	Can this be used to stabilize a pop up camper
Answer:	Should be able to as it has a screw in adapter.

• ✅ SPECIFICATION - Maximum lifting weight: 1.5 Ton (3,300 lbs). Lift operating distance from 4.13 inches to 15.15 inches. Net weight 5.34 lbs (2.42 kg).
• ✅ SMART MECHANISM - 90% less effort required to lift your vehicle with the innovative ratchet system.
• ✅ FLAT TIRE REPAIR - For any emergency, this Scissor Jack will help you change your tire fast and easy.
• ✅ UNIVERSAL - Designed to fit any vehicle: sedan, coupe, SUV, MPV, hatchback, crossover, wagon and more.
• ✅ GUARANTEED PURCHASE - We know you have options here, and we know that our quality is superior, so we want to make the best choice the easiest one. That's why we will refund you 100% if you have a single concern about ANYTHING. Just send it back our way for a replacement or full refund! The choice is yours.

User questions & answers

Question:	will this work on a 98 acura integra
Answer:	I returned this jack because it was sub par .. scissor jacks work on any vehicle with the proper jacking points.
Question:	Can the alignment head be removed or replaced so that heavy items other than a car can be lifted
Answer:	The alignment head is held by a large rivet.
Question:	This will works with Dodge Dart 2014? Thanks
Answer:	Yes. It works perfectly for that car model.
Question:	Will this fit in the jack compartment of a 2010 jeep wrangler jk
Answer:	What is the width and length, and height? Measure your jeep and check the measurements of the jack.

Product features

Scissor Jack for Car

Package Include:

• 1 x Scissor Jack 1.5 Ton
• 1 x Ratchet
• 1 x Product Manual
• 2 x Car Air Fresheners

How to use?:

1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. The ratchet does not rotate until there is pressure on the jack head (at the beginning you can turn it with your hand).
5. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

Product description

Compact, Light Weight to Carry in Your Automotive

Pro-Lift T-9456 Grey Scissor Jack is the 3000 pound capacity scissor jack. It is a great light weight jack for the garage or to carry in your automobile.

The compact size and the light weight make it easy to position and the handle design makes it easy to lift.

With its built-in extra wide base, it provides you with the additional stability.

Pro-Lift T-9456 Grey Scissor Jack gives you the lifting range from 3-3/4 inches to 15-1/8 inches

- Extra Wide Base for Extra Stability

- Lifting Range from 3-3/4 inches to 15-1/8 inches

- 3,000 Pound Rated Weight Capacity Scissor Jack

- Meets or exceeds the latest ANSI/PALD standards

Specifications

- Capacity: 3000 Lbs

- Package Dimension: 17.2 x 3.9 x 4.7 inch

- Lifting Range: 4-1/8 to 15-1/8 inch

- Item Weight: 9 Lbs

Pro Lift T-9456 Scissor Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to carry in your automobile.

• The product is 3000lb scissor jack
• Easy and simple use kit
• The product is manufactured in china
• Extra wide base for extra capacity and stability
• Lifting range from 3-3/4 inches to 15-1/8 inches
• 3,000 pound rated weight capacity scissor jack
• Meets or exceeds the latest ANSI/PALD standards

User questions & answers

Question:	Is there any kind of warranty
Answer:	China. All the products sold in OESS store are made in China.
Question:	Can i use if for cars
Answer:	Hasta el momento no tiene ningun problema, esta plataforma tiene cuatro soportes de hule que ayudan a que no se desplace ni oscile.
Question:	I have a Dodge 2500 truck..Do you think it will work for changing 1 wheel at a time
Answer:	There is some side-to-side mechanical play when fully extended which is about 0.5 to 1.0cm. Also, when fully extended there is some play in the tilt of about 3 degrees. It is not rock solid so it will depend on your application whether or not the mechanical play is an issue or not.
Question:	does it come with handle
Answer:	The maximum loading capacity up to 110lb(50kg)

Product features

Pro-Lift T-9456 Grey Scissor Jack - 3000 lb. Capacity

Features:

• 3,000 lb capacity scissor jack
• Extra wide base for extra capacity
• Lifting range: 4 1/8” to 15 1/8”

Product description

Max Load Capacity: 2T(4410lb), Net weight: 6.5lb Lift Range: from 4-1/8" to 15-1/8" Material: High Quality and Superior Steel. Saving Strength and Stable Design Suitable for auto, SUV, trailer, station wagon. In case of flat tire, you can quickly and easily make a change with the scissor Jack. Portable and easy to use Built for extra lifting Heavy duty metal frame Stabilize or lift your car, trailer or SUV minimum height from 3.5 inches to maximum height 13.8 inches High quality Scissor Jack ★ Maximum load: 2.0T (2000kg/4,409 lbs); Lifting height: 4"~17.3"(105m - 480mm); Net weight: 7.3lbs /3.30kg ★ With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy hand crank and the smooth-running spindle, changing tires is child's play from now on ★ Product features: The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure ★ Suitable for: Station Wagon, Van, SUV, Large Van, Mini Bus ★Including: 1x 2T jack ;1x Ratchet wrench

• Material: High Quality and Superior Steel.
• Design：Saving Strength and Stable Design，Portable and easy to use
• Product features: The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure
• Including: 1x 1.5T jack ;1x Ratchet wrench
• Suitable for auto, SUV, trailer, station wagon. In case of flat tire, you can quickly and easily make a change with the scissor Jack.

User questions & answers

Question:	How is it on vw jetta 2010 pinch welds? does it destroy them
Answer:	Stainless steel
Question:	Will this jack work on Mercedes Benz c
Answer:	There are male and female connectors in this set. You cannot connect male to male.
Question:	Will this work on Toyota Tacoma 2007 Truck
Answer:	No
Question:	Will this jack lift a Nissan Rogue
Answer:	No the connectors are not keyed. Just be aware of the wire color when plugging to another connector.

Product description

The Lead Brand scissor jack is 1.5 Tons (about 3,307 lbs) .

It can be used when you need to repair the tire.

The compact size and small volume can be easily to preserve.

The raise of maximum height is 385mm(15.16") and it suits for most sedans.

Collocating with wrench can lift the car easily.

The thickness of steel is 3.1mm(0.12") and the net weight is 2.76kg(6.08 lbs) .

After testing the plant summed that the scissor jack can lift the car which is 1.5 Tons(3,307 lbs).

The utmost is 1.6 Tons(3,527 lbs).

Comparing with hydraulic jack, the scissor jack is conveniently and easily to operate.

The product highlight is our saving strength design,it can let you feel easy to operate the scissors jack.



Usage Method:

1. Fasten the rest three tires using pads or bricks

2. Turn the jack by hand until the jack elevate the vehicle botton.

3. Put the ratchet wrench into the jack, and then turn the wrench. After that we can elevate the jack.

4.Adding engine oil (not included) into screw of Jack, it can make the screw rotation more smoothly, and reduce the jack noise.

• Net weight :2.86kg(6.3 lbs), Lift range from 4.09 inches to 15.15 inches
• With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy ratchet handle and the smooth-running spindle, changing tires is child's play from now on.
• The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure
• Ratchet handle Saving Strength and Stable Design

User questions & answers

Question:	Will this work for my 2008 Ford Edge
Answer:	eBay, their overseas sellers are setup to meet this type of demand.
Question:	Will this work for my Kia Sorento
Answer:	Check this URL: https://en.wikipedia.org/wiki/JST_connector It's Wikipedia and has specs for every JST connector available. This kit is the SM series.
Question:	Will this work for a Toyota Prius
Answer:	These are only connectors. as long as you don't exceed the connectors limit. its up to you on how or what circuit you are going to use it for. Hope i helped you out
Question:	Made in China
Answer:	Yes