12 best motorcycle lift jacks

• REINFORCED LIFT CAPACITY：With a hefty lift capacity of 1200 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
• DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
• XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
• NON-SLIP DECK & GLOVES: The lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
• NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.

User questions & answers

Question:	Can it be used for scooters , mopeds
Answer:	When the battery expires (after 7 years), you can send it in to ACR to have it replaced for $150. Or if you like taking risks with your life, you can replace it yourself for $5(it runs on 3 CR123A cells, welded and heat shrinked into a single battery pack).
Question:	Has anyone with a Milwaukee 8 used this successfully
Answer:	It works wold wide in any location as it communicates with the satellite. However once it's activated it will be transmitting signal for 24 hours. If you are in a distant location that search and rescue needs more than 24 hours to find you then we recommend getting any of our EPIRBs, GlobalFix V4, Pro, or iPro. They last from 48 to 65 hours.
Question:	Will it work with a ninja 650? And where am I supposed to position it
Answer:	The unit will keep blinking while the signal is been transmitted. There is no return confirmation only sending out. However, you are able to test the unit before going out on a trip by performing a self-test.
Question:	Honda vtx 1300 r weighs 726 lbs. big crusier motorcycle. nobody has used it like this heavy and type of motorcycle. just need to know will it work
Answer:	I'd say fairly difficult. That yellow flap on the front protects the activation mechanism and the spring is fairly robust.

Product features

Orion Motor Tech Motorcycle Scissor Jack Stand

• COMPACT AND FUNCTIONAL - This compact hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting mechanism which is able to hoist up to 1500 lbs
• HIGH-QUALITY MATERIALS - Made with a durable steel frame and high-quality, non-slip rubber lift pads, this jack is able to lift your machine without damaging itself
• SAFETY FIRST - Comes with a 3-position safety lock mechanism, fix your vehicle without worry
• EASY TRANSPORT - Built with a handle and swivel casters, the jack is easy to transport and simple to stow
• MANUALLY OPERATED - The jack can be operated manually by foot pedal ; Comes with two tie-down straps, two adapter bars, and a detachable handle

User questions & answers

Question:	Will this work for a vucan
Answer:	Hi Kermit, sorry it's been a while since I logged on to Amazon. I'll start by saying that I used a 62 doing surveys as a contractor with DHS. It was a fine unit and did its job. In my work I never had to push any of its features to their limit so for us, it was very adequate. Having said that, when it came time for me to purchase a GPS for myself, I wanted the newer model, so therefore I went with the model 64. Keep in mind, both are base models for their respective series, so they do not have the fancier features of the s and st. As far as comparison, the 64, being newer has a bit more, but not that you'll necessarily notice. It depends on your use 64 62Built in Memory: 4GB vs. 1.7GBWaypoints: 5000 vs. 2000Data cards: Accepts microSD vs. Does not acceptGeocaching: 250,000 preloaded vs. paperlessHigh SensitivityReceiver: GLONASS AND GPS vs. NoneThere are complete lists on the internet as to which does what. I believe they are both pretty good units but the 64, being newer, is updated with a few more features and a bit more memory. the only drawback I can think of is that it lists the battery capacity at 16 hours vs 20 for the 62. In addition, I don't know if you can even get the 62 anymore. Once again, having used both, I see not major difference if you're just going to use it for some hiking, biking, getting your position, bearing, etc. Unless you're a scientist or you're going to load all kinds of data or save copious amounts of data or the like, I doubt you'll even notice the difference. I do believe the GLONASS does make a big difference in speedy acquisition of satellites, though. Sometimes it's acquired a fix even seconds after I turn it on. Is it a big deal? Not really, but hey, that might speak to the sensitivity of the unit in the field. So far, I'm happy with it. I hope this helps answer some of your questions.
Question:	What is the height of this jack in it's compressed possion
Answer:	Hi Eric! Thanks for the great question! The Spot X 2-Way Satellite GPS Messenger requires a subscription to use the device. A major advantage is that you can commit to a service plan that is a Month to Month commitment and only costs $14.95 Per Month. If you decide that your willing to sign up for the year, the rate drops to $11.95 per month. If you have any other questions, feel free to reach out!
Question:	Jack doesnt work with motorcycle
Answer:	Hi Brian! The Spot X GPS Satellite SOS Messenger requires that you have a service plan to utilize all of the unit's capabilities. Features such as the Waypoint you mentioned; will only work once you have set this up. The good news is that you do not have to commit to an annual service agreement. Instead, you can pay month to month without the long term commitment. So, for example, If you locked in a time to travel or hike and have advance notice, you can time the monthly service plan to suit your needs and turn off the subscription at your discretion. I hope that helps!
Question:	How log are the lift pads and what is the width of the lift cradle
Answer:	Yes, SPOT GEN4 provides 2-way satellite messaging when you’re off the grid or beyond reliable cellular coverage.

Product features

VIVOHOME 1500 LB Motorcycle Hoist Jack

VIVOHOME’S Motorcycle and ATV lift is made from high-quality steel designed to be easy-to-use, portable, and strong enough to handle small personal vehicles like dirt bikes, motorcycles, jet skis, snow mobiles, and ATVs. After the machine has been loaded onto the jack adjustable locking screws secure the wheels in place to provide stability and safety. Along with a three-position safety lock, this jack will secure any machine you might need to repair.

More About The Product:

Product Specification:

• Material: Steel
• Package Dimensions: 32.28”L*16.34”W*4.92H”
• Item Weight: 62lbs

Package Include:

• 1 x Lift Jack
• 1 x Handle
• 2 x Tie-Down Straps
• 2 x Adapter Bars
• 1 x Manual

Non-slip Rubber Pad

Prevent the projects slipping while lifting up

Swivel Casters

Easy To move, position And transport

Durable Footplate

Easy to operate, time saving and labor saving

Product description

OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road. With the lowest clearance available - 3-1/2 inches at it's lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches, this versatile jack is perfect for occasional use in your home garage or for the heavy user at a busy shop. Removable handle provides 360 degree access to load and T-handle design makes maneuvering the jack easier. Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use. Two-year limited warranty. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road
• Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches
• Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier
• Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use
• Two-year limited warranty

User questions & answers

Question:	I have a 2020 indian scout (abs). will this work
Answer:	Hello! Thank you for your interest in GeoZilla GPS Tracker! You can set the frequency of location updates from 5 to 30 minutes.
Question:	Could this be multipurpose ....used to lift mowers, atv's etc. to work underneath them? Maybe if I fabricated an accessory
Answer:	Thank you for your question! '5 minutes' is the minimum interval for the location to be requested automatically. You can always request an update by tapping 'refresh' in the application. This way, the location will be updated within a minute. If you have any questions, please send us an email at our support email address (it can be found on our official website).
Question:	I see the skids are 17" long, but what size is the overall lifting area and how wide are they
Answer:	No
Question:	I have a 2014 Road King is there any other parts needed to lift this bike
Answer:	Hello, this device will work in all the world. In case of an emergency situation, the device will inform your GPS coordinates to the rescue team in the country where the device is reprogram and this team will contact the rescue team of the country where you are at that moment. Thank you

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

• NICE APPEARANCE & HIGH QUALITY - Heavy duty and solid steel construction in a red and black powder coated finish. The paint is for easy cleanup, oil-resistant, grease-resiatant and dust-resistant
• ANTI-SLIP DESIGN - Top surface is designed a durable rubber pad with striped veins, which is benificial to prevent slippage and scratching
• MULTIPURPOSE - The jack fits most motorcycle models including cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
• EASY TO OPERATE - Attached with a free crank for easy operation. Just rotating the metal sleeve to lift a motorcycle easily, a really excellent helper for motocycle repair
• DURABLE & HEAVY DUTY - Maximum lift height: 14.5 Inch. Total weight capacity: 1100 lbs. For use in the garage, shop, or at the track

User questions & answers

Question:	What is the size of the bolt that lifts the table? Are the threads Acme or sae
Answer:	There is only about 1/8” space between roller and platform.
Question:	My Harley is lowered and I need a stand with no more than 3.5” to slide under it. Is this exactly 3.5” height when completely folded down? thank you
Answer:	As long as the air consumption is correct.
Question:	what is max hight
Answer:	It definitely does not require 15scfm. My compressor is rated at 5.8@90psi and will keep up with this gun all day long
Question:	Considering bolting plywood to the platform. Concerned about bolt head interfering with mechanism. Any space between roller and underside of platform
Answer:	It uses 15cfm of air. But man if you have a shop Compressor and get the gun set right It paints nearly as well as my devilbiss gti pro which uses 16cfm of air also. I would love to get the 1.8 version one for primer. Give it 25 to 29 psi I stay around 2 bar. If you wanna lower air consumption use smallest fan as possible to get the desired finish and project time. A great gun for a smaller compressor is the mp400 Cartman sells I'm about to buy another. It's a really great gun as well. Most of the parts will interchange with the 400 series and its marked right at 4 to 7 cfm. I can use it with a 1.8hp 26 gallon kobalt air compressor. With minimal recover time. Has a nice fan and droplet size. But if you have a shop compressor that can put out 12 15cfm at least get both but this one can lay a flat mirror shine. I've done two jobs and ask people at work which gun did what. This gun will spray just like a gti pro. I bought this gun when Cartman first came on amazon. It was like 25 back then and I'm not surprised in the least it's 41 now. I'm getting another for back up. For any professional spray painters, serious DIY guy with a shop compressor. If you have a home portable compressor you will be taking lots of breaks if you paint large projects. I'm using it on 2 stage 80 gallon 175psi 27.5cfm at 175 pai compressor. It runs the mechanic shop, welding shop and my paint booth. And 99 percent of the time I'm the only one using it. And it runs it hard it'll keep 2 bar mostly until shop uses a impact or something. It'll be like 80 to 100 pai when I release the trigger. Regulator at the wall drops to 45psi under full air. So Ya hope that helps people it's a air monster but a beast of a gun. Any serious apprentice or DIY needs this gun and the mp400. Must haves. The mp400 is great for home 1.5-2.5 compressors. Small fan and wind fluid in some it'll take longer but use less air and get proper atomization

Product features

VIVOHOME Wide Deck Scissor Lift Jack 1100LB

VIVOHOME motorcycle center scissor lift jack with safety pin and wing design on each side, exhibits great stability and safety prevention, suit for cruisers, trikes, Can Am Spyders, ATVs, UTVs, etc. Release your hand to do more important jobs, perfectly the best partner in your repair work.

Enjoy The Fresh Ice with Cool Feeling

Product Specification:

• Product Dimensions:14.57 " x 9" x 4.5"
• Minimum Height: 3.25"
• Maximum Height: 13.25"
• Weight Capacity: 1100 lbs.
• Platform Dimensions: 16" x 10"

Package Included:

• 1 x Scissor Mini Lift
• 1 x Handle
• 2 x Adjustable Plate

Removeable Crank Handle

Wide Deck Base

Durable Center Shaft

Product description

The Torin BIG RED T64017 service jack is the ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs. It features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity. This wide-load bearing jack is intended for the powersports enthusiast for maintenance or even lifting for off-season storage. The Torin BIG RED T64017 service jack is equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar. The powder-coat finished exterior provides long-lasting durability. Includes a limited 1 year manufacturer warranty.

• Ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs
• Features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity
• Equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar
• Wide-load bearing jack is intended for the powersports enthusiast for maintenance or even lifting for off-season storage
• Powder-coat finished exterior provides long-lasting durability; Includes a 1 year limited manufacturer warranty

User questions & answers

Question:	How long are the lifting pads
Answer:	It’s no more than 5-6 in.
Question:	what is the collpased size? I have 4.5in clearance under my Can-am Spyder
Answer:	Bought it to use it with my bike but since the underneath of my bike is round it, it won't work. I use it for my lawn mower.
Question:	Did anybody used one of these jack on a stock Sportster Iron
Answer:	Pads are 2’’ wide and 12’’ long and there is approximately 1’ between the pads. My street glide is off the ground on the jack now for the winter. Great piece of equipment.
Question:	what are the dimensions of this item
Answer:	Yes. You can select the shipping method during check out

Product features

Torin BIG RED Motorcycle / ATV Jack: 3/4 Ton (1,500 lb) Capacity

Wide Load Bearing Platform

5 Locking Positions

3/4 ton (1,500 lb) Capacity

Locking Swivel Casters

Product description

Specifications

This power jack is designed for use in the garage, shop, or at the track.

Designed to fit most motorcycle models.

This lift Jack features a rubber mat on the lifting platform to grip the bottom of the bike and increase stability.The mat will also prevent slippage and prevent scratches.



Product Dimensions:14.57 " x 9" x 4.5"

Minimum Height: 3.25"

Maximum Height: 13.25"

Weight Capacity: 1100 lbs.

Platform Dimensions: 14.5" x 9"

• 1,100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation
• Widen deck (wide 9'') with safe rubber surface to prevent slippage and scratching
• Solid & Sturdy steel construction with a red paint finish
• This motocycle lift repair stand is Designed to fit most motorcycle models,For use in the garage, shop, or at the track
• Platform Dimensions: 14.5" x 9",Weight Capacity: 1100 lbs.

User questions & answers

Question:	How stable is this lift side to side as viewed from the lift handle? I will support only 25 pounds, but stability is necessary for accuracy
Answer:	Even if there weren't holes you could drill them and Volta simple board on it's not that hard the unit works well lift just fine actually very easily my bike weighs a little over 530
Question:	My kawasaki 900 vulcan classic's engine protrudes below the chassis., making all the weight of the bike rest on this point of contact. not a good idea
Answer:	I do not know. I use it on my Sporty
Question:	I see this can be used for oil changes. I have a Suzuki Intruder but how do you get a pan to catch the oil if this sits directly on the platform
Answer:	Might be a bit sketchy. It lifted my 14 strom okay. 550 pounds... street glides...might go with something more secure. I had to use other means just to balance mine when removing wheels. Hope this helps. Good luck!!!
Question:	How high does it extend to? I have a dirt bike that has a foot of clearance
Answer:	Yes the saddles are actually height adjustable. They are mounted on a screw and can be spun 360 degrees, but it also adjusts the height.

• COMPACT HALF-TON JACK: This powerful little motorcycle lift by Orion Motor Tech easily jacks up and lowers your standard, cruiser, touring, or sport bike up to 1100 pounds with no more assembly required than fitting in the easy-to-use T-handle
• HIGHLY STABLE: Our center stand's 15x9 inch platform holds your vehicle firmly thanks to rubber padding that prevents slips or turn-overs; the wide threading on the central shaft also keeps things nice and steady going up or coming down
• SLIM-FIT DESIGN: The 3.7-inch minimum height on this compact bike jack slips right under any motorcycle, even those with sunken chassis; the 13.8-inch maximum height still gives you plenty of room for working on your vehicle's undercarriage
• RUGGED CONSTRUCTION: Our scissor jack offers long term performance under even punishing use thanks to its heavy-duty steel engineered for large payloads and powder coating for superior corrosion resistance
• SATISFACTION GUARANTEED: OMT backs this motorcycle center stand with our usual strong warranty and friendly 24/7 customer service, ensuring that it will serve you well for years to come!

Product features

Orion Motor Tech Motorcycle Scissor Jack Stand

• Lift custom motorcycles, ATVs, and other powersports vehicles weighing up to 1,500 lbs. for service and maintenance
• Hydraulic foot pedal operation with a removable 27" jack handle
• 12" x 2.5" protective rubber saddle surface pads, commercial grade caster wheels
• Integrated tie-down points to secure motorcycles and ATV's with 3 position lift lock mechanism
• Heavy duty steel construction with a black paint finish

User questions & answers

Question:	Will it work to get wheels off a ultra classic for new tires
Answer:	Correct. The ResQLink View is the PLB-425 (#2922)
Question:	What is the minimum height required under the vehicle
Answer:	Yes, it does!
Question:	Where is this made
Answer:	The PLB purchased in the US will be programmed. It will need to be registered with NOAA. In case there is an emergency in another country, NOAA will notify the local search and rescue agency based on your GPS location.
Question:	Do you have the J &S motorcycle lift
Answer:	It is audible but you can set to silent. Mine are set to silent since they are on cats.

Product features

Black Widow Hydraulic Motorcycle & ATV Jack

Sold individually

The Black Widow Hydraulic Jack makes it easy to service and clean your motorcycle or ATV. This high quality jack has a 1,500 lb. capacity so it can handle even the largest of machines. The lift height range is 4.875" to 16", and it has four integrated tie down strap loops. Standard 13.375" x 2.75" rubber pads on the lift arms protect your vehicle's frame. A spring-assisted hydraulic foot pedal with non-skid rubber padding lets you keep two hands to hold the motorcycle or ATV while lifting. The rear caster wheels have ball bearing swivels to roll around the garage when working on the motorcycle or ATV. The removable jack handle makes it easy to move the motorcycle lift around the shop. Safety lock arms with three lock positions keep the ATV-motorcycle jack from lowering for added safety.

Padded top lifts without scratching

Suitable for ATVs and motorcycles up to 1,500 lbs

Hydraulic action with long repositioning lever

Black Widow - Motorcycle Jacks and More

Black Widow offers affordable loading, unloading, transportation and service options for powersports users with motorcycles, dirt bikes, ATVs, and more. Our powersports jacks are quality products designed to provide an easy way to safely work on your recreational vehicles in the comfort of your garage or shop.

• NICE APPEARANCE & HIGH QUALITY - Heavy duty solid alloy steel construction in a red and black powder coated finish; 3" wing design on each side of base strengthens and stabilizes
• ADJUSTABLE & SAFE DESIGN - Comes with 2 screw adapters for variable height adjustment; 12cm/4.72" removable crank handle is for easy repair-operation; Extra bolt added for safety
• MULTIPURPOSE - The jack fits most motorcycle models including cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
• SUITABLE SIZE AND HEAVY DUTY - Top platform measures 17.72" ×5.91" (wide surface plate). Lifting Range from 3.75"(95mm) to 15.75"(400mm); Total weight capacity max: 1100 lbs
• EASY TO OPERATE - Just rotate the metal crank to lift motorcycles easily; The jack is ideal for the garage, shop or track

User questions & answers

Question:	Will this work for a polaris rzr 800 s
Answer:	The platform is 13 5/8” x 16 1/4”. Hope this is helpful. This unit is very well manufactured and I love it.
Question:	Where was this lift manufactured
Answer:	The description should tell you. I believe it is 300 pounds. Nice unit!
Question:	Does this have a locking pin for storing a bike
Answer:	Sorry, can’t answer your question, as I bought this lift to serve as a support for the rear air conditioning plenum in my VW Vanagon while I repaired the broken support ears on it. But, here’s the amazing part....my project was put on hold in summer of 2019. I have had the lift in the back of the van since that time supporting the plenum. It hasn’t dropped even a fraction of an inch! The plenum doesn’t weigh a great deal, maybe 40 lbs, but still, that’s a long time to remain in the support position! So, I definitely give this lift a big “thumb’s up”! Sorry I couldn’t answer your question about the pegs...
Question:	Will work on a 78 Kawasaki KZ
Answer:	Honestly, I've never done this test to see how many strokes are required to elevate this from A to B. But the whole point of using this device is the mechanical advantage it affords; you step down with say a 6 inch stroke and it rewards you by raising the platform a half inch 'with your heavy motorcycle on it.' Now I've looked on Amazon at their 'stair stepper' exercise equipment. Prices range from $50 to 1500 for the good ones. Not even one that I saw said they could pick up your motorcycle as you work out, making this item unique.

Product features

VIVOHOME 1100LB Motorcycle Center Scissor Lift Jack

VIVOHOME motorcycle center scissor lift jack with safety pin and wing design on each side, exhibits great stability and safety prevention, suit for cruisers, trikes, Can Am Spyders, ATVs, UTVs, etc. Release your hand to do more important jobs, perfectly the best partner in your repair work.

Enjoy The Fresh Ice with Cool Feeling

Specifications:

• Material: carbon steel, powder coated finish
• Color: Red & Black
• Max. Capacity: 500kg(1100lbs)
• Adjustable Height: 9.5cm-50cm/3.74"-19.69"
• Platform Size: 45cm x 15cm/17.72" x 5.91"

Package Included:

• 1 x Scissor Mini Lift
• 1 x Handle
• 2 x Adjustable Plate

Removeable Crank Handle

Anti-slip Rubber Support

Durable Safety Pin

Product description

Ideal for bikes with higher suspension.

• Capacity: 1100 lbs (500kgs)
• 2 screw adapters for variable height adjustment
• Lifting Range: 3.5"( 90mm) to 15 3/4"(400mm) without 2 saddles and adapters
• Simple crank operated jack
• Safety Pin with 6 locking positions to prevent accidental drops

User questions & answers

Question:	Where can you get parts at for lift my showed up and lift screw stripef out
Answer:	How do you contact lift master? phone number? need a bearing for my lift.
Question:	What are the jack dimensions? Length width and how low it seats with saddle
Answer:	As advertised
Question:	Just had this lift fail and almost cost me a hand. How do we contact for warranty. Not even 6 months old
Answer:	If you still have the paperwork for the lift, refer to the instructions. Not sure how much you were trying to lift, but I've NEAR MAXED mine out, and it still worked perfectly. You might have a factory defect..? If you don't have the paperwork.......contact Amazon. They are great, and will help you with your return/replacement.
Question:	what is the collapsed height (minimum height
Answer:	Collapsed height is 4 inches.

• Solid steel construction in a red and black powder coated finish
• Two variable screw adapters
• Simple crank operation
• 12 cm removable crank handle
• Fits Cruisers, Choppers, Can Am Spyder, Trikes, Sport Bikes

User questions & answers

Question:	I see there are machined holes on the top platform. Can these be accessed from underneath to bolt a board on top? I'd like to use this to lift an an
Answer:	There isn't as much padding as you may be used to for side crunches.
Question:	will this jack fit my 1998 dyna wideglide? the kick stand is in middle under the frame. It is not up front on the frame by the shifter
Answer:	Hello, thank you for asking! you don't need to lay down all the way back when doing crunches, lay back until you feel pressure on your abdominal muscles and then pull forward to complete the exercise.
Question:	How will it do lifting my 09 street glide
Answer:	hello, side crunches is not for this unit.
Question:	Can you turn the black "saddles" around? Seems like they would need to go 90 degrees from the photos for frame rails
Answer:	No