10 best camco scissors

Product description

This marvelous Moz Nickel Plated finish Mini trombone is perfect for student. It features in flawless Nickel Plated finish, in detail craftsmanship, and outstanding concert level sound This Moz Mini trombone is worth every penny you invest on it!

• Flawless Nickel Plated Finish
• Durable High Quality Brass Body
• Key of Bb
• Bore Size: .469”, Bell Size: 4.724”
• Mouth Piece: included, Case: included

User questions & answers

Question:	Do trumpet mouthpieces fit in this? Or does regular trombone mouthpieces fit too? Or only the included one
Answer:	This facial exerciser helps reduce the risk of concussion. Helps redefine the jawline. Helps strengthen jaw & facial muscles. Helps improve physical appearance. Helps remove double chin/ turkey neck. Helps mitigate physical & mental stress. Helps reduce the risk of potential jaw injuries
Question:	What is length of instrument with slide in
Answer:	This device is developed to strengthen the muscles after a TMJ surgery or prevent from getting a TMJ
Question:	Is this a soprano trombone (one octave higher than a tenor trombone
Answer:	Basic instructions, boil a pot of water; when it boils, take it off the heat and let it cool for 20 seconds. Put the mouthpiece in the water for about 18 seconds--they say "remove it when the ends begin to curl." That didn't happen with any of the mouthguards I molded, so I suggest you go by the timer. The instructions also say to remove it with a wooden spatula or stainless steel spatula submerged in ice water. I always have trouble removing it with anything but tongs. I tried it today and mangled the guard so badly i had to throw it out. The tongs worked fine, you just have to be gentle.Shake off extra water and put it in your mouth; bring your bottom jaw forward so top and bottom teeth are aligned (you really need to do this) and bite down gently. Use fingers and tongue to shape the mold. It should fit securely so it doesn't fall off your teeth. Hold the position for a minute--also important as this material stays soft longer than any other mouthguard I've used. After a minute pop it out gently and submerge in cold water for two minutes. I pulled it out after one minute to check the fit. If it was a good fit, I put it back in the cold water. If not, I put it back in the hot water to remold it.
Question:	Are there any distinguishing characteristics that separate this instrument from a soprano trombone? Or are they one in the same
Answer:	It does help! You will still clench,but your teeth will be protected!

Product description

Camco's Multi-Purpose Scissors are the ideal tool for camping or at home. The stainless steel blades are detachable and allow it to be used as several tools. Use as a screwdriver, can opener, wrench, de-scale fish, nutcracker, jar wrench, wire stripper, wire cutter, bottle opener, and knife! Everything you need in one convenient tool.

• Detachable blades
• Ideal for camping or home
• Constructed of stainless steel
• One item, multiple tools
• Easy to store and carry
• Fit type: Universal Fit

User questions & answers

Question:	Where are these made
Answer:	They offer money back guarantee on the facial exerciser. Most of the time, our customers do not see results because they are not using the device correctly. Contact them so that they can offer suggestions and useful tips. If for some reason you are still unhappy, you are welcome to return the product within 30 days for a full refund.

Product description

Camco RV Leveling Scissor Jack Socket Drill Adapter With 1/4" Quick Connect Shank, Works With All 3/4" Hex Drive Jacks - 48865

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.



Camco 40043 TastePure RV/Marine Water Filter with Flexible Hose Protector | Protects Against Bacteria | Reduces Bad Taste, Odors, Chlorine and Sediment in Drinking Water

Camco’s TastePURE RV/Marine Water Filter with Flexible Hose Protector reduces bad taste, odor, chlorine and sediment in drinking water with a 20 micron sediment filter. Also features GAC (Granular Activated Carbon) filtration in combination with KDF to prevent undesirable bacteria growth when the filter is not is use. Durable in line, exterior mount filter has a wide body for increased flow. Includes a flexible hose protector to reduce strain on connections while minimizing kinking that could impede water flow. Not designed or tested with fish tanks or ponds. NSF 42/53 listed. CSA LLC (Low Lead Content) certified. Made in the USA.

• Reduces time and effort to raise or lower scissor jacks.  No need for hand cranks.
• Designed to work with 1/4-inch hex quick connect chucks
• Works with all 3/4" Hex drive jacks
• Safe Water Matters: GAC (Granular Activated Carbon) filtration greatly reduces bad taste, odor, chlorine, and sediment
• Large Capacity Filtration: Large capacity in line water filter lasts an average of 3 months
• Multiple Uses: Can be attached to any standard gardening or water hose to provide healthier drinking water and cleaner water overall. Great for RVs, boats, campers, pets, gardening, and much more
• 20 Micron Sediment Filter: Removes particles greater than 20 microns
• ¾ Hex Socket X 1/4-inch hex quick connect shank

Product description

The Ear-Lift J-Hook Drill Attachment aids in raising and lowering your RV's scissor jacks. Quick and easy to use, it eliminates hand cranking and is for manual scissor jacks only. The J Hook fits all 3/8-inch drills and is zinc-plated.

• Helps Raise and Lower Scissor Jacks: Aids in raising and lowering your RV's scissor jacks
• Compatibility: For use with manual scissor jacks
• Fits: Fits all 3/8-inch drills
• Durable Construction: Zinc-plated construction
• Time Saver: Eliminates hand cranking

Product description

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco's Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" quick connect hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.

• Reduces time and effort to raise or lower scissor jacks. No need for hand cranks
• 3/4" Hex Socket X 1/4-inch hex quick connect shank
• Designed to work with a 1/4-inch hex quick connect chuck
• Works with all 3/4" Hex drive jacks
• Heavy-duty forged construction

User questions & answers

Question:	Does this fit 1/4" chuck
Answer:	Yes it fits a 1/4" chuck battery drill works great to put the jacks down

Product description

Camco's Leveling Scissor Jack Drill Socket reduces the time and effort it takes to raise and lower your scissor jacks. The adapter fits 3/8" or 1/2" power drills and works with all 3/4"Hex drive jacks.

• Reduces time and effort to raise or lower Scissor jacks
• Fits 3/8 inch or 1/2 inch power drills
• Works with all 3/4 inch hex drive jacks

User questions & answers

Question:	Why aren't people just using a 3/4 socket and a socket adapter, found in many toolboxes? Is there some advantage to this versus that
Answer:	This 3/4” drill adapters works great, I used an 18v battery Roybi drill worked really well. You could use a 3/4” socket if you use a deep well socket.
Question:	Socket with a slot at end for ldveling rv
Answer:	I use it on my 20' travel trailer
Question:	would this by chance work on a harbor freight scissor jack
Answer:	If they are 3/4" it should work
Question:	I'm curious to know what size cordless drills most people are using. I have a Dewalt 14.4 volt & it won't turn the screw drive
Answer:	I have 18v driver, but I would think a 14.4 should work fine as long as your screw drives for the trailers jacks aren't so rusty that they won't spin. Hit them with some WD-40.

Product features

Adjust in seconds

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply attach the socket to your 3/8" or 1/2" power drill and let the power drill do all the work. It is especially convenient in inclement weather when you just want to get back inside.

The Scissor Jack Socket works with all 3/4" hex drive jacks and uses the torque from the power drill to raise and lower jacks. Simply insert the Scissor Jack Socket into your power drill, connect it to the scissor jack, and press the trigger on the drill to raise or lower the scissor jack.

The Camco Leveling Scissor Jack Socket is made of chrome plated carbon steel, so it is meant to last a lifetime. It has a one-piece construction for added durability and chrome plating that provides protection against corrosion.

Durable one piece construction

Attaches to your power drill

Adjusts scissor jacks in seconds

No more hand cranking

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product description

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.

• Reduces time and effort to raise or lower scissor jacks; No need for hand cranks
• ¾ hex socket x 1/4 inch hex quick connect shank
• Designed to work with 1/4 inch hex quick connect chucks
• Works with all 3/4" hex drive jacks
• Heavy duty forged construction

User questions & answers

Question:	Do these have a warranty? First time to use and it broke
Answer:	3/4 = 19mm 7/8 = 22mm
Question:	How do I contact the manufacturer? It snapped during the third use
Answer:	The item number for the slotted jack drive is 48862 https://www.amazon.com/EAZ-LIFT-Drive-Assists-Anti-Corrosion-48862/dp/B07QRMPTYN/ref=sr_1_9?dchild=1&keywords=Camco+48862&qid=1608047769&sr=8-9
Question:	Is this 22mm
Answer:	Yes. But depends on who snug the shirt or jacket is.
Question:	Do you have the sloted one
Answer:	Yes it does help with continuous use of the brace but gradually. The size should match your shirt size. Please find the size chart in the product images

Product features

Camco RV Leveling Scissor Jack Socket Drill Adapter

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" quick connect hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.

• Reduces time and effort to raise or lower scissor jacks. No need for hand cranks.
• ¾ Hex Socket X 1/4-inch hex quick connect shank
• Designed to work with a 1/4-inch hex quick connect chuck
• Works with all 3/4" Hex drive jacks
• Heavy-duty forged construction

Product description

EAZ- 24' SCISSOR JACK 2PK

User questions & answers

Question:	Those who have bought these, are they still working well
Answer:	Yes 8 mounts now. Holds 6423 lbs trailer moved every 10 days and re set up. We keep them greased and there work like day one.
Question:	Will these lift my Winnebago class A 15,000 pounds
Answer:	Not sure. We bought these for our Imagine 2500RL 30’ TT

Product description

Replacement scissor jack speed crank handle. Use with any of Camco's leveling scissor jacks.

• Replacement crank handle for Camco's leveling scissor jacks
• Heavy duty
• Padded handle for comfortable grip
• Quickly and easily raise and lower your RV

User questions & answers

Question:	Will this work with an 11/16 inch bolt head? Need it for an old school jack. Thanks
Answer:	The handle fits a 3/4 inch hex head exactly. It is hexagonal so would probably fit sloppy on a 11/16 hex bolt head
Question:	do all sissor jacks have same size for wrench
Answer:	NO. The one I ordered was the wrong size for my jack. They should list the size in the info section of the item description.
Question:	Will fit on my Chevrolet Traverse jack
Answer:	This has a 3/4" socket so it will work with any 3/4" hex drive jack.
Question:	If I cut it off, will it fit in a 1/2 inch drill
Answer:	Really don't know; are you talking about just the hex socket, or are you talking about cutting off the shank (so the shank fits a 1/2 inch drill?) Don't think the diameter of the shaft will fit a 1/2 inch drill (Trailer is in RV storage, so I can't measure the diameter of the shaft.) Personally, I use my impact driver with a long extension and a 3/4' socket to loosen the jacks, then I use this to tool to crank the jack to the retracted position. To extend the jacks, I use this to crank the jacks down, then I use my impact driver for final leveling. (The pin that holds that socket on the cranking bar broke after I tried to wrench up the second jack; it just won't handle the torque applied when it's cranking under a heavy load.)