13 best zeny trailer jacks

• Solid steel construction in a red and black powder coated finish
• Two variable screw adapters
• Simple crank operation
• 12 cm removable crank handle
• Fits Cruisers, Choppers, Can Am Spyder, Trikes, Sport Bikes

User questions & answers

Question:	I see there are machined holes on the top platform. Can these be accessed from underneath to bolt a board on top? I'd like to use this to lift an an
Answer:	There isn't as much padding as you may be used to for side crunches.
Question:	will this jack fit my 1998 dyna wideglide? the kick stand is in middle under the frame. It is not up front on the frame by the shifter
Answer:	Hello, thank you for asking! you don't need to lay down all the way back when doing crunches, lay back until you feel pressure on your abdominal muscles and then pull forward to complete the exercise.
Question:	How will it do lifting my 09 street glide
Answer:	hello, side crunches is not for this unit.
Question:	Can you turn the black "saddles" around? Seems like they would need to go 90 degrees from the photos for frame rails
Answer:	No

Product description

Reese Towpower A-frame Jack is designed to provide excellent facility for mounting or dismounting heavy weight. It features reposition capacity and includes a weld-on mounting bracket.

• Designed to provide excellent facility for mounting or dismounting heavy weight
• Includes a weld-on mounting bracket
• 2000 lb. capacity

User questions & answers

Question:	Is the Jack foot plate removable to get the tube through the trailer tongue
Answer:	Inside curve - eye=2 1/2 " center - short end = 1 1/2 " center - long end = 8"
Question:	On the mid-center 3 bolt triangular piece, does anyone know the measurement from the center of each bolt hole to bolt hole? Mine are 5 inches apart
Answer:	The video features the 5" x 14"
Question:	How high is the lift of this jack? That is to say, what is the difference between the fully extended and fully retracted lengths
Answer:	I don’t believe they would work. You have to tie them through something. We have ours tied taunt through the mesh medal work on the swim deck of our houseboat.
Question:	What is the diameter of the fixed lower barrel
Answer:	the top of the bumper might be too short to hang over your tubes nicely. Unless you can hang it over just right... might fit oddly.

• 【Durable and Sturdy Structure】-- Safety and security is of the utmost importance. Our ZENY pet playpen constructed from sturdy heavy duty rust resistant metal makes the playpen firm and hard to be damaged by small pets. These solid latches and stakes secure your pet inside so they dont get out. Building a safe place for pets to play and rest, keep them away from the outdoor danger from messing the room up.
• 【Change Multiple Shapes Easily 】-- Our 8 panels puppy playpen design allows for multiple shapes configurations witout any tools to meet your needs, such as the shape of rectangle, square or octagon. Durable puppy playpen great for indoor or outdoor use.
• 【Large Space for Your Pets】-- 31.5"W x 39"H of each panel. This interactive and expandable pet playpen for small pets provides large enclosed area for pets, ensuring that they have enough room for play and exercise. Our puppy playpen keeps your pets safe from others and the sides of dog playpen are tall enough for a small child to reach into the enclosure.
• 【Fold Down Design】-- Our puppy playpen easy to set up and no tools required. Once you’re done, the pet playpen quickly collapses for convenient storage and easy to carry. Our dog playpen fold down design makes it ideal for travel and camping.
• 【Great for Small to Medium Pets】-- ZENY exercise pen works great as a dog playpen or as an exercise area for non-climbing small to medium animals including rabbits, ducks, turtles & guinea pigs and some other small animals. Keep pets safe and provide large space for them to run.

User questions & answers

Question:	Can you buy extra panlels
Answer:	I’m sure they have the technology but why don’t you just put a stainless steel snap ring on the end of your rope or replace your rope.
Question:	Did anyone successfully return their fence and get their money back? Did you have to pay for shipping
Answer:	I would imagine on the Amazon Site or Ebay.
Question:	How is it on uneven ground - we have a hill in our backyard
Answer:	Yes, I managed to pass a soft braided rope by tightly twisting it to reduce the diameter. Tight but it worked, I doubt if you could pass a twisted polypropylene rope.
Question:	Why did they not set this up in a real area and put real dogs inside there? It makes it feel like a scam
Answer:	I have used both 3/8" &1/2" twisted polypropylene rope successfully.

Product features

ZENY Foldable Metal Pet Playpen 8 Panels Protable Puppy Exercise Pen Dog Fence for Indoor or Outdoor Use

This ZENY heavy duty pet fence is made of durable iron metal, last for long time use. Exercise pen works great as a puppy playpen or as an exercise area for non-climbing small animals including Rabbits, Ducks, Turtles & Guinea Pigs and so on. 8 pen panels create an big area for pets to play. Great for indoor or outdoor use. It is easy to set up with no tools required. You can set it up in a rectangle, square or octagon shape to meet your needs.

5 Shape Configurations to Meet Your Needs

Weather Resistant Design

Durable iron metal and its sleek black finish provide rustproof performance and protection against outdoor elements, offering long-lasting strength, which is sturdy and durable enough for your long-time use. ZENY pet fence providing a comfortable and safe exercise pen perfect for safely restricting your furry friends especially for outdoor use.

Metal Stakes Added Secure

Safety and security is of the utmost importance. These heavy duty latches and stakes secure your pet in the exact place to ensure safety. Besides, its round edges keep your pet safe and away from scratching or injured.

Double Latch Door Access

ZENY pet playpen features a swing-open door for easy access for you and your pet. The door comes partly raised off the ground so it won’t catch on grass or uneven surfaces when opening and closing. Once inside, two slide-bolt latches ensure secure closure.

Folds Flat for Convenient Storage

ZENY 8 panels pet playpen is very easy to store & transport. Because each panel is independent, it is an easy task to remove or add pieces to fit the space you have available. Even combine on or more to make a larger playpen!

Not Just for Dogs

ZENY Exercise Pens are not only use for dog but also great for containing rabbits, ducks, guinea pigs, and other adult non-climbing animals. Can be used for a variety of pets weighting up to 25 pounds.

Not Just for Indoors

ZENY Portable Exercise Pen is great for indoor & outdoor use. Not only for indoors.

It can be used as a kennel, crate, pet hangout, playroom, or even as a designated time out zone, your pet can all have fun in this fence!

Product description

Nobody wants their boat or utility trailer rolling off into the sunset. With the Fulton Bulldog A Frame Trailer Jack, your receiver style trailer will stay grounded when it's not in use. With a 5,000 pound lifting capacity, this A frame jack can be used for a variety of agricultural and commercial applications. This jack is designed with a gray finish on both the inner and outer tubes. It also comes with a sidewind handle and all necessary mounting hardware for installation. Whatever receiver style trailer you own, put your mind at ease with a jack that keeps your trailer put when not in use.

• Dependable A frame jack is ASABE compliant and perfect for agricultural and commercial applications
• Reliable vertical and side load capacity
• Bulldog jacks have been known to be the most reliable, field proven jacks
• Specifications:
• Handle style: Sidewind

User questions & answers

Question:	I looking for a 5000lbs jack for my 1994 trailer: the up hole is 2 1/4 inch, and lower hole is 2 inch. it's this jack fit my tailer
Answer:	Yes and the built quality is better.
Question:	How long is the handle
Answer:	I got my Scissor Lift within 3 weeks of ordering it
Question:	is there a wheel sold for this jack
Answer:	These are the spects on the one I have.Jet DSLT-770Ship Weight 235.0 lbs Load Capacity (lbs.) 770 Raised Height (in.) 51 1/8 Lowered Height (in.) 13 9/16 Platform Size L x W (in.) 35 5/8 x 20 1/8 Overall Dimensions L x W x H (in. (mm)) 45 3/4 x 20 1/8 x 39 Color White
Question:	I would assume that the gearing of a jack rated for 5000 pounds is different from a 2000 pound jack. Am I correct
Answer:	No. The bottom part of the base is angled and the lever to raise the platform sticks down below the base. If you took the wheels off you would have to build some type of legs, or platform for it to sit on.

Product description

Nobody wants their boat or utility trailer rolling off into the sunset. With the Fulton Bulldog A Frame Trailer Jack, your receiver style trailer will stay grounded when it's not in use. With a 3,000 pound lifting capacity, this A frame jack can be used for a variety of agricultural and commercial applications. This jack is designed with a gray finish on both the inner and outer tubes. It also comes with a top wind handle and all necessary mounting hardware for installation. Whatever receiver style trailer you own, put your mind at ease with a jack that keeps your trailer put when not in use.

• 3,000 lb support capacity
• 13" travel, 20" extended, 7 inches retracted.
• 2.25" outer tube diameter, 2" inner tube diameter
• The High Strength Mounting Bracket Provides Easy Bolt-On or Weld-On Installation.
• Outer tube diameter 2.25 inches - 2 inch inner tube diameter

User questions & answers

Question:	What country is this made in
Answer:	mo clue...but assume ASSEMBLED in USA from multiple countries' parts
Question:	Will this work with a travel trailer that weights 8,000 pounds
Answer:	This jack is rated for 3000 pounds tongue weight. Check the tongue weight of your trailer to determine if this jack will work.
Question:	What is the distance from mounting plate bottom to bottom of 2.25 in outer tube
Answer:	6 inches
Question:	How long from plate to top of jack
Answer:	The clearance is 14-1/2"

• This mini compact twin tub washing machine is easy to set up and use,Modern design constructed from durable plastic,This compact mini twin tub washing machine is perfect for those with a need to multi-task, save space and may want to save themselves a trip to the expensive laundromat
• This mini washing machine has a washing capacity of 5.5lb and spin dry capacity of 4.4lb. Small but powerful, can clean the clothes quite well. Wash T-shirts, trousers, socks easily. Perfect for dorms apartments condos motor RV’s camping and small room, bring you much convenience in your life
• Design with washer tub and spinner tub, washer control timer runs for up to 15 minutes while the spin cycle timer runs for up to 5 minutes each load, you can spin and wash at the same time, much more freedom and options as opposed to standard washing machines that have preprogrammed settings
• Lightweight portable design makes it easily moveable to move it to anywhere you want , ideal for camping trips or dormitories. Quiet and no viobration feature adds more attaraction to have it to make life easier and efficient
• This is a gravity drain requires it to be elevated off the floor/surface & near a drain outlet to work properly.Features a drainage tube which allows you to easily drain out dirty water

User questions & answers

Question:	Does this item have a Prop 65 warning label
Answer:	I am not sure. I have only used the non keratin color. (i did just buy the keratin color which says that " 80% less breakage" and that "keratin complex system cares and protects before and after coloring") The original coloring I used was the Velvet brown, which was darker than my starting color. It did dry my hair out more than other brands. The positive was that the color and time the color lasted was amazing. This Keratin color has a tube of "pre treatment" in the box that I am guessing you apply to the dry ends of your hair before you color. This might be better choice for bleached or over processed hair. I will probably try out the Keratin Color at the end of this month. Will you be darkening your hair or keeping it light? i felt that with the Velvet brown, the color deposited darker than expected. I cannot say for the other colors. The Keratin color i will try is a shade lighter, called Berry Brown. I will see if it also deposits color a it darker than expected and post my comments.
Question:	How long is the electrical cord
Answer:	Our hair coloring products does not contain PPD. You can find the ingredients on Material Safety Data Sheet. Please use this link - http://mymsds.henkel.com/mymsds/DS.do?bu=UK&internet=true. If you are unable to find the information needed, please feel free to contact us from 9 am to 6 pm ET at 800-350-3998.
Question:	Can it be powered by batteries
Answer:	Schwarzkopf Color Ultime Permanent Hair Color Extreme Lightener will lighten your hair, but it also depends on the color of your natural hair. Our team of Licensed Professional Colorists are available Monday -Friday from 9 AM -6 PM ET at 800-234-4672 if you would like to call for a free consultation.
Question:	I’m disabled so can’t put in the tub. can i use on kitchen counter by sink? can i put 2large sz dresses in
Answer:	Gradually...its going to take some time. I was jet black when i started..it took 6 months to get it to the color it it now. And i cant stress enough about pre conditioning your hair. I use coconut and olive oil from Sally's. It protects your hair while bleaching. I only wash my hair 2-3 times a week. Condition every single day. I rotate between hair masks and Kera color clenditioner in platitum. I use Schwarzkopf Gliss hair repair shampoo and conditioner when i wash. You will need a purple shampoo for brassiness. Being a red head..you will have orange looking hair to start...i wore a hat for a bit. Then i only do roots evry six weeks. I wait til its at least 1/3 inch roots. You do not want to give yourself a chemical haircut. And use a satin or silk pillowcase. It protects the hair from breaking. Your hair will be fragile...but if you take care of it..it will be gorgeously blonde. Good luck

Product features

ZENY Portable Clothes Washing Machine

It's very troublesome to wash clothes every day. If you live in a limited space, can't place a standard washer-dryer machine. Our ZENY portable compact washing machine is your choice. This compact small washer and spin-dry clothes machine not take up much space, the small size and light weight design makes it easy to store in a closet ot just under a counter. It can clean up to 5.5 lbs of laundry and spin-dry up to 4.4 lbs. And the twin tubes can operate either separately ot at the same time. Super operation with wash timer /wash modes/ spin timer to select. Great for small apartment, dorm, RV travelling. No worry about dirty towels, clothes, shirt, socks, this small washer will clean them up. ZENY mini laundry washer machine will make your life easy.

• Oveall Size: 22 x 14.7 x 22.6 inch (LxWxH)
• Weight: 22 lbs
• Wash Capacity: 5.5 lbs, Spin dry Capacity: 4.4 lbs
• Drain Pipe Length: 19.7 inch
• Inlet Pipe Length: 6.56 ft

Make Your Life Easier

Twin tube design, one tube for washing, one tube for spinning dry. Transparent cover allows you to observe the washing process at any time.

Easy Operation

• Wash Timer: 5 levels wash time to choose(3/6/9/12/15 minutes)
• Wash Modes: 3 models for washing clothes(standard/drain/soft),choose the right model according to your own laundry needs.
• Spin Timer: Seclect the appropriate spinning time according to your needs(0-5 minutes)

Spin Cover

The spin cover in the spin dry tube will prevent clothes from spinning out while spinning. Please make the clothes as flat as possible to to reduce the shaking during spinning.

Product description

The Ultimate Trailer Jack was designed for the ultimate in convenience, speed, and simplicity. Just pull the easy-to-access release pin to drop the entire jack tube down for quick adjustments. Even better, there is no longer any need for space fillers with this jack, so put away the drop leg, blocks, and bricks! With this jack, setting up your trailer at your destination has never been breezier. The jack features an outer tube that extends to provide extra lift. Pulling the release pin, and dropping the outer tube, gives you up to 12” of lift, ensuring a solid foundation with the ground. And then the easy grip topwind handle allows for an additional 15.5” of travel by cranking the jack. Keep setting your worries aside with the Ultimate Trailer Jack, because its compact profile keeps the jack flush with the trailer frame when its retracted. You no longer have to worry about catching your jack on uneven terrain while you tow. The Ultimate Trailer Jack is easy-to-use, quick, and dependable. If you’re looking to spend less time setting up your trailer and more time doing the things that make you happy, then the Ultimate Trailer Jack is for you. Features: - Quick release locking pin allows for faster operation - Interior roller bearings for product performance, easier cranking power and jack longevity - Lift capacity: 2,000 lbs - Support capacity: 3,000 lbs - Zinc coated for maximum corrosion resistance - 7 Height settings allow for fast, easy positioning - No blocks or drop leg needed - Lower the jack from the mounting bracket to get up to 12" of lift - Manually crank the jack to achieve up to an additional 15-1/2" of travel

• QUICK-RELEASE: The easy-to-access locking pin releases jack tube down for much faster operation than conventional jacks
• 28” LIFT: No drop legs or extra blocks needed underneath to gain extra height
• HEAVY DUTY CAPACITY: 2,000lbs lift capacity and 3,000lbs support capacity
• TOPWIND HANDLE: Low-friction mobility allowing for simple cranking

User questions & answers

Question:	Can you get spare parts? Such as the pin, the part you remove to allow jack to go down, and the handle
Answer:	You’ll receive exercise guide eBook in your email or check your amazon message centre for eBook link
Question:	how much room is needed for top crank? I have a v-nose trailer
Answer:	These ropes are actually very light weight. I use them daily and I would say that as long as you wrap them up neatly they are pretty easy to store and carry
Question:	Is the handle removable? so as to be shortened for trailer clearance
Answer:	The anti-tangle rope is easily adjustable up to 3m in length, according to your individual needs.
Question:	Can i remove the jack from the mount and stire it fir trip and drop back in once i arrive at my destination
Answer:	You could probably tie this to secure it to the dock. It is an inflatable cushion - so using nails or screws is not possible.

Product description

In our goal of being your best source for all things towing, the CURT line of trailer jacks is designed with care and manufactured with pride. CURT jacks are made with quality to promote the life and function of your trailer, and they come in several different styles to accommodate your needs, whether you are a frequenter of the boat landing, the campground, the racetrack or the farm. CURT square jacks are a heavy-duty trailer jack option. They are designed to weld directly onto the frame of your trailer for superior holding strength. This CURT direct weld square jack features a lift capacity of 10,000 lbs., a support capacity of 12,000 lbs. and a travel of 12-1/2". With a jack foot plate attached to the bottom, this type of jack also provides added stability for your trailer on rough terrain. It comes with a side-wind handle and is an excellent choice to meet the high demands of the farming life and construction industry. It does not matter what kind of trailer you tow -- a boat trailer, utility trailer, livestock hauler or recreational vehicle trailer -- if you have a receiver-style trailer, you will want a jack that complements its function. For a trailer jack that will not steer your trailer wrong, CURT has the answer.

• HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 12,000 pounds trailer tongue weight (10,000 pounds lift capacity)
• VERTICAL RANGE. This trailer tongue jack allows for 12-3/8 inches of vertical movement and can be fully retracted for towing (28-inch retracted height, 40-1/4-inch extended height)
• EASY OPERATION. This heavy-duty trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler
• CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish
• SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included)

User questions & answers

Question:	does it have a return spring on the foot
Answer:	Lowest 18 3/16 highest 28 1/2
Question:	Can the lower leg be unscrewed and turned and rescrewed to place the pull pin on the side
Answer:	its like almost a foot tall maybe 11 inches
Question:	can i install 2 of those jacks to work simultaneously on my equipment trailer. Also where do i get the car in the middle that connects the 2 jacks
Answer:	/Duration 0:11Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:11 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } You just unscrew the bottom of the handle, separate the two white pieces, and then you can adjust the inner piece to a lower point on the rope! Hope this helps!
Question:	Do these have a high and low gear
Answer:	The length is around 3 meters, it is long enough for tall one. You can adjust the length by the provided hex key.

Product features

CURT Trailer Jacks

A CURT trailer jack provides your trailer with a dependable, functional support to fully equip you for the job or adventure ahead. We offer several different styles of trailer jacks, including boat trailer jacks, A-frame trailer jacks, swivel trailer jacks and heavy-duty trailer jacks.

Having the right trailer tongue jack on your trailer can make all the difference. CURT offers the diversity of options and weight capacities to suit any towing setup.

Boat trailer jack

CURT boat trailer jacks are built to thrive under water exposure, equipping your boat trailer with a dependable support for miles to come. These trailer jacks also feature a jack wheel to give the boat trailer enhanced mobility when coupling to your vehicle or launching your boat at the boat landing.

A-frame trailer jack

A-frame trailer jacks are uniquely designed for an A-frame trailer. They feature a triangular bracket to be bolted onto the trailer tongue or welded into place. While A-frame trailer jacks do not swivel up and out of the way for travel, each is equipped with excellent vertical adjustment for easy coupling and safe towing.

Swivel trailer jack

The CURT swivel trailer jack features an integrated swivel bracket that allows the entire jack leg to tilt up and out of the way after hitching your trailer to your vehicle. CURT offers bracket-mount swivel trailer jacks and tube-mount or pipe-mount swivel trailer jacks to accommodate a variety of trailers.

Heavy-duty trailer jack

For large trailers, heavy loads and commercial jobs, a CURT heavy-duty trailer jack supplies superior lift and support capacity. We offer heavy-duty trailer jacks with support weight ratings up to 12,000 pounds. Each CURT heavy-duty trailer jack is also covered in a durable powder coat finish for maximum corrosion resistance on tough jobs.

Enhanced mobility

Each CURT marine boat trailer jack is equipped with a trailer jack wheel at the base, giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue. This makes parking easier, coupling easier and launching and positioning your boat easier.

Water-resistant

These trailer boat jacks are constructed from high-strength steel for dependable strength and are shielded in a durable zinc plating. This tough finish is optimal for water exposure, frequent at the boat landing, ensuring long-lasting corrosion resistance of the trailer jack support leg and internal components.

Safe towing

For increased safety while towing and ease of use, all CURT boat trailer jacks mount with a swivel bracket. This allows the boat jack to swivel up and out of the way for travel, providing plenty of ground clearance for your trailer tongue. The swivel design also makes setup quicker and easier with less raising of the trailer jack leg required.

Product description

• Featured slim design to save space
• Stroke 20% faster but powerful and quiet!
• Bright LED light for night operation
• 55" long power cord
• 5 steps adjustable & removable 8" drop leg
• 5.5" extra large foot plate provide more stable support
• Rain water drain holes on foot plate
• One-piece motor cover and rain proof buttons
• Powder coated rust resistant outer tube in a black finish
• Zinc plated rust resistant inner tube
• Stainless steel screws/bolts outside motor cover never rust!
• Emergency detachable hand crank included
• Mounting hardware included
• Rain proof head cover included, a $10 value!
• 14" stroke travel lifting
• 3500lbs lifting capacity
• Fits 2-1/4" standard A frame trailer coupler mounting holes
• Mounting hardware included
• 12V operation
• Bracket height: 9-1/2" retracted, 31-1/2" extracted (w/drop leg fully extracted)

• Featured slim desgin, Stroke 20% faster but powerful and quiet.
• Bright LED light for night operation; Emergency detachable hand crank included,mounting hardware inlcuded! Waterproof head cover included!
• One-Piece motor cover preventing rain damge, Stainless steel screws/bolts outside motor cover never rust! Powder coated outer tube
• 8" 5-step adjustable drop leg; Over size 5.5" diameter foot plate, more stable support, rain water drain holes on foot plate.
• 14" lifting capacity; 3500lbs lifting capacity; 12V operation, 55" power cord

User questions & answers

Question:	how much room do you need for hand crank? I have a v nose trailer
Answer:	I don't understand the question but it mounts in the same bolt pattern as most common jacks including Atwood.
Question:	what experence have you had with this power jack? Does it have to have a cover to protect it from elements
Answer:	Yes it does come wit a manual crank handle
Question:	Will this work on a 3" hole pattern? It states 2 1/4" but looks to be slotted making it adjustable
Answer:	This product simply replaces the manual lift. Just unbolt the old and bolt on the new in the same mounting holes. The wiring can be done two different ways. You can mount a 12v battery to the trailer and get power from that. I chose to get my power from the vehicle that I am pulling the trailer with. It did require replacing the lifts factory plug. This is not hard to do. The new plug will come with a wiring diagram that shows you where each colored wire gets attached. The plug will have a open spot for constant 12v power. That's the location for the lift. You need to look at the vehicles plug to confirm that the constant 12v location is connected. If it isn't you can simply cut a short piece of wire and jump from the hot wire to the constant 12v location. It's not hard to do, you just have to concentrate on what your doing.
Question:	i have a jack-it bike rack on the front of my camper. the distance from the mounting plate to the top of the cover cannot exceed 21.5". will it work
Answer:	To the person that asked this question, did you purchase this jack? If so, did it fit under your front bed?

Product description

When it's time to transport your boat, RV, or anything else from point A to point B, make sure that you have a jack that can meet your needs like the Reese Pro Series 8,000 Lb Square Jack. From trailers and vehicles to boats and RVs, this jack can do a little bit of everything. With a 5,000-pound lift capacity and an 8,000-pound support capacity, this thing is the real deal. The handle features a sidewind claw design that makes it easier than other designs to raise and lower the load. This jack is also built to weld directly to the frame, ensuring a snug fit everytime. Go with a jack that can stand up to your demands, like this one from Reese.

• PRO SERIES JACK: Square jack design with sidewind provides superior side-loading
• DURABLE: Durable and long-lasting steel construction
• FEATURES: Features a black powder coat finish that helps avoid rust and corrosion; Sidewind handle has a smooth, ergonomic design for easy cranking; Drop leg helps increase overall extension for maximum adjustability;
• MOUNTABLE: Direct-weld design for easy access; Integrated footplate base
• SPECIFICATIONS: Bracket height: 25.12 inches (retracted) and 53.68 inches (extended); Total lift: 28.68 inches; Travel: 15 inches; Drop leg: 13.68 inches; Life capacity: 5,000 pounds; Static capacity: 8,000 pounds; Handle radius: 7.12 inches; Footplate dimensions (L x W): 8 x 6 inches; Product warranty: 1-year warranty

User questions & answers

Question:	Is the handle removable
Answer:	The one I have is not if you take the top off you will haft to take the gear loose to get handle out not something I would do.
Question:	is this a bolt on or weld on jack
Answer:	Weld on. If bolt-on is an option, it didn't come with the hardware and I don't see how it would be possible. But I know it's heavy enough to weld.
Question:	Is this jack designed to swivel into the horizontal position when traveling, or do you have to remove it
Answer:	No, it doesn't swivel. The jack gets mounted permanently, high enough to be out of the way then the bottom "foot" has a pin you pull and it drops down to the ground. I like it much more than the swivel type,.
Question:	anyone know what the retracted height is and then how many inches it can crank up
Answer:	Retracted Height depends on where you weld it. You can drop the foot down 1 to 1 1/2 feet I believe then crank up almost the same. Love it though. Very Heavy duty

• Durable Construction-- ABS shell for durability and sturdiness, ergonomic design, anti-static and anti-overload device, load capacity up to 220 lb, LED display to show time, speed and fat at the same time
• Adjustable Vibration Speed--Speed can be adjusted from 1 to 99, with 99 having the maximum intensity to suit different needs, remote easily controls the speed at the click of a button, and 10 minutes on this vibration platform equals 1 hour of jogging
• Whole-Body Vibration-- By far the most popular new addition to the passive exercise category is whole-body vibration also known as Power Plate vibration plate vibration platform vibration machine
• Quiet operation-- It works very quiet, will not disturb you from watching TV shows, and comes with two detachable resistance bands to work out your arms and upper body; a manual to guide you through the appropriate process to achieve the ultimate results
• Balance Exercise Equipment-- Booty machine workout fitness platform that will just make your body look perfect benefits include increased circulation, muscle strength, and flexibility; better range of motion; core conditioning and stability; and faster muscle recovery after working out. They say the health benefits also include enhanced metabolism, increased bone mineral density, reduction of the stress elevation levels

User questions & answers

Question:	I have a Zeny, and the manual says it has a max capacity of 100 kg (220 lbs), while the write-up says 330 lbs. What is correct
Answer:	It’s 220 lbs
Question:	Porque el dibujo de Bluetooth no tiene musica
Answer:	No se, trate de conectar mi telefono y no lo conseguí
Question:	What's the warranty for this product
Answer:	1 year warranty
Question:	How much does the unit weigh
Answer:	I don't know...25 pounds maybe? The booklet doesn't say how much it weighs. But I am 60 years old, and I was able to carry it into my house, get it out of the box/packing material, and carry it across the room to the spot I wanted it, and place it on the floor with minimal effort. Hope that helps.

Product features

Whole Body Workout Fitness Vibration Platform for Home Training and Body Shaping Toning with Bluetooth & Resistance bands

If you sit most of the day or work in an office for a long time, you need to move your body to make your blood circulation smooth and your muscles relaxed.This is our ZENY brand new vibration platform machine.You can exercise without leaving house or even office.After just a few minutes on the machine,strengthen your core and relax whole body muscles.This ZENY upgraded vibration board features anti-slip surface,LCD display digital control,Bluetooth function.You can listen to your favorite music while exercising, making the fitness atmosphere more relaxed.The resistance bands make it possible to get in a great workout or stretch.In addition,portable handle under the base make it more convenient to move the board from living room to bedroom.With 99 levels of intensity the fitness vibration plate is ideal for beginners.Helps with reducing weight, Improves flexibility, Increases bone mineral density, Increases balance & co-ordination, Relieves back pain by decompressing the spine. Add this shaky board to your exercise routine.Shake your body now.

99 Levels + Remote Control + Bluetooth

Speed Range: 99 Levels,you have various choices.Use the remote control to adjust the time and intensity without bending.Play your favorite music via Bluetooth.

Antiskid Foot Pads + Ripple Pedal Surface

Ripple shape pedal,increased the antiskid force on the surface.4 anti-skid foot pads keep the board stable during oscillation.

Resistance Bands

Fitness tools 2 Resistance Bands great addition to any gym.Use resistance bands according to your own exercise programmes to achieve better fitness effect.

Burn Fat,Enhance Toning & Shaping to Get Beautiful Body

Product description

The bROK 1,000-lbs marine jack is the perfect replacement jack for your marine craft. It's zinc and chrome plating are ideally suited for the marine environment and the swivel mounting plate quickly allows the jack to swing up for storage or down for use. For added mobility, this jack includes 6” poly wheel that glides easily and lowers the friction to help you move a trailer into position with minimal effort. The side-winding handle allows for fast and smooth usage while a heavy-duty swivel mechanism and pull-pin release make it easy to access the device when you need it and store it away when you don’t. bROK premium Towing and Trailering products are fostered by American engineering and ingenuity to provide you with the means of success in your challenging travels. bROK's highly engineered products give you the confidence needed to take on tough, demanding challenges. Whether cross county or across the farm, bROK brings powerful reliability and trustworthiness from the professional who demand performance. bROK is a partner with you, traveling with you and succeeding with you.

• 1,000 lb capacity
• Smooth, efficient side wind rotation for ease of operation
• Ergonomic swivel handle for maximum comfort
• Heavy-duty retaining ring swivel plate with spring locking pin
• Smooth rolling 6 inch Poly wheel

User questions & answers

Question:	What are the dimensions of the mounting bracket plate? I have a space along the tongue rail of about 5.25 inches where the plate can fit
Answer:	How is the minimum lift 6-5/8" if the height of the jack is 7-1/3rd?
Question:	I have an existing jack whose plate is welded to the trailer frame. What is the size of the pivoting hole in case I can reuse my existing plate
Answer:	Torin Big Red Steel Jacks are made in China.
Question:	The instructions say to insert spacer into the wheel, but mine didnt come with a spacer. Do you need a spacer for the wheel
Answer:	Yes, a higher tonnage jack stand will be more stable and in many cases provide a higher lift range. At the same time you need to know the minimum lift height the vehicles you're working on will need but this is more a matter of the jack not the stand. Any decent jack will lift high enough for a 3 ton stand unless it's an odd spot on a lifted (SUV or truck) vehicle. I would say go for the 3 ton for a regular sized car or small crossover. Remember that 3 ton capacity is a rating for the PAIR of stands, not per stand.

Product features

bROK AT ITS CORE

bROK premium Towing and Trailering products are fostered by American engineering and ingenuity to provide you with the means to success in your challenging travels. bROK's highly engineered products give you the confidence needed to take on tough, demanding challenges. Whether cross-country or across the farm, bROK brings powerful reliability and trustworthiness for the professional who demands performance. bROK is a partner on your journey; from hook-up to successful arrival.

Product description

Maxxtow trailer and farm jacks are perfect for all your recreational, marine and farming applications. Heavy duty zinc plate or powder coat finish insures durability against the elements.

• Capacity: 1500 pounds
• Wind: side
• Swing back dual wheel
• Mounting Bracket Size - 6-1/2 wide x 5-1/2 inch tall

User questions & answers

Question:	Can this be welded on
Answer:	Thanks for asking Brianna. Yes the 02925 Eagle Level comes in a pack of two. If you have more questions about this of any other Hopkins product please call out Product Support team at 1-800-835-0129.
Question:	What is the height in it's shortened position and when fully extended
Answer:	Packaging indicates that it was made by Hopkins Mfg Corporation in Emporia, Kansas.
Question:	Why did the price jump 10$ for cyber Monday
Answer:	I wish it was, I had to use tape as well
Question:	Would I be able to attach one of these on each side of a watercraft trailer to jack up the trailer off the trailer tires instead of using jack stands
Answer:	Yes. Mine came with a cap that slips over the clear part to protect it from the sun. Works great in AZ.

Product features

MaxxHaul 70149 - Swing Back Trailer Jack With Dual Wheels

Constructed from heavy duty 1/8" rolled steel frame.

Has a lift range of 11-1/2" with convenient side handle.

Easily mounts to your rectangular or square shape trailer tongue.

Easily mounts to up to 3" x 5" rectangular or square shaped trailer tongue

Folds up when not in use and always ready when needed

Spring loaded lock pin