Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.

Product description

"

FEATURE

* The Lepy LP-2024A+ uses the Class-T Tripath TA2024 Audio Amplifier IC for low distortion, acoustically accurate reproduction of music. Ideal for both home and car audio applications.

* Tone/Direct switching allows for customized listening via separate Bass and Treble adjustment or original audio source signal can be passed through without enhancement.

* Built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect speakers from high volume bursts of audio.

* Over-voltage protection circuit shuts down amplifier should input voltage exceed 14.4 Volts DC.

* State of the art design using surface mount components and advanced engineering for proven performance, reduced signal interference, and long operational life.

* Mini size easy to installation by DIY without manual, especially good fit for car, motorcycle, bike, boat, every where!

* Support AUX stereo audio Input, Can be plug in with CD, DVD, PC, MP3 / MP4, digital music player.



SPECIFICATION

* Output power: 20W x 2 RMS

* Input power: DC12-13.5V>3A

* Impedance: 4-8 ohm

* Frequency response: 20 Hz - 20 KHz

* Minimum THD:

* SNR: >80dB

* Input Sensitivity: 200mV

* Input impedance: 47k ohm

* Surround Sound Channel Configuration: 2

* Color: Black & silver

* Product Dimensions: 14 x 11.8 x 3.1 cm

* Weight: 0.55Kg "

• LP-2024A+Using T-type digital technology output power£º20Wx2 RMS.
• Tone/Direct switching allows for customized listening via separate Bass and Treble adjustment or original audio source signal can be passed through without enhancement.
• Tone/Direct switching allows for customized listening via separate Bass and Treble adjustment or original audio source signal can be passed through without enhancement.
• With power supply supervisory circuit When voltage is higher than DC14.4 V it van be protected by itself.
• Compact size makes this amplifier great for projects and DIY audio applications

User questions & answers

Question:	Can i connect to a sony flat screen tv? i have audio out receptacles in the back
Answer:	Hi Joel, Im not really sure but that doesnt sound good. My amp is working perfectly for years now. I dont have the green light on the Power, but I have the Blue around the Volume. If it is under warranty, I would send it back. Personally, I would buy a new one due to the price and reliability.
Question:	Can the power adaptor be plugged into 220V outlet
Answer:	Hi Allen. I have the 2020 amp for over 2 years now and it is very capable of running 2 X 4 foot tower speakers with ease. Super sound from a small package. Volume is tremendous. Quality is superb. I don't know how they do it so well. I'm thrilled with the little amp. It packs a punch for its size. Hope this helps a bit. You won't be disappointed whatsoever.
Question:	The blue light around the volume knob and the green light on the power supply are both blinking and I get no sound. What's wrong
Answer:	I used a box cutter to cut around my emblems then a good pair of scissors to fine tune my cuts
Question:	Hi, for those of you who've had the chance to compare: with respect to sound quality and to power would you say the 2020A+ is better than the 2024A
Answer:	No

Product description

Here’s an exciting way to enjoy all your favorite music. The Mustang LP is a 4-in-1 music center with exciting retro automotive styling that recalls the great road cruising’ music of yesteryear. Everything you need is here: A quiet belt-drive 3-speed turntable plays every record in your collection and records them to a USB flash drive. The unit has built-in speakers and an internal amplifier so you don’t need any extra equipment. There’s an Auxiliary input for connecting other devices and even a headphone jack for private listening. But what really sets Mustang LP apart from the crowd is its FM tuning dial that looks just like the speedometer of the classic 1965 Mustang, right down to being flanked by round dials on either side. This unit delivers great music with unbeatable style. Just be careful not to exceed the speed limit!

• 4-in-1 retro music center with turntable, radio, USB and aux input
• 3-speed belt-drive turntable plays all your records
• Records your albums onto USB flash drive
• Sensitive FM tuner with speedometer look
• Built-in speakers and headphone jack for private listening; Auxiliary input for connecting and playing other devices

User questions & answers

Question:	Can you plug external speakers to this turntable
Answer:	No
Question:	Does this use 110V plug
Answer:	ION support here! The Mustang LP runs on 110V. If you have any other questions, please feel free to call or email us using the contact information on ionaudio.com/support.
Question:	It says it record albums. Can it record 45 rpm singles
Answer:	Dear Michael PerilloThank you for your inquiry.Product Name: ION Audio Mustang LP | 4-in-1 Classic Car Styled Music Center with Built-In Speakers (Black)This turntable can play / record 45 revolutions single record.※ The instruction manual is in Japanese.※ The power supply is AC100V (50 / 60Hz) / power consumption is 14W. (For Japan specification)Below is a site URL of Multilingual Zone Riki Start Guide (PDF).※ There are some differences in the product drawing (back panel) described.http://www.ionaudio.com/downloads/MustangLP-QuickstartGuide-v1.2.pdf
Question:	Why is the black version so much more than the red version. $125 for red to $425 for black? Any difference other than color
Answer:	ION support here! The black version was not originally sold in the US so all of the current sellers of the black version are selling and shipping them from overseas. I hope this helps, and if you have any questions, please feel free to email me directly at [email protected].

• 2 x AUX INPUT - Convenient connection to any device that has a 3.5mm headphone output or dual RCA output. Connect to two devices via AUX at the same time, no plugging and switching needed. (None Bluetooth version)
• STUDIO SOUND QUALITY - Natural sound reproduction from 13mm silk dome tweeter and 4 inch full range unit
• REMOTE CONTROL - Adjust volume at your figure tips. Bass and treble control located on the side of main speaker.
• CLASSIC WOOD FINISH - High quality MDF wood build finished with wood effect vinyl serves as a great compliment to any home decor.
• 2 YEAR WARRANTY - Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.

User questions & answers

Question:	Are these speakers bluetooth
Answer:	i threw mine in the trash it never worked right.
Question:	Will they work well as TV/home theater speakers
Answer:	about 3 hours
Question:	Does the front plate come off
Answer:	Accurate
Question:	How is the bass with these speakers? Most of my music wouldn't require much, but I do like the occasional gangster rap album
Answer:	the one I have woks on tractor trailers and good for over dimensional loads. I use it every load does a good job

Product features

Reliable Performance

The R1280T powered bookshelf speakers has combined a retro look with a modern sense of audio quality. If you’re looking for affordable and versatile bookshelf speakers with uncompromising sound the R1280T bookshelf speakers is your go-to 2.0 speaker system. Featuring a 4-inch bass driver and a calibrated, flared bass reflex port, this bookshelf speaker system delivers robust, rich bass notes that are full of presence and depth. The faithful sound production and performance of the R1280T are any audiophiles dream. Most Edifier customers are using our R1280T powered bookshelf speakers for connecting their turntables for the best audio experience. Enjoy your classic vinyl’s while enjoying the advancements in modern day audio technology.

Precise Control

Personalize your listening experience with the bass, treble and volume dials on the active bookshelf speaker. The quality sound produced form these bookshelf speakers deliver a precise booming midrange that tantalizes any reviewer. A compact sized handy remote control is included. You can adjust the volume and set the speakers to mute when needed without having to reach the speakers; power and perfection at your fingertips. The Edifier R1280T comes with built-in tone control at the side of the active speaker. Depending on the preference, you can make micro adjustments of treble and bass from -6 to +6 db. Digital volume control is automatically set to a comfortable level every time the speakers are powered on.

Dual RCA Input

R1280T powered bookshelf speakers lets you connect to multiple audio devices using the dual RCA inputs. By looking at the back panel you can easily tell one of these is a passive speaker and one is an active speaker. The active speaker has two inputs located on the back. These inputs are perfect for RCA to RCA or RCA to AUX connections. Connect them to a PC, laptop, tablet, phone or record player. The speakers are connected to each other via regular speaker wire. The variety of cables included ensures our customer enjoy their music from most devices right out of the box.

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

Note: Batteries are NOT included



Features:

Best Compatibility: An essential accessory for the Canon digital camera, compatible LP-E6 battery with original item, efficient, environmentally, energy-saving

Includes USB output to charge Smartphones, Tablets, and other USB Powered Devices

Intelligent Protection System: Quick charge with automatic constant current control prevents battery from overcharging, short circuit, and electronic shock, over discharge, over-temperature, over current, over voltage protection functions such as stable performance, safe and reliable

Charges two batteries simultaneously (Batteries are NOT included)



Specification:

Type: Dual Charger

Color: Black

Model: DC-LCDQ

Input: AC 100V-240V 50/60Hz; DC 12-24V 3000mA(MIN)

Output Voltage: DC 8.4V/12.6V/16.8V

Output Current: L 1000mA*1 500mA*2; H 1500mA*1 800mA*2

USB Output: 5V 2100mA

Material: Plastic



Package Contents:

1* Dual Charger for LP-E6

1* US Plug

1* EU Plug

1* Car Charger Adapter

• Neewer dual battery charger for Canon LP-E6 battery
• Suit for Canon 7D 6D 5D II III 5Ds R 70D 60D 6D a 80D
• Smart LED displays each battery's charging status. Come with 3 Plug(US plug + EU plug + Car charger adapter)
• Charges two batteries simultaneously
• Note: Batteries are NOT included

User questions & answers

Question:	Just to clarify, this charges Li-ion batteries, correct
Answer:	I've had no issues charging LP-E6n and LP-E6nH
Question:	What do the settings "H and L" mean
Answer:	Two dead batteries usually takes about an hour and an hour to an hour and a half if I'm not mistaken I've been very impressed by this unit it is fabulous in every way shape and form
Question:	Does this neewer charger charge oem canon lp-e6n (note the n) batteries without any damage, or negative impact to their life or use in canon 5d mk iv
Answer:	you can use your TV as a source, but you will need the cable (depending on you TV model). Then connect your external speakers to the amplifier.
Question:	How long will it take to charge 2 batteries from 0% to full? Last charger I bought took 5 hours and only to 80% of capacity
Answer:	The DC volt is 12. I'm not sure whether this thing supports a 220v input.

Product description

Jack Plate - Creme Plastic

• Authentic Gibson Replacement Part
• Crème Plastic
• Made in USA

User questions & answers

Question:	this will work with a guitar gibson les paul standard
Answer:	1 & 3/8 inches square
Question:	with which guitars is compatible
Answer:	Correct, It's for Li-ion batteries.
Question:	what is your measurement of length and width
Answer:	It means high which is quicker in charging. And Low which is slower charging

Product description

Pro lift T-6903D is a 3-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 3 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Fit type: Universal Fit

User questions & answers

Question:	Where can I buy just the locking pin
Answer:	Max 16 1/2 min 11 inches
Question:	what is the extended maximum height
Answer:	It mounts to the Smittybilt Pivot hinge, so it will clear most aftermarket bumpers as long as they don’t have an integrated tire carrier.
Question:	Does it come with 2 or just one jack
Answer:	No
Question:	What are the max and min lift dimensions
Answer:	I use an insulator for the handle but the mount is very secure and makes little to no noise compared to my old one.

Product features

Pro-Lift Double Pin Jack Stands - 3 Ton

Features:

• Sturdy stamped steel construction
• High quality cast ductile iron ratchet bar
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm and shop use

• 90 WATT POWER: The Pyle Dual Channel HiFi Audio Amplifier gives your entertainment or PA system a boost! Offers low distortion & acoustically accurate audio reproduction. Supports speakers w/ 2-8 ohm impedance allows you to enjoy high-quality audio
• CUSTOMIZABLE SOUND: It features tone & direct switch which allows adjustment of how much bass & treble get through to be amplified. By switching to direct the filters are removed from circuit & the signal coming in is amplified w/o any filtering
• SUPPORTS MULTIPLE DEVICES:The professional class-T amp support various external devices. Connect android phone, iPhone, iPod & MP3 to the 3.5mm jack input & enjoy surround acoustic audio w/ the speaker. It also has microphone & AUX input for karaoke
• EQ CONTROLS: This multi-purpose portable 2-channel compact home digital stereo receiver box features crisp buttons & rotary knob controls for audio adjustment. It also features a blue LED illuminated volume knob which also serves as a power indicator
• BUILT-IN SAFETY FEATURES: Equipped w/ shortcut, overload & overheat protection to keep this amp & connected devices functioning properly & safely. The built-in loudspeaker protection circuit protects your speakers from high volume bursts of audio
• WORRY-FREE SHOPPING: With the Pyle PFA300 updated version, we are confident of the quality of our product, therefore, we offer a 30-day money-back guarantee, no questions asked

Product description

Lanzar Model : HTG237

1000 Watt 2 Channel Mosfet Amplifier

2 x 125W RMS @ 4 OHMS

2 x 500W Max @ 4 OHMS

1 x 1000W Max @ 4 OHMS Bridged

2 x 225W RMS @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

Bridgeable at 4 Ohms

2 Ohm Stereo Stable

Nickle RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

High Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Channel Separation: >65dB

Freq. Response: 10Hz~45KHz

HPF Freq. Response: 80KHz

LPF Freq. Response: 50Hz-250Hz

Subwoofer Level Control

Fuse: 25A x 1

Dimensions: 9.84''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

User questions & answers

Question:	Would this particular amp b ideal for 2 6.5s and 2 4x6s
Answer:	I highly doubt youll get 400w out of this amp let alone what it clams. I recommend an apcl15001d if you want real power for cheap. This isnt worth it
Question:	will this be good for 2 12 mtx termenior 400 rms
Answer:	Seperate your amps for better sound comtrol the four channel will run your coaxial speaker and run your tweeters then run a mono block single sub amp
Question:	Is this amp enough for 2 12 kicker cvr
Answer:	Yes, a direct replacement.
Question:	hi, i am looking an amplifier to conect 2 coaxials speakers, two tweeters and a subwoofer ¿how many channels should the amp have
Answer:	Most all of the USA Gibson Les Paul lineup.

Product description

Pro lift F-2315PE hydraulic trolley jack has the 3000 lbs. capacity. It gives you the ability to lift from 5.25" to 12". it is built with All welded steel frame construction and rust-resistant. Large steel casters and swivel casters provide easy maneuverability.

• Min. Height: 5.25", Max. Height: 12"
• All welded Steel frame Construction with rust resistant
• Large Steel casters and swivel casters for easy maneuverability
• Sturdy carrying handle
• Blow mold case for easy storage

User questions & answers

Question:	Is it good for a 2016 lexus is 200t fsport
Answer:	This is a small jack that is good for something the size of a Camry. I did use it once on a Toyota Prado Land Cruiser with blocks of wood and it struggled. It is not commercial quality. and
Question:	Is this good for a 2012 chrysler
Answer:	good for any car with the clearance. always check your manufacturer owners manual for auto jack lift points. many cars use unibody construction and serious damage can occur if jack placed incorrectly.
Question:	Is it good for changing tire on riding lawnmower
Answer:	Don’t buy it... i did and it works only two times 👎
Question:	Is it good to use on a 2003 subaru outback wagon
Answer:	It’s garbage. Don’t waste your money. Spend a little more and get something that you can trust. Mine failed the first time trying to lift a compact car.

Product features

Pro-LifT

Our lifting equipment products have consistently led the industry in quality and innovation. Designed after professional grade equipment standards, Pro-Lift equipment is kept under close quality control standards from factory to your home. Our products provide a unique twist to your garage maintenance needs.

Product description

The Arcan ALJS3 3-Ton Steel Jack Stands has an overall 3-Ton lifting capacity and a working range of 11-5/8 in. to 17.5 in. A counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments. A large contoured saddle with locating lugs helps support and position vehicle frame. The wide stance base delivers superior stability and includes base pads that prevents the jack from sinking into asphalt and provide stable footing for the jack stands. The welded construction and alloyed steel offer years of support. Arcan puts all of our lifting equipment through voluntary and rigorous third party safety testing, as outlined by the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, to ensure that our products are among the safest on the market.

• COLORS MAY VARY: ALJ3T (silver) or A20018 (green)
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	how smoothly and slow can a vehicle be lowered
Answer:	This fuel pressure reghulator is set at 43 PSI - identical to the OEM regulator. -Sean 818-574-FUEL
Question:	What is the height range
Answer:	Yes, this will fit the 2013-2018 Can-Am Maverick / Maverick Max 1000 . -Sean 818-574-FUEL
Question:	How big is the saddle and rubber pad on this jack
Answer:	This will be a 100% direct fit for the 2009-2018 Outlander 650. -Sean 818-574-FUEL
Question:	where is arcan made
Answer:	Yes, this will be a 100% direct fit for the 2013-2015 Can-Am Maverick 1000. -Sean 818-574-FUEL

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use