11 best engine valve train tools

Product description

Engine Tool Valve Pressure Spring Remover Installer For BMW B38 B48 B58

• Engine Tool Valve Pressure Spring Remover Installer

Product description

Specification:

Material: Steel

Color: Black & Silver & Red

Size: Shown as Picture

Package Weight: Approx. 797g/28.1oz

Fitment: for most of OHV, OHC engines but not suitable for use on engines with deep seated valves



Package list:

1 * Valve Spring Compressor

• Main Application: The spring compressor design for use on a wide range of OHV, OHC engines but not suitable for use on engines with deep seated valves.
• Convenient to operate: This engines spring compressor is suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor.
• Professional manufacturing: Adjustable handle, claws and hooks allow use on most OHV engines. Professional cylinder head valve spring compressor, very easy to use.
• Adjustable valve removal installer tool: Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications.
• After sales service: Aramox is a professional seller. If you meet any trouble when you use our device, you can contact our customer service staff, They will provide you with solution in time.

Product description

OVERHEAD VALVE SPRING COMPRESSOR For use on a wide range of OHV, OHC, and CHV engines Not suitable for use on engines with deep seated valves Allows valve springs and valve stem oil seals to be replaced with the cylinger head Features a reversible jaw/adapter and automatic cam-action locking to a pre-determined setting

• Manufactured from high grade satin polished steel
• Over all length: 250mm/9.8 inches
• Jaws are chemically blackend to prevent corrosion
• Riveted design for durability
• Reversible jaw/adapter

Product description

Brand: Qiilu

Features:

• Perfect for remove and install the valve spring with the cylinder head on or off the OHV and OHC petrol or diesel engines, and remove the valve stem seals on overhead camshaft engines.
• Multi-point adjustable base of this tool bolts securely to the head while the adjustable lever mechanism pivots from the bar thus compressing the spring.
• Quick removal and installation of the spring retaining keepers are then easily accomplished through the large openings on both sides of the compression tube.
• Valve pliers can reach down around the valve stem into the confined areas of the seal to grip it for removal or installation.
• Precision machined seal driving adapters guide the seal for proper setting.
• Suitable for most foreign and domestic cars.

Specification:

• Material: Steel
• Color: Black & Silver & Red
• Storage Case Size: 60.5x26.5x8cm/23.8"x10.4"x3"
• Valve Stem Seal Pliers Length: 27cm/10.6"
• Round Rod Length: 55cm/21.6"
• Connection Hose Length: 35cm/13.7"
• L-Shaped Lever Size: 20x16cm/7.8"x6.3"
• 7-hole Holder Size: 14.5x10.5cm/5.7"x4.1"
• Other Parts Size: As Picture Show
• Package Weight: 5.3kg

Package List:

• 1 x Set Valve Spring Compressor Stem Seal Installer/Remover Tool
• 1 x Storage Case

Notes:

1. Please kindly check the product detail page before ordering to make sure this item is perfectly fit.

At Qiilu:

• We are a professional store producing high-quality Automotive Accessories, all items come with strict quality control;
• We care about every quality-related issue with a REPLACEMENT or REFUND;
• Please contact us at the first time if you got the defective item, we will reach out to you to your within 24 hours.

• 【Applications】This professional Valve Spring Compressor is perfect for remove and install the valve spring with the cylinder head on or off the OHV and OHC petrol or diesel engines, and remove the valve stem seals on overhead camshaft engines, suitable for most foreign and domestic cars
• 【Function】Quick removal and installation of the spring retaining keepers are then easily accomplished through the large openings on both sides of the compression tube. Valve pliers can reach down around the valve stem into the confined areas of the seal to grip it for removal or installation
• 【High Performance】It allows the removal of stem oil seals squarely and without damage to the springs. Precision machined seal driving adapters guide the seal for proper setting
• 【Tool Box Storage】This professional service tool kit comes with complete parts you needed. All tools are manufactured from quality steel for strength and durability and neatly packed in a sturdy case for easy transport
• 【Fast & Free Shipping from US】US warehouse - Directly shipping and fast delivery; Quality Guaranteed - We have strong comfidence for our products; Provide friendly customer service, solve your questions in time

Product description

Description:



A valve spring compressor is specially designed to help remove and install valve spring conveniently. Our high quality valve spring compressor can remove valve spring quickly without removing cylinder head. There is dial adjustment for fast and accurate setup, offset jaws can easily grip and compress valve springs. What's more, it is made of solid carbon steel and zinc & black oxide finish, very durable in use and rust resistant. What are you waiting for?











Specification:



Material: Carbon steel



Color: Black & Sliver



Size: Approx. 14.5 x 7.5cm/5.7" x 3"



Package Weight: Approx. 429g



Fitment: Universal fit for most of cars and light trucks.







Package Included:



1 x Valve Spring Compressor







Note:



Please allow 1-3cm error due to manual measurement. Thanks for your understanding!

• Suitable for quick removal of the valve spring without disassembling the cylinder head.
• With a reasonable structure and ingenious process, the offset jaws easily clamp and compress the valve springs.
• Dial adjustments enable fast, accurate settings.
• Rugged carbon steel with zinc and black oxidation for good load carrying capacity and rust resistance.
• The universal design is suitable for most cars and light trucks.

Product description

Car-Tools is a professional car repair tools seller that owns factories, laboratory and Technical staff.

Any problem or need, Contact us!

WELCOME!

• Made from high quality steel frame in silver color.
• Designed to compress valve spring on overhead valve spring.
• Contains two valve spring adapters to fit spring retainer 25mm 30mm.
• Auto lock with 36-142mm jaw opening. Throat clearance 150mm.
• SHIPPING-IT will be shipped within 24h, delivery in 7-12 days. Contact us if any problems.

User questions & answers

Question:	Is this made in America
Answer:	Depending how much tummy control you are looking for. It does have more tummy control than your typical legging or bike short. I had a csection so these worked wonders for that tighter support but not too tight where it’ll hurt.
Question:	does it come with a palstic storage box or something like that
Answer:	Mine weren’t tight fitting and I wasn’t in the son and my husband was able to tell me what color my underwear was. Thankfully he told me before I left the house.

Product description

🛠About Thorstone Valve Spring Compressor Kit

This Valve Spring Compressor Tool Kit avoids damage to other parts caused by the traditional hammering disassembly method

Help you to disassemble and install different parts easily & quickly

Greatly shorten the maintenance time, improve work efficiency, and reduce the occurrence of maintenance accidents



🚘Compatible with

Including motorcycles, ATVs, cars, and other small engines



🚘Simple Operation

Close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring.

Carefully compress the spring for removal or install and only release compression when the spring is set for install.

Handle with caution.



Set include

- 5x metal collets (16mm, 19mm, 23mm, 25mm, 30mm)

- 3x extension screws: 4.4'', 4.4'', 3''

- 1x spring compressor C-clamp with a max jaw opening of 9-1/2 inches

- 1x compression bar

• 🚖Valve Removal&Installation: designed to conveniently install/remove the valve on most cylinder heads by compressing the valve.
• 🚖Compatible with most Vehicles&Motocycles: with multi-size pushers which are suitable for various spring diameters on most cars, ATV, UTV,motocycles & other small engines vehicles.
• 🚖Upgraded 'C' clamp Jaw: strong and durable. Using 1.7mm thick Heat Treated steel with black oxide treatment,not easy to bend and deform while compressing. And the two end of the 'C' Clamp are aligned in a standard straight line,Not easy to slip during use.
• 🚖Convenient Storage:This set comes with a heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
• 🚖After-sales service：If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.

User questions & answers

Question:	How wide 7s this tool? Will it work on a 2002 volvo v70 xc
Answer:	I think it might be too short. Order it and you can always return it if necessary.
Question:	Will this work on a 2000 Honda 400ex atv head
Answer:	I did not find it true to size at all. I normally wear a small shirt or size 6-8 pants. I bought the suit for my daughter, I ordered an XXL. It fit me pretty perfectly, it was obvious it would not fit my daughter. I would highly recommend going by the size chart. It is a very pretty and flattering swimsuit and the quality was nice. Just be careful with the sizing.
Question:	Will this work for a Harley Davidson
Answer:	I would say a medium it runs somewhat small
Question:	Will it work for a 85 honda rebel cmx250c
Answer:	It sure can work as postpartum wear. I would use them for this purpose if I needed to. It holds my tummy in very nicely.

Product features

Valve C Clamp Spring Compressor Kit

Package Includes:

1 x Spring Compressor "C" Clamp

5 x Adaptors

3 x Extension Screws

1 x Compression Bar

Complete 10 pcs parts are well packed and assorted in a plastic box for convenient storage and carry.Color of box may vary

Professional valve spring compressor tool is used on domestic foreign autos and motorcycle engines

Five Adaptors

• Five sizes for different usage:
• 30mm (OD.) --27.5mm (ID.),
• 25mm --23.5mm,
• 23mm --21.5mm,
• 19mm---16.5mm,
• 16mm --13.5mm

Pusher

• Extension Screws Size: 11.3cm/4.4", 11.3cm/4.4", 7cm/2.7"C
• ompression Bar Size: 10cm/3.9"

C Clamp

• "C" Clamp Size: 16 x 19cm/6.3" x 7.5"

Product description

Fit Engine

compatible with BMW MINI N12, N16,N18;

compatible with Peugeot 207, 308, EP6 Engine.



Package Include:

1X valve pressure spring remover;

1X valve pressure spring installer;

1X valve slider holding pliers;

1X suitcase.

• APPLICATION ENGINE: Compatible with BMW MINI N12, N16, N18; for Peugeot 207, 308, EP6 Engine. Replace BM number119571 119572 119573
• FUNCTION: Specially designed to remove and install the pressure spring on intermediate lever. and the valve slider holding pliers could easy to install the valve slider
• ACCURATE : Our valve pressure spring remover and installer have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine
• MORE CONVENIENCE : This kit include valve pressure spring remover/ installer , and valve slider holding pliers, three tools put in a suitcase, the case design easy to store and carry
• QUALITY GUARANTE : Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. and we offer lifetime warranty, let you order without worr

Product description

Specification:



Engine connection port: Spark plug hole M14 and M12;



compressed air inlet: 1/4" quick coupler male plug;



Trachea length: 10in.



Package include: 1PCS tool.

• Main Usage 1: Pressurizes the cylinder to help hold valves closed with compressed air. So The oil seal of the valve can be replaced without dismantling;
• Main Usage 2: When the cylinder is in the compression stroke. If the air tightness of the engine is not good enough, you can hear the continuous leakage of air. Diagnosis of damaged parts by listening to the leak position;
• Compatibility: Suitable for the gasoline engine with M14 or M12 spark plug. The joint of this tool must be installed on the position of the spark plug;
• Working requirements: Compressed air (working pressure 30psi≤P≤110psi), Air inlet: 1/4" quick coupler male plug;
• Widely use: It can be used for gasoline engine, such as car, truck, boat, motorcycle, ATV, etc. Not to be used in diesel engine vehicle.

User questions & answers

Question:	Will this work on a 2001 buick
Answer:	Full height, including the spike, is 42.5", according to the description. I'd guess that the height above ground when installed is about 28-30" tall, assuming the spike to be 10-12" long. I haven't used this to hold hose, so I'm not giving it a rigorous workout, but it's stayed stable since I installed it and doesn't wobble.
Question:	Will this work on a Predator 212 engine
Answer:	Large will fit you better because of breast size

Product description

A valve spring compressor is specially designed to help remove and install valve spring conveniently. Our professional overhead valve spring compressor allows valve springs and valve stem oil seals to be replaced with the cylinder head. There are reversible jaw adaptor and automatic cam action locking to a pre-determined setting. What's more, with adjustable depth can fit for most large and small spring applications. It is suitable for most OHV, OHC, CVH engines. Performance and quality guaranteed! What are you waiting for?

Specifications:

Material: Steel

Color: Black & Silver

Overall Size: 23.5 x 13cm/9.3" x 5.1"

Package Weight: Approx. 800g

Fitment: for most of OHV, OHC and CVH engines but not suitable for use on engines with deep-seated valves

Package Included:

1 x Valve Spring Compressor

Note:

Please allow 1-3cm error due to manual measurement. Thanks for your understanding!

At VEPEN, we believe in our products. We provide our worry-free 24-Hour reply, 30-Day Refund and 24-Month warranty, and consistently friendly customer service.

( PS: VEPEN is a professional store producing high-quality Automotive Accessories, all items come with strict quality control. We believe our items and guarantee no risk shopping experience here for you. )

• Perfect for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring
• Allow valve springs and valve stem oil seals to be replaced with the cylinder head
• Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
• Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting
• For use on a wide range of OHV, OHC and CVH engines but not suitable for use on engines with deep seated valves

• APPLICATION: Engineered and manufactured specifically for the repair environment, compatible with Ford 2003-2010 Powerstroke 6.0L.
• FUNCTION: Replaces OE# 303-761. The Front Crank Wear Sleeve Installer Kit install the delicate wear sleeve to the correct depth without any damage.
• ADVANTAGE: Radiator, fan and shroud removal is not required. It is nearly impossible to perform without an installation tool, this tool allows to perform a 3 hour job in 1 hour!
• MATERIAL: Made of high standard quality steel and rubber material resisting impact, crack and deformation with strong toughness and durability.
• GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this tool kit, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.

Product features

Front Crank Wear Sleeve Driver/Installer Kit Tool with Sleeve & Seal

Fitment:

Fit for 2003-2010 Ford Powerstroke 6.0L

Replacement:

Motorcraft/OTC 303-761

Material:

High quality steel and rubber with durable

How to Use 6.0L Powerstroke Front Crank Wear Sleeve Driver/Installer Kit Tool with Sleeve & Seal

1. Begin by breaking loose the four front crankshaft dampener bolts. Then remove the belt. (The belt just needs to be slid off the upper idler pulley to allow enough slack to remove the crank pulley.) Finish removing the bolts and the front pulley. Fan, shroud, and radiator are shown removed for clarity, but removal is not required.
2. Remove the five 10mm bolts that attach the oil pump cover and crank seal.
3. With the cover removed, clean the oil from the area around the pump.
4. Tape the area as shown with wide masking tape to prevent debris from getting into the pump gears.
5. Use a small cut off wheel to carefully cut through the old wear sleeve (if present) and remove the sleeve.
6. Clean the crankshaft - fine sandpaper may be required.
7. Install the new wear sleeve into the tool and coat the inside of the sleeve with a light layer of red Loctite.
8. Slide installer and sleeve onto crankshaft
9. Lightly tap installer with a hammer until it bottoms out.
10. Remove installer - your sleeve is now installed to the correct depth. Remove tape, clean surfaces thoroughly, and apply some engine oil to the pump gears. Install new seal into pump cover and complete reassembly.

Installer-Front

Installer-Back

Sleeve

Seal