13 best scanner cars

• TURN OFF CHECK ENGINE LIGHT: Autel MS309 OBDII scanner is an easy-to-use plug-n-play check engine code reader that read and clear codes. This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT color screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light).
• FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This MS309 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc.
• READINESS STATUS TO PASS SMOG CHECK: The Autel MS309 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annual smog check.
• UNMATCHED COMPATIBILITY: Autel MS309 compact pocket code reader supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. This OBD2 code scanner is compatible with all OBDII-Compliant vehicles, passenger cars or light trucks, post 1996 in US, post 2000 for EU-based and Asian cars.
• RETRIEVE VEHICLE INFO: The Autel MS309 automotive OBD2 scanner enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car when you are buying a used car. The MS309 auto car scanner comes with LIFETIME FREE software updates and is backed by 45 Day Money Back and 12 Months US Seller . Purchase now and go fix something!

User questions & answers

Question:	will this work on my 2000 Toyota Prado dieselwith 1KZ engine
Answer:	Hi there, I am with BAFX Products. Sadly it will not read any ABS/SRS?VSC or any other codes. The only codes it is able to read are those which cause your vehicles "check engine" light to illuminate. Any other lights require more specialized tools for reading. Best regards, BAFX Products
Question:	Will this work on a Nissan X trail T
Answer:	yes, I'm using Windows Phone 8 on Nokia 920 with OBDAutoDoctor application. You need to connect the PIC18F2480 via Bluetooth, before starting an OBD2 scan tool application. On Windows Phone 8 only a few OBD2 app are available. OBDAutoDoctor is free but get only some information from the car. I just found how to unlock the pro version...It's a in-app purchase...click "..." at the bottom of the app to upgrade. The Pro version is available for $7.99.
Question:	i used this tool and all is said was manufacturer control. no code number with it? what does that mean? 1998 ford explorer sport
Answer:	Hi Christopher - I am with BAFX Products Support.In MOST vehicles you will be ok leaving the adapter plugged in as long as the vehicle is driven every few days. However we make the following recommendations:1) Do not leave the adapter plugged in if it will not be driven for 24-48 hours2) If your area is to be experiencing extreme cold unplug the adapter as the combination of cold and the adapter will drain it faster3) If your battery is more than a 1-2 years old you will want to be very careful about leaving it plugged in, older batteries do not hold the same juice as the newer ones4) If you have an electronics heavy vehicle such as BMWs tend to be we do not recommend leaving it plugged in as the vehicles electronics do not always fully power down either5) If you have any other device plugged into the vehicle while it is off via cigarette ports or whatever we then also recommend removing the adapterI hope that these tips and information are found helpful. If you have any further questions you may always reach out to us through the Amazon messaging system at any time!Best regards,BAFX Products Support
Question:	Can you use this to diagnosis why check engine light is on and figure out why car wont start? even of car wont start
Answer:	I can confirm that this adapter WILL read (I haven't tried to clear yet) ABS codes on Ford (2001 Ranger 4.0L), using FordSysFree or MotorDataOBD Free (both Android). ABS codes are in the Cxxxx range. Mine picked up, correctly, C0034 - Front Right Wheel Speed Sensor Failure. While other adapters may be able to read these codes with other Android Apps, this ELM327 BAFX adapter does capture ABS codes for Ford. That is the only one I can confirm. Yes, FORScan for PC should also pick up these codes with this adapter. I have not tested Torque PRO, but I don't believe it will read ABS codes with this adapter.

Product features

MaxiScan MS309

Quickly scan and define vehicle Diagnostic Trouble Codes (DTCs) with this easy-to-use, compact code reader with the ability to view Freeze Frame Data, check I/M Readiness (Emissions) and monitor status. The MS309 is a go-to tool for quick vehicle health status.

View Freeze Frame

The Autel MS309 auto code reader is most useful while diagnosing continuous monitor faults like engine misfire and fuel control concerns.

When an emissions related fault occurs, the OBD II system not only sets a code but also records a snapshot of the vehicle operating parameters to help in identifying the problem. This set of values is referred to as Freeze Frame Data and may include important engine parameters such as engine RPM, vehicle speed, mass airflow, engine load, fuel pressure, fuel trim value, engine coolant temperature, ignition timing advance, or closed loop status.

Smog Check

MS309 engine scanner code reader comes with I/M readiness status check function that shows you whether all the emission related systems and components are operating within allowable limits to help you pass the annual Smog Check.

The engine scanner shows readiness status with series of readiness monitors: continuous monitors like misfire, fuel system and comprehensive components monitor and non-continuous monitors like EGR system, O2 sensors, Catalyst, Evaporative System, O2 Sensor Heater, Secondary air, Heated Catalyst and A/C system.

DTC Definitions

Autel MS309 supprots DTC definitions. The definitons will be displayed bellow the codes. It provides you an easier way to read and a quick understanding of what's the meaning of the fault codes that was detected.No need to search online for what's the codes meaning.

Retrieve Vehicle Information

MS309 automotive scanner retrieves the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is especially useful while you take this little pocket OBD2 code reader with you while buying a used car to check whether the VIN matches and make sure the ECU has not been replaced with a garbage car.

Turn Off Check Engine Light & Erase Codes

Autel MS309 scanner not only read and clear normal codes, but also retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1), and pending codes

Vehicle Coverage

Autel MS309 car OBD2 scanner is Compatible with domestic, Asian and European vehicles, 1996 and newer. And the auto scanner supports all 5 OBDII protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN.

• Read and clear your Check Engine Light and all other vehicle systems. Get your unlimited free vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians
• As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
• Officially licensed and certified for Apple and Android devices
• The BlueDriver App and BlueDriver Sensor work exclusively with each other to ensure quality
• BlueDriver is the Professional OBD2 Diagnostic Scan Tool trusted by mechanics and developed by Professional Engineers in North America

User questions & answers

Question:	Will the device display "short term and long term" fuel trim data
Answer:	Thank you for your question. This tool will have free future updates, but cannot be guaranteed for life. This tool was just released less than a year ago so tool is already up to date. The next available update will be sometime next year. The updates will always be free.
Question:	Will is run a abs bleeder test
Answer:	Thank you for your question. The 3160RS never needs to be charged so no charging cable is required. The 3160RS and all of our code readers link to a vehicle through that vehicle's 10-15 amp accessory fuses. If any of the vehicles accessory fuses are blown, tool will not link to vehicle. Batteries for this tool are not needed as well. Batteries are optional and are only used to pair tool to Bluetooth/Wifi without being linked to vehicle, and to look at stored information in tool if not connected to vehicle.
Question:	so the device is 100 and u have to buy more apps
Answer:	Thank you for your question. Yes, there is a light at the end of the DLC cable plug.
Question:	Do you only hook up to it when check engine is on or it stays plugged in
Answer:	Thank you for your question. The 3160RS will support TPMS, steering angle reset, EPB, ABS brake bleeding, transmission temperature, oil level, oil life, and brake pad life for most 1996 and newer vehicles. The 3160G doesn't offer any of these features. The 3160RS just came out less than a year ago and will have free, future updates. The 3160G has been out for almost 5 years now. The 3160RS uses are RS2 app which is only compatible with a smart phone or tablet. The 3160G uses our original RS software which is compatible on a computer, laptop, or smart phone.

Product features

The Right Fix. Always.

BlueDriver will match your vehicle's make, model, and trouble code to a specific fix from a database of millions of repairs. Your Repair Report will always contain fixes that have been verified by ASE Certified Technicians, so no more googling unreliable fixes that waste your time and money.

The BlueDriver Sensor, paired with the free BlueDriver App (iOS or Android), gives you a complete vehicle repair solution. No other scan tool or code reader offers this level of insight into how to fix your vehicle.

BlueDriver Offers More. Period.

BlueDriver reads (and clears) all the codes the other guys read and the ones they don't. BlueDriver's Enhanced Diagnostics give you complete access to information normally only accessible to professional mechanics on their most expensive scan tools.

What are ENHANCED diagnostics?

All vehicles with an OBD2 port are required to output basic information when the Check Engine Light comes on. However, a lot of important information (such as ABS, Airbag, Climate Control, etc.) is left behind by other scan tools and code readers. Only BlueDriver gives you the complete set of diagnostics on a wide range of manufacturers.

Get Enhanced Diagnostics On:

• ➤【CHECKING CAR ENGINE TOOL】 The OM126P Enhanced OBDII scanner can read and erase the trouble codes that can cause emission problems in your vehicle in seconds, turn off the MIL (check your car engine) and reset the monitor, build a DTC lookup library you can find the related code definitions to help you determine if your car needs repair, to save you time and money, and dramatically improve your car lifespan / performance.
• ➤【EASY TO OPERATE】The OM126P car diagnostic tool equiped with 2. 4" TFT 262K true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each menu options, the I/M Readiness hot key can check the state emissions readiness and drive cycle verification,Also, a wealth of car information is retrieved to find out all about your car without hassle for recording, car tracking, buying matched parts etc.
• ➤【WIDE RANGE DIAGNOSE】 Work on all after 1996 and newer vehicles models in the USA(OBD II&CAN) or other imported vehicles. Quickly read and erase the DTC on all OBD II protocols vehicles: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 and support for 10 languages: English, French, Spanish, German, Russian, Italian, Finnish, Portuguese, Polish, Dutch, which make it easy to use for people from different countries .
• ➤【POWERFUL FEATURES】 Built-in 14 special functions in 1 car reader, read and erase stored emission related codes, pending codes, and show code definitions, data steam, freeze frame, on-board monitoring, and show the vehicle information,I/M reading,review the recorded DTC,review & print report. Support O2 sensor and EVAP system test, let you initiate a leak test for the vehicle’s EVAP system, identify trouble shooting related to fuel efficiency and vehicle emissions.
• ➤【WORRY-FREE SERVICE】 Plug & Play, no battery or charger required;OM126P OBDII diagnostic scan tool supports a lifetime free software updating and Review & Print diagnostic reports from the Auto fix ,via connect to a computer via USB (for Windows 7/8/10 ONLY), and we offer one year warranty , if you cannot comfirm its compatility, please feel free to consult us.

Product features

Why is OM126P so popular among customers? What are the special functions about it?

1. I/M Reading is to test Misfire/Fuel system/Comprehensive component.

2. On-Board Monitor Test can be utilized to read and results of on-board diagnostic monitoring, testing for specific components/syestems.

3. EVAP System Test let you initiate a leak of test for the vehicle’s EVAP system.

4. O2 Sensor Test allows retrieval and viewing of O2 sensor monitor test result for the most recently performed test from the vehicle’s on-board computer.

5. Review the recorded DTC, read hard (memory) / pending (intermittent) and historic codes and show definitions.

6. View stream data and freeze Frame, see the live data by graph or chart.

7. Review & Print can save or print the diagnostic report as need.

8. Vehicle Info will display the information such as VIN(Vehicle Identification Number), CID(Calibration ID) and CVN(Calibration Verification Number).

9.2.4’’ colorful LCD screen OBD Scanner,perform the full engine diagnosis and data for your car.

10.Pull engine related Generic and Manufacture specific, and pending trouble codes.

11.Reads and displays live sensor readings in text or graphs forms, supports unique 4 parameters compare in real time.

12.The OM126P's diagnostic speed is 2-3 times faster than other obd2 scanner with newest optimization algorithm in industry

13.Supports 10 languages and wide compatible all 12V Vehicles from 1996 and newer.

View Data Stream

Supports all data stream for compression ignition vehicles, there are 3 types of data: View all item, Select item and View graphic items. Let you view all data stream items and the live waveform of all selected items.

Steady Performance CPU

With best advanced STM-32 main chip set, The AUTOPHIX OM126P car code reader has a high speed and steady performance, which could fast read within 2-3 seconds, and quickly determind the problem of the car engine, check the engine light and show the live data.

Colorful LCD Display

The OM126P OBDII scanner has a .2.4 TFT 262K true color, 320*240 QVAG LCD display which indicates test results more Clearly and vivid,features with user-friendly UI design. The menu function is clear and there are six menu function options to choose from.

Data Review

OM126P OBD2 code reader can help you review the recorded DTC, which can review DTC, delete DTC data and delete all DTC data. Storing diagnostic data report for review and print, bulit in a lookup library to search for the definitions of DTCs stored in the DTC library and for code breaker information.

OM126P Enhanced Professional Automotive OBD2 Scanner

1. Identifies the Powertrain information and shows current data available to the scan tool.
2. Displays Freeze Frame Data; Used to clear DTCs and Freeze Frame Data.
3. Display the type of powertrain or emission related DTCs stored by a 4 digit code identifying the faults.
4. Request Oxygen Sensor Monitoring Test Results.
5. Non-continuously Monitored Systems test results.
6. Request for DTCs (pending) from Continuously Monitored Systems after a single driving cycle has been performed to determine if repair has fixed problem.
7. This special Control Mode requests control of the on-board system, test, or component bi-directionally (where applicable).

• · 【Powerful Check Engine Light Diagnostics】Can read and diagnose your check engine light, understand the severity of the issue, and clear fault codes in a blink of an eye. More functions compared to other simple scanner like I/M Readiness, Battery Health Check, Freeze frame, O2 sensor test, On-Board Monitoring, Evap system test, Performance Test, Data Stream, and Diagnostic reports, Handy google search button, Built-in OBD II Fault code look-up library.
• 【Necessary Battery Tester】Have you ever noticed many other scanner tools without battery tester functionality, which costs you extra or more, However, AUTOPHIX 3210 can Check the health of your battery and voltage with a tap on your phone screen, so it is in great condition when you need it the most on a freezing winter day without opening the bonnet.
• 【 Key Point】Don't just read vehicle malfunction codes and give you code definitions, but more importantly informs you what the possible problems are with your vehicle, even if you know absolutely nothing about cars. We are here to help you know the car troubles and clear the error code for saving money, so the understandable fault code definition is important for you.
• 【 Works on your car and your Language】A necessary wireless/Bluetooth car diagnostic tool/fault code reader for today’s car owners, downloadable on both iPhone iOS, Ipad and Android and supporting major vehicle brands and models 1996 or newer. Works in English, German, Spanish, Finnish, French, Italian, Dutch, Portuguese and Chinese.
• 【Autophix --Repairing and Solution Consultant for your Car】Proudly designed in the USA by Professional Engineers. Tested in 50+ local car dealers in the United States before Mass production. Autophix only does car scanning. We are professional for your cars.

User questions & answers

Question:	Can this be shipped to the US? All the addresses i put in wont work
Answer:	Is your Amazon site in Canada? Change your store your shopping at to US . :)
Question:	Connected but no response while engine running
Answer:	The engine is not to be running.
Question:	Does this device tell the miles of the vehicle
Answer:	Sorry, the major function of this scanner is detecting engine system. It will not show miles of the vehicle.
Question:	i work with 2011 and newer f-350s and f-550s, will this show me ABS and wheel speed sensor data as well
Answer:	Hi, friend, thanks for your inquiry! The main function of this scanner is reading and clearing fault codes for engine codes. It will not show the ABS and wheel speed sensor data. So sorry for that we cannot provide useful information for you. If you have any questions, please contact us. Have a good day.

Product features

What does Autophix 3210 obd2 bluetooth scanner do?

Read codes&Erase codes : Quickly read the error code in 3 seconds and clear pending error code, help you save time and money to fix it yourself if possible.

Built-in OBD II Fault code look-up library : Instead of just giving you a cryptic description of what a trouble code means, we offer a lot more information on trouble codes

Evap system test: Prevent gasoline vapor evaporated from the fuel tank of the car from being discharged into the atmosphere

Data stream ：Display various vehicle real-time parameters

O2 sensor test ： Detect the oxygen content in the mixture.

Real Time Battery Voltage :Show the real-time voltage changes to monitor your battery health.

Live Data : Show each data source as a Graph, Gauge, or Digital Display ; Customize the colors ; Resize and place in any arrangement.

Important Vehicle Information : Vehicle specifications.

Freeze Frame : Get a snapshot of the vehicle when a Freeze Frame Code was stored.

I/M Readiness/Smog check : Determine if your vehicle is ready for an smog test.

Mode 6 : Advanced test results (like misfire counts) for On-Board Diagnostic System Monitors.

• 😀【Vehicle CEL Doctor】The obd2 scanner can quickly help you read DTCs (engine fault codes), locate bad O2 sensor, access to emissions readiness status, turn off check engine light(CEL) or MIL(Malfunction Indicator Lamp) , reset monitor, read enhanced data and retrieve VIN of your vehicle.
• 😀【Accuracy】Live data in both graph and text forms. Accurately read vehicle error codes for most Worldwide cars, SUVs, light truck and 12V diesels equipped with Obd2. Besides, the car scanner also shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom-specific data parameters.
• 😀【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Supports data logging and Printer compatible. Unique PATENTED design, clearly arranged keypad, 2.8" wide color screen with Life-Time Free software update and 1 year quality assurance, it deserves to own. Supported by EXCLUSIVE engineer and service team for product and service quality. (Please note currently the package does not include a CD. )
• 😀【Smog Check Helper】Read/Erase and I/M readiness hot keys make it easy to use this car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for smog test. The obdii scan tool also help catch intermittent problems and confirm repairs during a drive cycle, so that help you quickly determine the health of the car.
• 😀【Home Necessity】NT301 car scanner is open to global customers. No battery required, it is charged directly from the OBDII interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics. It is recommended as a necessity in your toolbox and one of the best gifts for father. (Quick Start Guide is included in the package.)

Product features

FOXWELL NT301 OBD2 SCANNER

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. However, most of them don't know they could make it off themselves with dozens of dollars - using NT301 obdii code scanner. This auto code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the Foxwell NT301 car diagnostic scan tool would save you much time and money. It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage. (Please note, UPDATE IS NOT NECESSARY before utilization, and NO NEED TO REGISTER on Foxwell website before update. The upgraded NT301 cable is long enough to use at the passenger seat. )

Product Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

(Beeping: means your NT301 has diagnosed faults codes in your car. If you do not wish to hear the noise, please enter Settings to set it.)

Full OBD Service Modes

The Foxwell NT301 OBD2 universal check engine light tool is made to easily read and erase engine codes. It is an enhanced OBD II and EOBD scanner that covers all obd2 protocols and all OBD diagnostic services, therefore it will work with virtually any vehicle equipped with obd2 and view more powertrain diagnostic data than other obd2 scan tool.

Specially Designed for Home Diagnostics

The code reader car diagnostic tool is specifically designed for car owners to identify problems with their vehicles before taking them to a mechanic. It is therefore ideal for use at home, and is very easy to use. Moreover, it will save lots of car maintenance costs for you. Simply plug it in and hit enter. It supports all OBD II functions, and will therefore work for all vehicles compatible with standard obdii protocols.

Enhanced OBD II functions

NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 engine code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Save Time and Money

Perform a complete diagnosis of your car anytime, anywhere with Foxwell NT301 check engine light diagnostic tool. It is designed for fast use so you can get the results you want in the shortest time with one-click hot keys for reading/clearing DTCs. It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars. You also avoid being pushed to buy parts that you do not need because you know exactly what is wrong with your vehicle.

To know if you are ready for a smog check, press I/M button(rubber) for 3 seconds.

User-friendly Design

Hand-held size, clearly arranged keypad, menu-driven navigation, hotkeys and 2.8'' color screen together make the engine tool extremely easy to use.

What live data can be read by this device?

How much data can be read depends on the vehicle, there are over 40 graphing live data (Download the Specification Sheet to get a whole list), to list some: FUELSYS(fuel system status), LOAD_PCT(Calculated load value),ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), O2SLOC(Location of Oxygen Sensors), O2B1S2(Oxygen sensor output voltage (B1-S2), SHRTFT(Short term fuel trim), OBDSUP(OBD requirements), MIL_DIST( Distance traveled while MIL activated), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc.

Optional Carrying Case

With this Foxwell NT301 protection carrying case, you can prevent it from being damaged whether you place it in a trunk, toolbox, or garage.

Can it be upgraded on MAC system?

Sorry, the NT301 scan tool can be updated on Windows systems only(including windows 10), please visit Foxwell official website and download NTWonder and update.

Will it read ABS/ airbag codes?

Sorry, NT301 obdii scanner is able to read and clear check engine information which is part of OBDII system, but it cannot work on non-OBDII systems(ABS/airbag/oil service light,ect.). While FOXWELL NT630 Plus can reset airbag/abs service light, FOXWELL NT614 Elite support transmission and can reset oil service light and EPB, and FOXWELL NT624 Elite can do a full-system diagnostics.

• [ENHANCED 4 SYSTEMS DIAGNOSIS] - Not only diagnose the engine system but also performs full detection on vehicle's other 3 main ECU systems (Transmission, ABS, Airbag(SRS)). Reads & erases fault codes, turns off warning lights, and reads live PCM datastream on these 4 systems.
• [FULL OBDII DIAGNOSIS] - Read/clear error codes, DTC look-up, do smog tests including I/M readiness, O2 sensor test, etc. will keep your mind from worrying about whether the data about emission exceeds the standard values. It also reads freeze frame data, does EVAP system test, retrieves vehicle info, and more.
• [ADVANCED DATASTREAM GRAPH] - Reads and displays live data stream in one graph for the 4 systems (Engine, AT, ABS, SRS), allows you to add 4 parameters in the meantime to show the live data, which is intended to help you quickly find potential problems of the vehicle.
• [WIDE VEHICLE COVERAGE] - Compatible with over 46 vehicle makers for a complete car diagnosis. Works on most from 1996 US-based, 2002 EU-based, 2005 Asian-based or newer OBD II & CAN domestic or import vehicles. Supports English, French, Spanish, German, Russian, Italian, Polish, and Portuguese.
• [USER-FRIENDLY DESIGN] - Equipped with an intuitive interface, 4-inch TFT color backlit large screen, 2 cutouts in the back for holding easily, strong rugged anti-slip rubber housing. Supports lifetime free update and print online via an update software tool downloaded from ANCEL website.

Product features

Live Datastream Graph Analysis

• The FX2000 scanner has the ability to read live data stream for Engine, Transmission, ABS, SRS(Airbag), and provide vehicle diagnostic reports. It shows live data of the vehicle sensors in text, also allows you to add 4 parameters you need to graph data stream, and focus on any suspicious or symptom-specific data parameters.
• This scan tool features a built-in "Help" icon that makes you get code definition or other operating guides fast when you find the icon on the screen and just press the upper left button on the device. And the DTC look-up helps you find possible fault causes quickly and efficiently. Graph visualization, data record & replay & print makes the whole diagnosis more professional and reliable.

Full OBD II modes for 2005 & newer vehicles

• Read and clear fault codes, turn-off malfunction indicator light (MIL)
• O2 sensor test to check fuel efficiency and vehicle emission
• Display freeze frame data and retrieve vehicle information(VIN, CIN, and CVN)
• EVAP test for fuel tank system (Carbon canister test)
• Read dynamic live datastream, able to store and playback
• Display I/M readiness status (Non-continuously monitored system test )
• Advanced On-board monitoring test
• Built-in DTC lookup library, read generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes, show definition
• Support lifetime free upgrade online via a PC

Only supports 4 engine modes for those vehicles produced before 2005

1. Read fault codes for the check engine light, both generic and manufacturer specific codes

2. Erase fault codes

3. Read live data stream

4. Retrieve vehicle information (VIN)

How to update the FX2000?

Update this scan tool via USB cable or TF card, here's the upgrade guide via USB cable following.

Step 1: Before starting the upgrade, please connect this device to a computer via the USB cable, and make the network connection stable. (It supports WIN XP, 7, 8, 10 operating systems.)

Step 2: Download the update software from ANCEL official website (refer to the manual) and install it on a PC.

Step 3: Open the software tool, select the connection mode “USB” and click “OK” to continue. The "Product Serial Number" will be read automatically, then hit “Device Upgrade”.

Step 4: Move to the register page, type your email address and Register Code will be read automatically, then hit “Submit”.

Step 5: Click “Select All” and click “Download” to start downloading.

Step 6: When the 2 progress bars reach 100%, the upgrade completes. Click “Quit” and disconnect the USB cable.

Please Note:

• If the screen freezes during the upgrade progress, please disconnect the USB cable, and try it again.
• Please download the upgrade guide named “Installation Manual [PDF]” in the “Technical Specification” part on the product description page.

How to check if the FX2000 has installed the latest software?

• Connect the FX2000 to a computer and open the update tool. If the local version is the same as the latest version, it has installed the latest version of the software.

What will you get?

• 1x FX2000 OBD2 Scanner, 1x OBD2 Cable, 1x USB Cable, 1x TF Card (16GB, it’s put into the device), 1x TF Card Adapter, 1x User Manual, 1x Update Guide

Product description

Car diagnostic scanner

OS601 is a cost-effective upgraded version of OBDII scanner for determining the cause of the Check Engine Light. Equips with a 2.4-inch color screen and shows live vehicle sensors data in text and graph format. Support all the 10 OBDII test modes, enhanced Mode 6, read&erase codes, code definitions and playback data from the car ECU. It enables you to inspect monitor before Smog check, and switch off the MIL.

How to get started?

Simply plug into the OBD2 port on your car and turn ignition on and you ready to go.

No matter where you are, let this gadget accompanies with you. Let you decide if it's something you can fix or need more advanced help. Save money and time.

Where's the OBDII interface?

It is often under the dash, or under a panel below the handbrake in the center console.

What is OBD-II?

On-board diagnostics (OBD) is an automotive term referring to a vehicle's self-diagnostic and reporting capability. Vehicles produced after 1996 use OBD-II, which is a standardized system that simplifies the process a whole lot. These vehicles all use a common diagnostic connector and a set of universal trouble codes. Though only emission-related codes and data are required to be transmitted through it according to U.S. legislation, most manufacturers have made the OBD-II Data Link Connector the main connector in the vehicle through which all systems are diagnosed and reprogrammed.

At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue.

Why I can't erase the fault code?

Once the monitors are reset, the MIL will either remain out because the DTC was corrected by the proper repair, or it will illuminate because it has again detected the problem.

• Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars (made in 2008 or later), and all OBD II/EOBD/CAN-compliant vehicles.
• Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing; turns off check engine light and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.
• Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc).
• Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN (Controller Area Network).
• No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. Supports multi-language display (English, German, Spanish, Dutch, Russian).

User questions & answers

Question:	Funciona para un Aveo
Answer:	No se
Question:	Why I can't erase the fault code
Answer:	Thank you for your question. At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue. A fault code which provide a jumping off point in the diagnostic process. Then probably the vehicle still has a an issue. Codes only erase if the problem is repaired.
Question:	How can update os601? when do i need to upgrade it
Answer:	Contact the seller for an upgrade package. The upgrade is free. Anytime
Question:	How do you upgrade the software once it is out of date
Answer:	Thank you for your question. In most cases, the upgrade is to fix bugs in the software. In general, a six-month upgrade is sufficient (Because the support for the OBD-II protocol is stable). For other situations of upgrade or diagnosis, you can collect the corresponding model information and send it to us to provide more services. 【How to upgrade?】Connect scan tool with PC through Mini B connector(5 pin) at the bottom of the machine, migrate the upgrade data into it. For more detailed information, please email us via the station and we will send you the upgrade file. May you have a nice day! Warm Regards, Juta Auto

• 😀【Check Engine Light】The obd2 scanner 6100P shows fault codes with DTC Severity and quickly reveals the cause of "Check Engine" light warnings(MIL). One-press hotkey to turn off check engine light after vehicle maintenance. Live data displays plenty of vehicle data present, such as engine coolant temperature, fuel injector pulse width(fuel trim), RPM, spark timing, etc.
• 😀【Battery & Alternator Test】The Innova obd2 scanner can be used to check the performance of the battery or alternator for your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues. (Please note currently the package does NOT include a pouch. )
• 😀【Oil Light Reset+Oil Level/Oil Life】The Oil Reset feature provides step-by-step reset procedures after an oil change for most 1996 and newer OBD2 vehicles. The free stepwise guide which 6100P scan tool provides as regards oil change reset and drive cycle procedures may be a major relieve for beginners. This abs srs code reader can also monitor your oil level and its service life.
• 😀【ABS & SRS】In addition to emission-related OBD II codes, the srs abs obd2 scanner works well on reading/erasing ABS and SRS codes for popular US Car Makes such as Ford, Chevy, Dodge, GM, etc. when the Traction light is constantly on. The ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
• 😀【Developed in US】Buy with Confidence. The car scanner empowers the home mechanics with its professional-level functionality but entry-level difficulty, for it is designed and developed in the US and supported by unmatched technical assistance from a staff of all ASE certified technicians. At the same time, it is also the perfect Valentine's Day Gift for your family and friends ;)

Product features

Innova 6100P Professional Scan Tool Meets your Higher Needs for Car Diagnostics and Maintenance!

CEL/ABS/SRS Diagnostics+Live Data+10 OBD2 Function+Battery & Alternator Tests+Oil Service Light Reset:

Besides the full 10 OBDII test modes listed, INNOVA 6100P has the capability of performing the following functions:

1. Engine System: Quickly reveal the cause of "Check Engine" light warnings on any 1996-2020 OBD2 car, light truck, SUV, and even Hybrids

2. Anti-Lock Braking System (ABS): By accessing to ABS system, and retrieving the fault codes, this INNOVA 6100P code scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

3. Supplemental Restraint System (Airbag): By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

4. Battery & Alternator tests: check the performance of a vehicle's charging system.

5. Oil Light Reset /Monitor Oil Level / Oil Life: Reset your oil maintenance light and view important maintenance information necessary for servicing your vehicle.

6. Live Data and Data Logging: See essential information about your vehicle in real-time to aid in diagnosis and you can also save them for later analysis.

7. RepairSolutions2 App: Get verified fixes, the exact part required for repair, maintenance schedules, technical service bulletins, recalls, and more.

8. Vehicle System Test(O2 Sensor/Evap Test): Innova 6100p obd2 scanner vehicle code reader has the ability to run a complete OBD monitor test. Some might even argue that this car computer reader is a full-blown vehicle “doctor”.

9. Drive Cycle Procedures : Innova 6100P emission readiness show you incompleted obd2 monitors in red, but also provides a stepwise guide on how to fix incomplete monitors which it has previously discovered, namely how to perform drive cycle procedures.

ABS

By accessing to ABS system, and retrieving the fault codes, this INNOVA 6100P code scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off, This can diagnoses ABS system codes work on most US vehicles after1996.

SRS

By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag, This can diagnoses SRS system codes work on most US vehicles after1996.

Battery &Alternator Test

Innova 6100P Innova OBDII scanner provides battery & alternator tests to check the performance of a vehicle's charging system. It does so by checking if the batteries and alternators are in line with voltage specs recommended for the vehicle. When troubleshooting a no start/hard start condition, carrying out this test really helps in knowing where to look, hence saving time.

Oil Light Reset

The 6100P OBD-II code reader makes this process effortless by equipping the user with a guide to oil light reset procedures for most 1996 and newer cars made for the US market. Resetting that oil light gauge is something that you can do on your own and the Innova 6100P maintenance light reset tool walks you through every step making sure that it is properly done

Code Severity Alert

Code Severity Alert: By reading codes, quickly identify if your vehicle needs an immediate fix or if it can wait you get home to fix it yourself.

LED Indicators Alert: There are three LED indicators on the code reader: Green LED: your vehicle is in good condition. Yellow LED: you need to fix the issue and clear codes. Red LED: your vehicle has serious problems, you may not pass the emission test if these problems could not be fixed.

Repair Soltuions 2

Repair Soltuions 2, Fix the Problem

Download for free(App store & Google Play) and pair with your Innova tool for access to the most comprehensive automotive repair database with verified fixes from ASE Master Technicians.

Repair Soltuions 2 to Inspect. Verify. Fix.

Get the most out of your Innova 6100P car scanner. Packed with professional-grade features and benefits, Innova new range of tools come with Bluetooth and WIFI technology and pair seamlessly with the all-new RepairSolutions2 diagnostic app.

Live Data

1. See key information about your vehicle in real time (e.g. RPM, Oil Temp, etc.) to aid in diagnosis.

2. The scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter. Besides, the data logging feature allow you to record the live data and check them later or show to the mechanic. ;)

• 🎄【Top OBD2 Scanner】 Recommended by Ezvid Wiki and Onsite Associates Program. Car care and repair can be expensive, especially if you don't know what the issue is.While you can take it to a mechanic who should have the right tool to diagnose the problem, having OBD2 scanner like FOXWELL NT201 can save you money and time by locating the issue yourself.
• 🎄【One-Click Smog Check】This car scanner with One-Click I/M Readiness key for quick state emissions readiness check and drive cycle verification,test results of your vehicle health status clearly and vividly in graphical way you’ll see if the car is ready to pass the emission test, without the hassle of driving around endlessly, or continuously coming back to the repair shop for retest.
• 🎄【Car Health Doctor】 The OBD reader contains all 10 modes of obd2 tests, quickly read and erase code,On-board monitor test (Mode 6), EVAP system,test,O2 sensor, turn off CEL(check engine light), reset monitor, retrieve VIN of your vehicle,live data in both graph and text forms, freeze frame data,built-in DTC look up library can be automatically displayed after reading.
• 🎄【Wide Coverage & Multiple Language】NT201 vehicle check engine code reader works on most gasoline domestic and import vehicle 1996 US-Based, 2000 EU-Based and Asian cars,included light-duty trucks (12v only), SUVs and mini-vans with standard OBDII/EOBD/JOBD&CAN protocol. Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN. 5 kinds of language avaliable :English, German, French, Spanish, Italian.
• 🎄【A Necessity in Your Vehicle Toolbox】Designed with 2.4' TFT colorful LCD display screen, No battery required, the scan tool is charged directly from the OBDII interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics.Lifetime free update via a computer(Windows 7/8/10 ONLY).No need to read the manual to know what to do, even for a beginner.

Product features

FOXWELL NT201 Car Diagnostic Scanner for All Cars

FOXWELL NT201 Code Scanner offers accurate and effective functionality in terms of reading and clearing diagnostic trouble codes along with any other error readiness monitors, allow you to figure out what’s causing your engine’s issues so that you’re better prepared to face the problem and fix it either at home or at some professional mechanic shop.

The NT201 New Version automotive scanner from Foxwell is a useful car sensor reader for entry-level pro and savvy DIYer that they can quickly and efficiently troubleshoot CAN/OBDII/EOBD problems on most vehicles sold in the USA with model year of 1996 or newer that are equipped with 16pin port.

• I/M Readiness is to test Misfire/Fuel system/Comprehensive component.
• On-Board Monitor Test can be utilized to read and results of on-board diagnostic monitoring, testing for specific components/systems.
• EVAP System Test let you initiate a leak of test for the vehicle’s EVAP system.
• O2 Sensor Test allows retrieval and viewing of O2 sensor monitor test result for the most recently performed test from the vehicle’s on-board computer.
• Review the recorded DTC, read hard (memory) / pending (intermittent) and historic codes and show definitions.
• View Stream Data and Freeze Frame, see the live data by graph or chart.
• Vehicle Info will display the information such as VIN(Vehicle Identification Number), CID(Calibration ID) and CVN(Calibration Verification Number).

On-Board Monitor Test

Troubleshooter functions: These give you a set of recommended fixes for problems detected by the scanner. This feature is tricky to score, since the advice given is only valuable if the diagnosis is precise enough to pinpoint a specific problem.

Evap test: This is a specific mode 8 command that tells your car to start a test of the “evaporative emission control system” (mechanics call it “evap” for short) that prevents fuel from evaporating out of your tank and contributing to smog. Triggering this test won’t fix anything by itself, but once you do fix a problem with the fuel system it’s nice to be able to manually trigger a test. This way you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.

I/M READINESS

To know if you are ready for a smog check, press I/M button(rubber) for 3 seconds.

I/M readiness is to test Misfire / Fuel system / Comprehensive component. Quickly monitor emissions readiness check and drive cycle verification. Let you know the comprehensive status of your car's engine system. Help you pass the Smog Check easily.

RED-YELLOW-GREEN LEDs

Green---In good condition

Yellow---Need to fix the issue and clear codes

Red---Has serious problems

Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

DATA REVIEW

NT201 code readers & scan tool can help you review data, record data, playback data.

Storing diagnostic data report for review, bulit in a lookup library to search for the definitions of DTCs stored in the DTC library and for code breaker information.

VIEW DATA STREAM

The car diagnostic scanner lets you view "real-time" Live Data. This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

READ VEHICLE INFORMATION

This code reader car diagnostic tool can retrieve the vehicle information, such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc., which offers help and convenience to users for repair or parts replacement.

UPGRADE LIFETIME

The NT201 automotive code reader can be updated on Windows systems only(including windows 7/8/10), please visit Foxwell official website and download NTWonder and update.

• 💥【Engine/ABS/SRS/Transmission 4 Systems Diagnostic Tool】 LAUNCH CRP123 obd2 scanner does not only support OBDII standard Diagnosis but also can test vehicles' FOUR main systems-Engine/ABS/ SRS/Transmission.and it also can read/erase fault codes and turn off warning light in above four systems.
• 🚗【Full OBDII Functions Code Reader】full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
• 💥 【4 in 1 Live PCM Data Stream+Lifetime Free Update+stores and playbacks data 】displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.Print the diagnose result easily.
• 🚗【Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,including Suzuki, Honda, Mitsubishi, for Nissan, Toyota, Mazda, Hyundai, Kia,for Subaru, Infiniti, Lexus, Accura, Isuzu.USA car models: Ford, GM,for Chrysler.European car models: Benz, BMW, for VW, Opel, for Volvo, Fiat, Landrover, Seat, Skoda, for Audi, Porsche, Saab, Jaguar etc,.
• 🧲【Worry-Free Services】 LAUNCH Tech provides 5 Years Warranty for Launch CRP123 and 60 days no reason asked refund or replacement.We are welcome to contact seller via Q&A, email and our after-sale-service team for technical support. it is also the perfect Gift for your family and friends.

Product features

LAUNCH CRP123 OBD2 SCANNER FOR ENGINE DIAGNOSIS

engines systems use feedback loops from intake air temperature and flow, manifold absolute pressure, engine coolant temperature, crankshaft and camshaft position, oil pressure, fuel rail pressure, fuel tank pressure, vehicle speed and many other inputs to determine correct air/fuel ratios, camshaft timing, ignition timing and other, critical, operational parameters. LAUNCH CRP123 code reader speeds diagnosis by providing the user access to critical OBD II standard data as well as extended, manufacturer specific, data on engine, fuel, emissions and performance parameters, at the touch of a button.

LAUNCH CRP123 FOR TRANSMISSION DIAGNOSIS

Transmissions System provides a wealth of information about the success of up and downshifts, solenoid action (too harsh, too soft), clutch engagement, fluid temperature, fluid level, pressure, and other, critical, operational and diagnostic information. LAUNCH CRP123 code reader provides the user a detailed view into this critical components operation and function, allowing fast, accurate and complete diagnosis of existing, or potential issues.

LAUNCH CRP123 FOR SRS DIAGNOSIS

A well-functioning, always ready, Supplemental Restraint System (SRS) is absolutely critical for occupant and driver safety. Even minor issues might impact the operation, and performance, of the SRS system. LAUNCH CRP123 code reader quickly, and efficiently, allows the user to retrieve, read and interpret SRS system issues and monitor SRS system functionality to rapidly diagnose, and repair, the cause of the issue. Once repaired, the CRP123 will allow the code to be cleared and the SRS system to be tested, by the PCM, to ensure that the fixes are complete.

LAUNCH CRP123 FOR ABS DIAGNOSIS

Braking systems comes with multiple sensors and actuators operating together to make braking more smooth, consistent and safe for everyone. LAUNCH CRP123 code reader allows the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective, and complete.

4 in 1 Live Data Stream Graph Analyse of Engine/AT/Airbag/ABS Systems

4 Live Data Stream Analyse in 1 Graph: This OBDII diagnostic scanner has big size LCD color screen .it also shows live vehicle sensors data in text,multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters.

WHAT WILL YOU GET FROM LAUNCH CRP123 CODE READER?

1.Lifetime free update and no IP limitation

2.Reads and clears codes on Engine, Transmission (A/T), ABS, and Airbag (SRS) systems – on most makes and most models (16 Pin) after 2006 year

3.Reads and Records Data Streams for ABS, SRS, Transmission and Engine

4.Support for all 10 test modes of OBD II with Enhanced OBD II Mode 6

5.View freeze frame data and I/M Readiness monitor status

6.Retrieves generic and manufacturer specific codes – Current, Permanent & Pending

7.Auto ID Vehicles, Auto Module Search & Fast Protocol ID

8.Retrieves Manufacturer Specific Enhanced Data for Domestic, Asian and European vehicles

9.Menu with DTC definitions in English, Spanish , French, Dutch, Polski, Italian, Japanese, Portuguese，Russian

10.Graph, record, and replay data in full color

11.Intuitive Interface and Button Operation with Sleek, Rugged Design 3.5” TFT full color display

LAUNCH CRP123 OBD2 Scanner SUPPORTS FULL OBD II SPECIFICATION

• Using Mode 06 to Diagnose Misfires

Every time a cylinder misfires, OBD II adds one number to a running count of misfires for that cylinder. When the rate of misfire in any cylinder exceeds a certain threshold (typically around two percent), it will usually set a misfire code for that cylinder and turn on or flash the Check Engine light. If the misfire rate is less than about two percent, however, it usually will NOT set a code. Even so, the misfire may still be noticeable enough that you can feel it when the engine is under load or accelerating.

Mode 01—Request current powertrain diagnostic data.

Mode 02—Request freeze frame information.

Mode 03—Request emissions-related diagnostic trouble codes.

Mode 04—Clear/reset emissions-related diagnostic information.

Mode 05—Request oxygen sensor monitoring test results.

Mode 06—Request on-board monitoring test results for specific monitored systems. EVAP Systems.

Mode 07 — Request emission-related diagnostic trouble codes detected during current or last completed drivingcycle

Mode 08—Request control of on-board system, test or component

Mode 09—Request vehicle information.

Mode 0A—Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information service

LAUNCH CRP123 OBD2 Scanner Lifetime Online Free Update

HOW TO REGISTER & UPDATE

Step1: Go to LAUNCH official site(check it on User Manual) and click updating tool download icon to download it to computer.

Step2: Run the .exe file,and follow the on-screen instructions to install the update tool.

Step3: Launch the program when installed.

Step4: Type in the product Series number,which is located at the back of the tool.

Step5: After to jump to the registration page,enter your information and click Submit.

Step6: Install the TF card from the tool,into the supplied USB TF card adapter and insert into the USB port of the computer.

Step7: Reopen the update tool,select the updates you would like to perform or click"Select All",and then click Download to start download.

Step8: Once all steps are complete,reinsert the TF card into the tool and power the tool via USB cable.

IF it tells "error serial number "when updating,don't worry,just download the latest update tool,and it will be resolved.

• ❂【FULL OBD2 MODES OBDII Code Reader】KONNWEI KW310 code scanner is a professional check engine light diagnostic scan tool, except the normal read/erase engine fault codes function, it still supports Live data, Freeze Frame, I/M Readiness, O2 test, On-board Monitoring that other obd2 scanners don’t have at this price.
• ❂【WORK ON ALL USA 1996 AND NEWER VEHICLES】Work on most 1996 and newer domestic and import gasoline or diesel vehicles(OBDII & CAN) that are located in USA, including passenger cars, SUVs, light trucks, etc. Simply connect the car diagnostic scanner with car’s obd2 port, turn on ignition then it’s ready to analyze check engine light. No battery or apps needed.
• ❂【DIAGNOSIS CAR ON YOUR OWN】Plug and play with the clear main menu, no extra app needed. Even if you’re not familiar with vehicle repair, you can easily take control of this car computer reader, stay at home and get the information you want then fix the car on your own.
• ❂【BEST IN THE MARKET】KW310 car engine diagnostic code scanner is coming with the user-friendly diagnostic interface and optimized software algorithm, it makes diagnosis 2-3 times faster than other OBD2 scanners. It also supports 7 languages, absolutely it’s the most cost-effective code reader ever.
• ❂【3 YEARS LONG AFTER-SALE SERVICE】Gift box package includes obd2 scanner*1, 30" obd2 cable*1, user manual*1. We provide 3 years long after-sale service to every product, any OBD-II Scanner issue or technical problem is welcomed to consult us, we have the professional engineer 7*24 at your service.

Product features

Fast I/M Readiness

The KONNWEI KW310 is an advanced diagnostic scan tool with a patented one-click I/M readiness key, which is convenient to determine the vehicle’s condition. It’s also a perfect car code reader diagnostic tool with reset function.

Live Data

KW310 OBDII code scanner lets you view "real-time" Live Data.

This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

On-Board Monitor Test

This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components.

O2 sensor test

Performs O2 sensor test to allow retrieval and viewing of O2 sensor monitor test results for the most performed tests from the vehicle's on-board computer

View Freeze Frame

KW310 auto code reader is most useful while diagnosing continuous monitor faults like engine misfire and fuel control concerns.

When an emissions related fault occurs, the OBD II system not only sets a code but also records a snapshot of the vehicle operating parameters to help in identifying the problem. This set of values is referred to as Freeze Frame Data and may include important engine parameters such as engine RPM, vehicle speed, mass airflow, engine load, fuel pressure, fuel trim value, engine coolant temperature, ignition timing advance, or closed loop status

DTC Lookup

KONNWEI KW310 OBD2 code reader has a DTC （Diagnostic Trouble Codes）lookup library which built-in over 3000 generic codes definition look up library, it can display current and pending codes stored on the car computer, allows you to search for the definition of DTCs, saves your searching time.

• [ Read and Clear Codes Reader] : LAUNCH Creader 3001 obd2 scanner read and clear fault codes for engine system. In addition, Creader 3001 built in fault codes definition lookup library. LAUNCH Creader 3001 obd2 scanner works on most 1996 and newer US-based vehicles that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). "PLUG AND PLAY" scan tool, equipped with a 2. 5 feet long cable and made of a very thick flexible insulator, very easy to use for beginners.
• [ I/M Readiness Status Test Scan Tool] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
• [ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
• [ View Freeze Frame/Live Data Stream/ O2 Sensor/ MODE 8 Evap System test/ MODE 6 On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
• [ Lifetime Free Upgrade OBD2 Scanner]- Recommended by Mechanic Scotty Kilmer on Youtube. KINGBOLEN provides 5 YRS Warranty for any quality problem with a replacement or refund .Need more help, ask questions on this page or email us, you will get response within 12 hours.

Product features

Why Choose Launch 3001 ?

Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner !

What is different between launch 3001 code reader and AD310 code reader ?

• They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test , Evap system test, On-Board monitor test.

What is different between launch 3001 obd2 scanner and AL319 scan tool?

• They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test

Launch 3001 is obd2 scanner for engine system with full test of obd2.

• Read Codes , Erase Codes, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup .

Launch 3001 support 7 lanuages: English, French, German, Spanish, Russian, Italian, Polish.

Live Data Viewing

Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter.This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.

Freeze Frame Data Viewing

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.

I/M Readiness Check

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SOMG TEST.

O2 Sensor Test

Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.

MODE 6: On-board Monitor Test MODE 8: EVAP Test

• Mode 6: On-board Monitor Test , Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
• Mode 8: The EVAP test function lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.

DTC Loookup

Launch creader 3001 car diagnostic tool built-in OBD-II DTC look-up library, clicking on the error code directly for definition, displaying the error code and its meaning, saving time for you to looking for the meaning of DTC on the internet.

Vehicle Models Coverage

Launch car code reader works on most after 1996 and newer vehicles models in America, European and Asian. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN.

Lifetime Free Update

You can go to the launch official website to download and install the update tool, then connect the scan tool to a PC via the USB cable,

lifetime free update can ensure you use the newest software.