7 best cable for bmws

Product description

✪ Description:

For E39 and E46, please turn the switch to all the right. Other car models, please turn the switch to all the left.(Most of the cars in the market do like this. If there is the special ones, it depends on the model of your car.)

✪ Function:

1. Read and delete errors

2. Adaptations

3. Driver programming

4. Apply coding

and others...



✪ Specification:

♦1. Supports protocols

1) Fast magistral D-CAN and PT-CAN (500 kbit/s)

2) Slow magistral K-CAN (100 kbit/s)

3) Standard BMW protocol (BMW OBD interface).

♦2. D-CAN for:

1) E60, E61 od 03/2007

2) E83 od 09/2006

 3) E81, E87 od 03/2007

4) E90, E91, E92, E93 od 03/2007 

5) E70 (new model X5)

6) R56 (new model MINI)

PT-CAN, K-CAN-fully switchable speed of magistral CAN - ou can diagnose driver without any car

♦3. Protocol "BMW OBD interface" for older cars:

1) From 1995 to 1998 (don't need K-line).

2) From 1998 to 03/2008 (all models)



✪ Package List:

1pc x for BMW INPA K+CAN With Switch Cable

1pc x CD Driver

• ♣【Inpa k + dcan cable】 Inpa k + dcan car obd cable allow diagnostic for E CHASSIS from 1998 - 2019. Works with D-CAN, PT-CAN, K-CAN and etc.
• ♣【Original chip】100% Original Brand New FTDI 232RL.It is imported from the Original factory.Board and raw materials are made of high quality Plastic materials.
• ♣【Switched inpa k+Dcan】You can use the switch to do more cars .Some cars need disconnect to use the inpa k+dcan,but others need connect. It can support more cars after adding the switch.Not every model need switch.
• ♣【Install Note】The software cannot work with antivirus. The virus protector may notify it as“virus” by mistake. Please disable or uninstall the anti-virus software on your PC to make sure the diagnose software works normally.
• ♣【Compatible system】 It is perfect for Windows 7 32bit system. Sometimes, it is compatible with Window 8/10, it is up for your system. Don't fit the mac OSX.

User questions & answers

Product description

Brand New 16pin OBD Cable Connector Adapter for Autel

Ferature:

- Programming cable for BMW

- Work for Autel MaxiSYS Pro MS908P MS908S Pro

- 16pin OBD Connector Adapter Cable

Function:

- Use with Autel MaxiSys scanner to diagnose for BMW

- OBDII Cable Adapter

- Perform Active Tests

- Enables Read and Clear Codes

Installation:

- Plug and play

Please Note:

YOU MUST USE THE APPROPRIATE CONVERTER. NO RETURNS WILL BE ACCEPTED FOR DAMAGE CAUSED BY USING THE WRONG POWER TYPE

1. Dear Customer, Your satisfaction and positive feedback is very important to us.

2. Please leave positive feedback and 5 stars if you are satisfied with our items and services.

3. We will do our best to solve any problems and provide you with the best customer services. Thank you very much.

4. Meanwhile, it is highly appreciated if you could contact us first when you have any problem with our items or services.

Package:

1x Fit for BMW 16pin Programming Cable for Autel MaxiSYS Pro MS908P

• For Autel Cable - 16Pin connector cable scan tool fit for BMW Autel MaxiSYS Pro MS908P MS908S Pro
• Cable Adapter - For autel cable, use with Autel MaxiSYS scanner to diagnose for BMW
• Auto Diagnostic Tool Connector - Car diagnostic tool cables and connectors. Every for autel cable connector must take inspected and tested multiple times before the shipment!
• Material + Installation - The cable adaptor connector contructed of premium plastics and metals for long lasting durability and reliability. Robust materials design. Plug and play without modification
• Guarantee - We offer autel cable 24 month service. If you have any questions about cable adaptor, please contact us by email, we will reply you within 24 hours. You Will Get a for autel cable for BMW.

User questions & answers

Product description

ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series Fit for BMW

Feature:

- For BMW F series single module programming or modules hiding ENET data line

- For BMW hidden ENET data cable , F series programming cable , the latest ESYS 3.22.5 and V49.4 data.

- For BMW F series, the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3, brush hidden programming line

One can hide modules or program single module:

1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)

2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )

3. Display engine output and torque meter ( purely fun, look engine output )

4. Cancel confirmation screen big screen boot delay

5. Open the voice recognition function

6. Three kind of bluetooth phone ringtones ( personality only )

7. Increasing the cic memory address to 50

8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )

9. The digital speed display ( fun only ) etc.

Purchase Notes:

1.If you encounter installation problems, please contact us, we will will send you the software, help you solve the installation problems

2.If CDs is damaged when you received, please contact us to get software download link for free

3.The software is very large, so the installation will takes a lot of time, we can not provide installation video, pls find the installation video on the website such as Youtube, thank for your understanding

Package Including:

1x 16Pin Enet OBD2 Cable ethernet Connector F-Seires Coding Cable OBDII to RJ45

• Ethernet to OBD Cable Vehicle Application - 5 ft. Ethernet to OBD cable supported for BMW models include: BMW F-series, the new 1 Series, 3 Series, 5 Series, 7 Series, GT, X3 and the latest BMW G-Series.
• Choose to Program Single Module or Hide Multiple Modules - Modules are the separate computer programs that run various aspects of your vehicle, from the physical function to the accessories and tools of your vehicle. With this cable and a diagnostic tool, you can choose to program a single module or hide multiple modules. This all works through the ENET data line and the E-SYS ICOM coding.
• Software Compatibility - OBD Interface cable works with many different software options, such as ECOM, ICOM, INPA, ISIS, and ISTA, it will work with any of them, giving you full access to your vehicle’s modules.
• High Quality ESYS Data Cable - ENET Ethernet to OBD interface E-SYS ICOM coding cable made of premium material, this car usb cable obd2 diagnostic scanner is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
• What You Will Get - We offer e-sys icom coding f-series for bmw enet 24 month service, any questions about OBDII cable converter adaptor, pls contact us by Email, the software will be sent to you by Email, we will reply you within 24 hours. You will get a OBD2 connector scan tool ENET Cable for BMW, with CD inside the package

User questions & answers

Product description

Supported for BMW series single module programming or modules hiding ENET data line.

Supported for BMW hidden ENET data cable , F series programming cable , the latest ESYS 3.23.4 and V50.3 data.

Supported for BMW F series , the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3, brush hidden upscale programming line goes on sale .



Lock / unlock sound confirmation

Operate the navigation menu including watching DVD when driving

Display engine output and torque meter

Cancel confirmation screen big screen boot delay

Open the voice recognition function

Three kind of Bluetooth phone ringtones

Increasing the CIC memory address to 50

Display digital MPH in the little info box on the dash

Unlock the doors when put in Park



Package including:

1pc x BMW ENET Interface Cable (Ethernet to OBD cable)

• The Ethernet to OBD cable can be used to program, activate, modify and disable modules in your BMW model.
• Supported car model: BMW F-series, the new 1 Series, 3 Series, 5 Series, 7 Series, GT, X3 and the latest BMW G-Series.
• Supported software: E-SYS, INPA, ISTA, ISIS, ICOM, ECOM, Rheingold
• Our enet cable bmw is high-quality, well-plated and shielded for long-term mechanic use and excessive application.

User questions & answers

Product description

Features:

Brand New & High-Quality parts (Not Genuine).

According to the original factory specifications.

Strict quality control standards to Build and test.

Design improved for more durability, stable and updated characteristics, high reliability.

Perfect match and direct replacement of original parts.



Specifications:

Item: Positive Terminal to Battery Cable

Warranty: 2 Years



Interchange Part Number:

Manufacturer Part Number: 61129217031, 6112 9217 031, 61 12 9 217 031.

Interchange Part Number: 61126988974, 6112 6988 974, 61129217031-88974, 82506098001.



Compatibility:

2008-2013 128i E82/E88

2008-2013 135i E82/E88

2013 135is E82/E88

2006 325i E90

2006 325xi E09/E91

2007-2013 328i Coupe E92

2007-2011 328i Sedan E90

2007-2012 328i Wagon E91

2009-2012 328i xDrive E90/E91/E92

2013 328i xDrive Coupe E92

2007-2008 328xi E90/E91/E92

2006 330i E90

2006 330xi E90

2009-2011 335d E90

2007-2013 335i Coupe E92

2007-2011 335i Sedan E90

2009-2012 335i xDrive E90/E92

2013 335i xDrive Coupe E92

2011-2013 335is Coupe E92

2007-2008 335xi E90

2008-2013 M3 Coupe E92

2008-2011 M3 Sedan E90

2013 X1 E84

*Note: Please confirm the OE number and compare old parts before purchase.



Package Include:

1Pc x Positive Terminal to Battery Cable.

• [PREMIUM QUALITY] Battery Cable is designed to provide a solid connection to your vehicle's battery. For quality assurance, our Battery Cables are tested for conformance to product standards.
• [FITMENT] Positive battery lead fits for BMW 2008-2013 128i 135i, 2006 325i 325Xi, 2007-2013 328i 335i, 2008-2013 M3, 2013 X1, etc.
• [REPLACE PART NUMBERS] 61129217031, 61 12 9 217 031, 61126988974, 61126938495.
• [EASY TO INSTALL] Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
• [SERVICE GURANTEE] This Positive Terminal to Battery Cable complete with 2-Years warranty. If you have any problem, feel free to contact us.

User questions & answers

Product description

For BMW-compatible ENET Interface Cable (OBD2 to Ethernet) For Coding / Programming / Diagnostics on F-series Cars

(Using BMW E-SYS, INPA, ISTA, ISIS, etc.)

High Quality BMW ENET OBD2 Diagnostic & Coding Cable made using 5 Feet "LEONI KERPEN" industrial grade cable for long-term mechanic use and excessive application

PROPERLY Grounded & Shielded RJ45 Connectors, Metal Film Resistors and all using Lead-Free Solder.

Length: 2m



Yellow connector+ Yellow cable, Red connector+ Red cable, Blue connector+ Blue cable, Gray connector+ Gray cable are available. Other colors have in warehouse, if you need to OEM, can just let us know.

One color is just for one cable, not include the other colors, pls note, thanks.

This is cable works on all F Series BMW cars from 2009 until now.

COMPATIBILITY

For BMW 1-series: F20, F21, F44, F45, F46

For BMW 2-series: F22, F23

For BMW 3-series: F30, F31, F34, F80 (M3)

For BMW 4-series: F32, F33, F35, F36, F82, F83 (M4)

For BMW 5-series: F07, F10, F11, F18

For BMW 6-series: F06, F12, F13

For BMW 7-series: F01, F02, F03, F04

For BMW X-series: F15, F16, F25, F26, F48

For BMW i-series: I01 (i3), I12 (i8)

For Mini: F55, F56

For Rolls-Royce: RR01, RR02, RR03, RR04, RR05

For More... (ALL F-series cars)

Note that this cable does not work for the older E-series cars.

BMW is a registered trademark of BMW AG and is only used in this listing as reference for compatibility information. No copyright infringement is intended.

Product description

Specifications:

Condition: 100% brand new

Color: shown as picture

Cable Length: approx.150cm

Package Weight: approx.120g

Fitment: 

For E83 after 9/2006

For BMW E81, E87 after 3/2007

For BMW E90, E91, E92, E93 after 3/2007

For BMW E70 (New X5)

For BMW R56 (New Mini)

And others

Package List:

1 * Diagnostic USB Cable

1 * CD Driver



Notes:

1. Please kindly confirm the fitment before ordering to make sure this item is perfectly fit.

2. Please allow 1 - 2cm error due to manual measurement, thanks for your understanding.

• ★ Interface USB OBD2 for BMW-INPA/Ediabas-K+DCAN allows full diagnostic. Wide application for BMW models from 2001-2016.
• ★ Can read and erase error codes. Supports Double K-Line. Supports High Speed CAN (500 kbit /s). Supports Low-Speed CAN PT (100 kbit /s).
• ★ Easily switch between older and newer models. Simple installation with included drivers. The cable length is about 150cm.
• ★ The control line Battery detects battery and ignition voltage. Manufacturing meets stringent quality requirements.