8 best iwata impact guns

Product description

The 2767-20 M18 FUEL High Torque 1/2 inch Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry’s most compact cordless High Torque Impact Wrench at 8.39 inches length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 inch friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

• Provides maximum productivity by removing stubborn and high torque fasteners up to 2X faster than the competition
• Most compact cordless High Torque Impact Wrench in its class at 8.39" in length
• Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control.
• REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
• Features a friction ring design to ensure quick and easy socket changes
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• LED light to illuminate the work area

User questions & answers

Question:	If i purchase this through amazon, is the milwaukee 5 year warranty still honored? i read that amazon is not an authorized milwaukee retailer
Answer:	Milwaukee’s 5 year warranty is from the purchase date (from a valid retailer) or from the date code on the tool if you don’t have a proof of purchase from a valid/approved retailer. I’ve had warranty repairs under both circumstances.
Question:	What is max torque
Answer:	On a full battery it has 1,000 ft lbs of forward torque and 1,400 ft lbs of reverse torque. Thanks Jim
Question:	Is this truly at 2767- 22? Gen 2 1400 ft lbs? because the description does not match what it should be if that is the part number
Answer:	It is. the 2767-22 is just a combo kit that comes with two batterys and a charger. it is the beast.
Question:	The description says it has 1000 ft lbs of torgue. The spec page says 750 in lbs. Which is it
Answer:	1000 lbs-ft fastening. 1400 lbs-ft breaking. and slows to 750rpm when nut is loose.

Product features

Milwaukee 2767-20 M18 Fuel High Torque

The 2767 M18 Fuel 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day.

4-Mode Drive Control with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose.

This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

Product description

1.3, 1.5, 1.8 Fluid tips Primer, base, clear Cup & Regulator included

User questions & answers

Question:	What is the minimum cfm of this gun
Answer:	Haven’t used yet but I believe that it stated in the info that came with the gun. Soon I do not have access to the info at present time.
Question:	Why go for this and not a Iwata W400 for,the same price? What are the differences
Answer:	Personally I haven't used a W400 before. But I have used this 9270 for almost a year and the results are outstanding. This is a good fine sprayer.
Question:	Does it come with a cup
Answer:	yes it does.
Question:	Is this a full size gun or a mini
Answer:	It is full size
Question:	Have one of you guys use this gun to spray base coat
Answer:	So far for the money, it a great gun for base & clear good for everything with the right tip

Product description

features description: power state brushless motor delivers up to 1200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque red link plus intelligence prevents damage to the tool and battery due to overloading or overheating most compact cordless high torque impact wrench in its class at 8.59 in length one-key compatible: customize, track and manage tool S performance and location. m18 fuel with one-key technology provides the most repeatable impact wrench in the industry

• Package Dimensions: 12 L x 6.5 H x 11.5 W (inches)
• Package Weight: 8 pounds
• Country of Origin : China

User questions & answers

Question:	How come you cannot ship to CA
Answer:	Materials used to make item causes cancer , CA laws and rules !
Question:	Whata the different between this one and
Answer:	The 2864-20 is the bare tool only, no battery charger or case. The 2864-22 is the Kit.
Question:	Why does this item not ship to California
Answer:	True about Commies in CA, but they shipped mine last week.
Question:	Is this with friction ring
Answer:	It does have a friction ring AND the hole through the anvil for keepers. It does NOT have the solid anvil with the spring loaded nipple for holding sockets.

Product description

The DEWALT DCF899M1 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil (4.0 Ah) features up to 700 ftpounds of MAX Torque and 1200 ftpounds of MAX breakaway torque. This tool has a compact design of 8 13/16" in length and weighs only 7.2pounds for ease of use. It also has multi speed control for a variety of applications (0 400/1,200/1,900 RPM). A heavy duty 1/2" Anvil with detent pin. An LED light with 20 second delay allows for increased visibility in dark or tight workspaces. Includes: DCF899 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil, 20V XR Lith Ion battery (4.0 Ah), Fast Charger, Tool bag.

• Compact design and lightweight at only 7.2 pounds
• Heavy Duty 1/2 inch Anvil with detent pin
• Up to 700 feet pounds of MAX Torque
• LED light with 20 second delay for increased visibility
• Maximum Speed (RPM):1900

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899M1 20V MAX XR Brushless High Torque Impact Wrench with Dentent Pin Anvil

The DCF899B 20V MAX* XR Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque
• Compact design of 8-13/16" in length
• Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
• 1/2" Anvil with detent pin (also available with hog ring)
• LED light with 20-second delay for increased visibility

Product description

Makita’s 18V LXT Lithium-Ion Brushless Cordless 4-Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (5.0Ah), Tool Only (XWT15Z) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of Nut-Busting Torque.Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed.The XWT15Z features Makita's Extreme Protection Technology (XPT ), a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.It is part of Makita’s 18V LXT System. The LXT Cordless System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries, takes a user from power tools to outdoor power equipment to get the job done. Makita 18V LXT Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. Batteries are sold separately. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls . Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

• BL Brushless Motor delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of Nut-Busting Torque
• Compact and ergonomic design at only 5-5/8" long
• 4-speed power selection switch (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM) for precise fastening control in a wide range of applications
• 3 forward and 3 reverse Auto-Stop modes for increased efficiency
• Full speed mode function reduces trigger pull to reach full speed

User questions & answers

Question:	Where is this tool made
Answer:	na
Question:	I have an xfd13 drill and xdt13 impact driver. does this tool use the same batteries and charger
Answer:	Comes With one 4 amp. battery and charger. Battery has a push button fuel level - 4 bars, fully charged. Zero bars- dead. Charges in 1 to 2 hours.
Question:	Will this work with a 2.0 Ah battery
Answer:	It is a 1/2 in. Drive impact. Any 1/2 Drive socket will fit.
Question:	With this unit being a detent anvil type- do we need to insert a pin to release the sockets? or can we pull on it hard enough to release
Answer:	300 ft. lbs. torque and up to 3,200 impacts per minute

Product features

Makita XWT15Z 18V LXT Lithium‑Ion Brushless Cordless 4‑Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (Tool Only)

Makita’s 18V LXT Lithium-Ion Brushless Cordless 4-Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (5.0Ah), Tool Only (XWT15Z) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of Nut-Busting Torque.

Product description

The M18 Fuel one-key 1/2" High torque impact wrench w/Friction Ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry. The power state Brushless motor delivers up to 1, 000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for pneumatic impact wrenches. The industry most compact cordless high torque impact wrench at 8.39” in length, This tool allows for more access in tight spaces.



compatible with one-key, this is the industry first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tooled performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined Set-Ups for specific fasteners and materials, or have complete control over output Speed and power for the specific application at hand. With one-key, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish With a calibrated torque device to reach their targeted torque value. The Tool's memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool.

• Up to 1400ft-lbs nut-busting torque
• Most compact cordless high torque impact wrench in its Class at 8.39" In length
• Onekey technology provides the most repeatable impact wrench in the industry
• One-key compatible: customize, track and manage tool’s performance and location.
• Easily toggle up to four custom performance profiles that can be saved to the memory of the tool

User questions & answers

Question:	brushless motor
Answer:	Yes it fits!
Question:	Model number for the case
Answer:	Will work for 2863 and the 2767 only
Question:	What is the difference between the one key and regular impact
Answer:	Milwaukee 49-16-2861
Question:	Does this impact wrench 2363-20 have a Friction ring or a detent pen.. Milwaukee shows this model to have a friction ring. Picture here is different
Answer:	Yes it will. The impact is the 2767-20, which comes in the 2767-22 milwaukee kit.

Product description

The DEWALT DCF890B 20V MAX* XR 3/8" Compact Impact Wrench (Baretool) features a DEWALT built brushless motor for increased efficiency and runtime. It is compact and ergonomic with only 5.5" head length and 2 lbs (tool only), and has a variable speed trigger which provides additional control. This Impact wrench offers 3 LEDs which illuminate your work area, along with a belt clip to keep your tool handy for additional ease of use. Torque = 150 lbs - Ft. This is a baretool item - battery sold separately. Backed by DEWALT's 3 year limited warranty. Includes: DCF890 - 20V MAX* XR 3/8" Compact Impact Wrench Tool, Belt Clip.

• DEWALT built brushless motor for increased efficiency and runtime
• Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)
• Variable speed trigger for added control
• Power Tool Type : Cordless
• 3 LEDs provide visibility in darks areas of jobsite
• Battery & Charger Sold Separately

User questions & answers

Question:	Does dewalt make this brushless version with a 1/4 anvil
Answer:	I would say a legitimate torque that this tool can reach is 100ft.lbs. maybe 105-110 at a full charge... maybe
Question:	Is this impact made in the USA
Answer:	Yes
Question:	Does it come with battery & charger
Answer:	Like max fiveish pounds
Question:	Does this model have the pin anvil or hog ring anvil
Answer:	Hi! The GDR18V-1400B12 Impact Driver Kit comes with one 18V Lithium-ion 2.0 Ah SlimPack battery, model number BAT612. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

Solvent Paint Gun Kit Includes: FLG-670 HVLP Gun, 900cc Aluminum Cup, 1. 3, 1. 5 & 1. 8mm Fluid Tips, Air adjusting valve with gauge. Features: Multiple fluid tips included, Paint Cup included, Air adjusting valve with gauge included (select models), Soft, uniform spray patterns, Precision machined air caps & fluid nozzles provide a quality finish, HVLP high transfer efficiency, Anodized internal passages, Easy to clean anodized finish, High grade stainless steel components

• The New HVLP Finishline 4 series from Devilbiss offers the latest in enhanced atomization technology
• Achieve superior results with its precision machined air cap and fluid nozzles
• All internal passages are anodized and the anodized body makes it easy to clean.
• Requires 13 CFM at 23 PSI
• Multiple fluid tips included (1. 3, 1. 5, 1. 8)

User questions & answers

Question:	Would you suggest this gun or a fuji semi-pro? what has a better spray
Answer:	I'm not a pro by any means but I love me spray gun. Replacement parts and different size tips seem to be readily available and it lays down paint smooth. Its everything I expected for the price.
Question:	how does this sprayer work with latex paints
Answer:	I bought a 2.2 mm tip for use with high build polyester primer, but as a bonus, discovered it works very well with latex.
Question:	can you use a smaller cup
Answer:	Yes, including disposable cups
Question:	Should I use filters with this gun when using automotive paint or primer
Answer:	ALWAYS filter the paint you’re putting in your spray gun!!! IF NOT, there is a 99.999% chance you will have some type issue and have to repaint... Additionally, ALWAYS thoroughly clean your spray gun after every use... A GRAM OF PREVENTION IS WORTH A KILOGRAM OF CURE... (Metric Version)