14 best auto body slide hammers

Product description

HEAVY DUTY DENT PULLER ALSO KNOWN AS A MORGAN KNOCKER MUST FOR BODY WORK VERY HEAVY ROUGHLY 24" LONG COMES WITH MANY ACCESSORIES AND COMES IN A BLOW MOLDED CASE

• Includes these attachments: Rubber cover, 6pc Hasp Iron, Cast Iron Hammer, Long Tube, Hex Nut, Circular Nut, Circular Pipe, Tapping Screw, Right Angle Flat Steel, 2pc Hex Standard Component, Connector, Double Barreled Connector
• Slide hammer set is constructed with heat treated steel for extra strength and durability for all your pounding and pulling operations
• 13 pound slide hammer 24" long, giving you a greater pulling force
• Hammer dent removal set can be used in auto body repairs, non-damaging removals of dents and hubcaps

User questions & answers

Question:	tread end
Answer:	8 lbs
Question:	does this come with a vise grip attachment
Answer:	no
Question:	What is the true actual slide weight
Answer:	I do have the scissor's and they are definitely NOT for left-handed folks. They also aren't real good if your have large fingers.
Question:	This does come with any adapters that can hold glue tabs
Answer:	Mine are all metal and very sharp but have had for many years

Product description

Auto body repairs can be costly and a time consuming effort; however the dent puller slide hammer set provides you all the necessary attachments you may need for any pulling or pounding operations. From dent removal to even pulling out hubcaps, the heat treated steel, five pound slide hammer provides great strength while the twenty four inch pole allows for greater pulling force. The set includes many accessories ranging from a hasp iron, long tube hasp iron, double barreled connector, and much more. The set comes encased in a blow molded sturdy plastic case with four snap closures for easy and safe storage.

• Slide hammer set is constructed with heat treated steel for extra strength and durability for all your pounding and pulling operations
• Eight pound hammer and the 23-1/4 inch slide pole combined gives you a greater pulling force
• Hammer dent removal set can be used not only in auto body repairs, but non-damaging removals of dents and hubcaps
• Set comes complete with: large hook, small hook, straight hook, thin hook, offset blade, pipe blade, double coupling, chain and hook assembly, and screw-in dent puller
• Comes encased in a blow mold case with four snap closures for safe keeping when not in use

User questions & answers

Question:	What is the weight of the slide hammer weight
Answer:	No

Product description

The OEMTOOLS Dent Puller Set is ideal for removing those stubborn dents! This Set comes with a variety of attachments to remove dents in hard to reach places. Set includes: 12Lb Hammer, Slide Hammer Shaft, Slide Hammer Handle, Slide Hammer Adapter, Deep Hook, Short Hook, Door Edge Tool, Claw, Straight Driver Hook and Chain, Sheet Metal Screw and Holder, and Nose Piece with Screw. Fully dropped forged steel accessories for strength and durability. Comes in blow mold storage case.

• 12 Lbs. Hammer, Slide Hammer Shaft, Slide Hammer Handle, Slide Hammer Adapter, Deep Hook, Short Hook, Door Edge Tool, Claw, Straight Driver, Hook and Chain, Sheet Metal Screw and Holder, Nose Piece with Screw
• Comes in a Blow mold Storage Case
• Fully Dropped Forged Steel Accessories for Strength and Durability
• For use with steel and aluminum rivets noses: 1/8-Inch (32 mm), 5/32-Inch (40 mm), 3/16-Inch (48 mm), 1/4-Inch (64 mm)

User questions & answers

Question:	how do you use this product
Answer:	10 lbs, very heavy duty, I was very impressed by this tool. Worth every penny.
Question:	Whats the thread size of the tool to see if another attachment will work
Answer:	It is made in Taiwan.
Question:	How much is the hammer weight 12lbs or 12kg
Answer:	5 pounds
Question:	Does anyone know where this slide hammer is made
Answer:	Yes.

Product features

OEMTOOLS Dent Puller Set

The OEMTOOLS Dent Puller Set is ideal for removing those stubborn dents!

This set comes with a variety of attachments to remove dents in hard-to-reach places.

Fully dropped forged steel accessories for strength and durability. Comes in blow mold storage case.

For use with steel and aluminum rivets noses: 1/8-Inch (32 mm), 5/32-Inch (40 mm), 3/16-Inch (48 mm), 1/4-Inch (64 mm)

Set Includes:

12 lbs. Hammer, Slide Hammer Shaft, Slide Hammer Handle, Slide Hammer Adapter, Deep Hook, Short Hook, Door Edge Tool, Claw, Straight Driver, Hook and Chain, Sheet Metal Screw and Holder, Nose Piece with Screw

• Practical: Use the ABN Auto Slide Hammer 9-Piece Set, 5lb Pound – Dent Puller Kit for Small Hail Dent Removal on Car Body to pull out deep and long dents on the body of your vehicle
• Versatile: Designed to remove dents on sheet metal and other surfaces
• Durable: Constructed from forged hardened steel for increased pulling strength and longevity
• Comfortable Grip: Handle allows for easy use and ensures a strong and proper grip during dent removal
• Contents: Package includes 5-pound hammer + nose adapter (18 TPI I.D. x 14 TPI O.D.) + nose cone (18 TPI x 24 TPI) + metal pulling screw (14 TPI) + pierce punch (24 TPI x 13 TPI) + puller hooks + plate edge puller + L-Puller

User questions & answers

Question:	I seen alot of slide hammer advertised 5 pounds is the hammer mandrel truly 5 pounds
Answer:	If it's the one I bought , yes 5/8 rod, all slide hammers , this one is small, have pipe thread for attachments .
Question:	whats the diameter of the shaft
Answer:	About 18 inches
Question:	Thread diameter size? the description is inaccurate. it states tpi, but doesn’t state what size rod. other abn hammer states 5/8 x 18 tpi. is it same
Answer:	Pulling dents etc.
Question:	How long is the slide hammer
Answer:	I wished I could answer this, but the tool is at work. Sorry.

Product features

Check This Out! - ABN Auto Slide Hammer Set

Who Are We?

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

About ABN Auto Slide Hammer 9-Piece Set, 5lb Pound - Puller Kit for Small Hail Dent Removal on Car Body

A Closer Look

Versatile

This tool is perfect for removing small dents caused by hail and is designed to remove dents on sheet metal and other surfaces.

Product description

86Pcs Dent Puller Kit Car Body Dent Repair Device Welder Stud Weld Welding

Attention:This kits should be used with car body dent spot repair device welder.

Package included:

1 x Dent Pulling Slide Hammer

1 x Spot Welding Gun

3 x Spot Welding Gun Switches

1 x Dent Pulling Claw

1 x Dent Pulling Hook

1 x Washer Holder

1 x Spot Welding Tip Double Sided

1 x Graphite Rods Holder

10 x Wiggle wires

50 x Straight Pulling Pads

10 x Star Pulling Pads

1 x Triangles Holder

5 x Graphite Rods

• 86Pcs Dent Puller Kit Car Body Dent Repair Device Welder Stud Weld Welding
• Attention: This kits should be used with car body dent spot repair device welder
• Package included: 1 x Dent Pulling Slide Hammer, 1 x Spot Welding Gun, 3 x Spot Welding Gun Switches, 1 x Dent Pulling Claw, 1 x Dent Pulling Hook, 1 x Washer Holder
• 1 x Spot Welding Tip Double Sided, 1 x Graphite Rods Holder, 10 x Wiggle wires, 50 x Straight Pulling Pads, 10 x Star Pulling Pads, 1 x Triangles Holder, 5 x Graphite Rods
• Delivery: The normal delivery time is 4-8 working days, please take this as the standard, if you have any questions, please contact us in time

User questions & answers

Question:	Is the spot welder Electric
Answer:	I just mic'd it, 0.570" ~9/16" or 14.6mm

Product description

Description

This Product Is Designed To Remove Dents For Auto Body, It Repairs The Auto Body Without Removing The Inside Panel And Upholstery. Drop Forged Steel Hooks, Pullers And Attachments, Heavy Duty And Durable. A Variety Of Attachments Easily Pulls Dented Or Creased Sheet Metals Back Into Place. Long Shaft Gives More Space, Resulting In A Powerful Pulling Force In Hard To Reach Dented Areas Like Door Panels, Side Panels, Fenders, And The Roof. Our Item Which Will Work On Most Cars And Trucks Is An Ideal Choice For Professional Auto-Body Repairs. Comes Also With A Portable Box For Easy Transport. High Quality With Competitive Price, All In GOPLUS. Don't Hesitate, Just Add It Into Your Shopping Cart And Bring One Home!



Feature

Brand new and durable

Solid steel shaft with knurled handle for sure grip

Drop forged steel hooks, pullers and attachments

Heat treated, Heavy duty

A long shaft allows a more powerful pulling force

Perfect for both home and business

Can work on most cars and trucks

Comes with a plastic box for easy carry



Specifications

Material: carbon steel

Slide pole length: 22-3/4"

Slide pole diameter: 3/4"

Total weight: 15.5 Lbs

Size of plastic box: 24'' x 9'' x 5''

Package include: 1 x dent puller tool set



Note: Notice: Use extreme care when using this tool. Always use the right tool for the right job and keep it away from children.

• 【Durable and Strong】Heavy duty drop-forged carbon steel construction, tempered and treated with black oxide to resist rust and corrosion for added durability. Sliding hammer plated silver.
• 【Easy to Use】Solid steel shaft with knurled handle for sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with knurled handle for sure grip and a long shaft allows a more powerful pulling force. Perfect for both home and business.
• 【Apply to Car Type】This dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
• 【Attachments Content】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, taping screw, connector hasp iron and double barreled connector.Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, taping screw, connector hasp iron and double barreled connector.
• 【A Portable Case】Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist abrasion.

User questions & answers

Question:	what would the thead be this Slide Hammer
Answer:	Does not work with welded studs. BTW my slide bar broke during first use. If you can get another metric thread on a new bar, you have a nice dent puller.
Question:	is this a slide hammer as well as a dent puller
Answer:	No this product is much to week to pull a bearing. The slide bar snapped at the threaded section while pulling a simple dent
Question:	Does this kit work with welded studs to remove dents as well
Answer:	yes, it is. And the input voltage is 220 50HZ/ 380 V 50HZ. output voltage is 6V-9.9V
Question:	can i use this to pull rear bearings
Answer:	The whole thing weighs 4 lb, 14oz, of pure garbage. This may be worth knowing if selling it for scrap.

Product description

Entry level design for students, home, hobby and occassional use. Heavy duty construction with serrated thumb wheel to grip pins securely without slipping. Cast iron slide weight and comfortable vinyl grip.

• For use with Motor Guard Magna-Spot Stud Welders and all other brands
• 2.5 lb. Cast iron slide weight
• Made in USA

User questions & answers

Question:	what size of magna draw pin that will fit for magna slide hammer
Answer:	yes...

• 💎Repair Auto Body Dents without Damaging the Original Paint--There's no need to weld or drill the car for this slide hammer paintless dent repair tool. It can remain the value of original auto body.
• 💎Pneumatic Operation for Powerful Pulling-- Comes with air powered 3 lb (1.36kgs) sliding hammer to bring the stronger power and strength for easily pull the dents.
• 💎Convenient to Use With-- Just connect to the air compressor, and the 3 sizes suction pads will form a stronger vacuum power to work with. Air working pressure is about 70~170 PSI (5 bar ~12 bar) Or using the small tabs with PDR glue sticks. Remove glue by alcohol and plastic shovel without damage to the auto body.
• 💎With 3 pcs Pads and 10 pcs Glue Tabs to Fit the Different Dent Sizes-- Pad of 2.36 inch, 4.72 inch, 5.9 inch (60, 120,150 mm) in dia., to use the most suitable one on the round and smooth surface to reach the max effect. And the 10 tabs for the hail or smaller dent.
• 💎With 10 pcs Hot Glue : Viscosity--White (Strongest) > Yellow (Stronger) > Black (Standard)--Professional and Effective Tools for Shops or DIY Market--This dent puller kit is perfect for repairing dents on cars, trucks, vehicles, etc.

User questions & answers

Question:	what is the vacuum pump rated at in cfm and hg
Answer:	Should take both sizes that are manufactured by the company. If I'm not mistaken it will adjust or come with adaptor for both.
Question:	Will this work on hail
Answer:	It use to fix damage body car

Product features

3 Suction Pads

• Comes with 3 suction pads of 60mm, 120mm, 150mm, matching dents of different sizes.

Easy To Change

• The pads with thread nuts are easy to change and at the same time connect to the puller firmly.

Knurled Design

• The knurled handle of the slide hammer makes it easy to hold and operate without slipping.

What You Get

• 1-Piece Slide Hammer
• 3-Piece Suction Pads of 60mm, 120mm, 150mm
• 1-Piece 13" Air Inlet Extension
• 1-Piece 1/4" Air Plug
• 1-Piece Adapter For Glue Tabs
• 10-Piece Glue Tabs
• 10-Piece φ11.2mm* 300 mm Long Glue Sticks-- Black*5 pcs + Yellow*3 pcs + White* 2 pcs
• Different Viscosity for Choosing-- White (Strongest) > Yellow (Stronger) > Black (Standard)-- It is recommended to start using the standard glue sticks.

Step 1

• Choose the suction pad with the right size, and attach the air hose to the slide hammer and air compressor.

Step 2

• Align the pad to the dent of panel firmly, then switch the valve until the panel starts to pop out.

Step 3

• Use the slide hammer to pull out the dent until it is recovered.

Product description

Great Kit for DIY Auto Body Repairs

• Great Kit for DIY Auto Body Repairs
• Complete 9pc Set. *Heat Treated Steel Construction. *
• Multi-purpose tool used for auto body repair
• Shaft: 1/2" *TPI: 20 threads. *Slide Weight: 5 lbs
• Includes: Slide Hammer Metal Pulling Screw Pierce Punch 2 Puller Hooks 2 Steel Nose Cones Plate Edge Puller Puller

• [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders; Lightweight dent puller slide hammer tool ensures maximum pull power
• [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut; 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included)
• [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool; Then, pull back on the T handle, while you snap the weight towards the handle; Weighted slide hammer adds torque and pull-power
• [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts
• [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper grip for less user fatigue; 5lb. (2.3kg) slide hammer is a 5.5-inch (14cm) drop-forged steel weight that features a dumbbell style grip for security

User questions & answers

Question:	Does this puller come with a case
Answer:	Yes, within reason. It will work on the Dents that aren't too close together. It won't perform a miracle on a totally hail damaged surface. It's the only type of tool I know of that will remove dents without damaging the paint.

Product features

FIT FOR YOUR TOOL KIT

Use the ABN 5 Pound Slide Hammer Axle Puller Set to remove CV axle joints, hubs, bearings, gears, pulleys, and even dents from your car, motorcycle, refrigerator, washing machine, or other metal surfaces.

MAXIMUM PULLING POWER

Lightweight automotive slide hammer puller set has a 23 x 5/8-inch hardened shaft that ensures optimum strength for maximum pulling power, and it features a 5/8-inch x 18 threaded section to fit hooks, seal and axle bearing attachments, dent removal tools, 2 and 3-jaw adapters, vise grip adapters, or extension bars.

DURABLE AND RESISTANT

Threads are professionally machined which makes assemble of this toolkit very easy. 5-pound steel seal puller hammer weight provides smooth operation, improved durability, corrosion resistance.

• 【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating.
• 【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits.
• 【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents.
• 【DURABLE】:It is durable for years of use, our sag repair kit can help you repair your cars by yourself for many times.
• 【GUARANTEE】:The pneumatic dent puller will be packed well to prevent breakage during transportation. If there is any questions please feel free to contact with us, our experienced customer service team will response in 24 hours.Come with 2-year warranty.

User questions & answers

Question:	Can I get smaller suction cups
Answer:	Not sure what the Cfm is, but this thing will only pull large large pop in dents. The small cups really won't do much.

Product features

Quality Material

Pneumatic slide hammer dent puller is made of galvanized steel materials, more tough is not easy to break,it has strong corrosion and oxidation resistance.

Pull Out Deep & Big Dents Easily

Its air Pressure reaches 90 PSI, and the professional air dent puller produces much stronger power than an adhesion one. aims at severe dents instead of small pits.

Easy to Use

Connect the air supply to generate great vacuum power for pulling out the dents. Stronger strength makes the job easy for you.

Protective Pad

Paintless dent repair kit pulls dents out without harming the original paint which gives the panel a higher and longer protection with its special coating.

Energy and Time Saving

Compared with the auto body shops, the pneumatic dent puller we offer will save a lot of money for you. Our paintless dent removal tools kit can help you repair your cars by yourself for many times.

Wide Application

The Air Suction Dent Puller Slide Hammer is not only for car dent removal, but also can be used refrigerator, motorcycle body, washing machine and hail damage.

Pneumatic Air Suction Dent Puller

The pneumatic dent puller, with pneumatic control can creates a super-strong vacuum. It is an easy tool for pulling out dents from vehicles, and pull most dents out of panels without damaging paint. The air compressor is required, no drilling, welding or sanding required. It is a super-strong vacuum create by pneumatic control.

• Premium Material
• Pull Out Deep & Big Dents Easily
• Easy to Use
• Energy and Time Saving

Product description

Specifications

Input voltage: 110 V

Input power: 800 VA

Output voltage: 4 V

Max current: 1600 A

Certificates: CE ISO

Insulation grade: H

Protection grade: IP22

Welder gun weight: 4.5 kg (9.9 lbs)

Package size: 65 x 40 x 25 cm(25.6 x 15.7 x 9.8 inches)

Gross weight: 14 kg (30.9 lbs)

Package Content

1 x Welder Gun

500 x Nails 2.5 mm (0.1 inches)

500 x Nails 2.0 mm (0.08 inches)

50 x Meson Pads

50 x Straight Pads

20 x Wavy-wires

1 x Multi-functional Pulling Hammer

1 x Meson Electrode

1 x Wavy-wire Electrode

1 x 6-Hook Head

1 x Nails Electrode

1 x Nails Lock (Inner)

1 x Nails Lock (Outer)

1 x Shrinking Electrode

1 x Straight Pad Electrode

• 【SIMPLE OPERATION】- With a simple press on the trigger, nails will be welded successfully. Then change to the pulling hammer. Hang the hammer to the hole on nail and you’ll be able to pull the vehicle metal back to normal.
• 【COMPACT&PORTABLE】- Super sensitive trigger in handle for one-handed operation. Easy to manage D handle design. With a case, it is lightweight hand-held auto body repair stud welder easy to use.
• 【SUPERIOR SAFETY】- The machine thermal protection will work when the main transformer temperature gets to 95ºC. The safety is ensured.
• 【HEAVY DUTY SLIDE HAMMER】- Heavy duty construction with quick release chuck to grip pins firmly without slipping. Cast iron slide weight and comfortable vinyl grip.
• 【WIDE APPLICATION】- For the repairing of metal elastic deformation, plastic deformation, direct damage(breakage, scratch, dents, and rust), as well as some of the indirect damage, targeting at some of the repairing work for damage caused by car collision.

• 13PC Heavy Duty Dent Puller w/10lbs Slide Hammer Auto Body Truck Repair Tool Kit
• 10 LBS Malleable slide hammer kit Great for auto body repair Slide weight: 10LBS
• Solid steel shaft with knurled handle for sure grip Drop forged, steel hooks, pullers and attachments Slide pole length: 22-3/4" Slide pole diameter: 3/4" Completed kit
• Completed kit 1 Handle Washer 5 Pc hasp iron Long tube hasp iron Cast iron hammer Right angle flat steel Hex taping adaptor Hex taping screw holder
• Taping screw Connector hasp iron Double barreled connector Blow molded case Perfect for home and business Heavy duty puller works on most cars and truck

Product description

SCITOO Automotive Repair Tools

Quick and convenient removal of body dent, reliable repair tools

Suitable for:

Most vehicles and trucks

Package Included:

1pc handle

1pc washer

5pc hasp iron

1pc long tube hasp iron

1pc cast iron hammer

1pc right angle flat steel

1pc hex taping adaptor

1pc hex taping screw holder

1pc taping screw

1pc connector hasp iron

1pc double barreled

Feature:

Drop forged and heat treated carbon steel construction

Come with a blow molding case

• 【FUNCTION】 The SCITOO Automotive Dent Puller is designed to remove dents form auto body, it repairs the auto body without removing the inside panel and upholstery.
• 【PACKAGE INCLUDED】 1pc handle, 1pc washer, 5pc hasp iron,1pc long tube hasp iron, 1pc cast iron hammer, 1pc right angle flat steel, 1pc hex taping adaptor, 1pc hex taping screw holder, 1pc taping screw, 1pc connector hasp iron, 1pc double barreled.
• 【SUPERIOR MATERIAL】 Drop forged and heat treated carbon steel construction for strength and durability and through strict quality inspection, and the acid corrosion resistance is strong. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence.
• 【FEATURES】 Come with a blow molding case, It is convenient for you to store tool parts and carry them.
• 【ATTENTION】 Before purchasing this item, please double check the product details information. If you have any questions, feel free to contact us for help.