6 best air tank for train horn

An air tank for a train horn is a crucial component of the air horn system used on trains and some large trucks. Train horns are powerful and loud horns that serve as a safety feature to alert pedestrians and vehicles to the presence of a train. Here's what you need to know about the air tank used in a train horn system:

  1. Purpose: The air tank is an integral part of the train horn system, serving as a reservoir for compressed air. Compressed air is necessary to power the train horn, which produces the loud and distinctive sound associated with trains.

  2. Compressed Air Source: In a train or large truck, the compressed air needed to operate the horn is typically supplied by an onboard air compressor.This compressor pressurizes air and stores it in the air tank for immediate use when the horn is activated.

  3. Horn Activation: When the train engineer or truck driver activates the horn, a valve opens, releasing the pressurized air from the air tank into the horn mechanism. The rapid release of air through the horn's diaphragm produces the characteristic loud and powerful sound.

  4. Tank Capacity: The size and capacity of the air tank can vary depending on the specific requirements of the horn system. Larger tanks can store more compressed air, allowing for longer and more powerful horn blasts.

  5. Refilling: As the air is used to sound the horn, the pressure in the tank decreases. The onboard air compressor continuously refills the tank to maintain an adequate supply of compressed air for horn operation.

  6. Safety and Regulatory Compliance: Train horn systems, including the air tank and horn, must meet safety and regulatory standards to ensure proper operation and reliability. Compliance with these standards is crucial for the safe operation of trains and large vehicles.

  7. Maintenance: Regular maintenance of the air tank, compressor, and horn components is essential to ensure the horn system functions correctly. This includes checking for air leaks, inspecting valves and connections, and verifying the compressor's performance.

  8. Emergency Use: Train horns are not only used for signaling but also in emergency situations to warn of potential dangers. The reliability of the air tank and horn system is critical in these scenarios.

  9. Aftermarket Replacement: In the automotive and trucking industry, if there is a need to replace or upgrade the air tank or horn system, aftermarket options are available. These may vary in terms of size, design, and features to suit specific requirements.

In summary, an air tank for a train horn is a vital component of the horn system used on trains and some large vehicles. It stores compressed air supplied by an onboard air compressor and releases it to power the train horn, creating the distinctive and attention-grabbing sound associated with trains. Proper maintenance and compliance with safety standards are essential for the reliable and safe operation of train horn systems.

Below you can find our editor's choice of the best air tank for train horn on the market
  

Wolo 830 Sherman Tank & Compressor All-in-One

Wolo

Based on 47 reviews Check latest price

Product description

Wolo’s new SHERMAN TANK & COMPRESSOR is an ALL-IN-ONE complete high-pressure on-board air system. The compact one-piece design has two steel mounting brackets that are welded to the tank, making installation easier then conventional onboard air systems. The heavy-duty 1-gallon tank is painted black to prevent rust and corrosion. The compressor’s heavy-duty 12-volt motor is balanced to precision and is hidden inside the tank’s housing. The pump’s cylinder head has cooling fins that allows the compressor to operate at a lower temperature, preventing overheating. Other features are: built-in pressure switch, pressure gauge and quality brass fittings. The kit comes complete with mounting hardware, 10 ft. of flexible high-pressure hose, 20 ft. coiled filler hose with brass fittings; all that is needed for a professional installation. Tank Size: L 14-1/2 in. x W 5-1/2 in. x H 8-1/4 in. Compressor - Voltage: 12-volts, Current: 10.5-amps at peak, CFM: 1.03, In-line fuse holder with 20-amp fuse provided, Duty-cycle: 10% @ 100 psi, Pump has an air filter, Oil-less maintenance free, Permanent magnet motor that is gearless with thermo protection. Tank information - 1-Gallon storage, welded steel mounting brackets, pressure switch 80 psi auto-on / 120 psi off, pressure gauge, all brass fittings.

  • The compact one-piece design has two steel mounting brackets that are welded to the tank, making installation easier then conventional onboard air systems
  • Heavy duty 1-gallon tank is painted black to prevent rust and corrosion
  • 12-volt motor is balanced to precision and is hidden inside the tank’s housing.
  • Cooling fins allow the compressor to operate at a lower temperature, preventing overheating
  • Built-in pressure switch, pressure gauge and quality brass fittings

User questions & answers

Question: Can this be used for both air horns and air up tires
Answer:
Question: Will I have to buy a solenoid to connect this to a horn
Answer:
Question: Will this run a air horn
Answer:
Question: Weatherproof? Able to be mounted under vehicle
Answer:
Question: Anyone try using one of these to pump up utv tires on the trail? i only need 10 psi. would this work quickly? i like it because its small and light
Answer: Yes if set up correctly
Question: Do you need a air tank with this to run horns
Answer: You will if you want to use the horn button on the steering wheel. I did not, installing a separate button under the dash
Question: does this need oiled at any time
Answer: Yes it’ll run air horns. Not sure about train air horn
Question: What's the best horns to use for this compressors
Answer: This is a frail machine. Don"t ever install it near heat or exposed to engine heat. The tank has a drain valve underneath, if you mount it under vehicle it would have to be in upright position. The seller does not recommend doing it.

Viking Horns | New!!! Train Air Horn Kit | Trumpets + Compressor + Tank | Loud Low Pitch Sound | 3 Black Trumpets | 150 PSI Compressor | 1.5 Gallon Air Tank | V3305/307

Viking Horns

Based on 1 reviews Check latest price

Product description

Loud Train Sound Air Horn is made entirely of metal in black color. Comes with a 1.5 (6 liter) air tank, 150 PSI 12 volt heavy duty Air compressor, air pressure gauge, air pressure switch, mounting hardware, hose, fittings, Teflon tape sealer, installation instructions, and FREE horn button. This Air horn system will produce a very loud train sound of 152 decibels, and surely will get everybody's attention around you. Great for SUV, truck, RV, pick-up, boat and marine, and many other applications. Air tank/compressor dimensions: 16" L x 11-1/2" H. Air horn dimensions: L 19 1/4" x W 18" x H 7.5".

  • Sound Output: Loud Low Pitch 152 Decibels Black train Sound Air Horn Kit, With 150 PSI Compressor And 1.5 Gallon Air Tank
  • Horn Construction: 3 Metal Chrome Trumpets
  • Air Compressor: Heavy duty 12 volt 150 PSI
  • Ait Tank: 1.5 Gallon Metal housing
  • FREE horn button included

User questions & answers

Question: On my truck I have air bags already have Compressor and a air tank. Will the train horns work through that compressor and air tank
Answer: I love these gloves for a lot of reasons. One of the best factors is the grip you get with them. I generally didn't use gloves a lot when I was doing contracting because of the grip issue. Of coarse gloves such as these weren't available then. Good pick for sure

HornBlasters 5 Gallon 8 Port Black Steel Air Tank

Based on 42 reviews Check latest price

Product description

The Standard tank for all of our 5 gallon kits, our 5 Gallon Black 8 Port Tank is perfect for any on-board air applications such as adjusting tire pressure, load leveling, Jake Brakes and much more! This durable tank is burst rated for up to 300 PSI and meets all DOT requirements. The seven 1/2" ports and one 3/4" port provide maximum air flow, which is great at preventing bottleneck issues found in other tanks. The high flow ports make any on-board air uses work more effectively and are mandatory for massive locomotive train horns that demand a lot of air, such as the Nathan Airchimes or Leslie's. The ports are positioned for convenience and ease of installation with 4 ports on the side, 1 on each end, 1 on top, and 1 on the bottom. This makes it very easy to install a drain cock and safety blow-off valve even if you mount the tank upside down or sideways. The tank has an epoxy enameled inside as well as a powder-coated black finish to prevent rust. Simply put, this is one of our highest quality 5-gallon tanks you can buy. Volume: 5 gals (18.92 L) 1/2" NPT Ports: 7 3/4" NPT Ports: 1 Burst Pressure: 300 PSI Working Pressure: 150 PSI Length: 20.5″ (520.7 mm) Diameter: 9.5″ (241.3 mm) Height: 11.5" (292.1 mm) (With Legs) Weight: 20.5 lb (9.3 Kg) This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

  • Powder Coated Black - This tank features a stealth black finish.
  • 5 Gallon - This tank offers plenty of air volume without taking up too much space. This tank measures 9.5″ in diameter and 20.5" long.
  • 8-Port Configuration - This tank features 8-ports for plenty of outlets. Seven of these ports are 1/2" NPT whereas the remaining port is 3/4" NPT.
  • Interior Coating - Our 5-gallon tank features an interior red-oxidized coating to prevent moisture buildup from rusting the tank out.
  • Two Mounting Feet

User questions & answers

Question: Where was this tank made
Answer: We recommend machine-washing your gloves in cold water using a mild laundry detergent to get rid of the odor. For more information on cleaning your gloves, please see our full Care Guide at the bottom of our website.
Question: where is the 3/4 port located on the tank
Answer: These fit pretty tight for me. U could go up a size for comfort if the large is tight.
Question: What are the dimensions of this tank
Answer: If you need the nimble dexterity of two fingers and a thumb to label the boxes, these gloves would be good. If you're moving cardboard boxes in mass, the exposed skin will still dry out/crack. Go with a full glove if that is a concern.
Question: what's the max presssure this tank can hold
Answer: How big in a unit of measure are your son's hands?
Question: Where or what type of 1/4 air line should I buy? I want to make sure it can support the air pressure and it does not break
Answer: I buy these for my 21-year-old grandson who puts together engines on an assembly line. He says there are often metal burrs and that these gloves hold up really well. He said they are much better than gloves claiming to be cut resistant.
Question: What’s the air hose fitting diameter
Answer: For more information on cleaning your gloves, please see our full Care Guide at the link below. https://www.mechanix.com/us-en/care-guide
Question: Does it sound like a locomotive or just a loud truck horn
Answer: These gloves are not water proof so water will soak into the inside. They are the best gloves for dry work. BW
Question: Will it mount to a Jeep
Answer: If you are asking if they get stinky from sweat the answer is yes. They are machine washable too. I two pairs one in the wash one in use.

Uwariloy 150DB 12V 4 Trumpet Train Air Horn Kit, 150 PSI Air Horn Compressor with 0.8 Gal Air Tank for Truck/Train/Car/SUV/Van/Boat

Check latest price

Product description

Specification:

Voltage: DC 12V

Current: 23.0A

Maximum pressure: 150 PSI

Pump capacity: 3L (0.8GAL)

Size: about 390 (L) × 140 (W) × 180 (H) mm / 15.35 * 5.51 * 7.08inch

Pressure switch settings: 90 PSI on, 110 PSI off

Size: 165/230/295/350×90(dia)mm

Sound level: 135dB

Operating air pressure: 0.3Mpa-0.8Mpa

Packing List:

1*Air Compressor Pump

  • Black Finishing: 4-trumpet air train horn with glistening black finishing.
  • Great Sound Quality: Small size but powerful volume and tuned train horn sound, great sound quality, extremely stable frequency.
  • Long Service Life: Long service life, reliable working performance.
  • Easy to Install: Unique design and fashion style, easy to install. 2 years warranty.
  • Wide Application: Fit for cars, trucks, boats and all types of motorcycle.

User questions & answers

Question: does the compressor/tank have to be mounted inside the cab? Or can it be under a bed side panel? In other words can the compressor handle the elements
Answer: This we can not help as the manufacturer are all over.
Question: Are they loud
Answer: Depends on their sizes. If they are little they might in sleeping bags. But it is more for small children to just play in. An air mattress doesn’t fit in it. (See measurements.)
Question: Does the air compressor refill itself
Answer: 58 x 58 x 46 inches. Thank you
Question: Can this unit support air horn and air bag systems
Answer: Hello, am 249 pounds and can fit in with room. its about 5 squared
Question: Does this horns sound nice N deep like a real Train Horn
Answer: It will easily fit inside that size play yard. It is the size of a mattress. Check the description for EXACT measurements of height and width and length. Perfect for small kids to play in.
Question: What size diameter is the air hose
Answer: This is only one size. It was perfect for my queen size bed so it’ll be huge for a twin.
Question: can the solenoid be operated at 24 volts
Answer: This size 200cm(Length)*150cm(Width) mosquito net is suitable for 200cm(Length)*150cm(Width) bed or bigger bed, Queen Size is 80x60 inch or 203x152 cm, so it will okay.
Question: What size is the electronic air solenoid
Answer: I also have 2 gliders and it's the perfect size. They have plenty of room to play in there. It's big enough for a queen size bed if that gives you a better idea of size. :)
Question: How many amps does the compressor pull? Also, how many amps does the electric valve pull
Answer: No
Question: What are the specs on the air hose
Answer: Yes. The breathability is important. If you want them grippier there is an armortex grip version of these gloves.
Question: Is there an installation guide or video to watch for how to install properly
Answer: These Original gloves do not have hard knuckles. Please see our M-Pact line for increased knuckle protection.
Question: Can I mount this upside down
Answer: I ordered a pair of XLs and feel the size was about right (what I expect XLs to be).
Question: can i wire this into my factory horn
Answer: I primarily use mine for Mountain Biking and trail building. So far they have held up quite well for that. Since the palm is only a single layer it would wear out sooner than the standard gloves. The upper is quite thin and breathes really well. As for building a shed, they will probably hold up fine, just make sure you get the proper size, mechanix has a pretty spot on sizing chart on their website.
Question: Do buttons come with the kit
Answer: I'd say they flex but I wouldn't say they stretch

Vixen Horns Complete Train Horn Kit with 200 PSI Air Compressor, 3 Gallon Tank, Quad Trumpet (VXO8330/4114) and Wiring Kit (VXK7599) Bundle

Check latest price

Product description

A full train horn system, ready to install. At the heart of this package is the intense quad trumpet air horn, drawing immediate attention. Chrome look, made entirely of metal for maximum protection against all weather conditions. This system includes a 3 Gallon air tank, 200 PSI 12 volt air compressor, pressure gauge, pressure switch, hose, fittings, horn button, wiring kit, thread sealant and mounting hardware. Ideal for all vehicles with a 12V system. A bold, loud choice.

  • Immensely loud Quad Trumpet Train Air Horn
  • Tank Capacity: 3 Gallon (12 liter)
  • 200 PSI Compressor Black (12 volt)
  • Thermal Overload Protection
  • Wiring Kit and Mounting Hardware Included

Kleinn Air Horns GMTRK-1 Bolt-On Train Horn

Kleinn Air Horns

Based on 19 reviews Check latest price

Product description

The GMTRK-1 includes the Model 220 Dual Train Horns, a 130 PSI compressor and 1 gallon Made In USA air tank. Easy installation of the compressor and tank in the auxiliary battery tray while the horn mounts behind the front air dam. Everything required comes in one box. Fits 2007. 5-2018 Chevrolet and GMC 1500 Full Size Trucks and SUVs, 2007. 5-13 Cadillac Escalade, Escalade ESV and Escalade EXT

  • Fits 2007. 5-18 Chevy / GMC / Cadillac 1500 Pickup, Tahoe, Suburban, Yukon, Escalade (2007. 5-13)
  • Direct-Fit kit is 100% bolt-on with no drilling or cutting required
  • 130 PSI compressor and 1-gal tank mount in spare battery tray
  • Includes Model 220 dual train horn that produces 154. 2 decibels
  • Includes all necessary hardware, wiring, airline and fittings

User questions & answers

Question: dodge ram dually
Answer: Its flat. I know what your asking, "does this have to have a dome shaped canopy in order for the roof to work?" It will work in either kind - though the roof is flat mesh , the center attachment strap is stretchable and will reach up to a dome support peak. It will also work in a canopy with flat horizontal cross braces - the center attachment simply attaches to the middle of the crossbracing, the outer attachments to the bottom of the outer canopy braces, and the mesh roof is flat. The EZ up cube tent is the same, but the Ozark Trail cube tent from Wal-Mart and Amazon MUST have a dome canopy, as the ceiling of it is peaked in the middle. There you go. Ignore the other answers, they're wrong or clueless, lol.
Question: Do i need the gmtrk-1 or 2 for a 2012 gmc sierra 4 dr 4x
Answer: Yeah there is a long strap than connects to the tip the roof that holds up the netting inside, there is a velcro strap just inside of netting that will hold up your light of choice.
Question: If there happens to be a leak, when my truck is off, will the compressor drain my battery when the car is off
Answer: Yes, to the left (if you are inside the tent) of one of the two doors. You have to look pretty carefully for it, though. I didn't see it until I was taking DOWN the tent after my first campout!
Question: How long does it take to install
Answer: There is a lip at door but not really tall. Would be able to roll over just fine. As far as space in the tent it is huge with the sidewalls going straight up it gives a ton of useable space.

Latest Reviews

View all