12 best sw fuel pumps
SW Fuel Pumps refers to electric fuel pumps designed for automotive applications.These fuel pumps are a critical component of a vehicle's fuel system, responsible for delivering a consistent and pressurized flow of fuel from the gas tank to the engine. Here's what you should know about SW Fuel Pumps:
Electric Fuel Pumps: SW Fuel Pumps are electrically powered, which means they rely on electrical energy to operate. They are commonly found in modern vehicles and have largely replaced older mechanical fuel pumps.
Fuel System Component: The fuel pump is an integral part of a vehicle's fuel system. It typically resides inside the gas tank and is responsible for pumping fuel to the engine at the required pressure and flow rate.
Pressurized Fuel Delivery: SW Fuel Pumps are designed to provide a consistent and pressurized supply of fuel to the engine's fuel injectors or carburetor. This pressurized fuel delivery is crucial for the engine's performance and efficiency.
Compatibility: When selecting an SW Fuel Pump, it's essential to ensure that it is compatible with your vehicle's make and model. Different vehicles may require specific pump designs and specifications.
Reliability: SW Fuel Pumps are expected to be reliable and long-lasting. They should be able to withstand the demands of continuous operation without failure, ensuring that the engine receives a consistent fuel supply.
Fuel Pressure Regulation: Many SW Fuel Pumps incorporate a pressure regulator to maintain the correct fuel pressure. This regulator ensures that the engine receives the appropriate amount of fuel under varying operating conditions.
Safety: Fuel pumps are designed with safety features to prevent fuel leaks and reduce the risk of fire hazards. These safety features are crucial for the overall safety of the vehicle.
Replacement Parts: SW Fuel Pumps are considered replacement parts, and they may need to be replaced if they fail or show signs of wear and tear. Replacing a malfunctioning fuel pump is essential to ensure the vehicle's proper functioning.
Symptoms of Failure: Common symptoms of a failing fuel pump include engine misfires, reduced power, poor fuel efficiency, and difficulty starting the engine. If you notice these issues, it's advisable to have the fuel pump inspected and replaced if necessary.
Professional Installation: Replacing a fuel pump typically requires specialized tools and knowledge. It's often recommended to have a qualified mechanic or technician perform the installation to ensure it's done correctly.
In summary, SW Fuel Pumps are essential components of a vehicle's fuel system, responsible for delivering pressurized fuel to the engine. Ensuring the proper functioning of the fuel pump is crucial for the vehicle's performance and reliability, and if any issues arise, it's advisable to have a professional inspect and replace the pump as needed.
Below you can find our editor's choice of the best sw fuel pumps on the market- 1-YEAR / 365-DAY UNLIMITED MILEAGE WARRANTY
- PLEASE CHECK THE YEAR/MAKE/MODEL DROP DOWN MENU AT THE TOP OR PRODUCT DESCRIPTION OF THE PAGE TO MAKE SURE THIS PART FITS YOUR VEHICL
- Meet or exceed OEM specifications in fit, form and function
- Every single pump is 100% tested before shipping out
- IF YOU HAVE ANY QUESTIONS ABOUT OUR PRODUCTS, PLEASE MESSAGE US BEFORE YOUR PURCHASING. WE WILL ANSWER YOU WITHIN 24 HOURS
User questions & answers
Question: | Does this fit a 2005 Mitsubishi lancer |
Answer: | It is a 3/8" hose with 1/4" ends. |
Question: | Does it fit a 1993 mercury grand marquis |
Answer: | Hello. The manufacturer specifications state 3/8". Thank you for your question. Norex Customer Service |
Question: | Does this fit a 2002 honda accord |
Answer: | Hello, Thank you for reaching out! We would not recommend running bleach and water through the air hose as this product is specifically designed for air. Please give us a call at 800-645-8258 if you have any questions. Thank you, Team Flexzilla |
Question: | Do you test these before sending them out because the one i bought from you guys and just spent 6 hours replacing sure as hell doesn't work |
Answer: | Hello, Thank you for reaching out! The max PSI on this hose is 300 PSI. Please give us a call at 800-645-8258 if you have any further questions. Thank you, Team Flexzilla |
- COMPATIBILTY - ECCPP Electric Fuel Pump for 1999 Mercury Tracer GS 2.0L L4 122ci ;1999 Mercury Tracer LS 2.0L L4 122ci
- FUNCTIONS - Suck the fuel from the fuel tank, pressurize it and then deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Guaranteed supply of continuous fuel to the injector
- DISCLAIMER - ECCPP Fuel Pump Assembly DOES NOT come with pressure sensor, the original black pressure sensor on the top of the assembly must be reused at time of installation
- BENIFITS - ECCPP Fuel Pumps are low noise pump, better driving comfort, balancing cost and reliability to meet different needs
- IMPORTANT NOTE - Please make sure to match the exact part numbers between this part and the part that you are replacing. Contact your mechanics, or send us a message to make sure it matches exactly in case of doubt before purchasing
User questions & answers
Question: | Does the part come fully assembled? .what does expert installion?do they install the part |
Answer: | I always test a part before I install in my own and customers vehilces. Exspecially wuen you have too remove and intake and fuel tank |
Product features
COMPATIBILTY:
1999 Mercury Tracer GS / LS / Trio 2.0L L4 122ci
1999 2000 Ford Escort LX 2.0L L4 122ci
1999 Ford Escort Sport 2.0L L4 122ci
1999 Ford Escort ZX2 Coupe 2.0L L4 121ci
1999 2000 Ford Escort ZX2 S/R 2.0L L4 121ci
1999 2000 2001 2002 Ford Escort SE 2.0L L4 122ci
2000 2001 2002 2003 Ford Escort ZX2 2.0L L4 121ci
THE TIPS FOR CARING YOUR FUEL PUMP:
- Always keep enough fuel in the tank for the pump to be submerged in gas.
- Keep the habit of fueling to your car in time.
- Always keep enough fuel in the tank for the pump to be submerged in gas.
- Choose high quality car gasoline.
- Fuel comes through filter to the Tubine Impeller. So if the fuel contains too much impurities, it can block the filter and damage the Tubine Impeller. So please replace the Filter on a regular basis and always use high quality gasoline.
REPLACE YOUR FUEL PUMP WHEN:
Engine hard to coldstart------The failure of safe valve cause the fuel system pressure decreased
REPLACE YOUR FUEL PUMP WHEN:
Acceleration and power are both getting down-------The entry of filth into the pump leads to the over-worn of the pump body and the impeller, causing the decrease of the pump’s pumping function
REPLACE YOUR FUEL PUMP WHEN:
Engine hard to coldstart------The failure of safe valve cause the fuel system pressure decreased
REPLACE YOUR FUEL PUMP WHEN:
Oil level display incorrect------Floating arm was distorted, failed or damaged during transportation or installing
- OE Replacement Fuel Pump Assembly, Directly Fit
- Fits Mercury Milan 2010-2011 V6 3.0L Flex---FWD
- Fits Ford Fusion V6 3.0L Flex 2010(FWD), 2011, 2012(FWD)---SE/SEL Sedan
- Reference Number: E2562M, P76587M, FG1142, AE5Z-9H307E, AE5Z-9H307L, SP2102M
- 1 year unlimited-mileage quality guarantee
User questions & answers
Question: | Is the Just the assembly or come with the fuel pump |
Answer: | Yes, this universal electric fuel pump can work on a 2002 honda accord 2.3 |
Product features
Application:
Ford Fusion 2011 V6 3.0L Flex Sedan SE Submodel
Ford Fusion 2010 V6 3.0L Flex Sedan SE Submodel, FWD
Ford Fusion 2012 V6 3.0L Flex Sedan SE Submodel, FWD
Ford Fusion 2011 V6 3.0L Flex Sedan SEL Submodel
Ford Fusion 2010 V6 3.0L Flex Sedan SEL Submodel, FWD
Ford Fusion 2012 V6 3.0L Flex Sedan SEL Submodel, FWD
Mercury Milan 2010-2011 V6 3.0L Flex Sedan FWD
Production Facilities
1. Qualified facilities and advanced testing equipments, plus 100% quality inspection.
2. Strict production process quality control, ensures the impeccable product quality.
Production Inspection
1. Test the performance under extreme electrical and thermal conditions.
2. Precise design meets or exceeds OE specifications.
Easy Installation
1. Replace the new filter or strainer.
2. Professionally clean or replace the fuel tank.
3. Inspect, repair or replace suspect vehicle connectors and wiring.
4. Consult your repair manual for proper procedures.
Product description
PRODUCT SPECIFICATION:
- Same quality as OE for less money
- Designed with the latest software and manufactured with modern tooling
- Direct fit replacement
- Installs the same as factory unit
- Same dimensions as OE part
Product description
Fits: 2015 MULE 600 2015 MULE 610 4X4 2015 Mule 610 4x4 XC 2015 MULE 610 4x4 XC CAMO 2015 Mule 610 4x4 XC SE 2014 MULE 600 2014 MULE 610 4X4 2014 Mule 610 4x4 XC 2014 MULE 610 4x4 XC CAMO 2014 Mule 610 4x4 XC SE 2013 MULE 600 2013 MULE 610 4X4 2013 Mule 610 4x4 XC 2013 Mule 610 4x4 XC Realtree APG HD 2012 MULE 600 2012 MULE 610 4X4 2012 Mule 610 4x4 XC 2012 Mule 610 4x4 XC Realtree APG HD 2011 MULE 600 2011 MULE 610 4X4 2011 Mule 610 4x4 XC 2011 Mule 610 4x4 XC Realtree APG HD 2010 MULE 600 2010 MULE 610 4X4 2010 MULE 610 4x4 Realtree APG HD 2010 Mule 610 4x4 XC 2009 MULE 600 2009 MULE 610 4X4 2009 Mule 610 4x4 Hardwoods Green HD 2008 MULE 600 2008 MULE 610 4X4 2008 Mule 610 4x4 Hardwoods Green HD 2007 MULE 600 2007 MULE 610 4X4 2007 Mule 610 4x4 Hardwoods Green HD 2006 MULE 600 2006 MULE 610 4X4 2006 Mule 610 4x4 Hardwoods Green HD 2005 MULE 600 2005 MULE 610 4X4 2005 Mule 610 4x4 Hardwoods Green HD
- Official Kawasaki Product.
- Part Number: 49040-7001
- Model Fit: See Description
- Use OEM parts for best performance
- Use OEM for best quality
User questions & answers
Question: | Does fuel pump 49040-0770 work om mule 600 enine nr, fj400de059482 2006 model |
Answer: | Yes |
Question: | What size fuel line |
Answer: | It fit in my 2003 Lancer so it should fit a 2005 |
Question: | Does this work on a diseal |
Answer: | yes, for 1993 mercury grand marquis 4.6 litter |
Product description
HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends. Each HFP fuel pump and installation kit is backed by a lifetime free replacement warranty. If there is any issue of any kind at any time, give us a call or email us and we will replace the pump free of charge. горивна помпа, palivove čerpadlo, brændstofpumpe, benzine pomp, polttoainepumppu, pompe à carburant, Benzinpumpe, üzemanyagpumpa, pompa bahan bakar, 燃料ポンプ, bensinpumpe, bomba de combustivel, топливный насос, bomba de combustible, bensinpump, benzin pompası, 연료 펌프, отын сорғы, 513033694, 513033643, 513033579, 513033738, 513033650, 513033654, 861302600, 2003 2004 2007 2008 2009 2010 2011 2012 Grand Touring 800 SE V-1000 Legend 600 HO 800 V-1000 Skandic 600 SUV V-800 SWT SDI V 1000 800
- Drop-in replacement, 100% Direct OEM fit - no modification necessary, all parts match OEM specifications.
- Compatible with modern ethanol-infused pump gasoline.
- This pump is designed and constructed for problem free operation in excess of 100, 000 miles or 30, 000 hours.
- Specifically designed for quiet operation.
- Replaces Ski-Doo 513033654, 513033694, 513033643, 513033579, 513033738, 513033650
- YHTAUTO Affordable and Prime Fuel Pump Module Assembly, Directly Fit
- Fits Mercury Milan 2010-2011 V6 3.0L Flex---FWD Only
- Fits Ford Fusion 2010-2012(SE/SEL Sedan) V6 3.0L Flex---FWD Only
- Reference Number: E2562M, P76587M, FG1142, AE5Z-9H307E, AE5Z-9H307L, SP2102M
- One year quality warranty
Product features
Vehicle Fitment
- Fusion 2011 V6 3.0L Flex Sedan SE, FLEX
- Fusion 2010 V6 3.0L Flex Sedan SE, FLEX, FWD
- Fusion 2012 V6 3.0L Flex Sedan SE, FWD
- Fusion 2011 V6 3.0L Flex Sedan SEL, FLEX
- Fusion 2010 V6 3.0L Flex Sedan SEL, FLEX, FWD
- Fusion 2012 V6 3.0L Flex Sedan SEL, FWD
For Mercury:
- Milan 2010-2011 V6 3.0L Flex Sedan FWD
How to Know If Your Fuel Pump is Going Bad?
Sign 1. Car jerks or sputters at high speeds
Sign 2. Whining noise from the fuel tank
Sign 3. Difficulty or fails to start
Sign 4. Stalling at high temperatures
Sign 5. Low gas mileage
Sign 6. Losing power when accelerating
Sign 7. Power drain when turning, going up hills, coming out of a red light
Sign 8. Sudden and unexplained power surges
How to Test the Electric Fuel Pump?
Step 1. Locate the fuel pump in the fuel tank
Step 2. Turn the key to the run position and listen if any buzzing coming from the fuel pump. If no sound, proceed to Step 5
Step 3. Set the amperage on voltage meter and place the clamp on the positive wire to the pump
Step 4. Start the vehicle and record the amperage reading. Then compare the reading to manufacturer’s specifications
Step 5. If the pump did not turn on at all, remove the electrical connector on the pump
Step 6. Set DC volts on the meter, place the positive meter lead on the terminal of the positive wire in the connector and the negative meter lead on the terminal of the negative wire
Step 7. Turn the key to the run position, if the voltage reading is same as battery voltage, then the pump has failed
The steps are for reference only, and we we recommend you to ask the technician to do the test or replacement.
How to Replace the Electric Fuel Pump?
Step 1. Turn the engine off and locate the fuel pump fuse, then pull the fuse out and restart engine to relieve the engine’s pressure. Disconnect the negative battery terminal after the engine dies.
Step 2. There are two kinds of electric fuel pumps. The first type is placed inside the gas tank while the other is placed beneath the car.
A. If your pump is under the car, jack up car and support it with jack stands. Sliding under the car and follow the fuel lines toward the fuel tank. Once the pump is located, unbolt it and then let it drop slowly.
B. If your pump is inside the fuel tank, it is usually under the carpet or beneath the back seat. Pop it open to unbolt the pump.
Step 3. Disconnect the fuel lines from the fuel pump, make sure you have someone else ready to block them so gas doesn't leak out.
Step 4. Install the new pump. Reconnect the fuel lines and put everything else back in place. Refill the tank and start the engine to test.
- 【Service】We are professional fuel pump sellers. If you have any questions about the part, please contact us before purchasing it, we'll reply you within 24 hours.
- 【Compatible Vehicles】Compatible with Hyundai Santa Fe Limited 3.3L 2007-2009. Compatible with Hyundai Santa Fe GLS 2.7L 2007-2009. Compatible with Hyundai Santa Fe SE 3.3L 2007-2009.
- 【Interchange Part No.】Compatible with 311100W000,31110-0W000,E8821M.
- 【Package】Contains complete Electric Fuel Pump Assembly Kit Fuel Pump as the pic show.
- 【Compatibility】Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and necessary components.
Product features
Why Choose WATERWICH?
WATERWICH Fuel Pumps are Built in new technical turbo pump for less noise and stronger power. And with New Injection molding technology, upgrade plastic components Fuel Pump, more stabilized and better corrosion resistance. Strict production process quality control which ensures the pumps quality and All the pumps are 100% tested before being shipped make it a complete line of electronic fuel pumps you need !
Compatible Vehicles
Compatible with Hyundai Santa Fe Limited 3.3L 2007-2009.
Compatible with Hyundai Santa Fe GLS 2.7L 2007-2009.
Compatible with Hyundai Santa Fe SE 3.3L 2007-2009.
Interchange Part NO.
Compatible with 311100W000,31110-0W000,E8821M.
Upgrade Designed Based on Feedback From Most Customer
- OE Fits:Accurate Compatiable Eletric Plug 1:1 original design adapted plug.
- Built in new technical turbo pump for stronger fuel supply and longer life.
- Strict level sensor design,Exact range compatiable 1:1 original design, ensure accurate fuel gauge reading.
- New Injection molding technology, upgrade plastic components, Upgraded the sealing and durability.ensure corrosion protection,less noise.
Keep The Following Habits
- Always clean the cover, outside and inside of the tank, replace the old strainer and fuel pipe.
- Replace the old fuel with clean standard fuel.Always use high quality gasoline.
- Always keep enough fuel in the tank for the pump to be submerged in gas.
- Replace the Filter on a regular basis.
Replace Your Fuel Pump
- WATERWICH Fuel Pumps are designed as plug-and-play exact fit replacements-so customers can install them with complete confidence
- Replace Your Fuel Pump When:
- Vehicle makes high pitched sound when the engine is first engaged;
- Sudden trouble accelerating;
- Low fuel pressure or stalling.
- Petrol or diesel fumes.
- Abnormal noise.
- Unable to start.
WATERWICH Fuel Pump Advantage
- Built in new technical turbo pump
- New Injection molding technology, upgrade plastic components
- Strict level sensor design make accurate fuel gauge reading.
- OEM Fit
- Less noise
- Long life
- Stronger power
- Current stability
- Corrosion Protection
Product description
HFP replacement fuel pumps are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability using multiple fuel blends. Each HFP fuel pump kit comes with a LIFETIME free replacement warranty. If there is any issue of any kind at any time, contact us and we will replace the pump free of charge—including free shipping - HFP pumps meet or exceed OEM specifications in fit, form and function - Polished corrosion-resistant case to help minimize seizing during non-operation - Specifically designed for quiet operation. HFP pumps do NOT whine like other aftermarket fuel pumps. - Compatible with multiple fuel types, including regular and ethanol-infused gasoline (E85) This replacement pump will replace the pump included as part of your OEM assembly at vehicle manufacture. It is efficient, quiet, long lasting, and designed to maintain the high pressures that modern fuel injected vehicles require. The HFP manufacturing quality control process is rigorous and comprehensive and pumps are designed to last for 30,000 hours / 100,000 miles. This is a replacement pump that will be a direct fit replacement in the OEM stock fuel pump assembly/housing. In order to use this replacement pump kit, you will need to reuse your original Module/Assembly/Sending Unit. But the Module hardly ever fails (if your gas gauge works, the Module is usually fine and reusable). Thaxt’s one of the reasons you’re saving—we don’t insist you replace the whole Assembly. We just provide a replacement for the failed electric pump.
- An exact fuel flow replacement for the pump inside the in-tank assembly. Comes with everything needed for trouble-free installation—including the all-important strainer PLUS a replacement fuel regulator
- Designed and constructed for problem free operation in excess of 100,000 miles
- Meets or exceeds OEM specifications in fit, form and function and compatible with modern ethanol-infused pump gasoline. Designed for use with E85 and ethanol
- Ships from the USA and support is provided by native English speakers
- Replaces OEM Part: Lance 17500-Z4B-0001Yamaha 33D-13907-00-
- 100% Direct-Fit, Drop-In OEM Replacement - No Modification Necessary. NOTE: Installation kit components may vary from picture based on each model's unique requirements. (Please contact us for any additional installation components you may need).
- Compatible with modern ethanol-infused pump gasoline.
- This pump is designed and constructed for problem free operation in excess of 100,000 miles or 30,000 hours.
- Specifically designed for quiet operation.
- Replaces Can-Am 709000759, 709000362, 709000270
User questions & answers
Question: | What pressure does this pump generate also what is the current/power consumption |
Answer: | I believe it will fit. The 600 and 610 have pretty much the same motors. The fuel pump works by the crankcase pressure. I changed my oil twice as I had fuel get inside my crankcase. Be sure to change it. |
Question: | Will this fit 2016 can am maverick 1000 turbo |
Answer: | 1/4” ID fuel line |
Question: | Will this fit my 2013 650 outlander xt model 2pdd |
Answer: | No, it is for gas models 610 and SX 2005-2020. |
Question: | Will this fit 2014 maverick xrs 1000??? thanks |
Answer: | It is a fuel Pump Assembly comes with the fuel pump. |
Product features
OEM Replacement - 100% Direct Fit
The Quantum Experience
Product description
HFP replacement fuel pumps are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability using multiple fuel blends. Each HFP fuel pump kit comes with a LIFETIME free replacement warranty. If there is any issue of any kind at any time, contact us and we will replace the pump free of charge—including free shipping - HFP pumps meet or exceed OEM specifications in fit, form and function - Polished corrosion-resistant case to help minimize seizing during non-operation - Specifically designed for quiet operation. HFP pumps do NOT whine like other aftermarket fuel pumps. - Compatible with modern ethanol-infused pump gasoline. Compatible with multiple fuel types, including regular and ethanol-infused gasoline (E85) This replacement pump will replace the pump included as part of your OEM assembly at vehicle manufacture. It is efficient, quiet, long lasting, and designed to maintain the high pressures that modern fuel injected vehicles require. The HFP manufacturing quality control process is rigorous and comprehensive and pumps are designed to last for 30,000 hours / 100,000 miles. This is a replacement pump that will be a direct fit replacement in the OEM stock fuel pump assembly/housing. In order to use this replacement pump kit, you will need to reuse your original Module/Assembly/Sending Unit. But the Module hardly ever fails (if your gas gauge works, the Module is usually fine and reusable). That’s one of the reasons you’re saving—we don’t insist you replace the whole Assembly. We just provide a replacement for the failed electric pump. 204250212, 204560418, 204560289, 270600003, 270600012, 270600015, 270600029, 270600087, 270600089, 204560334, 275500464, 270600056, 270600031, 293250088, 275500641, 275500500, 275500432, 275500502, 275500540, 204560259, 204560400, 275500622, 75500585
- An exact-fit replacement for the pump inside the in-tank assembly. Comes with everything needed for trouble free installation—including the all-important strainer
- Designed and constructed for problem-free operation in excess of 30,000 hours / 100,000 miles
- Meets or exceeds OEM specifications in fit, form and function. Compatible with multiple fuel types, including regular and ethanol-infused gasoline (E85)
- Ships from the USA, and support is provided by native English speakers
- Replaces OEM Part: 204250212, 204560418, 204560289
Product description
Features:
* 100% Brand New In Factory Original Package. Not refurbished or re-manufactured parts.
* We provide 1 year warranty on all components
* Made of High Quality & Durable Material That Meets OE Standard -- All The Parts We Use Are The Highest Standard In The Industry
* Each product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilities with exquisite craftsmanship. 100% mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability
- This fuel pump will fit Kawasaki/Suzuki multiple motorcycles. Please use amazon's part finder filter to confirm if this item will fit your model
- Specification: Flow Rate: 65LPH; Currents: 4.2A; Voltage: 12V; Operating Pressure: 3 Bar
- Installation: Direct Replacement. Some Models May Have Different Strainers. Please Re-use Your Original One If It's Different From The One In The Package
- Warranty: 1 Year
- Package Included: 1pc New High Performance Fuel Pump With Strainer
Latest Reviews
View all
Gnc Detox Cleanses
- Updated: 06.02.2023
- Read reviews

Pencil With Erasers
- Updated: 21.03.2023
- Read reviews

Mistine Masks
- Updated: 13.05.2023
- Read reviews

Cordless Impact Wrench Dewalt
- Updated: 07.02.2023
- Read reviews

Pantry Cabinets
- Updated: 01.04.2023
- Read reviews