13 best msd fuel pumps

Product description

Multi port EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range. This high pressure and high flow fuel pump features a roller vane pump mechanism which is extremely resistant to clogging and jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The nipple inlet is 3/8 inch With a 5/16 inch Outlet. The wire terminals feature brass studs for secure connections. Made in the USA, the pump is ideal for use as a booster for nitrous oxide applications, or as a stand alone pump for multi port EFI systems on engines up to approximately 500 HP capable of 43 gph at 40 psi.

• High pressure electric fuel pump
• Great for fuel management systems and nitrous booster
• 3/8 hose nipple inlet
• 5/16 hose nipple outlet
• Fit type: Vehicle Specific

User questions & answers

Question:	I’m using it on a 4.8 ls swap would it work for it I need to run the psi at 58psi
Answer:	I had problems finding the ice-maker for my GE Refrig. The main problem is finding one withthe correct plug to plug-in in the freezer. Once I found a plug match it worked great.
Question:	What is the pressure of this pump in psi
Answer:	Not sure but not happy with this product. It makes lots of noises and the ice is big! Wish I had stuck with the old one.
Question:	can this pump run for a short time against a dead head
Answer:	Yes- This high-quality ice maker kit, an original factory replacement part is compatible with PFSS6PKWBSS.
Question:	will this work for a ls swap 5.3 engine
Answer:	7 cube

Product description

Walbro universal fuel pump GSL392 is one of the most popular fuel pumps made by Walbro. is an ideal upgrades for: GSL392 fuel pump is used in vehicles for racing or performance purposes where higher pressure fuel is necessary. Turbocharged, Supercharged.- with faulty inline fuel pumps, expensive or hard to replace in-tank fuel pumps. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour. Walbro GSL392 255LPH High Pressure Inline Fuel Pump are extremely popular upgrades to vehicles with engine and performance modifications, supporting up to 650 horse power. - Pressure: 255 (LPH) Liters Per Hour- AMP: 20 - OE-proven second generation. - Fits most EFI applications including turbo and supercharged. - Variety of pressures and flows available, including high pressure performance.- All metal shell including inlet and outlet. - 10mm x 1mm threaded inlet and outlet accept a variety of fittings. - The 400-939 kit include two standard universal fittings which can connect to any 5/16 inch hose.- Lightweight, compact design. - QS9000 certified. - Made in USA

• OE-proven second generation
• Fits most EFI applications including turbo and supercharged
• Variety of pressures and flows available, including high pressure performance
• All metal shell including inlet and outlet
• 10mm x 1mm threaded inlet and outlet accept a variety of fittings
• QS9000 certified

User questions & answers

Question:	Please , is it work with gasoline
Answer:	For whatever reason I did not find a correspondence between the model number on the manf tag on my ice maker, and the model numbers of available ice makers. Ultimately, the final successful selection was based on correspondence to image and described functions.
Question:	Can I use this pump to replace Holley
Answer:	There are 2 screws that hold the ice maker in place on the side wall of the freezer. The plug location works. If yours has the round cap with what looks like an outlet, this pops off to plug in the unit
Question:	Im putting on a boat i have to put above the tank about 6". Will this pull that amount of lift
Answer:	I put this in my GE and it works great
Question:	What proof is there this is an authentic Walbro product? Price is not consistent with their listed distributors
Answer:	The plug on the ice maker and fridge were the same but turned in opposite direction and I had to remove the cover and flip the plug on the fridge. And it works great. Really nice to have ice on hand all the time now.

• Package includes: 1x Fuel Pump Module ; 2x Retaining Straps; 4x Metal O-rings (Hose Clamp); Other Accessories as pictures show
• Features: Fuel Pump, Electric, External, Universal, 43 gph, 40 psi, 3/8 in. Hose Barb Inlet, 5/16 in, Hose Barb Outlet, Each.
• Cross part number: MSD#2225
• MSD 2225 High Pressure In Line Electric Fuel Pump
• Warranty Period: One Year Unlimited Miles.Warranty Coverage: With respect to any defect and/or fault occurring during the period of warranty, Powerco will, to the best of its knowledge, help the customer verify the root cause, new items or accessories can be reshipped, depending on the verification result;Man-made damage and any cost of maintenance and repair paid by the customer are not covered by our warranty.Any issue please contact Powerco firstly.

User questions & answers

Question:	Is there an internal shutoff? Or will I need to wire one up
Answer:	NO, you need part# WR30X10093
Question:	Will this work with diesel fuel
Answer:	There is a knob on the front-left of the ice maker. Need to take off the small cover and use a screw driver to adjust the water flow. The instruction goes over the process. Good luck.
Question:	Hi guys is this capable on any vehicle? like i have mitsubishi pajero io 2001 model. i have a problem of very low acceleration specially up hill
Answer:	Yes that is correct.
Question:	Are there an issues with supplying fuel to a stock 94 454 with TBI in tank pump still works
Answer:	This is your ice maker 100%. Buy with confidence.

Product features

ABOUT POWERCO

POWERCO Located in California, is one of the largest automotive aftermarket parts provider in North America.We are dedicated to provide the best fuel pump selection, the latest cutting edge technology, and the best overall shopping experience. We are constantly saturating our inventory with the best products available on the market today. Our goal is to make car repair and maintenance affordable, convenient, and transparent. providing a full selection, and the best service possible.

Confirm compability

Package includes:

1x Fuel Pump Module

2x Retaining Straps

4x Metal O-rings (Hose Clamp)

Other Accessories as pictures show Cross part number:

MSD#2225

OEM replacement

POWERCO fuel pumps is designed to deliver quiet operation for performance, durability, and resistance to contamination.

Our modern production equipment and manufacturing technology, strict production process quality control, ensures the unmatched product quality.

• Cross Reference SP1154 E8228 P5000 Universal Electric Fuel Pump; 75 - 75 PSI; 45 - 45 GPH
• Compatible With E8228, P5000, F4239, HP4239, P90043
• 【SAFETY & RELIABILITY】Upgraded Return/Flexible fuel Line:Improving durability to abrasion of tube,Upgraded the sealing and durability.Improves stability and reduce noise over OEM
• 【Package Includes】1x Fuel Pump Module; 1x Retaining strap; 1x Hose Clamp; 1x Small rubber o-ring
• Warranty Period: One Year Unlimited Miles.Warranty Coverage: With respect to any defect and/or fault occurring during the period of warranty, Powerco will, to the best of its knowledge, help the customer verify the root cause, new items or accessories can be reshipped, depending on the verification result;Man-made damage and any cost of maintenance and repair paid by the customer are not covered by our warranty.Any issue please contact Powerco firstly.

User questions & answers

Question:	Is this fuel pump position sensitive ? Can it be mounted 4 inches above the tank sending unit horizontally ? Are the connection fittings 3/8th's
Answer:	Worthless product. Ray K.
Question:	is the pump self-priming? I plan to use it as a fuel (petrol) transfer pump
Answer:	It's thinner. What do you want it to do to the wooden desk?
Question:	need a fuel pump with 15psi will this work
Answer:	Yes Cleaned my brushes great Outdoor oil pant
Question:	Will this work for a 98 Chevy camero
Answer:	Not a rust. It even hardly removes the regular paints. Not a good product.

Product features

About POWERCO

POWERCO Located in California, is one of the largest automotive aftermarket parts provider in North America.We are dedicated to provide the best fuel pump selection, the latest cutting edge technology, and the best overall shopping experience. We are constantly saturating our inventory with the best products available on the market today. Our goal is to make car repair and maintenance affordable, convenient, and transparent. providing a full selection, and the best service possible.

Confirm compability

OEM replacement

Tips

1. Always clean the cover, outside and inside of the tank, replace the old strainer and fuel pipe.



2. Replace the old fuel with clean standard fuel.Always use high quality gasoline.



3. Always keep enough fuel in the tank for the pump to be submerged in gas.



4. Replace the Filter on a regular basis.

Product description

The controller allows you to increase voltage based on boost. The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 &ndash22 volts and up to 30 psi which can all be set and adjusted from your PC with MSD&rsquos easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump. Features The Booster allows you to make your boost adjustments through a PC for improved control and accuracy. Voltage output is adjustable up to 22 volts at 15 psi of boost For use with stock electric fuel pumps or secondary booster pumps NOTE The Fuel Pump Booster cannot be used on fuel systems without a return line (pulse-modulated pumps). This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles 1965 and older U.S. manufactured California Certified vehicles 1967 and older U.S. manufactured Federally Certified vehicles 1967 and older Foreign manufactured vehicle Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.

• Fuel Pump Boost Control
• Package Dimensions: 25.4 L x 18.541 H x 19.558 W (centimeters)
• Package Weight : 3.5 pounds
• Made in United States

User questions & answers

Question:	Does this item come with the installation wiring harness
Answer:	Yes with a small tooth brush.
Question:	I AM MISSING SOFTWARE CD
Answer:	The spec sheet on Sunnyside's website says this is Synthetic isoparaffinic hydrocarbon. It is the same thing as lighter fluid for Zippo style lighters. It is also called Naphtha. But that can be misleading, as there are various combinations of hydrocarbons used in Naphtha. VM&P Naphtha is more votile and dries faster than "regular" Naphtha. Mineral Spirits is also very similar. If you only need a little, buy a can of lighter fluid. I keep some on hand as it's great for removing loosening tape and stickers from stuff. You can buy a can of lighter fluid here on Amazon or most any drug store or Wally World (Zippo and Ronsonol common brands. if you need more, this is a decent price for a quart. If you need a lot it's sold in gallons as well.

Product description

FUEL PUMP

Product description

MSD was the first company to develop and offer the multiple sparking, capacitive discharge ignition for engines. The line of MSD 6-Series Ignitions are the most popular aftermarket ignitions in the world due to our race-proven performance on the track and our reliability on the street! Racers never stop experimenting as they search for every way to wring out more power or handling performance to to gain an edge over the competition. The team at MSD is no different as we strive to deliver the products you need to meet your performance goals. We continue to innovate and invent components and technology that deliver performance and reliability with products that are easy to use and install. Over the course of 40-plus years, MSD Performance has been driving the development of innovative components that helped shape the way our cars race and perform. From super speedways to road courses, land speed racing to top fuel dragsters, and of course your traditional hot rod, MSD has provided the components to fire nearly anything in motorsports. Early on, MSD focused squarely on ignition systems with revolutionary products like the multiple sparking CD ignition, timing and rev controls, billet aluminum distributors and the Pro-Mag, an incredible breakthrough in power and endurance. Today MSD is developing electronics for your entire powertrain. The Atomic EFI systems for the LS engine platform and throttle body are now complemented with a transmission controller. Our DynaForce Starters and Alternators ensure that your engine cranks over to fire up and the Alternators keep it charged. MSD is poised to deliver components that work and communicate together to provide performance and value.

• Molded for high quality materials
• Quality MSD components
• Provides quality performance
• Easy installation
• Durable and long lasting

Product description

Mr. Gasket's high performance electric fuel pump is a direct bolt-on replacement for Holley Fuel Pump. Our products are 100 percent pressure tested for guaranteed performance and reliability. Features an in-line style rotor and vane pump design and 3/8 inch NPT inlet and outlet. This lightweight pump includes mounting bracket and hardware and is universal for all carbureted engines.

• Mr Gasket Electric Fuel Pump 95 GPH 7 PSI Gasoline Light Weight High Flow

User questions & answers

Question:	Does this come with the 3/8 inlet and outlet fittings
Answer:	Yes
Question:	Can this pump be used for diesel
Answer:	No it’s fumms are poison , lighter fluid only
Question:	In the ad it says 7psi I ordered the pump in the packaging says it's 14psi which is correct
Answer:	Yes , is clear
Question:	does this pump have a regulator
Answer:	Yes

Product description

FUEL PUMP

• Budget friendly inline fuel delivery kit perfect for an LS swap
• Features a high quality 255 lph MSD fuel pump capable of 43 gph @ 40 psi or 39 gph at 80 psi
• All in one filter/regulator is fixed at 58 psi
• Return port fixed on filter/regulator offering a shorter return line to the fuel tank
• Includes adapters to AN6 for filter/regulator and hose nipples for 3/8" inlet and 5/16" outlet on fuel pump

User questions & answers

Question:	Can i put this on a gravity fed tank that i want to relocate towards the back since i fid an ls swap on a 1968 Chevy c10 and dont want to use the old
Answer:	Yes gravity fed tank will work fine just mout the pump as close to the tank as possible
Question:	Where is the fuel psi regulator
Answer:	In the fuel filter. Works great on my ls swap.
Question:	Will this work on ls swap in a 95 Chevy truck, with factory fuel tank
Answer:	You need a sump I believe. Mine is on a after market fuel cell.
Question:	Will this pump work on an LS3 swap
Answer:	I put it on 5.3 swap, so far is great. A little loud but besides that car runs great

Product description

For engines up to 525 HP, the standard fuel package includes all of the parts needed to upgrade a vehicle's fuel system to Atomic standards. Parts included: PWM fuel pump, pre-filter, post-filter, 15 ft. 3/8 In. fuel line, mounting hardware.

• The easiest way to convert to electronic fuel injection
• Return less fuel system for the easiest installation
• Traditional styling with modern appeal
• Complete kits available
• Good up to 525 horse power, and 1000 CFM

• Inline/ External (Mounts Outside of Tank)
• Flow: 255LPH at 43PSI & 12V, Minimum Voltage: 12V
• Operating Pressure: 35-120 PSI (final fuel pressure set by regulator)
• Please check your car information before purchase.

User questions & answers

Question:	which end does the fuel flow? the one I received does not distinguish this important detail
Answer:	You may be able to get a chrome effect with a spray can, but results will not be as "chrome" as the pieces in your car which is achieved by an electrostatic process at the factory. There is also a process you can do to achieve this chrome result but it is a rather intensive process. If you want to match the chrome in your car, easiest way is to buy new parts. Hope this helps.
Question:	Will this fuel pump work on throttle body
Answer:	I did! Now, having said that... I'm sure it depends what glass, where, under what conditions, circumstances etc. are 'safe'. But what I painted is really quite lovely and so far is holding up beautifully.
Question:	Does this pump, the regulator so I can regulate the pressure
Answer:	Yes, other than stirring it up well, it is ready to use. But regarding "can I use it on the wall," I have to pause. What type of wall are you painting?This paint is for METAL only to my knowledge. You would NOT want to use it on drywall or wood. I do not know if you could use it on brick. Perhaps I am wrong about this but I would never use it on a "wall." If you let me know what type of wall you will be painting I would be happy to try to answer. I would suggest you go on line to the Rust-Oleum website and read up on this type of paint. I have never used it for anything but METAL so be careful! I have painted many, many metal "things" over the years with this paint, mailboxes, steel oil tank, iron re-bar, all sorts of metal.
Question:	Can i use it for diesel
Answer:	Yes, I sprayed in onto a boat. Recommendation for thinning and thinners are on the label.

Product features

Specification:

1. Installation Location: Inline/ External (Mounts Outside of Tank);
2. Operating Pressure: 35-120 PSI (final fuel pressure set by regulator);
3. Flow Rate: 255LPH at 43PSI & 12V;
4. Connector size: AN6-12*1.5;
5. Minimum Voltage: 12V

Complete Accessories

• 1 x GSL392 255LPH Fuel Pump;
• 2 x 128-3039 -6AN Fittings;
• 2 x Crush Washers & 2 x Nuts;
• 2 x Electrical Connections & 2 x Starlock Washers;
• 2 x Mounting Clamps & 1 x Mounting Cushion.

Production Inspection

1. 100% quality inspection not only before shippment but through the whole production process.

2. Each step of production multiple quality control checks are performed to ensure the quality of every parts.

3. Accurate design meets or exceeds OE specifications.

Easy Installation

1. Replacing the new filter or strainer.

2. Cleaning or replacing the fuel tank professionally.

3. Inspecting, repairing or replacing suspect vehicle connectors and wiring.

4. Rerferring to your install instruction for proper procedures.

Technology

MOSTPLUS‘s modern production equipment and manufacturing technology, strict production process and quality control to ensure unparalleled quality.

Product description

AEM's High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The AEM High Flow In-Tank Fuel Pump flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 horsepower at 43 PSI. Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline, Outlet Fitting: 8 mm hose clamp. Offset

• Designed for high output naturally aspirated and forced induction EFI vehicles and tested to flow 340 lph at 40 PSI
• 39 millimeter diameter fits most applications; Offset inlet design eases installation and each pump individually tested. Min Voltage Input - 6 volts. Max Voltage Input - 18 volts
• For gasoline vehicles (pump life may be diminished when used with E85 fuel); kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead
• Power rating given at 43 PSI, 13.5 Volt at the pump with a BSFC of .5, flow capability for horsepower support is ultimately dependent on fuel hose diameter and system electrical voltage and amperage capabilities
• In-Tank design
• Fit type: Universal Fit

User questions & answers

Question:	Hello, what is the difference between the two AEM fuel pumps? 50-1000 and
Answer:	The container only states don't use on plastic, linoleum, rubber or sheet rock/ plaster. I'm using it for wood, glass and formica countertops. Hope this helps. You may need to email the company for the best information. Cheers Michael
Question:	Will this fit my toyota altezza
Answer:	we have used it on wood to remove almost everything except marine grade. We even used it on brass so making a guess it might
Question:	It does not fit my truck, but I am trying to find out if it will provide even less fuel than a standard pump when a cool air intake mixes better
Answer:	Pettit Paint Bio-Blast Bottom Paint Remover PET-9051G
Question:	does this item include the wiring harness for installation
Answer:	Yes, but make sure you clean the wood surface using "Mineral Sprits" and the give it a full 24 hours to dry then apply the stain